summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-03Linux 4.4.115v4.4.115Greg Kroah-Hartman
2018-02-03spi: imx: do not access registers while clocks disabledStefan Agner
commit d593574aff0ab846136190b1729c151c736727ec upstream. Since clocks are disabled except during message transfer clocks are also disabled when spi_imx_remove gets called. Accessing registers leads to a freeeze at least on a i.MX 6ULL. Enable clocks before disabling accessing the MXC_CSPICTRL register. Fixes: 9e556dcc55774 ("spi: spi-imx: only enable the clocks when we start to transfer a message") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTSFabio Estevam
commit 38b1f0fb42f772b8c9aac53593883a18ff5eb9d7 upstream. The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS lines, so only allow such wakeup method when the system actually has RTS/CTS support. Fixes: bc85734b126f ("serial: imx: allow waking up on RTSD") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Martin Kaiser <martin@kaiser.cx> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03selinux: general protection fault in sock_has_permMark Salyzyn
In the absence of commit a4298e4522d6 ("net: add SOCK_RCU_FREE socket flag") and all the associated infrastructure changes to take advantage of a RCU grace period before freeing, there is a heightened possibility that a security check is performed while an ill-timed setsockopt call races in from user space. It then is prudent to null check sk_security, and if the case, reject the permissions. Because of the nature of this problem, hard to duplicate, no clear path, this patch is a simplified band-aid for stable trees lacking the infrastructure for the series of commits leading up to providing a suitable RCU grace period. This adjustment is orthogonal to infrastructure improvements that may nullify the needed check, but could be added as good code hygiene in all trees. general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 14233 Comm: syz-executor2 Not tainted 4.4.112-g5f6325b #28 task: ffff8801d1095f00 task.stack: ffff8800b5950000 RIP: 0010:[<ffffffff81b69b7e>] [<ffffffff81b69b7e>] sock_has_perm+0x1fe/0x3e0 security/selinux/hooks.c:4069 RSP: 0018:ffff8800b5957ce0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff10016b2af9f RCX: ffffffff81b69b51 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000010 RBP: ffff8800b5957de0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 1ffff10016b2af68 R12: ffff8800b5957db8 R13: 0000000000000000 R14: ffff8800b7259f40 R15: 00000000000000d7 FS: 00007f72f5ae2700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000a2fa38 CR3: 00000001d7980000 CR4: 0000000000160670 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffffffff81b69a1f ffff8800b5957d58 00008000b5957d30 0000000041b58ab3 ffffffff83fc82f2 ffffffff81b69980 0000000000000246 ffff8801d1096770 ffff8801d3165668 ffffffff8157844b ffff8801d1095f00 ffff880000000001 Call Trace: [<ffffffff81b6a19d>] selinux_socket_setsockopt+0x4d/0x80 security/selinux/hooks.c:4338 [<ffffffff81b4873d>] security_socket_setsockopt+0x7d/0xb0 security/security.c:1257 [<ffffffff82df1ac8>] SYSC_setsockopt net/socket.c:1757 [inline] [<ffffffff82df1ac8>] SyS_setsockopt+0xe8/0x250 net/socket.c:1746 [<ffffffff83776499>] entry_SYSCALL_64_fastpath+0x16/0x92 Code: c2 42 9b b6 81 be 01 00 00 00 48 c7 c7 a0 cb 2b 84 e8 f7 2f 6d ff 49 8d 7d 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 83 01 00 00 41 8b 75 10 31 RIP [<ffffffff81b69b7e>] sock_has_perm+0x1fe/0x3e0 security/selinux/hooks.c:4069 RSP <ffff8800b5957ce0> ---[ end trace 7b5aaf788fef6174 ]--- Signed-off-by: Mark Salyzyn <salyzyn@android.com> Acked-by: Paul Moore <paul@paul-moore.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: selinux@tycho.nsa.gov Cc: linux-security-module@vger.kernel.org Cc: Eric Paris <eparis@parisplace.org> Cc: Serge E. Hallyn <serge@hallyn.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03usb: uas: unconditionally bring back host after resetOliver Neukum
commit cbeef22fd611c4f47c494b821b2b105b8af970bb upstream. Quoting Hans: If we return 1 from our post_reset handler, then our disconnect handler will be called immediately afterwards. Since pre_reset blocks all scsi requests our disconnect handler will then hang in the scsi_remove_host call. This is esp. bad because our disconnect handler hanging for ever also stops the USB subsys from enumerating any new USB devices, causes commands like lsusb to hang, etc. In practice this happens when unplugging some uas devices because the hub code may see the device as needing a warm-reset and calls usb_reset_device before seeing the disconnect. In this case uas_configure_endpoints fails with -ENODEV. We do not want to print an error for this, so this commit also silences the shost_printk for -ENODEV. ENDQUOTE However, if we do that we better drop any unconditional execution and report to the SCSI subsystem that we have undergone a reset but we are not operational now. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03usb: f_fs: Prevent gadget unbind if it is already unboundHemant Kumar
commit ce5bf9a50daf2d9078b505aca1cea22e88ecb94a upstream. Upon usb composition switch there is possibility of ep0 file release happening after gadget driver bind. In case of composition switch from adb to a non-adb composition gadget will never gets bound again resulting into failure of usb device enumeration. Fix this issue by checking FFS_FL_BOUND flag and avoid extra gadget driver unbind if it is already done as part of composition switch. This fixes adb reconnection error reported on Android running v4.4 and above kernel versions. Verified on Hikey running vanilla v4.15-rc7 + few out of tree Mali patches. Reviewed-at: https://android-review.googlesource.com/#/c/582632/ Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg KH <gregkh@linux-foundation.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: Badhri <badhri@google.com> Cc: Android Kernel Team <kernel-team@android.com> Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> [AmitP: Cherry-picked it from android-4.14 and updated the commit log] Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03USB: serial: simple: add Motorola Tetra driverJohan Hovold
commit 46fe895e22ab3845515ec06b01eaf1282b342e29 upstream. Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI devices. D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9011 Rev=24.16 S: Manufacturer=Motorola Solutions Inc. S: Product=Motorola Solutions TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Note that these devices do not support the CDC SET_CONTROL_LINE_STATE request (for any interface). Reported-by: Max Schulze <max.schulze@posteo.de> Tested-by: Max Schulze <max.schulze@posteo.de> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03usbip: list: don't list devices attached to vhci_hcdShuah Khan
commit ef824501f50846589f02173d73ce3fe6021a9d2a upstream. usbip host lists devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Fix it to check and not list devices that are attached to vhci_hcd. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03usbip: prevent bind loops on devices attached to vhci_hcdShuah Khan
commit ef54cf0c600fb8f5737fb001a9e357edda1a1de8 upstream. usbip host binds to devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Unbind followed by bind works, however device is left in a bad state with accesses via the attached busid result in errors and system hangs during shutdown. Fix it to check and bail out if the device is already attached to vhci_hcd. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03USB: serial: io_edgeport: fix possible sleep-in-atomicJia-Ju Bai
commit c7b8f77872c73f69a16528a9eb87afefcccdc18b upstream. According to drivers/usb/serial/io_edgeport.c, the driver may sleep under a spinlock. The function call path is: edge_bulk_in_callback (acquire the spinlock) process_rcvd_data process_rcvd_status change_port_settings send_iosp_ext_cmd write_cmd_usb usb_kill_urb --> may sleep To fix it, the redundant usb_kill_urb() is removed from the error path after usb_submit_urb() fails. This possible bug is found by my static analysis tool (DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03CDC-ACM: apply quirk for card readerOliver Neukum
commit df1cc78a52491f71d8170d513d0f6f114faa1bda upstream. This devices drops random bytes from messages if you talk to it too fast. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03USB: cdc-acm: Do not log urb submission errors on disconnectHans de Goede
commit f0386c083c2ce85284dc0b419d7b89c8e567c09f upstream. When disconnected sometimes the cdc-acm driver logs errors like these: [20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19 [20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19 [20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19 [20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19 [20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19 [20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19 [20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19 Silence these by not logging errors when the result is -ENODEV. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03USB: serial: pl2303: new device id for ChilitagGreg Kroah-Hartman
commit d08dd3f3dd2ae351b793fc5b76abdbf0fd317b12 upstream. This adds a new device id for Chilitag devices to the pl2303 driver. Reported-by: "Chu.Mike [朱堅宜]" <Mike-Chu@prolific.com.tw> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03usb: option: Add support for FS040U modemOKAMOTO Yoshiaki
commit 69341bd15018da0a662847e210f9b2380c71e623 upstream. FS040U modem is manufactured by omega, and sold by Fujisoft. This patch adds ID of the modem to use option1 driver. Interface 3 is used as qmi_wwan, so the interface is ignored. Signed-off-by: Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp> Signed-off-by: Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03staging: rtl8188eu: Fix incorrect response to SIOCGIWESSIDLarry Finger
[ Upstream commit b77992d2df9e47144354d1b25328b180afa33442 ] When not associated with an AP, wifi device drivers should respond to the SIOCGIWESSID ioctl with a zero-length string for the SSID, which is the behavior expected by dhcpcd. Currently, this driver returns an error code (-1) from the ioctl call, which causes dhcpcd to assume that the device is not a wireless interface and therefore it fails to work correctly with it thereafter. This problem was reported and tested at https://github.com/lwfinger/rtl8188eu/issues/234. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03usb: gadget: don't dereference g until after it has been null checkedColin Ian King
[ Upstream commit b2fc059fa549fe6881d4c1f8d698b0f50bcd16ec ] Avoid dereferencing pointer g until after g has been sanity null checked; move the assignment of cdev much later when it is required into a more local scope. Detected by CoverityScan, CID#1222135 ("Dereference before null check") Fixes: b785ea7ce662 ("usb: gadget: composite: fix ep->maxburst initialization") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03media: usbtv: add a new usbidIcenowy Zheng
[ Upstream commit 04226916d2360f56d57ad00bc48d2d1854d1e0b0 ] A new usbid of UTV007 is found in a newly bought device. The usbid is 1f71:3301. The ID on the chip is: UTV007 A89029.1 1520L18K1 Both video and audio is tested with the modified usbtv driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03scsi: ufs: ufshcd: fix potential NULL pointer dereference in ufshcd_config_vregGustavo A. R. Silva
[ Upstream commit 727535903bea924c4f73abb202c4b3e85fff0ca4 ] _vreg_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _vreg_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: aa4976130934 ("ufs: Add regulator enable support") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03scsi: aacraid: Prevent crash in case of free interrupt during scsi EH pathGuilherme G. Piccoli
[ Upstream commit e4717292ddebcfe231651b5aff9fa19ca158d178 ] As part of the scsi EH path, aacraid performs a reinitialization of the adapter, which encompass freeing resources and IRQs, NULLifying lots of pointers, and then initialize it all over again. We've identified a problem during the free IRQ portion of this path if CONFIG_DEBUG_SHIRQ is enabled on kernel config file. Happens that, in case this flag was set, right after free_irq() effectively clears the interrupt, it checks if it was requested as IRQF_SHARED. In positive case, it performs another call to the IRQ handler on driver. Problem is: since aacraid currently free some resources *before* freeing the IRQ, once free_irq() path calls the handler again (due to CONFIG_DEBUG_SHIRQ), aacraid crashes due to NULL pointer dereference with the following trace: aac_src_intr_message+0xf8/0x740 [aacraid] __free_irq+0x33c/0x4a0 free_irq+0x78/0xb0 aac_free_irq+0x13c/0x150 [aacraid] aac_reset_adapter+0x2e8/0x970 [aacraid] aac_eh_reset+0x3a8/0x5d0 [aacraid] scsi_try_host_reset+0x74/0x180 scsi_eh_ready_devs+0xc70/0x1510 scsi_error_handler+0x624/0xa20 This patch prevents the crash by changing the order of the deinitialization in this path of aacraid: first we clear the IRQ, then we free other resources. No functional change intended. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03xfs: ubsan fixesDarrick J. Wong
[ Upstream commit 22a6c83777ac7c17d6c63891beeeac24cf5da450 ] Fix some complaints from the UBSAN about signed integer addition overflows. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03drm/omap: Fix error handling path in 'omap_dmm_probe()'Christophe JAILLET
[ Upstream commit 8677b1ac2db021ab30bb1fa34f1e56ebe0051ec3 ] If we don't find a matching device node, we must free the memory allocated in 'omap_dmm' a few lines above. Fixes: 7cb0d6c17b96 ("drm/omap: fix TILER on OMAP5") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03kmemleak: add scheduling point to kmemleak_scan()Yisheng Xie
[ Upstream commit bde5f6bc68db51128f875a756e9082a6c6ff7b4c ] kmemleak_scan() will scan struct page for each node and it can be really large and resulting in a soft lockup. We have seen a soft lockup when do scan while compile kernel: watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287] [...] Call Trace: kmemleak_scan+0x21a/0x4c0 kmemleak_write+0x312/0x350 full_proxy_write+0x5a/0xa0 __vfs_write+0x33/0x150 vfs_write+0xad/0x1a0 SyS_write+0x52/0xc0 do_syscall_64+0x61/0x1a0 entry_SYSCALL64_slow_path+0x25/0x25 Fix this by adding cond_resched every MAX_SCAN_SIZE. Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huawei.com Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03SUNRPC: Allow connect to return EHOSTUNREACHTrond Myklebust
[ Upstream commit 4ba161a793d5f43757c35feff258d9f20a082940 ] Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03quota: Check for register_shrinker() failure.Tetsuo Handa
[ Upstream commit 88bc0ede8d35edc969350852894dc864a2dc1859 ] register_shrinker() might return -ENOMEM error since Linux 3.12. Call panic() as with other failure checks in this function if register_shrinker() failed. Fixes: 1d3d4437eae1 ("vmscan: per-node deferred work") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Jan Kara <jack@suse.com> Cc: Michal Hocko <mhocko@suse.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bitGeert Uytterhoeven
[ Upstream commit 15bfe05c8d6386f1a90e9340d15336e85e32aad6 ] On 64-bit (e.g. powerpc64/allmodconfig): drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done': drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] dev_kfree_skb_irq((struct sk_buff *)cur_p->app4); ^ cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer. Note that several other fields in struct cdmac_bd are also too small to hold physical addresses on 64-bit platforms. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03hwmon: (pmbus) Use 64bit math for DIRECT format valuesRobert Lippert
[ Upstream commit bd467e4eababe4c04272c1e646f066db02734c79 ] Power values in the 100s of watt range can easily blow past 32bit math limits when processing everything in microwatts. Use 64bit math instead to avoid these issues on common 32bit ARM BMC platforms. Fixes: 442aba78728e ("hwmon: PMBus device driver") Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03lockd: fix "list_add double add" caused by legacy signal interfaceVasily Averin
[ Upstream commit 81833de1a46edce9ca20cfe079872ac1c20ef359 ] restart_grace() uses hardcoded init_net. It can cause to "list_add double add" in following scenario: 1) nfsd and lockd was started in several net namespaces 2) nfsd in init_net was stopped (lockd was not stopped because it have users from another net namespaces) 3) lockd got signal, called restart_grace() -> set_grace_period() and enabled lock_manager in hardcoded init_net. 4) nfsd in init_net is started again, its lockd_up() calls set_grace_period() and tries to add lock_manager into init_net 2nd time. Jeff Layton suggest: "Make it safe to call locks_start_grace multiple times on the same lock_manager. If it's already on the global grace_list, then don't try to add it again. (But we don't intentionally add twice, so for now we WARN about that case.) With this change, we also need to ensure that the nfsd4 lock manager initializes the list before we call locks_start_grace. While we're at it, move the rest of the nfsd_net initialization into nfs4_state_create_net. I see no reason to have it spread over two functions like it is today." Suggested patch was updated to generate warning in described situation. Suggested-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03nfsd: check for use of the closed special stateidAndrew Elble
[ Upstream commit ae254dac721d44c0bfebe2795df87459e2e88219 ] Prevent the use of the closed (invalid) special stateid by clients. Signed-off-by: Andrew Elble <aweits@rit.edu> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03grace: replace BUG_ON by WARN_ONCE in exit_net hookVasily Averin
[ Upstream commit b872285751c1af010e12d02bce7069e2061a58ca ] Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03nfsd: Ensure we check stateid validity in the seqid operation checksTrond Myklebust
[ Upstream commit 9271d7e509c1bfc0b9a418caec29ec8d1ac38270 ] After taking the stateid st_mutex, we want to know that the stateid still represents valid state before performing any non-idempotent actions. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03nfsd: CLOSE SHOULD return the invalid special stateid for NFSv4.x (x>0)Trond Myklebust
[ Upstream commit fb500a7cfee7f2f447d2bbf30cb59629feab6ac1 ] Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03xen-netfront: remove warning when unloading moduleEduardo Otubo
[ Upstream commit 5b5971df3bc2775107ddad164018a8a8db633b81 ] v2: * Replace busy wait with wait_event()/wake_up_all() * Cannot garantee that at the time xennet_remove is called, the xen_netback state will not be XenbusStateClosed, so added a condition for that * There's a small chance for the xen_netback state is XenbusStateUnknown by the time the xen_netfront switches to Closed, so added a condition for that. When unloading module xen_netfront from guest, dmesg would output warning messages like below: [ 105.236836] xen:grant_table: WARNING: g.e. 0x903 still in use! [ 105.236839] deferring g.e. 0x903 (pfn 0x35805) This problem relies on netfront and netback being out of sync. By the time netfront revokes the g.e.'s netback didn't have enough time to free all of them, hence displaying the warnings on dmesg. The trick here is to make netfront to wait until netback frees all the g.e.'s and only then continue to cleanup for the module removal, and this is done by manipulating both device states. Signed-off-by: Eduardo Otubo <otubo@redhat.com> Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: VMX: Fix rflags cache during vCPU resetWanpeng Li
[ Upstream commit c37c28730bb031cc8a44a130c2555c0f3efbe2d0 ] Reported by syzkaller: *** Guest State *** CR0: actual=0x0000000080010031, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 CR4: actual=0x0000000000002061, shadow=0x0000000000000000, gh_mask=ffffffffffffe8f1 CR3 = 0x000000002081e000 RSP = 0x000000000000fffa RIP = 0x0000000000000000 RFLAGS=0x00023000 DR7 = 0x00000000000000 ^^^^^^^^^^ ------------[ cut here ]------------ WARNING: CPU: 6 PID: 24431 at /home/kernel/linux/arch/x86/kvm//x86.c:7302 kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm] CPU: 6 PID: 24431 Comm: reprotest Tainted: G W OE 4.14.0+ #26 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm] RSP: 0018:ffff880291d179e0 EFLAGS: 00010202 Call Trace: kvm_vcpu_ioctl+0x479/0x880 [kvm] do_vfs_ioctl+0x142/0x9a0 SyS_ioctl+0x74/0x80 entry_SYSCALL_64_fastpath+0x23/0x9a The failed vmentry is triggered by the following beautified testcase: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { struct kvm_debugregs dr = { 0 }; r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); struct kvm_guest_debug debug = { .control = 0xf0403, .arch = { .debugreg[6] = 0x2, .debugreg[7] = 0x2 } }; ioctl(r[4], KVM_SET_GUEST_DEBUG, &debug); ioctl(r[4], KVM_RUN, 0); } which testcase tries to setup the processor specific debug registers and configure vCPU for handling guest debug events through KVM_SET_GUEST_DEBUG. The KVM_SET_GUEST_DEBUG ioctl will get and set rflags in order to set TF bit if single step is needed. All regs' caches are reset to avail and GUEST_RFLAGS vmcs field is reset to 0x2 during vCPU reset. However, the cache of rflags is not reset during vCPU reset. The function vmx_get_rflags() returns an unreset rflags cache value since the cache is marked avail, it is 0 after boot. Vmentry fails if the rflags reserved bit 1 is 0. This patch fixes it by resetting both the GUEST_RFLAGS vmcs field and its cache to 0x2 during vCPU reset. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03btrfs: fix deadlock when writing out space cacheJosef Bacik
[ Upstream commit b77000ed558daa3bef0899d29bf171b8c9b5e6a8 ] If we fail to prepare our pages for whatever reason (out of memory in our case) we need to make sure to drop the block_group->data_rwsem, otherwise hilarity ensues. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add label and use existing unlocking code ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03mac80211: fix the update of path metric for RANN frameChun-Yeow Yeoh
[ Upstream commit fbbdad5edf0bb59786a51b94a9d006bc8c2da9a2 ] The previous path metric update from RANN frame has not considered the own link metric toward the transmitting mesh STA. Fix this. Reported-by: Michael65535 Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03openvswitch: fix the incorrect flow action alloc sizezhangliping
[ Upstream commit 67c8d22a73128ff910e2287567132530abcf5b71 ] If we want to add a datapath flow, which has more than 500 vxlan outputs' action, we will get the following error reports: openvswitch: netlink: Flow action size 32832 bytes exceeds max openvswitch: netlink: Flow action size 32832 bytes exceeds max openvswitch: netlink: Actions may not be safe on all matching packets ... ... It seems that we can simply enlarge the MAX_ACTIONS_BUFSIZE to fix it, but this is not the root cause. For example, for a vxlan output action, we need about 60 bytes for the nlattr, but after it is converted to the flow action, it only occupies 24 bytes. This means that we can still support more than 1000 vxlan output actions for a single datapath flow under the the current 32k max limitation. So even if the nla_len(attr) is larger than MAX_ACTIONS_BUFSIZE, we shouldn't report EINVAL and keep it move on, as the judgement can be done by the reserve_sfa_size. Signed-off-by: zhangliping <zhangliping02@baidu.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03drm/amdkfd: Fix SDMA oversubsription handlingFelix Kuehling
[ Upstream commit 8c946b8988acec785bcf67088b6bd0747f36d2d3 ] SDMA only supports a fixed number of queues. HWS cannot handle oversubscription. Signed-off-by: shaoyun liu <shaoyun.liu@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03drm/amdkfd: Fix SDMA ring buffer size calculationshaoyunl
[ Upstream commit d12fb13f23199faa7e536acec1db49068e5a067d ] ffs function return the position of the first bit set on 1 based. (bit zero returns 1). Signed-off-by: shaoyun liu <shaoyun.liu@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03drm/amdgpu: Fix SDMA load/unload sequence on HWS disabled modeFelix Kuehling
[ Upstream commit cf21654b40968609779751b34e7923180968fe5b ] Fix the SDMA load and unload sequence as suggested by HW document. Signed-off-by: shaoyun liu <shaoyun.liu@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03bcache: check return value of register_shrinkerMichael Lyle
[ Upstream commit 6c4ca1e36cdc1a0a7a84797804b87920ccbebf51 ] register_shrinker is now __must_check, so check it to kill a warning. Caller of bch_btree_cache_alloc in super.c appropriately checks return value so this is fully plumbed through. This V2 fixes checkpatch warnings and improves the commit description, as I was too hasty getting the previous version out. Signed-off-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Vojtech Pavlik <vojtech@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03cpufreq: Add Loongson machine dependenciesJames Hogan
[ Upstream commit 0d307935fefa6389eb726c6362351c162c949101 ] The MIPS loongson cpufreq drivers don't build unless configured for the correct machine type, due to dependency on machine specific architecture headers and symbols in machine specific platform code. More specifically loongson1-cpufreq.c uses RST_CPU_EN and RST_CPU, neither of which is defined in asm/mach-loongson32/regs-clk.h unless CONFIG_LOONGSON1_LS1B=y, and loongson2_cpufreq.c references loongson2_clockmod_table[], which is only defined in arch/mips/loongson64/lemote-2f/clock.c, i.e. when CONFIG_LEMOTE_MACH2F=y. Add these dependencies to Kconfig to avoid randconfig / allyesconfig build failures (e.g. when based on BMIPS which also has a cpufreq driver). Signed-off-by: James Hogan <jhogan@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03ACPI / bus: Leave modalias empty for devices which are not presentHans de Goede
[ Upstream commit 10809bb976648ac58194a629e3d7af99e7400297 ] Most Bay and Cherry Trail devices use a generic DSDT with all possible peripheral devices present in the DSDT, with their _STA returning 0x00 or 0x0f based on AML variables which describe what is actually present on the board. Since ACPI device objects with a 0x00 status (not present) still get an entry under /sys/bus/acpi/devices, and those entry had an acpi:PNPID modalias, userspace would end up loading modules for non present hardware. This commit fixes this by leaving the modalias empty for non present devices. This results in 10 modules less being loaded with a generic distro kernel config on my Cherry Trail test-device (a GPD pocket). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: x86: ioapic: Preserve read-only values in the redirection tableNikita Leshenko
[ Upstream commit b200dded0a6974a3b69599832b2203483920ab25 ] According to 82093AA (IOAPIC) manual, Remote IRR and Delivery Status are read-only. QEMU implements the bits as RO in commit 479c2a1cb7fb ("ioapic: keep RO bits for IOAPIC entry"). Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggeredNikita Leshenko
[ Upstream commit a8bfec2930525808c01f038825d1df3904638631 ] Some OSes (Linux, Xen) use this behavior to clear the Remote IRR bit for IOAPICs without an EOI register. They simulate the EOI message manually by changing the trigger mode to edge and then back to level, with the entry being masked during this. QEMU implements this feature in commit ed1263c363c9 ("ioapic: clear remote irr bit for edge-triggered interrupts") As a side effect, this commit removes an incorrect behavior where Remote IRR was cleared when the redirection table entry was rewritten. This is not consistent with the manual and also opens an opportunity for a strange behavior when a redirection table entry is modified from an interrupt handler that handles the same entry: The modification will clear the Remote IRR bit even though the interrupt handler is still running. Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure raceNikita Leshenko
[ Upstream commit 0fc5a36dd6b345eb0d251a65c236e53bead3eef7 ] KVM uses ioapic_handled_vectors to track vectors that need to notify the IOAPIC on EOI. The problem is that IOAPIC can be reconfigured while an interrupt with old configuration is pending or running and ioapic_handled_vectors only remembers the newest configuration; thus EOI from the old interrupt is not delievered to the IOAPIC. A previous commit db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race") addressed this issue by adding pending edge-triggered interrupts to ioapic_handled_vectors, fixing this race for edge-triggered interrupts. The commit explicitly ignored level-triggered interrupts, but this race applies to them as well: 1) IOAPIC sends a level triggered interrupt vector to VCPU0 2) VCPU0's handler deasserts the irq line and reconfigures the IOAPIC to route the vector to VCPU1. The reconfiguration rewrites only the upper 32 bits of the IOREDTBLn register. (Causes KVM to update ioapic_handled_vectors for VCPU0 and it no longer includes the vector.) 3) VCPU0 sends EOI for the vector, but it's not delievered to the IOAPIC because the ioapic_handled_vectors doesn't include the vector. 4) New interrupts are not delievered to VCPU1 because remote_irr bit is set forever. Therefore, the correct behavior is to add all pending and running interrupts to ioapic_handled_vectors. This commit introduces a slight performance hit similar to commit db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race") for the rare case that the vector is reused by a non-IOAPIC source on VCPU0. We prefer to keep solution simple and not handle this case just as the original commit does. Fixes: db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race") Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: X86: Fix operand/address-size during instruction decodingWanpeng Li
[ Upstream commit 3853be2603191829b442b64dac6ae8ba0c027bf9 ] Pedro reported: During tests that we conducted on KVM, we noticed that executing a "PUSH %ES" instruction under KVM produces different results on both memory and the SP register depending on whether EPT support is enabled. With EPT the SP is reduced by 4 bytes (and the written value is 0-padded) but without EPT support it is only reduced by 2 bytes. The difference can be observed when the CS.DB field is 1 (32-bit) but not when it's 0 (16-bit). The internal segment descriptor cache exist even in real/vm8096 mode. The CS.D also should be respected instead of just default operand/address-size/66H prefix/67H prefix during instruction decoding. This patch fixes it by also adjusting operand/address-size according to CS.D. Reported-by: Pedro Fonseca <pfonseca@cs.washington.edu> Tested-by: Pedro Fonseca <pfonseca@cs.washington.edu> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Pedro Fonseca <pfonseca@cs.washington.edu> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: x86: Don't re-execute instruction when not passing CR2 valueLiran Alon
[ Upstream commit 9b8ae63798cb97e785a667ff27e43fa6220cb734 ] In case of instruction-decode failure or emulation failure, x86_emulate_instruction() will call reexecute_instruction() which will attempt to use the cr2 value passed to x86_emulate_instruction(). However, when x86_emulate_instruction() is called from emulate_instruction(), cr2 is not passed (passed as 0) and therefore it doesn't make sense to execute reexecute_instruction() logic at all. Fixes: 51d8b66199e9 ("KVM: cleanup emulate_instruction") Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03KVM: x86: emulator: Return to user-mode on L1 CPL=0 emulation failureLiran Alon
[ Upstream commit 1f4dcb3b213235e642088709a1c54964d23365e9 ] On this case, handle_emulation_failure() fills kvm_run with internal-error information which it expects to be delivered to user-mode for further processing. However, the code reports a wrong return-value which makes KVM to never return to user-mode on this scenario. Fixes: 6d77dbfc88e3 ("KVM: inject #UD if instruction emulation fails and exit to userspace") Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03igb: Free IRQs when device is hotpluggedLyude Paul
commit 888f22931478a05bc81ceb7295c626e1292bf0ed upstream. Recently I got a Caldigit TS3 Thunderbolt 3 dock, and noticed that upon hotplugging my kernel would immediately crash due to igb: [ 680.825801] kernel BUG at drivers/pci/msi.c:352! [ 680.828388] invalid opcode: 0000 [#1] SMP [ 680.829194] Modules linked in: igb(O) thunderbolt i2c_algo_bit joydev vfat fat btusb btrtl btbcm btintel bluetooth ecdh_generic hp_wmi sparse_keymap rfkill wmi_bmof iTCO_wdt intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul snd_pcm rtsx_pci_ms mei_me snd_timer memstick snd pcspkr mei soundcore i2c_i801 tpm_tis psmouse shpchp wmi tpm_tis_core tpm video hp_wireless acpi_pad rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci mfd_core xhci_pci xhci_hcd i2c_hid i2c_core [last unloaded: igb] [ 680.831085] CPU: 1 PID: 78 Comm: kworker/u16:1 Tainted: G O 4.15.0-rc3Lyude-Test+ #6 [ 680.831596] Hardware name: HP HP ZBook Studio G4/826B, BIOS P71 Ver. 01.03 06/09/2017 [ 680.832168] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 680.832687] RIP: 0010:free_msi_irqs+0x180/0x1b0 [ 680.833271] RSP: 0018:ffffc9000030fbf0 EFLAGS: 00010286 [ 680.833761] RAX: ffff8803405f9c00 RBX: ffff88033e3d2e40 RCX: 000000000000002c [ 680.834278] RDX: 0000000000000000 RSI: 00000000000000ac RDI: ffff880340be2178 [ 680.834832] RBP: 0000000000000000 R08: ffff880340be1ff0 R09: ffff8803405f9c00 [ 680.835342] R10: 0000000000000000 R11: 0000000000000040 R12: ffff88033d63a298 [ 680.835822] R13: ffff88033d63a000 R14: 0000000000000060 R15: ffff880341959000 [ 680.836332] FS: 0000000000000000(0000) GS:ffff88034f440000(0000) knlGS:0000000000000000 [ 680.836817] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 680.837360] CR2: 000055e64044afdf CR3: 0000000001c09002 CR4: 00000000003606e0 [ 680.837954] Call Trace: [ 680.838853] pci_disable_msix+0xce/0xf0 [ 680.839616] igb_reset_interrupt_capability+0x5d/0x60 [igb] [ 680.840278] igb_remove+0x9d/0x110 [igb] [ 680.840764] pci_device_remove+0x36/0xb0 [ 680.841279] device_release_driver_internal+0x157/0x220 [ 680.841739] pci_stop_bus_device+0x7d/0xa0 [ 680.842255] pci_stop_bus_device+0x2b/0xa0 [ 680.842722] pci_stop_bus_device+0x3d/0xa0 [ 680.843189] pci_stop_and_remove_bus_device+0xe/0x20 [ 680.843627] trim_stale_devices+0xf3/0x140 [ 680.844086] trim_stale_devices+0x94/0x140 [ 680.844532] trim_stale_devices+0xa6/0x140 [ 680.845031] ? get_slot_status+0x90/0xc0 [ 680.845536] acpiphp_check_bridge.part.5+0xfe/0x140 [ 680.846021] acpiphp_hotplug_notify+0x175/0x200 [ 680.846581] ? free_bridge+0x100/0x100 [ 680.847113] acpi_device_hotplug+0x8a/0x490 [ 680.847535] acpi_hotplug_work_fn+0x1a/0x30 [ 680.848076] process_one_work+0x182/0x3a0 [ 680.848543] worker_thread+0x2e/0x380 [ 680.848963] ? process_one_work+0x3a0/0x3a0 [ 680.849373] kthread+0x111/0x130 [ 680.849776] ? kthread_create_worker_on_cpu+0x50/0x50 [ 680.850188] ret_from_fork+0x1f/0x30 [ 680.850601] Code: 43 14 85 c0 0f 84 d5 fe ff ff 31 ed eb 0f 83 c5 01 39 6b 14 0f 86 c5 fe ff ff 8b 7b 10 01 ef e8 b7 e4 d2 ff 48 83 78 70 00 74 e3 <0f> 0b 49 8d b5 a0 00 00 00 e8 62 6f d3 ff e9 c7 fe ff ff 48 8b [ 680.851497] RIP: free_msi_irqs+0x180/0x1b0 RSP: ffffc9000030fbf0 As it turns out, normally the freeing of IRQs that would fix this is called inside of the scope of __igb_close(). However, since the device is already gone by the point we try to unregister the netdevice from the driver due to a hotplug we end up seeing that the netif isn't present and thus, forget to free any of the device IRQs. So: make sure that if we're in the process of dismantling the netdev, we always allow __igb_close() to be called so that IRQs may be freed normally. Additionally, only allow igb_close() to be called from __igb_close() if it hasn't already been called for the given adapter. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 9474933caf21 ("igb: close/suspend race in netif_device_detach") Cc: Todd Fujinaka <todd.fujinaka@intel.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSEJesse Chan
commit d822401d1c6898a4a4ee03977b78b8cec402e88a upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/mtd/nand/denali_pci.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc@linux.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-15 19:15:01 +0000