summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-08-27 17:03:33 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-08-27 17:03:33 -0700
commitc3c162635f4f064af5c1d531be6355d6b23e3d0c (patch)
treef33464b15c6baaf55e2c330ee46a88828526c158
parentfff4e7a0e680b29bb8006cc37921562ef4b8e8df (diff)
parent2c68888f1d76c668024a9efa50af382df4f3cf8e (diff)
Merge tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/iio fixes from Greg KH: "Here are few small staging driver fixes, and some more IIO driver fixes for 4.13-rc7. Nothing major, just resolutions for some reported problems. All of these have been in linux-next with no reported problems" * tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: magnetometer: st_magn: remove ihl property for LSM303AGR iio: magnetometer: st_magn: fix status register address for LSM303AGR iio: hid-sensor-trigger: Fix the race with user space powering up sensors iio: trigger: stm32-timer: fix get trigger mode iio: imu: adis16480: Fix acceleration scale factor for adis16480 PATCH] iio: Fix some documentation warnings staging: rtl8188eu: add RNX-N150NUB support Revert "staging: fsl-mc: be consistent when checking strcmp() return" iio: adc: stm32: fix common clock rate iio: adc: ina219: Avoid underflow for sleeping time iio: trigger: stm32-timer: add enable attribute iio: trigger: stm32-timer: fix get/set down count direction iio: trigger: stm32-timer: fix write_raw return value iio: trigger: stm32-timer: fix quadrature mode get routine iio: bmp280: properly initialize device for humidity reading
-rw-r--r--drivers/iio/adc/ina2xx-adc.c2
-rw-r--r--drivers/iio/adc/stm32-adc-core.c10
-rw-r--r--drivers/iio/common/hid-sensors/hid-sensor-trigger.c8
-rw-r--r--drivers/iio/imu/adis16480.c2
-rw-r--r--drivers/iio/magnetometer/st_magn_core.c4
-rw-r--r--drivers/iio/pressure/bmp280-core.c27
-rw-r--r--drivers/iio/pressure/bmp280.h5
-rw-r--r--drivers/iio/trigger/stm32-timer-trigger.c82
-rw-r--r--drivers/staging/fsl-mc/bus/fsl-mc-allocator.c6
-rw-r--r--drivers/staging/rtl8188eu/os_dep/usb_intf.c1
-rw-r--r--include/linux/iio/iio.h2
-rw-r--r--include/linux/iio/trigger.h4
12 files changed, 107 insertions, 46 deletions
diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index 232c0b80d658..c3f86138cb55 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -644,7 +644,7 @@ static int ina2xx_capture_thread(void *data)
{
struct iio_dev *indio_dev = data;
struct ina2xx_chip_info *chip = iio_priv(indio_dev);
- unsigned int sampling_us = SAMPLING_PERIOD(chip);
+ int sampling_us = SAMPLING_PERIOD(chip);
int buffer_us;
/*
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index e09233b03c05..609676384f5e 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -64,7 +64,7 @@
#define STM32H7_CKMODE_MASK GENMASK(17, 16)
/* STM32 H7 maximum analog clock rate (from datasheet) */
-#define STM32H7_ADC_MAX_CLK_RATE 72000000
+#define STM32H7_ADC_MAX_CLK_RATE 36000000
/**
* stm32_adc_common_regs - stm32 common registers, compatible dependent data
@@ -148,14 +148,14 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev,
return -EINVAL;
}
- priv->common.rate = rate;
+ priv->common.rate = rate / stm32f4_pclk_div[i];
val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR);
val &= ~STM32F4_ADC_ADCPRE_MASK;
val |= i << STM32F4_ADC_ADCPRE_SHIFT;
writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR);
dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n",
- rate / (stm32f4_pclk_div[i] * 1000));
+ priv->common.rate / 1000);
return 0;
}
@@ -250,7 +250,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
out:
/* rate used later by each ADC instance to control BOOST mode */
- priv->common.rate = rate;
+ priv->common.rate = rate / div;
/* Set common clock mode and prescaler */
val = readl_relaxed(priv->common.base + STM32H7_ADC_CCR);
@@ -260,7 +260,7 @@ out:
writel_relaxed(val, priv->common.base + STM32H7_ADC_CCR);
dev_dbg(&pdev->dev, "Using %s clock/%d source at %ld kHz\n",
- ckmode ? "bus" : "adc", div, rate / (div * 1000));
+ ckmode ? "bus" : "adc", div, priv->common.rate / 1000);
return 0;
}
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index 16ade0a0327b..0e4b379ada45 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -111,8 +111,6 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
s32 poll_value = 0;
if (state) {
- if (!atomic_read(&st->user_requested_state))
- return 0;
if (sensor_hub_device_open(st->hsdev))
return -EIO;
@@ -161,6 +159,9 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
&report_val);
}
+ pr_debug("HID_SENSOR %s set power_state %d report_state %d\n",
+ st->pdev->name, state_val, report_val);
+
sensor_hub_get_feature(st->hsdev, st->power_state.report_id,
st->power_state.index,
sizeof(state_val), &state_val);
@@ -182,6 +183,7 @@ int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
ret = pm_runtime_get_sync(&st->pdev->dev);
else {
pm_runtime_mark_last_busy(&st->pdev->dev);
+ pm_runtime_use_autosuspend(&st->pdev->dev);
ret = pm_runtime_put_autosuspend(&st->pdev->dev);
}
if (ret < 0) {
@@ -285,8 +287,6 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
/* Default to 3 seconds, but can be changed from sysfs */
pm_runtime_set_autosuspend_delay(&attrb->pdev->dev,
3000);
- pm_runtime_use_autosuspend(&attrb->pdev->dev);
-
return ret;
error_unreg_trigger:
iio_trigger_unregister(trig);
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
index 8cf84d3488b2..12898424d838 100644
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -696,7 +696,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.gyro_max_val = IIO_RAD_TO_DEGREE(22500),
.gyro_max_scale = 450,
.accel_max_val = IIO_M_S_2_TO_G(12500),
- .accel_max_scale = 5,
+ .accel_max_scale = 10,
},
[ADIS16485] = {
.channels = adis16485_channels,
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 8e1b0861fbe4..c38563699984 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -356,9 +356,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
.drdy_irq = {
.addr = 0x62,
.mask_int1 = 0x01,
- .addr_ihl = 0x63,
- .mask_ihl = 0x04,
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .addr_stat_drdy = 0x67,
},
.multi_read_bit = false,
.bootime = 2,
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index d82b788374b6..0d2ea3ee371b 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -282,6 +282,11 @@ static int bmp280_read_temp(struct bmp280_data *data,
}
adc_temp = be32_to_cpu(tmp) >> 12;
+ if (adc_temp == BMP280_TEMP_SKIPPED) {
+ /* reading was skipped */
+ dev_err(data->dev, "reading temperature skipped\n");
+ return -EIO;
+ }
comp_temp = bmp280_compensate_temp(data, adc_temp);
/*
@@ -317,6 +322,11 @@ static int bmp280_read_press(struct bmp280_data *data,
}
adc_press = be32_to_cpu(tmp) >> 12;
+ if (adc_press == BMP280_PRESS_SKIPPED) {
+ /* reading was skipped */
+ dev_err(data->dev, "reading pressure skipped\n");
+ return -EIO;
+ }
comp_press = bmp280_compensate_press(data, adc_press);
*val = comp_press;
@@ -345,6 +355,11 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2)
}
adc_humidity = be16_to_cpu(tmp);
+ if (adc_humidity == BMP280_HUMIDITY_SKIPPED) {
+ /* reading was skipped */
+ dev_err(data->dev, "reading humidity skipped\n");
+ return -EIO;
+ }
comp_humidity = bmp280_compensate_humidity(data, adc_humidity);
*val = comp_humidity;
@@ -597,14 +612,20 @@ static const struct bmp280_chip_info bmp280_chip_info = {
static int bme280_chip_config(struct bmp280_data *data)
{
- int ret = bmp280_chip_config(data);
+ int ret;
u8 osrs = BMP280_OSRS_HUMIDITIY_X(data->oversampling_humid + 1);
+ /*
+ * Oversampling of humidity must be set before oversampling of
+ * temperature/pressure is set to become effective.
+ */
+ ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_HUMIDITY,
+ BMP280_OSRS_HUMIDITY_MASK, osrs);
+
if (ret < 0)
return ret;
- return regmap_update_bits(data->regmap, BMP280_REG_CTRL_HUMIDITY,
- BMP280_OSRS_HUMIDITY_MASK, osrs);
+ return bmp280_chip_config(data);
}
static const struct bmp280_chip_info bme280_chip_info = {
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index 2c770e13be0e..61347438b779 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -96,6 +96,11 @@
#define BME280_CHIP_ID 0x60
#define BMP280_SOFT_RESET_VAL 0xB6
+/* BMP280 register skipped special values */
+#define BMP280_TEMP_SKIPPED 0x80000
+#define BMP280_PRESS_SKIPPED 0x80000
+#define BMP280_HUMIDITY_SKIPPED 0x8000
+
/* Regmap configurations */
extern const struct regmap_config bmp180_regmap_config;
extern const struct regmap_config bmp280_regmap_config;
diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c
index d22bc56dd9fc..25ad6abfee22 100644
--- a/drivers/iio/trigger/stm32-timer-trigger.c
+++ b/drivers/iio/trigger/stm32-timer-trigger.c
@@ -366,34 +366,32 @@ static int stm32_counter_read_raw(struct iio_dev *indio_dev,
int *val, int *val2, long mask)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
+ u32 dat;
switch (mask) {
case IIO_CHAN_INFO_RAW:
- {
- u32 cnt;
-
- regmap_read(priv->regmap, TIM_CNT, &cnt);
- *val = cnt;
+ regmap_read(priv->regmap, TIM_CNT, &dat);
+ *val = dat;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_ENABLE:
+ regmap_read(priv->regmap, TIM_CR1, &dat);
+ *val = (dat & TIM_CR1_CEN) ? 1 : 0;
return IIO_VAL_INT;
- }
- case IIO_CHAN_INFO_SCALE:
- {
- u32 smcr;
- regmap_read(priv->regmap, TIM_SMCR, &smcr);
- smcr &= TIM_SMCR_SMS;
+ case IIO_CHAN_INFO_SCALE:
+ regmap_read(priv->regmap, TIM_SMCR, &dat);
+ dat &= TIM_SMCR_SMS;
*val = 1;
*val2 = 0;
/* in quadrature case scale = 0.25 */
- if (smcr == 3)
+ if (dat == 3)
*val2 = 2;
return IIO_VAL_FRACTIONAL_LOG2;
}
- }
return -EINVAL;
}
@@ -403,15 +401,31 @@ static int stm32_counter_write_raw(struct iio_dev *indio_dev,
int val, int val2, long mask)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
+ u32 dat;
switch (mask) {
case IIO_CHAN_INFO_RAW:
- regmap_write(priv->regmap, TIM_CNT, val);
+ return regmap_write(priv->regmap, TIM_CNT, val);
- return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
/* fixed scale */
return -EINVAL;
+
+ case IIO_CHAN_INFO_ENABLE:
+ if (val) {
+ regmap_read(priv->regmap, TIM_CR1, &dat);
+ if (!(dat & TIM_CR1_CEN))
+ clk_enable(priv->clk);
+ regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN,
+ TIM_CR1_CEN);
+ } else {
+ regmap_read(priv->regmap, TIM_CR1, &dat);
+ regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN,
+ 0);
+ if (dat & TIM_CR1_CEN)
+ clk_disable(priv->clk);
+ }
+ return 0;
}
return -EINVAL;
@@ -471,7 +485,7 @@ static int stm32_get_trigger_mode(struct iio_dev *indio_dev,
regmap_read(priv->regmap, TIM_SMCR, &smcr);
- return smcr == TIM_SMCR_SMS ? 0 : -EINVAL;
+ return (smcr & TIM_SMCR_SMS) == TIM_SMCR_SMS ? 0 : -EINVAL;
}
static const struct iio_enum stm32_trigger_mode_enum = {
@@ -507,9 +521,19 @@ static int stm32_set_enable_mode(struct iio_dev *indio_dev,
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
int sms = stm32_enable_mode2sms(mode);
+ u32 val;
if (sms < 0)
return sms;
+ /*
+ * Triggered mode sets CEN bit automatically by hardware. So, first
+ * enable counter clock, so it can use it. Keeps it in sync with CEN.
+ */
+ if (sms == 6) {
+ regmap_read(priv->regmap, TIM_CR1, &val);
+ if (!(val & TIM_CR1_CEN))
+ clk_enable(priv->clk);
+ }
regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms);
@@ -571,11 +595,14 @@ static int stm32_get_quadrature_mode(struct iio_dev *indio_dev,
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
u32 smcr;
+ int mode;
regmap_read(priv->regmap, TIM_SMCR, &smcr);
- smcr &= TIM_SMCR_SMS;
+ mode = (smcr & TIM_SMCR_SMS) - 1;
+ if ((mode < 0) || (mode > ARRAY_SIZE(stm32_quadrature_modes)))
+ return -EINVAL;
- return smcr - 1;
+ return mode;
}
static const struct iio_enum stm32_quadrature_mode_enum = {
@@ -592,13 +619,20 @@ static const char *const stm32_count_direction_states[] = {
static int stm32_set_count_direction(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
- unsigned int mode)
+ unsigned int dir)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
+ u32 val;
+ int mode;
- regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_DIR, mode);
+ /* In encoder mode, direction is RO (given by TI1/TI2 signals) */
+ regmap_read(priv->regmap, TIM_SMCR, &val);
+ mode = (val & TIM_SMCR_SMS) - 1;
+ if ((mode >= 0) || (mode < ARRAY_SIZE(stm32_quadrature_modes)))
+ return -EBUSY;
- return 0;
+ return regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_DIR,
+ dir ? TIM_CR1_DIR : 0);
}
static int stm32_get_count_direction(struct iio_dev *indio_dev,
@@ -609,7 +643,7 @@ static int stm32_get_count_direction(struct iio_dev *indio_dev,
regmap_read(priv->regmap, TIM_CR1, &cr1);
- return (cr1 & TIM_CR1_DIR);
+ return ((cr1 & TIM_CR1_DIR) ? 1 : 0);
}
static const struct iio_enum stm32_count_direction_enum = {
@@ -672,7 +706,9 @@ static const struct iio_chan_spec_ext_info stm32_trigger_count_info[] = {
static const struct iio_chan_spec stm32_trigger_channel = {
.type = IIO_COUNT,
.channel = 0,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_ENABLE) |
+ BIT(IIO_CHAN_INFO_SCALE),
.ext_info = stm32_trigger_count_info,
.indexed = 1
};
diff --git a/drivers/staging/fsl-mc/bus/fsl-mc-allocator.c b/drivers/staging/fsl-mc/bus/fsl-mc-allocator.c
index b37a6f48225f..8ea3920400a0 100644
--- a/drivers/staging/fsl-mc/bus/fsl-mc-allocator.c
+++ b/drivers/staging/fsl-mc/bus/fsl-mc-allocator.c
@@ -16,9 +16,9 @@
static bool __must_check fsl_mc_is_allocatable(const char *obj_type)
{
- return strcmp(obj_type, "dpbp") ||
- strcmp(obj_type, "dpmcp") ||
- strcmp(obj_type, "dpcon");
+ return strcmp(obj_type, "dpbp") == 0 ||
+ strcmp(obj_type, "dpmcp") == 0 ||
+ strcmp(obj_type, "dpcon") == 0;
}
/**
diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
index d283341cfe43..56cd4e5e51b2 100644
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -45,6 +45,7 @@ static struct usb_device_id rtw_usb_id_tbl[] = {
{USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
{USB_DEVICE(0x2357, 0x010c)}, /* TP-Link TL-WN722N v2 */
{USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */
+ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0xffef)}, /* Rosewill RNX-N150NUB */
{} /* Terminating entry */
};
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index d68bec297a45..c380daa40c0e 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -535,7 +535,7 @@ struct iio_buffer_setup_ops {
* @scan_timestamp: [INTERN] set if any buffers have requested timestamp
* @scan_index_timestamp:[INTERN] cache of the index to the timestamp
* @trig: [INTERN] current device trigger (buffer modes)
- * @trig_readonly [INTERN] mark the current trigger immutable
+ * @trig_readonly: [INTERN] mark the current trigger immutable
* @pollfunc: [DRIVER] function run on trigger being received
* @pollfunc_event: [DRIVER] function run on events trigger being received
* @channels: [DRIVER] channel specification structure table
diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h
index ea08302f2d7b..7142d8d6e470 100644
--- a/include/linux/iio/trigger.h
+++ b/include/linux/iio/trigger.h
@@ -144,8 +144,8 @@ void devm_iio_trigger_unregister(struct device *dev,
/**
* iio_trigger_set_immutable() - set an immutable trigger on destination
*
- * @indio_dev - IIO device structure containing the device
- * @trig - trigger to assign to device
+ * @indio_dev: IIO device structure containing the device
+ * @trig: trigger to assign to device
*
**/
int iio_trigger_set_immutable(struct iio_dev *indio_dev, struct iio_trigger *trig);