diff options
| author | Roland Dreier <rdreier@cisco.com> | 2007-10-12 14:47:25 -0700 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2007-11-16 09:30:20 -0800 |
| commit | 306a49e91130973abd5e1ca8be299e062afdef52 (patch) | |
| tree | 3e41dd5929208712f72f9b2ad2a927d3d1e661f8 | |
| parent | a8ebc7bceb104fa5e1ef1ce116d3fd85f2081af2 (diff) | |
IB/mthca: Use mmiowb() to avoid firmware commands getting jumbled up
Upstream as 76d7cc0345a037e8eea426f8abc710abd22946dd
Firmware commands are sent to the HCA by writing multiple words to a
command register block. Access to this block of registers is
serialized with a mutex. However, on large SGI systems, problems were
seen with multiple CPUs issuing FW commands at the same time, because
the writes to the register block may be reordered within the system
interconnect and reach the HCA in a different order than they were
issued (even with the mutex). Fix this by adding an mmiowb() before
dropping the mutex.
Tested-by: Arthur Kepner <akepner@sgi.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| -rw-r--r-- | drivers/infiniband/hw/mthca/mthca_cmd.c | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index acc95892713a..6966f943f440 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -290,6 +290,12 @@ static int mthca_cmd_post(struct mthca_dev *dev, err = mthca_cmd_post_hcr(dev, in_param, out_param, in_modifier, op_modifier, op, token, event); + /* + * Make sure that our HCR writes don't get mixed in with + * writes from another CPU starting a FW command. + */ + mmiowb(); + mutex_unlock(&dev->cmd.hcr_mutex); return err; } |