| Age | Commit message (Collapse) | Author |
|---|
|
git://git.linaro.org/kernel/linux-linaro-stable.git
* linux-linaro-lsk-v4.4-android: (395 commits)
Linux 4.4.126
net: systemport: Rewrite __bcm_sysport_tx_reclaim()
net: fec: Fix unbalanced PM runtime calls
ieee802154: 6lowpan: fix possible NULL deref in lowpan_device_event()
s390/qeth: on channel error, reject further cmd requests
s390/qeth: lock read device while queueing next buffer
s390/qeth: when thread completes, wake up all waiters
s390/qeth: free netdevice when removing a card
team: Fix double free in error path
skbuff: Fix not waking applications when errors are enqueued
net: Only honor ifindex in IP_PKTINFO if non-0
netlink: avoid a double skb free in genlmsg_mcast()
net/iucv: Free memory obtained by kzalloc
net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface
net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred
l2tp: do not accept arbitrary sockets
ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()
dccp: check sk for closed state in dccp_sendmsg()
net: Fix hlist corruptions in inet_evict_bucket()
Revert "genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs"
...
Conflicts:
include/linux/usb/quirks.h
Change-Id: I125065cef66846e4cdee799f4b34d07c309d353e
|
|
|
|
[ Upstream commit 06cceedcca67a93ac7f7aa93bbd9980c7496d14e ]
cgroup could be throttled to a limit but when all cgroups cross high
limit, queue enters a higher state and so the group should be throttled
to a higher limit. It's possible the cgroup is sleeping because of
throttle and other cgroups don't dispatch IO any more. In this case,
nobody can trigger current downgrade/upgrade logic. To fix this issue,
we could either set up a timer to wakeup the cgroup if other cgroups are
idle or make sure this cgroup doesn't sleep too long. Setting up a timer
means we must change the timer very frequently. This patch chooses the
latter. Making cgroup sleep time not too big wouldn't change cgroup
bps/iops, but could make it wakeup more frequently, which isn't a big
issue because throtl_slice * 8 is already quite big.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9b54d816e00425c3a517514e0d677bb3cec49258 upstream.
If blkg_create fails, new_blkg passed as an argument will
be freed by blkg_create, so there is no need to free it again.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change-Id: I754250669891307b0deab2bdab1bd01512713f79
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
|
|
git://git.linaro.org/kernel/linux-linaro-stable.git
* linux-linaro-lsk-v4.4-android: (733 commits)
LSK-ANDROID: memcg: Remove wrong ->attach callback
LSK-ANDROID: arm64: mm: Fix __create_pgd_mapping() call
ANDROID: sdcardfs: Move default_normal to superblock
blkdev: Refactoring block io latency histogram codes
FROMLIST: arm64: kpti: Fix the interaction between ASID switching and software PAN
FROMLIST: arm64: Move post_ttbr_update_workaround to C code
FROMLIST: arm64: mm: Rename post_ttbr0_update_workaround
sched: EAS: Initialize push_task as NULL to avoid direct reference on out_unlock path
fscrypt: updates on 4.15-rc4
ANDROID: uid_sys_stats: fix the comment
BACKPORT: tee: indicate privileged dev in gen_caps
BACKPORT: tee: optee: sync with new naming of interrupts
BACKPORT: tee: tee_shm: Constify dma_buf_ops structures.
BACKPORT: tee: optee: interruptible RPC sleep
BACKPORT: tee: optee: add const to tee_driver_ops and tee_desc structures
BACKPORT: tee.txt: standardize document format
BACKPORT: tee: add forward declaration for struct device
BACKPORT: tee: optee: fix uninitialized symbol 'parg'
BACKPORT: tee: add ARM_SMCCC dependency
BACKPORT: selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables
...
Conflicts:
arch/arm64/kernel/vdso.c
drivers/usb/host/xhci-plat.c
include/drm/drmP.h
include/linux/kasan.h
kernel/time/timekeeping.c
mm/kasan/kasan.c
security/selinux/nlmsgtab.c
Also add this commit:
0bcdc0987cce ("time: Fix ktime_get_raw() incorrect base accumulation")
|
|
The current io_latency_state structure includes entries for read
and write requests. There are special types of write commands
such as sync and discard (trim) commands, and the current
implementation is not general enough if we want to separate
latency histogram for such special commands.
This change makes io_latency_state structure request-type neutral.
It also changes to print the latency average.
Signed-off-by: Hyojun Kim <hyojun@google.com>
|
|
|
|
commit 2b04e8f6bbb196cab4b232af0f8d48ff2c7a8058 upstream.
we need to take care of failure exit as well - pages already
in bio should be dropped by analogue of bio_unmap_pages(),
since their refcounts had been bumped only once per reference
in bio.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 34d9715ac1edd50285168dd8d80c972739a4f6a4 ]
Once blk_set_queue_dying() is done in blk_cleanup_queue(), we call
blk_freeze_queue() and wait for q->q_usage_counter becoming zero. But
if there are tasks blocked in get_request(), q->q_usage_counter can
never become zero. So we have to wake up all these tasks in
blk_set_queue_dying() first.
Fixes: 3ef28e83ab157997 ("block: generic request_queue reference counting")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.linaro.org/kernel/linux-linaro-stable.git
* linux-linaro-lsk-v4.4-android: (510 commits)
Linux 4.4.103
Revert "sctp: do not peel off an assoc from one netns to another one"
xen: xenbus driver must not accept invalid transaction ids
s390/kbuild: enable modversions for symbols exported from asm
ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data
btrfs: return the actual error value from from btrfs_uuid_tree_iterate
ASoC: rsnd: don't double free kctrl
netfilter: nf_tables: fix oob access
netfilter: nft_queue: use raw_smp_processor_id()
spi: SPI_FSL_DSPI should depend on HAS_DMA
staging: iio: cdc: fix improper return value
iio: light: fix improper return value
mac80211: Suppress NEW_PEER_CANDIDATE event if no room
mac80211: Remove invalid flag operations in mesh TSF synchronization
drm: Apply range restriction after color adjustment when allocation
ALSA: hda - Apply ALC269_FIXUP_NO_SHUTUP on HDA_FIXUP_ACT_PROBE
ath10k: set CTS protection VDEV param only if VDEV is up
ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()
ath10k: ignore configuring the incorrect board_id
ath10k: fix incorrect txpower set by P2P_DEVICE interface
...
Conflicts:
drivers/media/v4l2-core/v4l2-ctrls.c
kernel/sched/fair.c
Change-Id: I48152b2a0ab1f9f07e1da7823119b94f9b9e1751
|
|
Conflicts due to AOSP's backported commits:
fs/f2fs/crypto.c
fs/f2fs/crypto_fname.c
Deleted by AOSP commit c1286ff41c2f ("f2fs: backport from (4c1fad64 -
Merge tag 'for-f2fs-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs)")
fs/f2fs/crypto_key.c
fs/f2fs/data.c
fs/f2fs/file.c
AOSP commit 13f002354db1 ("f2fs: catch up to v4.14-rc1")
override most of stable 4.4.y changes.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
|
|
git://git.linaro.org/kernel/linux-linaro-stable.git
* linux-linaro-lsk-v4.4-android: (546 commits)
Linux 4.4.93
x86/alternatives: Fix alt_max_short macro to really be a max()
USB: serial: console: fix use-after-free after failed setup
USB: serial: qcserial: add Dell DW5818, DW5819
USB: serial: option: add support for TP-Link LTE module
USB: serial: cp210x: add support for ELV TFD500
USB: serial: ftdi_sio: add id for Cypress WICED dev board
fix unbalanced page refcounting in bio_map_user_iov
direct-io: Prevent NULL pointer access in submit_page_section
usb: gadget: composite: Fix use-after-free in usb_composite_overwrite_options
ALSA: line6: Fix leftover URB at error-path during probe
ALSA: caiaq: Fix stray URB at probe error path
ALSA: seq: Fix copy_from_user() call inside lock
ALSA: seq: Fix use-after-free at creating a port
ALSA: usb-audio: Kill stray URB at exiting
iommu/amd: Finish TLB flush in amd_iommu_unmap()
usb: renesas_usbhs: Fix DMAC sequence for receiving zero-length packet
KVM: nVMX: fix guest CR4 loading when emulating L2 to L1 exit
crypto: shash - Fix zero-length shash ahash digest crash
HID: usbhid: fix out-of-bounds bug
...
Conflicts:
drivers/cpufreq/cpufreq-dt.c
drivers/usb/dwc3/gadget.c
Change-Id: I1a24ad0bba307b56b5ddf1fd7c4832ffb73ad12f
|
|
This reverts commit 668cee82cd28d2c38a99f7cbddf3b3fd58f257b9 which was
commit f507b54dccfd8000c517d740bc45f20c74532d18 upstream.
Ben reports:
That function doesn't exist here (it was introduced in 4.13).
Instead, this backport has modified bsg_create_job(), creating a
leak. Please revert this on the 3.18, 4.4 and 4.9 stable
branches.
So I'm dropping it from here.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
|
|
|
|
commit 95d78c28b5a85bacbc29b8dba7c04babb9b0d467 upstream.
bio_map_user_iov and bio_unmap_user do unbalanced pages refcounting if
IO vector has small consecutive buffers belonging to the same page.
bio_add_pc_page merges them into one, but the page reference is never
dropped.
Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
[ Upstream commit c5082b70adfe8e1ea1cf4a8eff92c9f260e364d2 ]
If a GUID Partition Table claims to have more than 2**25 entries, the
calculation of the partition table size in alloc_read_gpt_entries() will
overflow a 32-bit integer and not enough space will be allocated for the
table.
Nothing seems to get written out of bounds, but later efi_partition() will
read up to 32768 bytes from a 128 byte buffer, possibly OOPSing or exposing
information to /proc/partitions and uevents.
The problem exists on both 64-bit and 32-bit platforms.
Fix the overflow and also print a meaningful debug message if the table
size is too large.
Signed-off-by: Alden Tondettar <alden.tondettar@gmail.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f507b54dccfd8000c517d740bc45f20c74532d18 upstream.
The job structure is allocated as part of the request, so we should not
free it in the error path of bsg_prepare_job.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
commit 4ddd56b003f251091a67c15ae3fe4a5c5c5e390a upstream.
Calling blk_start_queue() from interrupt context with the queue
lock held and without disabling IRQs, as the skd driver does, is
safe. This patch avoids that loading the skd driver triggers the
following warning:
WARNING: CPU: 11 PID: 1348 at block/blk-core.c:283 blk_start_queue+0x84/0xa0
RIP: 0010:blk_start_queue+0x84/0xa0
Call Trace:
skd_unquiesce_dev+0x12a/0x1d0 [skd]
skd_complete_internal+0x1e7/0x5a0 [skd]
skd_complete_other+0xc2/0xd0 [skd]
skd_isr_completion_posted.isra.30+0x2a5/0x470 [skd]
skd_isr+0x14f/0x180 [skd]
irq_forced_thread_fn+0x2a/0x70
irq_thread+0x144/0x1a0
kthread+0x125/0x140
ret_from_fork+0x2a/0x40
Fixes: commit a038e2536472 ("[PATCH] blk_start_queue() must be called with irq disabled - add warning")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In both legacy and mq path, req count of plug list is computed
before allocating request, so the number can be stale when falling
back to slept allocation, also the new introduced wbt can sleep
too.
This patch deals with the case by checking if plug list becomes
empty, and fixes the KASAN report of 'BUG: KASAN: stack-out-of-bounds'
which is introduced by Shaohua's patches of dispatching big request.
Change-Id: I00cdd180e44574aeb7167266b3aa04a28cf4cdc6
Fixes: 600271d900002(blk-mq: immediately dispatch big size request)
Fixes: 50d24c34403c6(block: immediately dispatch big size request)
Cc: Shaohua Li <shli@fb.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
(cherry pick from 0a6219a95f0b0690fb7094acb26002e7a4791197)
|
|
This is corresponding part for blk-mq. Disk with multiple hardware
queues doesn't need this as we only hold 1 request at most.
Change-Id: I2bf7fe5749d66e0192c08d16c4bb8d057ad8833f
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
(cherry pick from 600271d9000027c013c01be87cbb90a5a18c5c3f)
|
|
Currently block plug holds up to 16 non-mergeable requests. This makes
sense if the request size is small, eg, reduce lock contention. But if
request size is big enough, we don't need to worry about lock
contention. Holding such request makes no sense and it lows the disk
utilization.
In practice, this improves 10% throughput for my raid5 sequential write
workload.
The size (128k) is arbitrary right now, but it makes sure lock
contention is small. This probably could be more intelligent, eg, check
average request size holded. Since this is mainly for sequential IO,
probably not worthy.
V2: check the last request instead of the first request, so as long as
there is one big size request we flush the plug.
Change-Id: I034ee890eb799ea2c2ee2d38f80f880398f39f91
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
(cherry pick from 50d24c34403c62ad29e8b6db559d491bae20b4b7)
|
|
git://git.linaro.org/kernel/linux-linaro-stable.git
LSK 17.07 v4.4-android
* tag 'lsk-v4.4-17.07-android': (402 commits)
dt/vendor-prefixes: remove redundant vendor
Linux 4.4.77
saa7134: fix warm Medion 7134 EEPROM read
x86/mm/pat: Don't report PAT on CPUs that don't support it
ext4: check return value of kstrtoull correctly in reserved_clusters_store
staging: comedi: fix clean-up of comedi_class in comedi_init()
staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.
tcp: fix tcp_mark_head_lost to check skb len before fragmenting
md: fix super_offset endianness in super_1_rdev_size_change
md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
perf tools: Use readdir() instead of deprecated readdir_r() again
perf tests: Remove wrong semicolon in while loop in CQM test
perf trace: Do not process PERF_RECORD_LOST twice
perf dwarf: Guard !x86_64 definitions under #ifdef else clause
perf pmu: Fix misleadingly indented assignment (whitespace)
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf tools: Remove duplicate const qualifier
perf script: Use readdir() instead of deprecated readdir_r()
perf thread_map: Use readdir() instead of deprecated readdir_r()
perf tools: Use readdir() instead of deprecated readdir_r()
...
Conflicts:
Makefile
drivers/Kconfig
drivers/Makefile
drivers/usb/dwc3/gadget.c
Change-Id: Ib4aae2e34ebbf0d7953c748a33f673acb3e744fc
|
|
Conflicts:
arch/arm64/kernel/armv8_deprecated.c
arch/arm64/kernel/efi.c
arch/arm64/kernel/entry.S
arch/arm64/kernel/head.S
arch/arm64/kernel/hw_breakpoint.c
arch/arm64/mm/mmu.c
include/linux/memblock.h
mm/memblock.c
|
|
commit 39a169b62b415390398291080dafe63aec751e0a upstream.
get_disk(),get_gendisk() calls have non explicit side effect: they
increase the reference on the disk owner module.
The following is the correct sequence how to get a disk reference and
to put it:
disk = get_gendisk(...);
/* use disk */
owner = disk->fops->owner;
put_disk(disk);
module_put(owner);
fs/block_dev.c is aware of this required module_put() call, but f.e.
blkg_conf_finish(), which is located in block/blk-cgroup.c, does not put
a module reference. To see a leakage in action cgroups throttle config
can be used. In the following script I'm removing throttle for /dev/ram0
(actually this is NOP, because throttle was never set for this device):
# lsmod | grep brd
brd 5175 0
# i=100; while [ $i -gt 0 ]; do echo "1:0 0" > \
/sys/fs/cgroup/blkio/blkio.throttle.read_bps_device; i=$(($i - 1)); \
done
# lsmod | grep brd
brd 5175 100
Now brd module has 100 references.
The issue is fixed by calling module_put() just right away put_disk().
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Cc: Gi-Oh Kim <gi-oh.kim@profitbricks.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the 4.4.73 stable release
|
|
commit 223220356d5ebc05ead9a8d697abb0c0a906fc81 upstream.
The code in block/partitions/msdos.c recognizes FreeBSD, OpenBSD
and NetBSD partitions and does a reasonable job picking out OpenBSD
and NetBSD UFS subpartitions.
But for FreeBSD the subpartitions are always "bad".
Kernel: <bsd:bad subpartition - ignored
Though all 3 of these BSD systems use UFS as a file system, only
FreeBSD uses relative start addresses in the subpartition
declarations.
The following patch fixes this for FreeBSD partitions and leaves
the code for OpenBSD and NetBSD intact:
Signed-off-by: Richard Narron <comet.berkeley@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.linaro.org/kernel/linux-linaro-stable.git
LSK 17.05 v4.4-android
* tag 'lsk-v4.4-17.05-android': (266 commits)
BACKPORT: mm/slab: clean up DEBUG_PAGEALLOC processing code
Linux 4.4.70
UPSTREAM: arm64: hibernate: Support DEBUG_PAGEALLOC
BACKPORT: arm64: vmlinux.ld: Add mmuoff data sections and move mmuoff text into idmap
BACKPORT: arm64: Create sections.h
ANDROID: uid_sys_stats: defer io stats calulation for dead tasks
ANDROID: AVB: Fix linter errors.
ANDROID: AVB: Fix invalidate_vbmeta_submit().
drivers: char: mem: Check for address space wraparound with mmap()
nfsd: encoders mustn't use unitialized values in error cases
drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2
PCI: Freeze PME scan before suspending devices
PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms
tracing/kprobes: Enforce kprobes teardown after testing
osf_wait4(): fix infoleak
genirq: Fix chained interrupt data ordering
uwb: fix device quirk on big-endian hosts
metag/uaccess: Check access_ok in strncpy_from_user
metag/uaccess: Fix access_ok()
iommu/vt-d: Flush the IOTLB to get rid of the initial kdump mappings
...
|
|
|
|
This is the 4.4.69 stable release
|
|
commit 2859323e35ab5fc42f351fbda23ab544eaa85945 upstream.
When registering an integrity profile: if the template's interval_exp is
not 0 use it, otherwise use the ilog2() of logical block size of the
provided gendisk.
This fixes a long-standing DM linear target bug where it cannot pass
integrity data to the underlying device if its logical block size
conflicts with the underlying device's logical block size.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
|
|
|
|
commit 19b7ccf8651df09d274671b53039c672a52ad84d upstream.
Commit 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk")
introduced blk_integrity_revalidate(), which seems to assume ownership
of the stable pages flag and unilaterally clears it if no blk_integrity
profile is registered:
if (bi->profile)
disk->queue->backing_dev_info->capabilities |=
BDI_CAP_STABLE_WRITES;
else
disk->queue->backing_dev_info->capabilities &=
~BDI_CAP_STABLE_WRITES;
It's called from revalidate_disk() and rescan_partitions(), making it
impossible to enable stable pages for drivers that support partitions
and don't use blk_integrity: while the call in revalidate_disk() can be
trivially worked around (see zram, which doesn't support partitions and
hence gets away with zram_revalidate_disk()), rescan_partitions() can
be triggered from userspace at any time. This breaks rbd, where the
ceph messenger is responsible for generating/verifying CRCs.
Since blk_integrity_{un,}register() "must" be used for (un)registering
the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES
setting there. This way drivers that call blk_integrity_register() and
use integrity infrastructure won't interfere with drivers that don't
but still want stable pages.
Fixes: 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk")
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
[idryomov@gmail.com: backport to < 4.11: bdi is embedded in queue]
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.linaro.org/kernel/linux-linaro-stable.git
* linux-linaro-lsk-v4.4-android: (521 commits)
Linux 4.4.66
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
ARCv2: save r30 on kernel entry as gcc uses it for code-gen
nfsd: check for oversized NFSv2/v3 arguments
Input: i8042 - add Clevo P650RS to the i8042 reset list
p9_client_readdir() fix
MIPS: Avoid BUG warning in arch_check_elf
MIPS: KGDB: Use kernel context for sleeping threads
ALSA: seq: Don't break snd_use_lock_sync() loop by timeout
ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned type
ipv6: check raw payload size correctly in ioctl
ipv6: check skb->protocol before lookup for nexthop
macvlan: Fix device ref leak when purging bc_queue
ip6mr: fix notification device destruction
netpoll: Check for skb->queue_mapping
net: ipv6: RTF_PCPU should not be settable from userspace
dp83640: don't recieve time stamps twice
tcp: clear saved_syn in tcp_disconnect()
sctp: listen on the sock only when it's state is listening or closed
net: ipv4: fix multipath RTM_GETROUTE behavior when iif is given
...
Conflicts:
drivers/usb/dwc3/gadget.c
include/linux/usb/quirks.h
Change-Id: I490f766b9a530b10da3107e20709538e4536a99d
|
|
|
|
This is the 4.4.64 stable release
|
|
commit ac34f15e0c6d2fd58480052b6985f6991fb53bcc upstream.
When tearing down a block device early in its lifetime, userspace may
still be performing discovery actions like blkdev_ioctl() to re-read
partitions.
The nvdimm_revalidate_disk() implementation depends on
disk->driverfs_dev to be valid at entry. However, it is set to NULL in
del_gendisk() and fatally this is happening *before* the disk device is
deleted from userspace view.
There's no reason for del_gendisk() to clear ->driverfs_dev. That
device is the parent of the disk. It is guaranteed to not be freed
until the disk, as a child, drops its ->parent reference.
We could also fix this issue locally in nvdimm_revalidate_disk() by
using disk_to_dev(disk)->parent, but lets fix it globally since
->driverfs_dev follows the lifetime of the parent. Longer term we
should probably just add a @parent parameter to add_disk(), and stop
carrying this pointer in the gendisk.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffa00340a8>] nvdimm_revalidate_disk+0x18/0x90 [libnvdimm]
CPU: 2 PID: 538 Comm: systemd-udevd Tainted: G O 4.4.0-rc5 #2257
[..]
Call Trace:
[<ffffffff8143e5c7>] rescan_partitions+0x87/0x2c0
[<ffffffff810f37f9>] ? __lock_is_held+0x49/0x70
[<ffffffff81438c62>] __blkdev_reread_part+0x72/0xb0
[<ffffffff81438cc5>] blkdev_reread_part+0x25/0x40
[<ffffffff8143982d>] blkdev_ioctl+0x4fd/0x9c0
[<ffffffff811246c9>] ? current_kernel_time64+0x69/0xd0
[<ffffffff812916dd>] block_ioctl+0x3d/0x50
[<ffffffff81264c38>] do_vfs_ioctl+0x308/0x560
[<ffffffff8115dbd1>] ? __audit_syscall_entry+0xb1/0x100
[<ffffffff810031d6>] ? do_audit_syscall_entry+0x66/0x70
[<ffffffff81264f09>] SyS_ioctl+0x79/0x90
[<ffffffff81902672>] entry_SYSCALL_64_fastpath+0x12/0x76
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Reported-by: Robert Hu <robert.hu@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
This is the 4.4.62 stable release
|
|
commit 36e1f3d107867b25c616c2fd294f5a1c9d4e5d09 upstream.
While stressing memory and IO at the same time we changed SMT settings,
we were able to consistently trigger deadlocks in the mm system, which
froze the entire machine.
I think that under memory stress conditions, the large allocations
performed by blk_mq_init_rq_map may trigger a reclaim, which stalls
waiting on the block layer remmaping completion, thus deadlocking the
system. The trace below was collected after the machine stalled,
waiting for the hotplug event completion.
The simplest fix for this is to make allocations in this path
non-reclaimable, with GFP_NOIO. With this patch, We couldn't hit the
issue anymore.
This should apply on top of Jens's for-next branch cleanly.
Changes since v1:
- Use GFP_NOIO instead of GFP_NOWAIT.
Call Trace:
[c000000f0160aaf0] [c000000f0160ab50] 0xc000000f0160ab50 (unreliable)
[c000000f0160acc0] [c000000000016624] __switch_to+0x2e4/0x430
[c000000f0160ad20] [c000000000b1a880] __schedule+0x310/0x9b0
[c000000f0160ae00] [c000000000b1af68] schedule+0x48/0xc0
[c000000f0160ae30] [c000000000b1b4b0] schedule_preempt_disabled+0x20/0x30
[c000000f0160ae50] [c000000000b1d4fc] __mutex_lock_slowpath+0xec/0x1f0
[c000000f0160aed0] [c000000000b1d678] mutex_lock+0x78/0xa0
[c000000f0160af00] [d000000019413cac] xfs_reclaim_inodes_ag+0x33c/0x380 [xfs]
[c000000f0160b0b0] [d000000019415164] xfs_reclaim_inodes_nr+0x54/0x70 [xfs]
[c000000f0160b0f0] [d0000000194297f8] xfs_fs_free_cached_objects+0x38/0x60 [xfs]
[c000000f0160b120] [c0000000003172c8] super_cache_scan+0x1f8/0x210
[c000000f0160b190] [c00000000026301c] shrink_slab.part.13+0x21c/0x4c0
[c000000f0160b2d0] [c000000000268088] shrink_zone+0x2d8/0x3c0
[c000000f0160b380] [c00000000026834c] do_try_to_free_pages+0x1dc/0x520
[c000000f0160b450] [c00000000026876c] try_to_free_pages+0xdc/0x250
[c000000f0160b4e0] [c000000000251978] __alloc_pages_nodemask+0x868/0x10d0
[c000000f0160b6f0] [c000000000567030] blk_mq_init_rq_map+0x160/0x380
[c000000f0160b7a0] [c00000000056758c] blk_mq_map_swqueue+0x33c/0x360
[c000000f0160b820] [c000000000567904] blk_mq_queue_reinit+0x64/0xb0
[c000000f0160b850] [c00000000056a16c] blk_mq_queue_reinit_notify+0x19c/0x250
[c000000f0160b8a0] [c0000000000f5d38] notifier_call_chain+0x98/0x100
[c000000f0160b8f0] [c0000000000c5fb0] __cpu_notify+0x70/0xe0
[c000000f0160b930] [c0000000000c63c4] notify_prepare+0x44/0xb0
[c000000f0160b9b0] [c0000000000c52f4] cpuhp_invoke_callback+0x84/0x250
[c000000f0160ba10] [c0000000000c570c] cpuhp_up_callbacks+0x5c/0x120
[c000000f0160ba60] [c0000000000c7cb8] _cpu_up+0xf8/0x1d0
[c000000f0160bac0] [c0000000000c7eb0] do_cpu_up+0x120/0x150
[c000000f0160bb40] [c0000000006fe024] cpu_subsys_online+0x64/0xe0
[c000000f0160bb90] [c0000000006f5124] device_online+0xb4/0x120
[c000000f0160bbd0] [c0000000006f5244] online_store+0xb4/0xc0
[c000000f0160bc20] [c0000000006f0a68] dev_attr_store+0x68/0xa0
[c000000f0160bc60] [c0000000003ccc30] sysfs_kf_write+0x80/0xb0
[c000000f0160bca0] [c0000000003cbabc] kernfs_fop_write+0x17c/0x250
[c000000f0160bcf0] [c00000000030fe6c] __vfs_write+0x6c/0x1e0
[c000000f0160bd90] [c000000000311490] vfs_write+0xd0/0x270
[c000000f0160bde0] [c0000000003131fc] SyS_write+0x6c/0x110
[c000000f0160be30] [c000000000009204] system_call+0x38/0xec
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Douglas Miller <dougmill@linux.vnet.ibm.com>
Cc: linux-block@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
This is the 4.4.60 stable release
|
|
commit f5fe1b51905df7cfe4fdfd85c5fb7bc5b71a094f upstream.
Commit 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()")
changed current->bio_list so that it did not contain *all* of the
queued bios, but only those submitted by the currently running
make_request_fn.
There are two places which walk the list and requeue selected bios,
and others that check if the list is empty. These are no longer
correct.
So redefine current->bio_list to point to an array of two lists, which
contain all queued bios, and adjust various code to test or walk both
lists.
Signed-off-by: NeilBrown <neilb@suse.com>
Fixes: 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()")
Signed-off-by: Jens Axboe <axboe@fb.com>
[jwang: backport to 4.4]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Restore changes in device-mapper from upstream version]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
|
|
commit 79bd99596b7305ab08109a8bf44a6a4511dbf1cd upstream.
To avoid recursion on the kernel stack when stacked block devices
are in use, generic_make_request() will, when called recursively,
queue new requests for later handling. They will be handled when the
make_request_fn for the current bio completes.
If any bios are submitted by a make_request_fn, these will ultimately
be handled seqeuntially. If the handling of one of those generates
further requests, they will be added to the end of the queue.
This strict first-in-first-out behaviour can lead to deadlocks in
various ways, normally because a request might need to wait for a
previous request to the same device to complete. This can happen when
they share a mempool, and can happen due to interdependencies
particular to the device. Both md and dm have examples where this happens.
These deadlocks can be erradicated by more selective ordering of bios.
Specifically by handling them in depth-first order. That is: when the
handling of one bio generates one or more further bios, they are
handled immediately after the parent, before any siblings of the
parent. That way, when generic_make_request() calls make_request_fn
for some particular device, we can be certain that all previously
submited requests for that device have been completely handled and are
not waiting for anything in the queue of requests maintained in
generic_make_request().
An easy way to achieve this would be to use a last-in-first-out stack
instead of a queue. However this will change the order of consecutive
bios submitted by a make_request_fn, which could have unexpected consequences.
Instead we take a slightly more complex approach.
A fresh queue is created for each call to a make_request_fn. After it completes,
any bios for a different device are placed on the front of the main queue, followed
by any bios for the same device, followed by all bios that were already on
the queue before the make_request_fn was called.
This provides the depth-first approach without reordering bios on the same level.
This, by itself, it not enough to remove all deadlocks. It just makes
it possible for drivers to take the extra step required themselves.
To avoid deadlocks, drivers must never risk waiting for a request
after submitting one to generic_make_request. This includes never
allocing from a mempool twice in the one call to a make_request_fn.
A common pattern in drivers is to call bio_split() in a loop, handling
the first part and then looping around to possibly split the next part.
Instead, a driver that finds it needs to split a bio should queue
(with generic_make_request) the second part, handle the first part,
and then return. The new code in generic_make_request will ensure the
requests to underlying bios are processed first, then the second bio
that was split off. If it splits again, the same process happens. In
each case one bio will be completely handled before the next one is attempted.
With this is place, it should be possible to disable the
punt_bios_to_recover() recovery thread for many block devices, and
eventually it may be possible to remove it completely.
Ref: http://www.spinics.net/lists/raid/msg54680.html
Tested-by: Jinpu Wang <jinpu.wang@profitbricks.com>
Inspired-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
[jwang: backport to 4.4]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
This is the 4.4.58 stable release
|
