| Age | Commit message (Collapse) | Author |
|---|
|
pm_rst, aclk_rst and pclk_rst should be controlled by driver, so we
need to add these three resets for PCIe controller.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
|
|
There are 2 Type-C phy on RK3399, they are almost same, except the
address of register. They support USB3.0 Type-C and DisplayPort1.3
Alt Mode on USB Type-C. Register a phy, supply it to USB3 controller
and DP controller.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The RK3399 GMAC Ethernet Controller provides a complete Ethernet interface
from processor to a Reduced Media Independent Interface (RMII) and Reduced
Gigabit Media Independent Interface (RGMII) compliant Ethernet PHY.
This patch adds the related needed device information.
e.g.: interrupts, grf, clocks, pinctrl and so on.
The full details are in [0].
[0]:
Documentation/devicetree/bindings/net/rockchip-dwmac.txt
Signed-off-by: Roger Chen <roger.chen@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This patch adds to enable the ARM Performance Monitor Units for rk3399.
ARM cores often have a PMU for counting cpu and cache events like cache
misses and hits.
This uses the new interrupt-partition mechanism to allow the two pmu
instances to use the per-cpu interrupt.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add the interrupts cells value for 4, and the 4th cell is zero.
Due to the doc[0] said:" the system requires describing PPI affinity,
then the value must be at least 4"
The 4th cell is a phandle to a node describing a set of CPUs this
interrupt is affine to. The interrupt must be a PPI, and the node
pointed must be a subnode of the "ppi-partitions" subnode. For
interrupt types other than PPI or PPIs that are not partitionned,
this cell must be zero. See the "ppi-partitions" node description
below.
[0]:
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The tcpc is the Type C Port Controller and Type C Port Delivery (tcpd)
is part of it, we haven't used them now, add it to save power consumption.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add a efuse0 node in the device tree for the ARM64 rk3399 SoC.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This patch introduces PCIe support found on RK3399 platform,
and specify phys phandle for it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This patch adds PCIe node for RK3399 to support
PCIe controller.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This patch adds the gmac ppower-domain to save power consumption
by letting the driver core handle the power-domain so we can
save power on boards not needing Ethernet.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
On some rk3399 boards GPIO0_A0 is hooked up to a 32 kHz clock. This can
be used as the source for various clocks in the system.
Add a pinmux so boards can get this pin properly configured.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Per testing, this can reduce the memory latency and d8 gets
better scores.
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Due to incorrect description in the TRM, the WDTs base address
should be fixed and swap them like this:
WDT0 - 0xff848000
WDT1 - 0xff840000
And, it is right that only WDT0 can generate global software reset.
We will update the TRM to fix it.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This patch adds saradc needed information on rk3399 SoCs.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add usb2-phy nodes and specify phys phandle for ehci.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
In order to meet low power requirements, a power management unit (PMU) is
designed for controlling power resources in RK3399. The RK3399 PMU is
dedicated for managing the power of the whole chip.
1. add pd node for RK3399 Soc
2. create power domain tree
3. add qos node for domain
From the DT/binds and driver can get more detail information:
The driver:
drivers/soc/rockchip/pm_domains.c
The document:
Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
Note:
As the TRM lists many voltage domains and power domains, then this patch
adds some domains for driver. Due to some domains
(e.g. emmc, usb, core)...We can't turned off it on
bootup, or says some device driver can't handle the power domain enough.
Maybe We will add more other domains in the future or later.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull 64-bit ARM DT updates from Olof Johansson:
"Just as the 32-bit contents, the 64-bit device tree branch also
contains a number of additions this release cycle.
New platforms:
- LG LG1313
- Mediatek MT6755
- Renesas r8a7796
- Broadcom 2837
Other platforms with larger updates are:
- Nvidia X1 platforms (USB 3.0, regulators, display subsystem)
- Mediatek MT8173 (display subsystem added)
- Rockchip RK3399 (a lot of new peripherals)
- ARM Juno reference implementation (SCPI power domains, coresight,
thermal)"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
arm64: tegra: Enable HDMI on Jetson TX1
arm64: tegra: Add sor1_src clock
arm64: tegra: Add XUSB powergates on Tegra210
arm64: tegra: Add DPAUX pinctrl bindings
arm64: tegra: Add ACONNECT bus node for Tegra210
arm64: tegra: Add audio powergate node for Tegra210
arm64: tegra: Add regulators for Tegra210 Smaug
arm64: tegra: Correct Tegra210 XUSB mailbox interrupt
arm64: tegra: Enable XUSB controller on Jetson TX1
arm64: tegra: Enable debug serial on Jetson TX1
arm64: tegra: Add Tegra210 XUSB controller
arm64: tegra: Add Tegra210 XUSB pad controller
arm64: tegra: Add DSI panel on Jetson TX1
arm64: tegra: p2597: Add SDMMC power supplies
arm64: tegra: Add PMIC support on Jetson TX1
Revert "ARM64: DTS: meson-gxbb: switch ethernet to real clock"
arm64: dts: hi6220: Add pl031 RTC support
arm64: dts: r8a7796/salvator-x: Enable watchdog timer
arm64: dts: r8a7796: Add RWDT node
arm64: dts: r8a7796: Use SYSC "always-on" PM Domain
...
|
|
http://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull the clockevents/clocksource tree from Daniel Lezcano:
- Convert the clocksource-probe init functions to return a value in order to
prepare the consolidation of the drivers using the DT. It is a big patchset
but went through 01.org (kbuild bot), linux next and kernel-ci (continuous
integration) (Daniel Lezcano)
- Fix a bad error handling by returning the right value for cadence_ttc
(Christophe Jaillet)
- Fix typo in the Kconfig for the Samsung pwm (Alexandre Belloni)
- Change functions to static for armada-370-xp and digicolor (Ben Dooks)
- Add support for the rk3399 SoC timer by adding bindings and a slight
change in the base address. Take the opportunity to add the DYNIRQ flag
(Huang Tao)
- Fix endian accessors for the Samsung pwm timer (Matthew Leach)
- Add Oxford Semiconductor RPS Dual Timer driver (Neil Armstrong)
- Add a kernel parameter to swich on/off the event stream feature of the arch
arm timer (Will Deacon)
|
|
Add a 'rktimer' node in the device treee for the ARM64 rk3399 SoC.
Signed-off-by: Huang Tao <huangtao@rock-chips.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Tested-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
There are two sleep related pins on rk3399: ap_pwroff and ddrio_pwroff.
Let's add the definition of these two pins to rk3399's main dtsi file so
that boards can use them.
These two pins are similar to the global_pwroff and ddrio_pwroff pins in
rk3288 and are expected to be used in the same way: boards will likely
want to configure these pinctrl settings in their global pinctrl hog
list.
Note that on rk3288 there were two additional pins in the "sleep"
section: "ddr0_retention" and "ddr1_retention". On rk3288 designs these
pins appeared to actually route from rk3288 back to rk3288. Presumably
on rk3399 this is simply not needed since the pins don't appear to exist
there.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Previous changes in this series allowed exposing the card clock from the
rk3399 SDHCI device and allowed consuming the card clock in the rk3399
eMMC PHY. Hook things up in the main rk3399 dtsi file.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
On rk3399 we'd like to be able to properly set corecfg registers in the
Arasan SDHCI component. Specify the syscon to enable that.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
We've got 9 (count em!) i2c controllers on rk3399, some of which are in
the PMU power domain and some of which are normal peripherals. Add them
all to the main rk3399 dtsi file so future patches can turn them on in
the board dts files.
Note: by default we try to set the i2c clock rate to 200 MHz so that we
can achieve good i2c functional clock rates. 200 MHz gives us the
ability to make very close to 100 kHz / 400 kHz / 1 MHz rates. If
boards want to tune clock rates further they can always override.
Possibly boards could want to tune this if:
- they wanted to save an infinitesimal amount of power and they knew
their i2c bus was slow anyway. Since we gate the functional clock
when the i2c bus is not active, power savings would only be while i2c
transfers were happening and probably won't be very big anyway.
- they wanted to eek out a bit more speed by carefully tuning the source
clock to make divisions work out perfectly, accounting for the rise /
fall time measured on an actual board.
Note also that we still request 200 MHz for the PMU i2c busses even
though we expect that we won't make that exactly (currently PPLL is 676
MHz which gives us 169 MHz).
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
[dianders: wrote desc; put in assigned-clocks; reordered nodes]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This adds thermal zone and tsadc nodes to rk3399 dtsi, rk3399 thermal
data is including the cpu and gpu sensor zone node.
The thermal zone node is the node containing all the required info
for describing a thermal zone, including its cooling device bindings.
The thermal zone node must contain, apart from its own properties, one
sub-node containing trip nodes and one sub-node containing all the zone
cooling maps.
The following is the parameter is introduced:
* polling-delay:
The maximum number of milliseconds to wait between polls
* polling-delay-passive:
The maximum number of milliseconds to wait between polls when performing
passive cooling.
* trips:
A sub-node which is a container of only trip point nodes required to
describe the thermal zone.
* cooling-maps:
A sub-node which is a container of only cooling device map nodes, used to
describe the relation between trips and cooling devices.
* cooling-device:
A phandle of a cooling device with its specifier, referring to which
cooling device is used in this cooling specifier binding. In the cooling
specifier, the first cell is the minimum cooling state and the second cell
is the maximum cooling state used in this map.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Tree-wide replacement was done by commit 2ef7d5f342c1 (ARM, ARM64:
dts: drop "arm,amba-bus" in favor of "simple-bus"), but we have some
new users of "arm,amba-bus" at Linux 4.7-rc1. Eliminate them now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add the core io-domain nodes to grf and pmugrf which individual
boards than just have to enable and add the necessary supplies to.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add description for the SDHCI v5.1 eMMC controller on rk3399. Fix it to
200 MHz, to support all supported timing modes.
Note that 'rockchip,rk3399-sdhci-5.1' is not documented; we presumably
have a compliant Arasan controller, but let's have a rockchip property
as the canonical backup/precautionary measure. Per Heiko's previous
suggestion, let's not clutter the arasan doc with it.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Per the examples in
Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt, we need the
grf node to be a simple-mfd in order to properly enumerate child devices
like our eMMC PHY.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
[directly mimic for the pmugrf, which will need the same change later
and there is no need to pollute commit history with another patch]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
These clocks are all core clocks used by many blocks/peripherals, many
of whose drivers don't set their clock rates at all. Let's assign
reasonable default clock rates for these core clocks, so that these
peripherals get something reasonable by default, and also so that if
child devices want to select a clock rate themselves, their muxes have
some reasonable parent clock rates to branch off of (rather than just
the boot-time defaults).
This helps the eMMC PHY, for one, to get a reasonable ACLK rate.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This patch adds core dtsi file for Rockchip RK3399 SoCs.
The RK3399 has big/little architecture, which needs a separate
node for the PMU of each microarchitecture, for now it missing
the pmu node since the old one could not work well.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
