arm64: dts: rockchip: add rk3399-videostrong board support

Change-Id: I0b24ee2f926f3be4bc8d93064c2f5f8e51ffe2de
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>

1 files changed, 269 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-videostrong-linux.dts b/arch/arm64/boot/dts/rockchip/rk3399-videostrong-linux.dts
new file mode 100644
index 000000000000..6d1110bca172
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-videostrong-linux.dts
@@ -0,0 +1,269 @@
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "rk3399-sapphire.dtsi"
+#include "rk3399-linux.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rockchip RK3399 Videostrong Board (Linux Opensource)";
+	compatible = "rockchip,rk3399-videostrong-linux", "rockchip,rk3399";
+
+	fiq_debugger: fiq-debugger {
+		compatible = "rockchip,fiq-debugger";
+		rockchip,serial-id = <2>;
+		rockchip,signal-irq = <182>;
+		rockchip,wake-irq = <0>;
+		rockchip,irq-mode-enable = <1>;  /* If enable uart uses irq instead of fiq */
+		rockchip,baudrate = <1500000>;  /* Only 115200 and 1500000 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2c_xfer>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		button@0 {
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			gpio-key,wakeup = <1>;
+			debounce-interval = <100>;
+		};
+	};
+
+	hdmi_codec: hdmi-codec {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "HDMI-CODEC";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s2>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; /* GPIO0_B2 */
+	};
+
+	spdif-sound {
+		status = "okay";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "ROCKCHIP,SPDIF";
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		status = "okay";
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	vccadc_ref: vccadc-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	wireless-bluetooth {
+		compatible = "bluetooth-platdata";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		uart_rts_gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; /* GPIO2_C3 */
+		pinctrl-names = "default", "rts_gpio";
+		pinctrl-0 = <&uart0_rts>;
+		pinctrl-1 = <&uart0_gpios>;
+		BT,reset_gpio    = <&gpio0 9 GPIO_ACTIVE_HIGH>; /* GPIO0_B1 */
+		BT,wake_gpio     = <&gpio2 26 GPIO_ACTIVE_HIGH>; /* GPIO2_D2 */
+		BT,wake_host_irq = <&gpio0 4 GPIO_ACTIVE_HIGH>; /* GPIO0_A4 */
+		status = "okay";
+	};
+
+	wireless-wlan {
+		compatible = "wlan-platdata";
+		rockchip,grf = <&grf>;
+		wifi_chip_type = "ap6354";
+		sdio_vref = <1800>;
+		WIFI,host_wake_irq = <&gpio0 3 GPIO_ACTIVE_HIGH>; /* GPIO0_a3 */
+		status = "okay";
+	};
+};
+
+&dfi {
+	status = "okay";
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dmc {
+	status = "okay";
+	center-supply = <&vdd_center>;
+	upthreshold = <40>;
+	downdifferential = <20>;
+	system-status-freq = <
+		/* system status	freq(KHz) */
+		SYS_STATUS_NORMAL       800000
+		SYS_STATUS_REBOOT       528000
+		SYS_STATUS_SUSPEND      200000
+		SYS_STATUS_VIDEO_1080P  200000
+		SYS_STATUS_VIDEO_4K     600000
+		SYS_STATUS_VIDEO_4K_10B 800000
+		SYS_STATUS_PERFORMANCE  800000
+		SYS_STATUS_BOOST        400000
+		SYS_STATUS_DUALVIEW     600000
+		SYS_STATUS_ISP          600000
+	>;
+	vop-bw-dmc-freq = <
+	/* min_bw(MB/s) max_bw(MB/s) freq(KHz) */
+		0       577      200000
+		578     1701     300000
+		1702    99999    400000
+	>;
+	auto-min-freq = <200000>;
+};
+
+&hdmi {
+	/* remove the hdmi_cec, reused by edp_hpd */
+	pinctrl-0 = <&hdmi_i2c_xfer>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&i2s2 {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&rkvdec {
+	status = "okay";
+	/* 0 means ion, 1 means drm */
+	//allocator = <0>;
+};
+
+&rockchip_suspend {
+	status = "okay";
+	rockchip,sleep-debug-en = <1>;
+	rockchip,sleep-mode-config = <
+		(0
+		| RKPM_SLP_ARMPD
+		| RKPM_SLP_PERILPPD
+		| RKPM_SLP_DDR_RET
+		| RKPM_SLP_PLLPD
+		| RKPM_SLP_CENTER_PD
+		| RKPM_SLP_AP_PWROFF
+		)
+		>;
+	rockchip,wakeup-config = <
+		(0
+		| RKPM_GPIO_WKUP_EN
+		| RKPM_PWM_WKUP_EN
+		)
+		>;
+		rockchip,pwm-regulator-config = <
+		(0
+		| PWM2_REGULATOR_EN
+		)
+		>;
+		rockchip,power-ctrl =
+		<&gpio1 17 GPIO_ACTIVE_HIGH>,
+		<&gpio1 14 GPIO_ACTIVE_HIGH>;
+};
+
+&spdif {
+	status = "okay";
+	pinctrl-0 = <&spdif_bus>;
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	#sound-dai-cells = <0>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+	/* 0 means ion, 1 means drm */
+	//allocator = <0>;
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-bluetooth {
+		uart0_gpios: uart0-gpios {
+			rockchip,pins =
+				<2 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};