ARM64: rockchip: dts: re-order the nodes for RK3328 EVB

I re-order all the merged nodes in alphabetic order.

Change-Id: I677259b1ec3cd8463c8ef557a9c1f0afbef66318
Signed-off-by: Randy Li <randy.li@rock-chips.com>

1 files changed, 117 insertions, 117 deletions

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index 74ae0f86b4b8..1e28e1e18532 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -70,13 +70,6 @@
 		#clock-cells = <0>;
 	};
 
-	vcc_phy: vcc-phy-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_phy";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -91,15 +84,6 @@
 		reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
 	};
 
-	wireless-wlan {
-		compatible = "wlan-platdata";
-		rockchip,grf = <&grf>;
-		wifi_chip_type = "ap6354";
-		sdio_vref = <1800>;
-		WIFI,host_wake_irq = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,format = "i2s";
@@ -128,19 +112,25 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 	};
-};
 
-&i2s1 {
-	#sound-dai-cells = <0>;
-	status = "okay";
-};
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-&codec {
-	#sound-dai-cells = <0>;
-	status = "okay";
+	wireless-wlan {
+		compatible = "wlan-platdata";
+		rockchip,grf = <&grf>;
+		wifi_chip_type = "ap6354";
+		sdio_vref = <1800>;
+		WIFI,host_wake_irq = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
 };
 
-&spdif {
+&codec {
 	#sound-dai-cells = <0>;
 	status = "okay";
 };
@@ -149,35 +139,6 @@
 	cpu-supply = <&vdd_arm>;
 };
 
-&sdio {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	disable-wp;
-	keep-power-in-suspend;
-	max-frequency = <150000000>;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	num-slots = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
-	supports-sdio;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	disable-wp;
-	max-frequency = <150000000>;
-	num-slots = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
-	supports-sd;
-	status = "okay";
-};
-
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
@@ -211,69 +172,6 @@
 	mali-supply = <&vdd_logic>;
 };
 
-&io_domains {
-	status = "okay";
-
-	vccio1-supply = <&vcc_io>;
-	vccio2-supply = <&vcc_18emmc>;
-	vccio3-supply = <&vcc_io>;
-	vccio4-supply = <&vdd_18>;
-	vccio5-supply = <&vcc_io>;
-	vccio6-supply = <&vcc_io>;
-	pmuio-supply = <&vcc_io>;
-};
-
-&tsadc {
-	status = "okay";
-};
-
-&u2phy {
-	otg-vbus-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	u2phy_host: host-port {
-		status = "okay";
-	};
-
-	u2phy_otg: otg-port {
-		status = "okay";
-	};
-};
-
-&u3phy {
-	vbus-drv-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&u3phy_utmi {
-	status = "okay";
-};
-
-&u3phy_pipe {
-	status = "okay";
-};
-
-&usb20_otg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usbdrd3 {
-	status = "okay";
-};
-
-&usbdrd_dwc3 {
-	status = "okay";
-};
-
 &i2c1 {
 	status = "okay";
 
@@ -409,6 +307,23 @@
 	};
 };
 
+&i2s1 {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc_18emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vdd_18>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	pmuio-supply = <&vcc_io>;
+};
+
 &pinctrl {
 	pmic {
 		pmic_int_l: pmic-int-l {
@@ -424,3 +339,88 @@
 		};
 	};
 };
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	supports-sdio;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	supports-sd;
+	status = "okay";
+};
+
+&spdif {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	otg-vbus-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&u3phy {
+	vbus-drv-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&u3phy_utmi {
+	status = "okay";
+};
+
+&u3phy_pipe {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usbdrd3 {
+	status = "okay";
+};
+
+&usbdrd_dwc3 {
+	status = "okay";
+};