diff options
| author | Wyon Bi <bivvy.bi@rock-chips.com> | 2019-01-09 09:38:46 +0800 |
|---|---|---|
| committer | Wyon Bi <bivvy.bi@rock-chips.com> | 2019-01-09 09:41:24 +0800 |
| commit | fd31310414a5fb335d942bc1e220d87c32fc4a34 (patch) | |
| tree | 7ee4978e0e091add3f2a9a6d4e8bbc1332d6fe7c /Documentation | |
| parent | 15ee2dc07afe0dce5a3d9d1059a57da7014fbd62 (diff) | |
drm/bridge: lt8912: Use drm_add_modes_noedid instead of hard-coded mode
Change-Id: I7420a455c3e1928482e27f7ef9e3c996afe0c8a1
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/display/bridge/lontium,lt8912.txt | 21 |
1 files changed, 0 insertions, 21 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912.txt b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912.txt index 0d0378febadb..8a6a22610564 100644 --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912.txt +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912.txt @@ -5,7 +5,6 @@ Required properties: - reg: virtual channel id - reset-gpios: a GPIO spec for the reset pin - i2c-bus: phandle of an I2C controller used for register access - - display-timings : Refer to binding doc display-timing.txt for details Example: @@ -17,25 +16,5 @@ Example: reg = <0>; reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; i2c-bus = <&i2c1>; - - display-timings { - native-mode = <&timing0>; - - timing0: timing0 { - clock-frequency = <74250000>; - hactive = <1280>; - vactive = <720>; - hfront-porch = <110>; - hsync-len = <40>; - hback-porch = <220>; - vfront-porch = <5>; - vsync-len = <5>; - vback-porch = <20>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <0>; - pixelclk-active = <0>; - }; - }; }; }; |