summaryrefslogtreecommitdiff
path: root/arch/ia64/pci
AgeCommit message (Collapse)Author
2018-03-13PCI/MSI: Don't set up INTx if MSI or MSI-X is enabledBjorn Helgaas
If MSI or MSI-X is enabled, the device uses that. It uses INTx only if both MSI and MSI-X are disabled (see PCIe r4.0, sec 7.7.1.2), so if a device already has MSI or MSI-X enabled, there's no need to set up its legacy INTx interrupt. bba6f6fc68e7 ("[PATCH] MSI-X: fix resume crash") changed the cris, frv, x86, and ia64 arches to skip INTx setup when MSI is enabled. The cris and frv arches have since been removed. 16cf0ebc35dd ("x86/PCI: Do not use interrupt links for devices using MSI-X") extended that by changing x86 to also skip INTx setup when MSI-X is enabled. Change ia64 to skip INTx setup when either MSI or MSI-X is enabled by applying the logic from 16cf0ebc35dd to ia64 as well as x86. Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-02PCI: Add a generic weak pcibios_align_resource()Palmer Dabbelt
Multiple architectures define this as a trivial function, and I'm adding another one as part of the RISC-V port. Add a __weak version of pcibios_align_resource() and delete the now-obselete ones in a handful of ports. The only functional change should be that a handful of ports used to export pcibios_fixup_bus(). Only some architectures export this, so I just dropped it. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-20ia64: Use generic pci_mmap_resource_range()David Woodhouse
Now that we eliminated the different behaviour in separately-reviewable commits, we can switch IA64 to the generic implementation. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Tested-by: Tony Luck <tony.luck@intel.com>
2017-04-20ia64: Remove redundant checks for WC in pci_mmap_page_range()David Woodhouse
For a PCI MMIO BAR, phys_mem_access_prot() should always return UC or WC. And while a mixture of cached and uncached mappings is forbidden, we were already mixing WC and UC, which is OK. Just do as we're asked. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Tested-by: Tony Luck <tony.luck@intel.com>
2017-04-20ia64: Remove redundant valid_mmap_phys_addr_range() from pci_mmap_page_range()David Woodhouse
We know we are within a valid MMIO BAR by the time this function gets called; there's no need to check. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Tested-by: Tony Luck <tony.luck@intel.com>
2017-04-20PCI: Add BAR index argument to pci_mmap_page_range()David Woodhouse
In all cases we know which BAR it is. Passing it in means that arch code (or generic code; watch this space) won't have to go looking for it again. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: Set ROM shadow location in arch code, not in PCI coreBjorn Helgaas
IORESOURCE_ROM_SHADOW means there is a copy of a device's option ROM in RAM. The existence of such a copy and its location are arch-specific. Previously the IORESOURCE_ROM_SHADOW flag was set in arch code, but the 0xC0000-0xDFFFF location was hard-coded into the PCI core. If we're using a shadow copy in RAM, disable the ROM BAR and release the address space it was consuming. Move the location information from the PCI core to the arch code that sets IORESOURCE_ROM_SHADOW. Save the location of the RAM copy in the struct resource for PCI_ROM_RESOURCE. After this change, pci_map_rom() will call pci_assign_resource() and pci_enable_rom() for these IORESOURCE_ROM_SHADOW resources, which we did not do before. This is safe because: - pci_assign_resource() will do nothing because the resource is marked IORESOURCE_PCI_FIXED, which means we can't move it, and - pci_enable_rom() will not turn on the ROM BAR's enable bit because the resource is marked IORESOURCE_ROM_SHADOW, which means it is in RAM rather than in PCI memory space. Storing the location in the struct resource means "lspci" will show the shadow location, not the value from the ROM BAR. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXEDBjorn Helgaas
A shadow copy of an option ROM is placed by the BIOS as a fixed address. Set IORESOURCE_PCI_FIXED to indicate that we can't move the shadow copy. This prevents warnings like the following when we assign resources: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment This warning is emitted by pdev_sort_resources(), which already ignores IORESOURCE_PCI_FIXED resources. Link: http://lkml.kernel.org/r/CA+55aFyVMfTBB0oz_yx8+eQOEJnzGtCsYSj9QuhEpdZ9BHdq5A@mail.gmail.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-16ia64/PCI/ACPI: Use common interface to support PCI host bridgeJiang Liu
Use common interface to simplify PCI host bridge implementation. Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-16ia64/PCI: Use common struct resource_entry to replace struct iospace_resourceJiang Liu
Use common struct resource_entry to replace private struct iospace_resource. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-16ia64/PCI/ACPI: Use common ACPI resource parsing interface for host bridgeJiang Liu
Use common ACPI resource parsing interface to parse ACPI resources for PCI host bridge, so we could share more code between IA64 and x86. Later we will consolidate arch specific implementations into ACPI core. Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-15PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"Bjorn Helgaas
Revert dff22d2054b5 ("PCI: Call pci_read_bridge_bases() from core instead of arch code"). Reading PCI bridge windows is not arch-specific in itself, but there is PCI core code that doesn't work correctly if we read them too early. For example, Hannes found this case on an ARM Freescale i.mx6 board: pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: BAR 8: no space for [mem size 0x01000000] (mem window) pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00200000] pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x00004000] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00000100] The 00:00.0 mem window needs to be at least 3MB: the 01:00.0 device needs 0x204100 of space, and mem windows are megabyte-aligned. Bus sizing can increase a bridge window size, but never *decrease* it (see d65245c3297a ("PCI: don't shrink bridge resources")). Prior to dff22d2054b5, ARM didn't read bridge windows at all, so the "original size" was zero, and we assigned a 3MB window. After dff22d2054b5, we read the bridge windows before sizing the bus. The firmware programmed a 16MB window (size 0x01000000) in 00:00.0, and since we never decrease the size, we kept 16MB even though we only needed 3MB. But 16MB doesn't fit in the host bridge aperture, so we failed to assign space for the window and the downstream devices. I think this is a defect in the PCI core: we shouldn't rely on the firmware to assign sensible windows. Ray reported a similar problem, also on ARM, with Broadcom iProc. Issues like this are too hard to fix right now, so revert dff22d2054b5. Reported-by: Hannes <oe5hpm@gmail.com> Reported-by: Ray Jui <rjui@broadcom.com> Link: http://lkml.kernel.org/r/CAAa04yFQEUJm7Jj1qMT57-LG7ZGtnhNDBe=PpSRa70Mj+XhW-A@mail.gmail.com Link: http://lkml.kernel.org/r/55F75BB8.4070405@broadcom.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-07-23PCI: Call pci_read_bridge_bases() from core instead of arch codeLorenzo Pieralisi
When we scan a PCI bus, we read PCI-PCI bridge window registers with pci_read_bridge_bases() so we can validate the resource hierarchy. Most architectures call pci_read_bridge_bases() from pcibios_fixup_bus(), but PCI-PCI bridges are not arch-specific, so this doesn't need to be in arch-specific code. Call pci_read_bridge_bases() directly from the PCI core instead of from arch code. For alpha and mips, we now call pci_read_bridge_bases() always; previously we only called it if PCI_PROBE_ONLY was set. [bhelgaas: changelog] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: James E.J. Bottomley <jejb@parisc-linux.org> CC: Michael Ellerman <mpe@ellerman.id.au> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Richard Henderson <rth@twiddle.net> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: David Howells <dhowells@redhat.com> CC: Russell King <linux@arm.linux.org.uk> CC: Tony Luck <tony.luck@intel.com> CC: David S. Miller <davem@davemloft.net> CC: Ingo Molnar <mingo@redhat.com> CC: Guenter Roeck <linux@roeck-us.net> CC: Michal Simek <monstr@monstr.eu> CC: Chris Zankel <chris@zankel.net>
2015-05-28PCI / ACPI: Do not set ACPI companions for host bridges with parentsRafael J. Wysocki
Commit 97badf873ab6 (device property: Make it possible to use secondary firmware nodes) uncovered a bug in the x86 (and ia64) PCI host bridge initialization code that assumes bridge->bus->sysdata to always point to a struct pci_sysdata object which need not be the case (in particular, the Xen PCI frontend driver sets it to point to a different data type). If it is not the case, an incorrect pointer (or a piece of data that is not a pointer at all) will be passed to ACPI_COMPANION_SET() and that may cause interesting breakage to happen going forward. To work around this problem use the observation that the ACPI host bridge initialization always passes NULL as parent to pci_create_root_bus(), so if pcibios_root_bridge_prepare() sees a non-NULL parent of the bridge, it should not attempt to set an ACPI companion for it, because that means that pci_create_root_bus() has been called by someone else. Fixes: 97badf873ab6 (device property: Make it possible to use secondary firmware nodes) Reported-and-tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-21ia64/PCI: Treat all host bridge Address Space Descriptors (even consumers) ↵Bjorn Helgaas
as windows Prior to c770cb4cb505 ("PCI: Mark invalid BARs as unassigned"), if we tried to claim a PCI BAR but could not find an upstream bridge window that matched it, we complained but still allowed the device to be enabled. c770cb4cb505 broke devices that previously worked (mptsas and igb in the case Tony reported, but it could be any devices) because it marks those BARs as IORESOURCE_UNSET, which makes pci_enable_device() complain and return failure: igb 0000:81:00.0: can't enable device: BAR 0 [mem size 0x00020000] not assigned igb: probe of 0000:81:00.0 failed with error -22 The underlying cause is an ACPI Address Space Descriptor for a PCI host bridge window that is marked as "consumer". This is a firmware defect: resources that are produced on the downstream side of a bridge should be marked "producer". But rejecting these BARs that we previously allowed is a functionality regression, and firmware has not used the producer/consumer bit consistently, so we can't rely on it anyway. Stop checking the producer/consumer bit, and assume all bridge Address Space Descriptors are for bridge windows. Note that this change does not affect I/O Port or Fixed Location I/O Port Descriptors, which are commonly used for the [io 0x0cf8-0x0cff] config access range. That range is a "consumer" range and should not be treated as a window. Fixes: c770cb4cb505 ("PCI: Mark invalid BARs as unassigned") Link: https://bugzilla.kernel.org/show_bug.cgi?id=96961 Reported-and-tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-10Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model ACPICA: Events: Introduce acpi_set_gpe()/acpi_finish_gpe() to reduce divergences ACPICA: Events: Introduce ACPI_GPE_DISPATCH_RAW_HANDLER to fix 2 issues for the current GPE APIs ACPICA: Update version to 20150204 ACPICA: Update Copyright headers to 2015 ACPICA: Hardware: Cast GPE enable_mask before storing ACPICA: Events: Cleanup GPE dispatcher type obtaining code ACPICA: Events: Cleanup to move acpi_gbl_global_event_handler invocation out of acpi_ev_gpe_dispatch() ACPICA: Events: Cleanup of resetting the GPE handler to NULL before removing ACPICA: Events: Fix uninitialized variable ACPICA: Events: Remove acpi_ev_valid_gpe_event() due to current restriction ACPICA: Events: Remove duplicated sanity check in acpi_ev_enable_gpe() ACPICA: Events: Back port "ACPICA: Save current masks of enabled GPEs after enable register writes" ACPICA: Resources: Provide common part for struct acpi_resource_address structures. ACPI: Introduce acpi_unload_parent_table() usages in Linux kernel ACPICA: take ACPI_MTX_INTERPRETER in acpi_unload_table_id()
2015-01-26ACPICA: Resources: Provide common part for struct acpi_resource_address ↵Lv Zheng
structures. struct acpi_resource_address and struct acpi_resource_extended_address64 share substracts just at different offsets. To unify the parsing functions, OSPMs like Linux need a new ACPI_ADDRESS64_ATTRIBUTE as their substructs, so they can extract the shared data. This patch also synchronizes the structure changes to the Linux kernel. The usages are searched by matching the following keywords: 1. acpi_resource_address 2. acpi_resource_extended_address 3. ACPI_RESOURCE_TYPE_ADDRESS 4. ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS And we found and fixed the usages in the following files: arch/ia64/kernel/acpi-ext.c arch/ia64/pci/pci.c arch/x86/pci/acpi.c arch/x86/pci/mmconfig-shared.c drivers/xen/xen-acpi-memhotplug.c drivers/acpi/acpi_memhotplug.c drivers/acpi/pci_root.c drivers/acpi/resource.c drivers/char/hpet.c drivers/pnp/pnpacpi/rsparser.c drivers/hv/vmbus_drv.c Build tests are passed with defconfig/allnoconfig/allyesconfig and defconfig+CONFIG_ACPI=n. Original-by: Thomas Gleixner <tglx@linutronix.de> Original-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-16ia64/PCI: Clip bridge windows to fit in upstream windowsYinghai Lu
Every PCI-PCI bridge window should fit inside an upstream bridge window because orphaned address space is unreachable from the primary side of the upstream bridge. If we inherit invalid bridge windows that overlap an upstream window from firmware, clip them to fit and update the bridge accordingly. [bhelgaas: changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491 Reported-by: Marek Kordik <kordikmarek@gmail.com> Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Tony Luck <tony.luck@intel.com> CC: Fenghua Yu <fenghua.yu@intel.com> CC: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> CC: linux-ia64@vger.kernel.org
2014-09-16vgaarb: Don't default exclusively to first video device with mem+ioBruno Prémont
Commit 20cde694027e ("x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()") moved boot video device detection from efifb to x86 and ia64 pci/fixup.c. For dual-GPU Apple computers above change represents a regression as code in efifb did forcefully override vga_default_device while the merge did not (vgaarb happens prior to PCI fixup). To improve on initial device selection by vgaarb (it cannot know if PCI device not behind bridges see/decode legacy VGA I/O or not), move the screen_info based check from pci_video_fixup() to vgaarb's init function and use it to refine/override decision taken while adding the individual PCI VGA devices. This way PCI fixup has no reason to adjust vga_default_device anymore but can depend on its value for flagging shadowed VBIOS. This has the nice benefit of removing duplicated code but does introduce a #if defined() block in vgaarb. Not all architectures have screen_info and would cause compile to fail without it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=84461 Reported-and-Tested-By: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Matthew Garrett <matthew.garrett@nebula.com> CC: stable@vger.kernel.org # v3.5+
2014-07-10x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()Bruno Prémont
Commit b4aa0163056b ("efifb: Implement vga_default_device() (v2)") added efifb vga_default_device() so EFI systems that do not load shadow VBIOS or setup VGA get proper value for boot_vga PCI sysfs attribute on the corresponding PCI device. Xorg doesn't detect devices when boot_vga=0, e.g., on some EFI systems such as MacBookAir2,1. Xorg detects the GPU and finds the DRI device but then bails out with "no devices detected". Note: When vga_default_device() is set boot_vga PCI sysfs attribute reflects its state. When unset this attribute is 1 whenever IORESOURCE_ROM_SHADOW flag is set. With introduction of sysfb/simplefb/simpledrm efifb is getting obsolete while having native drivers for the GPU also makes selecting sysfb/efifb optional. Remove the efifb implementation of vga_default_device() and initialize vgaarb's vga_default_device() with the PCI GPU that matches boot screen_info in pci_fixup_video(). [bhelgaas: remove unused "dev" in efifb_setup()] Fixes: b4aa0163056b ("efifb: Implement vga_default_device() (v2)") Tested-by: Anibal Francisco Martinez Cortina <linuxkid.zeuz@gmail.com> Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Matthew Garrett <matthew.garrett@nebula.com> CC: stable@vger.kernel.org # v3.5+
2014-05-27ia64/PCI: Use pci_is_bridge() to simplify codeYijing Wang
Use pci_is_bridge() to simplify code. No functional change. Requires: 326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate() Requires: 1c86438c9423 PCI: Add new pci_is_bridge() interface Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-18Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI: Enable INTx if BIOS left them disabled ia64/PCI: Set IORESOURCE_ROM_SHADOW only for the default VGA device x86/PCI: Set IORESOURCE_ROM_SHADOW only for the default VGA device PCI: Update outdated comment for pcibios_bus_report_status() PCI: Cleanup per-arch list of object files PCI: cpqphp: Fix hex vs decimal typo in cpqhpc_probe() x86/PCI: Fix function definition whitespace x86/PCI: Reword comments x86/PCI: Remove unnecessary local variable initialization PCI: Remove unnecessary list_empty(&pci_pme_list) check
2014-02-14ia64/PCI: Set IORESOURCE_ROM_SHADOW only for the default VGA deviceSander Eikelenboom
Setting the IORESOURCE_ROM_SHADOW flag on a VGA card other than the primary prevents it from reading its own ROM. It will get the content of the shadow ROM at C000 instead, which is of the primary VGA card and the driver of the secondary card will bail out. Fix this by checking if the arch code or vga-arbitration has already determined the vga_default_device, if so only apply the fix to this primary video device and let the comment reflect this. [bhelgaas: add subject, split x86 & ia64 into separate patches, include vgaarb.h] Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-03ia64: Remove acpi_get_pxm() usageBjorn Helgaas
The IOMMU, LSAPIC, IOSAPIC, and PCI host bridge code doesn't care about _PXM values directly; it only needs to know what NUMA node the hardware is on. This uses acpi_get_node() directly and removes the _PXM stuff. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-14ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_nodeRafael J. Wysocki
Modify struct acpi_dev_node to contain a pointer to struct acpi_device associated with the given device object (that is, its ACPI companion device) instead of an ACPI handle corresponding to it. Introduce two new macros for manipulating that pointer in a CONFIG_ACPI-safe way, ACPI_COMPANION() and ACPI_COMPANION_SET(), and rework the ACPI_HANDLE() macro to take the above changes into account. Drop the ACPI_HANDLE_SET() macro entirely and rework its users to use ACPI_COMPANION_SET() instead. For some of them who used to pass the result of acpi_get_child() directly to ACPI_HANDLE_SET() introduce a helper routine acpi_preset_companion() doing an equivalent thing. The main motivation for doing this is that there are things represented by struct acpi_device objects that don't have valid ACPI handles (so called fixed ACPI hardware features, such as power and sleep buttons) and we would like to create platform device objects for them and "glue" them to their ACPI companions in the usual way (which currently is impossible due to the lack of valid ACPI handles). However, there are more reasons why it may be useful. First, struct acpi_device pointers allow of much better type checking than void pointers which are ACPI handles, so it should be more difficult to write buggy code using modified struct acpi_dev_node and the new macros. Second, the change should help to reduce (over time) the number of places in which the result of ACPI_HANDLE() is passed to acpi_bus_get_device() in order to obtain a pointer to the struct acpi_device associated with the given "physical" device, because now that pointer is returned by ACPI_COMPANION() directly. Finally, the change should make it easier to write generic code that will build both for CONFIG_ACPI set and unset without adding explicit compiler directives to it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> # on Haswell Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> # for ATA and SDIO part
2013-06-18PCI: Replace printks with appropriate pr_*()Yijing Wang
Replace deprecated printk(KERN_ERR...) with pr_err() in arch/ia64/pci/pci.c Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-ia64@vger.kernel.org Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-06-18PCI/IA64: introduce probe_pci_root_info() to manage _CRS resourceYijing Wang
Currently, initialize _CRS resource code in IA64 make pci_acpi_scan_root() some lengthiness. Introduce probe_pci_root_info() to manage it like in X86, Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-ia64@vger.kernel.org Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-06-18PCI/IA64: Add host bridge resource release for _CRS pathYijing Wang
Set IA64 host bridge release function to make sure root bridge related resources get freed during root bus removal. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-ia64@vger.kernel.org Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-06-18PCI/IA64: fix memleak for create pci root bus failJiang Liu
If pci_create_root_bus() return fail, we should release pci root info, pci controller etc. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-ia64@vger.kernel.org Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-06-18PCI/IA64: Allocate pci_root_info instead of using stackYijing Wang
We need to pass around info for release function. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-ia64@vger.kernel.org Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-06-18PCI/IA64: embed pci hostbridge resources into pci_root_infoYijing Wang
Currently, pcibios_resource_to_bus() and pcibios_bus_to_resource() functions use pci_host_bridge to translate bus side address from/to cpu side address. The pci_window in pci_controller never be used again. So we remove pci_window in pci_controller and embed hostbridge resource into pci_root_info. Bjorn suggested to implement hostbridge resources release in IA64 like in X86, this patch is to prepare for that. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: linux-ia64@vger.kernel.org Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-04-12ia64/PCI: Implement pcibios_{add|remove}_bus() hooksJiang Liu
Implement pcibios_{add|remove}_bus() hooks for IA64 platforms. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com>
2013-02-25Merge tag 'pci-v3.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu) - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu) - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu) - Stop caching _PRT and make independent of bus numbers (Yinghai Lu) PCI device hotplug - Clean up cpqphp dead code (Sasha Levin) - Disable ARI unless device and upstream bridge support it (Yijing Wang) - Initialize all hot-added devices (not functions 0-7) (Yijing Wang) Power management - Don't touch ASPM if disabled (Joe Lawrence) - Fix ASPM link state management (Myron Stowe) Miscellaneous - Fix PCI_EXP_FLAGS accessor (Alex Williamson) - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov) - Document hotplug resource and MPS parameters (Yijing Wang) - Add accessor for PCIe capabilities (Myron Stowe) - Drop pciehp suspend/resume messages (Paul Bolle) - Make pci_slot built-in only (not a module) (Jiang Liu) - Remove unused PCI/ACPI bind ops (Jiang Liu) - Removed used pci_root_bus (Bjorn Helgaas)" * tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS ACPI / PCI: Make pci_slot built-in only, not a module PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown() PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus() PCI: pciehp: Drop suspend/resume ENTRY messages PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found ...
2013-01-13ACPI / PCI: Set root bridge ACPI handle in advanceRafael J. Wysocki
The ACPI handles of PCI root bridges need to be known to acpi_bind_one(), so that it can create the appropriate "firmware_node" and "physical_node" files for them, but currently the way it gets to know those handles is not exactly straightforward (to put it lightly). This is how it works, roughly: 1. acpi_bus_scan() finds the handle of a PCI root bridge, creates a struct acpi_device object for it and passes that object to acpi_pci_root_add(). 2. acpi_pci_root_add() creates a struct acpi_pci_root object, populates its "device" field with its argument's address (device->handle is the ACPI handle found in step 1). 3. The struct acpi_pci_root object created in step 2 is passed to pci_acpi_scan_root() and used to get resources that are passed to pci_create_root_bus(). 4. pci_create_root_bus() creates a struct pci_host_bridge object and passes its "dev" member to device_register(). 5. platform_notify(), which for systems with ACPI is set to acpi_platform_notify(), is called. So far, so good. Now it starts to be "interesting". 6. acpi_find_bridge_device() is used to find the ACPI handle of the given device (which is the PCI root bridge) and executes acpi_pci_find_root_bridge(), among other things, for the given device object. 7. acpi_pci_find_root_bridge() uses the name (sic!) of the given device object to extract the segment and bus numbers of the PCI root bridge and passes them to acpi_get_pci_rootbridge_handle(). 8. acpi_get_pci_rootbridge_handle() browses the list of ACPI PCI root bridges and finds the one that matches the given segment and bus numbers. Its handle is then used to initialize the ACPI handle of the PCI root bridge's device object by acpi_bind_one(). However, this is *exactly* the ACPI handle we started with in step 1. Needless to say, this is quite embarassing, but it may be avoided thanks to commit f3fd0c8 (ACPI: Allow ACPI handles of devices to be initialized in advance), which makes it possible to initialize the ACPI handle of a device before passing it to device_register(). Accordingly, add a new __weak routine, pcibios_root_bridge_prepare(), defaulting to an empty implementation that can be replaced by the interested architecutres (x86 and ia64 at the moment) with functions that will set the root bridge's ACPI handle before its dev member is passed to device_register(). Make both x86 and ia64 provide such implementations of pcibios_root_bridge_prepare() and remove acpi_pci_find_root_bridge() and acpi_get_pci_rootbridge_handle() that aren't necessary any more. Included is a fix for breakage on systems with non-ACPI PCI host bridges from Bjorn Helgaas. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-03IA64: drivers: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-24Merge branch 'pci/yinghai-misc' into nextBjorn Helgaas
2012-09-21ia64/PCI: Clear host bridge aperture struct resourceYinghai Lu
Use kzalloc() so the struct resource doesn't contain garbage in fields we don't initialize. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: linux-ia64@vger.kernel.org
2012-09-18PCI: Provide a default pcibios_update_irq()Thierry Reding
Most architectures implement this in exactly the same way. Instead of having each architecture duplicate this function, provide a single implementation in the core and make it a weak symbol so that it can be overridden on architectures where it is required. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-18PCI: Discard __init annotations for pci_fixup_irqs() and related functionsThierry Reding
Remove the __init annotations in order to keep pci_fixup_irqs() around after init (e.g. for hotplug). This requires the same change for the implementation of pcibios_update_irq() on all architectures. While at it, all __devinit annotations are removed as well, since they will be useless now that HOTPLUG is always on. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-30Merge tag 'please-pull-ia64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull misc ia64 build fixes from Tony Luck. * tag 'please-pull-ia64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts [IA64] Rename platform_name to ia64_platform_name [IA64] Mark PARAVIRT and KVM as broken
2012-07-25[IA64] Rename platform_name to ia64_platform_nameFengguang Wu
The macro name is too generic and conflicts with snd_soc_dai_link.platform_name, which triggers lots of build errors. Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-07-05Merge branch 'pci/myron-pcibios_setup' into nextBjorn Helgaas
* pci/myron-pcibios_setup: xtensa/PCI: factor out pcibios_setup() x86/PCI: adjust section annotations for pcibios_setup() unicore32/PCI: adjust section annotations for pcibios_setup() tile/PCI: factor out pcibios_setup() sparc/PCI: factor out pcibios_setup() sh/PCI: adjust section annotations for pcibios_setup() sh/PCI: factor out pcibios_setup() powerpc/PCI: factor out pcibios_setup() parisc/PCI: factor out pcibios_setup() MIPS/PCI: adjust section annotations for pcibios_setup() MIPS/PCI: factor out pcibios_setup() microblaze/PCI: factor out pcibios_setup() ia64/PCI: factor out pcibios_setup() cris/PCI: factor out pcibios_setup() alpha/PCI: factor out pcibios_setup() PCI: pull pcibios_setup() up into core
2012-07-05ia64/PCI: factor out pcibios_setup()Myron Stowe
The PCI core provides a generic pcibios_setup() routine. Drop this architecture-specific version in favor of that. Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13ia64/PCI: register busn_res for root busesYinghai Lu
Add the host bridge bus number aperture from _CRS to the resource list. Like the MMIO and I/O port apertures, this is used when assigning resources to hot-added devices or in the case of conflicts. [bhelgaas: changelog] CC: Tony Luck <tony.luck@intel.com> CC: Fenghua Yu <fenghua.yu@intel.com> CC: linux-ia64@vger.kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13PCI: replace struct pci_bus secondary/subordinate with busn_resYinghai Lu
Replace the struct pci_bus secondary/subordinate members with the struct resource busn_res. Later we'll build a resource tree of these bus numbers. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Disintegrate asm/system.h for IA64David Howells
Disintegrate asm/system.h for IA64. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Tony Luck <tony.luck@intel.com> cc: linux-ia64@vger.kernel.org
2012-02-23ia64/PCI: get rid of device resource fixupsBjorn Helgaas
Tell the PCI core about host bridge address translation so it can take care of bus-to-resource conversion for us. CC: Tony Luck <tony.luck@intel.com> CC: Jack Steiner <steiner@sgi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-01-06ia64/PCI: convert to pci_create_root_bus() for correct root bus resourcesBjorn Helgaas
Convert from pci_create_bus() to pci_create_root_bus(). This way the root bus resources are correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. We can't use pci_scan_root_bus() because, like x86, ACPI hotplug currently requires pci_bus_add_devices() in a separate host bridge .start() method. v2: fix compile error by using window resource pointer instead CC: Tony Luck <tony.luck@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>