summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-07-21Linux 4.11.12v4.11.12Greg Kroah-Hartman
2017-07-21kvm: vmx: allow host to access guest MSR_IA32_BNDCFGSHaozhong Zhang
commit 691bd4340bef49cf7e5855d06cf24444b5bf2d85 upstream. It's easier for host applications, such as QEMU, if they can always access guest MSR_IA32_BNDCFGS in VMCS, even though MPX is disabled in guest cpuid. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21kvm: vmx: Check value written to IA32_BNDCFGSJim Mattson
commit 4531662d1abf6c1f0e5c2b86ddb60e61509786c8 upstream. Bits 11:2 must be zero and the linear addess in bits 63:12 must be canonical. Otherwise, WRMSR(BNDCFGS) should raise #GP. Fixes: 0dd376e709975779 ("KVM: x86: add MSR_IA32_BNDCFGS to msrs_to_save") Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21kvm: x86: Guest BNDCFGS requires guest MPX supportJim Mattson
commit 4439af9f911ae0243ffe4e2dfc12bace49605d8b upstream. The BNDCFGS MSR should only be exposed to the guest if the guest supports MPX. (cf. the TSC_AUX MSR and RDTSCP.) Fixes: 0dd376e709975779 ("KVM: x86: add MSR_IA32_BNDCFGS to msrs_to_save") Change-Id: I3ad7c01bda616715137ceac878f3fa7e66b6b387 Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21kvm: vmx: Do not disable intercepts for BNDCFGSJim Mattson
commit a8b6fda38f80e75afa3b125c9e7f2550b579454b upstream. The MSR permission bitmaps are shared by all VMs. However, some VMs may not be configured to support MPX, even when the host does. If the host supports VMX and the guest does not, we should intercept accesses to the BNDCFGS MSR, so that we can synthesize a #GP fault. Furthermore, if the host does not support MPX and the "ignore_msrs" kvm kernel parameter is set, then we should intercept accesses to the BNDCFGS MSR, so that we can skip over the rdmsr/wrmsr without raising a #GP fault. Fixes: da8999d31818fdc8 ("KVM: x86: Intel MPX vmx and msr handle") Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21PM / QoS: return -EINVAL for bogus stringsDan Carpenter
commit 2ca30331c156ca9e97643ad05dd8930b8fe78b01 upstream. In the current code, if the user accidentally writes a bogus command to this sysfs file, then we set the latency tolerance to an uninitialized variable. Fixes: 2d984ad132a8 (PM / QoS: Introcuce latency tolerance device PM QoS type) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21ALSA: x86: Clear the pdata.notify_lpe_audio pointer before teardownVille Syrjälä
commit 8d5c30308d7c5a17db96fa5452c0232f633377c2 upstream. Clear the notify function pointer in the platform data before we tear down the driver. Otherwise i915 would end up calling a stale function pointer and possibly explode. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-3-ville.syrjala@linux.intel.com Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21PM / wakeirq: Convert to SRCUThomas Gleixner
commit ea0212f40c6bc0594c8eff79266759e3ecd4bacc upstream. The wakeirq infrastructure uses RCU to protect the list of wakeirqs. That breaks the irq bus locking infrastructure, which is allows sleeping functions to be called so interrupt controllers behind slow busses, e.g. i2c, can be handled. The wakeirq functions hold rcu_read_lock and call into irq functions, which in case of interrupts using the irq bus locking will trigger a might_sleep() splat. Convert the wakeirq infrastructure to Sleepable RCU and unbreak it. Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Reported-by: Brian Norris <briannorris@chromium.org> Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21sched/topology: Fix overlapping sched_group_maskPeter Zijlstra
commit 73bb059f9b8a00c5e1bf2f7ca83138c05d05e600 upstream. The point of sched_group_mask is to select those CPUs from sched_group_cpus that can actually arrive at this balance domain. The current code gets it wrong, as can be readily demonstrated with a topology like: node 0 1 2 3 0: 10 20 30 20 1: 20 10 20 30 2: 30 20 10 20 3: 20 30 20 10 Where (for example) domain 1 on CPU1 ends up with a mask that includes CPU0: [] CPU1 attaching sched-domain: [] domain 0: span 0-2 level NUMA [] groups: 1 (mask: 1), 2, 0 [] domain 1: span 0-3 level NUMA [] groups: 0-2 (mask: 0-2) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072) This causes sched_balance_cpu() to compute the wrong CPU and consequently should_we_balance() will terminate early resulting in missed load-balance opportunities. The fixed topology looks like: [] CPU1 attaching sched-domain: [] domain 0: span 0-2 level NUMA [] groups: 1 (mask: 1), 2, 0 [] domain 1: span 0-3 level NUMA [] groups: 0-2 (mask: 1) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072) (note: this relies on OVERLAP domains to always have children, this is true because the regular topology domains are still here -- this is before degenerate trimming) Debugged-by: Lauro Ramos Venancio <lvenanci@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: e3589f6c81e4 ("sched: Allow for overlapping sched_domain spans") Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21sched/topology: Optimize build_group_mask()Lauro Ramos Venancio
commit f32d782e31bf079f600dcec126ed117b0577e85c upstream. The group mask is always used in intersection with the group CPUs. So, when building the group mask, we don't have to care about CPUs that are not part of the group. Signed-off-by: Lauro Ramos Venancio <lvenanci@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: lwang@redhat.com Cc: riel@redhat.com Link: http://lkml.kernel.org/r/1492717903-5195-2-git-send-email-lvenanci@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21sched/topology: Fix building of overlapping sched-groupsPeter Zijlstra
commit 0372dd2736e02672ac6e189c31f7d8c02ad543cd upstream. When building the overlapping groups, we very obviously should start with the previous domain of _this_ @cpu, not CPU-0. This can be readily demonstrated with a topology like: node 0 1 2 3 0: 10 20 30 20 1: 20 10 20 30 2: 30 20 10 20 3: 20 30 20 10 Where (for example) CPU1 ends up generating the following nonsensical groups: [] CPU1 attaching sched-domain: [] domain 0: span 0-2 level NUMA [] groups: 1 2 0 [] domain 1: span 0-3 level NUMA [] groups: 1-3 (cpu_capacity = 3072) 0-1,3 (cpu_capacity = 3072) Where the fact that domain 1 doesn't include a group with span 0-2 is the obvious fail. With patch this looks like: [] CPU1 attaching sched-domain: [] domain 0: span 0-2 level NUMA [] groups: 1 0 2 [] domain 1: span 0-3 level NUMA [] groups: 0-2 (cpu_capacity = 3072) 0,2-3 (cpu_capacity = 3072) Debugged-by: Lauro Ramos Venancio <lvenanci@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: e3589f6c81e4 ("sched: Allow for overlapping sched_domain spans") Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21sched/fair, cpumask: Export for_each_cpu_wrap()Peter Zijlstra
commit c6508a39640b9a27fc2bc10cb708152672c82045 upstream. commit c743f0a5c50f2fcbc628526279cfa24f3dabe182 upstream. More users for for_each_cpu_wrap() have appeared. Promote the construct to generic cpumask interface. The implementation is slightly modified to reduce arguments. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Lauro Ramos Venancio <lvenanci@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: lwang@redhat.com Link: http://lkml.kernel.org/r/20170414122005.o35me2h5nowqkxbv@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21crypto: caam - fix signals handlingHoria Geantă
commit 7459e1d25ffefa2b1be799477fcc1f6c62f6cec7 upstream. Driver does not properly handle the case when signals interrupt wait_for_completion_interruptible(): -it does not check for return value -completion structure is allocated on stack; in case a signal interrupts the sleep, it will go out of scope, causing the worker thread (caam_jr_dequeue) to fail when it accesses it wait_for_completion_interruptible() is replaced with uninterruptable wait_for_completion(). We choose to block all signals while waiting for I/O (device executing the split key generation job descriptor) since the alternative - in order to have a deterministic device state - would be to flush the job ring (aborting *all* in-progress jobs). Fixes: 045e36780f115 ("crypto: caam - ahash hmac support") Fixes: 4c1ec1f930154 ("crypto: caam - refactor key_gen, sg") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21crypto: caam - properly set IV after {en,de}cryptDavid Gstir
commit 854b06f768794cd664886ec3ba3a5b1c58d42167 upstream. Certain cipher modes like CTS expect the IV (req->info) of ablkcipher_request (or equivalently req->iv of skcipher_request) to contain the last ciphertext block when the {en,de}crypt operation is done. This is currently not the case for the CAAM driver which in turn breaks e.g. cts(cbc(aes)) when the CAAM driver is enabled. This patch fixes the CAAM driver to properly set the IV after the {en,de}crypt operation of ablkcipher finishes. This issue was revealed by the changes in the SW CTS mode in commit 0605c41cc53ca ("crypto: cts - Convert to skcipher") Signed-off-by: David Gstir <david@sigma-star.at> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21crypto: sha1-ssse3 - Disable avx2Herbert Xu
commit b82ce24426a4071da9529d726057e4e642948667 upstream. It has been reported that sha1-avx2 can cause page faults by reading beyond the end of the input. This patch disables it until it can be fixed. Fixes: 7c1da8d0d046 ("crypto: sha - SHA1 transform x86_64 AVX2") Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21crypto: atmel - only treat EBUSY as transient if backlogGilad Ben-Yossef
commit 1606043f214f912a52195293614935811a6e3e53 upstream. The Atmel SHA driver was treating -EBUSY as indication of queueing to backlog without checking that backlog is enabled for the request. Fix it by checking request flags. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21crypto: talitos - Extend max key length for SHA384/512-HMAC and AEADMartin Hicks
commit 03d2c5114c95797c0aa7d9f463348b171a274fd4 upstream. An updated patch that also handles the additional key length requirements for the AEAD algorithms. The max keysize is not 96. For SHA384/512 it's 128, and for the AEAD algorithms it's longer still. Extend the max keysize for the AEAD size for AES256 + HMAC(SHA512). Fixes: 357fb60502ede ("crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms") Signed-off-by: Martin Hicks <mort@bork.org> Acked-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21mm: fix overflow check in expand_upwards()Helge Deller
commit 37511fb5c91db93d8bd6e3f52f86e5a7ff7cfcdf upstream. Jörn Engel noticed that the expand_upwards() function might not return -ENOMEM in case the requested address is (unsigned long)-PAGE_SIZE and if the architecture didn't defined TASK_SIZE as multiple of PAGE_SIZE. Affected architectures are arm, frv, m68k, blackfin, h8300 and xtensa which all define TASK_SIZE as 0xffffffff, but since none of those have an upwards-growing stack we currently have no actual issue. Nevertheless let's fix this just in case any of the architectures with an upward-growing stack (currently parisc, metag and partly ia64) define TASK_SIZE similar. Link: http://lkml.kernel.org/r/20170702192452.GA11868@p100.box Fixes: bd726c90b6b8 ("Allow stack to grow up to address space limit") Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: Jörn Engel <joern@purestorage.com> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21selftests/capabilities: Fix the test_execve testAndy Lutomirski
commit 796a3bae2fba6810427efdb314a1c126c9490fb3 upstream. test_execve does rather odd mount manipulations to safely create temporary setuid and setgid executables that aren't visible to the rest of the system. Those executables end up in the test's cwd, but that cwd is MNT_DETACHed. The core namespace code considers MNT_DETACHed trees to belong to no mount namespace at all and, in general, MNT_DETACHed trees are only barely function. This interacted with commit 380cf5ba6b0a ("fs: Treat foreign mounts as nosuid") to cause all MNT_DETACHed trees to act as though they're nosuid, breaking the test. Fix it by just not detaching the tree. It's still in a private mount namespace and is therefore still invisible to the rest of the system (except via /proc, and the same nosuid logic will protect all other programs on the system from believing in test_execve's setuid bits). While we're at it, fix some blatant whitespace problems. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 380cf5ba6b0a ("fs: Treat foreign mounts as nosuid") Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Greg KH <greg@kroah.com> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21mnt: Make propagate_umount less slow for overlapping mount propagation treesEric W. Biederman
commit 296990deb389c7da21c78030376ba244dc1badf5 upstream. Andrei Vagin pointed out that time to executue propagate_umount can go non-linear (and take a ludicrious amount of time) when the mount propogation trees of the mounts to be unmunted by a lazy unmount overlap. Make the walk of the mount propagation trees nearly linear by remembering which mounts have already been visited, allowing subsequent walks to detect when walking a mount propgation tree or a subtree of a mount propgation tree would be duplicate work and to skip them entirely. Walk the list of mounts whose propgatation trees need to be traversed from the mount highest in the mount tree to mounts lower in the mount tree so that odds are higher that the code will walk the largest trees first, allowing later tree walks to be skipped entirely. Add cleanup_umount_visitation to remover the code's memory of which mounts have been visited. Add the functions last_slave and skip_propagation_subtree to allow skipping appropriate parts of the mount propagation tree without needing to change the logic of the rest of the code. A script to generate overlapping mount propagation trees: $ cat runs.h set -e mount -t tmpfs zdtm /mnt mkdir -p /mnt/1 /mnt/2 mount -t tmpfs zdtm /mnt/1 mount --make-shared /mnt/1 mkdir /mnt/1/1 iteration=10 if [ -n "$1" ] ; then iteration=$1 fi for i in $(seq $iteration); do mount --bind /mnt/1/1 /mnt/1/1 done mount --rbind /mnt/1 /mnt/2 TIMEFORMAT='%Rs' nr=$(( ( 2 ** ( $iteration + 1 ) ) + 1 )) echo -n "umount -l /mnt/1 -> $nr " time umount -l /mnt/1 nr=$(cat /proc/self/mountinfo | grep zdtm | wc -l ) time umount -l /mnt/2 $ for i in $(seq 9 19); do echo $i; unshare -Urm bash ./run.sh $i; done Here are the performance numbers with and without the patch: mhash | 8192 | 8192 | 1048576 | 1048576 mounts | before | after | before | after ------------------------------------------------ 1025 | 0.040s | 0.016s | 0.038s | 0.019s 2049 | 0.094s | 0.017s | 0.080s | 0.018s 4097 | 0.243s | 0.019s | 0.206s | 0.023s 8193 | 1.202s | 0.028s | 1.562s | 0.032s 16385 | 9.635s | 0.036s | 9.952s | 0.041s 32769 | 60.928s | 0.063s | 44.321s | 0.064s 65537 | | 0.097s | | 0.097s 131073 | | 0.233s | | 0.176s 262145 | | 0.653s | | 0.344s 524289 | | 2.305s | | 0.735s 1048577 | | 7.107s | | 2.603s Andrei Vagin reports fixing the performance problem is part of the work to fix CVE-2016-6213. Fixes: a05964f3917c ("[PATCH] shared mounts handling: umount") Reported-by: Andrei Vagin <avagin@openvz.org> Reviewed-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21mnt: In propgate_umount handle visiting mounts in any orderEric W. Biederman
commit 99b19d16471e9c3faa85cad38abc9cbbe04c6d55 upstream. While investigating some poor umount performance I realized that in the case of overlapping mount trees where some of the mounts are locked the code has been failing to unmount all of the mounts it should have been unmounting. This failure to unmount all of the necessary mounts can be reproduced with: $ cat locked_mounts_test.sh mount -t tmpfs test-base /mnt mount --make-shared /mnt mkdir -p /mnt/b mount -t tmpfs test1 /mnt/b mount --make-shared /mnt/b mkdir -p /mnt/b/10 mount -t tmpfs test2 /mnt/b/10 mount --make-shared /mnt/b/10 mkdir -p /mnt/b/10/20 mount --rbind /mnt/b /mnt/b/10/20 unshare -Urm --propagation unchaged /bin/sh -c 'sleep 5; if [ $(grep test /proc/self/mountinfo | wc -l) -eq 1 ] ; then echo SUCCESS ; else echo FAILURE ; fi' sleep 1 umount -l /mnt/b wait %% $ unshare -Urm ./locked_mounts_test.sh This failure is corrected by removing the prepass that marks mounts that may be umounted. A first pass is added that umounts mounts if possible and if not sets mount mark if they could be unmounted if they weren't locked and adds them to a list to umount possibilities. This first pass reconsiders the mounts parent if it is on the list of umount possibilities, ensuring that information of umoutability will pass from child to mount parent. A second pass then walks through all mounts that are umounted and processes their children unmounting them or marking them for reparenting. A last pass cleans up the state on the mounts that could not be umounted and if applicable reparents them to their first parent that remained mounted. While a bit longer than the old code this code is much more robust as it allows information to flow up from the leaves and down from the trunk making the order in which mounts are encountered in the umount propgation tree irrelevant. Fixes: 0c56fe31420c ("mnt: Don't propagate unmounts to locked mounts") Reviewed-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21mnt: In umount propagation reparent in a separate passEric W. Biederman
commit 570487d3faf2a1d8a220e6ee10f472163123d7da upstream. It was observed that in some pathlogical cases that the current code does not unmount everything it should. After investigation it was determined that the issue is that mnt_change_mntpoint can can change which mounts are available to be unmounted during mount propagation which is wrong. The trivial reproducer is: $ cat ./pathological.sh mount -t tmpfs test-base /mnt cd /mnt mkdir 1 2 1/1 mount --bind 1 1 mount --make-shared 1 mount --bind 1 2 mount --bind 1/1 1/1 mount --bind 1/1 1/1 echo grep test-base /proc/self/mountinfo umount 1/1 echo grep test-base /proc/self/mountinfo $ unshare -Urm ./pathological.sh The expected output looks like: 46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000 47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000 47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 The output without the fix looks like: 46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000 47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000 47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 52 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 That last mount in the output was in the propgation tree to be unmounted but was missed because the mnt_change_mountpoint changed it's parent before the walk through the mount propagation tree observed it. Fixes: 1064f874abc0 ("mnt: Tuck mounts under others instead of creating shadow/side mounts.") Acked-by: Andrei Vagin <avagin@virtuozzo.com> Reviewed-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21Drivers: hv: vmbus: Close timing hole that can corrupt per-cpu pageMichael Kelley
commit 13b9abfc92be7c4454bff912021b9f835dea6e15 upstream. Extend the disabling of preemption to include the hypercall so that another thread can't get the CPU and corrupt the per-cpu page used for hypercall arguments. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21nvmem: core: fix leaks on registration errorsJohan Hovold
commit 3360acdf839170b612f5b212539694c20e3f16d0 upstream. Make sure to deregister and release the nvmem device and underlying memory on registration errors. Note that the private data must be freed using put_device() once the struct device has been initialised. Also note that there's a related reference leak in the deregistration function as reported by Mika Westerberg which is being fixed separately. Fixes: b6c217ab9be6 ("nvmem: Add backwards compatibility support for older EEPROM drivers.") Fixes: eace75cfdcf7 ("nvmem: Add a simple NVMEM framework for nvmem providers") Cc: Andrew Lunn <andrew@lunn.ch> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21rcu: Add memory barriers for NOCB leader wakeupPaul E. McKenney
commit 6b5fc3a1331810db407c9e0e673dc1837afdc9d0 upstream. Wait/wakeup operations do not guarantee ordering on their own. Instead, either locking or memory barriers are required. This commit therefore adds memory barriers to wake_nocb_leader() and nocb_leader_wait(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Krister Johansen <kjlx@templeofstupid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21vt: fix unchecked __put_user() in tioclinux ioctlsAdam Borowski
commit 6987dc8a70976561d22450b5858fc9767788cc1c upstream. Only read access is checked before this call. Actually, at the moment this is not an issue, as every in-tree arch does the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU to tell them apart, but this wasn't the case in the past and may happen again on some odd arch in the future. If anyone cares about 3.7 and earlier, this is a security hole (untested) on real 80386 CPUs. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21arm64: Preventing READ_IMPLIES_EXEC propagationDong Bo
commit 48f99c8ec0b25756d0283ab058826ae07d14fad7 upstream. Like arch/arm/, we inherit the READ_IMPLIES_EXEC personality flag across fork(). This is undesirable for a number of reasons: * ELF files that don't require executable stack can end up with it anyway * We end up performing un-necessary I-cache maintenance when mapping what should be non-executable pages * Restricting what is executable is generally desirable when defending against overflow attacks This patch clears the personality flag when setting up the personality for newly spwaned native tasks. Given that semi-recent AArch64 toolchains emit a non-executable PT_GNU_STACK header, userspace applications can already not rely on READ_IMPLIES_EXEC so shouldn't be adversely affected by this change. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Dong Bo <dongbo4@huawei.com> [will: added comment to compat code, rewrote commit message] Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiersMarc Zyngier
commit 88cda00733f0731711c76e535d4972c296ac512e upstream. Contrary to popular belief, PPIs connected to a GICv3 to not have an affinity field similar to that of GICv2. That is consistent with the fact that GICv3 is designed to accomodate thousands of CPUs, and fitting them as a bitmap in a byte is... difficult. Fixes: adbc3695d9e4 ("arm64: dts: add the Marvell Armada 3700 family and a development board") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21powerpc/kexec: Fix radix to hash kexec due to IAMR/AMORBalbir Singh
commit 1e2a516e89fc412a754327522ab271b42f99c6b4 upstream. This patch fixes a crash seen while doing a kexec from radix mode to hash mode. Key 0 is special in hash and used in the RPN by default, we set the key values to 0 today. In radix mode key 0 is used to control supervisor<->user access. In hash key 0 is used by default, so the first instruction after the switch causes a crash on kexec. Commit 3b10d0095a1e ("powerpc/mm/radix: Prevent kernel execution of user space") introduced the setting of IAMR and AMOR values to prevent execution of user mode instructions from supervisor mode. We need to clean up these SPR's on kexec. Fixes: 3b10d0095a1e ("powerpc/mm/radix: Prevent kernel execution of user space") Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21exec: Limit arg stack to at most 75% of _STK_LIMKees Cook
commit da029c11e6b12f321f36dac8771e833b65cec962 upstream. To avoid pathological stack usage or the need to special-case setuid execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21s390: reduce ELF_ET_DYN_BASEKees Cook
commit a73dc5370e153ac63718d850bddf0c9aa9d871e6 upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, which is the traditional x86 minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). For s390 the position could be 0x10000, but that is needlessly close to the NULL address. Link: http://lkml.kernel.org/r/1498154792-49952-5-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21powerpc: move ELF_ET_DYN_BASE to 4GB / 4MBKees Cook
commit 47ebb09d54856500c5a5e14824781902b3bb738e upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, which is the traditional x86 minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). Link: http://lkml.kernel.org/r/1498154792-49952-4-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21arm64: move ELF_ET_DYN_BASE to 4GB / 4MBKees Cook
commit 02445990a96e60a67526510d8b00f7e3d14101c3 upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, to match ARM. This could be 0x8000, the standard ET_EXEC load address, but that is needlessly close to the NULL address, and anyone running arm compat PIE will have an MMU, so the tight mapping is not needed. Link: http://lkml.kernel.org/r/1498251600-132458-4-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21arm: move ELF_ET_DYN_BASE to 4MBKees Cook
commit 6a9af90a3bcde217a1c053e135f5f43e5d5fafbd upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. 4MB is chosen here mainly to have parity with x86, where this is the traditional minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). For ARM the position could be 0x8000, the standard ET_EXEC load address, but that is needlessly close to the NULL address, and anyone running PIE on 32-bit ARM will have an MMU, so the tight mapping is not needed. Link: http://lkml.kernel.org/r/1498154792-49952-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Qualys Security Advisory <qsa@qualys.com> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21binfmt_elf: use ELF_ET_DYN_BASE only for PIEKees Cook
commit eab09532d40090698b05a07c1c87f39fdbc5fab5 upstream. The ELF_ET_DYN_BASE position was originally intended to keep loaders away from ET_EXEC binaries. (For example, running "/lib/ld-linux.so.2 /bin/cat" might cause the subsequent load of /bin/cat into where the loader had been loaded.) With the advent of PIE (ET_DYN binaries with an INTERP Program Header), ELF_ET_DYN_BASE continued to be used since the kernel was only looking at ET_DYN. However, since ELF_ET_DYN_BASE is traditionally set at the top 1/3rd of the TASK_SIZE, a substantial portion of the address space is unused. For 32-bit tasks when RLIMIT_STACK is set to RLIM_INFINITY, programs are loaded above the mmap region. This means they can be made to collide (CVE-2017-1000370) or nearly collide (CVE-2017-1000371) with pathological stack regions. Lowering ELF_ET_DYN_BASE solves both by moving programs below the mmap region in all cases, and will now additionally avoid programs falling back to the mmap region by enforcing MAP_FIXED for program loads (i.e. if it would have collided with the stack, now it will fail to load instead of falling back to the mmap region). To allow for a lower ELF_ET_DYN_BASE, loaders (ET_DYN without INTERP) are loaded into the mmap region, leaving space available for either an ET_EXEC binary with a fixed location or PIE being loaded into mmap by the loader. Only PIE programs are loaded offset from ELF_ET_DYN_BASE, which means architectures can now safely lower their values without risk of loaders colliding with their subsequently loaded programs. For 64-bit, ELF_ET_DYN_BASE is best set to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. Thanks to PaX Team, Daniel Micay, and Rik van Riel for inspiration and suggestions on how to implement this solution. Fixes: d1fd836dcf00 ("mm: split ET_DYN ASLR from mmap ASLR") Link: http://lkml.kernel.org/r/20170621173201.GA114489@beast Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Rik van Riel <riel@redhat.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Qualys Security Advisory <qsa@qualys.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Pratyush Anand <panand@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21checkpatch: silence perl 5.26.0 unescaped left brace warningsCyril Bur
commit 8d81ae05d0176da1c54aeaed697fa34be5c5575e upstream. As of perl 5, version 26, subversion 0 (v5.26.0) some new warnings have occurred when running checkpatch. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3544. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3885. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(\+.*(?:do|\))){ <-- HERE / at scripts/checkpatch.pl line 4374. It seems perfectly reasonable to do as the warning suggests and simply escape the left brace in these three locations. Link: http://lkml.kernel.org/r/20170607060135.17384-1-cyrilbur@gmail.com Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21fs/dcache.c: fix spin lockup issue on nlru->lockSahitya Tummala
commit b17c070fb624cf10162cf92ea5e1ec25cd8ac176 upstream. __list_lru_walk_one() acquires nlru spin lock (nlru->lock) for longer duration if there are more number of items in the lru list. As per the current code, it can hold the spin lock for upto maximum UINT_MAX entries at a time. So if there are more number of items in the lru list, then "BUG: spinlock lockup suspected" is observed in the below path: spin_bug+0x90 do_raw_spin_lock+0xfc _raw_spin_lock+0x28 list_lru_add+0x28 dput+0x1c8 path_put+0x20 terminate_walk+0x3c path_lookupat+0x100 filename_lookup+0x6c user_path_at_empty+0x54 SyS_faccessat+0xd0 el0_svc_naked+0x24 This nlru->lock is acquired by another CPU in this path - d_lru_shrink_move+0x34 dentry_lru_isolate_shrink+0x48 __list_lru_walk_one.isra.10+0x94 list_lru_walk_node+0x40 shrink_dcache_sb+0x60 do_remount_sb+0xbc do_emergency_remount+0xb0 process_one_work+0x228 worker_thread+0x2e0 kthread+0xf4 ret_from_fork+0x10 Fix this lockup by reducing the number of entries to be shrinked from the lru list to 1024 at once. Also, add cond_resched() before processing the lru list again. Link: http://marc.info/?t=149722864900001&r=1&w=2 Link: http://lkml.kernel.org/r/1498707575-2472-1-git-send-email-stummala@codeaurora.org Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Suggested-by: Jan Kara <jack@suse.cz> Suggested-by: Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Alexander Polakov <apolyakov@beget.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21mm/list_lru.c: fix list_lru_count_node() to be race freeSahitya Tummala
commit 2c80cd57c74339889a8752b20862a16c28929c3a upstream. list_lru_count_node() iterates over all memcgs to get the total number of entries on the node but it can race with memcg_drain_all_list_lrus(), which migrates the entries from a dead cgroup to another. This can return incorrect number of entries from list_lru_count_node(). Fix this by keeping track of entries per node and simply return it in list_lru_count_node(). Link: http://lkml.kernel.org/r/1498707555-30525-1-git-send-email-stummala@codeaurora.org Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Alexander Polakov <apolyakov@beget.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21kernel/extable.c: mark core_kernel_text notraceMarcin Nowakowski
commit c0d80ddab89916273cb97114889d3f337bc370ae upstream. core_kernel_text is used by MIPS in its function graph trace processing, so having this method traced leads to an infinite set of recursive calls such as: Call Trace: ftrace_return_to_handler+0x50/0x128 core_kernel_text+0x10/0x1b8 prepare_ftrace_return+0x6c/0x114 ftrace_graph_caller+0x20/0x44 return_to_handler+0x10/0x30 return_to_handler+0x0/0x30 return_to_handler+0x0/0x30 ftrace_ops_no_ops+0x114/0x1bc core_kernel_text+0x10/0x1b8 core_kernel_text+0x10/0x1b8 core_kernel_text+0x10/0x1b8 ftrace_ops_no_ops+0x114/0x1bc core_kernel_text+0x10/0x1b8 prepare_ftrace_return+0x6c/0x114 ftrace_graph_caller+0x20/0x44 (...) Mark the function notrace to avoid it being traced. Link: http://lkml.kernel.org/r/1498028607-6765-1-git-send-email-marcin.nowakowski@imgtec.com Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21thp, mm: fix crash due race in MADV_FREE handlingKirill A. Shutemov
commit bbf29ffc7f963bb894f84f0580c70cfea01c3892 upstream. Reinette reported the following crash: BUG: Bad page state in process log2exe pfn:57600 page:ffffea00015d8000 count:0 mapcount:0 mapping: (null) index:0x20200 flags: 0x4000000000040019(locked|uptodate|dirty|swapbacked) raw: 4000000000040019 0000000000000000 0000000000020200 00000000ffffffff raw: ffffea00015d8020 ffffea00015d8020 0000000000000000 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x1(locked) Modules linked in: rfcomm 8021q bnep intel_rapl x86_pkg_temp_thermal coretemp efivars btusb btrtl btbcm pwm_lpss_pci snd_hda_codec_hdmi btintel pwm_lpss snd_hda_codec_realtek snd_soc_skl snd_hda_codec_generic snd_soc_skl_ipc spi_pxa2xx_platform snd_soc_sst_ipc snd_soc_sst_dsp i2c_designware_platform i2c_designware_core snd_hda_ext_core snd_soc_sst_match snd_hda_intel snd_hda_codec mei_me snd_hda_core mei snd_soc_rt286 snd_soc_rl6347a snd_soc_core efivarfs CPU: 1 PID: 354 Comm: log2exe Not tainted 4.12.0-rc7-test-test #19 Hardware name: Intel corporation NUC6CAYS/NUC6CAYB, BIOS AYAPLCEL.86A.0027.2016.1108.1529 11/08/2016 Call Trace: bad_page+0x16a/0x1f0 free_pages_check_bad+0x117/0x190 free_hot_cold_page+0x7b1/0xad0 __put_page+0x70/0xa0 madvise_free_huge_pmd+0x627/0x7b0 madvise_free_pte_range+0x6f8/0x1150 __walk_page_range+0x6b5/0xe30 walk_page_range+0x13b/0x310 madvise_free_page_range.isra.16+0xad/0xd0 madvise_free_single_vma+0x2e4/0x470 SyS_madvise+0x8ce/0x1450 If somebody frees the page under us and we hold the last reference to it, put_page() would attempt to free the page before unlocking it. The fix is trivial reorder of operations. Dave said: "I came up with the exact same patch. For posterity, here's the test case, generated by syzkaller and trimmed down by Reinette: https://www.sr71.net/~dave/intel/log2.c And the config that helps detect this: https://www.sr71.net/~dave/intel/config-log2" Fixes: b8d3c4c3009d ("mm/huge_memory.c: don't split THP page when MADV_FREE syscall is called") Link: http://lkml.kernel.org/r/20170628101249.17879-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21tools/lib/lockdep: Reduce MAX_LOCK_DEPTH to avoid overflowing lock_chain/: DepthBen Hutchings
commit 98dcea0cfd04e083ac74137ceb9a632604740e2d upstream. liblockdep has been broken since commit 75dd602a5198 ("lockdep: Fix lock_chain::base size"), as that adds a check that MAX_LOCK_DEPTH is within the range of lock_chain::depth and in liblockdep it is much too large. That should have resulted in a compiler error, but didn't because: - the check uses ARRAY_SIZE(), which isn't yet defined in liblockdep so is assumed to be an (undeclared) function - putting a function call inside a BUILD_BUG_ON() expression quietly turns it into some nonsense involving a variable-length array It did produce a compiler warning, but I didn't notice because liblockdep already produces too many warnings if -Wall is enabled (which I'll fix shortly). Even before that commit, which reduced lock_chain::depth from 8 bits to 6, MAX_LOCK_DEPTH was too large. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/20170525130005.5947-3-alexander.levin@verizon.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21parisc/mm: Ensure IRQs are off in switch_mm()Helge Deller
commit 649aa24254e85bf6bd7807dd372d083707852b1f upstream. This is because of commit f98db6013c55 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") in which switch_mm_irqs_off() is called by the scheduler, vs switch_mm() which is used by use_mm(). This patch lets the parisc code mirror the x86 and powerpc code, ie. it disables interrupts in switch_mm(), and optimises the scheduler case by defining switch_mm_irqs_off(). Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devsThomas Bogendoerfer
commit 33f9e02495d15a061f0c94ef46f5103a2d0c20f3 upstream. Enabling parport pc driver on a B2600 (and probably other 64bit PARISC systems) produced following BUG: CPU: 0 PID: 1 Comm: swapper Not tainted 4.12.0-rc5-30198-g1132d5e #156 task: 000000009e050000 task.stack: 000000009e04c000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001101111111100001111 Not tainted r00-03 000000ff0806ff0f 000000009e04c990 0000000040871b78 000000009e04cac0 r04-07 0000000040c14de0 ffffffffffffffff 000000009e07f098 000000009d82d200 r08-11 000000009d82d210 0000000000000378 0000000000000000 0000000040c345e0 r12-15 0000000000000005 0000000040c345e0 0000000000000000 0000000040c9d5e0 r16-19 0000000040c345e0 00000000f00001c4 00000000f00001bc 0000000000000061 r20-23 000000009e04ce28 0000000000000010 0000000000000010 0000000040b89e40 r24-27 0000000000000003 0000000000ffffff 000000009d82d210 0000000040c14de0 r28-31 0000000000000000 000000009e04ca90 000000009e04cb40 0000000000000000 sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000404aece0 00000000404aece4 IIR: 03ffe01f ISR: 0000000010340000 IOR: 000001781304cac8 CPU: 0 CR30: 000000009e04c000 CR31: 00000000e2976de2 ORIG_R28: 0000000000000200 IAOQ[0]: sba_dma_supported+0x80/0xd0 IAOQ[1]: sba_dma_supported+0x84/0xd0 RP(r2): parport_pc_probe_port+0x178/0x1200 Cause is a call to dma_coerce_mask_and_coherenet in parport_pc_probe_port, which PARISC DMA API doesn't handle very nicely. This commit gives back DMA_ERROR_CODE for DMA API calls, if device isn't capable of DMA transaction. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21parisc: use compat_sys_keyctl()Eric Biggers
commit b0f94efd5aa8daa8a07d7601714c2573266cd4c9 upstream. Architectures with a compat syscall table must put compat_sys_keyctl() in it, not sys_keyctl(). The parisc architecture was not doing this; fix it. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21parisc: Report SIGSEGV instead of SIGBUS when running out of stackHelge Deller
commit 247462316f85a9e0479445c1a4223950b68ffac1 upstream. When a process runs out of stack the parisc kernel wrongly faults with SIGBUS instead of the expected SIGSEGV signal. This example shows how the kernel faults: do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000] trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000 The vma->vm_end value is the first address which does not belong to the vma, so adjust the check to include vma->vm_end to the range for which to send the SIGSEGV signal. This patch unbreaks building the debian libsigsegv package. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21irqchip/gic-v3: Fix out-of-bound access in gic_set_affinitySuzuki K Poulose
commit 866d7c1b0a3c70387646c4e455e727a58c5d465a upstream. The GICv3 driver doesn't check if the target CPU for gic_set_affinity is valid before going ahead and making the changes. This triggers the following splat with KASAN: [ 141.189434] BUG: KASAN: global-out-of-bounds in gic_set_affinity+0x8c/0x140 [ 141.189704] Read of size 8 at addr ffff200009741d20 by task swapper/1/0 [ 141.189958] [ 141.190158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.12.0-rc7 [ 141.190458] Hardware name: Foundation-v8A (DT) [ 141.190658] Call trace: [ 141.190908] [<ffff200008089d70>] dump_backtrace+0x0/0x328 [ 141.191224] [<ffff20000808a1b4>] show_stack+0x14/0x20 [ 141.191507] [<ffff200008504c3c>] dump_stack+0xa4/0xc8 [ 141.191858] [<ffff20000826c19c>] print_address_description+0x13c/0x250 [ 141.192219] [<ffff20000826c5c8>] kasan_report+0x210/0x300 [ 141.192547] [<ffff20000826ad54>] __asan_load8+0x84/0x98 [ 141.192874] [<ffff20000854eeec>] gic_set_affinity+0x8c/0x140 [ 141.193158] [<ffff200008148b14>] irq_do_set_affinity+0x54/0xb8 [ 141.193473] [<ffff200008148d2c>] irq_set_affinity_locked+0x64/0xf0 [ 141.193828] [<ffff200008148e00>] __irq_set_affinity+0x48/0x78 [ 141.194158] [<ffff200008bc48a4>] arm_perf_starting_cpu+0x104/0x150 [ 141.194513] [<ffff2000080d73bc>] cpuhp_invoke_callback+0x17c/0x1f8 [ 141.194783] [<ffff2000080d94ec>] notify_cpu_starting+0x8c/0xb8 [ 141.195130] [<ffff2000080911ec>] secondary_start_kernel+0x15c/0x200 [ 141.195390] [<0000000080db81b4>] 0x80db81b4 [ 141.195603] [ 141.195685] The buggy address belongs to the variable: [ 141.196012] __cpu_logical_map+0x200/0x220 [ 141.196176] [ 141.196315] Memory state around the buggy address: [ 141.196586] ffff200009741c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.196913] ffff200009741c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.197158] >ffff200009741d00: 00 00 00 00 fa fa fa fa 00 00 00 00 00 00 00 00 [ 141.197487] ^ [ 141.197758] ffff200009741d80: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00 [ 141.198060] ffff200009741e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.198358] ================================================================== [ 141.198609] Disabling lock debugging due to kernel taint [ 141.198961] CPU1: Booted secondary processor [410fd051] This patch adds the check to make sure the cpu is valid. Fixes: commit 021f653791ad17e03f98 ("irqchip: gic-v3: Initial support for GICv3") Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21drm/amdgpu/gfx6: properly cache mc_arb_ramcfgAlex Deucher
commit 6653ebd48f493efe3f3598ff3fe7b3d5451665df upstream. This was missing for gfx6. Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21cfg80211: Check if NAN service ID is of expected sizeSrinivas Dasari
commit 0a27844ce86d039d74221dd56cd8c0349b146b63 upstream. nla policy checks for only maximum length of the attribute data when the attribute type is NLA_BINARY. If userspace sends less data than specified, cfg80211 may access illegal memory. When type is NLA_UNSPEC, nla policy check ensures that userspace sends minimum specified length number of bytes. Remove type assignment to NLA_BINARY from nla_policy of NL80211_NAN_FUNC_SERVICE_ID to make these NLA_UNSPEC and to make sure minimum NL80211_NAN_FUNC_SERVICE_ID_LEN bytes are received from userspace with NL80211_NAN_FUNC_SERVICE_ID. Fixes: a442b761b24 ("cfg80211: add add_nan_func / del_nan_func") Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21cfg80211: Check if PMKID attribute is of expected sizeSrinivas Dasari
commit 9361df14d1cbf966409d5d6f48bb334384fbe138 upstream. nla policy checks for only maximum length of the attribute data when the attribute type is NLA_BINARY. If userspace sends less data than specified, the wireless drivers may access illegal memory. When type is NLA_UNSPEC, nla policy check ensures that userspace sends minimum specified length number of bytes. Remove type assignment to NLA_BINARY from nla_policy of NL80211_ATTR_PMKID to make this NLA_UNSPEC and to make sure minimum WLAN_PMKID_LEN bytes are received from userspace with NL80211_ATTR_PMKID. Fixes: 67fbb16be69d ("nl80211: PMKSA caching support") Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIESSrinivas Dasari
commit d7f13f7450369281a5d0ea463cc69890a15923ae upstream. validate_scan_freqs() retrieves frequencies from attributes nested in the attribute NL80211_ATTR_SCAN_FREQUENCIES with nla_get_u32(), which reads 4 bytes from each attribute without validating the size of data received. Attributes nested in NL80211_ATTR_SCAN_FREQUENCIES don't have an nla policy. Validate size of each attribute before parsing to avoid potential buffer overread. Fixes: 2a519311926 ("cfg80211/nl80211: scanning (and mac80211 update to use it)") Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-24 13:12:10 +0000