summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-17Linux 3.18.92v3.18.92Greg Kroah-Hartman
2018-01-17e1000e: Fix e1000_check_for_copper_link_ich8lan return value.Benjamin Poirier
commit 4110e02eb45ea447ec6f5459c9934de0a273fb91 upstream. e1000e_check_for_copper_link() and e1000_check_for_copper_link_ich8lan() are the two functions that may be assigned to mac.ops.check_for_link when phy.media_type == e1000_media_type_copper. Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") changed the meaning of the return value of check_for_link for copper media but only adjusted the first function. This patch adjusts the second function likewise. Reported-by: Christian Hesse <list@eworm.de> Reported-by: Gabriel C <nix.or.die@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=198047 Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Christian Hesse <list@eworm.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17uas: ignore UAS for Norelsys NS1068(X) chipsIcenowy Zheng
commit 928afc85270753657b5543e052cc270c279a3fe9 upstream. The UAS mode of Norelsys NS1068(X) is reported to fail to work on several platforms with the following error message: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for unknown stream ring slot 1 ep 8 xhci-hcd xhci-hcd.0.auto: @00000000bf04a400 00000000 00000000 1b000000 01098001 And when trying to mount a partition on the disk the disk will disconnect from the USB controller, then after re-connecting the device will be offlined and not working at all. Falling back to USB mass storage can solve this problem, so ignore UAS function of this chip. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17Bluetooth: Prevent stack info leak from the EFS element.Ben Seri
commit 06e7e776ca4d36547e503279aeff996cbb292c16 upstream. In the function l2cap_parse_conf_rsp and in the function l2cap_parse_conf_req the following variable is declared without initialization: struct l2cap_conf_efs efs; In addition, when parsing input configuration parameters in both of these functions, the switch case for handling EFS elements may skip the memcpy call that will write to the efs variable: ... case L2CAP_CONF_EFS: if (olen == sizeof(efs)) memcpy(&efs, (void *)val, olen); ... The olen in the above if is attacker controlled, and regardless of that if, in both of these functions the efs variable would eventually be added to the outgoing configuration request that is being built: l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS, sizeof(efs), (unsigned long) &efs); So by sending a configuration request, or response, that contains an L2CAP_CONF_EFS element, but with an element length that is not sizeof(efs) - the memcpy to the uninitialized efs variable can be avoided, and the uninitialized variable would be returned to the attacker (16 bytes). This issue has been assigned CVE-2017-1000410 Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: Ben Seri <ben@armis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17staging: android: ashmem: fix a race condition in ASHMEM_SET_SIZE ioctlViktor Slavkovic
commit 443064cb0b1fb4569fe0a71209da7625129fb760 upstream. A lock-unlock is missing in ASHMEM_SET_SIZE ioctl which can result in a race condition when mmap is called. After the !asma->file check, before setting asma->size, asma->file can be set in mmap. That would result in having different asma->size than the mapped memory size. Combined with ASHMEM_UNPIN ioctl and shrinker invocation, this can result in memory corruption. Signed-off-by: Viktor Slavkovic <viktors@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17usbip: remove kernel addresses from usb device and urb debug msgsShuah Khan
commit e1346fd87c71a1f61de1fe476ec8df1425ac931c upstream. usbip_dump_usb_device() and usbip_dump_urb() print kernel addresses. Remove kernel addresses from usb device and urb debug msgs and improve the message content. Instead of printing parent device and bus addresses, print parent device and bus names. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17USB: fix usbmon BUG triggerPete Zaitcev
commit 46eb14a6e1585d99c1b9f58d0e7389082a5f466b upstream. Automated tests triggered this by opening usbmon and accessing the mmap while simultaneously resizing the buffers. This bug was with us since 2006, because typically applications only size the buffers once and thus avoid racing. Reported by Kirill A. Shutemov. Reported-by: <syzbot+f9831b881b3e849829fc@syzkaller.appspotmail.com> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17usb: misc: usb3503: make sure reset is low for at least 100usStefan Agner
commit b8626f1dc29d3eee444bfaa92146ec7b291ef41c upstream. When using a GPIO which is high by default, and initialize the driver in USB Hub mode, initialization fails with: [ 111.757794] usb3503 0-0008: SP_ILOCK failed (-5) The reason seems to be that the chip is not properly reset. Probe does initialize reset low, however some lines later the code already set it back high, which is not long enouth. Make sure reset is asserted for at least 100us by inserting a delay after initializing the reset pin during probe. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17USB: serial: cp210x: add new device ID ELV ALC 8xxxChristian Holl
commit d14ac576d10f865970bb1324d337e5e24d79aaf4 upstream. This adds the ELV ALC 8xxx Battery Charging device to the list of USB IDs of drivers/usb/serial/cp210x.c Signed-off-by: Christian Holl <cyborgx1@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQDiego Elio Pettenò
commit 4307413256ac1e09b8f53e8715af3df9e49beec3 upstream. Add IDs for the OneTouch Verio IQ that comes with an embedded USB-to-serial converter. Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17Revert "can: kvaser_usb: free buf in error paths"Greg Kroah-Hartman
This reverts commit 70d9dccf50152b0d7bfb2697d8c51e9fab9f782c which was commit 435019b48033138581a6171093b181fc6b4d3d30 upstream. Jimmy Assarsson asks that it be reverted as it's not correct there. Reported-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASKNicholas Bellinger
commit 1c21a48055a67ceb693e9c2587824a8de60a217c upstream. This patch fixes bug where early se_cmd exceptions that occur before backend execution can result in use-after-free if/when a subsequent ABORT_TASK occurs for the same tag. Since an early se_cmd exception will have had se_cmd added to se_session->sess_cmd_list via target_get_sess_cmd(), it will not have CMD_T_COMPLETE set by the usual target_complete_cmd() backend completion path. This causes a subsequent ABORT_TASK + __target_check_io_state() to signal ABORT_TASK should proceed. As core_tmr_abort_task() executes, it will bring the outstanding se_cmd->cmd_kref count down to zero releasing se_cmd, after se_cmd has already been queued with error status into fabric driver response path code. To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is set at target_get_sess_cmd() time, and cleared immediately before backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE is set. Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to determine when an early exception has occured, and avoid aborting this se_cmd since it will have already been queued into fabric driver response path code. Reported-by: Donald White <dew@datera.io> Cc: Donald White <dew@datera.io> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_krefNicholas Bellinger
commit ae072726f6109bb1c94841d6fb3a82dde298ea85 upstream. Since commit 59b6986dbf fixed a potential NULL pointer dereference by allocating a se_tmr_req for ISCSI_TM_FUNC_TASK_REASSIGN, the se_tmr_req is currently leaked by iscsit_free_cmd() because no iscsi_cmd->se_cmd.se_tfo was associated. To address this, treat ISCSI_TM_FUNC_TASK_REASSIGN like any other TMR and call transport_init_se_cmd() + target_get_sess_cmd() to setup iscsi_cmd->se_cmd.se_tfo with se_cmd->cmd_kref of 2. This will ensure normal release operation once se_cmd->cmd_kref reaches zero and target_release_cmd_kref() is invoked, se_tmr_req will be released via existing target_free_cmd_mem() and core_tmr_release_req() code. Reported-by: Donald White <dew@datera.io> Cc: Donald White <dew@datera.io> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/microcode/intel: Extend BDW late-loading with a revision checkJia Zhang
commit b94b7373317164402ff7728d10f7023127a02b60 upstream. Instead of blacklisting all model 79 CPUs when attempting a late microcode loading, limit that only to CPUs with microcode revisions < 0x0b000021 because only on those late loading may cause a system hang. For such processors either: a) a BIOS update which might contain a newer microcode revision or b) the early microcode loading method should be considered. Processors with revisions 0x0b000021 or higher will not experience such hangs. For more details, see erratum BDF90 in document #334165 (Intel Xeon Processor E7-8800/4800 v4 Product Family Specification Update) from September 2017. [ bp: Heavily massage commit message and pr_* statements. ] Fixes: 723f2828a98c ("x86/microcode/intel: Disable late loading on model 79") Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/1514772287-92959-1-git-send-email-qianyue.zj@alibaba-inc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17crypto: algapi - fix NULL dereference in crypto_remove_spawns()Eric Biggers
commit 9a00674213a3f00394f4e3221b88f2d21fc05789 upstream. syzkaller triggered a NULL pointer dereference in crypto_remove_spawns() via a program that repeatedly and concurrently requests AEADs "authenc(cmac(des3_ede-asm),pcbc-aes-aesni)" and hashes "cmac(des3_ede)" through AF_ALG, where the hashes are requested as "untested" (CRYPTO_ALG_TESTED is set in ->salg_mask but clear in ->salg_feat; this causes the template to be instantiated for every request). Although AF_ALG users really shouldn't be able to request an "untested" algorithm, the NULL pointer dereference is actually caused by a longstanding race condition where crypto_remove_spawns() can encounter an instance which has had spawn(s) "grabbed" but hasn't yet been registered, resulting in ->cra_users still being NULL. We probably should properly initialize ->cra_users earlier, but that would require updating many templates individually. For now just fix the bug in a simple way that can easily be backported: make crypto_remove_spawns() treat a NULL ->cra_users list as empty. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17net: stmmac: enable EEE in MII, GMII or RGMII onlyJerome Brunet
[ Upstream commit 879626e3a52630316d817cbda7cec9a5446d1d82 ] Note in the databook - Section 4.4 - EEE : " The EEE feature is not supported when the MAC is configured to use the TBI, RTBI, SMII, RMII or SGMII single PHY interface. Even if the MAC supports multiple PHY interfaces, you should activate the EEE mode only when the MAC is operating with GMII, MII, or RGMII interface." Applying this restriction solves a stability issue observed on Amlogic gxl platforms operating with RMII interface and the internal PHY. Fixes: 83bf79b6bb64 ("stmmac: disable at run-time the EEE if not supported") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17sh_eth: fix SH7757 GEther initializationSergei Shtylyov
[ Upstream commit 5133550296d43236439494aa955bfb765a89f615 ] Renesas SH7757 has 2 Fast and 2 Gigabit Ether controllers, while the 'sh_eth' driver can only reset and initialize TSU of the first controller pair. Shimoda-san tried to solve that adding the 'needs_init' member to the 'struct sh_eth_plat_data', however the platform code still never sets this flag. I think that we can infer this information from the 'devno' variable (set to 'platform_device::id') and reset/init the Ether controller pair only for an even 'devno'; therefore 'sh_eth_plat_data::needs_init' can be removed... Fixes: 150647fb2c31 ("net: sh_eth: change the condition of initialization") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17sh_eth: fix TSU resource handlingSergei Shtylyov
[ Upstream commit dfe8266b8dd10e12a731c985b725fcf7f0e537f0 ] When switching the driver to the managed device API, I managed to break the case of a dual Ether devices sharing a single TSU: the 2nd Ether port wouldn't probe. Iwamatsu-san has tried to fix this but his patch was buggy and he then dropped the ball... The solution is to limit calling devm_request_mem_region() to the first of the two ports sharing the same TSU, so devm_ioremap_resource() can't be used anymore for the TSU resource... Fixes: d5e07e69218f ("sh_eth: use managed device API") Reported-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17RDS: null pointer dereference in rds_atomic_free_opMohamed Ghannam
[ Upstream commit 7d11f77f84b27cef452cee332f4e469503084737 ] set rm->atomic.op_active to 0 when rds_pin_pages() fails or the user supplied address is invalid, this prevents a NULL pointer usage in rds_atomic_free_op() Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17RDS: Heap OOB write in rds_message_alloc_sgs()Mohamed Ghannam
[ Upstream commit c095508770aebf1b9218e77026e48345d719b17c ] When args->nr_local is 0, nr_pages gets also 0 due some size calculation via rds_rm_size(), which is later used to allocate pages for DMA, this bug produces a heap Out-Of-Bound write access to a specific memory region. Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-178021q: fix a memory leak for VLAN 0 deviceCong Wang
[ Upstream commit 78bbb15f2239bc8e663aa20bbe1987c91a0b75f6 ] A vlan device with vid 0 is allow to creat by not able to be fully cleaned up by unregister_vlan_dev() which checks for vlan_id!=0. Also, VLAN 0 is probably not a valid number and it is kinda "reserved" for HW accelerating devices, but it is probably too late to reject it from creation even if makes sense. Instead, just remove the check in unregister_vlan_dev(). Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: ad1afb003939 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/acpi: Reduce code duplication in mp_override_legacy_irq()Vikas C Sajjan
commit 4ee2ec1b122599f7b10c849fa7915cebb37b7edb upstream. The new function mp_register_ioapic_irq() is a subset of the code in mp_override_legacy_irq(). Replace the code duplication by invoking mp_register_ioapic_irq() from mp_override_legacy_irq(). Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: linux-pm@vger.kernel.org Cc: kkamagui@gmail.com Cc: linux-acpi@vger.kernel.org Link: https://lkml.kernel.org/r/1510848825-21965-3-git-send-email-vikas.cha.sajjan@hpe.com Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17ALSA: aloop: Fix racy hw constraints adjustmentTakashi Iwai
commit 898dfe4687f460ba337a01c11549f87269a13fa2 upstream. The aloop driver tries to update the hw constraints of the connected target on the cable of the opened PCM substream. This is done by adding the extra hw constraints rules referring to the substream runtime->hw fields, while the other substream may update the runtime hw of another side on the fly. This is, however, racy and may result in the inconsistent values when both PCM streams perform the prepare concurrently. One of the reason is that it overwrites the other's runtime->hw field; which is not only racy but also broken when it's called before the open of another side finishes. And, since the reference to runtime->hw isn't protected, the concurrent write may give the partial value update and become inconsistent. This patch is an attempt to fix and clean up: - The prepare doesn't change the runtime->hw of other side any longer, but only update the cable->hw that is referred commonly. - The extra rules refer to the loopback_pcm object instead of the runtime->hw. The actual hw is deduced from cable->hw. - The extra rules take the cable_lock to protect against the race. Fixes: b1c73fc8e697 ("ALSA: snd-aloop: Fix hw_params restrictions and checking") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17ALSA: aloop: Fix inconsistent format due to incomplete ruleTakashi Iwai
commit b088b53e20c7d09b5ab84c5688e609f478e5c417 upstream. The extra hw constraint rule for the formats the aloop driver introduced has a slight flaw, where it doesn't return a positive value when the mask got changed. It came from the fact that it's basically a copy&paste from snd_hw_constraint_mask64(). The original code is supposed to be a single-shot and it modifies the mask bits only once and never after, while what we need for aloop is the dynamic hw rule that limits the mask bits. This difference results in the inconsistent state, as the hw_refine doesn't apply the dependencies fully. The worse and surprisingly result is that it causes a crash in OSS emulation when multiple full-duplex reads/writes are performed concurrently (I leave why it triggers Oops to readers as a homework). For fixing this, replace a few open-codes with the standard snd_mask_*() macros. Reported-by: syzbot+3902b5220e8ca27889ca@syzkaller.appspotmail.com Fixes: b1c73fc8e697 ("ALSA: snd-aloop: Fix hw_params restrictions and checking") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17ALSA: aloop: Release cable upon open error pathTakashi Iwai
commit 9685347aa0a5c2869058ca6ab79fd8e93084a67f upstream. The aloop runtime object and its assignment in the cable are left even when opening a substream fails. This doesn't mean any memory leak, but it still keeps the invalid pointer that may be referred by the another side of the cable spontaneously, which is a potential Oops cause. Clean up the cable assignment and the empty cable upon the error path properly. Fixes: 597603d615d2 ("ALSA: introduce the snd-aloop module for the PCM loopback") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17ALSA: pcm: Allow aborting mutex lock at OSS read/write loopsTakashi Iwai
commit 900498a34a3ac9c611e9b425094c8106bdd7dc1c upstream. PCM OSS read/write loops keep taking the mutex lock for the whole read/write, and this might take very long when the exceptionally high amount of data is given. Also, since it invokes with mutex_lock(), the concurrent read/write becomes unbreakable. This patch tries to address these issues by replacing mutex_lock() with mutex_lock_interruptible(), and also splits / re-takes the lock at each read/write period chunk, so that it can switch the context more finely if requested. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17ALSA: pcm: Abort properly at pending signal in OSS read/write loopsTakashi Iwai
commit 29159a4ed7044c52e3e2cf1a9fb55cec4745c60b upstream. The loops for read and write in PCM OSS emulation have no proper check of pending signals, and they keep processing even after user tries to break. This results in a very long delay, often seen as RCU stall when a huge unprocessed bytes remain queued. The bug could be easily triggered by syzkaller. As a simple workaround, this patch adds the proper check of pending signals and aborts the loop appropriately. Reported-by: syzbot+993cb4cfcbbff3947c21@syzkaller.appspotmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17ALSA: pcm: Add missing error checks in OSS emulation plugin builderTakashi Iwai
commit 6708913750344a900f2e73bfe4a4d6dbbce4fe8d upstream. In the OSS emulation plugin builder where the frame size is parsed in the plugin chain, some places miss the possible errors returned from the plugin src_ or dst_frames callback. This patch papers over such places. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17ALSA: pcm: Remove incorrect snd_BUG_ON() usagesTakashi Iwai
commit fe08f34d066f4404934a509b6806db1a4f700c86 upstream. syzkaller triggered kernel warnings through PCM OSS emulation at closing a stream: WARNING: CPU: 0 PID: 3502 at sound/core/pcm_lib.c:1635 snd_pcm_hw_param_first+0x289/0x690 sound/core/pcm_lib.c:1635 Call Trace: .... snd_pcm_hw_param_near.constprop.27+0x78d/0x9a0 sound/core/oss/pcm_oss.c:457 snd_pcm_oss_change_params+0x17d3/0x3720 sound/core/oss/pcm_oss.c:969 snd_pcm_oss_make_ready+0xaa/0x130 sound/core/oss/pcm_oss.c:1128 snd_pcm_oss_sync+0x257/0x830 sound/core/oss/pcm_oss.c:1638 snd_pcm_oss_release+0x20b/0x280 sound/core/oss/pcm_oss.c:2431 __fput+0x327/0x7e0 fs/file_table.c:210 .... This happens while it tries to open and set up the aloop device concurrently. The warning above (invoked from snd_BUG_ON() macro) is to detect the unexpected logical error where snd_pcm_hw_refine() call shouldn't fail. The theory is true for the case where the hw_params config rules are static. But for an aloop device, the hw_params rule condition does vary dynamically depending on the connected target; when another device is opened and changes the parameters, the device connected in another side is also affected, and it caused the error from snd_pcm_hw_refine(). That is, the simplest "solution" for this is to remove the incorrect assumption of static rules, and treat such an error as a normal error path. As there are a couple of other places using snd_BUG_ON() incorrectly, this patch removes these spurious snd_BUG_ON() calls. Reported-by: syzbot+6f11c7e2a1b91d466432@syzkaller.appspotmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/acpi: Handle SCI interrupts above legacy space gracefullyVikas C Sajjan
commit 252714155f04c5d16989cb3aadb85fd1b5772f99 upstream. Platforms which support only IOAPIC mode, pass the SCI information above the legacy space (0-15) via the FADT mechanism and not via MADT. In such cases mp_override_legacy_irq() which is invoked from acpi_sci_ioapic_setup() to register SCI interrupts fails for interrupts greater equal 16, since it is meant to handle only the legacy space and emits error "Invalid bus_irq %u for legacy override". Add a new function to handle SCI interrupts >= 16 and invoke it conditionally in acpi_sci_ioapic_setup(). The code duplication due to this new function will be cleaned up in a separate patch. Co-developed-by: Sunil V L <sunil.vl@hpe.com> Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com> Signed-off-by: Sunil V L <sunil.vl@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Abdul Lateef Attar <abdul-lateef.attar@hpe.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: linux-pm@vger.kernel.org Cc: kkamagui@gmail.com Cc: linux-acpi@vger.kernel.org Link: https://lkml.kernel.org/r/1510848825-21965-2-git-send-email-vikas.cha.sajjan@hpe.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17kvm: vmx: Scrub hardware GPRs at VM-exitJim Mattson
commit 0cb5b30698fdc8f6b4646012e3acb4ddce430788 upstream. Guest GPR values are live in the hardware GPRs at VM-exit. Do not leave any guest values in hardware GPRs after the guest GPR values are saved to the vcpu_vmx structure. This is a partial mitigation for CVE 2017-5715 and CVE 2017-5753. Specifically, it defeats the Project Zero PoC for CVE 2017-5715. Suggested-by: Eric Northup <digitaleric@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Eric Northup <digitaleric@google.com> Reviewed-by: Benjamin Serebrin <serebrin@google.com> Reviewed-by: Andrew Honig <ahonig@google.com> [Paolo: Add AMD bits, Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' racePeter Zijlstra
commit 321027c1fe77f892f4ea07846aeae08cefbbb290 upstream. Di Shen reported a race between two concurrent sys_perf_event_open() calls where both try and move the same pre-existing software group into a hardware context. The problem is exactly that described in commit: f63a8daa5812 ("perf: Fix event->ctx locking") ... where, while we wait for a ctx->mutex acquisition, the event->ctx relation can have changed under us. That very same commit failed to recognise sys_perf_event_context() as an external access vector to the events and thereby didn't apply the established locking rules correctly. So while one sys_perf_event_open() call is stuck waiting on mutex_lock_double(), the other (which owns said locks) moves the group about. So by the time the former sys_perf_event_open() acquires the locks, the context we've acquired is stale (and possibly dead). Apply the established locking rules as per perf_event_ctx_lock_nested() to the mutex_lock_double() for the 'move_group' case. This obviously means we need to validate state after we acquire the locks. Reported-by: Di Shen (Keen Lab) Tested-by: John Dias <joaodias@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Min Chong <mchong@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: f63a8daa5812 ("perf: Fix event->ctx locking") Link: http://lkml.kernel.org/r/20170106131444.GZ3174@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.16: - Use ACCESS_ONCE() instead of READ_ONCE() - Test perf_event::group_flags instead of group_caps - Add the err_locked cleanup block, which we didn't need before - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17MIPS: Also verify sizeof `elf_fpreg_t' with PTRACE_SETREGSETMaciej W. Rozycki
commit 006501e039eec411842bb3150c41358867d320c2 upstream. Complement commit d614fd58a283 ("mips/ptrace: Preserve previous registers for short regset write") and like with the PTRACE_GETREGSET ptrace(2) request also apply a BUILD_BUG_ON check for the size of the `elf_fpreg_t' type in the PTRACE_SETREGSET request handler. Signed-off-by: Maciej W. Rozycki <macro@mips.com> Fixes: d614fd58a283 ("mips/ptrace: Preserve previous registers for short regset write") Cc: James Hogan <james.hogan@mips.com> Cc: Paul Burton <Paul.Burton@mips.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Dave Martin <Dave.Martin@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17929/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17MIPS: Disallow outsized PTRACE_SETREGSET NT_PRFPREG regset accessesMaciej W. Rozycki
commit c8c5a3a24d395b14447a9a89d61586a913840a3b upstream. Complement commit c23b3d1a5311 ("MIPS: ptrace: Change GP regset to use correct core dump register layout") and also reject outsized PTRACE_SETREGSET requests to the NT_PRFPREG regset, like with the NT_PRSTATUS regset. Signed-off-by: Maciej W. Rozycki <macro@mips.com> Fixes: c23b3d1a5311 ("MIPS: ptrace: Change GP regset to use correct core dump register layout") Cc: James Hogan <james.hogan@mips.com> Cc: Paul Burton <Paul.Burton@mips.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Dave Martin <Dave.Martin@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17930/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17MIPS: Fix an FCSR access API regression with NT_PRFPREG and MSAMaciej W. Rozycki
commit be07a6a1188372b6d19a3307ec33211fc9c9439d upstream. Fix a commit 72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset") public API regression, then activated by commit 1db1af84d6df ("MIPS: Basic MSA context switching support"), that caused the FCSR register not to be read or written for CONFIG_CPU_HAS_MSA kernel configurations (regardless of actual presence or absence of the MSA feature in a given processor) with ptrace(2) PTRACE_GETREGSET and PTRACE_SETREGSET requests nor recorded in core dumps. This is because with !CONFIG_CPU_HAS_MSA configurations the whole of `elf_fpregset_t' array is bulk-copied as it is, which includes the FCSR in one half of the last, 33rd slot, whereas with CONFIG_CPU_HAS_MSA configurations array elements are copied individually, and then only the leading 32 FGR slots while the remaining slot is ignored. Correct the code then such that only FGR slots are copied in the respective !MSA and MSA helpers an then the FCSR slot is handled separately in common code. Use `ptrace_setfcr31' to update the FCSR too, so that the read-only mask is respected. Retrieving a correct value of FCSR is important in debugging not only for the human to be able to get the right interpretation of the situation, but for correct operation of GDB as well. This is because the condition code bits in FSCR are used by GDB to determine the location to place a breakpoint at when single-stepping through an FPU branch instruction. If such a breakpoint is placed incorrectly (i.e. with the condition reversed), then it will be missed, likely causing the debuggee to run away from the control of GDB and consequently breaking the process of investigation. Fortunately GDB continues using the older PTRACE_GETFPREGS ptrace(2) request which is unaffected, so the regression only really hits with post-mortem debug sessions using a core dump file, in which case execution, and consequently single-stepping through branches is not possible. Of course core files created by buggy kernels out there will have the value of FCSR recorded clobbered, but such core files cannot be corrected and the person using them simply will have to be aware that the value of FCSR retrieved is not reliable. Which also means we can likely get away without defining a replacement API which would ensure a correct value of FSCR to be retrieved, or none at all. This is based on previous work by Alex Smith, extensively rewritten. Signed-off-by: Alex Smith <alex@alex-smith.me.uk> Signed-off-by: James Hogan <james.hogan@mips.com> Signed-off-by: Maciej W. Rozycki <macro@mips.com> Fixes: 72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset") Cc: Paul Burton <Paul.Burton@mips.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17928/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17MIPS: Consistently handle buffer counter with PTRACE_SETREGSETMaciej W. Rozycki
commit 80b3ffce0196ea50068885d085ff981e4b8396f4 upstream. Update commit d614fd58a283 ("mips/ptrace: Preserve previous registers for short regset write") bug and consistently consume all data supplied to `fpr_set_msa' with the ptrace(2) PTRACE_SETREGSET request, such that a zero data buffer counter is returned where insufficient data has been given to fill a whole number of FP general registers. In reality this is not going to happen, as the caller is supposed to only supply data covering a whole number of registers and it is verified in `ptrace_regset' and again asserted in `fpr_set', however structuring code such that the presence of trailing partial FP general register data causes `fpr_set_msa' to return with a non-zero data buffer counter makes it appear that this trailing data will be used if there are subsequent writes made to FP registers, which is going to be the case with the FCSR once the missing write to that register has been fixed. Fixes: d614fd58a283 ("mips/ptrace: Preserve previous registers for short regset write") Signed-off-by: Maciej W. Rozycki <macro@mips.com> Cc: James Hogan <james.hogan@mips.com> Cc: Paul Burton <Paul.Burton@mips.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Dave Martin <Dave.Martin@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v4.11+ Patchwork: https://patchwork.linux-mips.org/patch/17927/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17MIPS: Guard against any partial write attempt with PTRACE_SETREGSETMaciej W. Rozycki
commit dc24d0edf33c3e15099688b6bbdf7bdc24bf6e91 upstream. Complement commit d614fd58a283 ("mips/ptrace: Preserve previous registers for short regset write") and ensure that no partial register write attempt is made with PTRACE_SETREGSET, as we do not preinitialize any temporaries used to hold incoming register data and consequently random data could be written. It is the responsibility of the caller, such as `ptrace_regset', to arrange for writes to span whole registers only, so here we only assert that it has indeed happened. Signed-off-by: Maciej W. Rozycki <macro@mips.com> Fixes: 72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset") Cc: James Hogan <james.hogan@mips.com> Cc: Paul Burton <Paul.Burton@mips.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Dave Martin <Dave.Martin@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17926/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17MIPS: Factor out NT_PRFPREG regset access helpersMaciej W. Rozycki
commit a03fe72572c12e98f4173f8a535f32468e48b6ec upstream. In preparation to fix a commit 72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset") FCSR access regression factor out NT_PRFPREG regset access helpers for the non-MSA and the MSA variants respectively, to avoid having to deal with excessive indentation in the actual fix. No functional change, however use `target->thread.fpu.fpr[0]' rather than `target->thread.fpu.fpr[i]' for FGR holding type size determination as there's no `i' variable to refer to anymore, and for the factored out `i' variable declaration use `unsigned int' rather than `unsigned' as its type, following the common style. Signed-off-by: Maciej W. Rozycki <macro@mips.com> Fixes: 72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset") Cc: James Hogan <james.hogan@mips.com> Cc: Paul Burton <Paul.Burton@mips.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Dave Martin <Dave.Martin@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17925/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17IB/srpt: Disable RDMA access by the initiatorBart Van Assche
commit bec40c26041de61162f7be9d2ce548c756ce0f65 upstream. With the SRP protocol all RDMA operations are initiated by the target. Since no RDMA operations are initiated by the initiator, do not grant the initiator permission to submit RDMA reads or writes to the target. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17can: gs_usb: fix return value of the "set_bittiming" callbackWolfgang Grandegger
commit d5b42e6607661b198d8b26a0c30969605b1bf5c7 upstream. The "set_bittiming" callback treats a positive return value as error! For that reason "can_changelink()" will quit silently after setting the bittiming values without processing ctrlmode, restart-ms, etc. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17Input: elantech - add new icbody type 15Aaron Ma
commit 10d900303f1c3a821eb0bef4e7b7ece16768fba4 upstream. The touchpad of Lenovo Thinkpad L480 reports it's version as 15. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17kernel/signal.c: remove the no longer needed SIGNAL_UNKILLABLE check in ↵Oleg Nesterov
complete_signal() commit 426915796ccaf9c2bd9bb06dc5702225957bc2e5 upstream. complete_signal() checks SIGNAL_UNKILLABLE before it starts to destroy the thread group, today this is wrong in many ways. If nothing else, fatal_signal_pending() should always imply that the whole thread group (except ->group_exit_task if it is not NULL) is killed, this check breaks the rule. After the previous changes we can rely on sig_task_ignored(); sig_fatal(sig) && SIGNAL_UNKILLABLE can only be true if we actually want to kill this task and sig == SIGKILL OR it is traced and debugger can intercept the signal. This should hopefully fix the problem reported by Dmitry. This test-case static int init(void *arg) { for (;;) pause(); } int main(void) { char stack[16 * 1024]; for (;;) { int pid = clone(init, stack + sizeof(stack)/2, CLONE_NEWPID | SIGCHLD, NULL); assert(pid > 0); assert(ptrace(PTRACE_ATTACH, pid, 0, 0) == 0); assert(waitpid(-1, NULL, WSTOPPED) == pid); assert(ptrace(PTRACE_DETACH, pid, 0, SIGSTOP) == 0); assert(syscall(__NR_tkill, pid, SIGKILL) == 0); assert(pid == wait(NULL)); } } triggers the WARN_ON_ONCE(!(task->jobctl & JOBCTL_STOP_PENDING)) in task_participate_group_stop(). do_signal_stop()->signal_group_exit() checks SIGNAL_GROUP_EXIT and return false, but task_set_jobctl_pending() checks fatal_signal_pending() and does not set JOBCTL_STOP_PENDING. And his should fix the minor security problem reported by Kyle, SECCOMP_RET_TRACE can miss fatal_signal_pending() the same way if the task is the root of a pid namespace. Link: http://lkml.kernel.org/r/20171103184246.GD21036@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Kyle Huey <me@kylehuey.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17kernel/signal.c: protect the SIGNAL_UNKILLABLE tasks from !sig_kernel_only() ↵Oleg Nesterov
signals commit ac25385089f673560867eb5179228a44ade0cfc1 upstream. Change sig_task_ignored() to drop the SIG_DFL && !sig_kernel_only() signals even if force == T. This simplifies the next change and this matches the same check in get_signal() which will drop these signals anyway. Link: http://lkml.kernel.org/r/20171103184227.GC21036@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17kernel/signal.c: protect the traced SIGNAL_UNKILLABLE tasks from SIGKILLOleg Nesterov
commit 628c1bcba204052d19b686b5bac149a644cdb72e upstream. The comment in sig_ignored() says "Tracers may want to know about even ignored signals" but SIGKILL can not be reported to debugger and it is just wrong to return 0 in this case: SIGKILL should only kill the SIGNAL_UNKILLABLE task if it comes from the parent ns. Change sig_ignored() to ignore ->ptrace if sig == SIGKILL and rely on sig_task_ignored(). SISGTOP coming from within the namespace is not really right too but at least debugger can intercept it, and we can't drop it here because this will break "gdb -p 1": ptrace_attach() won't work. Perhaps we will add another ->ptrace check later, we will see. Link: http://lkml.kernel.org/r/20171103184206.GB21036@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17fscache: Fix the default for fscache_maybe_release_page()David Howells
commit 98801506552593c9b8ac11021b0cdad12cab4f6b upstream. Fix the default for fscache_maybe_release_page() for when the cookie isn't valid or the page isn't cached. It mustn't return false as that indicates the page cannot yet be freed. The problem with the default is that if, say, there's no cache, but a network filesystem's pages are using up almost all the available memory, a system can OOM because the filesystem ->releasepage() op will not allow them to be released as fscache_maybe_release_page() incorrectly prevents it. This can be tested by writing a sequence of 512MiB files to an AFS mount. It does not affect NFS or CIFS because both of those wrap the call in a check of PG_fscache and it shouldn't bother Ceph as that only has PG_private set whilst writeback is in progress. This might be an issue for 9P, however. Note that the pages aren't entirely stuck. Removing a file or unmounting will clear things because that uses ->invalidatepage() instead. Fixes: 201a15428bd5 ("FS-Cache: Handle pages pending storage that get evicted under OOM conditions") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17crypto: n2 - cure use after freeJan Engelhardt
commit 203f45003a3d03eea8fa28d74cfc74c354416fdb upstream. queue_cache_init is first called for the Control Word Queue (n2_crypto_probe). At that time, queue_cache[0] is NULL and a new kmem_cache will be allocated. If the subsequent n2_register_algs call fails, the kmem_cache will be released in queue_cache_destroy, but queue_cache_init[0] is not set back to NULL. So when the Module Arithmetic Unit gets probed next (n2_mau_probe), queue_cache_init will not allocate a kmem_cache again, but leave it as its bogus value, causing a BUG() to trigger when queue_cache[0] is eventually passed to kmem_cache_zalloc: n2_crypto: Found N2CP at /virtual-devices@100/n2cp@7 n2_crypto: Registered NCS HVAPI version 2.0 called queue_cache_init n2_crypto: md5 alg registration failed n2cp f028687c: /virtual-devices@100/n2cp@7: Unable to register algorithms. called queue_cache_destroy n2cp: probe of f028687c failed with error -22 n2_crypto: Found NCP at /virtual-devices@100/ncp@6 n2_crypto: Registered NCS HVAPI version 2.0 called queue_cache_init kernel BUG at mm/slab.c:2993! Call Trace: [0000000000604488] kmem_cache_alloc+0x1a8/0x1e0 (inlined) kmem_cache_zalloc (inlined) new_queue (inlined) spu_queue_setup (inlined) handle_exec_unit [0000000010c61eb4] spu_mdesc_scan+0x1f4/0x460 [n2_crypto] [0000000010c62b80] n2_mau_probe+0x100/0x220 [n2_crypto] [000000000084b174] platform_drv_probe+0x34/0xc0 Signed-off-by: Jan Engelhardt <jengelh@inai.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17kernel/acct.c: fix the acct->needcheck check in check_free_space()Oleg Nesterov
commit 4d9570158b6260f449e317a5f9ed030c2504a615 upstream. As Tsukada explains, the time_is_before_jiffies(acct->needcheck) check is very wrong, we need time_is_after_jiffies() to make sys_acct() work. Ignoring the overflows, the code should "goto out" if needcheck > jiffies, while currently it checks "needcheck < jiffies" and thus in the likely case check_free_space() does nothing until jiffies overflow. In particular this means that sys_acct() is simply broken, acct_on() sets acct->needcheck = jiffies and expects that check_free_space() should set acct->active = 1 after the free-space check, but this won't happen if jiffies increments in between. This was broken by commit 32dc73086015 ("get rid of timer in kern/acct.c") in 2011, then another (correct) commit 795a2f22a8ea ("acct() should honour the limits from the very beginning") made the problem more visible. Link: http://lkml.kernel.org/r/20171213133940.GA6554@redhat.com Fixes: 32dc73086015 ("get rid of timer in kern/acct.c") Reported-by: TSUKADA Koutaro <tsukada@ascade.co.jp> Suggested-by: TSUKADA Koutaro <tsukada@ascade.co.jp> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02Linux 3.18.91v3.18.91Greg Kroah-Hartman
2018-01-02n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)Linus Torvalds
commit 966031f340185eddd05affcf72b740549f056348 upstream. We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") and the intent was to allow it to override some (all?) ICANON behavior. Quoting from that original commit message: There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. but the problem turns out that "several aspects of the terminal driver are disabled" is a bit ambiguous, and you can really confuse the n_tty layer by setting EXTPROC and then causing some of the ICANON invariants to no longer be maintained. This fixes at least one such case (TIOCINQ) becoming unhappy because of the confusion over whether ICANON really means ICANON when EXTPROC is set. This basically makes TIOCINQ match the case of read: if EXTPROC is set, we ignore ICANON. Also, make sure to reset the ICANON state ie EXTPROC changes, not just if ICANON changes. Fixes: 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by: syzkaller <syzkaller@googlegroups.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201Daniel Thompson
commit da99706689481717998d1d48edd389f339eea979 upstream. When plugging in a USB webcam I see the following message: xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? handle_tx_event: 913 callbacks suppressed All is quiet again with this patch (and I've done a fair but of soak testing with the camera since). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-04 11:06:59 +0000