diff options
63 files changed, 1800 insertions, 1722 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 431c3753145a..261fdd085bb9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1,59 +1,58 @@ config ARM bool default y + select ARCH_BINFMT_ELF_RANDOMIZE_PIE + select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAVE_CUSTOM_GPIO_H - select HAVE_AOUT - select HAVE_DMA_API_DEBUG - select HAVE_IDE if PCI || ISA || PCMCIA - select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if MMU - select HAVE_MEMBLOCK - select RTC_LIB - select SYS_SUPPORTS_APM_EMULATION + select ARCH_WANT_IPC_PARSE_VERSION + select CPU_PM if (SUSPEND || CPU_IDLE) + select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) - select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE - select HAVE_OPROFILE if (HAVE_PERF_EVENTS) + select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select GENERIC_IRQ_PROBE + select GENERIC_IRQ_SHOW + select GENERIC_KERNEL_THREAD + select GENERIC_KERNEL_EXECVE + select GENERIC_PCI_IOMAP + select GENERIC_SMP_IDLE_THREAD + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER + select HARDIRQS_SW_RESEND + select HAVE_AOUT select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK - select HAVE_SYSCALL_TRACEPOINTS - select HAVE_KPROBES if !XIP_KERNEL - select HAVE_KRETPROBES if (HAVE_KPROBES) - select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) - select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) + select HAVE_BPF_JIT + select HAVE_C_RECORDMCOUNT + select HAVE_DEBUG_KMEMLEAK + select HAVE_DMA_API_DEBUG + select HAVE_DMA_ATTRS + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) + select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) - select ARCH_BINFMT_ELF_RANDOMIZE_PIE + select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_GENERIC_DMA_COHERENT - select HAVE_DEBUG_KMEMLEAK + select HAVE_GENERIC_HARDIRQS + select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) + select HAVE_IDE if PCI || ISA || PCMCIA + select HAVE_IRQ_WORK select HAVE_KERNEL_GZIP - select HAVE_KERNEL_LZO select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO select HAVE_KERNEL_XZ - select HAVE_IRQ_WORK + select HAVE_KPROBES if !XIP_KERNEL + select HAVE_KRETPROBES if (HAVE_KPROBES) + select HAVE_MEMBLOCK + select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_PERF_EVENTS - select PERF_USE_VMALLOC select HAVE_REGS_AND_STACK_ACCESS_API - select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) - select HAVE_C_RECORDMCOUNT - select HAVE_GENERIC_HARDIRQS - select HARDIRQS_SW_RESEND - select GENERIC_IRQ_PROBE - select GENERIC_IRQ_SHOW + select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 - select ARCH_WANT_IPC_PARSE_VERSION - select HARDIRQS_SW_RESEND - select CPU_PM if (SUSPEND || CPU_IDLE) - select GENERIC_PCI_IOMAP - select HAVE_BPF_JIT - select GENERIC_SMP_IDLE_THREAD select KTIME_SCALAR - select GENERIC_CLOCKEVENTS_BROADCAST if SMP - select GENERIC_STRNCPY_FROM_USER - select GENERIC_STRNLEN_USER - select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN - select GENERIC_KERNEL_THREAD - select GENERIC_KERNEL_EXECVE + select PERF_USE_VMALLOC + select RTC_LIB + select SYS_SUPPORTS_APM_EMULATION help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -69,9 +68,9 @@ config NEED_SG_DMA_LENGTH bool config ARM_DMA_USE_IOMMU - select NEED_SG_DMA_LENGTH - select ARM_HAS_SG_CHAIN bool + select ARM_HAS_SG_CHAIN + select NEED_SG_DMA_LENGTH config HAVE_PWM bool @@ -263,69 +262,69 @@ choice config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" + depends on MMU select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR select COMMON_CLK select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF - depends on MMU config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" - select ARM_AMBA select ARCH_HAS_CPUFREQ + select ARM_AMBA select COMMON_CLK select COMMON_CLK_VERSATILE + select GENERIC_CLOCKEVENTS select HAVE_TCM select ICST - select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select NEED_MACH_MEMORY_H select PLAT_VERSATILE select PLAT_VERSATILE_FPGA_IRQ - select NEED_MACH_MEMORY_H select SPARSE_IRQ - select MULTI_IRQ_HANDLER help Support for ARM's Integrator platform. config ARCH_REALVIEW bool "ARM Ltd. RealView family" + select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA + select ARM_TIMER_SP804 select COMMON_CLK select COMMON_CLK_VERSATILE - select ICST select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB - select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD - select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB + select ICST select NEED_MACH_MEMORY_H + select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD help This enables support for ARM Ltd RealView boards. config ARCH_VERSATILE bool "ARM Ltd. Versatile family" + select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA + select ARM_TIMER_SP804 select ARM_VIC select CLKDEV_LOOKUP + select GENERIC_CLOCKEVENTS select HAVE_MACH_CLKDEV select ICST - select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE - select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_FPGA_IRQ - select ARM_TIMER_SP804 help This enables support for ARM Ltd Versatile board. config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK select CLKDEV_LOOKUP + select HAVE_CLK select IRQ_DOMAIN select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD @@ -350,43 +349,43 @@ config ARCH_BCM2835 This enables support for the Broadcom BCM2835 SoC. This SoC is use in the Raspberry Pi, and Roku 2 devices. -config ARCH_CLPS711X - bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" - select CPU_ARM720T - select ARCH_USES_GETTIMEOFFSET - select COMMON_CLK - select CLKDEV_LOOKUP - select NEED_MACH_MEMORY_H - help - Support for Cirrus Logic 711x/721x/731x based boards. - config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" + select ARM_GIC select CPU_V6K select GENERIC_CLOCKEVENTS - select ARM_GIC select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help Support for Cavium Networks CNS3XXX platform. +config ARCH_CLPS711X + bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" + select ARCH_USES_GETTIMEOFFSET + select CLKDEV_LOOKUP + select COMMON_CLK + select CPU_ARM720T + select NEED_MACH_MEMORY_H + help + Support for Cirrus Logic 711x/721x/731x based boards. + config ARCH_GEMINI bool "Cortina Systems Gemini" - select CPU_FA526 select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET + select CPU_FA526 help Support for the Cortina Systems Gemini family SoCs config ARCH_SIRF bool "CSR SiRF" - select NO_IOPORT select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS select COMMON_CLK + select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MIGHT_HAVE_CACHE_L2X0 + select NO_IOPORT select PINCTRL select PINCTRL_SIRF select USE_OF @@ -395,12 +394,12 @@ config ARCH_SIRF config ARCH_EBSA110 bool "EBSA-110" + select ARCH_USES_GETTIMEOFFSET select CPU_SA110 select ISA - select NO_IOPORT - select ARCH_USES_GETTIMEOFFSET select NEED_MACH_IO_H select NEED_MACH_MEMORY_H + select NO_IOPORT help This is an evaluation board for the StrongARM processor available from Digital. It has limited hardware on-board, including an @@ -409,13 +408,13 @@ config ARCH_EBSA110 config ARCH_EP93XX bool "EP93xx-based" - select CPU_ARM920T + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET select ARM_AMBA select ARM_VIC select CLKDEV_LOOKUP - select ARCH_REQUIRE_GPIOLIB - select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_USES_GETTIMEOFFSET + select CPU_ARM920T select NEED_MACH_MEMORY_H help This enables support for the Cirrus EP93xx series of CPUs. @@ -434,10 +433,10 @@ config ARCH_FOOTBRIDGE config ARCH_MXC bool "Freescale MXC/iMX-based" - select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MULTI_IRQ_HANDLER select SPARSE_IRQ @@ -447,11 +446,11 @@ config ARCH_MXC config ARCH_MXS bool "Freescale MXS-based" - select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO select COMMON_CLK + select GENERIC_CLOCKEVENTS select HAVE_CLK_PREPARE select MULTI_IRQ_HANDLER select PINCTRL @@ -462,43 +461,43 @@ config ARCH_MXS config ARCH_NETX bool "Hilscher NetX based" + select ARM_VIC select CLKSRC_MMIO select CPU_ARM926T - select ARM_VIC select GENERIC_CLOCKEVENTS help This enables support for systems based on the Hilscher NetX Soc config ARCH_H720X bool "Hynix HMS720x-based" + select ARCH_USES_GETTIMEOFFSET select CPU_ARM720T select ISA_DMA_API - select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Hynix HMS720x config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU - select CPU_XSC3 - select PLAT_IOP - select PCI select ARCH_SUPPORTS_MSI - select VMSPLIT_1G + select CPU_XSC3 select NEED_MACH_MEMORY_H select NEED_RET_TO_USER + select PCI + select PLAT_IOP + select VMSPLIT_1G help Support for Intel's IOP13XX (XScale) family of processors. config ARCH_IOP32X bool "IOP32x-based" depends on MMU + select ARCH_REQUIRE_GPIOLIB select CPU_XSCALE select NEED_MACH_GPIO_H select NEED_RET_TO_USER - select PLAT_IOP select PCI - select ARCH_REQUIRE_GPIOLIB + select PLAT_IOP help Support for Intel's 80219 and IOP32X (XScale) family of processors. @@ -506,12 +505,12 @@ config ARCH_IOP32X config ARCH_IOP33X bool "IOP33x-based" depends on MMU + select ARCH_REQUIRE_GPIOLIB select CPU_XSCALE select NEED_MACH_GPIO_H select NEED_RET_TO_USER - select PLAT_IOP select PCI - select ARCH_REQUIRE_GPIOLIB + select PLAT_IOP help Support for Intel's IOP33X (XScale) family of processors. @@ -519,20 +518,20 @@ config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU select ARCH_HAS_DMA_SET_COHERENT_MASK + select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CPU_XSCALE - select ARCH_REQUIRE_GPIOLIB + select DMABOUNCE if PCI select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select NEED_MACH_IO_H - select DMABOUNCE if PCI help Support for Intel's IXP4XX (XScale) family of processors. config ARCH_DOVE bool "Marvell Dove" - select CPU_V7 select ARCH_REQUIRE_GPIOLIB + select CPU_V7 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select PLAT_ORION_LEGACY @@ -542,36 +541,21 @@ config ARCH_DOVE config ARCH_KIRKWOOD bool "Marvell Kirkwood" - select CPU_FEROCEON - select PCI select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON select GENERIC_CLOCKEVENTS + select PCI select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. -config ARCH_LPC32XX - bool "NXP LPC32XX" - select CLKSRC_MMIO - select CPU_ARM926T - select ARCH_REQUIRE_GPIOLIB - select HAVE_IDE - select ARM_AMBA - select USB_ARCH_HAS_OHCI - select CLKDEV_LOOKUP - select GENERIC_CLOCKEVENTS - select USE_OF - select HAVE_PWM - help - Support for the NXP LPC32XX family of processors - config ARCH_MV78XX0 bool "Marvell MV78xx0" - select CPU_FEROCEON - select PCI select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON select GENERIC_CLOCKEVENTS + select PCI select PLAT_ORION_LEGACY help Support for the following Marvell MV78xx0 series SoCs: @@ -580,10 +564,10 @@ config ARCH_MV78XX0 config ARCH_ORION5X bool "Marvell Orion" depends on MMU - select CPU_FEROCEON - select PCI select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON select GENERIC_CLOCKEVENTS + select PCI select PLAT_ORION_LEGACY help Support for the following Marvell Orion 5x series SoCs: @@ -595,33 +579,33 @@ config ARCH_MMP depends on MMU select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GPIO_PXA select IRQ_DOMAIN + select NEED_MACH_GPIO_H select PLAT_PXA select SPARSE_IRQ - select GENERIC_ALLOCATOR - select NEED_MACH_GPIO_H help Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. config ARCH_KS8695 bool "Micrel/Kendin KS8695" - select CPU_ARM922T select ARCH_REQUIRE_GPIOLIB - select NEED_MACH_MEMORY_H select CLKSRC_MMIO + select CPU_ARM922T select GENERIC_CLOCKEVENTS + select NEED_MACH_MEMORY_H help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. config ARCH_W90X900 bool "Nuvoton W90X900 CPU" - select CPU_ARM926T select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select CPU_ARM926T select GENERIC_CLOCKEVENTS help Support for Nuvoton (Winbond logic dept.) ARM9 processor, @@ -632,18 +616,33 @@ config ARCH_W90X900 <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> +config ARCH_LPC32XX + bool "NXP LPC32XX" + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + select HAVE_IDE + select HAVE_PWM + select USB_ARCH_HAS_OHCI + select USE_OF + help + Support for the NXP LPC32XX family of processors + config ARCH_TEGRA bool "NVIDIA Tegra" + select ARCH_HAS_CPUFREQ select CLKDEV_LOOKUP select CLKSRC_MMIO + select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 - select ARCH_HAS_CPUFREQ select USE_OF - select COMMON_CLK help This enables support for NVIDIA Tegra based systems (Tegra APX, Tegra 6xx and Tegra 2 series). @@ -651,29 +650,29 @@ config ARCH_TEGRA config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU - select ARCH_MTD_XIP select ARCH_HAS_CPUFREQ + select ARCH_MTD_XIP + select ARCH_REQUIRE_GPIOLIB + select ARM_CPU_SUSPEND if PM + select AUTO_ZRELADDR select CLKDEV_LOOKUP select CLKSRC_MMIO - select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select GPIO_PXA - select PLAT_PXA - select SPARSE_IRQ - select AUTO_ZRELADDR - select MULTI_IRQ_HANDLER - select ARM_CPU_SUSPEND if PM select HAVE_IDE + select MULTI_IRQ_HANDLER select NEED_MACH_GPIO_H + select PLAT_PXA + select SPARSE_IRQ help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. config ARCH_MSM bool "Qualcomm MSM" - select HAVE_CLK - select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select GENERIC_CLOCKEVENTS + select HAVE_CLK help Support for Qualcomm MSM/QSD based systems. This runs on the apps processor of the MSM/QSD and depends on a shared memory @@ -683,50 +682,50 @@ config ARCH_MSM config ARCH_SHMOBILE bool "Renesas SH-Mobile / R-Mobile" - select HAVE_CLK select CLKDEV_LOOKUP + select GENERIC_CLOCKEVENTS + select HAVE_CLK select HAVE_MACH_CLKDEV select HAVE_SMP - select GENERIC_CLOCKEVENTS select MIGHT_HAVE_CACHE_L2X0 - select NO_IOPORT - select SPARSE_IRQ select MULTI_IRQ_HANDLER - select PM_GENERIC_DOMAINS if PM select NEED_MACH_MEMORY_H + select NO_IOPORT + select PM_GENERIC_DOMAINS if PM + select SPARSE_IRQ help Support for Renesas's SH-Mobile and R-Mobile ARM platforms. config ARCH_RPC bool "RiscPC" select ARCH_ACORN - select FIQ select ARCH_MAY_HAVE_PC_FDC - select HAVE_PATA_PLATFORM - select ISA_DMA_API - select NO_IOPORT select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET + select FIQ select HAVE_IDE + select HAVE_PATA_PLATFORM + select ISA_DMA_API select NEED_MACH_IO_H select NEED_MACH_MEMORY_H + select NO_IOPORT help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. config ARCH_SA1100 bool "SA1100-based" - select CLKSRC_MMIO - select CPU_SA1100 - select ISA - select ARCH_SPARSEMEM_ENABLE - select ARCH_MTD_XIP select ARCH_HAS_CPUFREQ + select ARCH_MTD_XIP + select ARCH_REQUIRE_GPIOLIB + select ARCH_SPARSEMEM_ENABLE + select CLKDEV_LOOKUP + select CLKSRC_MMIO select CPU_FREQ + select CPU_SA1100 select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP - select ARCH_REQUIRE_GPIOLIB select HAVE_IDE + select ISA select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H select SPARSE_IRQ @@ -735,14 +734,14 @@ config ARCH_SA1100 config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" - select GENERIC_GPIO select ARCH_HAS_CPUFREQ - select HAVE_CLK - select CLKDEV_LOOKUP select ARCH_USES_GETTIMEOFFSET + select CLKDEV_LOOKUP + select GENERIC_GPIO + select HAVE_CLK select HAVE_S3C2410_I2C if I2C - select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select NEED_MACH_IO_H help @@ -753,38 +752,38 @@ config ARCH_S3C24XX config ARCH_S3C64XX bool "Samsung S3C64XX" - select PLAT_SAMSUNG - select CPU_V6 + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET select ARM_VIC + select CLKDEV_LOOKUP + select CPU_V6 select HAVE_CLK + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_TCM - select CLKDEV_LOOKUP + select NEED_MACH_GPIO_H select NO_IOPORT - select ARCH_USES_GETTIMEOFFSET - select ARCH_HAS_CPUFREQ - select ARCH_REQUIRE_GPIOLIB + select PLAT_SAMSUNG + select S3C_DEV_NAND + select S3C_GPIO_TRACK select SAMSUNG_CLKSRC + select SAMSUNG_GPIOLIB_4BIT select SAMSUNG_IRQ_VIC_TIMER - select S3C_GPIO_TRACK - select S3C_DEV_NAND select USB_ARCH_HAS_OHCI - select SAMSUNG_GPIOLIB_4BIT - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select NEED_MACH_GPIO_H help Samsung S3C64XX series based systems config ARCH_S5P64X0 bool "Samsung S5P6440 S5P6450" - select CPU_V6 - select GENERIC_GPIO - select HAVE_CLK select CLKDEV_LOOKUP select CLKSRC_MMIO - select HAVE_S3C2410_WATCHDOG if WATCHDOG + select CPU_V6 select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select HAVE_CLK select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H help @@ -793,50 +792,50 @@ config ARCH_S5P64X0 config ARCH_S5PC100 bool "Samsung S5PC100" - select GENERIC_GPIO - select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP select CPU_V7 - select ARCH_USES_GETTIMEOFFSET + select GENERIC_GPIO + select HAVE_CLK select HAVE_S3C2410_I2C if I2C - select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H help Samsung S5PC100 series based systems config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" - select CPU_V7 - select ARCH_SPARSEMEM_ENABLE + select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL - select GENERIC_GPIO - select HAVE_CLK + select ARCH_SPARSEMEM_ENABLE select CLKDEV_LOOKUP select CLKSRC_MMIO - select ARCH_HAS_CPUFREQ + select CPU_V7 select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select HAVE_CLK select HAVE_S3C2410_I2C if I2C - select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H help Samsung S5PV210/S5PC110 series based systems config ARCH_EXYNOS - bool "SAMSUNG EXYNOS" - select CPU_V7 - select ARCH_SPARSEMEM_ENABLE + bool "Samsung EXYNOS" + select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL - select GENERIC_GPIO - select HAVE_CLK + select ARCH_SPARSEMEM_ENABLE select CLKDEV_LOOKUP - select ARCH_HAS_CPUFREQ + select CPU_V7 select GENERIC_CLOCKEVENTS - select HAVE_S3C_RTC if RTC_CLASS + select GENERIC_GPIO + select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H help @@ -844,13 +843,13 @@ config ARCH_EXYNOS config ARCH_SHARK bool "Shark" + select ARCH_USES_GETTIMEOFFSET select CPU_SA110 select ISA select ISA_DMA - select ZONE_DMA - select PCI - select ARCH_USES_GETTIMEOFFSET select NEED_MACH_MEMORY_H + select PCI + select ZONE_DMA help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). @@ -858,17 +857,17 @@ config ARCH_SHARK config ARCH_U300 bool "ST-Ericsson U300 Series" depends on MMU - select CLKSRC_MMIO - select CPU_ARM926T - select HAVE_TCM + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_PATCH_PHYS_VIRT select ARM_VIC - select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP + select CLKSRC_MMIO select COMMON_CLK + select CPU_ARM926T + select GENERIC_CLOCKEVENTS select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB + select HAVE_TCM select SPARSE_IRQ help Support for ST-Ericsson U300 series mobile platforms. @@ -876,12 +875,12 @@ config ARCH_U300 config ARCH_U8500 bool "ST-Ericsson U8500 Series" depends on MMU - select CPU_V7 + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA - select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP - select ARCH_REQUIRE_GPIOLIB - select ARCH_HAS_CPUFREQ + select CPU_V7 + select GENERIC_CLOCKEVENTS select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help @@ -889,78 +888,78 @@ config ARCH_U8500 config ARCH_NOMADIK bool "STMicroelectronics Nomadik" + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC - select CPU_ARM926T select COMMON_CLK + select CPU_ARM926T select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_STN8815 - select MIGHT_HAVE_CACHE_L2X0 - select ARCH_REQUIRE_GPIOLIB help Support for the Nomadik platform by ST-Ericsson +config PLAT_SPEAR + bool "ST SPEAr" + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select HAVE_CLK + help + Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). + config ARCH_DAVINCI bool "TI DaVinci" - select GENERIC_CLOCKEVENTS + select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_REQUIRE_GPIOLIB - select ZONE_DMA - select HAVE_IDE select CLKDEV_LOOKUP select GENERIC_ALLOCATOR + select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select ARCH_HAS_HOLES_MEMORYMODEL + select HAVE_IDE select NEED_MACH_GPIO_H + select ZONE_DMA help Support for TI's DaVinci platform. config ARCH_OMAP bool "TI OMAP" depends on MMU - select HAVE_CLK - select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ - select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS select ARCH_HAS_HOLES_MEMORYMODEL - select NEED_MACH_GPIO_H - help - Support for TI's OMAP platform (OMAP1/2/3/4). - -config PLAT_SPEAR - bool "ST SPEAr" - select ARM_AMBA select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select COMMON_CLK select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK + select NEED_MACH_GPIO_H help - Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). + Support for TI's OMAP platform (OMAP1/2/3/4). config ARCH_VT8500 bool "VIA/WonderMedia 85xx" - select CPU_ARM926T - select GENERIC_GPIO select ARCH_HAS_CPUFREQ - select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB - select USE_OF + select CLKDEV_LOOKUP select COMMON_CLK + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO select HAVE_CLK - select CLKDEV_LOOKUP + select USE_OF help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" + select ARM_AMBA + select ARM_GIC + select CLKDEV_LOOKUP select CPU_V7 select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP - select ARM_GIC - select ARM_AMBA select ICST select MIGHT_HAVE_CACHE_L2X0 select USE_OF @@ -975,33 +974,33 @@ comment "CPU Core family selection" config ARCH_MULTI_V4 bool "ARMv4 based platforms (FA526, StrongARM)" - select ARCH_MULTI_V4_V5 depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 config ARCH_MULTI_V4T bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" - select ARCH_MULTI_V4_V5 depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 config ARCH_MULTI_V5 bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" - select ARCH_MULTI_V4_V5 depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 config ARCH_MULTI_V4_V5 bool config ARCH_MULTI_V6 bool "ARMv6 based platforms (ARM11, Scorpion, ...)" - select CPU_V6 select ARCH_MULTI_V6_V7 + select CPU_V6 config ARCH_MULTI_V7 bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)" - select CPU_V7 - select ARCH_VEXPRESS default y select ARCH_MULTI_V6_V7 + select ARCH_VEXPRESS + select CPU_V7 config ARCH_MULTI_V6_V7 bool @@ -1138,9 +1137,9 @@ config PLAT_IOP config PLAT_ORION bool select CLKSRC_MMIO + select COMMON_CLK select GENERIC_IRQ_CHIP select IRQ_DOMAIN - select COMMON_CLK config PLAT_ORION_LEGACY bool @@ -1498,8 +1497,8 @@ config SMP depends on GENERIC_CLOCKEVENTS depends on HAVE_SMP depends on MMU - select USE_GENERIC_SMP_HELPERS select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP + select USE_GENERIC_SMP_HELPERS help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1858,9 +1857,9 @@ menu "Boot options" config USE_OF bool "Flattened Device Tree support" + select IRQ_DOMAIN select OF select OF_EARLY_FLATTREE - select IRQ_DOMAIN help Include support for flattened device tree machine descriptions. @@ -2142,8 +2141,8 @@ config CPU_FREQ_PXA bool depends on CPU_FREQ && ARCH_PXA && PXA25x default y - select CPU_FREQ_TABLE select CPU_FREQ_DEFAULT_GOV_USERSPACE + select CPU_FREQ_TABLE config CPU_FREQ_S3C bool diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 283fa1d804f4..45ceeb0e93e0 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -1,15 +1,15 @@ config ARM_GIC + bool select IRQ_DOMAIN select MULTI_IRQ_HANDLER - bool config GIC_NON_BANKED bool config ARM_VIC + bool select IRQ_DOMAIN select MULTI_IRQ_HANDLER - bool config ARM_VIC_NR int diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 8a7196ca5106..f70ae175a3d6 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,6 +1,4 @@ -include include/asm-generic/Kbuild.asm -header-y += hwcap.h generic-y += auxvec.h generic-y += bitsperlong.h diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h index 917626128a1d..6ff56eca3f1f 100644 --- a/arch/arm/include/asm/hwcap.h +++ b/arch/arm/include/asm/hwcap.h @@ -1,31 +1,8 @@ #ifndef __ASMARM_HWCAP_H #define __ASMARM_HWCAP_H -/* - * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP - */ -#define HWCAP_SWP (1 << 0) -#define HWCAP_HALF (1 << 1) -#define HWCAP_THUMB (1 << 2) -#define HWCAP_26BIT (1 << 3) /* Play it safe */ -#define HWCAP_FAST_MULT (1 << 4) -#define HWCAP_FPA (1 << 5) -#define HWCAP_VFP (1 << 6) -#define HWCAP_EDSP (1 << 7) -#define HWCAP_JAVA (1 << 8) -#define HWCAP_IWMMXT (1 << 9) -#define HWCAP_CRUNCH (1 << 10) -#define HWCAP_THUMBEE (1 << 11) -#define HWCAP_NEON (1 << 12) -#define HWCAP_VFPv3 (1 << 13) -#define HWCAP_VFPv3D16 (1 << 14) -#define HWCAP_TLS (1 << 15) -#define HWCAP_VFPv4 (1 << 16) -#define HWCAP_IDIVA (1 << 17) -#define HWCAP_IDIVT (1 << 18) -#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT) +#include <uapi/asm/hwcap.h> -#if defined(__KERNEL__) #if !defined(__ASSEMBLY__) /* * This yields a mask that user programs can use to figure out what @@ -35,5 +12,3 @@ extern unsigned int elf_hwcap; #endif #endif - -#endif diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 142d6ae41231..3d52ee1bfb31 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -10,133 +10,12 @@ #ifndef __ASM_ARM_PTRACE_H #define __ASM_ARM_PTRACE_H -#include <asm/hwcap.h> - -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 -/* PTRACE_ATTACH is 16 */ -/* PTRACE_DETACH is 17 */ -#define PTRACE_GETWMMXREGS 18 -#define PTRACE_SETWMMXREGS 19 -/* 20 is unused */ -#define PTRACE_OLDSETOPTIONS 21 -#define PTRACE_GET_THREAD_AREA 22 -#define PTRACE_SET_SYSCALL 23 -/* PTRACE_SYSCALL is 24 */ -#define PTRACE_GETCRUNCHREGS 25 -#define PTRACE_SETCRUNCHREGS 26 -#define PTRACE_GETVFPREGS 27 -#define PTRACE_SETVFPREGS 28 -#define PTRACE_GETHBPREGS 29 -#define PTRACE_SETHBPREGS 30 - -/* - * PSR bits - */ -#define USR26_MODE 0x00000000 -#define FIQ26_MODE 0x00000001 -#define IRQ26_MODE 0x00000002 -#define SVC26_MODE 0x00000003 -#define USR_MODE 0x00000010 -#define FIQ_MODE 0x00000011 -#define IRQ_MODE 0x00000012 -#define SVC_MODE 0x00000013 -#define ABT_MODE 0x00000017 -#define HYP_MODE 0x0000001a -#define UND_MODE 0x0000001b -#define SYSTEM_MODE 0x0000001f -#define MODE32_BIT 0x00000010 -#define MODE_MASK 0x0000001f -#define PSR_T_BIT 0x00000020 -#define PSR_F_BIT 0x00000040 -#define PSR_I_BIT 0x00000080 -#define PSR_A_BIT 0x00000100 -#define PSR_E_BIT 0x00000200 -#define PSR_J_BIT 0x01000000 -#define PSR_Q_BIT 0x08000000 -#define PSR_V_BIT 0x10000000 -#define PSR_C_BIT 0x20000000 -#define PSR_Z_BIT 0x40000000 -#define PSR_N_BIT 0x80000000 - -/* - * Groups of PSR bits - */ -#define PSR_f 0xff000000 /* Flags */ -#define PSR_s 0x00ff0000 /* Status */ -#define PSR_x 0x0000ff00 /* Extension */ -#define PSR_c 0x000000ff /* Control */ - -/* - * ARMv7 groups of PSR bits - */ -#define APSR_MASK 0xf80f0000 /* N, Z, C, V, Q and GE flags */ -#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */ -#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */ -#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */ - -/* - * Default endianness state - */ -#ifdef CONFIG_CPU_ENDIAN_BE8 -#define PSR_ENDSTATE PSR_E_BIT -#else -#define PSR_ENDSTATE 0 -#endif - -/* - * These are 'magic' values for PTRACE_PEEKUSR that return info about where a - * process is located in memory. - */ -#define PT_TEXT_ADDR 0x10000 -#define PT_DATA_ADDR 0x10004 -#define PT_TEXT_END_ADDR 0x10008 +#include <uapi/asm/ptrace.h> #ifndef __ASSEMBLY__ - -/* - * This struct defines the way the registers are stored on the - * stack during a system call. Note that sizeof(struct pt_regs) - * has to be a multiple of 8. - */ -#ifndef __KERNEL__ -struct pt_regs { - long uregs[18]; -}; -#else /* __KERNEL__ */ struct pt_regs { unsigned long uregs[18]; }; -#endif /* __KERNEL__ */ - -#define ARM_cpsr uregs[16] -#define ARM_pc uregs[15] -#define ARM_lr uregs[14] -#define ARM_sp uregs[13] -#define ARM_ip uregs[12] -#define ARM_fp uregs[11] -#define ARM_r10 uregs[10] -#define ARM_r9 uregs[9] -#define ARM_r8 uregs[8] -#define ARM_r7 uregs[7] -#define ARM_r6 uregs[6] -#define ARM_r5 uregs[5] -#define ARM_r4 uregs[4] -#define ARM_r3 uregs[3] -#define ARM_r2 uregs[2] -#define ARM_r1 uregs[1] -#define ARM_r0 uregs[0] -#define ARM_ORIG_r0 uregs[17] - -/* - * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS - * and core dumps. - */ -#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ ) - -#ifdef __KERNEL__ #define user_mode(regs) \ (((regs)->ARM_cpsr & 0xf) == 0) @@ -260,9 +139,5 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs) (struct pt_regs *)((sp | (THREAD_SIZE - 1)) - 7) - 1; \ }) -#endif /* __KERNEL__ */ - #endif /* __ASSEMBLY__ */ - #endif - diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 24d284a1bfc7..c50f05609501 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -14,176 +14,8 @@ #ifndef __ASMARM_SETUP_H #define __ASMARM_SETUP_H -#include <linux/types.h> +#include <uapi/asm/setup.h> -#define COMMAND_LINE_SIZE 1024 - -/* The list ends with an ATAG_NONE node. */ -#define ATAG_NONE 0x00000000 - -struct tag_header { - __u32 size; - __u32 tag; -}; - -/* The list must start with an ATAG_CORE node */ -#define ATAG_CORE 0x54410001 - -struct tag_core { - __u32 flags; /* bit 0 = read-only */ - __u32 pagesize; - __u32 rootdev; -}; - -/* it is allowed to have multiple ATAG_MEM nodes */ -#define ATAG_MEM 0x54410002 - -struct tag_mem32 { - __u32 size; - __u32 start; /* physical start address */ -}; - -/* VGA text type displays */ -#define ATAG_VIDEOTEXT 0x54410003 - -struct tag_videotext { - __u8 x; - __u8 y; - __u16 video_page; - __u8 video_mode; - __u8 video_cols; - __u16 video_ega_bx; - __u8 video_lines; - __u8 video_isvga; - __u16 video_points; -}; - -/* describes how the ramdisk will be used in kernel */ -#define ATAG_RAMDISK 0x54410004 - -struct tag_ramdisk { - __u32 flags; /* bit 0 = load, bit 1 = prompt */ - __u32 size; /* decompressed ramdisk size in _kilo_ bytes */ - __u32 start; /* starting block of floppy-based RAM disk image */ -}; - -/* describes where the compressed ramdisk image lives (virtual address) */ -/* - * this one accidentally used virtual addresses - as such, - * it's deprecated. - */ -#define ATAG_INITRD 0x54410005 - -/* describes where the compressed ramdisk image lives (physical address) */ -#define ATAG_INITRD2 0x54420005 - -struct tag_initrd { - __u32 start; /* physical start address */ - __u32 size; /* size of compressed ramdisk image in bytes */ -}; - -/* board serial number. "64 bits should be enough for everybody" */ -#define ATAG_SERIAL 0x54410006 - -struct tag_serialnr { - __u32 low; - __u32 high; -}; - -/* board revision */ -#define ATAG_REVISION 0x54410007 - -struct tag_revision { - __u32 rev; -}; - -/* initial values for vesafb-type framebuffers. see struct screen_info - * in include/linux/tty.h - */ -#define ATAG_VIDEOLFB 0x54410008 - -struct tag_videolfb { - __u16 lfb_width; - __u16 lfb_height; - __u16 lfb_depth; - __u16 lfb_linelength; - __u32 lfb_base; - __u32 lfb_size; - __u8 red_size; - __u8 red_pos; - __u8 green_size; - __u8 green_pos; - __u8 blue_size; - __u8 blue_pos; - __u8 rsvd_size; - __u8 rsvd_pos; -}; - -/* command line: \0 terminated string */ -#define ATAG_CMDLINE 0x54410009 - -struct tag_cmdline { - char cmdline[1]; /* this is the minimum size */ -}; - -/* acorn RiscPC specific information */ -#define ATAG_ACORN 0x41000101 - -struct tag_acorn { - __u32 memc_control_reg; - __u32 vram_pages; - __u8 sounddefault; - __u8 adfsdrives; -}; - -/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */ -#define ATAG_MEMCLK 0x41000402 - -struct tag_memclk { - __u32 fmemclk; -}; - -struct tag { - struct tag_header hdr; - union { - struct tag_core core; - struct tag_mem32 mem; - struct tag_videotext videotext; - struct tag_ramdisk ramdisk; - struct tag_initrd initrd; - struct tag_serialnr serialnr; - struct tag_revision revision; - struct tag_videolfb videolfb; - struct tag_cmdline cmdline; - - /* - * Acorn specific - */ - struct tag_acorn acorn; - - /* - * DC21285 specific - */ - struct tag_memclk memclk; - } u; -}; - -struct tagtable { - __u32 tag; - int (*parse)(const struct tag *); -}; - -#define tag_member_present(tag,member) \ - ((unsigned long)(&((struct tag *)0L)->member + 1) \ - <= (tag)->hdr.size * 4) - -#define tag_next(t) ((struct tag *)((__u32 *)(t) + (t)->hdr.size)) -#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) - -#define for_each_tag(t,base) \ - for (t = base; t->hdr.size; t = tag_next(t)) - -#ifdef __KERNEL__ #define __tag __used __attribute__((__section__(".taglist.init"))) #define __tagtable(tag, fn) \ @@ -221,6 +53,4 @@ extern int arm_add_memory(phys_addr_t start, phys_addr_t size); extern void early_print(const char *str, ...); extern void dump_machine_table(void); -#endif /* __KERNEL__ */ - #endif diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h index 43ba0fb1c8ad..5a7963dbd3fb 100644 --- a/arch/arm/include/asm/signal.h +++ b/arch/arm/include/asm/signal.h @@ -1,12 +1,8 @@ #ifndef _ASMARM_SIGNAL_H #define _ASMARM_SIGNAL_H -#include <linux/types.h> +#include <uapi/asm/signal.h> -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ /* Most things should be clean enough to redefine this at will, if care is taken to make libc match. */ @@ -20,100 +16,6 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -#define SIGSWI 32 - -/* - * SA_FLAGS values: - * - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_SIGINFO deliver the signal with SIGINFO structs - * SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task - * is running in 26-bit. - * SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)). - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NODEFER prevents the current signal from being masked in the handler. - * SA_RESETHAND clears the handler when the signal is delivered. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_THIRTYTWO 0x02000000 -#define SA_RESTORER 0x04000000 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include <asm-generic/signal-defs.h> - -#ifdef __KERNEL__ struct old_sigaction { __sighandler_t sa_handler; old_sigset_t sa_mask; @@ -132,33 +34,6 @@ struct k_sigaction { struct sigaction sa; }; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ #include <asm/sigcontext.h> #define ptrace_signal_deliver(regs, cookie) do { } while (0) #endif - -#endif diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h index b859d82e30ca..537fc9b91889 100644 --- a/arch/arm/include/asm/swab.h +++ b/arch/arm/include/asm/swab.h @@ -15,14 +15,8 @@ #ifndef __ASM_ARM_SWAB_H #define __ASM_ARM_SWAB_H -#include <linux/compiler.h> -#include <linux/types.h> +#include <uapi/asm/swab.h> -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif - -#if defined(__KERNEL__) #if __LINUX_ARM_ARCH__ >= 6 static inline __attribute_const__ __u32 __arch_swahb32(__u32 x) @@ -42,32 +36,3 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) #endif #endif - -#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6 -static inline __attribute_const__ __u32 __arch_swab32(__u32 x) -{ - __u32 t; - -#ifndef __thumb__ - if (!__builtin_constant_p(x)) { - /* - * The compiler needs a bit of a hint here to always do the - * right thing and not screw it up to different degrees - * depending on the gcc version. - */ - asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); - } else -#endif - t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ - - x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ - t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ - x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ - - return x; -} -#define __arch_swab32 __arch_swab32 - -#endif - -#endif diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 91819ad54424..8f60b6e6bd41 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -13,447 +13,10 @@ #ifndef __ASM_ARM_UNISTD_H #define __ASM_ARM_UNISTD_H -#define __NR_OABI_SYSCALL_BASE 0x900000 +#include <uapi/asm/unistd.h> -#if defined(__thumb__) || defined(__ARM_EABI__) -#define __NR_SYSCALL_BASE 0 -#else -#define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE -#endif - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) -#define __NR_exit (__NR_SYSCALL_BASE+ 1) -#define __NR_fork (__NR_SYSCALL_BASE+ 2) -#define __NR_read (__NR_SYSCALL_BASE+ 3) -#define __NR_write (__NR_SYSCALL_BASE+ 4) -#define __NR_open (__NR_SYSCALL_BASE+ 5) -#define __NR_close (__NR_SYSCALL_BASE+ 6) - /* 7 was sys_waitpid */ -#define __NR_creat (__NR_SYSCALL_BASE+ 8) -#define __NR_link (__NR_SYSCALL_BASE+ 9) -#define __NR_unlink (__NR_SYSCALL_BASE+ 10) -#define __NR_execve (__NR_SYSCALL_BASE+ 11) -#define __NR_chdir (__NR_SYSCALL_BASE+ 12) -#define __NR_time (__NR_SYSCALL_BASE+ 13) -#define __NR_mknod (__NR_SYSCALL_BASE+ 14) -#define __NR_chmod (__NR_SYSCALL_BASE+ 15) -#define __NR_lchown (__NR_SYSCALL_BASE+ 16) - /* 17 was sys_break */ - /* 18 was sys_stat */ -#define __NR_lseek (__NR_SYSCALL_BASE+ 19) -#define __NR_getpid (__NR_SYSCALL_BASE+ 20) -#define __NR_mount (__NR_SYSCALL_BASE+ 21) -#define __NR_umount (__NR_SYSCALL_BASE+ 22) -#define __NR_setuid (__NR_SYSCALL_BASE+ 23) -#define __NR_getuid (__NR_SYSCALL_BASE+ 24) -#define __NR_stime (__NR_SYSCALL_BASE+ 25) -#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) -#define __NR_alarm (__NR_SYSCALL_BASE+ 27) - /* 28 was sys_fstat */ -#define __NR_pause (__NR_SYSCALL_BASE+ 29) -#define __NR_utime (__NR_SYSCALL_BASE+ 30) - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access (__NR_SYSCALL_BASE+ 33) -#define __NR_nice (__NR_SYSCALL_BASE+ 34) - /* 35 was sys_ftime */ -#define __NR_sync (__NR_SYSCALL_BASE+ 36) -#define __NR_kill (__NR_SYSCALL_BASE+ 37) -#define __NR_rename (__NR_SYSCALL_BASE+ 38) -#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) -#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) -#define __NR_dup (__NR_SYSCALL_BASE+ 41) -#define __NR_pipe (__NR_SYSCALL_BASE+ 42) -#define __NR_times (__NR_SYSCALL_BASE+ 43) - /* 44 was sys_prof */ -#define __NR_brk (__NR_SYSCALL_BASE+ 45) -#define __NR_setgid (__NR_SYSCALL_BASE+ 46) -#define __NR_getgid (__NR_SYSCALL_BASE+ 47) - /* 48 was sys_signal */ -#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) -#define __NR_getegid (__NR_SYSCALL_BASE+ 50) -#define __NR_acct (__NR_SYSCALL_BASE+ 51) -#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) - /* 53 was sys_lock */ -#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) -#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) - /* 56 was sys_mpx */ -#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask (__NR_SYSCALL_BASE+ 60) -#define __NR_chroot (__NR_SYSCALL_BASE+ 61) -#define __NR_ustat (__NR_SYSCALL_BASE+ 62) -#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) -#define __NR_getppid (__NR_SYSCALL_BASE+ 64) -#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) -#define __NR_setsid (__NR_SYSCALL_BASE+ 66) -#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) - /* 68 was sys_sgetmask */ - /* 69 was sys_ssetmask */ -#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) -#define __NR_setregid (__NR_SYSCALL_BASE+ 71) -#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) -#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) -#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) -#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) -#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ -#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) -#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) -#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) -#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) -#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) -#define __NR_select (__NR_SYSCALL_BASE+ 82) -#define __NR_symlink (__NR_SYSCALL_BASE+ 83) - /* 84 was sys_lstat */ -#define __NR_readlink (__NR_SYSCALL_BASE+ 85) -#define __NR_uselib (__NR_SYSCALL_BASE+ 86) -#define __NR_swapon (__NR_SYSCALL_BASE+ 87) -#define __NR_reboot (__NR_SYSCALL_BASE+ 88) -#define __NR_readdir (__NR_SYSCALL_BASE+ 89) -#define __NR_mmap (__NR_SYSCALL_BASE+ 90) -#define __NR_munmap (__NR_SYSCALL_BASE+ 91) -#define __NR_truncate (__NR_SYSCALL_BASE+ 92) -#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) -#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) -#define __NR_fchown (__NR_SYSCALL_BASE+ 95) -#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) -#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) - /* 98 was sys_profil */ -#define __NR_statfs (__NR_SYSCALL_BASE+ 99) -#define __NR_fstatfs (__NR_SYSCALL_BASE+100) - /* 101 was sys_ioperm */ -#define __NR_socketcall (__NR_SYSCALL_BASE+102) -#define __NR_syslog (__NR_SYSCALL_BASE+103) -#define __NR_setitimer (__NR_SYSCALL_BASE+104) -#define __NR_getitimer (__NR_SYSCALL_BASE+105) -#define __NR_stat (__NR_SYSCALL_BASE+106) -#define __NR_lstat (__NR_SYSCALL_BASE+107) -#define __NR_fstat (__NR_SYSCALL_BASE+108) - /* 109 was sys_uname */ - /* 110 was sys_iopl */ -#define __NR_vhangup (__NR_SYSCALL_BASE+111) - /* 112 was sys_idle */ -#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ -#define __NR_wait4 (__NR_SYSCALL_BASE+114) -#define __NR_swapoff (__NR_SYSCALL_BASE+115) -#define __NR_sysinfo (__NR_SYSCALL_BASE+116) -#define __NR_ipc (__NR_SYSCALL_BASE+117) -#define __NR_fsync (__NR_SYSCALL_BASE+118) -#define __NR_sigreturn (__NR_SYSCALL_BASE+119) -#define __NR_clone (__NR_SYSCALL_BASE+120) -#define __NR_setdomainname (__NR_SYSCALL_BASE+121) -#define __NR_uname (__NR_SYSCALL_BASE+122) - /* 123 was sys_modify_ldt */ -#define __NR_adjtimex (__NR_SYSCALL_BASE+124) -#define __NR_mprotect (__NR_SYSCALL_BASE+125) -#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) - /* 127 was sys_create_module */ -#define __NR_init_module (__NR_SYSCALL_BASE+128) -#define __NR_delete_module (__NR_SYSCALL_BASE+129) - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl (__NR_SYSCALL_BASE+131) -#define __NR_getpgid (__NR_SYSCALL_BASE+132) -#define __NR_fchdir (__NR_SYSCALL_BASE+133) -#define __NR_bdflush (__NR_SYSCALL_BASE+134) -#define __NR_sysfs (__NR_SYSCALL_BASE+135) -#define __NR_personality (__NR_SYSCALL_BASE+136) - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid (__NR_SYSCALL_BASE+138) -#define __NR_setfsgid (__NR_SYSCALL_BASE+139) -#define __NR__llseek (__NR_SYSCALL_BASE+140) -#define __NR_getdents (__NR_SYSCALL_BASE+141) -#define __NR__newselect (__NR_SYSCALL_BASE+142) -#define __NR_flock (__NR_SYSCALL_BASE+143) -#define __NR_msync (__NR_SYSCALL_BASE+144) -#define __NR_readv (__NR_SYSCALL_BASE+145) -#define __NR_writev (__NR_SYSCALL_BASE+146) -#define __NR_getsid (__NR_SYSCALL_BASE+147) -#define __NR_fdatasync (__NR_SYSCALL_BASE+148) -#define __NR__sysctl (__NR_SYSCALL_BASE+149) -#define __NR_mlock (__NR_SYSCALL_BASE+150) -#define __NR_munlock (__NR_SYSCALL_BASE+151) -#define __NR_mlockall (__NR_SYSCALL_BASE+152) -#define __NR_munlockall (__NR_SYSCALL_BASE+153) -#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) -#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) -#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) -#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) -#define __NR_sched_yield (__NR_SYSCALL_BASE+158) -#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) -#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) -#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) -#define __NR_nanosleep (__NR_SYSCALL_BASE+162) -#define __NR_mremap (__NR_SYSCALL_BASE+163) -#define __NR_setresuid (__NR_SYSCALL_BASE+164) -#define __NR_getresuid (__NR_SYSCALL_BASE+165) - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll (__NR_SYSCALL_BASE+168) -#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) -#define __NR_setresgid (__NR_SYSCALL_BASE+170) -#define __NR_getresgid (__NR_SYSCALL_BASE+171) -#define __NR_prctl (__NR_SYSCALL_BASE+172) -#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) -#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) -#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) -#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) -#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) -#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) -#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) -#define __NR_pread64 (__NR_SYSCALL_BASE+180) -#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) -#define __NR_chown (__NR_SYSCALL_BASE+182) -#define __NR_getcwd (__NR_SYSCALL_BASE+183) -#define __NR_capget (__NR_SYSCALL_BASE+184) -#define __NR_capset (__NR_SYSCALL_BASE+185) -#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) -#define __NR_sendfile (__NR_SYSCALL_BASE+187) - /* 188 reserved */ - /* 189 reserved */ -#define __NR_vfork (__NR_SYSCALL_BASE+190) -#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ -#define __NR_mmap2 (__NR_SYSCALL_BASE+192) -#define __NR_truncate64 (__NR_SYSCALL_BASE+193) -#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) -#define __NR_stat64 (__NR_SYSCALL_BASE+195) -#define __NR_lstat64 (__NR_SYSCALL_BASE+196) -#define __NR_fstat64 (__NR_SYSCALL_BASE+197) -#define __NR_lchown32 (__NR_SYSCALL_BASE+198) -#define __NR_getuid32 (__NR_SYSCALL_BASE+199) -#define __NR_getgid32 (__NR_SYSCALL_BASE+200) -#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) -#define __NR_getegid32 (__NR_SYSCALL_BASE+202) -#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) -#define __NR_setregid32 (__NR_SYSCALL_BASE+204) -#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) -#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) -#define __NR_fchown32 (__NR_SYSCALL_BASE+207) -#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) -#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) -#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) -#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) -#define __NR_chown32 (__NR_SYSCALL_BASE+212) -#define __NR_setuid32 (__NR_SYSCALL_BASE+213) -#define __NR_setgid32 (__NR_SYSCALL_BASE+214) -#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) -#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) -#define __NR_getdents64 (__NR_SYSCALL_BASE+217) -#define __NR_pivot_root (__NR_SYSCALL_BASE+218) -#define __NR_mincore (__NR_SYSCALL_BASE+219) -#define __NR_madvise (__NR_SYSCALL_BASE+220) -#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) - /* 222 for tux */ - /* 223 is unused */ -#define __NR_gettid (__NR_SYSCALL_BASE+224) -#define __NR_readahead (__NR_SYSCALL_BASE+225) -#define __NR_setxattr (__NR_SYSCALL_BASE+226) -#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) -#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) -#define __NR_getxattr (__NR_SYSCALL_BASE+229) -#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) -#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) -#define __NR_listxattr (__NR_SYSCALL_BASE+232) -#define __NR_llistxattr (__NR_SYSCALL_BASE+233) -#define __NR_flistxattr (__NR_SYSCALL_BASE+234) -#define __NR_removexattr (__NR_SYSCALL_BASE+235) -#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) -#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) -#define __NR_tkill (__NR_SYSCALL_BASE+238) -#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) -#define __NR_futex (__NR_SYSCALL_BASE+240) -#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) -#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) -#define __NR_io_setup (__NR_SYSCALL_BASE+243) -#define __NR_io_destroy (__NR_SYSCALL_BASE+244) -#define __NR_io_getevents (__NR_SYSCALL_BASE+245) -#define __NR_io_submit (__NR_SYSCALL_BASE+246) -#define __NR_io_cancel (__NR_SYSCALL_BASE+247) -#define __NR_exit_group (__NR_SYSCALL_BASE+248) -#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) -#define __NR_epoll_create (__NR_SYSCALL_BASE+250) -#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) -#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) -#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) - /* 254 for set_thread_area */ - /* 255 for get_thread_area */ -#define __NR_set_tid_address (__NR_SYSCALL_BASE+256) -#define __NR_timer_create (__NR_SYSCALL_BASE+257) -#define __NR_timer_settime (__NR_SYSCALL_BASE+258) -#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) -#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) -#define __NR_timer_delete (__NR_SYSCALL_BASE+261) -#define __NR_clock_settime (__NR_SYSCALL_BASE+262) -#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) -#define __NR_clock_getres (__NR_SYSCALL_BASE+264) -#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) -#define __NR_statfs64 (__NR_SYSCALL_BASE+266) -#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) -#define __NR_tgkill (__NR_SYSCALL_BASE+268) -#define __NR_utimes (__NR_SYSCALL_BASE+269) -#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) -#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) -#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) -#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) -#define __NR_mq_open (__NR_SYSCALL_BASE+274) -#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) -#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) -#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) -#define __NR_mq_notify (__NR_SYSCALL_BASE+278) -#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) -#define __NR_waitid (__NR_SYSCALL_BASE+280) -#define __NR_socket (__NR_SYSCALL_BASE+281) -#define __NR_bind (__NR_SYSCALL_BASE+282) -#define __NR_connect (__NR_SYSCALL_BASE+283) -#define __NR_listen (__NR_SYSCALL_BASE+284) -#define __NR_accept (__NR_SYSCALL_BASE+285) -#define __NR_getsockname (__NR_SYSCALL_BASE+286) -#define __NR_getpeername (__NR_SYSCALL_BASE+287) -#define __NR_socketpair (__NR_SYSCALL_BASE+288) -#define __NR_send (__NR_SYSCALL_BASE+289) -#define __NR_sendto (__NR_SYSCALL_BASE+290) -#define __NR_recv (__NR_SYSCALL_BASE+291) -#define __NR_recvfrom (__NR_SYSCALL_BASE+292) -#define __NR_shutdown (__NR_SYSCALL_BASE+293) -#define __NR_setsockopt (__NR_SYSCALL_BASE+294) -#define __NR_getsockopt (__NR_SYSCALL_BASE+295) -#define __NR_sendmsg (__NR_SYSCALL_BASE+296) -#define __NR_recvmsg (__NR_SYSCALL_BASE+297) -#define __NR_semop (__NR_SYSCALL_BASE+298) -#define __NR_semget (__NR_SYSCALL_BASE+299) -#define __NR_semctl (__NR_SYSCALL_BASE+300) -#define __NR_msgsnd (__NR_SYSCALL_BASE+301) -#define __NR_msgrcv (__NR_SYSCALL_BASE+302) -#define __NR_msgget (__NR_SYSCALL_BASE+303) -#define __NR_msgctl (__NR_SYSCALL_BASE+304) -#define __NR_shmat (__NR_SYSCALL_BASE+305) -#define __NR_shmdt (__NR_SYSCALL_BASE+306) -#define __NR_shmget (__NR_SYSCALL_BASE+307) -#define __NR_shmctl (__NR_SYSCALL_BASE+308) -#define __NR_add_key (__NR_SYSCALL_BASE+309) -#define __NR_request_key (__NR_SYSCALL_BASE+310) -#define __NR_keyctl (__NR_SYSCALL_BASE+311) -#define __NR_semtimedop (__NR_SYSCALL_BASE+312) -#define __NR_vserver (__NR_SYSCALL_BASE+313) -#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) -#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) -#define __NR_inotify_init (__NR_SYSCALL_BASE+316) -#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) -#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) -#define __NR_mbind (__NR_SYSCALL_BASE+319) -#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) -#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) -#define __NR_openat (__NR_SYSCALL_BASE+322) -#define __NR_mkdirat (__NR_SYSCALL_BASE+323) -#define __NR_mknodat (__NR_SYSCALL_BASE+324) -#define __NR_fchownat (__NR_SYSCALL_BASE+325) -#define __NR_futimesat (__NR_SYSCALL_BASE+326) -#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) -#define __NR_unlinkat (__NR_SYSCALL_BASE+328) -#define __NR_renameat (__NR_SYSCALL_BASE+329) -#define __NR_linkat (__NR_SYSCALL_BASE+330) -#define __NR_symlinkat (__NR_SYSCALL_BASE+331) -#define __NR_readlinkat (__NR_SYSCALL_BASE+332) -#define __NR_fchmodat (__NR_SYSCALL_BASE+333) -#define __NR_faccessat (__NR_SYSCALL_BASE+334) -#define __NR_pselect6 (__NR_SYSCALL_BASE+335) -#define __NR_ppoll (__NR_SYSCALL_BASE+336) -#define __NR_unshare (__NR_SYSCALL_BASE+337) -#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) -#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) -#define __NR_splice (__NR_SYSCALL_BASE+340) -#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) -#define __NR_sync_file_range2 __NR_arm_sync_file_range -#define __NR_tee (__NR_SYSCALL_BASE+342) -#define __NR_vmsplice (__NR_SYSCALL_BASE+343) -#define __NR_move_pages (__NR_SYSCALL_BASE+344) -#define __NR_getcpu (__NR_SYSCALL_BASE+345) -#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346) -#define __NR_kexec_load (__NR_SYSCALL_BASE+347) -#define __NR_utimensat (__NR_SYSCALL_BASE+348) -#define __NR_signalfd (__NR_SYSCALL_BASE+349) -#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) -#define __NR_eventfd (__NR_SYSCALL_BASE+351) -#define __NR_fallocate (__NR_SYSCALL_BASE+352) -#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) -#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) -#define __NR_signalfd4 (__NR_SYSCALL_BASE+355) -#define __NR_eventfd2 (__NR_SYSCALL_BASE+356) -#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357) -#define __NR_dup3 (__NR_SYSCALL_BASE+358) -#define __NR_pipe2 (__NR_SYSCALL_BASE+359) -#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) -#define __NR_preadv (__NR_SYSCALL_BASE+361) -#define __NR_pwritev (__NR_SYSCALL_BASE+362) -#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363) -#define __NR_perf_event_open (__NR_SYSCALL_BASE+364) -#define __NR_recvmmsg (__NR_SYSCALL_BASE+365) -#define __NR_accept4 (__NR_SYSCALL_BASE+366) -#define __NR_fanotify_init (__NR_SYSCALL_BASE+367) -#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) -#define __NR_prlimit64 (__NR_SYSCALL_BASE+369) -#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370) -#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) -#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) -#define __NR_syncfs (__NR_SYSCALL_BASE+373) -#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) -#define __NR_setns (__NR_SYSCALL_BASE+375) -#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) -#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) - /* 378 for kcmp */ - -/* - * This may need to be greater than __NR_last_syscall+1 in order to - * account for the padding in the syscall table - */ -#ifdef __KERNEL__ #define __NR_syscalls (380) -#endif /* __KERNEL__ */ - -/* - * The following SWIs are ARM private. - */ -#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000) -#define __ARM_NR_breakpoint (__ARM_NR_BASE+1) -#define __ARM_NR_cacheflush (__ARM_NR_BASE+2) -#define __ARM_NR_usr26 (__ARM_NR_BASE+3) -#define __ARM_NR_usr32 (__ARM_NR_BASE+4) -#define __ARM_NR_set_tls (__ARM_NR_BASE+5) - -/* - * *NOTE*: This is a ghost syscall private to the kernel. Only the - * __kuser_cmpxchg code in entry-armv.S should be aware of its - * existence. Don't ever use this from user code. - */ -#ifdef __KERNEL__ #define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0) -#endif - -/* - * The following syscalls are obsolete and no longer available for EABI. - */ -#if !defined(__KERNEL__) -#if defined(__ARM_EABI__) -#undef __NR_time -#undef __NR_umount -#undef __NR_stime -#undef __NR_alarm -#undef __NR_utime -#undef __NR_getrlimit -#undef __NR_select -#undef __NR_readdir -#undef __NR_mmap -#undef __NR_socketcall -#undef __NR_syscall -#undef __NR_ipc -#endif -#endif - -#ifdef __KERNEL__ #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_GETHOSTNAME @@ -495,5 +58,4 @@ #define __IGNORE_migrate_pages #define __IGNORE_kcmp -#endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild index baebb3da1d44..47bcb2d254af 100644 --- a/arch/arm/include/uapi/asm/Kbuild +++ b/arch/arm/include/uapi/asm/Kbuild @@ -1,3 +1,19 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += a.out.h +header-y += byteorder.h +header-y += fcntl.h +header-y += hwcap.h +header-y += ioctls.h +header-y += kvm_para.h +header-y += mman.h +header-y += posix_types.h +header-y += ptrace.h +header-y += setup.h +header-y += sigcontext.h +header-y += signal.h +header-y += stat.h +header-y += statfs.h +header-y += swab.h +header-y += unistd.h diff --git a/arch/arm/include/asm/a.out.h b/arch/arm/include/uapi/asm/a.out.h index 083894b2e3bc..083894b2e3bc 100644 --- a/arch/arm/include/asm/a.out.h +++ b/arch/arm/include/uapi/asm/a.out.h diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/uapi/asm/byteorder.h index 77379748b171..77379748b171 100644 --- a/arch/arm/include/asm/byteorder.h +++ b/arch/arm/include/uapi/asm/byteorder.h diff --git a/arch/arm/include/asm/fcntl.h b/arch/arm/include/uapi/asm/fcntl.h index a80b6607b2ef..a80b6607b2ef 100644 --- a/arch/arm/include/asm/fcntl.h +++ b/arch/arm/include/uapi/asm/fcntl.h diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h new file mode 100644 index 000000000000..f254f6503cce --- /dev/null +++ b/arch/arm/include/uapi/asm/hwcap.h @@ -0,0 +1,29 @@ +#ifndef _UAPI__ASMARM_HWCAP_H +#define _UAPI__ASMARM_HWCAP_H + +/* + * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP + */ +#define HWCAP_SWP (1 << 0) +#define HWCAP_HALF (1 << 1) +#define HWCAP_THUMB (1 << 2) +#define HWCAP_26BIT (1 << 3) /* Play it safe */ +#define HWCAP_FAST_MULT (1 << 4) +#define HWCAP_FPA (1 << 5) +#define HWCAP_VFP (1 << 6) +#define HWCAP_EDSP (1 << 7) +#define HWCAP_JAVA (1 << 8) +#define HWCAP_IWMMXT (1 << 9) +#define HWCAP_CRUNCH (1 << 10) +#define HWCAP_THUMBEE (1 << 11) +#define HWCAP_NEON (1 << 12) +#define HWCAP_VFPv3 (1 << 13) +#define HWCAP_VFPv3D16 (1 << 14) +#define HWCAP_TLS (1 << 15) +#define HWCAP_VFPv4 (1 << 16) +#define HWCAP_IDIVA (1 << 17) +#define HWCAP_IDIVT (1 << 18) +#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT) + + +#endif /* _UAPI__ASMARM_HWCAP_H */ diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/uapi/asm/ioctls.h index 9c9629816128..9c9629816128 100644 --- a/arch/arm/include/asm/ioctls.h +++ b/arch/arm/include/uapi/asm/ioctls.h diff --git a/arch/arm/include/asm/kvm_para.h b/arch/arm/include/uapi/asm/kvm_para.h index 14fab8f0b957..14fab8f0b957 100644 --- a/arch/arm/include/asm/kvm_para.h +++ b/arch/arm/include/uapi/asm/kvm_para.h diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/uapi/asm/mman.h index 41f99c573b93..41f99c573b93 100644 --- a/arch/arm/include/asm/mman.h +++ b/arch/arm/include/uapi/asm/mman.h diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/uapi/asm/posix_types.h index d2de9cbbcd9b..d2de9cbbcd9b 100644 --- a/arch/arm/include/asm/posix_types.h +++ b/arch/arm/include/uapi/asm/posix_types.h diff --git a/arch/arm/include/uapi/asm/ptrace.h b/arch/arm/include/uapi/asm/ptrace.h new file mode 100644 index 000000000000..96ee0929790f --- /dev/null +++ b/arch/arm/include/uapi/asm/ptrace.h @@ -0,0 +1,138 @@ +/* + * arch/arm/include/asm/ptrace.h + * + * Copyright (C) 1996-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _UAPI__ASM_ARM_PTRACE_H +#define _UAPI__ASM_ARM_PTRACE_H + +#include <asm/hwcap.h> + +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +/* PTRACE_ATTACH is 16 */ +/* PTRACE_DETACH is 17 */ +#define PTRACE_GETWMMXREGS 18 +#define PTRACE_SETWMMXREGS 19 +/* 20 is unused */ +#define PTRACE_OLDSETOPTIONS 21 +#define PTRACE_GET_THREAD_AREA 22 +#define PTRACE_SET_SYSCALL 23 +/* PTRACE_SYSCALL is 24 */ +#define PTRACE_GETCRUNCHREGS 25 +#define PTRACE_SETCRUNCHREGS 26 +#define PTRACE_GETVFPREGS 27 +#define PTRACE_SETVFPREGS 28 +#define PTRACE_GETHBPREGS 29 +#define PTRACE_SETHBPREGS 30 + +/* + * PSR bits + */ +#define USR26_MODE 0x00000000 +#define FIQ26_MODE 0x00000001 +#define IRQ26_MODE 0x00000002 +#define SVC26_MODE 0x00000003 +#define USR_MODE 0x00000010 +#define FIQ_MODE 0x00000011 +#define IRQ_MODE 0x00000012 +#define SVC_MODE 0x00000013 +#define ABT_MODE 0x00000017 +#define HYP_MODE 0x0000001a +#define UND_MODE 0x0000001b +#define SYSTEM_MODE 0x0000001f +#define MODE32_BIT 0x00000010 +#define MODE_MASK 0x0000001f +#define PSR_T_BIT 0x00000020 +#define PSR_F_BIT 0x00000040 +#define PSR_I_BIT 0x00000080 +#define PSR_A_BIT 0x00000100 +#define PSR_E_BIT 0x00000200 +#define PSR_J_BIT 0x01000000 +#define PSR_Q_BIT 0x08000000 +#define PSR_V_BIT 0x10000000 +#define PSR_C_BIT 0x20000000 +#define PSR_Z_BIT 0x40000000 +#define PSR_N_BIT 0x80000000 + +/* + * Groups of PSR bits + */ +#define PSR_f 0xff000000 /* Flags */ +#define PSR_s 0x00ff0000 /* Status */ +#define PSR_x 0x0000ff00 /* Extension */ +#define PSR_c 0x000000ff /* Control */ + +/* + * ARMv7 groups of PSR bits + */ +#define APSR_MASK 0xf80f0000 /* N, Z, C, V, Q and GE flags */ +#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */ +#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */ +#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */ + +/* + * Default endianness state + */ +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define PSR_ENDSTATE PSR_E_BIT +#else +#define PSR_ENDSTATE 0 +#endif + +/* + * These are 'magic' values for PTRACE_PEEKUSR that return info about where a + * process is located in memory. + */ +#define PT_TEXT_ADDR 0x10000 +#define PT_DATA_ADDR 0x10004 +#define PT_TEXT_END_ADDR 0x10008 + +#ifndef __ASSEMBLY__ + +/* + * This struct defines the way the registers are stored on the + * stack during a system call. Note that sizeof(struct pt_regs) + * has to be a multiple of 8. + */ +#ifndef __KERNEL__ +struct pt_regs { + long uregs[18]; +}; +#endif /* __KERNEL__ */ + +#define ARM_cpsr uregs[16] +#define ARM_pc uregs[15] +#define ARM_lr uregs[14] +#define ARM_sp uregs[13] +#define ARM_ip uregs[12] +#define ARM_fp uregs[11] +#define ARM_r10 uregs[10] +#define ARM_r9 uregs[9] +#define ARM_r8 uregs[8] +#define ARM_r7 uregs[7] +#define ARM_r6 uregs[6] +#define ARM_r5 uregs[5] +#define ARM_r4 uregs[4] +#define ARM_r3 uregs[3] +#define ARM_r2 uregs[2] +#define ARM_r1 uregs[1] +#define ARM_r0 uregs[0] +#define ARM_ORIG_r0 uregs[17] + +/* + * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS + * and core dumps. + */ +#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ ) + + +#endif /* __ASSEMBLY__ */ + +#endif /* _UAPI__ASM_ARM_PTRACE_H */ diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h new file mode 100644 index 000000000000..979ff4016404 --- /dev/null +++ b/arch/arm/include/uapi/asm/setup.h @@ -0,0 +1,187 @@ +/* + * linux/include/asm/setup.h + * + * Copyright (C) 1997-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Structure passed to kernel to tell it about the + * hardware it's running on. See Documentation/arm/Setup + * for more info. + */ +#ifndef _UAPI__ASMARM_SETUP_H +#define _UAPI__ASMARM_SETUP_H + +#include <linux/types.h> + +#define COMMAND_LINE_SIZE 1024 + +/* The list ends with an ATAG_NONE node. */ +#define ATAG_NONE 0x00000000 + +struct tag_header { + __u32 size; + __u32 tag; +}; + +/* The list must start with an ATAG_CORE node */ +#define ATAG_CORE 0x54410001 + +struct tag_core { + __u32 flags; /* bit 0 = read-only */ + __u32 pagesize; + __u32 rootdev; +}; + +/* it is allowed to have multiple ATAG_MEM nodes */ +#define ATAG_MEM 0x54410002 + +struct tag_mem32 { + __u32 size; + __u32 start; /* physical start address */ +}; + +/* VGA text type displays */ +#define ATAG_VIDEOTEXT 0x54410003 + +struct tag_videotext { + __u8 x; + __u8 y; + __u16 video_page; + __u8 video_mode; + __u8 video_cols; + __u16 video_ega_bx; + __u8 video_lines; + __u8 video_isvga; + __u16 video_points; +}; + +/* describes how the ramdisk will be used in kernel */ +#define ATAG_RAMDISK 0x54410004 + +struct tag_ramdisk { + __u32 flags; /* bit 0 = load, bit 1 = prompt */ + __u32 size; /* decompressed ramdisk size in _kilo_ bytes */ + __u32 start; /* starting block of floppy-based RAM disk image */ +}; + +/* describes where the compressed ramdisk image lives (virtual address) */ +/* + * this one accidentally used virtual addresses - as such, + * it's deprecated. + */ +#define ATAG_INITRD 0x54410005 + +/* describes where the compressed ramdisk image lives (physical address) */ +#define ATAG_INITRD2 0x54420005 + +struct tag_initrd { + __u32 start; /* physical start address */ + __u32 size; /* size of compressed ramdisk image in bytes */ +}; + +/* board serial number. "64 bits should be enough for everybody" */ +#define ATAG_SERIAL 0x54410006 + +struct tag_serialnr { + __u32 low; + __u32 high; +}; + +/* board revision */ +#define ATAG_REVISION 0x54410007 + +struct tag_revision { + __u32 rev; +}; + +/* initial values for vesafb-type framebuffers. see struct screen_info + * in include/linux/tty.h + */ +#define ATAG_VIDEOLFB 0x54410008 + +struct tag_videolfb { + __u16 lfb_width; + __u16 lfb_height; + __u16 lfb_depth; + __u16 lfb_linelength; + __u32 lfb_base; + __u32 lfb_size; + __u8 red_size; + __u8 red_pos; + __u8 green_size; + __u8 green_pos; + __u8 blue_size; + __u8 blue_pos; + __u8 rsvd_size; + __u8 rsvd_pos; +}; + +/* command line: \0 terminated string */ +#define ATAG_CMDLINE 0x54410009 + +struct tag_cmdline { + char cmdline[1]; /* this is the minimum size */ +}; + +/* acorn RiscPC specific information */ +#define ATAG_ACORN 0x41000101 + +struct tag_acorn { + __u32 memc_control_reg; + __u32 vram_pages; + __u8 sounddefault; + __u8 adfsdrives; +}; + +/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */ +#define ATAG_MEMCLK 0x41000402 + +struct tag_memclk { + __u32 fmemclk; +}; + +struct tag { + struct tag_header hdr; + union { + struct tag_core core; + struct tag_mem32 mem; + struct tag_videotext videotext; + struct tag_ramdisk ramdisk; + struct tag_initrd initrd; + struct tag_serialnr serialnr; + struct tag_revision revision; + struct tag_videolfb videolfb; + struct tag_cmdline cmdline; + + /* + * Acorn specific + */ + struct tag_acorn acorn; + + /* + * DC21285 specific + */ + struct tag_memclk memclk; + } u; +}; + +struct tagtable { + __u32 tag; + int (*parse)(const struct tag *); +}; + +#define tag_member_present(tag,member) \ + ((unsigned long)(&((struct tag *)0L)->member + 1) \ + <= (tag)->hdr.size * 4) + +#define tag_next(t) ((struct tag *)((__u32 *)(t) + (t)->hdr.size)) +#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) + +#define for_each_tag(t,base) \ + for (t = base; t->hdr.size; t = tag_next(t)) + + +#endif /* _UAPI__ASMARM_SETUP_H */ diff --git a/arch/arm/include/asm/sigcontext.h b/arch/arm/include/uapi/asm/sigcontext.h index fc0b80b6a6fc..fc0b80b6a6fc 100644 --- a/arch/arm/include/asm/sigcontext.h +++ b/arch/arm/include/uapi/asm/sigcontext.h diff --git a/arch/arm/include/uapi/asm/signal.h b/arch/arm/include/uapi/asm/signal.h new file mode 100644 index 000000000000..921c57fdc52e --- /dev/null +++ b/arch/arm/include/uapi/asm/signal.h @@ -0,0 +1,127 @@ +#ifndef _UAPI_ASMARM_SIGNAL_H +#define _UAPI_ASMARM_SIGNAL_H + +#include <linux/types.h> + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifndef __KERNEL__ +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +#define SIGSWI 32 + +/* + * SA_FLAGS values: + * + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_SIGINFO deliver the signal with SIGINFO structs + * SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task + * is running in 26-bit. + * SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)). + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NODEFER prevents the current signal from being masked in the handler. + * SA_RESETHAND clears the handler when the signal is delivered. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_THIRTYTWO 0x02000000 +#define SA_RESTORER 0x04000000 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include <asm-generic/signal-defs.h> + +#ifndef __KERNEL__ +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + + +#endif /* _UAPI_ASMARM_SIGNAL_H */ diff --git a/arch/arm/include/asm/stat.h b/arch/arm/include/uapi/asm/stat.h index 42c0c13999d5..42c0c13999d5 100644 --- a/arch/arm/include/asm/stat.h +++ b/arch/arm/include/uapi/asm/stat.h diff --git a/arch/arm/include/asm/statfs.h b/arch/arm/include/uapi/asm/statfs.h index 079447c05ba7..079447c05ba7 100644 --- a/arch/arm/include/asm/statfs.h +++ b/arch/arm/include/uapi/asm/statfs.h diff --git a/arch/arm/include/uapi/asm/swab.h b/arch/arm/include/uapi/asm/swab.h new file mode 100644 index 000000000000..6fcb32a5c453 --- /dev/null +++ b/arch/arm/include/uapi/asm/swab.h @@ -0,0 +1,53 @@ +/* + * arch/arm/include/asm/byteorder.h + * + * ARM Endian-ness. In little endian mode, the data bus is connected such + * that byte accesses appear as: + * 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31 + * and word accesses (data or instruction) appear as: + * d0...d31 + * + * When in big endian mode, byte accesses appear as: + * 0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7 + * and word accesses (data or instruction) appear as: + * d0...d31 + */ +#ifndef _UAPI__ASM_ARM_SWAB_H +#define _UAPI__ASM_ARM_SWAB_H + +#include <linux/compiler.h> +#include <linux/types.h> + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __SWAB_64_THRU_32__ +#endif + + +#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6 +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) +{ + __u32 t; + +#ifndef __thumb__ + if (!__builtin_constant_p(x)) { + /* + * The compiler needs a bit of a hint here to always do the + * right thing and not screw it up to different degrees + * depending on the gcc version. + */ + asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); + } else +#endif + t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ + + x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ + t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ + x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ + + return x; +} +#define __arch_swab32 __arch_swab32 + +#endif + +#endif /* _UAPI__ASM_ARM_SWAB_H */ diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h new file mode 100644 index 000000000000..ac03bdb4ae44 --- /dev/null +++ b/arch/arm/include/uapi/asm/unistd.h @@ -0,0 +1,450 @@ +/* + * arch/arm/include/asm/unistd.h + * + * Copyright (C) 2001-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Please forward _all_ changes to this file to rmk@arm.linux.org.uk, + * no matter what the change is. Thanks! + */ +#ifndef _UAPI__ASM_ARM_UNISTD_H +#define _UAPI__ASM_ARM_UNISTD_H + +#define __NR_OABI_SYSCALL_BASE 0x900000 + +#if defined(__thumb__) || defined(__ARM_EABI__) +#define __NR_SYSCALL_BASE 0 +#else +#define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE +#endif + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) +#define __NR_exit (__NR_SYSCALL_BASE+ 1) +#define __NR_fork (__NR_SYSCALL_BASE+ 2) +#define __NR_read (__NR_SYSCALL_BASE+ 3) +#define __NR_write (__NR_SYSCALL_BASE+ 4) +#define __NR_open (__NR_SYSCALL_BASE+ 5) +#define __NR_close (__NR_SYSCALL_BASE+ 6) + /* 7 was sys_waitpid */ +#define __NR_creat (__NR_SYSCALL_BASE+ 8) +#define __NR_link (__NR_SYSCALL_BASE+ 9) +#define __NR_unlink (__NR_SYSCALL_BASE+ 10) +#define __NR_execve (__NR_SYSCALL_BASE+ 11) +#define __NR_chdir (__NR_SYSCALL_BASE+ 12) +#define __NR_time (__NR_SYSCALL_BASE+ 13) +#define __NR_mknod (__NR_SYSCALL_BASE+ 14) +#define __NR_chmod (__NR_SYSCALL_BASE+ 15) +#define __NR_lchown (__NR_SYSCALL_BASE+ 16) + /* 17 was sys_break */ + /* 18 was sys_stat */ +#define __NR_lseek (__NR_SYSCALL_BASE+ 19) +#define __NR_getpid (__NR_SYSCALL_BASE+ 20) +#define __NR_mount (__NR_SYSCALL_BASE+ 21) +#define __NR_umount (__NR_SYSCALL_BASE+ 22) +#define __NR_setuid (__NR_SYSCALL_BASE+ 23) +#define __NR_getuid (__NR_SYSCALL_BASE+ 24) +#define __NR_stime (__NR_SYSCALL_BASE+ 25) +#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) +#define __NR_alarm (__NR_SYSCALL_BASE+ 27) + /* 28 was sys_fstat */ +#define __NR_pause (__NR_SYSCALL_BASE+ 29) +#define __NR_utime (__NR_SYSCALL_BASE+ 30) + /* 31 was sys_stty */ + /* 32 was sys_gtty */ +#define __NR_access (__NR_SYSCALL_BASE+ 33) +#define __NR_nice (__NR_SYSCALL_BASE+ 34) + /* 35 was sys_ftime */ +#define __NR_sync (__NR_SYSCALL_BASE+ 36) +#define __NR_kill (__NR_SYSCALL_BASE+ 37) +#define __NR_rename (__NR_SYSCALL_BASE+ 38) +#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) +#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) +#define __NR_dup (__NR_SYSCALL_BASE+ 41) +#define __NR_pipe (__NR_SYSCALL_BASE+ 42) +#define __NR_times (__NR_SYSCALL_BASE+ 43) + /* 44 was sys_prof */ +#define __NR_brk (__NR_SYSCALL_BASE+ 45) +#define __NR_setgid (__NR_SYSCALL_BASE+ 46) +#define __NR_getgid (__NR_SYSCALL_BASE+ 47) + /* 48 was sys_signal */ +#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) +#define __NR_getegid (__NR_SYSCALL_BASE+ 50) +#define __NR_acct (__NR_SYSCALL_BASE+ 51) +#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) + /* 53 was sys_lock */ +#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) +#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) + /* 56 was sys_mpx */ +#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) + /* 58 was sys_ulimit */ + /* 59 was sys_olduname */ +#define __NR_umask (__NR_SYSCALL_BASE+ 60) +#define __NR_chroot (__NR_SYSCALL_BASE+ 61) +#define __NR_ustat (__NR_SYSCALL_BASE+ 62) +#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) +#define __NR_getppid (__NR_SYSCALL_BASE+ 64) +#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) +#define __NR_setsid (__NR_SYSCALL_BASE+ 66) +#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) + /* 68 was sys_sgetmask */ + /* 69 was sys_ssetmask */ +#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) +#define __NR_setregid (__NR_SYSCALL_BASE+ 71) +#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) +#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) +#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) +#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) +#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ +#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) +#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) +#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) +#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) +#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) +#define __NR_select (__NR_SYSCALL_BASE+ 82) +#define __NR_symlink (__NR_SYSCALL_BASE+ 83) + /* 84 was sys_lstat */ +#define __NR_readlink (__NR_SYSCALL_BASE+ 85) +#define __NR_uselib (__NR_SYSCALL_BASE+ 86) +#define __NR_swapon (__NR_SYSCALL_BASE+ 87) +#define __NR_reboot (__NR_SYSCALL_BASE+ 88) +#define __NR_readdir (__NR_SYSCALL_BASE+ 89) +#define __NR_mmap (__NR_SYSCALL_BASE+ 90) +#define __NR_munmap (__NR_SYSCALL_BASE+ 91) +#define __NR_truncate (__NR_SYSCALL_BASE+ 92) +#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) +#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) +#define __NR_fchown (__NR_SYSCALL_BASE+ 95) +#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) +#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) + /* 98 was sys_profil */ +#define __NR_statfs (__NR_SYSCALL_BASE+ 99) +#define __NR_fstatfs (__NR_SYSCALL_BASE+100) + /* 101 was sys_ioperm */ +#define __NR_socketcall (__NR_SYSCALL_BASE+102) +#define __NR_syslog (__NR_SYSCALL_BASE+103) +#define __NR_setitimer (__NR_SYSCALL_BASE+104) +#define __NR_getitimer (__NR_SYSCALL_BASE+105) +#define __NR_stat (__NR_SYSCALL_BASE+106) +#define __NR_lstat (__NR_SYSCALL_BASE+107) +#define __NR_fstat (__NR_SYSCALL_BASE+108) + /* 109 was sys_uname */ + /* 110 was sys_iopl */ +#define __NR_vhangup (__NR_SYSCALL_BASE+111) + /* 112 was sys_idle */ +#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ +#define __NR_wait4 (__NR_SYSCALL_BASE+114) +#define __NR_swapoff (__NR_SYSCALL_BASE+115) +#define __NR_sysinfo (__NR_SYSCALL_BASE+116) +#define __NR_ipc (__NR_SYSCALL_BASE+117) +#define __NR_fsync (__NR_SYSCALL_BASE+118) +#define __NR_sigreturn (__NR_SYSCALL_BASE+119) +#define __NR_clone (__NR_SYSCALL_BASE+120) +#define __NR_setdomainname (__NR_SYSCALL_BASE+121) +#define __NR_uname (__NR_SYSCALL_BASE+122) + /* 123 was sys_modify_ldt */ +#define __NR_adjtimex (__NR_SYSCALL_BASE+124) +#define __NR_mprotect (__NR_SYSCALL_BASE+125) +#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) + /* 127 was sys_create_module */ +#define __NR_init_module (__NR_SYSCALL_BASE+128) +#define __NR_delete_module (__NR_SYSCALL_BASE+129) + /* 130 was sys_get_kernel_syms */ +#define __NR_quotactl (__NR_SYSCALL_BASE+131) +#define __NR_getpgid (__NR_SYSCALL_BASE+132) +#define __NR_fchdir (__NR_SYSCALL_BASE+133) +#define __NR_bdflush (__NR_SYSCALL_BASE+134) +#define __NR_sysfs (__NR_SYSCALL_BASE+135) +#define __NR_personality (__NR_SYSCALL_BASE+136) + /* 137 was sys_afs_syscall */ +#define __NR_setfsuid (__NR_SYSCALL_BASE+138) +#define __NR_setfsgid (__NR_SYSCALL_BASE+139) +#define __NR__llseek (__NR_SYSCALL_BASE+140) +#define __NR_getdents (__NR_SYSCALL_BASE+141) +#define __NR__newselect (__NR_SYSCALL_BASE+142) +#define __NR_flock (__NR_SYSCALL_BASE+143) +#define __NR_msync (__NR_SYSCALL_BASE+144) +#define __NR_readv (__NR_SYSCALL_BASE+145) +#define __NR_writev (__NR_SYSCALL_BASE+146) +#define __NR_getsid (__NR_SYSCALL_BASE+147) +#define __NR_fdatasync (__NR_SYSCALL_BASE+148) +#define __NR__sysctl (__NR_SYSCALL_BASE+149) +#define __NR_mlock (__NR_SYSCALL_BASE+150) +#define __NR_munlock (__NR_SYSCALL_BASE+151) +#define __NR_mlockall (__NR_SYSCALL_BASE+152) +#define __NR_munlockall (__NR_SYSCALL_BASE+153) +#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) +#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) +#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) +#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) +#define __NR_sched_yield (__NR_SYSCALL_BASE+158) +#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) +#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) +#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) +#define __NR_nanosleep (__NR_SYSCALL_BASE+162) +#define __NR_mremap (__NR_SYSCALL_BASE+163) +#define __NR_setresuid (__NR_SYSCALL_BASE+164) +#define __NR_getresuid (__NR_SYSCALL_BASE+165) + /* 166 was sys_vm86 */ + /* 167 was sys_query_module */ +#define __NR_poll (__NR_SYSCALL_BASE+168) +#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) +#define __NR_setresgid (__NR_SYSCALL_BASE+170) +#define __NR_getresgid (__NR_SYSCALL_BASE+171) +#define __NR_prctl (__NR_SYSCALL_BASE+172) +#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) +#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) +#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) +#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) +#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) +#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) +#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) +#define __NR_pread64 (__NR_SYSCALL_BASE+180) +#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) +#define __NR_chown (__NR_SYSCALL_BASE+182) +#define __NR_getcwd (__NR_SYSCALL_BASE+183) +#define __NR_capget (__NR_SYSCALL_BASE+184) +#define __NR_capset (__NR_SYSCALL_BASE+185) +#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) +#define __NR_sendfile (__NR_SYSCALL_BASE+187) + /* 188 reserved */ + /* 189 reserved */ +#define __NR_vfork (__NR_SYSCALL_BASE+190) +#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ +#define __NR_mmap2 (__NR_SYSCALL_BASE+192) +#define __NR_truncate64 (__NR_SYSCALL_BASE+193) +#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) +#define __NR_stat64 (__NR_SYSCALL_BASE+195) +#define __NR_lstat64 (__NR_SYSCALL_BASE+196) +#define __NR_fstat64 (__NR_SYSCALL_BASE+197) +#define __NR_lchown32 (__NR_SYSCALL_BASE+198) +#define __NR_getuid32 (__NR_SYSCALL_BASE+199) +#define __NR_getgid32 (__NR_SYSCALL_BASE+200) +#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) +#define __NR_getegid32 (__NR_SYSCALL_BASE+202) +#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) +#define __NR_setregid32 (__NR_SYSCALL_BASE+204) +#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) +#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) +#define __NR_fchown32 (__NR_SYSCALL_BASE+207) +#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) +#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) +#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) +#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) +#define __NR_chown32 (__NR_SYSCALL_BASE+212) +#define __NR_setuid32 (__NR_SYSCALL_BASE+213) +#define __NR_setgid32 (__NR_SYSCALL_BASE+214) +#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) +#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) +#define __NR_getdents64 (__NR_SYSCALL_BASE+217) +#define __NR_pivot_root (__NR_SYSCALL_BASE+218) +#define __NR_mincore (__NR_SYSCALL_BASE+219) +#define __NR_madvise (__NR_SYSCALL_BASE+220) +#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) + /* 222 for tux */ + /* 223 is unused */ +#define __NR_gettid (__NR_SYSCALL_BASE+224) +#define __NR_readahead (__NR_SYSCALL_BASE+225) +#define __NR_setxattr (__NR_SYSCALL_BASE+226) +#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) +#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) +#define __NR_getxattr (__NR_SYSCALL_BASE+229) +#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) +#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) +#define __NR_listxattr (__NR_SYSCALL_BASE+232) +#define __NR_llistxattr (__NR_SYSCALL_BASE+233) +#define __NR_flistxattr (__NR_SYSCALL_BASE+234) +#define __NR_removexattr (__NR_SYSCALL_BASE+235) +#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) +#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) +#define __NR_tkill (__NR_SYSCALL_BASE+238) +#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) +#define __NR_futex (__NR_SYSCALL_BASE+240) +#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) +#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) +#define __NR_io_setup (__NR_SYSCALL_BASE+243) +#define __NR_io_destroy (__NR_SYSCALL_BASE+244) +#define __NR_io_getevents (__NR_SYSCALL_BASE+245) +#define __NR_io_submit (__NR_SYSCALL_BASE+246) +#define __NR_io_cancel (__NR_SYSCALL_BASE+247) +#define __NR_exit_group (__NR_SYSCALL_BASE+248) +#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) +#define __NR_epoll_create (__NR_SYSCALL_BASE+250) +#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) +#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) +#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) + /* 254 for set_thread_area */ + /* 255 for get_thread_area */ +#define __NR_set_tid_address (__NR_SYSCALL_BASE+256) +#define __NR_timer_create (__NR_SYSCALL_BASE+257) +#define __NR_timer_settime (__NR_SYSCALL_BASE+258) +#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) +#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) +#define __NR_timer_delete (__NR_SYSCALL_BASE+261) +#define __NR_clock_settime (__NR_SYSCALL_BASE+262) +#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) +#define __NR_clock_getres (__NR_SYSCALL_BASE+264) +#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) +#define __NR_statfs64 (__NR_SYSCALL_BASE+266) +#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) +#define __NR_tgkill (__NR_SYSCALL_BASE+268) +#define __NR_utimes (__NR_SYSCALL_BASE+269) +#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) +#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) +#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) +#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) +#define __NR_mq_open (__NR_SYSCALL_BASE+274) +#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) +#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) +#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) +#define __NR_mq_notify (__NR_SYSCALL_BASE+278) +#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) +#define __NR_waitid (__NR_SYSCALL_BASE+280) +#define __NR_socket (__NR_SYSCALL_BASE+281) +#define __NR_bind (__NR_SYSCALL_BASE+282) +#define __NR_connect (__NR_SYSCALL_BASE+283) +#define __NR_listen (__NR_SYSCALL_BASE+284) +#define __NR_accept (__NR_SYSCALL_BASE+285) +#define __NR_getsockname (__NR_SYSCALL_BASE+286) +#define __NR_getpeername (__NR_SYSCALL_BASE+287) +#define __NR_socketpair (__NR_SYSCALL_BASE+288) +#define __NR_send (__NR_SYSCALL_BASE+289) +#define __NR_sendto (__NR_SYSCALL_BASE+290) +#define __NR_recv (__NR_SYSCALL_BASE+291) +#define __NR_recvfrom (__NR_SYSCALL_BASE+292) +#define __NR_shutdown (__NR_SYSCALL_BASE+293) +#define __NR_setsockopt (__NR_SYSCALL_BASE+294) +#define __NR_getsockopt (__NR_SYSCALL_BASE+295) +#define __NR_sendmsg (__NR_SYSCALL_BASE+296) +#define __NR_recvmsg (__NR_SYSCALL_BASE+297) +#define __NR_semop (__NR_SYSCALL_BASE+298) +#define __NR_semget (__NR_SYSCALL_BASE+299) +#define __NR_semctl (__NR_SYSCALL_BASE+300) +#define __NR_msgsnd (__NR_SYSCALL_BASE+301) +#define __NR_msgrcv (__NR_SYSCALL_BASE+302) +#define __NR_msgget (__NR_SYSCALL_BASE+303) +#define __NR_msgctl (__NR_SYSCALL_BASE+304) +#define __NR_shmat (__NR_SYSCALL_BASE+305) +#define __NR_shmdt (__NR_SYSCALL_BASE+306) +#define __NR_shmget (__NR_SYSCALL_BASE+307) +#define __NR_shmctl (__NR_SYSCALL_BASE+308) +#define __NR_add_key (__NR_SYSCALL_BASE+309) +#define __NR_request_key (__NR_SYSCALL_BASE+310) +#define __NR_keyctl (__NR_SYSCALL_BASE+311) +#define __NR_semtimedop (__NR_SYSCALL_BASE+312) +#define __NR_vserver (__NR_SYSCALL_BASE+313) +#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) +#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) +#define __NR_inotify_init (__NR_SYSCALL_BASE+316) +#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) +#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) +#define __NR_mbind (__NR_SYSCALL_BASE+319) +#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) +#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) +#define __NR_openat (__NR_SYSCALL_BASE+322) +#define __NR_mkdirat (__NR_SYSCALL_BASE+323) +#define __NR_mknodat (__NR_SYSCALL_BASE+324) +#define __NR_fchownat (__NR_SYSCALL_BASE+325) +#define __NR_futimesat (__NR_SYSCALL_BASE+326) +#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) +#define __NR_unlinkat (__NR_SYSCALL_BASE+328) +#define __NR_renameat (__NR_SYSCALL_BASE+329) +#define __NR_linkat (__NR_SYSCALL_BASE+330) +#define __NR_symlinkat (__NR_SYSCALL_BASE+331) +#define __NR_readlinkat (__NR_SYSCALL_BASE+332) +#define __NR_fchmodat (__NR_SYSCALL_BASE+333) +#define __NR_faccessat (__NR_SYSCALL_BASE+334) +#define __NR_pselect6 (__NR_SYSCALL_BASE+335) +#define __NR_ppoll (__NR_SYSCALL_BASE+336) +#define __NR_unshare (__NR_SYSCALL_BASE+337) +#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) +#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) +#define __NR_splice (__NR_SYSCALL_BASE+340) +#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) +#define __NR_sync_file_range2 __NR_arm_sync_file_range +#define __NR_tee (__NR_SYSCALL_BASE+342) +#define __NR_vmsplice (__NR_SYSCALL_BASE+343) +#define __NR_move_pages (__NR_SYSCALL_BASE+344) +#define __NR_getcpu (__NR_SYSCALL_BASE+345) +#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346) +#define __NR_kexec_load (__NR_SYSCALL_BASE+347) +#define __NR_utimensat (__NR_SYSCALL_BASE+348) +#define __NR_signalfd (__NR_SYSCALL_BASE+349) +#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) +#define __NR_eventfd (__NR_SYSCALL_BASE+351) +#define __NR_fallocate (__NR_SYSCALL_BASE+352) +#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) +#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) +#define __NR_signalfd4 (__NR_SYSCALL_BASE+355) +#define __NR_eventfd2 (__NR_SYSCALL_BASE+356) +#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357) +#define __NR_dup3 (__NR_SYSCALL_BASE+358) +#define __NR_pipe2 (__NR_SYSCALL_BASE+359) +#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) +#define __NR_preadv (__NR_SYSCALL_BASE+361) +#define __NR_pwritev (__NR_SYSCALL_BASE+362) +#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363) +#define __NR_perf_event_open (__NR_SYSCALL_BASE+364) +#define __NR_recvmmsg (__NR_SYSCALL_BASE+365) +#define __NR_accept4 (__NR_SYSCALL_BASE+366) +#define __NR_fanotify_init (__NR_SYSCALL_BASE+367) +#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) +#define __NR_prlimit64 (__NR_SYSCALL_BASE+369) +#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370) +#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) +#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) +#define __NR_syncfs (__NR_SYSCALL_BASE+373) +#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) +#define __NR_setns (__NR_SYSCALL_BASE+375) +#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) +#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) + /* 378 for kcmp */ + +/* + * This may need to be greater than __NR_last_syscall+1 in order to + * account for the padding in the syscall table + */ + +/* + * The following SWIs are ARM private. + */ +#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000) +#define __ARM_NR_breakpoint (__ARM_NR_BASE+1) +#define __ARM_NR_cacheflush (__ARM_NR_BASE+2) +#define __ARM_NR_usr26 (__ARM_NR_BASE+3) +#define __ARM_NR_usr32 (__ARM_NR_BASE+4) +#define __ARM_NR_set_tls (__ARM_NR_BASE+5) + +/* + * *NOTE*: This is a ghost syscall private to the kernel. Only the + * __kuser_cmpxchg code in entry-armv.S should be aware of its + * existence. Don't ever use this from user code. + */ + +/* + * The following syscalls are obsolete and no longer available for EABI. + */ +#if !defined(__KERNEL__) +#if defined(__ARM_EABI__) +#undef __NR_time +#undef __NR_umount +#undef __NR_stime +#undef __NR_alarm +#undef __NR_utime +#undef __NR_getrlimit +#undef __NR_select +#undef __NR_readdir +#undef __NR_mmap +#undef __NR_socketcall +#undef __NR_syscall +#undef __NR_ipc +#endif +#endif + +#endif /* _UAPI__ASM_ARM_UNISTD_H */ diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c8050b14e615..b14207101938 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -19,8 +19,8 @@ config AT91_SAM9G45_RESET config SOC_AT91SAM9 bool - select GENERIC_CLOCKEVENTS select CPU_ARM926T + select GENERIC_CLOCKEVENTS menu "Atmel AT91 System-on-Chip" @@ -28,66 +28,66 @@ comment "Atmel AT91 Processor" config SOC_AT91SAM9 bool + select AT91_SAM9_SMC + select AT91_SAM9_TIME select CPU_ARM926T select MULTI_IRQ_HANDLER select SPARSE_IRQ - select AT91_SAM9_TIME - select AT91_SAM9_SMC config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 + select MULTI_IRQ_HANDLER + select SPARSE_IRQ config SOC_AT91SAM9260 bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_NET_MACB + select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE or AT91SAM9G20 SoC. config SOC_AT91SAM9261 bool "AT91SAM9261 or AT91SAM9G10" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC. config SOC_AT91SAM9263 bool "AT91SAM9263" - select SOC_AT91SAM9 select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL select HAVE_NET_MACB + select SOC_AT91SAM9 config SOC_AT91SAM9RL bool "AT91SAM9RL" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select SOC_AT91SAM9 config SOC_AT91SAM9G45 bool "AT91SAM9G45 or AT91SAM9M10 families" - select SOC_AT91SAM9 select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL select HAVE_NET_MACB + select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9G45 family SoC. This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. config SOC_AT91SAM9X5 bool "AT91SAM9x5 family" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select HAVE_NET_MACB + select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9x5 family SoC. This means that your SAM9 name finishes with a '5' (except if it is @@ -97,9 +97,9 @@ config SOC_AT91SAM9X5 config SOC_AT91SAM9N12 bool "AT91SAM9N12 family" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select SOC_AT91SAM9 help Select this if you are using Atmel's AT91SAM9N12 SoC. @@ -144,9 +144,9 @@ config ARCH_AT91SAM9G45 config ARCH_AT91X40 bool "AT91x40" depends on !MMU + select ARCH_USES_GETTIMEOFFSET select MULTI_IRQ_HANDLER select SPARSE_IRQ - select ARCH_USES_GETTIMEOFFSET endchoice diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index e6135363765a..263242da2cb8 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -23,9 +23,9 @@ config ARCH_CLEP7312 config ARCH_EDB7211 bool "EDB7211" - select ISA - select ARCH_SPARSEMEM_ENABLE select ARCH_SELECT_MEMORY_MODEL + select ARCH_SPARSEMEM_ENABLE + select ISA help Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 evaluation board. diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 026b4b277ae5..f8eecb959413 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,12 +4,12 @@ config AINTC bool config CP_INTC - select IRQ_DOMAIN bool + select IRQ_DOMAIN config ARCH_DAVINCI_DMx - select CPU_ARM926T bool + select CPU_ARM926T menu "TI DaVinci Implementations" @@ -32,19 +32,19 @@ config ARCH_DAVINCI_DM646x config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" - select CP_INTC select ARCH_DAVINCI_DA8XX select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 + select CP_INTC config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" - select CP_INTC select ARCH_DAVINCI_DA8XX select ARCH_HAS_CPUFREQ + select CP_INTC config ARCH_DAVINCI_DA8XX - select CPU_ARM926T bool + select CPU_ARM926T config ARCH_DAVINCI_DM365 bool "DaVinci 365 based system" @@ -52,9 +52,9 @@ config ARCH_DAVINCI_DM365 select ARCH_DAVINCI_DMx config ARCH_DAVINCI_TNETV107X + bool "TNETV107X based system" select CPU_V6 select CP_INTC - bool "TNETV107X based system" comment "DaVinci Board Type" @@ -103,9 +103,9 @@ config MACH_DAVINCI_DM6467_EVM bool "TI DM6467 EVM" default ARCH_DAVINCI_DM646x depends on ARCH_DAVINCI_DM646x - select MACH_DAVINCI_DM6467TEVM select EEPROM_AT24 select I2C + select MACH_DAVINCI_DM6467TEVM help Configure this option to specify the whether the board used for development is a DM6467 EVM @@ -127,8 +127,8 @@ config MACH_DAVINCI_DA830_EVM bool "TI DA830/OMAP-L137/AM17x Reference Platform" default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 - select GPIO_PCF857X select EEPROM_AT24 + select GPIO_PCF857X select I2C help Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 4372075c551f..da55107033dd 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -31,11 +31,11 @@ config CPU_EXYNOS4210 bool "SAMSUNG EXYNOS4210" default y depends on ARCH_EXYNOS4 - select SAMSUNG_DMADEV select ARM_CPU_SUSPEND if PM + select PM_GENERIC_DOMAINS select S5P_PM if PM select S5P_SLEEP if PM - select PM_GENERIC_DOMAINS + select SAMSUNG_DMADEV help Enable EXYNOS4210 CPU support @@ -43,9 +43,9 @@ config SOC_EXYNOS4212 bool "SAMSUNG EXYNOS4212" default y depends on ARCH_EXYNOS4 - select SAMSUNG_DMADEV select S5P_PM if PM select S5P_SLEEP if PM + select SAMSUNG_DMADEV help Enable EXYNOS4212 SoC support @@ -61,9 +61,9 @@ config SOC_EXYNOS5250 bool "SAMSUNG EXYNOS5250" default y depends on ARCH_EXYNOS5 - select SAMSUNG_DMADEV select S5P_PM if PM select S5P_SLEEP if PM + select SAMSUNG_DMADEV help Enable EXYNOS5250 SoC support @@ -189,71 +189,71 @@ config MACH_SMDKC210 config MACH_SMDKV310 bool "SMDKV310" select CPU_EXYNOS4210 - select S5P_DEV_FIMD0 + select EXYNOS4_DEV_AHCI + select EXYNOS4_DEV_USB_OHCI + select EXYNOS4_SETUP_FIMD0 + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_KEYPAD + select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY + select EXYNOS_DEV_DMA + select EXYNOS_DEV_DRM + select EXYNOS_DEV_SYSMMU + select S3C24XX_PWM + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 select S3C_DEV_RTC + select S3C_DEV_USB_HSOTG select S3C_DEV_WDT - select S3C_DEV_I2C1 select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_TV select S5P_DEV_USB_EHCI - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_USB_HSOTG select SAMSUNG_DEV_BACKLIGHT - select EXYNOS_DEV_DRM - select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD - select EXYNOS_DEV_DMA select SAMSUNG_DEV_PWM - select EXYNOS4_DEV_USB_OHCI - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_KEYPAD - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select S3C24XX_PWM help Machine support for Samsung SMDKV310 config MACH_ARMLEX4210 bool "ARMLEX4210" select CPU_EXYNOS4210 - select S3C_DEV_RTC - select S3C_DEV_WDT + select EXYNOS4_DEV_AHCI + select EXYNOS4_SETUP_SDHCI + select EXYNOS_DEV_DMA select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 - select EXYNOS4_DEV_AHCI - select EXYNOS_DEV_DMA - select EXYNOS4_SETUP_SDHCI + select S3C_DEV_RTC + select S3C_DEV_WDT help Machine support for Samsung ARMLEX4210 based on EXYNOS4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" - select CPU_EXYNOS4210 - select S5P_HRT select CLKSRC_MMIO + select CPU_EXYNOS4210 + select EXYNOS4_SETUP_FIMC + select EXYNOS4_SETUP_FIMD0 + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 + select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY + select EXYNOS_DEV_DMA + select EXYNOS_DEV_DRM + select EXYNOS_DEV_SYSMMU select HAVE_SCHED_CLOCK - select S5P_GPIO_INT - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_G2D - select S5P_DEV_CSIS0 - select S5P_DEV_JPEG - select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -261,21 +261,21 @@ config MACH_UNIVERSAL_C210 select S3C_DEV_I2C3 select S3C_DEV_I2C5 select S3C_DEV_USB_HSOTG + select S5P_DEV_CSIS0 + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 + select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_ONENAND select S5P_DEV_TV - select EXYNOS_DEV_SYSMMU - select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C5 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_FIMC + select S5P_GPIO_INT + select S5P_HRT select S5P_SETUP_MIPIPHY - select EXYNOS4_SETUP_USB_PHY help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -283,10 +283,16 @@ config MACH_UNIVERSAL_C210 config MACH_NURI bool "Mobile NURI Board" select CPU_EXYNOS4210 - select S5P_GPIO_INT - select S3C_DEV_WDT - select S3C_DEV_RTC - select S5P_DEV_FIMD0 + select EXYNOS4_SETUP_FIMC + select EXYNOS4_SETUP_FIMD0 + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 + select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_I2C6 + select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY + select EXYNOS_DEV_DMA + select EXYNOS_DEV_DRM select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -294,41 +300,42 @@ config MACH_NURI select S3C_DEV_I2C3 select S3C_DEV_I2C5 select S3C_DEV_I2C6 + select S3C_DEV_RTC select S3C_DEV_USB_HSOTG + select S3C_DEV_WDT select S5P_DEV_CSIS0 - select S5P_DEV_JPEG select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 select S5P_DEV_G2D + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_USB_EHCI + select S5P_GPIO_INT select S5P_SETUP_MIPIPHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM - select EXYNOS4_SETUP_FIMC - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C5 - select EXYNOS4_SETUP_I2C6 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select S5P_SETUP_MIPIPHY - select SAMSUNG_DEV_PWM select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM help Machine support for Samsung Mobile NURI Board. config MACH_ORIGEN bool "ORIGEN" select CPU_EXYNOS4210 - select S3C_DEV_RTC - select S3C_DEV_WDT + select EXYNOS4_DEV_USB_OHCI + select EXYNOS4_SETUP_FIMD0 + select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY + select EXYNOS_DEV_DMA + select EXYNOS_DEV_DRM + select EXYNOS_DEV_SYSMMU + select S3C24XX_PWM select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 + select S3C_DEV_RTC select S3C_DEV_USB_HSOTG + select S3C_DEV_WDT select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 @@ -342,14 +349,6 @@ config MACH_ORIGEN select S5P_DEV_USB_EHCI select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM - select EXYNOS_DEV_DRM - select EXYNOS_DEV_SYSMMU - select EXYNOS_DEV_DMA - select EXYNOS4_DEV_USB_OHCI - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select S3C24XX_PWM help Machine support for ORIGEN based on Samsung EXYNOS4210 @@ -357,7 +356,17 @@ comment "EXYNOS4212 Boards" config MACH_SMDK4212 bool "SMDK4212" - select SOC_EXYNOS4212 + select EXYNOS4_SETUP_FIMD0 + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 + select EXYNOS4_SETUP_I2C7 + select EXYNOS4_SETUP_KEYPAD + select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY + select EXYNOS_DEV_DMA + select EXYNOS_DEV_DRM + select EXYNOS_DEV_SYSMMU + select S3C24XX_PWM select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 @@ -375,17 +384,7 @@ config MACH_SMDK4212 select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM - select EXYNOS_DEV_SYSMMU - select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C7 - select EXYNOS4_SETUP_KEYPAD - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select S3C24XX_PWM + select SOC_EXYNOS4212 help Machine support for Samsung SMDK4212 @@ -393,8 +392,8 @@ comment "EXYNOS4412 Boards" config MACH_SMDK4412 bool "SMDK4412" - select SOC_EXYNOS4412 select MACH_SMDK4212 + select SOC_EXYNOS4412 help Machine support for Samsung SMDK4412 endif @@ -404,12 +403,12 @@ comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" depends on ARCH_EXYNOS4 - select CPU_EXYNOS4210 - select USE_OF select ARM_AMBA + select CPU_EXYNOS4210 select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD select PINCTRL select PINCTRL_EXYNOS4 + select USE_OF help Machine support for Samsung Exynos4 machine with device tree enabled. Select this if a fdt blob is available for the Exynos4 SoC based board. @@ -419,9 +418,9 @@ config MACH_EXYNOS4_DT config MACH_EXYNOS5_DT bool "SAMSUNG EXYNOS5 Machine using device tree" depends on ARCH_EXYNOS5 + select ARM_AMBA select SOC_EXYNOS5250 select USE_OF - select ARM_AMBA help Machine support for Samsung EXYNOS5 machine with device tree enabled. Select this if a fdt blob is available for the EXYNOS5 SoC based board. diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index f643ef819da6..abda5a18a664 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -91,7 +91,7 @@ config FOOTBRIDGE_ADDIN # EBSA285 board in either host or addin mode config ARCH_EBSA285 - select ARCH_MAY_HAVE_PC_FDC bool + select ARCH_MAY_HAVE_PC_FDC endif diff --git a/arch/arm/mach-h720x/Kconfig b/arch/arm/mach-h720x/Kconfig index abf356c02343..6bb755bcb6f5 100644 --- a/arch/arm/mach-h720x/Kconfig +++ b/arch/arm/mach-h720x/Kconfig @@ -12,9 +12,9 @@ config ARCH_H7201 config ARCH_H7202 bool "hms30c7202" + depends on ARCH_H720X select CPU_H7202 select ZONE_DMA - depends on ARCH_H720X help Say Y here if you are using the Hynix HMS30C7202 Reference Board diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 32197c117afe..8d276584650e 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -41,68 +41,68 @@ config SOC_IMX1 config SOC_IMX21 bool - select MACH_MX21 - select CPU_ARM926T select COMMON_CLK + select CPU_ARM926T select IMX_HAVE_IOMUX_V1 + select MACH_MX21 select MXC_AVIC config SOC_IMX25 bool select ARCH_MX25 + select ARCH_MXC_IOMUX_V3 select COMMON_CLK select CPU_ARM926T select HAVE_CAN_FLEXCAN if CAN - select ARCH_MXC_IOMUX_V3 select MXC_AVIC config SOC_IMX27 bool - select MACH_MX27 - select CPU_ARM926T select COMMON_CLK + select CPU_ARM926T select IMX_HAVE_IOMUX_V1 + select MACH_MX27 select MXC_AVIC config SOC_IMX31 bool + select COMMON_CLK select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA select MXC_AVIC - select COMMON_CLK select SMP_ON_UP if SMP config SOC_IMX35 bool - select CPU_V6K select ARCH_MXC_IOMUX_V3 select COMMON_CLK + select CPU_V6K + select HAVE_CAN_FLEXCAN if CAN select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP - select HAVE_CAN_FLEXCAN if CAN config SOC_IMX5 - select CPU_V7 - select MXC_TZIC - select COMMON_CLK - select ARCH_MXC_IOMUX_V3 + bool select ARCH_HAS_CPUFREQ select ARCH_MX5 - bool + select ARCH_MXC_IOMUX_V3 + select COMMON_CLK + select CPU_V7 + select MXC_TZIC config SOC_IMX50 bool - select SOC_IMX5 select ARCH_MX50 + select SOC_IMX5 config SOC_IMX51 bool - select SOC_IMX5 select ARCH_MX5 select ARCH_MX51 select PINCTRL select PINCTRL_IMX51 + select SOC_IMX5 if ARCH_IMX_V4_V5 @@ -112,10 +112,10 @@ config MACH_MXLADS config ARCH_MX1ADS bool "MX1ADS platform" - select MACH_MXLADS - select SOC_IMX1 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select MACH_MXLADS + select SOC_IMX1 help Say Y here if you are using Motorola MX1ADS/MXLADS boards @@ -127,9 +127,9 @@ config MACH_SCB9328 config MACH_APF9328 bool "APF9328" - select SOC_IMX1 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX1 help Say Yes here if you are using the Armadeus APF9328 development board @@ -137,11 +137,11 @@ comment "MX21 platforms:" config MACH_MX21ADS bool "MX21ADS platform" - select SOC_IMX21 select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND + select SOC_IMX21 help Include support for MX21ADS platform. This includes specific configurations for the board and its peripherals. @@ -150,22 +150,21 @@ comment "MX25 platforms:" config MACH_MX25_3DS bool "Support MX25PDK (3DS) Platform" - select SOC_IMX25 select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC - select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select SOC_IMX25 config MACH_EUKREA_CPUIMX25SD bool "Support Eukrea CPUIMX25 Platform" - select SOC_IMX25 select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT @@ -177,6 +176,7 @@ config MACH_EUKREA_CPUIMX25SD select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select MXC_ULPI if USB_ULPI + select SOC_IMX25 choice prompt "Baseboard" @@ -199,20 +199,19 @@ comment "MX27 platforms:" config MACH_MX27ADS bool "MX27ADS platform" - select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 + select SOC_IMX27 help Include support for MX27ADS platform. This includes specific configurations for the board and its peripherals. config MACH_PCM038 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" - select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART @@ -221,6 +220,7 @@ config MACH_PCM038 select IMX_HAVE_PLATFORM_MXC_W1 select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI + select SOC_IMX27 help Include support for phyCORE-i.MX27 (aka pcm038) platform. This includes specific configurations for the module and its peripherals. @@ -242,7 +242,6 @@ endchoice config MACH_CPUIMX27 bool "Eukrea CPUIMX27 module" - select SOC_IMX27 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C @@ -251,6 +250,7 @@ config MACH_CPUIMX27 select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select MXC_ULPI if USB_ULPI + select SOC_IMX27 help Include support for Eukrea CPUIMX27 platform. This includes specific configurations for the module and its peripherals. @@ -292,7 +292,6 @@ endchoice config MACH_MX27_3DS bool "MX27PDK platform" - select SOC_IMX27 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_FB @@ -306,13 +305,13 @@ config MACH_MX27_3DS select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD select MXC_ULPI if USB_ULPI + select SOC_IMX27 help Include support for MX27PDK platform. This includes specific configurations for the board and its peripherals. config MACH_IMX27_VISSTRIM_M10 bool "Vista Silicon i.MX27 Visstrim_m10" - select SOC_IMX27 select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI @@ -321,6 +320,7 @@ config MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select LEDS_GPIO_REGISTER + select SOC_IMX27 help Include support for Visstrim_m10 platform and its different variants. This includes specific configurations for the board and its @@ -328,16 +328,15 @@ config MACH_IMX27_VISSTRIM_M10 config MACH_IMX27LITE bool "LogicPD MX27 LITEKIT platform" - select SOC_IMX27 - select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX27 help Include support for MX27 LITEKIT platform. This includes specific configurations for the board and its peripherals. config MACH_PCA100 bool "Phytec phyCARD-s (pca100)" - select SOC_IMX27 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_FB @@ -350,27 +349,28 @@ config MACH_PCA100 select IMX_HAVE_PLATFORM_MXC_W1 select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI + select SOC_IMX27 help Include support for phyCARD-s (aka pca100) platform. This includes specific configurations for the module and its peripherals. config MACH_MXT_TD60 bool "Maxtrack i-MXT TD60" - select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND + select SOC_IMX27 help Include support for i-MXT (aka td60) platform. This includes specific configurations for the module and its peripherals. config MACH_IMX27IPCAM bool "IMX27 IPCAM platform" - select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX27 help Include support for IMX27 IPCAM platform. This includes specific configurations for the board and its peripherals. @@ -390,11 +390,11 @@ comment "MX31 platforms:" config MACH_MX31ADS bool "Support MX31ADS platforms" - select SOC_IMX31 + default y select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART - default y + select SOC_IMX31 help Include support for MX31ADS platform. This includes specific configurations for the board and its peripherals. @@ -412,21 +412,19 @@ config MACH_MX31ADS_WM1133_EV1 config MACH_MX31LILLY bool "Support MX31 LILLY-1131 platforms (INCO startec)" - select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI + select SOC_IMX31 help Include support for mx31 based LILLY1131 modules. This includes specific configurations for the board and its peripherals. config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" - select SOC_IMX31 - select MXC_ULPI if USB_ULPI select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI @@ -435,13 +433,14 @@ config MACH_MX31LITE select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER + select MXC_ULPI if USB_ULPI + select SOC_IMX31 help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. config MACH_PCM037 bool "Support Phytec pcm037 (i.MX31) platforms" - select SOC_IMX31 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C @@ -452,6 +451,7 @@ config MACH_PCM037 select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select MXC_ULPI if USB_ULPI + select SOC_IMX31 help Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. @@ -468,8 +468,6 @@ config MACH_PCM037_EET config MACH_MX31_3DS bool "Support MX31PDK (3DS)" - select SOC_IMX31 - select MXC_DEBUG_BOARD select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C @@ -481,7 +479,9 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_DEBUG_BOARD select MXC_ULPI if USB_ULPI + select SOC_IMX31 help Include support for MX31PDK (3DS) platform. This includes specific configurations for the board and its peripherals. @@ -497,7 +497,6 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" - select SOC_IMX31 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C @@ -509,22 +508,22 @@ config MACH_MX31MOBOARD select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER select MXC_ULPI if USB_ULPI + select SOC_IMX31 help Include support for mx31moboard platform. This includes specific configurations for the board and its peripherals. config MACH_QONG bool "Support Dave/DENX QongEVB-LITE platform" - select SOC_IMX31 - select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 help Include support for Dave/DENX QongEVB-LITE platform. This includes specific configurations for the board and its peripherals. config MACH_ARMADILLO5X0 bool "Support Atmark Armadillo-500 Development Base Board" - select SOC_IMX31 select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART @@ -533,23 +532,24 @@ config MACH_ARMADILLO5X0 select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select MXC_ULPI if USB_ULPI + select SOC_IMX31 help Include support for Atmark Armadillo-500 platform. This includes specific configurations for the board and its peripherals. config MACH_KZM_ARM11_01 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" - select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 help Include support for KZM-ARM11-01. This includes specific configurations for the board and its peripherals. config MACH_BUG bool "Support Buglabs BUGBase platform" - select SOC_IMX31 - select IMX_HAVE_PLATFORM_IMX_UART default y + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 help Include support for BUGBase 1.3 platform. This includes specific configurations for the board and its peripherals. @@ -565,7 +565,6 @@ comment "MX35 platforms:" config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" - select SOC_IMX35 select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT @@ -577,14 +576,13 @@ config MACH_PCM043 select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select MXC_ULPI if USB_ULPI + select SOC_IMX35 help Include support for Phytec pcm043 platform. This includes specific configurations for the board and its peripherals. config MACH_MX35_3DS bool "Support MX35PDK platform" - select SOC_IMX35 - select MXC_DEBUG_BOARD select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_FB @@ -595,13 +593,14 @@ config MACH_MX35_3DS select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select MXC_DEBUG_BOARD + select SOC_IMX35 help Include support for MX35PDK platform. This includes specific configurations for the board and its peripherals. config MACH_EUKREA_CPUIMX35SD bool "Support Eukrea CPUIMX35 Platform" - select SOC_IMX35 select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT @@ -611,6 +610,7 @@ config MACH_EUKREA_CPUIMX35SD select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select MXC_ULPI if USB_ULPI + select SOC_IMX35 help Include support for Eukrea CPUIMX35 platform. This includes specific configurations for the board and its peripherals. @@ -635,16 +635,16 @@ endchoice config MACH_VPR200 bool "Support VPR200 platform" - select SOC_IMX35 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select SOC_IMX35 help Include support for VPR200 platform. This includes specific configurations for the board and its peripherals. @@ -654,11 +654,11 @@ comment "i.MX5 platforms:" config MACH_MX50_RDP bool "Support MX50 reference design platform" depends on BROKEN - select SOC_IMX50 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + select SOC_IMX50 help Include support for MX50 reference design platform (RDP) board. This includes specific configurations for the board and its peripherals. @@ -667,15 +667,14 @@ comment "i.MX51 machines:" config MACH_IMX51_DT bool "Support i.MX51 platforms from device tree" - select SOC_IMX51 select MACH_MX51_BABBAGE + select SOC_IMX51 help Include support for Freescale i.MX51 based platforms using the device tree for discovery config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" - select SOC_IMX51 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C @@ -683,6 +682,7 @@ config MACH_MX51_BABBAGE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + select SOC_IMX51 help Include support for MX51 Babbage platform, also known as MX51EVK in u-boot. This includes specific configurations for the board and its @@ -690,27 +690,27 @@ config MACH_MX51_BABBAGE config MACH_MX51_3DS bool "Support MX51PDK (3DS)" - select SOC_IMX51 select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD + select SOC_IMX51 help Include support for MX51PDK (3DS) platform. This includes specific configurations for the board and its peripherals. config MACH_EUKREA_CPUIMX51SD bool "Support Eukrea CPUIMX51SD module" - select SOC_IMX51 select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX + select SOC_IMX51 help Include support for Eukrea CPUIMX51SD platform. This includes specific configurations for the module and its peripherals. @@ -736,12 +736,12 @@ comment "Device tree only" config SOC_IMX53 bool "i.MX53 support" - select SOC_IMX5 select ARCH_MX5 select ARCH_MX53 select HAVE_CAN_FLEXCAN if CAN select PINCTRL select PINCTRL_IMX53 + select SOC_IMX5 help This enables support for Freescale i.MX53 processor. diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index fd5e7b6881bf..73a2d905af8a 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -234,8 +234,8 @@ config IXP4XX_QMGR config IXP4XX_NPE tristate "IXP4xx Network Processor Engine support" - select HOTPLUG select FW_LOADER + select HOTPLUG help This driver supports IXP4xx built-in network coprocessors and is automatically selected by Ethernet and HSS drivers. diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index d697d07a1bf0..178d4daa5e1d 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -107,22 +107,22 @@ endmenu config CPU_PXA168 bool - select CPU_MOHAWK select COMMON_CLK + select CPU_MOHAWK help Select code specific to PXA168 config CPU_PXA910 bool - select CPU_MOHAWK select COMMON_CLK + select CPU_MOHAWK help Select code specific to PXA910 config CPU_MMP2 bool - select CPU_PJ4 select COMMON_CLK + select CPU_PJ4 help Select code specific to MMP2. MMP2 is ARMv7 compatible. diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 7902de151cc5..b61908594b47 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -10,35 +10,35 @@ choice config ARCH_MSM7X00A bool "MSM7x00A / MSM7x01A" - select MACH_TROUT if !MACH_HALIBUT select ARCH_MSM_ARM11 - select MSM_SMD - select MSM_SMD_PKG3 select CPU_V6 select GPIO_MSM_V1 + select MACH_TROUT if !MACH_HALIBUT select MSM_PROC_COMM + select MSM_SMD + select MSM_SMD_PKG3 config ARCH_MSM7X30 bool "MSM7x30" - select MACH_MSM7X30_SURF # if ! select ARCH_MSM_SCORPION - select MSM_SMD - select MSM_VIC select CPU_V7 - select MSM_GPIOMUX select GPIO_MSM_V1 + select MACH_MSM7X30_SURF # if ! + select MSM_GPIOMUX select MSM_PROC_COMM + select MSM_SMD + select MSM_VIC config ARCH_QSD8X50 bool "QSD8X50" - select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5 select ARCH_MSM_SCORPION - select MSM_SMD - select MSM_VIC select CPU_V7 - select MSM_GPIOMUX select GPIO_MSM_V1 + select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5 + select MSM_GPIOMUX select MSM_PROC_COMM + select MSM_SMD + select MSM_VIC endchoice @@ -47,10 +47,10 @@ config ARCH_MSM8X60 select ARCH_MSM_SCORPIONMP select ARM_GIC select CPU_V7 - select MSM_V2_TLMM select GPIO_MSM_V2 select MSM_GPIOMUX select MSM_SCM if SMP + select MSM_V2_TLMM select USE_OF config ARCH_MSM8960 @@ -58,9 +58,9 @@ config ARCH_MSM8960 select ARCH_MSM_SCORPIONMP select ARM_GIC select CPU_V7 - select MSM_V2_TLMM select MSM_GPIOMUX select MSM_SCM if SMP + select MSM_V2_TLMM select USE_OF config MSM_HAS_DEBUG_UART_HS @@ -110,8 +110,8 @@ config MACH_QSD8X50_SURF config MACH_QSD8X50A_ST1_5 depends on ARCH_QSD8X50 - select MSM_SOC_REV_A bool "QSD8x50A ST1.5" + select MSM_SOC_REV_A help Support for the Qualcomm ST1.5. diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 365879b47c0e..c744946ef022 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -4,8 +4,8 @@ menu "Nomadik boards" config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" - select NOMADIK_8815 select HAS_MTU + select NOMADIK_8815 endmenu @@ -16,7 +16,7 @@ config I2C_BITBANG_8815NHK tristate "Driver for bit-bang busses found on the 8815 NHK" depends on I2C && MACH_NOMADIK_8815NHK depends on PINCTRL_NOMADIK - select I2C_ALGOBIT default y + select I2C_ALGOBIT endif diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index cba3f7191cfc..903da8eb886c 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -8,15 +8,15 @@ comment "OMAP Core Type" config ARCH_OMAP730 depends on ARCH_OMAP1 bool "OMAP730 Based System" + select ARCH_OMAP_OTG select CPU_ARM926T select OMAP_MPU_TIMER - select ARCH_OMAP_OTG config ARCH_OMAP850 depends on ARCH_OMAP1 bool "OMAP850 Based System" - select CPU_ARM926T select ARCH_OMAP_OTG + select CPU_ARM926T config ARCH_OMAP15XX depends on ARCH_OMAP1 @@ -28,8 +28,8 @@ config ARCH_OMAP15XX config ARCH_OMAP16XX depends on ARCH_OMAP1 bool "OMAP16xx Based System" - select CPU_ARM926T select ARCH_OMAP_OTG + select CPU_ARM926T comment "OMAP Board Type" depends on ARCH_OMAP1 @@ -132,8 +132,8 @@ config MACH_OMAP_PALMTT config MACH_SX1 bool "Siemens SX1" - select I2C depends on ARCH_OMAP1 && ARCH_OMAP15XX + select I2C help Support for the Siemens SX1 phone. To boot the kernel, you'll need a SX1 compatible bootloader; check out diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a6219eaf1f68..2a1a898c7f90 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -6,19 +6,19 @@ config ARCH_OMAP2PLUS_TYPICAL bool "Typical OMAP configuration" default y select AEABI - select REGULATOR - select PM_RUNTIME - select VFP - select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 - select SERIAL_OMAP - select SERIAL_OMAP_CONSOLE + select HIGHMEM select I2C select I2C_OMAP select MENELAUS if ARCH_OMAP2 + select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 + select PINCTRL + select PM_RUNTIME + select REGULATOR + select SERIAL_OMAP + select SERIAL_OMAP_CONSOLE select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 - select HIGHMEM - select PINCTRL + select VFP help Compile a kernel suitable for booting most boards @@ -40,44 +40,44 @@ config ARCH_OMAP3 bool "TI OMAP3" depends on ARCH_OMAP2PLUS default y - select CPU_V7 - select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARCH_HAS_OPP - select PM_RUNTIME if CPU_IDLE - select PM_OPP if PM select ARM_CPU_SUSPEND if PM + select CPU_V7 select MULTI_IRQ_HANDLER - select SOC_HAS_OMAP2_SDRC select OMAP_INTERCONNECT + select PM_OPP if PM + select PM_RUNTIME if CPU_IDLE + select SOC_HAS_OMAP2_SDRC + select USB_ARCH_HAS_EHCI if USB_SUPPORT config ARCH_OMAP4 bool "TI OMAP4" default y depends on ARCH_OMAP2PLUS + select ARCH_HAS_OPP + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP + select ARM_CPU_SUSPEND if PM + select ARM_ERRATA_720789 + select ARM_GIC select CACHE_L2X0 select CPU_V7 - select ARM_GIC select HAVE_SMP select LOCAL_TIMERS if SMP + select OMAP_INTERCONNECT select PL310_ERRATA_588369 select PL310_ERRATA_727915 - select ARM_ERRATA_720789 - select ARCH_HAS_OPP - select PM_RUNTIME if CPU_IDLE select PM_OPP if PM + select PM_RUNTIME if CPU_IDLE select USB_ARCH_HAS_EHCI if USB_SUPPORT - select ARM_CPU_SUSPEND if PM - select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP - select OMAP_INTERCONNECT config SOC_OMAP5 bool "TI OMAP5" - select CPU_V7 + select ARM_ARCH_TIMER + select ARM_CPU_SUSPEND if PM select ARM_GIC + select CPU_V7 select HAVE_SMP - select ARM_CPU_SUSPEND if PM select SOC_HAS_REALTIME_COUNTER - select ARM_ARCH_TIMER comment "OMAP Core Type" depends on ARCH_OMAP2 @@ -109,8 +109,8 @@ config SOC_TI81XX config SOC_AM33XX bool "AM33XX support" default y - select CPU_V7 select ARM_CPU_SUSPEND if PM + select CPU_V7 select MULTI_IRQ_HANDLER config OMAP_PACKAGE_ZAF @@ -157,8 +157,8 @@ config MACH_OMAP_H4 bool "OMAP 2420 H4 board" depends on SOC_OMAP2420 default y - select OMAP_PACKAGE_ZAF select OMAP_DEBUG_DEVICES + select OMAP_PACKAGE_ZAF config MACH_OMAP_APOLLON bool "OMAP 2420 Apollon board" @@ -193,8 +193,8 @@ config MACH_OMAP_LDP config MACH_OMAP3530_LV_SOM bool "OMAP3 Logic 3530 LV SOM board" depends on ARCH_OMAP3 - select OMAP_PACKAGE_CBB default y + select OMAP_PACKAGE_CBB help Support for the LogicPD OMAP3530 SOM Development kit for full description please see the products webpage at @@ -203,8 +203,8 @@ config MACH_OMAP3530_LV_SOM config MACH_OMAP3_TORPEDO bool "OMAP3 Logic 35x Torpedo board" depends on ARCH_OMAP3 - select OMAP_PACKAGE_CBB default y + select OMAP_PACKAGE_CBB help Support for the LogicPD OMAP35x Torpedo Development kit for full description please see the products webpage at @@ -265,17 +265,17 @@ config MACH_NOKIA_N8X0 bool "Nokia N800/N810" depends on SOC_OMAP2420 default y - select OMAP_PACKAGE_ZAC select MACH_NOKIA_N800 select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX + select OMAP_PACKAGE_ZAC config MACH_NOKIA_RM680 bool "Nokia RM-680/696 board" depends on ARCH_OMAP3 default y - select OMAP_PACKAGE_CBB select MACH_NOKIA_RM696 + select OMAP_PACKAGE_CBB config MACH_NOKIA_RX51 bool "Nokia RX-51 board" @@ -288,20 +288,20 @@ config MACH_OMAP_ZOOM2 depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select REGULATOR_FIXED_VOLTAGE if REGULATOR select SERIAL_8250 - select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SERIAL_CORE_CONSOLE config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBP + select REGULATOR_FIXED_VOLTAGE if REGULATOR select SERIAL_8250 - select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SERIAL_CORE_CONSOLE config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" @@ -329,8 +329,8 @@ config MACH_IGEP0030 bool "IGEP OMAP3 module" depends on ARCH_OMAP3 default y - select OMAP_PACKAGE_CBB select MACH_IGEP0020 + select OMAP_PACKAGE_CBB config MACH_SBC3530 bool "OMAP3 SBC STALKER board" diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 41fc85327673..558ccfb8d458 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -6,8 +6,8 @@ config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" default y select CPU_V7 - select ZONE_DMA select SIRF_IRQ + select ZONE_DMA help Support for CSR SiRFSoC ARM Cortex A9 Platform diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 8e6288de69b9..11aa7399dc09 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -27,10 +27,10 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" config MACH_PXA3XX_DT bool "Support PXA3xx platforms from device tree" - select PXA3xx select CPU_PXA300 - select POWER_SUPPLY select HAVE_PWM + select POWER_SUPPLY + select PXA3xx select USE_OF help Include support for Marvell PXA3xx based platforms using @@ -44,13 +44,13 @@ config ARCH_LUBBOCK config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" - select PXA27x select HAVE_PWM + select PXA27x config MACH_ZYLONITE bool - select PXA3xx select HAVE_PWM + select PXA3xx config MACH_ZYLONITE300 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" @@ -65,19 +65,19 @@ config MACH_ZYLONITE320 config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" - select PXA3xx select CPU_PXA300 select CPU_PXA310 + select PXA3xx config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" - select PXA3xx select CPU_PXA930 + select PXA3xx config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" - select PXA3xx select CPU_PXA930 + select PXA3xx comment "Third Party Dev Platforms (sorted by vendor name)" @@ -87,29 +87,29 @@ config ARCH_PXA_IDP config ARCH_VIPER bool "Arcom/Eurotech VIPER SBC" - select PXA25x - select ISA - select I2C_GPIO + select ARCOM_PCMCIA select HAVE_PWM + select I2C_GPIO + select ISA + select PXA25x select PXA_HAVE_ISA_IRQS - select ARCOM_PCMCIA config MACH_ARCOM_ZEUS bool "Arcom/Eurotech ZEUS SBC" - select PXA27x + select ARCOM_PCMCIA select ISA + select PXA27x select PXA_HAVE_ISA_IRQS - select ARCOM_PCMCIA config MACH_BALLOON3 bool "Balloon 3 board" - select PXA27x select IWMMXT + select PXA27x config MACH_CSB726 bool "Enable Cogent CSB726 System On a Module" - select PXA27x select IWMMXT + select PXA27x help Say Y here if you intend to run this kernel on a Cogent CSB726 System On Module. @@ -121,11 +121,11 @@ config CSB726_CSB701 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI - select PXA27x select IWMMXT - select PXA25x select MIGHT_HAVE_PCI select NEED_MACH_IO_H if PCI + select PXA25x + select PXA27x config MACH_EM_X270 bool "CompuLab EM-x270 platform" @@ -137,10 +137,10 @@ config MACH_EXEDA config MACH_CM_X300 bool "CompuLab CM-X300 modules" - select PXA3xx select CPU_PXA300 select CPU_PXA310 select HAVE_PWM + select PXA3xx config MACH_CAPC7117 bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" @@ -168,22 +168,22 @@ endchoice config MACH_INTELMOTE2 bool "Intel Mote 2 Platform" - select PXA27x select IWMMXT + select PXA27x config MACH_STARGATE2 bool "Intel Stargate 2 Platform" - select PXA27x select IWMMXT + select PXA27x config MACH_XCEP bool "Iskratel Electronics XCEP" - select PXA25x select MTD - select MTD_PHYSMAP - select MTD_CFI_INTELEXT select MTD_CFI + select MTD_CFI_INTELEXT select MTD_CHAR + select MTD_PHYSMAP + select PXA25x select SMC91X help PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. @@ -195,14 +195,14 @@ config TRIZEPS_PXA config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" depends on TRIZEPS_PXA - select TRIZEPS_PCMCIA select PXA27x + select TRIZEPS_PCMCIA config MACH_TRIZEPS4WL bool "Keith und Koep Trizeps4-WL DIMM-Module" depends on TRIZEPS_PXA - select TRIZEPS_PCMCIA select PXA27x + select TRIZEPS_PCMCIA choice prompt "Select base board for Trizeps module" @@ -231,18 +231,18 @@ config TRIZEPS_PCMCIA config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" - select PXA27x select HAVE_PWM + select PXA27x config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" - select PXA27x select IWMMXT + select PXA27x config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" - select HAVE_PWM depends on MACH_PCM027 + select HAVE_PWM choice prompt "display on pcm990" @@ -266,19 +266,19 @@ config MACH_COLIBRI config MACH_COLIBRI_PXA270_INCOME bool "Income s.r.o. PXA270 SBC" depends on MACH_COLIBRI - select PXA27x select HAVE_PWM + select PXA27x config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" - select PXA3xx select CPU_PXA300 select CPU_PXA310 + select PXA3xx config MACH_COLIBRI320 bool "Toradex Colibri PXA320" - select PXA3xx select CPU_PXA320 + select PXA3xx config MACH_COLIBRI_EVALBOARD bool "Toradex Colibri Evaluation Carrier Board support" @@ -286,8 +286,8 @@ config MACH_COLIBRI_EVALBOARD config MACH_VPAC270 bool "Voipac PXA270" - select PXA27x select HAVE_PATA_PLATFORM + select PXA27x help PXA270 based Single Board Computer. @@ -295,9 +295,9 @@ comment "End-user Products (sorted by vendor name)" config MACH_H4700 bool "HP iPAQ hx4700" - select PXA27x - select IWMMXT select HAVE_PWM + select IWMMXT + select PXA27x config MACH_H5000 bool "HP iPAQ h5000" @@ -309,16 +309,16 @@ config MACH_HIMALAYA config MACH_MAGICIAN bool "Enable HTC Magician Support" - select PXA27x - select IWMMXT select HAVE_PWM + select IWMMXT + select PXA27x config MACH_MIOA701 bool "Mitac Mio A701 Support" - select PXA27x - select IWMMXT - select HAVE_PWM select GPIO_SYSFS + select HAVE_PWM + select IWMMXT + select PXA27x help Say Y here if you intend to run this kernel on a MIO A701. Currently there is only basic support @@ -326,9 +326,9 @@ config MACH_MIOA701 config PXA_EZX bool "Motorola EZX Platform" - select PXA27x - select IWMMXT select HAVE_PWM + select IWMMXT + select PXA27x config MACH_EZX_A780 bool "Motorola EZX A780" @@ -393,9 +393,9 @@ config MACH_PALMT5 bool "Palm Tungsten|T5" default y depends on ARCH_PXA_PALM - select PXA27x select IWMMXT select MACH_PALM27X + select PXA27x help Say Y here if you intend to run this kernel on a Palm Tungsten|T5 handheld computer. @@ -404,9 +404,9 @@ config MACH_PALMTX bool "Palm T|X" default y depends on ARCH_PXA_PALM - select PXA27x select IWMMXT select MACH_PALM27X + select PXA27x help Say Y here if you intend to run this kernel on a Palm T|X handheld computer. @@ -415,9 +415,9 @@ config MACH_PALMZ72 bool "Palm Zire 72" default y depends on ARCH_PXA_PALM - select PXA27x select IWMMXT select MACH_PALM27X + select PXA27x help Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. @@ -426,9 +426,9 @@ config MACH_PALMLD bool "Palm LifeDrive" default y depends on ARCH_PXA_PALM - select PXA27x select IWMMXT select MACH_PALM27X + select PXA27x help Say Y here if you intend to run this kernel on a Palm LifeDrive handheld computer. @@ -441,10 +441,10 @@ config MACH_CENTRO bool "Palm Centro 685 (GSM)" default y depends on ARCH_PXA_PALM - select MACH_PALM27X - select PXA27x select IWMMXT + select MACH_PALM27X select PALM_TREO + select PXA27x help Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) smartphone. @@ -453,37 +453,37 @@ config MACH_TREO680 bool "Palm Treo 680" default y depends on ARCH_PXA_PALM - select MACH_PALM27X - select PXA27x select IWMMXT + select MACH_PALM27X select PALM_TREO + select PXA27x help Say Y here if you intend to run this kernel on Palm Treo 680 smartphone. config MACH_RAUMFELD_RC bool "Raumfeld Controller" - select PXA3xx select CPU_PXA300 - select POWER_SUPPLY select HAVE_PWM + select POWER_SUPPLY + select PXA3xx config MACH_RAUMFELD_CONNECTOR bool "Raumfeld Connector" + select CPU_PXA300 select POWER_SUPPLY select PXA3xx - select CPU_PXA300 config MACH_RAUMFELD_SPEAKER bool "Raumfeld Speaker" + select CPU_PXA300 select POWER_SUPPLY select PXA3xx - select CPU_PXA300 config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" - select SHARP_SCOOP select SHARP_PARAM + select SHARP_SCOOP help Say Y here if you intend to run this kernel on a Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), @@ -526,11 +526,11 @@ config MACH_HUSKY config MACH_AKITA bool "Enable Sharp SL-1000 (Akita) Support" depends on PXA_SHARPSL - select PXA27x - select PXA_SHARP_Cxx00 - select MACH_SPITZ select I2C select I2C_PXA + select MACH_SPITZ + select PXA27x + select PXA_SHARP_Cxx00 config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" @@ -575,8 +575,8 @@ config MACH_ICONTROL config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" - select PXA25x select FB_W100 + select PXA25x config MACH_E330 bool "Toshiba e330" @@ -628,8 +628,8 @@ config MACH_E800 config MACH_ZIPIT2 bool "Zipit Z2 Handheld" - select PXA27x select HAVE_PWM + select PXA27x endif endmenu @@ -720,9 +720,9 @@ config SHARPSL_PM config SHARPSL_PM_MAX1111 bool select HWMON + select SENSORS_MAX1111 select SPI select SPI_MASTER - select SENSORS_MAX1111 config PXA_HAVE_ISA_IRQS bool diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index c593be428b8f..14c1d47e1abf 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -21,8 +21,8 @@ config REALVIEW_EB_A9MP config REALVIEW_EB_ARM11MP bool "Support ARM11MPCore Tile" depends on MACH_REALVIEW_EB - select CPU_V6K select ARCH_HAS_BARRIERS if SMP + select CPU_V6K select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help @@ -40,12 +40,12 @@ config REALVIEW_EB_ARM11MP_REVB config MACH_REALVIEW_PB11MP bool "Support RealView(R) Platform Baseboard for ARM11MPCore" - select CPU_V6K + select ARCH_HAS_BARRIERS if SMP select ARM_GIC + select CPU_V6K select HAVE_PATA_PLATFORM select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 - select ARCH_HAS_BARRIERS if SMP help Include support for the ARM(R) RealView(R) Platform Baseboard for the ARM11MPCore. This platform has an on-board ARM11MPCore and has @@ -54,8 +54,8 @@ config MACH_REALVIEW_PB11MP # ARMv6 CPU without K extensions, but does have the new exclusive ops config MACH_REALVIEW_PB1176 bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" - select CPU_V6 select ARM_GIC + select CPU_V6 select HAVE_TCM select MIGHT_HAVE_CACHE_L2X0 help @@ -73,8 +73,8 @@ config REALVIEW_PB1176_SECURE_FLASH config MACH_REALVIEW_PBA8 bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform" - select CPU_V7 select ARM_GIC + select CPU_V7 select HAVE_PATA_PLATFORM help Include support for the ARM(R) RealView Platform Baseboard for @@ -83,11 +83,11 @@ config MACH_REALVIEW_PBA8 config MACH_REALVIEW_PBX bool "Support RealView(R) Platform Baseboard Explore" + select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ARM_GIC select HAVE_PATA_PLATFORM select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 - select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ZONE_DMA if SPARSEMEM help Include support for the ARM(R) RealView(R) Platform Baseboard diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index c5256f4e90bb..495f6928cbaa 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -7,7 +7,7 @@ config S3C2412_CPUFREQ bool depends on CPU_FREQ_S3C24XX && CPU_S3C2412 - select S3C2412_IOTIMING default y + select S3C2412_IOTIMING help CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index ece7a10fe3c6..a4d7fd27bec5 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -5,8 +5,8 @@ config S3C2440_CPUFREQ bool "S3C2440/S3C2442 CPU Frequency scaling support" depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) - select S3C2410_CPUFREQ_UTILS default y + select S3C2410_CPUFREQ_UTILS help CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index d56b0f7f2b20..2b6cb5f29c2d 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -17,10 +17,10 @@ config CPU_S3C2410 bool "SAMSUNG S3C2410" default y select CPU_ARM920T - select S3C2410_CLOCK select CPU_LLSERIAL_S3C2410 - select S3C2410_PM if PM + select S3C2410_CLOCK select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX + select S3C2410_PM if PM help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -30,8 +30,8 @@ config CPU_S3C2412 depends on ARCH_S3C24XX select CPU_ARM926T select CPU_LLSERIAL_S3C2440 - select S3C2412_PM if PM select S3C2412_DMA if S3C24XX_DMA + select S3C2412_PM if PM help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line @@ -40,10 +40,10 @@ config CPU_S3C2416 depends on ARCH_S3C24XX select CPU_ARM926T select CPU_LLSERIAL_S3C2440 - select SAMSUNG_CLKSRC + select S3C2416_PM if PM select S3C2443_COMMON select S3C2443_DMA if S3C24XX_DMA - select S3C2416_PM if PM + select SAMSUNG_CLKSRC help Support for the S3C2416 SoC from the S3C24XX line @@ -75,9 +75,9 @@ config CPU_S3C2443 depends on ARCH_S3C24XX select CPU_ARM920T select CPU_LLSERIAL_S3C2440 - select SAMSUNG_CLKSRC select S3C2443_COMMON select S3C2443_DMA if S3C24XX_DMA + select SAMSUNG_CLKSRC help Support for the S3C2443 SoC from the S3C24XX line @@ -156,16 +156,16 @@ config MACH_AML_M5900 config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" + select ISA + select MACH_BAST_IDE select S3C2410_IOTIMING if S3C2410_CPUFREQ - select S3C24XX_SIMTEC_PM if PM + select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR + select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB - select MACH_BAST_IDE - select S3C24XX_DCLK - select ISA select S3C_DEV_HWMON - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec Electronics EB2410ITX development board (also known as BAST) @@ -181,9 +181,9 @@ config BAST_PC104_IRQ config ARCH_H1940 bool "IPAQ H1940" select PM_H1940 if PM - select S3C_DEV_USB_HOST - select S3C_DEV_NAND select S3C24XX_SETUP_TS + select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the HP IPAQ H1940 @@ -203,23 +203,23 @@ config PM_H1940 config MACH_N30 bool "Acer N30 family" select MACH_N35 - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you want suppt for the Acer N30, Acer N35, Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. config MACH_OTOM bool "NexVision OTOM Board" - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the Nex Vision OTOM board config MACH_QT2410 bool "QT2410" - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the Armzone QT2410 @@ -239,12 +239,12 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" - select S3C24XX_SIMTEC_PM if PM + select MACH_BAST_IDE select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR - select MACH_BAST_IDE - select S3C_DEV_USB_HOST + select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB + select S3C_DEV_USB_HOST help Say Y here if you are using the Thorcom VR1000 board. @@ -285,8 +285,8 @@ comment "S3C2412 Boards" config MACH_JIVE bool "Logitech Jive" - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the Logitech Jive. @@ -314,15 +314,15 @@ config MACH_SMDK2413 bool "SMDK2413" select MACH_S3C2413 select S3C24XX_SMDK - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using an SMDK2413 config MACH_VSTMS bool "VMSTMS" - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using an VSTMS board @@ -351,13 +351,13 @@ comment "S3C2416 Boards" config MACH_SMDK2416 bool "SMDK2416" + select S3C2416_SETUP_SDHCI select S3C24XX_SMDK select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_NAND select S3C_DEV_USB_HOST - select S3C2416_SETUP_SDHCI help Say Y here if you are using an SMDK2416 @@ -379,11 +379,11 @@ comment "S3C2440 Boards" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" - select S3C24XX_DCLK - select S3C24XX_SIMTEC_PM if PM select HAVE_PATA_PLATFORM - select S3C24XX_GPIO_EXTRA64 select S3C2440_XTAL_12000000 + select S3C24XX_DCLK + select S3C24XX_GPIO_EXTRA64 + select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec Electronics ANUBIS @@ -391,18 +391,18 @@ config MACH_ANUBIS config MACH_AT2440EVB bool "Avantech AT2440EVB development board" - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the AT2440EVB development board config MACH_MINI2440 bool "MINI2440 development board" select EEPROM_AT24 - select NEW_LEDS select LEDS_CLASS select LEDS_TRIGGER select LEDS_TRIGGER_BACKLIGHT + select NEW_LEDS select S3C_DEV_NAND select S3C_DEV_USB_HOST help @@ -412,20 +412,20 @@ config MACH_MINI2440 config MACH_NEXCODER_2440 bool "NexVision NEXCODER 2440 Light Board" select S3C2440_XTAL_12000000 - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" + select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2440_XTAL_12000000 select S3C24XX_DCLK - select S3C24XX_SIMTEC_PM if PM select S3C24XX_GPIO_EXTRA128 - select S3C2440_XTAL_12000000 - select S3C2410_IOTIMING if S3C2440_CPUFREQ - select S3C_DEV_USB_HOST + select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec IM2440D20 module, also known as the Osiris. @@ -445,8 +445,8 @@ config MACH_OSIRIS_DVS config MACH_RX3715 bool "HP iPAQ rx3715" - select S3C2440_XTAL_16934400 select PM_H1940 if PM + select S3C2440_XTAL_16934400 select S3C_DEV_NAND help Say Y here if you are using the HP iPAQ rx3715. @@ -455,8 +455,8 @@ config ARCH_S3C2440 bool "SMDK2440" select S3C2440_XTAL_16934400 select S3C24XX_SMDK - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the SMDK2440. @@ -478,11 +478,11 @@ comment "S3C2442 Boards" config MACH_NEO1973_GTA02 bool "Openmoko GTA02 / Freerunner phone" + select I2C + select MACH_NEO1973 select MFD_PCF50633 select PCF50633_GPIO - select I2C select POWER_SUPPLY - select MACH_NEO1973 select S3C24XX_PWM select S3C_DEV_USB_HOST help @@ -490,13 +490,13 @@ config MACH_NEO1973_GTA02 config MACH_RX1950 bool "HP iPAQ rx1950" - select S3C24XX_DCLK - select PM_H1940 if PM select I2C - select S3C24XX_PWM - select S3C_DEV_NAND + select PM_H1940 if PM select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C2440_XTAL_16934400 + select S3C24XX_DCLK + select S3C24XX_PWM + select S3C_DEV_NAND help Say Y here if you're using HP iPAQ rx1950 diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 06ca1cd4cae2..63e7ae3ee9e6 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -7,9 +7,9 @@ config PLAT_S3C64XX bool depends on ARCH_S3C64XX - select SAMSUNG_WAKEMASK - select PM_GENERIC_DOMAINS default y + select PM_GENERIC_DOMAINS + select SAMSUNG_WAKEMASK help Base platform code for any Samsung S3C64XX device @@ -31,8 +31,8 @@ config S3C64XX_DMA select S3C_DMA config S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_SDHCI_GPIO bool + select S3C64XX_SETUP_SDHCI_GPIO help Internal configuration for default SDHCI setup for S3C6400 and S3C6410 SoCs. @@ -93,9 +93,9 @@ config S3C64XX_SETUP_USB_PHY config MACH_SMDK6400 bool "SMDK6400" select CPU_S3C6400 + select S3C64XX_SETUP_SDHCI select S3C_DEV_HSMMC select S3C_DEV_NAND - select S3C64XX_SETUP_SDHCI help Machine support for the Samsung SMDK6400 @@ -104,21 +104,21 @@ config MACH_SMDK6400 config MACH_ANW6410 bool "A&W6410" select CPU_S3C6410 - select S3C_DEV_FB select S3C64XX_SETUP_FB_24BPP + select S3C_DEV_FB help Machine support for the A&W6410 config MACH_MINI6410 bool "MINI6410" select CPU_S3C6410 + select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_SDHCI + select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 - select S3C64XX_SETUP_SDHCI - select S3C_DEV_USB_HOST select S3C_DEV_NAND - select S3C_DEV_FB - select S3C64XX_SETUP_FB_24BPP + select S3C_DEV_USB_HOST select SAMSUNG_DEV_ADC select SAMSUNG_DEV_TS help @@ -127,42 +127,42 @@ config MACH_MINI6410 config MACH_REAL6410 bool "REAL6410" select CPU_S3C6410 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 + select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_SDHCI select S3C_DEV_FB - select S3C64XX_SETUP_FB_24BPP + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 select S3C_DEV_NAND + select S3C_DEV_USB_HOST select SAMSUNG_DEV_ADC select SAMSUNG_DEV_TS - select S3C_DEV_USB_HOST help Machine support for the CoreWind REAL6410 config MACH_SMDK6410 bool "SMDK6410" select CPU_S3C6410 - select SAMSUNG_DEV_ADC + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_I2C1 + select S3C64XX_SETUP_IDE + select S3C64XX_SETUP_KEYPAD + select S3C64XX_SETUP_SDHCI + select S3C64XX_SETUP_USB_PHY + select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_I2C1 - select SAMSUNG_DEV_IDE - select S3C_DEV_FB select S3C_DEV_RTC - select SAMSUNG_DEV_TS select S3C_DEV_USB_HOST select S3C_DEV_USB_HSOTG select S3C_DEV_WDT + select SAMSUNG_DEV_ADC select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_IDE select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_I2C1 - select S3C64XX_SETUP_IDE - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_KEYPAD - select S3C64XX_SETUP_USB_PHY + select SAMSUNG_DEV_TS help Machine support for the Samsung SMDK6410 @@ -198,13 +198,13 @@ endchoice config SMDK6410_WM1190_EV1 bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" depends on MACH_SMDK6410 - select REGULATOR - select REGULATOR_WM8350 - select SAMSUNG_GPIO_EXTRA64 - select MFD_WM8350_I2C select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8350_CONFIG_MODE_3 + select MFD_WM8350_I2C select MFD_WM8352_CONFIG_MODE_0 + select REGULATOR + select REGULATOR_WM8350 + select SAMSUNG_GPIO_EXTRA64 help The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC and audio daughtercard for the Samsung SMDK6410 reference @@ -216,11 +216,11 @@ config SMDK6410_WM1190_EV1 config SMDK6410_WM1192_EV1 bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" depends on MACH_SMDK6410 + select MFD_WM831X + select MFD_WM831X_I2C select REGULATOR select REGULATOR_WM831X select SAMSUNG_GPIO_EXTRA64 - select MFD_WM831X - select MFD_WM831X_I2C help The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC daughtercard for the Samsung SMDK6410 reference platform. @@ -232,19 +232,19 @@ config SMDK6410_WM1192_EV1 config MACH_NCP bool "NCP" select CPU_S3C6410 - select S3C_DEV_I2C1 - select S3C_DEV_HSMMC1 select S3C64XX_SETUP_I2C1 + select S3C_DEV_HSMMC1 + select S3C_DEV_I2C1 help Machine support for the Samsung NCP config MACH_HMT bool "Airgoo HMT" select CPU_S3C6410 + select S3C64XX_SETUP_FB_24BPP select S3C_DEV_FB select S3C_DEV_NAND select S3C_DEV_USB_HOST - select S3C64XX_SETUP_FB_24BPP select SAMSUNG_DEV_PWM help Machine support for the Airgoo HMT @@ -252,17 +252,17 @@ config MACH_HMT config MACH_SMARTQ bool select CPU_S3C6410 + select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_SDHCI + select S3C64XX_SETUP_USB_PHY + select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 - select S3C_DEV_FB select S3C_DEV_HWMON select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG select S3C_DEV_USB_HOST - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_USB_PHY + select S3C_DEV_USB_HSOTG select SAMSUNG_DEV_ADC select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS @@ -284,26 +284,26 @@ config MACH_SMARTQ7 config MACH_WLF_CRAGG_6410 bool "Wolfson Cragganmore 6410" select CPU_S3C6410 - select S3C64XX_SETUP_SDHCI + select I2C + select LEDS_GPIO_REGISTER + select S3C64XX_DEV_SPI0 + select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_I2C1 select S3C64XX_SETUP_IDE - select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_KEYPAD + select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_SPI select S3C64XX_SETUP_USB_PHY - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_KEYPAD - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_I2C1 - select S3C_DEV_WDT select S3C_DEV_RTC - select S3C64XX_DEV_SPI0 + select S3C_DEV_USB_HOST + select S3C_DEV_USB_HSOTG + select S3C_DEV_WDT + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_KEYPAD select SAMSUNG_GPIO_EXTRA128 - select I2C - select LEDS_GPIO_REGISTER help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index c87f6108eeb1..e8742cb7ddd9 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -9,18 +9,18 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool - select SAMSUNG_DMADEV select S5P_HRT select S5P_SLEEP if PM + select SAMSUNG_DMADEV select SAMSUNG_WAKEMASK if PM help Enable S5P6440 CPU support config CPU_S5P6450 bool - select SAMSUNG_DMADEV select S5P_HRT select S5P_SLEEP if PM + select SAMSUNG_DMADEV select SAMSUNG_WAKEMASK if PM help Enable S5P6450 CPU support @@ -52,19 +52,19 @@ config MACH_SMDK6440 bool "SMDK6440" select CPU_S5P6440 select S3C_DEV_FB - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_WDT select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S5P64X0_SETUP_FB_24BPP + select S5P64X0_SETUP_I2C1 + select S5P64X0_SETUP_SDHCI_GPIO select SAMSUNG_DEV_ADC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS - select S5P64X0_SETUP_FB_24BPP - select S5P64X0_SETUP_I2C1 - select S5P64X0_SETUP_SDHCI_GPIO help Machine support for the Samsung SMDK6440 @@ -72,19 +72,19 @@ config MACH_SMDK6450 bool "SMDK6450" select CPU_S5P6450 select S3C_DEV_FB - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_WDT select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S5P64X0_SETUP_FB_24BPP + select S5P64X0_SETUP_I2C1 + select S5P64X0_SETUP_SDHCI_GPIO select SAMSUNG_DEV_ADC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS - select S5P64X0_SETUP_FB_24BPP - select S5P64X0_SETUP_I2C1 - select S5P64X0_SETUP_SDHCI_GPIO help Machine support for the Samsung SMDK6450 diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 75a26eaf2633..15170be97a74 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -60,12 +60,6 @@ config MACH_SMDKC100 select S3C_DEV_I2C1 select S3C_DEV_RTC select S3C_DEV_WDT - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_IDE - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS select S5PC100_SETUP_FB_24BPP select S5PC100_SETUP_I2C1 select S5PC100_SETUP_IDE @@ -74,6 +68,12 @@ config MACH_SMDKC100 select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_IDE + select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM + select SAMSUNG_DEV_TS help Machine support for the Samsung SMDKC100 diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 77185c38188b..92ad72f0ef98 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,11 +11,11 @@ if ARCH_S5PV210 config CPU_S5PV210 bool - select SAMSUNG_DMADEV select S5P_EXT_INT select S5P_HRT select S5P_PM if PM select S5P_SLEEP if PM + select SAMSUNG_DMADEV help Enable S5PV210 CPU support @@ -76,44 +76,44 @@ config MACH_AQUILA bool "Aquila" select CPU_S5PV210 select S3C_DEV_FB - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 - select S5P_DEV_ONENAND select S5PV210_SETUP_FB_24BPP select S5PV210_SETUP_SDHCI select S5PV210_SETUP_USB_PHY + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_ONENAND help Machine support for the Samsung Aquila target based on S5PC110 SoC config MACH_GONI bool "GONI" select CPU_S5PV210 - select S5P_GPIO_INT select S3C_DEV_FB - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_I2C1 select S3C_DEV_I2C2 - select S5P_DEV_MFC select S3C_DEV_USB_HSOTG - select S5P_DEV_ONENAND - select SAMSUNG_DEV_KEYPAD - select S5P_DEV_TV select S5PV210_SETUP_FB_24BPP + select S5PV210_SETUP_FIMC select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI - select S5PV210_SETUP_FIMC select S5PV210_SETUP_USB_PHY + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_MFC + select S5P_DEV_ONENAND + select S5P_DEV_TV + select S5P_GPIO_INT + select SAMSUNG_DEV_KEYPAD help Machine support for Samsung GONI board S5PC110(MCP) is one of package option of S5PV210 @@ -125,14 +125,14 @@ config MACH_SMDKC110 select S3C_DEV_I2C2 select S3C_DEV_RTC select S3C_DEV_WDT + select S5PV210_SETUP_I2C1 + select S5PV210_SETUP_I2C2 + select S5PV210_SETUP_IDE select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_MFC select SAMSUNG_DEV_IDE - select S5PV210_SETUP_I2C1 - select S5PV210_SETUP_I2C2 - select S5PV210_SETUP_IDE help Machine support for Samsung SMDKC110 S5PC110(MCP) is one of package option of S5PV210 @@ -154,6 +154,13 @@ config MACH_SMDKV210 select S3C_DEV_RTC select S3C_DEV_USB_HSOTG select S3C_DEV_WDT + select S5PV210_SETUP_FB_24BPP + select S5PV210_SETUP_I2C1 + select S5PV210_SETUP_I2C2 + select S5PV210_SETUP_IDE + select S5PV210_SETUP_KEYPAD + select S5PV210_SETUP_SDHCI + select S5PV210_SETUP_USB_PHY select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 @@ -165,20 +172,13 @@ config MACH_SMDKV210 select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS - select S5PV210_SETUP_FB_24BPP - select S5PV210_SETUP_I2C1 - select S5PV210_SETUP_I2C2 - select S5PV210_SETUP_IDE - select S5PV210_SETUP_KEYPAD - select S5PV210_SETUP_SDHCI - select S5PV210_SETUP_USB_PHY help Machine support for Samsung SMDKV210 config MACH_TORBRECK bool "Torbreck" - select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE + select CPU_S5PV210 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 42625e4d949a..ca14dbdcfb22 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -49,15 +49,15 @@ config SA1100_COLLIE bool "Sharp Zaurus SL5500" # FIXME: select CPU_FREQ_SA11x0 select SHARP_LOCOMO - select SHARP_SCOOP select SHARP_PARAM + select SHARP_SCOOP help Say Y here to support the Sharp Zaurus SL5500 PDAs. config SA1100_H3100 bool "Compaq iPAQ H3100" - select HTC_EGPIO select CPU_FREQ_SA1110 + select HTC_EGPIO help Say Y here if you intend to run this kernel on the Compaq iPAQ H3100 handheld computer. Information about this machine and the @@ -67,8 +67,8 @@ config SA1100_H3100 config SA1100_H3600 bool "Compaq iPAQ H3600/H3700" - select HTC_EGPIO select CPU_FREQ_SA1110 + select HTC_EGPIO help Say Y here if you intend to run this kernel on the Compaq iPAQ H3600 handheld computer. Information about this machine and the @@ -78,16 +78,16 @@ config SA1100_H3600 config SA1100_BADGE4 bool "HP Labs BadgePAD 4" - select SA1111 select CPU_FREQ_SA1100 + select SA1111 help Say Y here if you want to build a kernel for the HP Laboratories BadgePAD 4. config SA1100_JORNADA720 bool "HP Jornada 720" - select SA1111 # FIXME: select CPU_FREQ_SA11x0 + select SA1111 help Say Y here if you want to build a kernel for the HP Jornada 720 handheld computer. See @@ -95,8 +95,8 @@ config SA1100_JORNADA720 config SA1100_JORNADA720_SSP bool "HP Jornada 720 Extended SSP driver" - select SA1100_SSP depends on SA1100_JORNADA720 + select SA1100_SSP help Say Y here if you have a HP Jornada 7xx handheld computer and you want to access devices connected to the MCU. Those include the diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 4cacc2d22fbe..8ae100cc655c 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -4,49 +4,49 @@ comment "SH-Mobile System Type" config ARCH_SH7367 bool "SH-Mobile G3 (SH7367)" + select ARCH_WANT_OPTIONAL_GPIOLIB select CPU_V6 select SH_CLK_CPG - select ARCH_WANT_OPTIONAL_GPIOLIB config ARCH_SH7377 bool "SH-Mobile G4 (SH7377)" + select ARCH_WANT_OPTIONAL_GPIOLIB select CPU_V7 select SH_CLK_CPG - select ARCH_WANT_OPTIONAL_GPIOLIB config ARCH_SH7372 bool "SH-Mobile AP4 (SH7372)" - select CPU_V7 - select SH_CLK_CPG select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_CPU_SUSPEND if PM || CPU_IDLE + select CPU_V7 + select SH_CLK_CPG config ARCH_SH73A0 bool "SH-Mobile AG5 (R8A73A00)" - select CPU_V7 - select SH_CLK_CPG select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC + select CPU_V7 select I2C + select SH_CLK_CPG config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" + select ARCH_WANT_OPTIONAL_GPIOLIB select CPU_V7 select SH_CLK_CPG - select ARCH_WANT_OPTIONAL_GPIOLIB config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC select CPU_V7 select SH_CLK_CPG - select ARM_GIC - select ARCH_WANT_OPTIONAL_GPIOLIB config ARCH_EMEV2 bool "Emma Mobile EV2" - select CPU_V7 - select ARM_GIC select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC + select CPU_V7 comment "SH-Mobile Board Type" @@ -65,9 +65,9 @@ config MACH_AP4EVB bool "AP4EVB board" depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR select SH_LCD_MIPI_DSI select SND_SOC_AK4642 if SND_SIMPLE_CARD - select REGULATOR_FIXED_VOLTAGE if REGULATOR choice prompt "AP4EVB LCD panel selection" @@ -84,37 +84,37 @@ endchoice config MACH_AG5EVM bool "AG5EVM board" + depends on ARCH_SH73A0 select ARCH_REQUIRE_GPIOLIB - select SH_LCD_MIPI_DSI select REGULATOR_FIXED_VOLTAGE if REGULATOR - depends on ARCH_SH73A0 + select SH_LCD_MIPI_DSI config MACH_MACKEREL bool "mackerel board" depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB - select SND_SOC_AK4642 if SND_SIMPLE_CARD select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_AK4642 if SND_SIMPLE_CARD config MACH_KOTA2 bool "KOTA2 board" + depends on ARCH_SH73A0 select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR - depends on ARCH_SH73A0 config MACH_BONITO bool "bonito board" + depends on ARCH_R8A7740 select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR - depends on ARCH_R8A7740 config MACH_ARMADILLO800EVA bool "Armadillo-800 EVA board" depends on ARCH_R8A7740 select ARCH_REQUIRE_GPIOLIB - select USE_OF select REGULATOR_FIXED_VOLTAGE if REGULATOR select SND_SOC_WM8978 if SND_SIMPLE_CARD + select USE_OF config MACH_MARZEN bool "MARZEN board" @@ -125,16 +125,16 @@ config MACH_MARZEN config MACH_KZM9D bool "KZM9D board" depends on ARCH_EMEV2 - select USE_OF select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 select ARCH_REQUIRE_GPIOLIB - select USE_OF - select SND_SOC_AK4642 if SND_SIMPLE_CARD select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF comment "SH-Mobile System Configuration" diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 11680c532b38..9ff6f6ea3617 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -4,42 +4,42 @@ comment "NVIDIA Tegra options" config ARCH_TEGRA_2x_SOC bool "Enable support for Tegra20 family" - select CPU_V7 - select ARM_GIC select ARCH_REQUIRE_GPIOLIB - select PINCTRL - select PINCTRL_TEGRA20 - select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB - select USB_ULPI_VIEWPORT if USB_SUPPORT select ARM_ERRATA_720789 select ARM_ERRATA_742230 select ARM_ERRATA_751472 select ARM_ERRATA_754327 select ARM_ERRATA_764369 if SMP + select ARM_GIC + select CPU_FREQ_TABLE if CPU_FREQ + select CPU_V7 + select PINCTRL + select PINCTRL_TEGRA20 select PL310_ERRATA_727915 if CACHE_L2X0 select PL310_ERRATA_769419 if CACHE_L2X0 - select CPU_FREQ_TABLE if CPU_FREQ + select USB_ARCH_HAS_EHCI if USB_SUPPORT + select USB_ULPI if USB + select USB_ULPI_VIEWPORT if USB_SUPPORT help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller config ARCH_TEGRA_3x_SOC bool "Enable support for Tegra30 family" - select CPU_V7 - select ARM_GIC select ARCH_REQUIRE_GPIOLIB - select PINCTRL - select PINCTRL_TEGRA30 - select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB - select USB_ULPI_VIEWPORT if USB_SUPPORT select ARM_ERRATA_743622 select ARM_ERRATA_751472 select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP - select PL310_ERRATA_769419 if CACHE_L2X0 + select ARM_GIC select CPU_FREQ_TABLE if CPU_FREQ + select CPU_V7 + select PINCTRL + select PINCTRL_TEGRA30 + select PL310_ERRATA_769419 if CACHE_L2X0 + select USB_ARCH_HAS_EHCI if USB_SUPPORT + select USB_ULPI if USB + select USB_ULPI_VIEWPORT if USB_SUPPORT help Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index f7e12ede008c..1f597647d431 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -7,8 +7,8 @@ comment "ST-Ericsson Mobile Platform Products" config MACH_U300 bool "U300" select PINCTRL - select PINCTRL_U300 select PINCTRL_COH901 + select PINCTRL_U300 comment "ST-Ericsson U300/U335 Feature Selections" diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 5848206ee9b9..e8c3f0d70ca6 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -3,33 +3,33 @@ if ARCH_U8500 config UX500_SOC_COMMON bool default y - select ARM_GIC - select HAS_MTU - select PL310_ERRATA_753970 if CACHE_PL310 select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP + select ARM_GIC select CACHE_L2X0 + select COMMON_CLK + select HAS_MTU select PINCTRL select PINCTRL_NOMADIK - select COMMON_CLK + select PL310_ERRATA_753970 if CACHE_PL310 config UX500_SOC_DB8500 bool + select CPU_FREQ_TABLE if CPU_FREQ select MFD_DB8500_PRCMU + select PINCTRL_DB8500 select REGULATOR select REGULATOR_DB8500_PRCMU - select CPU_FREQ_TABLE if CPU_FREQ - select PINCTRL_DB8500 menu "Ux500 target platform (boards)" config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" - select UX500_SOC_DB8500 select I2C select I2C_NOMADIK - select SOC_BUS select REGULATOR_FIXED_VOLTAGE + select SOC_BUS + select UX500_SOC_DB8500 help Include support for the MOP500 development platform. diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index c1f38f6625b2..63d8e9f81b99 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -3,9 +3,9 @@ menu "Versatile platform type" config ARCH_VERSATILE_PB bool "Support Versatile Platform Baseboard for ARM926EJ-S" + default y select CPU_ARM926T select MIGHT_HAVE_PCI - default y help Include support for the ARM(R) Versatile Platform Baseboard for the ARM926EJ-S. @@ -19,8 +19,8 @@ config MACH_VERSATILE_AB config MACH_VERSATILE_DT bool "Support Versatile platform from device tree" - select USE_OF select CPU_ARM926T + select USE_OF help Include support for the ARM(R) Versatile/PB platform, using the device tree for discovery diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c9a4963b5c3d..94186b6c685f 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -10,8 +10,8 @@ config CPU_ARM7TDMI depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T - select CPU_PABRT_LEGACY select CPU_CACHE_V4 + select CPU_PABRT_LEGACY help A 32-bit RISC microprocessor based on the ARM7 processor core which has no memory control unit and cache. @@ -24,11 +24,11 @@ config CPU_ARM720T bool "Support ARM720T processor" if ARCH_INTEGRATOR select CPU_32v4T select CPU_ABRT_LV4T - select CPU_PABRT_LEGACY select CPU_CACHE_V4 select CPU_CACHE_VIVT - select CPU_CP15_MMU select CPU_COPY_V4WT if MMU + select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WT if MMU help A 32-bit RISC processor with 8kByte Cache, Write Buffer and @@ -43,9 +43,9 @@ config CPU_ARM740T depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T - select CPU_PABRT_LEGACY select CPU_CACHE_V3 # although the core is v4t select CPU_CP15_MPU + select CPU_PABRT_LEGACY help A 32-bit RISC processor with 8KB cache or 4KB variants, write buffer and MPU(Protection Unit) built around @@ -60,8 +60,8 @@ config CPU_ARM9TDMI depends on !MMU select CPU_32v4T select CPU_ABRT_NOMMU - select CPU_PABRT_LEGACY select CPU_CACHE_V4 + select CPU_PABRT_LEGACY help A 32-bit RISC microprocessor based on the ARM9 processor core which has no memory control unit and cache. @@ -74,11 +74,11 @@ config CPU_ARM920T bool "Support ARM920T processor" if ARCH_INTEGRATOR select CPU_32v4T select CPU_ABRT_EV4T - select CPU_PABRT_LEGACY select CPU_CACHE_V4WT select CPU_CACHE_VIVT - select CPU_CP15_MMU select CPU_COPY_V4WB if MMU + select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WBI if MMU help The ARM920T is licensed to be produced by numerous vendors, @@ -92,11 +92,11 @@ config CPU_ARM922T bool "Support ARM922T processor" if ARCH_INTEGRATOR select CPU_32v4T select CPU_ABRT_EV4T - select CPU_PABRT_LEGACY select CPU_CACHE_V4WT select CPU_CACHE_VIVT - select CPU_CP15_MMU select CPU_COPY_V4WB if MMU + select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WBI if MMU help The ARM922T is a version of the ARM920T, but with smaller @@ -111,11 +111,11 @@ config CPU_ARM925T bool "Support ARM925T processor" if ARCH_OMAP1 select CPU_32v4T select CPU_ABRT_EV4T - select CPU_PABRT_LEGACY select CPU_CACHE_V4WT select CPU_CACHE_VIVT - select CPU_CP15_MMU select CPU_COPY_V4WB if MMU + select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WBI if MMU help The ARM925T is a mix between the ARM920T and ARM926T, but with @@ -130,10 +130,10 @@ config CPU_ARM926T bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB select CPU_32v5 select CPU_ABRT_EV5TJ - select CPU_PABRT_LEGACY select CPU_CACHE_VIVT - select CPU_CP15_MMU select CPU_COPY_V4WB if MMU + select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WBI if MMU help This is a variant of the ARM920. It has slightly different @@ -148,11 +148,11 @@ config CPU_FA526 bool select CPU_32v4 select CPU_ABRT_EV4 - select CPU_PABRT_LEGACY - select CPU_CACHE_VIVT - select CPU_CP15_MMU select CPU_CACHE_FA + select CPU_CACHE_VIVT select CPU_COPY_FA if MMU + select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_FA if MMU help The FA526 is a version of the ARMv4 compatible processor with @@ -167,9 +167,9 @@ config CPU_ARM940T depends on !MMU select CPU_32v4T select CPU_ABRT_NOMMU - select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MPU + select CPU_PABRT_LEGACY help ARM940T is a member of the ARM9TDMI family of general- purpose microprocessors with MPU and separate 4KB @@ -185,9 +185,9 @@ config CPU_ARM946E depends on !MMU select CPU_32v5 select CPU_ABRT_NOMMU - select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MPU + select CPU_PABRT_LEGACY help ARM946E-S is a member of the ARM9E-S family of high- performance, 32-bit system-on-chip processor solutions. @@ -201,11 +201,11 @@ config CPU_ARM1020 bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV4T - select CPU_PABRT_LEGACY select CPU_CACHE_V4WT select CPU_CACHE_VIVT - select CPU_CP15_MMU select CPU_COPY_V4WB if MMU + select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WBI if MMU help The ARM1020 is the 32K cached version of the ARM10 processor, @@ -217,25 +217,25 @@ config CPU_ARM1020 # ARM1020E - needs validating config CPU_ARM1020E bool "Support ARM1020E processor" if ARCH_INTEGRATOR + depends on n select CPU_32v5 select CPU_ABRT_EV4T - select CPU_PABRT_LEGACY select CPU_CACHE_V4WT select CPU_CACHE_VIVT - select CPU_CP15_MMU select CPU_COPY_V4WB if MMU + select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WBI if MMU - depends on n # ARM1022E config CPU_ARM1022 bool "Support ARM1022E processor" if ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV4T - select CPU_PABRT_LEGACY select CPU_CACHE_VIVT - select CPU_CP15_MMU select CPU_COPY_V4WB if MMU # can probably do better + select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WBI if MMU help The ARM1022E is an implementation of the ARMv5TE architecture @@ -250,10 +250,10 @@ config CPU_ARM1026 bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10 - select CPU_PABRT_LEGACY select CPU_CACHE_VIVT - select CPU_CP15_MMU select CPU_COPY_V4WB if MMU # can probably do better + select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WBI if MMU help The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture @@ -268,11 +268,11 @@ config CPU_SA110 select CPU_32v3 if ARCH_RPC select CPU_32v4 if !ARCH_RPC select CPU_ABRT_EV4 - select CPU_PABRT_LEGACY select CPU_CACHE_V4WB select CPU_CACHE_VIVT - select CPU_CP15_MMU select CPU_COPY_V4WB if MMU + select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WB if MMU help The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and @@ -288,10 +288,10 @@ config CPU_SA1100 bool select CPU_32v4 select CPU_ABRT_EV4 - select CPU_PABRT_LEGACY select CPU_CACHE_V4WB select CPU_CACHE_VIVT select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WB if MMU # XScale @@ -299,9 +299,9 @@ config CPU_XSCALE bool select CPU_32v5 select CPU_ABRT_EV5T - select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WBI if MMU # XScale Core Version 3 @@ -309,9 +309,9 @@ config CPU_XSC3 bool select CPU_32v5 select CPU_ABRT_EV5T - select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WBI if MMU select IO_36 @@ -320,21 +320,21 @@ config CPU_MOHAWK bool select CPU_32v5 select CPU_ABRT_EV5T - select CPU_PABRT_LEGACY select CPU_CACHE_VIVT + select CPU_COPY_V4WB if MMU select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_V4WBI if MMU - select CPU_COPY_V4WB if MMU # Feroceon config CPU_FEROCEON bool select CPU_32v5 select CPU_ABRT_EV5T - select CPU_PABRT_LEGACY select CPU_CACHE_VIVT - select CPU_CP15_MMU select CPU_COPY_FEROCEON if MMU + select CPU_CP15_MMU + select CPU_PABRT_LEGACY select CPU_TLB_FEROCEON if MMU config CPU_FEROCEON_OLD_ID @@ -349,20 +349,20 @@ config CPU_FEROCEON_OLD_ID # Marvell PJ4 config CPU_PJ4 bool - select CPU_V7 select ARM_THUMBEE + select CPU_V7 # ARMv6 config CPU_V6 bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX select CPU_32v6 select CPU_ABRT_EV6 - select CPU_PABRT_V6 select CPU_CACHE_V6 select CPU_CACHE_VIPT + select CPU_COPY_V6 if MMU select CPU_CP15_MMU select CPU_HAS_ASID if MMU - select CPU_COPY_V6 if MMU + select CPU_PABRT_V6 select CPU_TLB_V6 if MMU # ARMv6k @@ -371,12 +371,12 @@ config CPU_V6K select CPU_32v6 select CPU_32v6K select CPU_ABRT_EV6 - select CPU_PABRT_V6 select CPU_CACHE_V6 select CPU_CACHE_VIPT + select CPU_COPY_V6 if MMU select CPU_CP15_MMU select CPU_HAS_ASID if MMU - select CPU_COPY_V6 if MMU + select CPU_PABRT_V6 select CPU_TLB_V6 if MMU # ARMv7 @@ -385,44 +385,44 @@ config CPU_V7 select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 - select CPU_PABRT_V7 select CPU_CACHE_V7 select CPU_CACHE_VIPT + select CPU_COPY_V6 if MMU select CPU_CP15_MMU select CPU_HAS_ASID if MMU - select CPU_COPY_V6 if MMU + select CPU_PABRT_V7 select CPU_TLB_V7 if MMU # Figure out what processor architecture version we should be using. # This defines the compiler instruction set which depends on the machine type. config CPU_32v3 bool - select TLS_REG_EMUL if SMP || !MMU - select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select CPU_USE_DOMAINS if MMU + select NEEDS_SYSCALL_FOR_CMPXCHG if SMP + select TLS_REG_EMUL if SMP || !MMU config CPU_32v4 bool - select TLS_REG_EMUL if SMP || !MMU - select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select CPU_USE_DOMAINS if MMU + select NEEDS_SYSCALL_FOR_CMPXCHG if SMP + select TLS_REG_EMUL if SMP || !MMU config CPU_32v4T bool - select TLS_REG_EMUL if SMP || !MMU - select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select CPU_USE_DOMAINS if MMU + select NEEDS_SYSCALL_FOR_CMPXCHG if SMP + select TLS_REG_EMUL if SMP || !MMU config CPU_32v5 bool - select TLS_REG_EMUL if SMP || !MMU - select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select CPU_USE_DOMAINS if MMU + select NEEDS_SYSCALL_FOR_CMPXCHG if SMP + select TLS_REG_EMUL if SMP || !MMU config CPU_32v6 bool - select TLS_REG_EMUL if !CPU_32v6K && !MMU select CPU_USE_DOMAINS if CPU_V6 && MMU + select TLS_REG_EMUL if !CPU_32v6K && !MMU config CPU_32v6K bool @@ -644,8 +644,8 @@ config ARM_VIRT_EXT config SWP_EMULATE bool "Emulate SWP/SWPB instructions" depends on !CPU_USE_DOMAINS && CPU_V7 - select HAVE_PROC_CPU if PROC_FS default y if SMP + select HAVE_PROC_CPU if PROC_FS help ARMv6 architecture deprecates use of the SWP/SWPB instructions. ARMv7 multiprocessing extensions introduce the ability to disable diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index baf9064c0844..88e1e2e7a20d 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -10,16 +10,16 @@ choice config ARCH_IMX_V4_V5 bool "i.MX1, i.MX21, i.MX25, i.MX27" - select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT + select AUTO_ZRELADDR if !ZBOOT_ROM help This enables support for systems based on the Freescale i.MX ARMv4 and ARMv5 SoCs config ARCH_IMX_V6_V7 bool "i.MX3, i.MX5, i.MX6" - select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT + select AUTO_ZRELADDR if !ZBOOT_ROM select MIGHT_HAVE_CACHE_L2X0 help This enables support for systems based on the Freescale i.MX3, i.MX5 diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig index 6b46cee2f9cd..a35d9841f494 100644 --- a/arch/arm/plat-mxc/devices/Kconfig +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -3,8 +3,8 @@ config IMX_HAVE_PLATFORM_FEC default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53 config IMX_HAVE_PLATFORM_FLEXCAN - select HAVE_CAN_FLEXCAN if CAN bool + select HAVE_CAN_FLEXCAN if CAN config IMX_HAVE_PLATFORM_FSL_USB2_UDC bool diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig index 4c48c8b60b54..19f55cae5d73 100644 --- a/arch/arm/plat-nomadik/Kconfig +++ b/arch/arm/plat-nomadik/Kconfig @@ -5,8 +5,8 @@ config PLAT_NOMADIK bool depends on ARCH_NOMADIK || ARCH_U8500 - select CLKSRC_MMIO default y + select CLKSRC_MMIO help Common platform code for Nomadik and other ST-Ericsson platforms. diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index c9d1c3603bbf..7cd56ed5cd94 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -14,10 +14,10 @@ config ARCH_OMAP1 select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_IRQ_CHIP - select IRQ_DOMAIN select HAVE_IDE - select NEED_MACH_MEMORY_H + select IRQ_DOMAIN select NEED_MACH_IO_H if PCCARD + select NEED_MACH_MEMORY_H help "Systems based on omap7xx, omap15xx or omap16xx" @@ -25,10 +25,10 @@ config ARCH_OMAP2PLUS bool "TI OMAP2/3/4" select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP - select SPARSE_IRQ select OMAP_DM_TIMER - select USE_OF select PROC_DEVICETREE if PROC_FS + select SPARSE_IRQ + select USE_OF help "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5" @@ -43,8 +43,8 @@ config OMAP_DEBUG_DEVICES config OMAP_DEBUG_LEDS def_bool y if NEW_LEDS - select LEDS_CLASS depends on OMAP_DEBUG_DEVICES + select LEDS_CLASS config POWER_AVS_OMAP bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2" diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 21bf6adb9198..eef3b6a2f8a8 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -6,8 +6,8 @@ config PLAT_S3C24XX bool depends on ARCH_S3C24XX default y - select NO_IOPORT select ARCH_REQUIRE_GPIOLIB + select NO_IOPORT select S3C_DEV_NAND help Base platform code for any Samsung S3C24XX device diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 9c3b90c3538e..59401e1cc530 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -7,9 +7,9 @@ config PLAT_SAMSUNG bool depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P - select NO_IOPORT - select GENERIC_IRQ_CHIP default y + select GENERIC_IRQ_CHIP + select NO_IOPORT help Base platform code for all Samsung SoC based systems @@ -17,16 +17,16 @@ config PLAT_S5P bool depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) default y - select ARM_VIC if !ARCH_EXYNOS + select ARCH_REQUIRE_GPIOLIB select ARM_GIC if ARCH_EXYNOS + select ARM_VIC if !ARCH_EXYNOS select GIC_NON_BANKED if ARCH_EXYNOS4 select NO_IOPORT - select ARCH_REQUIRE_GPIOLIB + select PLAT_SAMSUNG select S3C_GPIO_TRACK select S5P_GPIO_DRVSTR - select SAMSUNG_GPIOLIB_4BIT - select PLAT_SAMSUNG select SAMSUNG_CLKSRC + select SAMSUNG_GPIOLIB_4BIT select SAMSUNG_IRQ_VIC_TIMER help Base platform code for Samsung's S5P series SoC. @@ -423,10 +423,10 @@ config S3C_DMA config SAMSUNG_DMADEV bool + select ARM_AMBA select DMADEVICES select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \ CPU_S5P6450 || CPU_S5P6440) - select ARM_AMBA help Use DMA device engine for PL330 DMAC. diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 4404f82d5979..f8db7b2deb36 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -12,10 +12,10 @@ config ARCH_SPEAR13XX bool "ST SPEAr13xx with Device Tree" select ARM_GIC select CPU_V7 - select USE_OF select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 select PINCTRL + select USE_OF help Supports for ARM's SPEAR13XX family @@ -23,8 +23,8 @@ config ARCH_SPEAR3XX bool "ST SPEAr3xx with Device Tree" select ARM_VIC select CPU_ARM926T - select USE_OF select PINCTRL + select USE_OF help Supports for ARM's SPEAR3XX family |