summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/rockchip/px30-evb-ddr3-v10.dts
AgeCommit message (Collapse)Author
2019-01-29arm64: dts: rockchip: px30-evb-ddr3-v10: Separate android firmwarewu jingchen
Split DT source files to separate out android firmware for Android Pie & Oreo Change-Id: Ib16858996e236bb292bc380c0fddea2f5213c15b Signed-off-by: wu jingchen <oven.wu@rock-chips.com>
2018-12-29arm64: dts: rockchip: Update and clean up display nodes for px30/rk3326 boardsWyon Bi
Change-Id: I4f51bb63ec0f6027a1019f49f0ac1a197ecf7e9e Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
2018-12-29thermal: rockchip: add pinctrl controlElaine Zhang
Based on the TSADC Tshut mode to select pinctrl, instead of setting pinctrl based on architecture (Not depends on pinctrl setting by "init" or "default"). And it requires setting the tshut polarity before select pinctrl. Change-Id: Iac9ca05073b0181ee13b0048d0c2a54204f82bca Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
2018-09-10mfd: rk809: the sw1 interconvert with sw2shengfei Xu
The patch is in line with the latest SPEC. Change-Id: I874ba2bea37c72745c34ca926a06881f605746ac Signed-off-by: shengfei Xu <xsf@rock-chips.com>
2018-08-15arm64: dts: rockchip: rk3326/px30: Separate android firewareBian Jin chen
- Split DT source files to separate out android fireware specific DT bindings. - Add an alias for firmware_android && chosen in px30-android.dtsi. Change-Id: I63da786d8f70c72497b3def47309efcd8399c171 Signed-off-by: Bian Jin chen <kenjc.bian@rock-chips.com>
2018-07-03arm64: dts: rockchip: px30-evb-ddr3-v10: vcc_3v0 regulator-on-in-suspendWu Liangqing
According to the hardware design, wifi and rmii cannot be powered off in deepsleep Change-Id: Id44ef9b31c34b6f12695dbf3fbb843950602ca71 Signed-off-by: Wu Liangqing <wlq@rock-chips.com>
2018-06-28arm64: dts: rockchip: px30-evb: support miniboardWu Liangqing
Change-Id: I3c98857e875ddc40df28896f328b4bc8e0c9539f Signed-off-by: Wu Liangqing <wlq@rock-chips.com>
2018-06-21arm64: dts: rockchip: change the parameters of rk817 and rk809shengfei Xu
1. ldo default output voltage 1000mV; 2. charger termination adjustment select analog mode Change-Id: Iaae81c36db3df50738def462c25d34d8508632ae Signed-off-by: shengfei Xu <xsf@rock-chips.com>
2018-06-13arm64: dts: rockchip: add power control for gt1x on px30/rk3326 evbZhou weixin
Change-Id: I40bae62b0d11a7947d6da02aad9c44cf411bb28f Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
2018-05-31arm64: dts: rockchip: Enable bus_apll node for px30/rk3326Finley Xiao
Change-Id: I5b94d18f61daf92414ee5da666674576d6dc0c4d Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
2018-05-09arm64: dts: rockchip: Set pmic-reset-func to 1 for px30 and rk3326Tony Xie
config reset registers only for rk817 and rk809. Change-Id: I761fdc891b24812de43251538b1c2af8b7c92d68 Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
2018-05-08arm64: dts: rockchip: px30: set vccio regulator min microvolt to 1.8vWu Liangqing
Change-Id: If3dd897b1fa62a8e5bed30fadc7c755fdbd90103 Signed-off-by: Wu Liangqing <wlq@rock-chips.com>
2018-04-26arm64: dts: rockchip: Enable dmc for px30/rk3326Liang Chen
Change-Id: I47c08b9fcd12c21c3cc4731617ebfe4331a0ac72 Signed-off-by: Liang Chen <cl@rock-chips.com> Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
2018-04-19arm64: dts: rockchip: update pinctrl for px30Rocky Hao
1 move pinctrl into board level dts file. 2 remove pinctrl for sleep state. in sleep state we do not change pin control and keep the pin control in otp state, which is used by atf as a flag to control pmic's state. Change-Id: Ib68b20d4f4ba79d99255f1deb509ff8a741deef2 Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
2018-04-11arm64: dts: rockchip: px30: and dts of rkisp1 and ov5695Hu Kejun
Change-Id: I7dccf31cd6b781d53d25a5e53ea6642460cb14ac Signed-off-by: Hu Kejun <william.hu@rock-chips.com>
2018-04-03arm64: dts: rockchip: add pinctrl info for RK817&RK809Tony Xie
Change-Id: I23dc0c8271ba8cb566fa16bbd179fe6e8aa3b591 Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
2018-03-28arm64: dts: rockchip: fix dtc warnings of px30Tao Huang
Change-Id: Ie01bb2c17ec9ab4310278ace31ad25830847a74b Signed-off-by: Tao Huang <huangtao@rock-chips.com>
2018-03-21arm64: dts: rockchip: add always-on vccio_sd for uart debug on PX30/RK3326 ↵Zhou weixin
boards Change-Id: Ied5cc8f0cc3fb4a00aef3cd14846c2ead0e7a95e Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
2018-03-20arm64: dts: rockchip: remove always-on and boot-on from vcc{io}_sd of ↵Shawn Lin
PX30/RK3326 boards vccio_sd and vcc_sd are well better controlled by MMC core and please don't bother taking care of them instead, otherwise reboot w/ a working SD3.0 card will fail to respond the correct OCR in the first place as missing a proper power removal. Change-Id: I9efa11e25198b66e21538bd6603a3bab6638dc5f Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2018-03-12arm64: dts: rockchip: enable rockchip_suspend node for px30/rk3326 boardXiaoDong Huang
Change-Id: Ic0abae2f3c474e2d6f03bda3ae4a99d05cc53c30 Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
2018-03-08arm64: dts: rockchip: px30: Add 12ma strength for rmii mac_refclk pinDavid Wu
If the mac_refclk is provided from mac controller, the pin of mac_refclk needs to setup 12ma strength, or the signal is not good. If the mac_refclk is provided from phy, the pin of mac_refclk needs not to setup 12ma strength, the phy would do it. Change-Id: I4f6e6d081b4616363d10358c9e36d71cacbdb134 Signed-off-by: David Wu <david.wu@rock-chips.com>
2018-03-01arm64: dts: rockchip: set dcdc auto mode for rk817&rk809Tony Xie
Change-Id: I149bd790e20eb89899e091a767ef8293f83ecdd6 Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
2018-02-26arm64: dts: rockchip: Enable SD/SDIO 3.0 for PX30/RK3326 boardsShawn Lin
This patch enables SD(IO) 3.0 for all boards by adding correct vccq and vcc power supplies, as well as properities required by UHS-I mode. Change-Id: Iec11e1d1abe7ef9fc17ba08eece3440d7dcaea0b Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2018-02-25arm64: dts: rockchip: add cap-sd-highspeed for sdmmc for all px30/rk3326 boardsShawn Lin
Change-Id: I6db6411000d869439a8deb27ccec6bd4593bce26 Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2018-02-24arm64: dts: rockchip: Fix the RMII REF_CLK with input mode for px30-evbDavid Wu
Base on the evb board, the mode of RMII REF_CLK need to be setup for input. Change-Id: I06220d3422835a456b5567d7797a008d313e185a Signed-off-by: David Wu <david.wu@rock-chips.com>
2018-02-24arm64: dts: rockchip: Make adc key detected value more accurately for ↵David Wu
rk3326/px30 board Change-Id: Ibcc08001789478d714628fdec10024e6254daa74 Signed-off-by: David Wu <david.wu@rock-chips.com>
2018-02-24arm64: dts: rockchip: rk3326/px30: add pmic pwrkey nodeJoseph Chen
pwrkey node is necessary for U-Boot RK817/RK809 pwrkey driver, because the device-driver model requires it to make a match. Change-Id: Ica766232646ba93508592ab1a20b65157859d688 Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
2018-02-23arm64: dts: rockchip: add headset detect for px30Binyuan Lan
Change-Id: I640389607f7ef7be4e966b78afefcb9052b83214 Signed-off-by: Binyuan Lan <lby@rock-chips.com>
2018-02-23arm64: dts: rockchip: add rk809 codec for px30Binyuan Lan
Change-Id: Icdc8f3694fc2dc962b779173d1e25d6a0bf5a57e Signed-off-by: Binyuan Lan <lby@rock-chips.com>
2018-02-22arm64: dts: rockchip: px30: adjust suspend voltageXiaoDong Huang
1. adjust vdd_logic to 950000uV. 2. adjust vdd_arm to 950000uV. 3. set vdd_10 on. 4. set vcc3v0_pmu on. Change-Id: I1af72ccbc615f6bdcb59f51ac6ea54e8c3bfe2af Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
2018-02-22arm64: dts: rockchip: allow to disable vcc3v3_lcd on px30-evb boardWyon Bi
remove the 'regulator-always-on' property from vcc3v3_lcd Change-Id: I056601ed575b993065c17d245195bd376808bbed Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
2018-02-13arm64: dts: rockchip: px30: xin32k use the fixed clkFinley Xiao
If xin32k use the rk808_clkout1, rk808 init is too late, xin32k enable count and prepare count is not match with it's child clk. Change-Id: Iec5d1f91b2289b18f41b4d915e6859154a5b7635 Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
2018-02-11arm64: dts: rockchip: modify gsensor layout value of px30-evb-ddr3-v10 boardZorro Liu
Change-Id: I7ecdf9db002e3754189e345e27efbb249146539b Signed-off-by: Zorro Liu <lyx@rock-chips.com>
2018-02-08arm64: dts: rockchip: Fix some adc key issues for rk3326/px30 boardDavid Wu
1. add vref voltage 1.8v; 2. Alphabetical order; 3. Fix the press-threshold-microvolt; 4. Add poll interval 100ms Change-Id: If5e29f5073155be3022053cc3516dda88c5db223 Signed-off-by: David Wu <david.wu@rock-chips.com>
2018-02-07arm64: dts: rockchip: add gt1x config for px30/rk3326 evb boardZhou weixin
Change-Id: Ic13cf5d07ee6d5f42f02b801252a8aa0d26246b4 Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
2018-02-06arm64: dts: rockchip: add gpu regulator supply for px30/rk3326 boardLiang Chen
Change-Id: I6fe2c5168dd9637f53bfd2647f65d55fe008b339 Signed-off-by: Liang Chen <cl@rock-chips.com>
2018-02-06arm64: dts: rockchip: add cpu regulator supply for px30/rk3326 boardLiang Chen
Change-Id: I961d5fa4dee43eb78b79357dca95b10c9753cec0 Signed-off-by: Liang Chen <cl@rock-chips.com>
2018-02-06arm64: dts: rockchip: change the vdd_arm and vdd_logic node of px30/rk3326 boardTony Xie
change the vdd_arm and vdd_logic dts node for rk3326 and px30. delete the pinctrl define for rk818 and rk809. Change-Id: I4fcc10ac48b4b91f4225efc2efdb78227de005ba Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
2018-02-06arm64: dts: rockchip: enable i20 status and replace vccsys and vcc5v0_sys ↵Tony Xie
for px30/rk3326 board Change-Id: I8ad097dbd3f82d8b5b9d456a37a3be8ed14ae144 Signed-off-by: Tony Xie <xxx@rock-chips.com>
2018-02-05arm64: dts: rockchip: enable tsadc for px30/3326Zhou weixin
Change-Id: I93797773a49d2167c5d9d15d7ac7ab5a0f807240 Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
2018-02-05arm64: dts: rockchip: add io-domain config for px30/rk3326Zhou weixin
Change-Id: I8b0c76dfc388068782f613285f3b0c5e5314cd32 Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
2018-02-05arm64: dts: rockchip: add rk809 config for px30Tony Xie
Change-Id: I800930de092077f96873304b17aa218fa791813a Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
2018-02-02arm64: dts: rockchip: Auto match emmc and nand devices for px30/rk3326Zhou weixin
Change-Id: I787e0cefdf8bc7d0f5ae1483233017edafa7ee31 Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
2018-02-01arm64: dts: rockchip: enable vpu_combo for 3326/px30 boardZhou weixin
Change-Id: I1f4f8800945e9c329b5e5fe87acf032cf5fe163b Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
2018-01-30arm64: dts: rockchip: enable rk_rga for 3326/px30 boardZhou weixin
Change-Id: I5f98d63b2073c037a41d367639c19a962dbf79c4 Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
2018-01-30arm64: dts: rockchip: enable usb for 3326/px30 boardZhou weixin
Change-Id: Id2c4326c9385f4a06a81dbad73d84e207bf9c5c4 Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
2018-01-30arm64: dts: rockchip: correct sensor irq for px30-evb-ddr3-v10.dtsZhou weixin
Change-Id: I83f0936f8fd61b6ddf56261230f5d2ba2fda53c1 Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
2018-01-29arm64: dts: rockchip: px30-evb-ddr3-v10: enable GPU deviceZhen Chen
Change-Id: I58d0cf3d9312351599fb40e8ba170bc9e7bce4c4 Signed-off-by: Zhen Chen <chenzhen@rock-chips.com>
2018-01-26arm64: dts: rockchip: Using the open source ADC drivers for px30/rk3326 boardZhou weixin
Change-Id: I1d80dc9f25ed92c380811ec54e748ca89931063e Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
2018-01-26arm64: dts: rockchip: Enable gmac at px30*.dts levelDavid Wu
Change-Id: I3d6b4cfc8daa51f52f8fadddcad0cde8b098c53e Signed-off-by: David Wu <david.wu@rock-chips.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-04 14:57:25 +0000