summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-01-24 12:50:56 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2016-01-24 12:50:56 -0800
commite2464688b59c6ae9928f385dabf5355e30cff298 (patch)
tree1039fa8c818e6ac16d6f1504c28e80bfe902b0f3
parente1c10879ed59436cde537b723545430b04d4dec0 (diff)
parent07d17f09691e549fac0101333eebe0161a472b50 (diff)
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt67
-rw-r--r--Documentation/devicetree/bindings/mips/pic32/microchip,pic32mzda.txt31
-rw-r--r--Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt26
-rw-r--r--Documentation/devicetree/bindings/net/ralink,rt2880-net.txt61
-rw-r--r--Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt32
-rw-r--r--Documentation/devicetree/bindings/phy/phy-ath79-usb.txt18
-rw-r--r--Documentation/kernel-parameters.txt35
-rw-r--r--MAINTAINERS22
-rw-r--r--arch/mips/Kbuild.platforms1
-rw-r--r--arch/mips/Kconfig17
-rw-r--r--arch/mips/Makefile10
-rw-r--r--arch/mips/alchemy/common/gpiolib.c6
-rw-r--r--arch/mips/ar7/gpio.c2
-rw-r--r--arch/mips/ath79/common.h1
-rw-r--r--arch/mips/ath79/irq.c61
-rw-r--r--arch/mips/ath79/setup.c11
-rw-r--r--arch/mips/bcm47xx/sprom.c12
-rw-r--r--arch/mips/bcm63xx/nvram.c46
-rw-r--r--arch/mips/bmips/setup.c1
-rw-r--r--arch/mips/boot/compressed/Makefile15
-rw-r--r--arch/mips/boot/compressed/uart-prom.c7
-rw-r--r--arch/mips/boot/dts/Makefile1
-rw-r--r--arch/mips/boot/dts/brcm/bcm6328.dtsi9
-rw-r--r--arch/mips/boot/dts/brcm/bcm6368.dtsi22
-rw-r--r--arch/mips/boot/dts/ingenic/ci20.dts64
-rw-r--r--arch/mips/boot/dts/ingenic/jz4780.dtsi26
-rw-r--r--arch/mips/boot/dts/pic32/Makefile12
-rw-r--r--arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi236
-rw-r--r--arch/mips/boot/dts/pic32/pic32mzda.dtsi281
-rw-r--r--arch/mips/boot/dts/pic32/pic32mzda_sk.dts151
-rw-r--r--arch/mips/boot/dts/qca/ar9132.dtsi26
-rw-r--r--arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts8
-rw-r--r--arch/mips/configs/pic32mzda_defconfig89
-rw-r--r--arch/mips/include/asm/cacheops.h106
-rw-r--r--arch/mips/include/asm/cpu-features.h7
-rw-r--r--arch/mips/include/asm/cpu.h2
-rw-r--r--arch/mips/include/asm/elf.h15
-rw-r--r--arch/mips/include/asm/fpu_emulator.h2
-rw-r--r--arch/mips/include/asm/io.h1
-rw-r--r--arch/mips/include/asm/irqflags.h30
-rw-r--r--arch/mips/include/asm/kvm_host.h39
-rw-r--r--arch/mips/include/asm/mach-ath79/ath79.h1
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h2
-rw-r--r--arch/mips/include/asm/mach-pic32/cpu-feature-overrides.h32
-rw-r--r--arch/mips/include/asm/mach-pic32/irq.h22
-rw-r--r--arch/mips/include/asm/mach-pic32/pic32.h44
-rw-r--r--arch/mips/include/asm/mach-pic32/spaces.h24
-rw-r--r--arch/mips/include/asm/mach-ralink/irq.h9
-rw-r--r--arch/mips/include/asm/mach-ralink/mt7621.h38
-rw-r--r--arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h65
-rw-r--r--arch/mips/include/asm/mips-cm.h4
-rw-r--r--arch/mips/include/asm/mips-r2-to-r6-emul.h2
-rw-r--r--arch/mips/include/asm/mipsregs.h34
-rw-r--r--arch/mips/include/asm/page.h2
-rw-r--r--arch/mips/include/asm/pgtable.h4
-rw-r--r--arch/mips/include/uapi/asm/inst.h15
-rw-r--r--arch/mips/kernel/cpu-bugs64.c8
-rw-r--r--arch/mips/kernel/cpu-probe.c161
-rw-r--r--arch/mips/kernel/elf.c102
-rw-r--r--arch/mips/kernel/gpio_txx9.c2
-rw-r--r--arch/mips/kernel/ptrace.c3
-rw-r--r--arch/mips/kernel/setup.c2
-rw-r--r--arch/mips/kernel/smp-cps.c3
-rw-r--r--arch/mips/kernel/sync-r4k.c32
-rw-r--r--arch/mips/kernel/traps.c52
-rw-r--r--arch/mips/kvm/callback.c2
-rw-r--r--arch/mips/kvm/dyntrans.c10
-rw-r--r--arch/mips/kvm/emulate.c116
-rw-r--r--arch/mips/kvm/interrupt.c8
-rw-r--r--arch/mips/kvm/locore.S12
-rw-r--r--arch/mips/kvm/mips.c38
-rw-r--r--arch/mips/kvm/opcode.h22
-rw-r--r--arch/mips/kvm/tlb.c77
-rw-r--r--arch/mips/kvm/trap_emul.c1
-rw-r--r--arch/mips/lib/mips-atomic.c30
-rw-r--r--arch/mips/loongson64/Platform21
-rw-r--r--arch/mips/loongson64/loongson-3/hpet.c10
-rw-r--r--arch/mips/loongson64/loongson-3/smp.c20
-rw-r--r--arch/mips/math-emu/cp1emu.c4
-rw-r--r--arch/mips/math-emu/dp_simple.c38
-rw-r--r--arch/mips/math-emu/dp_tint.c9
-rw-r--r--arch/mips/math-emu/dp_tlong.c9
-rw-r--r--arch/mips/math-emu/dsemul.c77
-rw-r--r--arch/mips/math-emu/ieee754.c6
-rw-r--r--arch/mips/math-emu/ieee754.h42
-rw-r--r--arch/mips/math-emu/ieee754dp.c12
-rw-r--r--arch/mips/math-emu/ieee754int.h12
-rw-r--r--arch/mips/math-emu/ieee754sp.c12
-rw-r--r--arch/mips/math-emu/sp_fdp.c13
-rw-r--r--arch/mips/math-emu/sp_simple.c38
-rw-r--r--arch/mips/math-emu/sp_tint.c9
-rw-r--r--arch/mips/math-emu/sp_tlong.c9
-rw-r--r--arch/mips/mm/tlbex.c2
-rw-r--r--arch/mips/pci/Makefile1
-rw-r--r--arch/mips/pci/pci-mt7620.c426
-rw-r--r--arch/mips/pic32/Kconfig51
-rw-r--r--arch/mips/pic32/Makefile6
-rw-r--r--arch/mips/pic32/Platform7
-rw-r--r--arch/mips/pic32/common/Makefile5
-rw-r--r--arch/mips/pic32/common/irq.c21
-rw-r--r--arch/mips/pic32/common/reset.c62
-rw-r--r--arch/mips/pic32/pic32mzda/Makefile9
-rw-r--r--arch/mips/pic32/pic32mzda/config.c126
-rw-r--r--arch/mips/pic32/pic32mzda/early_clk.c106
-rw-r--r--arch/mips/pic32/pic32mzda/early_console.c171
-rw-r--r--arch/mips/pic32/pic32mzda/early_pin.c275
-rw-r--r--arch/mips/pic32/pic32mzda/early_pin.h241
-rw-r--r--arch/mips/pic32/pic32mzda/init.c156
-rw-r--r--arch/mips/pic32/pic32mzda/pic32mzda.h29
-rw-r--r--arch/mips/pic32/pic32mzda/time.c73
-rw-r--r--arch/mips/ralink/Kconfig16
-rw-r--r--arch/mips/ralink/Makefile10
-rw-r--r--arch/mips/ralink/Platform5
-rw-r--r--arch/mips/ralink/irq-gic.c25
-rw-r--r--arch/mips/ralink/mt7620.c87
-rw-r--r--arch/mips/ralink/mt7621.c226
-rw-r--r--arch/mips/ralink/rt288x.c2
-rw-r--r--arch/mips/ralink/rt305x.c1
-rw-r--r--arch/mips/ralink/rt3883.c1
-rw-r--r--arch/mips/ralink/timer-gic.c24
-rw-r--r--arch/mips/rb532/gpio.c2
-rw-r--r--arch/mips/txx9/generic/setup.c2
-rw-r--r--drivers/irqchip/Kconfig5
-rw-r--r--drivers/irqchip/Makefile1
-rw-r--r--drivers/irqchip/irq-pic32-evic.c324
-rw-r--r--drivers/mtd/bcm63xxpart.c8
-rw-r--r--fs/binfmt_elf.c6
-rw-r--r--include/linux/bcm963xx_nvram.h112
-rw-r--r--include/linux/bcm963xx_tag.h (renamed from arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h)24
-rw-r--r--include/linux/platform_data/sdhci-pic32.h22
130 files changed, 4923 insertions, 676 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
new file mode 100644
index 000000000000..c3a1b37c4c35
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
@@ -0,0 +1,67 @@
+Microchip PIC32 Interrupt Controller
+====================================
+
+The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller (EVIC).
+It handles all internal and external interrupts. This controller exists outside
+of the CPU and is the arbitrator of all interrupts (including interrupts from
+the CPU itself) before they are presented to the CPU.
+
+External interrupts have a software configurable edge polarity. Non external
+interrupts have a type and polarity that is determined by the source of the
+interrupt.
+
+Required properties
+-------------------
+
+- compatible: Should be "microchip,pic32mzda-evic"
+- reg: Specifies physical base address and size of register range.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt cells: Specifies the number of cells used to encode an interrupt
+ source connected to this controller. The value shall be 2 and interrupt
+ descriptor shall have the following format:
+
+ <hw_irq irq_type>
+
+ hw_irq - represents the hardware interrupt number as in the data sheet.
+ irq_type - is used to describe the type and polarity of an interrupt. For
+ internal interrupts use IRQ_TYPE_EDGE_RISING for non persistent interrupts and
+ IRQ_TYPE_LEVEL_HIGH for persistent interrupts. For external interrupts use
+ IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING to select the desired polarity.
+
+Optional properties
+-------------------
+- microchip,external-irqs: u32 array of external interrupts with software
+ polarity configuration. This array corresponds to the bits in the INTCON
+ SFR.
+
+Example
+-------
+
+evic: interrupt-controller@1f810000 {
+ compatible = "microchip,pic32mzda-evic";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1f810000 0x1000>;
+ microchip,external-irqs = <3 8 13 18 23>;
+};
+
+Each device/peripheral must request its interrupt line with the associated type
+and polarity.
+
+Internal interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+ ...
+ interrupts = <113 IRQ_TYPE_LEVEL_HIGH>;
+ ...
+};
+
+External interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+ ...
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ ...
+};
diff --git a/Documentation/devicetree/bindings/mips/pic32/microchip,pic32mzda.txt b/Documentation/devicetree/bindings/mips/pic32/microchip,pic32mzda.txt
new file mode 100644
index 000000000000..1c8dbc45feec
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/pic32/microchip,pic32mzda.txt
@@ -0,0 +1,31 @@
+* Microchip PIC32MZDA Platforms
+
+PIC32MZDA Starter Kit
+Required root node properties:
+ - compatible = "microchip,pic32mzda-sk", "microchip,pic32mzda"
+
+CPU nodes:
+----------
+A "cpus" node is required. Required properties:
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+A CPU sub-node is also required. Required properties:
+ - device_type: Must be "cpu".
+ - compatible: Must be "mti,mips14KEc".
+Example:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "mti,mips14KEc";
+ };
+ };
+
+Boot protocol
+--------------
+In accordance with Unified Hosting Interface Reference Manual (MD01069), the
+bootloader must pass the following arguments to the kernel:
+ - $a0: -2.
+ - $a1: KSEG0 address of the flattened device-tree blob.
diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
new file mode 100644
index 000000000000..aa6313024176
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
@@ -0,0 +1,26 @@
+Mediatek Gigabit Switch
+=======================
+
+The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
+
+Required properties:
+- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the gigabit switches interrupt
+- resets: Should contain the gigabit switches resets
+- reset-names: Should contain the reset names "gsw"
+
+Example:
+
+gsw@10110000 {
+ compatible = "ralink,mt7620-gsw";
+ reg = <0x10110000 8000>;
+
+ resets = <&rstctrl 23>;
+ reset-names = "gsw";
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+};
diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
new file mode 100644
index 000000000000..88b095d1f13b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
@@ -0,0 +1,61 @@
+Ralink Frame Engine Ethernet controller
+=======================================
+
+The Ralink frame engine ethernet controller can be found on Ralink and
+Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8).
+
+Depending on the SoC, there is a number of ports connected to the CPU port
+directly and/or via a (gigabit-)switch.
+
+* Ethernet controller node
+
+Required properties:
+- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth",
+ "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
+ "mediatek,mt7620-eth", "mediatek,mt7621-eth"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the frame engines interrupt
+- resets: Should contain the frame engines resets
+- reset-names: Should contain the reset names "fe". If a switch is present
+ "esw" is also required.
+
+
+* Ethernet port node
+
+Required properties:
+- compatible: Should be "ralink,eth-port"
+- reg: The number of the physical port
+- phy-handle: reference to the node describing the phy
+
+Example:
+
+mdio-bus {
+ ...
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
+ };
+};
+
+ethernet@400000 {
+ compatible = "ralink,rt2880-eth";
+ reg = <0x00400000 10000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ resets = <&rstctrl 18>;
+ reset-names = "fe";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <5>;
+
+ port@0 {
+ compatible = "ralink,eth-port";
+ reg = <0>;
+ phy-handle = <&phy0>;
+ };
+
+};
diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
new file mode 100644
index 000000000000..2e79bd376c56
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
@@ -0,0 +1,32 @@
+Ralink Fast Ethernet Embedded Switch
+====================================
+
+The ralink fast ethernet embedded switch can be found on Ralink and Mediatek
+SoCs (RT3x5x, RT5350, MT76x8).
+
+Required properties:
+- compatible: Should be "ralink,rt3050-esw"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the embedded switches interrupt
+- resets: Should contain the embedded switches resets
+- reset-names: Should contain the reset names "esw"
+
+Optional properties:
+- ralink,portmap: can be used to choose if the default switch setup is
+ llllw or wllll
+- ralink,led_polarity: override the active high/low settings of the leds
+
+Example:
+
+esw@10110000 {
+ compatible = "ralink,rt3050-esw";
+ reg = <0x10110000 8000>;
+
+ resets = <&rstctrl 23>;
+ reset-names = "esw";
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+};
diff --git a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
new file mode 100644
index 000000000000..cafe2197dad9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
@@ -0,0 +1,18 @@
+* Atheros AR71XX/9XXX USB PHY
+
+Required properties:
+- compatible: "qca,ar7100-usb-phy"
+- #phys-cells: should be 0
+- reset-names: "usb-phy"[, "usb-suspend-override"]
+- resets: references to the reset controllers
+
+Example:
+
+ usb-phy {
+ compatible = "qca,ar7100-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index cfb2c0f1a4a8..87d40a72f6a1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1454,6 +1454,41 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
In such case C2/C3 won't be used again.
idle=nomwait: Disable mwait for CPU C-states
+ ieee754= [MIPS] Select IEEE Std 754 conformance mode
+ Format: { strict | legacy | 2008 | relaxed }
+ Default: strict
+
+ Choose which programs will be accepted for execution
+ based on the IEEE 754 NaN encoding(s) supported by
+ the FPU and the NaN encoding requested with the value
+ of an ELF file header flag individually set by each
+ binary. Hardware implementations are permitted to
+ support either or both of the legacy and the 2008 NaN
+ encoding mode.
+
+ Available settings are as follows:
+ strict accept binaries that request a NaN encoding
+ supported by the FPU
+ legacy only accept legacy-NaN binaries, if supported
+ by the FPU
+ 2008 only accept 2008-NaN binaries, if supported
+ by the FPU
+ relaxed accept any binaries regardless of whether
+ supported by the FPU
+
+ The FPU emulator is always able to support both NaN
+ encodings, so if no FPU hardware is present or it has
+ been disabled with 'nofpu', then the settings of
+ 'legacy' and '2008' strap the emulator accordingly,
+ 'relaxed' straps the emulator for both legacy-NaN and
+ 2008-NaN, whereas 'strict' enables legacy-NaN only on
+ legacy processors and both NaN encodings on MIPS32 or
+ MIPS64 CPUs.
+
+ The setting for ABS.fmt/NEG.fmt instruction execution
+ mode generally follows that for the NaN encoding,
+ except where unsupported by hardware.
+
ignore_loglevel [KNL]
Ignore loglevel setting - this will print /all/
kernel messages to the console. Useful for debugging.
diff --git a/MAINTAINERS b/MAINTAINERS
index 78f71f471bd6..30aca4aa5467 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2420,6 +2420,8 @@ F: arch/mips/kernel/*bmips*
F: arch/mips/boot/dts/brcm/bcm*.dts*
F: drivers/irqchip/irq-bcm7*
F: drivers/irqchip/irq-brcmstb*
+F: include/linux/bcm963xx_nvram.h
+F: include/linux/bcm963xx_tag.h
BROADCOM TG3 GIGABIT ETHERNET DRIVER
M: Prashant Sreedharan <prashant@broadcom.com>
@@ -6216,6 +6218,14 @@ F: arch/arm64/include/uapi/asm/kvm*
F: arch/arm64/include/asm/kvm*
F: arch/arm64/kvm/
+KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
+M: James Hogan <james.hogan@imgtec.com>
+L: linux-mips@linux-mips.org
+S: Supported
+F: arch/mips/include/uapi/asm/kvm*
+F: arch/mips/include/asm/kvm*
+F: arch/mips/kvm/
+
KEXEC
M: Eric Biederman <ebiederm@xmission.com>
W: http://kernel.org/pub/linux/utils/kernel/kexec/
@@ -6313,6 +6323,12 @@ S: Maintained
F: net/l3mdev
F: include/net/l3mdev.h
+LANTIQ MIPS ARCHITECTURE
+M: John Crispin <blogic@openwrt.org>
+L: linux-mips@linux-mips.org
+S: Maintained
+F: arch/mips/lantiq
+
LAPB module
L: linux-x25@vger.kernel.org
S: Orphan
@@ -8997,6 +9013,12 @@ L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/fbdev/aty/aty128fb.c
+RALINK MIPS ARCHITECTURE
+M: John Crispin <blogic@openwrt.org>
+L: linux-mips@linux-mips.org
+S: Maintained
+F: arch/mips/ralink
+
RALINK RT2X00 WIRELESS LAN DRIVER
P: rt2x00 project
M: Stanislaw Gruszka <sgruszka@redhat.com>
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index a96c81d1d22e..c5cd63a4b6d5 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -21,6 +21,7 @@ platforms += mti-malta
platforms += mti-sead3
platforms += netlogic
platforms += paravirt
+platforms += pic32
platforms += pistachio
platforms += pmcs-msp71xx
platforms += pnx833x
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index fbf3f6670b69..57a945e832f4 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -169,6 +169,7 @@ config BMIPS_GENERIC
select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+ select ARCH_WANT_OPTIONAL_GPIOLIB
help
Build a generic DT-based kernel image that boots on select
BCM33xx cable modem chips, BCM63xx DSL chips, and BCM7xxx set-top
@@ -480,6 +481,14 @@ config MIPS_MALTA
This enables support for the MIPS Technologies Malta evaluation
board.
+config MACH_PIC32
+ bool "Microchip PIC32 Family"
+ help
+ This enables support for the Microchip PIC32 family of platforms.
+
+ Microchip PIC32 is a family of general-purpose 32 bit MIPS core
+ microcontrollers.
+
config MIPS_SEAD3
bool "MIPS SEAD3 board"
select BOOT_ELF32
@@ -979,6 +988,7 @@ source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig"
source "arch/mips/lasat/Kconfig"
+source "arch/mips/pic32/Kconfig"
source "arch/mips/pistachio/Kconfig"
source "arch/mips/pmcs-msp71xx/Kconfig"
source "arch/mips/ralink/Kconfig"
@@ -1755,6 +1765,10 @@ config SYS_SUPPORTS_ZBOOT_UART16550
bool
select SYS_SUPPORTS_ZBOOT
+config SYS_SUPPORTS_ZBOOT_UART_PROM
+ bool
+ select SYS_SUPPORTS_ZBOOT
+
config CPU_LOONGSON2
bool
select CPU_SUPPORTS_32BIT_KERNEL
@@ -2017,7 +2031,8 @@ config KVM_GUEST
bool "KVM Guest Kernel"
depends on BROKEN_ON_SMP
help
- Select this option if building a guest kernel for KVM (Trap & Emulate) mode
+ Select this option if building a guest kernel for KVM (Trap & Emulate)
+ mode.
config KVM_GUEST_TIMER_FREQ
int "Count/Compare Timer Frequency (MHz)"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 3f70ba54ae21..e78d60dbdffd 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -166,16 +166,6 @@ cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
endif
cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap
-#
-# binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a
-# as MIPS64 R1; older versions as just R1. This leaves the possibility open
-# that GCC might generate R2 code for -march=loongson3a which then is rejected
-# by GAS. The cc-option can't probe for this behaviour so -march=loongson3a
-# can't easily be used safely within the kbuild framework.
-#
-cflags-$(CONFIG_CPU_LOONGSON3) += \
- $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
- -Wa,-mips64r2 -Wa,--trap
cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c
index f9bc4f520440..84548f704035 100644
--- a/arch/mips/alchemy/common/gpiolib.c
+++ b/arch/mips/alchemy/common/gpiolib.c
@@ -40,7 +40,7 @@
static int gpio2_get(struct gpio_chip *chip, unsigned offset)
{
- return alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
+ return !!alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
}
static void gpio2_set(struct gpio_chip *chip, unsigned offset, int value)
@@ -68,7 +68,7 @@ static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset)
static int gpio1_get(struct gpio_chip *chip, unsigned offset)
{
- return alchemy_gpio1_get_value(offset + ALCHEMY_GPIO1_BASE);
+ return !!alchemy_gpio1_get_value(offset + ALCHEMY_GPIO1_BASE);
}
static void gpio1_set(struct gpio_chip *chip,
@@ -119,7 +119,7 @@ struct gpio_chip alchemy_gpio_chip[] = {
static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off)
{
- return au1300_gpio_get_value(off + AU1300_GPIO_BASE);
+ return !!au1300_gpio_get_value(off + AU1300_GPIO_BASE);
}
static void alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v)
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
index f4930456eb8e..f969f583c68c 100644
--- a/arch/mips/ar7/gpio.c
+++ b/arch/mips/ar7/gpio.c
@@ -37,7 +37,7 @@ static int ar7_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
container_of(chip, struct ar7_gpio_chip, chip);
void __iomem *gpio_in = gpch->regs + AR7_GPIO_INPUT;
- return readl(gpio_in) & (1 << gpio);
+ return !!(readl(gpio_in) & (1 << gpio));
}
static int titan_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
diff --git a/arch/mips/ath79/common.h b/arch/mips/ath79/common.h
index ca7cc19adfea..870c6b2e97e8 100644
--- a/arch/mips/ath79/common.h
+++ b/arch/mips/ath79/common.h
@@ -23,7 +23,6 @@ void ath79_clocks_init(void);
unsigned long ath79_get_sys_clk_rate(const char *id);
void ath79_ddr_ctrl_init(void);
-void ath79_ddr_wb_flush(unsigned int reg);
void ath79_gpio_init(void);
diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c
index eeb3953ed8ac..511c06560dc1 100644
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -26,9 +26,13 @@
#include "common.h"
#include "machtypes.h"
+static void __init ath79_misc_intc_domain_init(
+ struct device_node *node, int irq);
+
static void ath79_misc_irq_handler(struct irq_desc *desc)
{
- void __iomem *base = ath79_reset_base;
+ struct irq_domain *domain = irq_desc_get_handler_data(desc);
+ void __iomem *base = domain->host_data;
u32 pending;
pending = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS) &
@@ -42,15 +46,15 @@ static void ath79_misc_irq_handler(struct irq_desc *desc)
while (pending) {
int bit = __ffs(pending);
- generic_handle_irq(ATH79_MISC_IRQ(bit));
+ generic_handle_irq(irq_linear_revmap(domain, bit));
pending &= ~BIT(bit);
}
}
static void ar71xx_misc_irq_unmask(struct irq_data *d)
{
- unsigned int irq = d->irq - ATH79_MISC_IRQ_BASE;
- void __iomem *base = ath79_reset_base;
+ void __iomem *base = irq_data_get_irq_chip_data(d);
+ unsigned int irq = d->hwirq;
u32 t;
t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
@@ -62,8 +66,8 @@ static void ar71xx_misc_irq_unmask(struct irq_data *d)
static void ar71xx_misc_irq_mask(struct irq_data *d)
{
- unsigned int irq = d->irq - ATH79_MISC_IRQ_BASE;
- void __iomem *base = ath79_reset_base;
+ void __iomem *base = irq_data_get_irq_chip_data(d);
+ unsigned int irq = d->hwirq;
u32 t;
t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
@@ -75,8 +79,8 @@ static void ar71xx_misc_irq_mask(struct irq_data *d)
static void ar724x_misc_irq_ack(struct irq_data *d)
{
- unsigned int irq = d->irq - ATH79_MISC_IRQ_BASE;
- void __iomem *base = ath79_reset_base;
+ void __iomem *base = irq_data_get_irq_chip_data(d);
+ unsigned int irq = d->hwirq;
u32 t;
t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS);
@@ -94,12 +98,6 @@ static struct irq_chip ath79_misc_irq_chip = {
static void __init ath79_misc_irq_init(void)
{
- void __iomem *base = ath79_reset_base;
- int i;
-
- __raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
- __raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
-
if (soc_is_ar71xx() || soc_is_ar913x())
ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
else if (soc_is_ar724x() ||
@@ -110,13 +108,7 @@ static void __init ath79_misc_irq_init(void)
else
BUG();
- for (i = ATH79_MISC_IRQ_BASE;
- i < ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT; i++) {
- irq_set_chip_and_handler(i, &ath79_misc_irq_chip,
- handle_level_irq);
- }
-
- irq_set_chained_handler(ATH79_CPU_IRQ(6), ath79_misc_irq_handler);
+ ath79_misc_intc_domain_init(NULL, ATH79_CPU_IRQ(6));
}
static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
@@ -256,10 +248,10 @@ asmlinkage void plat_irq_dispatch(void)
}
}
-#ifdef CONFIG_IRQCHIP
static int misc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
{
irq_set_chip_and_handler(irq, &ath79_misc_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, d->host_data);
return 0;
}
@@ -268,19 +260,14 @@ static const struct irq_domain_ops misc_irq_domain_ops = {
.map = misc_map,
};
-static int __init ath79_misc_intc_of_init(
- struct device_node *node, struct device_node *parent)
+static void __init ath79_misc_intc_domain_init(
+ struct device_node *node, int irq)
{
void __iomem *base = ath79_reset_base;
struct irq_domain *domain;
- int irq;
-
- irq = irq_of_parse_and_map(node, 0);
- if (!irq)
- panic("Failed to get MISC IRQ");
domain = irq_domain_add_legacy(node, ATH79_MISC_IRQ_COUNT,
- ATH79_MISC_IRQ_BASE, 0, &misc_irq_domain_ops, NULL);
+ ATH79_MISC_IRQ_BASE, 0, &misc_irq_domain_ops, base);
if (!domain)
panic("Failed to add MISC irqdomain");
@@ -288,9 +275,19 @@ static int __init ath79_misc_intc_of_init(
__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
+ irq_set_chained_handler_and_data(irq, ath79_misc_irq_handler, domain);
+}
- irq_set_chained_handler(irq, ath79_misc_irq_handler);
+static int __init ath79_misc_intc_of_init(
+ struct device_node *node, struct device_node *parent)
+{
+ int irq;
+ irq = irq_of_parse_and_map(node, 0);
+ if (!irq)
+ panic("Failed to get MISC IRQ");
+
+ ath79_misc_intc_domain_init(node, irq);
return 0;
}
@@ -349,8 +346,6 @@ static int __init ar79_cpu_intc_of_init(
IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
ar79_cpu_intc_of_init);
-#endif
-
void __init arch_init_irq(void)
{
if (mips_machtype == ATH79_MACH_GENERIC_OF) {
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 8755d618e116..be451ee4a5ea 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -36,10 +36,6 @@
#define ATH79_SYS_TYPE_LEN 64
-#define AR71XX_BASE_FREQ 40000000
-#define AR724X_BASE_FREQ 5000000
-#define AR913X_BASE_FREQ 5000000
-
static char ath79_sys_type[ATH79_SYS_TYPE_LEN];
static void ath79_restart(char *command)
@@ -272,15 +268,10 @@ void __init device_tree_init(void)
unflatten_and_copy_device_tree();
}
-static void __init ath79_generic_init(void)
-{
- /* Nothing to do */
-}
-
MIPS_MACHINE(ATH79_MACH_GENERIC,
"Generic",
"Generic AR71XX/AR724X/AR913X based board",
- ath79_generic_init);
+ NULL);
MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
"DTB",
diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c
index a7e569c7968e..959c145a0a2c 100644
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -666,9 +666,15 @@ static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
switch (bus->hosttype) {
case BCMA_HOSTTYPE_PCI:
memset(out, 0, sizeof(struct ssb_sprom));
- snprintf(buf, sizeof(buf), "pci/%u/%u/",
- bus->host_pci->bus->number + 1,
- PCI_SLOT(bus->host_pci->devfn));
+ /* On BCM47XX all PCI buses share the same domain */
+ if (config_enabled(CONFIG_BCM47XX))
+ snprintf(buf, sizeof(buf), "pci/%u/%u/",
+ bus->host_pci->bus->number + 1,
+ PCI_SLOT(bus->host_pci->devfn));
+ else
+ snprintf(buf, sizeof(buf), "pci/%u/%u/",
+ pci_domain_nr(bus->host_pci->bus) + 1,
+ bus->host_pci->bus->number);
bcm47xx_sprom_apply_prefix_alias(buf, sizeof(buf));
prefix = buf;
break;
diff --git a/arch/mips/bcm63xx/nvram.c b/arch/mips/bcm63xx/nvram.c
index 4b50d40f7451..5f2bc1e10eae 100644
--- a/arch/mips/bcm63xx/nvram.c
+++ b/arch/mips/bcm63xx/nvram.c
@@ -10,6 +10,7 @@
#define pr_fmt(fmt) "bcm63xx_nvram: " fmt
+#include <linux/bcm963xx_nvram.h>
#include <linux/init.h>
#include <linux/crc32.h>
#include <linux/export.h>
@@ -18,51 +19,19 @@
#include <bcm63xx_nvram.h>
-/*
- * nvram structure
- */
-struct bcm963xx_nvram {
- u32 version;
- u8 reserved1[256];
- u8 name[16];
- u32 main_tp_number;
- u32 psi_size;
- u32 mac_addr_count;
- u8 mac_addr_base[ETH_ALEN];
- u8 reserved2[2];
- u32 checksum_old;
- u8 reserved3[720];
- u32 checksum_high;
-};
-
-#define BCM63XX_DEFAULT_PSI_SIZE 64
-
static struct bcm963xx_nvram nvram;
static int mac_addr_used;
void __init bcm63xx_nvram_init(void *addr)
{
- unsigned int check_len;
u32 crc, expected_crc;
u8 hcs_mac_addr[ETH_ALEN] = { 0x00, 0x10, 0x18, 0xff, 0xff, 0xff };
/* extract nvram data */
- memcpy(&nvram, addr, sizeof(nvram));
+ memcpy(&nvram, addr, BCM963XX_NVRAM_V5_SIZE);
/* check checksum before using data */
- if (nvram.version <= 4) {
- check_len = offsetof(struct bcm963xx_nvram, reserved3);
- expected_crc = nvram.checksum_old;
- nvram.checksum_old = 0;
- } else {
- check_len = sizeof(nvram);
- expected_crc = nvram.checksum_high;
- nvram.checksum_high = 0;
- }
-
- crc = crc32_le(~0, (u8 *)&nvram, check_len);
-
- if (crc != expected_crc)
+ if (bcm963xx_nvram_checksum(&nvram, &expected_crc, &crc))
pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
expected_crc, crc);
@@ -116,12 +85,3 @@ int bcm63xx_nvram_get_mac_address(u8 *mac)
return 0;
}
EXPORT_SYMBOL(bcm63xx_nvram_get_mac_address);
-
-int bcm63xx_nvram_get_psi_size(void)
-{
- if (nvram.psi_size > 0)
- return nvram.psi_size;
-
- return BCM63XX_DEFAULT_PSI_SIZE;
-}
-EXPORT_SYMBOL(bcm63xx_nvram_get_psi_size);
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index 5b16d2955fbb..35535284b39e 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -105,6 +105,7 @@ static const struct bmips_quirk bmips_quirk_list[] = {
{ "brcm,bcm33843-viper", &bcm3384_viper_quirks },
{ "brcm,bcm6328", &bcm6328_quirks },
{ "brcm,bcm6368", &bcm6368_quirks },
+ { "brcm,bcm63168", &bcm6368_quirks },
{ },
};
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index d5bdee115f22..4eff1ef02eff 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -29,20 +29,23 @@ KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
-targets := head.o decompress.o string.o dbg.o uart-16550.o uart-alchemy.o
-
# decompressor objects (linked with vmlinuz)
vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o
ifdef CONFIG_DEBUG_ZBOOT
vmlinuzobjs-$(CONFIG_DEBUG_ZBOOT) += $(obj)/dbg.o
vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
+vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM) += $(obj)/uart-prom.o
vmlinuzobjs-$(CONFIG_MIPS_ALCHEMY) += $(obj)/uart-alchemy.o
endif
-ifdef CONFIG_KERNEL_XZ
-vmlinuzobjs-y += $(obj)/../../lib/ashldi3.o
-endif
+vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o
+
+$(obj)/ashldi3.o: KBUILD_CFLAGS += -I$(srctree)/arch/mips/lib
+$(obj)/ashldi3.c: $(srctree)/arch/mips/lib/ashldi3.c
+ $(call cmd,shipped)
+
+targets := $(notdir $(vmlinuzobjs-y))
targets += vmlinux.bin
OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
@@ -60,7 +63,7 @@ targets += vmlinux.bin.z
$(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE
$(call if_changed,$(tool_y))
-targets += piggy.o
+targets += piggy.o dummy.o
OBJCOPYFLAGS_piggy.o := --add-section=.image=$(obj)/vmlinux.bin.z \
--set-section-flags=.image=contents,alloc,load,readonly,data
$(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
diff --git a/arch/mips/boot/compressed/uart-prom.c b/arch/mips/boot/compressed/uart-prom.c
new file mode 100644
index 000000000000..1c3d51bc90bb
--- /dev/null
+++ b/arch/mips/boot/compressed/uart-prom.c
@@ -0,0 +1,7 @@
+
+extern void prom_putchar(unsigned char ch);
+
+void putc(char c)
+{
+ prom_putchar(c);
+}
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index a0bf516ec394..fc7a0a98e9bf 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -4,6 +4,7 @@ dts-dirs += ingenic
dts-dirs += lantiq
dts-dirs += mti
dts-dirs += netlogic
+dts-dirs += pic32
dts-dirs += qca
dts-dirs += ralink
dts-dirs += xilfpga
diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi
index d52ce3d07f16..459b9b252c3b 100644
--- a/arch/mips/boot/dts/brcm/bcm6328.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi
@@ -31,6 +31,7 @@
};
aliases {
+ leds0 = &leds0;
uart0 = &uart0;
};
@@ -81,5 +82,13 @@
offset = <0x28>;
mask = <0x1>;
};
+
+ leds0: led-controller@10000800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-leds";
+ reg = <0x10000800 0x24>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi
index 45152bc22117..9c8d3fe28b31 100644
--- a/arch/mips/boot/dts/brcm/bcm6368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -32,6 +32,7 @@
};
aliases {
+ leds0 = &leds0;
uart0 = &uart0;
};
@@ -50,6 +51,19 @@
compatible = "simple-bus";
ranges;
+ periph_cntl: syscon@10000000 {
+ compatible = "syscon";
+ reg = <0x10000000 0x14>;
+ little-endian;
+ };
+
+ reboot: syscon-reboot@10000008 {
+ compatible = "syscon-reboot";
+ regmap = <&periph_cntl>;
+ offset = <0x8>;
+ mask = <0x1>;
+ };
+
periph_intc: periph_intc@10000020 {
compatible = "brcm,bcm3380-l2-intc";
reg = <0x10000024 0x4 0x1000002c 0x4>,
@@ -62,6 +76,14 @@
interrupts = <2>;
};
+ leds0: led-controller@100000d0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6358-leds";
+ reg = <0x100000d0 0x8>;
+ status = "disabled";
+ };
+
uart0: serial@10000100 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000100 0x18>;
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 9fcb9e7d1f57..1652d8d60b1e 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -42,3 +42,67 @@
&uart4 {
status = "okay";
};
+
+&nemc {
+ status = "okay";
+
+ nandc: nand-controller@1 {
+ compatible = "ingenic,jz4780-nand";
+ reg = <1 0 0x1000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ingenic,bch-controller = <&bch>;
+
+ ingenic,nemc-tAS = <10>;
+ ingenic,nemc-tAH = <5>;
+ ingenic,nemc-tBP = <10>;
+ ingenic,nemc-tAW = <15>;
+ ingenic,nemc-tSTRV = <100>;
+
+ nand@1 {
+ reg = <1>;
+
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <24>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x0 0x0 0x800000>;
+ };
+
+ partition@0x800000 {
+ label = "u-boot";
+ reg = <0x0 0x800000 0x0 0x200000>;
+ };
+
+ partition@0xa00000 {
+ label = "u-boot-env";
+ reg = <0x0 0xa00000 0x0 0x200000>;
+ };
+
+ partition@0xc00000 {
+ label = "boot";
+ reg = <0x0 0xc00000 0x0 0x4000000>;
+ };
+
+ partition@0x8c00000 {
+ label = "system";
+ reg = <0x0 0x4c00000 0x1 0xfb400000>;
+ };
+ };
+ };
+ };
+};
+
+&bch {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index 65389f602733..b868b429add2 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -108,4 +108,30 @@
status = "disabled";
};
+
+ nemc: nemc@13410000 {
+ compatible = "ingenic,jz4780-nemc";
+ reg = <0x13410000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0x1b000000 0x1000000
+ 2 0 0x1a000000 0x1000000
+ 3 0 0x19000000 0x1000000
+ 4 0 0x18000000 0x1000000
+ 5 0 0x17000000 0x1000000
+ 6 0 0x16000000 0x1000000>;
+
+ clocks = <&cgu JZ4780_CLK_NEMC>;
+
+ status = "disabled";
+ };
+
+ bch: bch@134d0000 {
+ compatible = "ingenic,jz4780-bch";
+ reg = <0x134d0000 0x10000>;
+
+ clocks = <&cgu JZ4780_CLK_BCH>;
+
+ status = "disabled";
+ };
};
diff --git a/arch/mips/boot/dts/pic32/Makefile b/arch/mips/boot/dts/pic32/Makefile
new file mode 100644
index 000000000000..7ac790551ec9
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/Makefile
@@ -0,0 +1,12 @@
+dtb-$(CONFIG_DTB_PIC32_MZDA_SK) += pic32mzda_sk.dtb
+
+dtb-$(CONFIG_DTB_PIC32_NONE) += \
+ pic32mzda_sk.dtb
+
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi b/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi
new file mode 100644
index 000000000000..ef1335012f43
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi
@@ -0,0 +1,236 @@
+/*
+ * Device Tree Source for PIC32MZDA clock data
+ *
+ * Purna Chandra Mandal <purna.mandal@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/* all fixed rate clocks */
+
+/ {
+ POSC:posc_clk { /* On-chip primary oscillator */
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ FRC:frc_clk { /* internal FRC oscillator */
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <8000000>;
+ };
+
+ BFRC:bfrc_clk { /* internal backup FRC oscillator */
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <8000000>;
+ };
+
+ LPRC:lprc_clk { /* internal low-power FRC oscillator */
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ /* UPLL provides clock to USBCORE */
+ UPLL:usb_phy_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "usbphy_clk";
+ };
+
+ TxCKI:txcki_clk { /* external clock input on TxCLKI pin */
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ status = "disabled";
+ };
+
+ /* external clock input on REFCLKIx pin */
+ REFIx:refix_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ status = "disabled";
+ };
+
+ /* PIC32 specific clks */
+ pic32_clktree {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x1f801200 0x200>;
+ compatible = "microchip,pic32mzda-clk";
+ ranges = <0 0x1f801200 0x200>;
+
+ /* secondary oscillator; external input on SOSCI pin */
+ SOSC:sosc_clk@0 {
+ #clock-cells = <0>;
+ compatible = "microchip,pic32mzda-sosc";
+ clock-frequency = <32768>;
+ reg = <0x000 0x10>, /* enable reg */
+ <0x1d0 0x10>; /* status reg */
+ microchip,bit-mask = <0x02>; /* enable mask */
+ microchip,status-bit-mask = <0x10>; /* status-mask*/
+ };
+
+ FRCDIV:frcdiv_clk {
+ #clock-cells = <0>;
+ compatible = "microchip,pic32mzda-frcdivclk";
+ clocks = <&FRC>;
+ clock-output-names = "frcdiv_clk";
+ };
+
+ /* System PLL clock */
+ SYSPLL:spll_clk@020 {
+ #clock-cells = <0>;
+ compatible = "microchip,pic32mzda-syspll";
+ reg = <0x020 0x10>, /* SPLL register */
+ <0x1d0 0x10>; /* CLKSTAT register */
+ clocks = <&POSC>, <&FRC>;
+ clock-output-names = "sys_pll";
+ microchip,status-bit-mask = <0x80>; /* SPLLRDY */
+ };
+
+ /* system clock; mux with postdiv & slew */
+ SYSCLK:sys_clk@1c0 {
+ #clock-cells = <0>;
+ compatible = "microchip,pic32mzda-sysclk-v2";
+ reg = <0x1c0 0x04>; /* SLEWCON */
+ clocks = <&FRCDIV>, <&SYSPLL>, <&POSC>, <&SOSC>,
+ <&LPRC>, <&FRCDIV>;
+ microchip,clock-indices = <0>, <1>, <2>, <4>,
+ <5>, <7>;
+ clock-output-names = "sys_clk";
+ };
+
+ /* Peripheral bus1 clock */
+ PBCLK1:pb1_clk@140 {
+ reg = <0x140 0x10>;
+ #clock-cells = <0>;
+ compatible = "microchip,pic32mzda-pbclk";
+ clocks = <&SYSCLK>;
+ clock-output-names = "pb1_clk";
+ /* used by system modules, not gateable */
+ microchip,ignore-unused;
+ };
+
+ /* Peripheral bus2 clock */
+ PBCLK2:pb2_clk@150 {
+ reg = <0x150 0x10>;
+ #clock-cells = <0>;
+ compatible = "microchip,pic32mzda-pbclk";
+ clocks = <&SYSCLK>;
+ clock-output-names = "pb2_clk";
+ /* avoid gating even if unused */
+ microchip,ignore-unused;
+ };
+
+ /* Peripheral bus3 clock */
+ PBCLK3:pb3_clk@160 {
+ reg = <0x160 0x10>;
+ #clock-cells = <0>;
+ compatible = "microchip,pic32mzda-pbclk";
+ clocks = <&SYSCLK>;
+ clock-output-names = "pb3_clk";
+ };
+
+ /* Peripheral bus4 clock(I/O ports, GPIO) */
+ PBCLK4:pb4_clk@170 {
+ reg = <0x170 0x10>;
+ #clock-cells = <0>;
+ compatible = "microchip,pic32mzda-pbclk";
+ clocks = <&SYSCLK>;
+ clock-output-names = "pb4_clk";
+ };
+
+ /* Peripheral bus clock */
+ PBCLK5:pb5_clk@180 {
+ reg = <0x180 0x10>;
+ #clock-cells = <0>;
+ compatible = "microchip,pic32mzda-pbclk";
+ clocks = <&SYSCLK>;
+ clock-output-names = "pb5_clk";
+ };
+
+ /* Peripheral Bus6 clock; */
+ PBCLK6:pb6_clk@190 {
+ reg = <0x190 0x10>;
+ compatible = "microchip,pic32mzda-pbclk";
+ clocks = <&SYSCLK>;
+ #clock-cells = <0>;
+ };
+
+ /* Peripheral bus7 clock */
+ PBCLK7:pb7_clk@1a0 {
+ reg = <0x1a0 0x10>;
+ #clock-cells = <0>;
+ compatible = "microchip,pic32mzda-pbclk";
+ /* CPU is driven by this clock; so named */
+ clock-output-names = "cpu_clk";
+ clocks = <&SYSCLK>;
+ };
+
+ /* Reference Oscillator clock for SPI/I2S */
+ REFCLKO1:refo1_clk@80 {
+ reg = <0x080 0x20>;
+ #clock-cells = <0>;
+ compatible = "microchip,pic32mzda-refoclk";
+ clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
+ <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
+ microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
+ <5>, <7>, <8>, <9>;
+ clock-output-names = "refo1_clk";
+ };
+
+ /* Reference Oscillator clock for SQI */
+ REFCLKO2:refo2_clk@a0 {
+ reg = <0x0a0 0x20>;
+ #clock-cells = <0>;
+ compatible = "microchip,pic32mzda-refoclk";
+ clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
+ <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
+ microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
+ <5>, <7>, <8>, <9>;
+ clock-output-names = "refo2_clk";
+ };
+
+ /* Reference Oscillator clock, ADC */
+ REFCLKO3:refo3_clk@c0 {
+ reg = <0x0c0 0x20>;
+ compatible = "microchip,pic32mzda-refoclk";
+ clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
+ <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
+ microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
+ <5>, <7>, <8>, <9>;
+ #clock-cells = <0>;
+ clock-output-names = "refo3_clk";
+ };
+
+ /* Reference Oscillator clock */
+ REFCLKO4:refo4_clk@e0 {
+ reg = <0x0e0 0x20>;
+ compatible = "microchip,pic32mzda-refoclk";
+ clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
+ <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
+ microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
+ <5>, <7>, <8>, <9>;
+ #clock-cells = <0>;
+ clock-output-names = "refo4_clk";
+ };
+
+ /* Reference Oscillator clock, LCD */
+ REFCLKO5:refo5_clk@100 {
+ reg = <0x100 0x20>;
+ compatible = "microchip,pic32mzda-refoclk";
+ clocks = <&SYSCLK>,<&PBCLK1>,<&POSC>,<&FRC>,<&LPRC>,
+ <&SOSC>,<&SYSPLL>,<&REFIx>,<&BFRC>;
+ microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
+ <5>, <7>, <8>, <9>;
+ #clock-cells = <0>;
+ clock-output-names = "refo5_clk";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/pic32/pic32mzda.dtsi b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
new file mode 100644
index 000000000000..ad9e3318c2ce
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
@@ -0,0 +1,281 @@
+/*
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "pic32mzda-clk.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&evic>;
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ gpio5 = &gpio5;
+ gpio6 = &gpio6;
+ gpio7 = &gpio7;
+ gpio8 = &gpio8;
+ gpio9 = &gpio9;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mti,mips14KEc";
+ device_type = "cpu";
+ };
+ };
+
+ soc {
+ compatible = "microchip,pic32mzda-infra";
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ evic: interrupt-controller@1f810000 {
+ compatible = "microchip,pic32mzda-evic";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1f810000 0x1000>;
+ microchip,external-irqs = <3 8 13 18 23>;
+ };
+
+ pic32_pinctrl: pinctrl@1f801400{
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "microchip,pic32mzda-pinctrl";
+ reg = <0x1f801400 0x400>;
+ clocks = <&PBCLK1>;
+ };
+
+ /* PORTA */
+ gpio0: gpio0@1f860000 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860000 0x100>;
+ interrupts = <118 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&PBCLK4>;
+ microchip,gpio-bank = <0>;
+ gpio-ranges = <&pic32_pinctrl 0 0 16>;
+ };
+
+ /* PORTB */
+ gpio1: gpio1@1f860100 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860100 0x100>;
+ interrupts = <119 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&PBCLK4>;
+ microchip,gpio-bank = <1>;
+ gpio-ranges = <&pic32_pinctrl 0 16 16>;
+ };
+
+ /* PORTC */
+ gpio2: gpio2@1f860200 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860200 0x100>;
+ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&PBCLK4>;
+ microchip,gpio-bank = <2>;
+ gpio-ranges = <&pic32_pinctrl 0 32 16>;
+ };
+
+ /* PORTD */
+ gpio3: gpio3@1f860300 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860300 0x100>;
+ interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&PBCLK4>;
+ microchip,gpio-bank = <3>;
+ gpio-ranges = <&pic32_pinctrl 0 48 16>;
+ };
+
+ /* PORTE */
+ gpio4: gpio4@1f860400 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860400 0x100>;
+ interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&PBCLK4>;
+ microchip,gpio-bank = <4>;
+ gpio-ranges = <&pic32_pinctrl 0 64 16>;
+ };
+
+ /* PORTF */
+ gpio5: gpio5@1f860500 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860500 0x100>;
+ interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&PBCLK4>;
+ microchip,gpio-bank = <5>;
+ gpio-ranges = <&pic32_pinctrl 0 80 16>;
+ };
+
+ /* PORTG */
+ gpio6: gpio6@1f860600 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860600 0x100>;
+ interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&PBCLK4>;
+ microchip,gpio-bank = <6>;
+ gpio-ranges = <&pic32_pinctrl 0 96 16>;
+ };
+
+ /* PORTH */
+ gpio7: gpio7@1f860700 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860700 0x100>;
+ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&PBCLK4>;
+ microchip,gpio-bank = <7>;
+ gpio-ranges = <&pic32_pinctrl 0 112 16>;
+ };
+
+ /* PORTI does not exist */
+
+ /* PORTJ */
+ gpio8: gpio8@1f860800 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860800 0x100>;
+ interrupts = <126 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&PBCLK4>;
+ microchip,gpio-bank = <8>;
+ gpio-ranges = <&pic32_pinctrl 0 128 16>;
+ };
+
+ /* PORTK */
+ gpio9: gpio9@1f860900 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860900 0x100>;
+ interrupts = <127 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&PBCLK4>;
+ microchip,gpio-bank = <9>;
+ gpio-ranges = <&pic32_pinctrl 0 144 16>;
+ };
+
+ sdhci: sdhci@1f8ec000 {
+ compatible = "microchip,pic32mzda-sdhci";
+ reg = <0x1f8ec000 0x100>;
+ interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&REFCLKO4>, <&PBCLK5>;
+ clock-names = "base_clk", "sys_clk";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ uart1: serial@1f822000 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822000 0x50>;
+ interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
+ <113 IRQ_TYPE_LEVEL_HIGH>,
+ <114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&PBCLK2>;
+ status = "disabled";
+ };
+
+ uart2: serial@1f822200 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822200 0x50>;
+ interrupts = <145 IRQ_TYPE_LEVEL_HIGH>,
+ <146 IRQ_TYPE_LEVEL_HIGH>,
+ <147 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&PBCLK2>;
+ status = "disabled";
+ };
+
+ uart3: serial@1f822400 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822400 0x50>;
+ interrupts = <157 IRQ_TYPE_LEVEL_HIGH>,
+ <158 IRQ_TYPE_LEVEL_HIGH>,
+ <159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&PBCLK2>;
+ status = "disabled";
+ };
+
+ uart4: serial@1f822600 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822600 0x50>;
+ interrupts = <170 IRQ_TYPE_LEVEL_HIGH>,
+ <171 IRQ_TYPE_LEVEL_HIGH>,
+ <172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&PBCLK2>;
+ status = "disabled";
+ };
+
+ uart5: serial@1f822800 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822800 0x50>;
+ interrupts = <179 IRQ_TYPE_LEVEL_HIGH>,
+ <180 IRQ_TYPE_LEVEL_HIGH>,
+ <181 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&PBCLK2>;
+ status = "disabled";
+ };
+
+ uart6: serial@1f822A00 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822A00 0x50>;
+ interrupts = <188 IRQ_TYPE_LEVEL_HIGH>,
+ <189 IRQ_TYPE_LEVEL_HIGH>,
+ <190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&PBCLK2>;
+ status = "disabled";
+ };
+};
diff --git a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
new file mode 100644
index 000000000000..5d434a50e85b
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "pic32mzda.dtsi"
+
+/ {
+ compatible = "microchip,pic32mzda-sk", "microchip,pic32mzda";
+ model = "Microchip PIC32MZDA Starter Kit";
+
+ memory {
+ device_type = "memory";
+ reg = <0x08000000 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "earlyprintk=ttyPIC1,115200n8r console=ttyPIC1,115200n8";
+ };
+
+ leds0 {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ led@1 {
+ label = "pic32mzda_sk:red:led1";
+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led@2 {
+ label = "pic32mzda_sk:yellow:led2";
+ gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+
+ led@3 {
+ label = "pic32mzda_sk:green:led3";
+ gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ keys0 {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&user_buttons_s0>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@sw1 {
+ label = "ESC";
+ linux,code = <1>;
+ gpios = <&gpio1 12 0>;
+ };
+
+ button@sw2 {
+ label = "Home";
+ linux,code = <102>;
+ gpios = <&gpio1 13 0>;
+ };
+
+ button@sw3 {
+ label = "Menu";
+ linux,code = <139>;
+ gpios = <&gpio1 14 0>;
+ };
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&sdhci {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhc1>;
+ status = "okay";
+ assigned-clocks = <&REFCLKO2>,<&REFCLKO4>,<&REFCLKO5>;
+ assigned-clock-rates = <50000000>,<25000000>,<40000000>;
+};
+
+&pic32_pinctrl {
+
+ pinctrl_sdhc1: sdhc1_pins0 {
+ pins = "A6", "D4", "G13", "G12", "G14", "A7", "A0";
+ microchip,digital;
+ };
+
+ user_leds_s0: user_leds_s0 {
+ pins = "H0", "H1", "H2";
+ output-low;
+ microchip,digital;
+ };
+
+ user_buttons_s0: user_buttons_s0 {
+ pins = "B12", "B13", "B14";
+ microchip,digital;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pinctrl_uart2: pinctrl_uart2 {
+ uart2-tx {
+ pins = "G9";
+ function = "U2TX";
+ microchip,digital;
+ output-high;
+ };
+ uart2-rx {
+ pins = "B0";
+ function = "U2RX";
+ microchip,digital;
+ input-enable;
+ };
+ };
+
+ pinctrl_uart4: uart4-0 {
+ uart4-tx {
+ pins = "C3";
+ function = "U4TX";
+ microchip,digital;
+ output-high;
+ };
+ uart4-rx {
+ pins = "E8";
+ function = "U4RX";
+ microchip,digital;
+ input-enable;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index 13d0439496a9..3ad4ba9b12fd 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -125,6 +125,21 @@
};
};
+ usb@1b000100 {
+ compatible = "qca,ar7100-ehci", "generic-ehci";
+ reg = <0x1b000100 0x100>;
+
+ interrupts = <3>;
+ resets = <&rst 5>;
+
+ has-transaction-translator;
+
+ phy-names = "usb";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+
spi@1f000000 {
compatible = "qca,ar9132-spi", "qca,ar7100-spi";
reg = <0x1f000000 0x10>;
@@ -138,4 +153,15 @@
#size-cells = <0>;
};
};
+
+ usb_phy: usb-phy {
+ compatible = "qca,ar7100-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
};
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
index 003015ab34e7..e535ee3c26a4 100644
--- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -35,6 +35,10 @@
};
};
+ usb@1b000100 {
+ status = "okay";
+ };
+
spi@1f000000 {
status = "okay";
num-cs = <1>;
@@ -65,6 +69,10 @@
};
};
+ usb-phy {
+ status = "okay";
+ };
+
gpio-keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
diff --git a/arch/mips/configs/pic32mzda_defconfig b/arch/mips/configs/pic32mzda_defconfig
new file mode 100644
index 000000000000..52192c632ae8
--- /dev/null
+++ b/arch/mips/configs/pic32mzda_defconfig
@@ -0,0 +1,89 @@
+CONFIG_MACH_PIC32=y
+CONFIG_DTB_PIC32_MZDA_SK=y
+CONFIG_HZ_100=y
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_SECCOMP is not set
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_RELAY=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SGI_PARTITION=y
+CONFIG_BINFMT_MISC=m
+# CONFIG_SUSPEND is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SCAN_ASYNC=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_INPUT_LEDS=m
+CONFIG_INPUT_POLLDEV=y
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_PIC32=y
+CONFIG_SERIAL_PIC32_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_RAW_DRIVER=m
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_MICROCHIP_PIC32=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_ONESHOT=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_FSCACHE=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZ4=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
index 06b9bc7ea14b..c3212ff26723 100644
--- a/arch/mips/include/asm/cacheops.h
+++ b/arch/mips/include/asm/cacheops.h
@@ -12,54 +12,76 @@
#define __ASM_CACHEOPS_H
/*
+ * Most cache ops are split into a 2 bit field identifying the cache, and a 3
+ * bit field identifying the cache operation.
+ */
+#define CacheOp_Cache 0x03
+#define CacheOp_Op 0x1c
+
+#define Cache_I 0x00
+#define Cache_D 0x01
+#define Cache_T 0x02
+#define Cache_S 0x03
+
+#define Index_Writeback_Inv 0x00
+#define Index_Load_Tag 0x04
+#define Index_Store_Tag 0x08
+#define Hit_Invalidate 0x10
+#define Hit_Writeback_Inv 0x14 /* not with Cache_I though */
+#define Hit_Writeback 0x18
+
+/*
* Cache Operations available on all MIPS processors with R4000-style caches
*/
-#define Index_Invalidate_I 0x00
-#define Index_Writeback_Inv_D 0x01
-#define Index_Load_Tag_I 0x04
-#define Index_Load_Tag_D 0x05
-#define Index_Store_Tag_I 0x08
-#define Index_Store_Tag_D 0x09
-#define Hit_Invalidate_I 0x10
-#define Hit_Invalidate_D 0x11
-#define Hit_Writeback_Inv_D 0x15
+#define Index_Invalidate_I (Cache_I | Index_Writeback_Inv)
+#define Index_Writeback_Inv_D (Cache_D | Index_Writeback_Inv)
+#define Index_Load_Tag_I (Cache_I | Index_Load_Tag)
+#define Index_Load_Tag_D (Cache_D | Index_Load_Tag)
+#define Index_Store_Tag_I (Cache_I | Index_Store_Tag)
+#define Index_Store_Tag_D (Cache_D | Index_Store_Tag)
+#define Hit_Invalidate_I (Cache_I | Hit_Invalidate)
+#define Hit_Invalidate_D (Cache_D | Hit_Invalidate)
+#define Hit_Writeback_Inv_D (Cache_D | Hit_Writeback_Inv)
/*
* R4000-specific cacheops
*/
-#define Create_Dirty_Excl_D 0x0d
-#define Fill 0x14
-#define Hit_Writeback_I 0x18
-#define Hit_Writeback_D 0x19
+#define Create_Dirty_Excl_D (Cache_D | 0x0c)
+#define Fill (Cache_I | 0x14)
+#define Hit_Writeback_I (Cache_I | Hit_Writeback)
+#define Hit_Writeback_D (Cache_D | Hit_Writeback)
/*
* R4000SC and R4400SC-specific cacheops
*/
-#define Index_Invalidate_SI 0x02
-#define Index_Writeback_Inv_SD 0x03
-#define Index_Load_Tag_SI 0x06
-#define Index_Load_Tag_SD 0x07
-#define Index_Store_Tag_SI 0x0A
-#define Index_Store_Tag_SD 0x0B
-#define Create_Dirty_Excl_SD 0x0f
-#define Hit_Invalidate_SI 0x12
-#define Hit_Invalidate_SD 0x13
-#define Hit_Writeback_Inv_SD 0x17
-#define Hit_Writeback_SD 0x1b
-#define Hit_Set_Virtual_SI 0x1e
-#define Hit_Set_Virtual_SD 0x1f
+#define Cache_SI 0x02
+#define Cache_SD 0x03
+
+#define Index_Invalidate_SI (Cache_SI | Index_Writeback_Inv)
+#define Index_Writeback_Inv_SD (Cache_SD | Index_Writeback_Inv)
+#define Index_Load_Tag_SI (Cache_SI | Index_Load_Tag)
+#define Index_Load_Tag_SD (Cache_SD | Index_Load_Tag)
+#define Index_Store_Tag_SI (Cache_SI | Index_Store_Tag)
+#define Index_Store_Tag_SD (Cache_SD | Index_Store_Tag)
+#define Create_Dirty_Excl_SD (Cache_SD | 0x0c)
+#define Hit_Invalidate_SI (Cache_SI | Hit_Invalidate)
+#define Hit_Invalidate_SD (Cache_SD | Hit_Invalidate)
+#define Hit_Writeback_Inv_SD (Cache_SD | Hit_Writeback_Inv)
+#define Hit_Writeback_SD (Cache_SD | Hit_Writeback)
+#define Hit_Set_Virtual_SI (Cache_SI | 0x1c)
+#define Hit_Set_Virtual_SD (Cache_SD | 0x1c)
/*
* R5000-specific cacheops
*/
-#define R5K_Page_Invalidate_S 0x17
+#define R5K_Page_Invalidate_S (Cache_S | 0x14)
/*
* RM7000-specific cacheops
*/
-#define Page_Invalidate_T 0x16
-#define Index_Store_Tag_T 0x0a
-#define Index_Load_Tag_T 0x06
+#define Page_Invalidate_T (Cache_T | 0x14)
+#define Index_Store_Tag_T (Cache_T | Index_Store_Tag)
+#define Index_Load_Tag_T (Cache_T | Index_Load_Tag)
/*
* R10000-specific cacheops
@@ -67,22 +89,22 @@
* Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
* Most of the _S cacheops are identical to the R4000SC _SD cacheops.
*/
-#define Index_Writeback_Inv_S 0x03
-#define Index_Load_Tag_S 0x07
-#define Index_Store_Tag_S 0x0B
-#define Hit_Invalidate_S 0x13
+#define Index_Writeback_Inv_S (Cache_S | Index_Writeback_Inv)
+#define Index_Load_Tag_S (Cache_S | Index_Load_Tag)
+#define Index_Store_Tag_S (Cache_S | Index_Store_Tag)
+#define Hit_Invalidate_S (Cache_S | Hit_Invalidate)
#define Cache_Barrier 0x14
-#define Hit_Writeback_Inv_S 0x17
-#define Index_Load_Data_I 0x18
-#define Index_Load_Data_D 0x19
-#define Index_Load_Data_S 0x1b
-#define Index_Store_Data_I 0x1c
-#define Index_Store_Data_D 0x1d
-#define Index_Store_Data_S 0x1f
+#define Hit_Writeback_Inv_S (Cache_S | Hit_Writeback_Inv)
+#define Index_Load_Data_I (Cache_I | 0x18)
+#define Index_Load_Data_D (Cache_D | 0x18)
+#define Index_Load_Data_S (Cache_S | 0x18)
+#define Index_Store_Data_I (Cache_I | 0x1c)
+#define Index_Store_Data_D (Cache_D | 0x1c)
+#define Index_Store_Data_S (Cache_S | 0x1c)
/*
* Loongson2-specific cacheops
*/
-#define Hit_Invalidate_I_Loongson2 0x00
+#define Hit_Invalidate_I_Loongson2 (Cache_I | 0x00)
#endif /* __ASM_CACHEOPS_H */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index d1e04c943f5f..eeec8c8e2da2 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -414,4 +414,11 @@
# define cpu_has_small_pages (cpu_data[0].options & MIPS_CPU_SP)
#endif
+#ifndef cpu_has_nan_legacy
+#define cpu_has_nan_legacy (cpu_data[0].options & MIPS_CPU_NAN_LEGACY)
+#endif
+#ifndef cpu_has_nan_2008
+#define cpu_has_nan_2008 (cpu_data[0].options & MIPS_CPU_NAN_2008)
+#endif
+
#endif /* __ASM_CPU_FEATURES_H */
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 82ad15f11049..a97ca97285ec 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -386,6 +386,8 @@ enum cpu_type_enum {
#define MIPS_CPU_BP_GHIST 0x8000000000ull /* R12K+ Branch Prediction Global History */
#define MIPS_CPU_SP 0x10000000000ull /* Small (1KB) page support */
#define MIPS_CPU_FTLB 0x20000000000ull /* CPU has Fixed-page-size TLB */
+#define MIPS_CPU_NAN_LEGACY 0x40000000000ull /* Legacy NaN implemented */
+#define MIPS_CPU_NAN_2008 0x80000000000ull /* 2008 NaN implemented */
/*
* CPU ASE encodings
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index b01a6ff468e0..cefb7a596878 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -12,7 +12,6 @@
#include <linux/fs.h>
#include <uapi/linux/elf.h>
-#include <asm/cpu-info.h>
#include <asm/current.h>
/* ELF header e_flags defines. */
@@ -44,6 +43,7 @@
#define EF_MIPS_OPTIONS_FIRST 0x00000080
#define EF_MIPS_32BITMODE 0x00000100
#define EF_MIPS_FP64 0x00000200
+#define EF_MIPS_NAN2008 0x00000400
#define EF_MIPS_ABI 0x0000f000
#define EF_MIPS_ARCH 0xf0000000
@@ -305,7 +305,7 @@ do { \
\
current->thread.abi = &mips_abi; \
\
- current->thread.fpu.fcr31 = boot_cpu_data.fpu_csr31; \
+ mips_set_personality_nan(state); \
} while (0)
#endif /* CONFIG_32BIT */
@@ -367,7 +367,7 @@ do { \
else \
current->thread.abi = &mips_abi; \
\
- current->thread.fpu.fcr31 = boot_cpu_data.fpu_csr31; \
+ mips_set_personality_nan(state); \
\
p = personality(current->personality); \
if (p != PER_LINUX32 && p != PER_LINUX) \
@@ -432,6 +432,7 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm,
int uses_interp);
struct arch_elf_state {
+ int nan_2008;
int fp_abi;
int interp_fp_abi;
int overall_fp_mode;
@@ -440,17 +441,23 @@ struct arch_elf_state {
#define MIPS_ABI_FP_UNKNOWN (-1) /* Unknown FP ABI (kernel internal) */
#define INIT_ARCH_ELF_STATE { \
+ .nan_2008 = -1, \
.fp_abi = MIPS_ABI_FP_UNKNOWN, \
.interp_fp_abi = MIPS_ABI_FP_UNKNOWN, \
.overall_fp_mode = -1, \
}
+/* Whether to accept legacy-NaN and 2008-NaN user binaries. */
+extern bool mips_use_nan_legacy;
+extern bool mips_use_nan_2008;
+
extern int arch_elf_pt_proc(void *ehdr, void *phdr, struct file *elf,
bool is_interp, struct arch_elf_state *state);
-extern int arch_check_elf(void *ehdr, bool has_interpreter,
+extern int arch_check_elf(void *ehdr, bool has_interpreter, void *interp_ehdr,
struct arch_elf_state *state);
+extern void mips_set_personality_nan(struct arch_elf_state *state);
extern void mips_set_personality_fp(struct arch_elf_state *state);
#endif /* _ASM_ELF_H */
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
index 2f021cdfba4f..3225c3c0724b 100644
--- a/arch/mips/include/asm/fpu_emulator.h
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -79,7 +79,7 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
/*
* Break instruction with special math emu break code set
*/
-#define BREAK_MATH (0x0000000d | (BRK_MEMU << 16))
+#define BREAK_MATH(micromips) (((micromips) ? 0x7 : 0xd) | (BRK_MEMU << 16))
#define SIGNALLING_NAN 0x7ff800007ff80000LL
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index d10fd80dbb7e..2b4dc7ad53b8 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -275,6 +275,7 @@ static inline void __iomem * __ioremap_mode(phys_addr_t offset, unsigned long si
*/
#define ioremap_cachable(offset, size) \
__ioremap_mode((offset), (size), _page_cachable_default)
+#define ioremap_cache ioremap_cachable
/*
* These two are MIPS specific ioremap variant. ioremap_cacheable_cow
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
index e7b138b4b3d3..65c351e328cc 100644
--- a/arch/mips/include/asm/irqflags.h
+++ b/arch/mips/include/asm/irqflags.h
@@ -84,41 +84,11 @@ static inline void arch_local_irq_restore(unsigned long flags)
: "memory");
}
-static inline void __arch_local_irq_restore(unsigned long flags)
-{
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " .set noat \n"
-#if defined(CONFIG_IRQ_MIPS_CPU)
- /*
- * Slow, but doesn't suffer from a relatively unlikely race
- * condition we're having since days 1.
- */
- " beqz %[flags], 1f \n"
- " di \n"
- " ei \n"
- "1: \n"
-#else
- /*
- * Fast, dangerous. Life is fun, life is good.
- */
- " mfc0 $1, $12 \n"
- " ins $1, %[flags], 0, 1 \n"
- " mtc0 $1, $12 \n"
-#endif
- " " __stringify(__irq_disable_hazard) " \n"
- " .set pop \n"
- : [flags] "=r" (flags)
- : "0" (flags)
- : "memory");
-}
#else
/* Functions that require preempt_{dis,en}able() are in mips-atomic.c */
void arch_local_irq_disable(void);
unsigned long arch_local_irq_save(void);
void arch_local_irq_restore(unsigned long flags);
-void __arch_local_irq_restore(unsigned long flags);
#endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
static inline void arch_local_irq_enable(void)
diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h
index 7c191443c7ea..f6b12790716c 100644
--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@@ -58,7 +58,7 @@
#define KVM_MAX_VCPUS 1
#define KVM_USER_MEM_SLOTS 8
/* memory slots that does not exposed to userspace */
-#define KVM_PRIVATE_MEM_SLOTS 0
+#define KVM_PRIVATE_MEM_SLOTS 0
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#define KVM_HALT_POLL_NS_DEFAULT 500000
@@ -92,14 +92,6 @@
#define KVM_INVALID_INST 0xdeadbeef
#define KVM_INVALID_ADDR 0xdeadbeef
-#define KVM_MALTA_GUEST_RTC_ADDR 0xb8000070UL
-
-#define GUEST_TICKS_PER_JIFFY (40000000/HZ)
-#define MS_TO_NS(x) (x * 1E6L)
-
-#define CAUSEB_DC 27
-#define CAUSEF_DC (_ULCAST_(1) << 27)
-
extern atomic_t kvm_mips_instance;
extern kvm_pfn_t (*kvm_mips_gfn_to_pfn)(struct kvm *kvm, gfn_t gfn);
extern void (*kvm_mips_release_pfn_clean)(kvm_pfn_t pfn);
@@ -289,34 +281,6 @@ enum mips_mmu_types {
MMU_TYPE_R8000
};
-/*
- * Trap codes
- */
-#define T_INT 0 /* Interrupt pending */
-#define T_TLB_MOD 1 /* TLB modified fault */
-#define T_TLB_LD_MISS 2 /* TLB miss on load or ifetch */
-#define T_TLB_ST_MISS 3 /* TLB miss on a store */
-#define T_ADDR_ERR_LD 4 /* Address error on a load or ifetch */
-#define T_ADDR_ERR_ST 5 /* Address error on a store */
-#define T_BUS_ERR_IFETCH 6 /* Bus error on an ifetch */
-#define T_BUS_ERR_LD_ST 7 /* Bus error on a load or store */
-#define T_SYSCALL 8 /* System call */
-#define T_BREAK 9 /* Breakpoint */
-#define T_RES_INST 10 /* Reserved instruction exception */
-#define T_COP_UNUSABLE 11 /* Coprocessor unusable */
-#define T_OVFLOW 12 /* Arithmetic overflow */
-
-/*
- * Trap definitions added for r4000 port.
- */
-#define T_TRAP 13 /* Trap instruction */
-#define T_VCEI 14 /* Virtual coherency exception */
-#define T_MSAFPE 14 /* MSA floating point exception */
-#define T_FPE 15 /* Floating point exception */
-#define T_MSADIS 21 /* MSA disabled exception */
-#define T_WATCH 23 /* Watch address reference */
-#define T_VCED 31 /* Virtual coherency data */
-
/* Resume Flags */
#define RESUME_FLAG_DR (1<<0) /* Reload guest nonvolatile state? */
#define RESUME_FLAG_HOST (1<<1) /* Resume host? */
@@ -686,7 +650,6 @@ extern void kvm_mips_dump_host_tlbs(void);
extern void kvm_mips_dump_guest_tlbs(struct kvm_vcpu *vcpu);
extern void kvm_mips_flush_host_tlb(int skip_kseg0);
extern int kvm_mips_host_tlb_inv(struct kvm_vcpu *vcpu, unsigned long entryhi);
-extern int kvm_mips_host_tlb_inv_index(struct kvm_vcpu *vcpu, int index);
extern int kvm_mips_guest_tlb_lookup(struct kvm_vcpu *vcpu,
unsigned long entryhi);
diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h
index 4eee221b0cf0..2b3487213d1e 100644
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -115,6 +115,7 @@ static inline int soc_is_qca955x(void)
return soc_is_qca9556() || soc_is_qca9558();
}
+void ath79_ddr_wb_flush(unsigned int reg);
void ath79_ddr_set_pci_windows(void);
extern void __iomem *ath79_pll_base;
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
index 348df49dcc9f..4e0b6bc1165e 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
@@ -30,6 +30,4 @@ u8 *bcm63xx_nvram_get_name(void);
*/
int bcm63xx_nvram_get_mac_address(u8 *mac);
-int bcm63xx_nvram_get_psi_size(void);
-
#endif /* BCM63XX_NVRAM_H */
diff --git a/arch/mips/include/asm/mach-pic32/cpu-feature-overrides.h b/arch/mips/include/asm/mach-pic32/cpu-feature-overrides.h
new file mode 100644
index 000000000000..468230834e2f
--- /dev/null
+++ b/arch/mips/include/asm/mach-pic32/cpu-feature-overrides.h
@@ -0,0 +1,32 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_MACH_PIC32_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_PIC32_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * CPU feature overrides for PIC32 boards
+ */
+#ifdef CONFIG_CPU_MIPS32
+#define cpu_has_vint 1
+#define cpu_has_veic 0
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4k_cache 1
+#define cpu_has_fpu 0
+#define cpu_has_counter 1
+#define cpu_has_llsc 1
+#define cpu_has_nofpuex 0
+#define cpu_icache_snoops_remote_store 1
+#endif
+
+#ifdef CONFIG_CPU_MIPS64
+#error This platform does not support 64bit.
+#endif
+
+#endif /* __ASM_MACH_PIC32_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-pic32/irq.h b/arch/mips/include/asm/mach-pic32/irq.h
new file mode 100644
index 000000000000..864330ce8838
--- /dev/null
+++ b/arch/mips/include/asm/mach-pic32/irq.h
@@ -0,0 +1,22 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef __ASM_MACH_PIC32_IRQ_H
+#define __ASM_MACH_PIC32_IRQ_H
+
+#define NR_IRQS 256
+#define MIPS_CPU_IRQ_BASE 0
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_PIC32_IRQ_H */
diff --git a/arch/mips/include/asm/mach-pic32/pic32.h b/arch/mips/include/asm/mach-pic32/pic32.h
new file mode 100644
index 000000000000..ce52e918daae
--- /dev/null
+++ b/arch/mips/include/asm/mach-pic32/pic32.h
@@ -0,0 +1,44 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef _ASM_MACH_PIC32_H
+#define _ASM_MACH_PIC32_H
+
+#include <linux/io.h>
+
+/*
+ * PIC32 register offsets for SET/CLR/INV where supported.
+ */
+#define PIC32_CLR(_reg) ((_reg) + 0x04)
+#define PIC32_SET(_reg) ((_reg) + 0x08)
+#define PIC32_INV(_reg) ((_reg) + 0x0C)
+
+/*
+ * PIC32 Base Register Offsets
+ */
+#define PIC32_BASE_CONFIG 0x1f800000
+#define PIC32_BASE_OSC 0x1f801200
+#define PIC32_BASE_RESET 0x1f801240
+#define PIC32_BASE_PPS 0x1f801400
+#define PIC32_BASE_UART 0x1f822000
+#define PIC32_BASE_PORT 0x1f860000
+#define PIC32_BASE_DEVCFG2 0x1fc4ff44
+
+/*
+ * Register unlock sequence required for some register access.
+ */
+void pic32_syskey_unlock_debug(const char *fn, const ulong ln);
+#define pic32_syskey_unlock() \
+ pic32_syskey_unlock_debug(__func__, __LINE__)
+
+#endif /* _ASM_MACH_PIC32_H */
diff --git a/arch/mips/include/asm/mach-pic32/spaces.h b/arch/mips/include/asm/mach-pic32/spaces.h
new file mode 100644
index 000000000000..046a0a9aa8b3
--- /dev/null
+++ b/arch/mips/include/asm/mach-pic32/spaces.h
@@ -0,0 +1,24 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef _ASM_MACH_PIC32_SPACES_H
+#define _ASM_MACH_PIC32_SPACES_H
+
+#ifdef CONFIG_PIC32MZDA
+#define PHYS_OFFSET _AC(0x08000000, UL)
+#define UNCAC_BASE _AC(0xa8000000, UL)
+#endif
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* __ASM_MACH_PIC32_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ralink/irq.h b/arch/mips/include/asm/mach-ralink/irq.h
new file mode 100644
index 000000000000..4321865e04b9
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_RALINK_IRQ_H
+#define __ASM_MACH_RALINK_IRQ_H
+
+#define GIC_NUM_INTRS 64
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-ralink/mt7621.h b/arch/mips/include/asm/mach-ralink/mt7621.h
new file mode 100644
index 000000000000..610b61e3f9df
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
@@ -0,0 +1,38 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _MT7621_REGS_H_
+#define _MT7621_REGS_H_
+
+#define MT7621_PALMBUS_BASE 0x1C000000
+#define MT7621_PALMBUS_SIZE 0x03FFFFFF
+
+#define MT7621_SYSC_BASE 0x1E000000
+
+#define SYSC_REG_CHIP_NAME0 0x00
+#define SYSC_REG_CHIP_NAME1 0x04
+#define SYSC_REG_CHIP_REV 0x0c
+#define SYSC_REG_SYSTEM_CONFIG0 0x10
+#define SYSC_REG_SYSTEM_CONFIG1 0x14
+
+#define CHIP_REV_PKG_MASK 0x1
+#define CHIP_REV_PKG_SHIFT 16
+#define CHIP_REV_VER_MASK 0xf
+#define CHIP_REV_VER_SHIFT 8
+#define CHIP_REV_ECO_MASK 0xf
+
+#define MT7621_DRAM_BASE 0x0
+#define MT7621_DDR2_SIZE_MIN 32
+#define MT7621_DDR2_SIZE_MAX 256
+
+#define MT7621_CHIP_NAME0 0x3637544D
+#define MT7621_CHIP_NAME1 0x20203132
+
+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
+
+#endif
diff --git a/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
new file mode 100644
index 000000000000..15db1b330fe8
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
@@ -0,0 +1,65 @@
+/*
+ * Ralink MT7621 specific CPU feature overrides
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef _MT7621_CPU_FEATURE_OVERRIDES_H
+#define _MT7621_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#define cpu_has_watch 1
+#define cpu_has_divec 1
+
+#define cpu_has_prefetch 1
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+
+#define cpu_has_mips16 1
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 1
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 1
+#define cpu_has_dsp2 0
+#define cpu_has_mipsmt 1
+
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+
+#define cpu_has_dc_aliases 0
+#define cpu_has_vtag_icache 0
+
+#define cpu_has_rixi 0
+#define cpu_has_tlbinv 0
+#define cpu_has_userlocal 1
+
+#endif /* _MT7621_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index 6516e9da5133..b196825a1de9 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -243,6 +243,10 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80)
#define CM_GCR_BASE_CMDEFTGT_IOCU0 2
#define CM_GCR_BASE_CMDEFTGT_IOCU1 3
+/* GCR_RESET_EXT_BASE register fields */
+#define CM_GCR_RESET_EXT_BASE_EVARESET BIT(31)
+#define CM_GCR_RESET_EXT_BASE_UEB BIT(30)
+
/* GCR_ACCESS register fields */
#define CM_GCR_ACCESS_ACCESSEN_SHF 0
#define CM_GCR_ACCESS_ACCESSEN_MSK (_ULCAST_(0xff) << 0)
diff --git a/arch/mips/include/asm/mips-r2-to-r6-emul.h b/arch/mips/include/asm/mips-r2-to-r6-emul.h
index 4b89f28047f7..1f6ea8352ca9 100644
--- a/arch/mips/include/asm/mips-r2-to-r6-emul.h
+++ b/arch/mips/include/asm/mips-r2-to-r6-emul.h
@@ -52,7 +52,7 @@ do { \
__this_cpu_inc(mipsr2emustats.M); \
err = __get_user(nir, (u32 __user *)regs->cp0_epc); \
if (!err) { \
- if (nir == BREAK_MATH) \
+ if (nir == BREAK_MATH(0)) \
__this_cpu_inc(mipsr2bdemustats.M); \
} \
preempt_enable(); \
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index e43aca183c99..3ad19ad04d8a 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -394,6 +394,8 @@
#define CAUSEF_IV (_ULCAST_(1) << 23)
#define CAUSEB_PCI 26
#define CAUSEF_PCI (_ULCAST_(1) << 26)
+#define CAUSEB_DC 27
+#define CAUSEF_DC (_ULCAST_(1) << 27)
#define CAUSEB_CE 28
#define CAUSEF_CE (_ULCAST_(3) << 28)
#define CAUSEB_TI 30
@@ -402,6 +404,38 @@
#define CAUSEF_BD (_ULCAST_(1) << 31)
/*
+ * Cause.ExcCode trap codes.
+ */
+#define EXCCODE_INT 0 /* Interrupt pending */
+#define EXCCODE_MOD 1 /* TLB modified fault */
+#define EXCCODE_TLBL 2 /* TLB miss on load or ifetch */
+#define EXCCODE_TLBS 3 /* TLB miss on a store */
+#define EXCCODE_ADEL 4 /* Address error on a load or ifetch */
+#define EXCCODE_ADES 5 /* Address error on a store */
+#define EXCCODE_IBE 6 /* Bus error on an ifetch */
+#define EXCCODE_DBE 7 /* Bus error on a load or store */
+#define EXCCODE_SYS 8 /* System call */
+#define EXCCODE_BP 9 /* Breakpoint */
+#define EXCCODE_RI 10 /* Reserved instruction exception */
+#define EXCCODE_CPU 11 /* Coprocessor unusable */
+#define EXCCODE_OV 12 /* Arithmetic overflow */
+#define EXCCODE_TR 13 /* Trap instruction */
+#define EXCCODE_MSAFPE 14 /* MSA floating point exception */
+#define EXCCODE_FPE 15 /* Floating point exception */
+#define EXCCODE_TLBRI 19 /* TLB Read-Inhibit exception */
+#define EXCCODE_TLBXI 20 /* TLB Execution-Inhibit exception */
+#define EXCCODE_MSADIS 21 /* MSA disabled exception */
+#define EXCCODE_MDMX 22 /* MDMX unusable exception */
+#define EXCCODE_WATCH 23 /* Watch address reference */
+#define EXCCODE_MCHECK 24 /* Machine check */
+#define EXCCODE_THREAD 25 /* Thread exceptions (MT) */
+#define EXCCODE_DSPDIS 26 /* DSP disabled exception */
+#define EXCCODE_GE 27 /* Virtualized guest exception (VZ) */
+
+/* Implementation specific trap codes used by MIPS cores */
+#define MIPS_EXCCODE_TLBPAR 16 /* TLB parity error exception */
+
+/*
* Bits in the coprocessor 0 config register.
*/
/* Generic bits. */
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 2046c0230224..21ed7150fec3 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -33,7 +33,7 @@
#define PAGE_SHIFT 16
#endif
#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE - 1))
+#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
/*
* This is used for calculating the real page sizes
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 6995b4a02e23..9a4fe0133ff1 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -353,7 +353,7 @@ static inline pte_t pte_mkdirty(pte_t pte)
static inline pte_t pte_mkyoung(pte_t pte)
{
pte_val(pte) |= _PAGE_ACCESSED;
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
if (!(pte_val(pte) & _PAGE_NO_READ))
pte_val(pte) |= _PAGE_SILENT_READ;
else
@@ -542,7 +542,7 @@ static inline pmd_t pmd_mkyoung(pmd_t pmd)
{
pmd_val(pmd) |= _PAGE_ACCESSED;
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
if (!(pmd_val(pmd) & _PAGE_NO_READ))
pmd_val(pmd) |= _PAGE_SILENT_READ;
else
diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h
index 9b44d5a816fa..ddea53e3a9bb 100644
--- a/arch/mips/include/uapi/asm/inst.h
+++ b/arch/mips/include/uapi/asm/inst.h
@@ -116,7 +116,8 @@ enum cop_op {
dmtc_op = 0x05, ctc_op = 0x06,
mthc0_op = 0x06, mthc_op = 0x07,
bc_op = 0x08, bc1eqz_op = 0x09,
- bc1nez_op = 0x0d, cop_op = 0x10,
+ mfmc0_op = 0x0b, bc1nez_op = 0x0d,
+ wrpgpr_op = 0x0e, cop_op = 0x10,
copm_op = 0x18
};
@@ -529,7 +530,7 @@ enum MIPS6e_i8_func {
};
/*
- * (microMIPS & MIPS16e) NOP instruction.
+ * (microMIPS) NOP instruction.
*/
#define MM_NOP16 0x0c00
@@ -679,7 +680,7 @@ struct fp0_format { /* FPU multiply and add format (MIPS32) */
;))))))
};
-struct mm_fp0_format { /* FPU multipy and add format (microMIPS) */
+struct mm_fp0_format { /* FPU multiply and add format (microMIPS) */
__BITFIELD_FIELD(unsigned int opcode : 6,
__BITFIELD_FIELD(unsigned int ft : 5,
__BITFIELD_FIELD(unsigned int fs : 5,
@@ -799,6 +800,13 @@ struct mm_x_format { /* Scaled indexed load format (microMIPS) */
;)))))
};
+struct mm_a_format { /* ADDIUPC format (microMIPS) */
+ __BITFIELD_FIELD(unsigned int opcode : 6,
+ __BITFIELD_FIELD(unsigned int rs : 3,
+ __BITFIELD_FIELD(signed int simmediate : 23,
+ ;)))
+};
+
/*
* microMIPS instruction formats (16-bit length)
*/
@@ -940,6 +948,7 @@ union mips_instruction {
struct mm_i_format mm_i_format;
struct mm_m_format mm_m_format;
struct mm_x_format mm_x_format;
+ struct mm_a_format mm_a_format;
struct mm_b0_format mm_b0_format;
struct mm_b1_format mm_b1_format;
struct mm16_m_format mm16_m_format ;
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index 09f4034f239f..6392dbe504fb 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -190,7 +190,7 @@ static inline void check_daddi(void)
printk("Checking for the daddi bug... ");
local_irq_save(flags);
- handler = set_except_vector(12, handle_daddi_ov);
+ handler = set_except_vector(EXCCODE_OV, handle_daddi_ov);
/*
* The following code fails to trigger an overflow exception
* when executed on R4000 rev. 2.2 or 3.0 (PRId 00000422 or
@@ -214,7 +214,7 @@ static inline void check_daddi(void)
".set pop"
: "=r" (v), "=&r" (tmp)
: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
- set_except_vector(12, handler);
+ set_except_vector(EXCCODE_OV, handler);
local_irq_restore(flags);
if (daddi_ov) {
@@ -225,14 +225,14 @@ static inline void check_daddi(void)
printk("yes, workaround... ");
local_irq_save(flags);
- handler = set_except_vector(12, handle_daddi_ov);
+ handler = set_except_vector(EXCCODE_OV, handle_daddi_ov);
asm volatile(
"addiu %1, $0, %2\n\t"
"dsrl %1, %1, 1\n\t"
"daddi %0, %1, %3"
: "=r" (v), "=&r" (tmp)
: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
- set_except_vector(12, handler);
+ set_except_vector(EXCCODE_OV, handler);
local_irq_restore(flags);
if (daddi_ov) {
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 6b9064499bd3..b725b713b9f8 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -99,6 +99,161 @@ static inline void cpu_set_fpu_fcsr_mask(struct cpuinfo_mips *c)
}
/*
+ * Determine the IEEE 754 NaN encodings and ABS.fmt/NEG.fmt execution modes
+ * supported by FPU hardware.
+ */
+static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
+{
+ if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+ MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+ unsigned long sr, fir, fcsr, fcsr0, fcsr1;
+
+ sr = read_c0_status();
+ __enable_fpu(FPU_AS_IS);
+
+ fir = read_32bit_cp1_register(CP1_REVISION);
+ if (fir & MIPS_FPIR_HAS2008) {
+ fcsr = read_32bit_cp1_register(CP1_STATUS);
+
+ fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+ write_32bit_cp1_register(CP1_STATUS, fcsr0);
+ fcsr0 = read_32bit_cp1_register(CP1_STATUS);
+
+ fcsr1 = fcsr | FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+ write_32bit_cp1_register(CP1_STATUS, fcsr1);
+ fcsr1 = read_32bit_cp1_register(CP1_STATUS);
+
+ write_32bit_cp1_register(CP1_STATUS, fcsr);
+
+ if (!(fcsr0 & FPU_CSR_NAN2008))
+ c->options |= MIPS_CPU_NAN_LEGACY;
+ if (fcsr1 & FPU_CSR_NAN2008)
+ c->options |= MIPS_CPU_NAN_2008;
+
+ if ((fcsr0 ^ fcsr1) & FPU_CSR_ABS2008)
+ c->fpu_msk31 &= ~FPU_CSR_ABS2008;
+ else
+ c->fpu_csr31 |= fcsr & FPU_CSR_ABS2008;
+
+ if ((fcsr0 ^ fcsr1) & FPU_CSR_NAN2008)
+ c->fpu_msk31 &= ~FPU_CSR_NAN2008;
+ else
+ c->fpu_csr31 |= fcsr & FPU_CSR_NAN2008;
+ } else {
+ c->options |= MIPS_CPU_NAN_LEGACY;
+ }
+
+ write_c0_status(sr);
+ } else {
+ c->options |= MIPS_CPU_NAN_LEGACY;
+ }
+}
+
+/*
+ * IEEE 754 conformance mode to use. Affects the NaN encoding and the
+ * ABS.fmt/NEG.fmt execution mode.
+ */
+static enum { STRICT, LEGACY, STD2008, RELAXED } ieee754 = STRICT;
+
+/*
+ * Set the IEEE 754 NaN encodings and the ABS.fmt/NEG.fmt execution modes
+ * to support by the FPU emulator according to the IEEE 754 conformance
+ * mode selected. Note that "relaxed" straps the emulator so that it
+ * allows 2008-NaN binaries even for legacy processors.
+ */
+static void cpu_set_nofpu_2008(struct cpuinfo_mips *c)
+{
+ c->options &= ~(MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY);
+ c->fpu_csr31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+ c->fpu_msk31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+
+ switch (ieee754) {
+ case STRICT:
+ if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+ MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+ c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
+ } else {
+ c->options |= MIPS_CPU_NAN_LEGACY;
+ c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+ }
+ break;
+ case LEGACY:
+ c->options |= MIPS_CPU_NAN_LEGACY;
+ c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+ break;
+ case STD2008:
+ c->options |= MIPS_CPU_NAN_2008;
+ c->fpu_csr31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+ c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+ break;
+ case RELAXED:
+ c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
+ break;
+ }
+}
+
+/*
+ * Override the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode
+ * according to the "ieee754=" parameter.
+ */
+static void cpu_set_nan_2008(struct cpuinfo_mips *c)
+{
+ switch (ieee754) {
+ case STRICT:
+ mips_use_nan_legacy = !!cpu_has_nan_legacy;
+ mips_use_nan_2008 = !!cpu_has_nan_2008;
+ break;
+ case LEGACY:
+ mips_use_nan_legacy = !!cpu_has_nan_legacy;
+ mips_use_nan_2008 = !cpu_has_nan_legacy;
+ break;
+ case STD2008:
+ mips_use_nan_legacy = !cpu_has_nan_2008;
+ mips_use_nan_2008 = !!cpu_has_nan_2008;
+ break;
+ case RELAXED:
+ mips_use_nan_legacy = true;
+ mips_use_nan_2008 = true;
+ break;
+ }
+}
+
+/*
+ * IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode override
+ * settings:
+ *
+ * strict: accept binaries that request a NaN encoding supported by the FPU
+ * legacy: only accept legacy-NaN binaries
+ * 2008: only accept 2008-NaN binaries
+ * relaxed: accept any binaries regardless of whether supported by the FPU
+ */
+static int __init ieee754_setup(char *s)
+{
+ if (!s)
+ return -1;
+ else if (!strcmp(s, "strict"))
+ ieee754 = STRICT;
+ else if (!strcmp(s, "legacy"))
+ ieee754 = LEGACY;
+ else if (!strcmp(s, "2008"))
+ ieee754 = STD2008;
+ else if (!strcmp(s, "relaxed"))
+ ieee754 = RELAXED;
+ else
+ return -1;
+
+ if (!(boot_cpu_data.options & MIPS_CPU_FPU))
+ cpu_set_nofpu_2008(&boot_cpu_data);
+ cpu_set_nan_2008(&boot_cpu_data);
+
+ return 0;
+}
+
+early_param("ieee754", ieee754_setup);
+
+/*
* Set the FIR feature flags for the FPU emulator.
*/
static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
@@ -113,6 +268,8 @@ static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W;
+ if (c->options & MIPS_CPU_NAN_2008)
+ value |= MIPS_FPIR_HAS2008;
c->fpu_id = value;
}
@@ -137,6 +294,8 @@ static void cpu_set_fpu_opts(struct cpuinfo_mips *c)
}
cpu_set_fpu_fcsr_mask(c);
+ cpu_set_fpu_2008(c);
+ cpu_set_nan_2008(c);
}
/*
@@ -147,6 +306,8 @@ static void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
c->options &= ~MIPS_CPU_FPU;
c->fpu_msk31 = mips_nofpu_msk31;
+ cpu_set_nofpu_2008(c);
+ cpu_set_nan_2008(c);
cpu_set_nofpu_id(c);
}
diff --git a/arch/mips/kernel/elf.c b/arch/mips/kernel/elf.c
index 4a4d9e067c89..c3c234dc0c07 100644
--- a/arch/mips/kernel/elf.c
+++ b/arch/mips/kernel/elf.c
@@ -11,6 +11,12 @@
#include <linux/elf.h>
#include <linux/sched.h>
+#include <asm/cpu-info.h>
+
+/* Whether to accept legacy-NaN and 2008-NaN user binaries. */
+bool mips_use_nan_legacy;
+bool mips_use_nan_2008;
+
/* FPU modes */
enum {
FP_FRE,
@@ -68,15 +74,23 @@ static struct mode_req none_req = { true, true, false, true, true };
int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
bool is_interp, struct arch_elf_state *state)
{
- struct elf32_hdr *ehdr32 = _ehdr;
+ union {
+ struct elf32_hdr e32;
+ struct elf64_hdr e64;
+ } *ehdr = _ehdr;
struct elf32_phdr *phdr32 = _phdr;
struct elf64_phdr *phdr64 = _phdr;
struct mips_elf_abiflags_v0 abiflags;
+ bool elf32;
+ u32 flags;
int ret;
+ elf32 = ehdr->e32.e_ident[EI_CLASS] == ELFCLASS32;
+ flags = elf32 ? ehdr->e32.e_flags : ehdr->e64.e_flags;
+
/* Lets see if this is an O32 ELF */
- if (ehdr32->e_ident[EI_CLASS] == ELFCLASS32) {
- if (ehdr32->e_flags & EF_MIPS_FP64) {
+ if (elf32) {
+ if (flags & EF_MIPS_FP64) {
/*
* Set MIPS_ABI_FP_OLD_64 for EF_MIPS_FP64. We will override it
* later if needed
@@ -120,13 +134,50 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
return 0;
}
-int arch_check_elf(void *_ehdr, bool has_interpreter,
+int arch_check_elf(void *_ehdr, bool has_interpreter, void *_interp_ehdr,
struct arch_elf_state *state)
{
- struct elf32_hdr *ehdr = _ehdr;
+ union {
+ struct elf32_hdr e32;
+ struct elf64_hdr e64;
+ } *ehdr = _ehdr;
+ union {
+ struct elf32_hdr e32;
+ struct elf64_hdr e64;
+ } *iehdr = _interp_ehdr;
struct mode_req prog_req, interp_req;
int fp_abi, interp_fp_abi, abi0, abi1, max_abi;
- bool is_mips64;
+ bool elf32;
+ u32 flags;
+
+ elf32 = ehdr->e32.e_ident[EI_CLASS] == ELFCLASS32;
+ flags = elf32 ? ehdr->e32.e_flags : ehdr->e64.e_flags;
+
+ /*
+ * Determine the NaN personality, reject the binary if not allowed.
+ * Also ensure that any interpreter matches the executable.
+ */
+ if (flags & EF_MIPS_NAN2008) {
+ if (mips_use_nan_2008)
+ state->nan_2008 = 1;
+ else
+ return -ENOEXEC;
+ } else {
+ if (mips_use_nan_legacy)
+ state->nan_2008 = 0;
+ else
+ return -ENOEXEC;
+ }
+ if (has_interpreter) {
+ bool ielf32;
+ u32 iflags;
+
+ ielf32 = iehdr->e32.e_ident[EI_CLASS] == ELFCLASS32;
+ iflags = ielf32 ? iehdr->e32.e_flags : iehdr->e64.e_flags;
+
+ if ((flags ^ iflags) & EF_MIPS_NAN2008)
+ return -ELIBBAD;
+ }
if (!config_enabled(CONFIG_MIPS_O32_FP64_SUPPORT))
return 0;
@@ -142,21 +193,18 @@ int arch_check_elf(void *_ehdr, bool has_interpreter,
abi0 = abi1 = fp_abi;
}
- is_mips64 = (ehdr->e_ident[EI_CLASS] == ELFCLASS64) ||
- (ehdr->e_flags & EF_MIPS_ABI2);
+ if (elf32 && !(flags & EF_MIPS_ABI2)) {
+ /* Default to a mode capable of running code expecting FR=0 */
+ state->overall_fp_mode = cpu_has_mips_r6 ? FP_FRE : FP_FR0;
- if (is_mips64) {
+ /* Allow all ABIs we know about */
+ max_abi = MIPS_ABI_FP_64A;
+ } else {
/* MIPS64 code always uses FR=1, thus the default is easy */
state->overall_fp_mode = FP_FR1;
/* Disallow access to the various FPXX & FP64 ABIs */
max_abi = MIPS_ABI_FP_SOFT;
- } else {
- /* Default to a mode capable of running code expecting FR=0 */
- state->overall_fp_mode = cpu_has_mips_r6 ? FP_FRE : FP_FR0;
-
- /* Allow all ABIs we know about */
- max_abi = MIPS_ABI_FP_64A;
}
if ((abi0 > max_abi && abi0 != MIPS_ABI_FP_UNKNOWN) ||
@@ -254,3 +302,27 @@ void mips_set_personality_fp(struct arch_elf_state *state)
BUG();
}
}
+
+/*
+ * Select the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode
+ * in FCSR according to the ELF NaN personality.
+ */
+void mips_set_personality_nan(struct arch_elf_state *state)
+{
+ struct cpuinfo_mips *c = &boot_cpu_data;
+ struct task_struct *t = current;
+
+ t->thread.fpu.fcr31 = c->fpu_csr31;
+ switch (state->nan_2008) {
+ case 0:
+ break;
+ case 1:
+ if (!(c->fpu_msk31 & FPU_CSR_NAN2008))
+ t->thread.fpu.fcr31 |= FPU_CSR_NAN2008;
+ if (!(c->fpu_msk31 & FPU_CSR_ABS2008))
+ t->thread.fpu.fcr31 |= FPU_CSR_ABS2008;
+ break;
+ default:
+ BUG();
+ }
+}
diff --git a/arch/mips/kernel/gpio_txx9.c b/arch/mips/kernel/gpio_txx9.c
index c6854d9df926..705be43c3533 100644
--- a/arch/mips/kernel/gpio_txx9.c
+++ b/arch/mips/kernel/gpio_txx9.c
@@ -21,7 +21,7 @@ static struct txx9_pio_reg __iomem *txx9_pioptr;
static int txx9_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
- return __raw_readl(&txx9_pioptr->din) & (1 << offset);
+ return !!(__raw_readl(&txx9_pioptr->din) & (1 << offset));
}
static void txx9_gpio_set_raw(unsigned int offset, int value)
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 4f0ac78d17f1..a5279b2f3198 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -548,9 +548,6 @@ static const struct pt_regs_offset regoffset_table[] = {
REG_OFFSET_NAME(c0_badvaddr, cp0_badvaddr),
REG_OFFSET_NAME(c0_cause, cp0_cause),
REG_OFFSET_NAME(c0_epc, cp0_epc),
-#ifdef CONFIG_MIPS_MT_SMTC
- REG_OFFSET_NAME(c0_tcstatus, cp0_tcstatus),
-#endif
#ifdef CONFIG_CPU_CAVIUM_OCTEON
REG_OFFSET_NAME(mpl0, mpl[0]),
REG_OFFSET_NAME(mpl1, mpl[1]),
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 66aac55df349..569a7d5242dd 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -623,7 +623,7 @@ static void __init request_crashkernel(struct resource *res)
#define USE_PROM_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER)
#define USE_DTB_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB)
-#define EXTEND_WITH_PROM IS_ENABLED(CONFIG_MIPS_CMDLINE_EXTEND)
+#define EXTEND_WITH_PROM IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND)
static void __init arch_mem_init(char **cmdline_p)
{
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index e04c8057b882..2ad4e4c96d61 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -202,6 +202,9 @@ static void boot_core(unsigned core)
/* Ensure its coherency is disabled */
write_gcr_co_coherence(0);
+ /* Start it with the legacy memory map and exception base */
+ write_gcr_co_reset_ext_base(CM_GCR_RESET_EXT_BASE_UEB);
+
/* Ensure the core can access the GCRs */
access = read_gcr_access();
access |= 1 << (CM_GCR_ACCESS_ACCESSEN_SHF + core);
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 2242bdd4370e..4472a7f98577 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -17,35 +17,23 @@
#include <asm/barrier.h>
#include <asm/mipsregs.h>
-static atomic_t count_start_flag = ATOMIC_INIT(0);
+static unsigned int initcount = 0;
static atomic_t count_count_start = ATOMIC_INIT(0);
static atomic_t count_count_stop = ATOMIC_INIT(0);
-static atomic_t count_reference = ATOMIC_INIT(0);
#define COUNTON 100
-#define NR_LOOPS 5
+#define NR_LOOPS 3
void synchronise_count_master(int cpu)
{
int i;
unsigned long flags;
- unsigned int initcount;
printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu);
local_irq_save(flags);
/*
- * Notify the slaves that it's time to start
- */
- atomic_set(&count_reference, read_c0_count());
- atomic_set(&count_start_flag, cpu);
- smp_wmb();
-
- /* Count will be initialised to current timer for all CPU's */
- initcount = read_c0_count();
-
- /*
* We loop a few times to get a primed instruction cache,
* then the last pass is more or less synchronised and
* the master and slaves each set their cycle counters to a known
@@ -63,9 +51,13 @@ void synchronise_count_master(int cpu)
atomic_set(&count_count_stop, 0);
smp_wmb();
- /* this lets the slaves write their count register */
+ /* Let the slave writes its count register */
atomic_inc(&count_count_start);
+ /* Count will be initialised to current timer */
+ if (i == 1)
+ initcount = read_c0_count();
+
/*
* Everyone initialises count in the last loop:
*/
@@ -73,7 +65,7 @@ void synchronise_count_master(int cpu)
write_c0_count(initcount);
/*
- * Wait for all slaves to leave the synchronization point:
+ * Wait for slave to leave the synchronization point:
*/
while (atomic_read(&count_count_stop) != 1)
mb();
@@ -83,7 +75,6 @@ void synchronise_count_master(int cpu)
}
/* Arrange for an interrupt in a short while */
write_c0_compare(read_c0_count() + COUNTON);
- atomic_set(&count_start_flag, 0);
local_irq_restore(flags);
@@ -98,19 +89,12 @@ void synchronise_count_master(int cpu)
void synchronise_count_slave(int cpu)
{
int i;
- unsigned int initcount;
/*
* Not every cpu is online at the time this gets called,
* so we first wait for the master to say everyone is ready
*/
- while (atomic_read(&count_start_flag) != cpu)
- mb();
-
- /* Count will be initialised to next expire for all CPU's */
- initcount = atomic_read(&count_reference);
-
for (i = 0; i < NR_LOOPS; i++) {
atomic_inc(&count_count_start);
while (atomic_read(&count_count_start) != 2)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 886cb1976e90..bafcb7ad5c85 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -2250,7 +2250,7 @@ void __init trap_init(void)
* Only some CPUs have the watch exceptions.
*/
if (cpu_has_watch)
- set_except_vector(23, handle_watch);
+ set_except_vector(EXCCODE_WATCH, handle_watch);
/*
* Initialise interrupt handlers
@@ -2277,27 +2277,27 @@ void __init trap_init(void)
if (board_be_init)
board_be_init();
- set_except_vector(0, using_rollback_handler() ? rollback_handle_int
- : handle_int);
- set_except_vector(1, handle_tlbm);
- set_except_vector(2, handle_tlbl);
- set_except_vector(3, handle_tlbs);
+ set_except_vector(EXCCODE_INT, using_rollback_handler() ?
+ rollback_handle_int : handle_int);
+ set_except_vector(EXCCODE_MOD, handle_tlbm);
+ set_except_vector(EXCCODE_TLBL, handle_tlbl);
+ set_except_vector(EXCCODE_TLBS, handle_tlbs);
- set_except_vector(4, handle_adel);
- set_except_vector(5, handle_ades);
+ set_except_vector(EXCCODE_ADEL, handle_adel);
+ set_except_vector(EXCCODE_ADES, handle_ades);
- set_except_vector(6, handle_ibe);
- set_except_vector(7, handle_dbe);
+ set_except_vector(EXCCODE_IBE, handle_ibe);
+ set_except_vector(EXCCODE_DBE, handle_dbe);
- set_except_vector(8, handle_sys);
- set_except_vector(9, handle_bp);
- set_except_vector(10, rdhwr_noopt ? handle_ri :
+ set_except_vector(EXCCODE_SYS, handle_sys);
+ set_except_vector(EXCCODE_BP, handle_bp);
+ set_except_vector(EXCCODE_RI, rdhwr_noopt ? handle_ri :
(cpu_has_vtag_icache ?
handle_ri_rdhwr_vivt : handle_ri_rdhwr));
- set_except_vector(11, handle_cpu);
- set_except_vector(12, handle_ov);
- set_except_vector(13, handle_tr);
- set_except_vector(14, handle_msa_fpe);
+ set_except_vector(EXCCODE_CPU, handle_cpu);
+ set_except_vector(EXCCODE_OV, handle_ov);
+ set_except_vector(EXCCODE_TR, handle_tr);
+ set_except_vector(EXCCODE_MSAFPE, handle_msa_fpe);
if (current_cpu_type() == CPU_R6000 ||
current_cpu_type() == CPU_R6000A) {
@@ -2318,25 +2318,25 @@ void __init trap_init(void)
board_nmi_handler_setup();
if (cpu_has_fpu && !cpu_has_nofpuex)
- set_except_vector(15, handle_fpe);
+ set_except_vector(EXCCODE_FPE, handle_fpe);
- set_except_vector(16, handle_ftlb);
+ set_except_vector(MIPS_EXCCODE_TLBPAR, handle_ftlb);
if (cpu_has_rixiex) {
- set_except_vector(19, tlb_do_page_fault_0);
- set_except_vector(20, tlb_do_page_fault_0);
+ set_except_vector(EXCCODE_TLBRI, tlb_do_page_fault_0);
+ set_except_vector(EXCCODE_TLBXI, tlb_do_page_fault_0);
}
- set_except_vector(21, handle_msa);
- set_except_vector(22, handle_mdmx);
+ set_except_vector(EXCCODE_MSADIS, handle_msa);
+ set_except_vector(EXCCODE_MDMX, handle_mdmx);
if (cpu_has_mcheck)
- set_except_vector(24, handle_mcheck);
+ set_except_vector(EXCCODE_MCHECK, handle_mcheck);
if (cpu_has_mipsmt)
- set_except_vector(25, handle_mt);
+ set_except_vector(EXCCODE_THREAD, handle_mt);
- set_except_vector(26, handle_dsp);
+ set_except_vector(EXCCODE_DSPDIS, handle_dsp);
if (board_cache_error_setup)
board_cache_error_setup();
diff --git a/arch/mips/kvm/callback.c b/arch/mips/kvm/callback.c
index 313c2e37b978..d88aa2173fb0 100644
--- a/arch/mips/kvm/callback.c
+++ b/arch/mips/kvm/callback.c
@@ -11,4 +11,4 @@
#include <linux/kvm_host.h>
struct kvm_mips_callbacks *kvm_mips_callbacks;
-EXPORT_SYMBOL(kvm_mips_callbacks);
+EXPORT_SYMBOL_GPL(kvm_mips_callbacks);
diff --git a/arch/mips/kvm/dyntrans.c b/arch/mips/kvm/dyntrans.c
index 521121bdebff..f1527a465c1b 100644
--- a/arch/mips/kvm/dyntrans.c
+++ b/arch/mips/kvm/dyntrans.c
@@ -86,10 +86,8 @@ int kvm_mips_trans_mfc0(uint32_t inst, uint32_t *opc, struct kvm_vcpu *vcpu)
} else {
mfc0_inst = LW_TEMPLATE;
mfc0_inst |= ((rt & 0x1f) << 16);
- mfc0_inst |=
- offsetof(struct mips_coproc,
- reg[rd][sel]) + offsetof(struct kvm_mips_commpage,
- cop0);
+ mfc0_inst |= offsetof(struct kvm_mips_commpage,
+ cop0.reg[rd][sel]);
}
if (KVM_GUEST_KSEGX(opc) == KVM_GUEST_KSEG0) {
@@ -123,9 +121,7 @@ int kvm_mips_trans_mtc0(uint32_t inst, uint32_t *opc, struct kvm_vcpu *vcpu)
sel = inst & 0x7;
mtc0_inst |= ((rt & 0x1f) << 16);
- mtc0_inst |=
- offsetof(struct mips_coproc,
- reg[rd][sel]) + offsetof(struct kvm_mips_commpage, cop0);
+ mtc0_inst |= offsetof(struct kvm_mips_commpage, cop0.reg[rd][sel]);
if (KVM_GUEST_KSEGX(opc) == KVM_GUEST_KSEG0) {
kseg0_opc =
diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c
index 1b675c7ce89f..b37954cc880d 100644
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -20,6 +20,7 @@
#include <linux/random.h>
#include <asm/page.h>
#include <asm/cacheflush.h>
+#include <asm/cacheops.h>
#include <asm/cpu-info.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
@@ -29,7 +30,6 @@
#include <asm/r4kcache.h>
#define CONFIG_MIPS_MT
-#include "opcode.h"
#include "interrupt.h"
#include "commpage.h"
@@ -1239,21 +1239,20 @@ enum emulation_result kvm_mips_emulate_CP0(uint32_t inst, uint32_t *opc,
er = EMULATE_FAIL;
break;
- case mfmcz_op:
+ case mfmc0_op:
#ifdef KVM_MIPS_DEBUG_COP0_COUNTERS
cop0->stat[MIPS_CP0_STATUS][0]++;
#endif
- if (rt != 0) {
+ if (rt != 0)
vcpu->arch.gprs[rt] =
kvm_read_c0_guest_status(cop0);
- }
/* EI */
if (inst & 0x20) {
- kvm_debug("[%#lx] mfmcz_op: EI\n",
+ kvm_debug("[%#lx] mfmc0_op: EI\n",
vcpu->arch.pc);
kvm_set_c0_guest_status(cop0, ST0_IE);
} else {
- kvm_debug("[%#lx] mfmcz_op: DI\n",
+ kvm_debug("[%#lx] mfmc0_op: DI\n",
vcpu->arch.pc);
kvm_clear_c0_guest_status(cop0, ST0_IE);
}
@@ -1545,19 +1544,6 @@ int kvm_mips_sync_icache(unsigned long va, struct kvm_vcpu *vcpu)
return 0;
}
-#define MIPS_CACHE_OP_INDEX_INV 0x0
-#define MIPS_CACHE_OP_INDEX_LD_TAG 0x1
-#define MIPS_CACHE_OP_INDEX_ST_TAG 0x2
-#define MIPS_CACHE_OP_IMP 0x3
-#define MIPS_CACHE_OP_HIT_INV 0x4
-#define MIPS_CACHE_OP_FILL_WB_INV 0x5
-#define MIPS_CACHE_OP_HIT_HB 0x6
-#define MIPS_CACHE_OP_FETCH_LOCK 0x7
-
-#define MIPS_CACHE_ICACHE 0x0
-#define MIPS_CACHE_DCACHE 0x1
-#define MIPS_CACHE_SEC 0x3
-
enum emulation_result kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc,
uint32_t cause,
struct kvm_run *run,
@@ -1582,8 +1568,8 @@ enum emulation_result kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc,
base = (inst >> 21) & 0x1f;
op_inst = (inst >> 16) & 0x1f;
offset = (int16_t)inst;
- cache = (inst >> 16) & 0x3;
- op = (inst >> 18) & 0x7;
+ cache = op_inst & CacheOp_Cache;
+ op = op_inst & CacheOp_Op;
va = arch->gprs[base] + offset;
@@ -1595,14 +1581,14 @@ enum emulation_result kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc,
* invalidate the caches entirely by stepping through all the
* ways/indexes
*/
- if (op == MIPS_CACHE_OP_INDEX_INV) {
+ if (op == Index_Writeback_Inv) {
kvm_debug("@ %#lx/%#lx CACHE (cache: %#x, op: %#x, base[%d]: %#lx, offset: %#x\n",
vcpu->arch.pc, vcpu->arch.gprs[31], cache, op, base,
arch->gprs[base], offset);
- if (cache == MIPS_CACHE_DCACHE)
+ if (cache == Cache_D)
r4k_blast_dcache();
- else if (cache == MIPS_CACHE_ICACHE)
+ else if (cache == Cache_I)
r4k_blast_icache();
else {
kvm_err("%s: unsupported CACHE INDEX operation\n",
@@ -1675,9 +1661,7 @@ enum emulation_result kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc,
skip_fault:
/* XXXKYMA: Only a subset of cache ops are supported, used by Linux */
- if (cache == MIPS_CACHE_DCACHE
- && (op == MIPS_CACHE_OP_FILL_WB_INV
- || op == MIPS_CACHE_OP_HIT_INV)) {
+ if (op_inst == Hit_Writeback_Inv_D || op_inst == Hit_Invalidate_D) {
flush_dcache_line(va);
#ifdef CONFIG_KVM_MIPS_DYN_TRANS
@@ -1687,7 +1671,7 @@ skip_fault:
*/
kvm_mips_trans_cache_va(inst, opc, vcpu);
#endif
- } else if (op == MIPS_CACHE_OP_HIT_INV && cache == MIPS_CACHE_ICACHE) {
+ } else if (op_inst == Hit_Invalidate_I) {
flush_dcache_line(va);
flush_icache_line(va);
@@ -1781,7 +1765,7 @@ enum emulation_result kvm_mips_emulate_syscall(unsigned long cause,
kvm_debug("Delivering SYSCALL @ pc %#lx\n", arch->pc);
kvm_change_c0_guest_cause(cop0, (0xff),
- (T_SYSCALL << CAUSEB_EXCCODE));
+ (EXCCODE_SYS << CAUSEB_EXCCODE));
/* Set PC to the exception entry point */
arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -1828,7 +1812,7 @@ enum emulation_result kvm_mips_emulate_tlbmiss_ld(unsigned long cause,
}
kvm_change_c0_guest_cause(cop0, (0xff),
- (T_TLB_LD_MISS << CAUSEB_EXCCODE));
+ (EXCCODE_TLBL << CAUSEB_EXCCODE));
/* setup badvaddr, context and entryhi registers for the guest */
kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr);
@@ -1874,7 +1858,7 @@ enum emulation_result kvm_mips_emulate_tlbinv_ld(unsigned long cause,
}
kvm_change_c0_guest_cause(cop0, (0xff),
- (T_TLB_LD_MISS << CAUSEB_EXCCODE));
+ (EXCCODE_TLBL << CAUSEB_EXCCODE));
/* setup badvaddr, context and entryhi registers for the guest */
kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr);
@@ -1918,7 +1902,7 @@ enum emulation_result kvm_mips_emulate_tlbmiss_st(unsigned long cause,
}
kvm_change_c0_guest_cause(cop0, (0xff),
- (T_TLB_ST_MISS << CAUSEB_EXCCODE));
+ (EXCCODE_TLBS << CAUSEB_EXCCODE));
/* setup badvaddr, context and entryhi registers for the guest */
kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr);
@@ -1962,7 +1946,7 @@ enum emulation_result kvm_mips_emulate_tlbinv_st(unsigned long cause,
}
kvm_change_c0_guest_cause(cop0, (0xff),
- (T_TLB_ST_MISS << CAUSEB_EXCCODE));
+ (EXCCODE_TLBS << CAUSEB_EXCCODE));
/* setup badvaddr, context and entryhi registers for the guest */
kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr);
@@ -2033,7 +2017,8 @@ enum emulation_result kvm_mips_emulate_tlbmod(unsigned long cause,
arch->pc = KVM_GUEST_KSEG0 + 0x180;
}
- kvm_change_c0_guest_cause(cop0, (0xff), (T_TLB_MOD << CAUSEB_EXCCODE));
+ kvm_change_c0_guest_cause(cop0, (0xff),
+ (EXCCODE_MOD << CAUSEB_EXCCODE));
/* setup badvaddr, context and entryhi registers for the guest */
kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr);
@@ -2068,7 +2053,7 @@ enum emulation_result kvm_mips_emulate_fpu_exc(unsigned long cause,
arch->pc = KVM_GUEST_KSEG0 + 0x180;
kvm_change_c0_guest_cause(cop0, (0xff),
- (T_COP_UNUSABLE << CAUSEB_EXCCODE));
+ (EXCCODE_CPU << CAUSEB_EXCCODE));
kvm_change_c0_guest_cause(cop0, (CAUSEF_CE), (0x1 << CAUSEB_CE));
return EMULATE_DONE;
@@ -2096,7 +2081,7 @@ enum emulation_result kvm_mips_emulate_ri_exc(unsigned long cause,
kvm_debug("Delivering RI @ pc %#lx\n", arch->pc);
kvm_change_c0_guest_cause(cop0, (0xff),
- (T_RES_INST << CAUSEB_EXCCODE));
+ (EXCCODE_RI << CAUSEB_EXCCODE));
/* Set PC to the exception entry point */
arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -2131,7 +2116,7 @@ enum emulation_result kvm_mips_emulate_bp_exc(unsigned long cause,
kvm_debug("Delivering BP @ pc %#lx\n", arch->pc);
kvm_change_c0_guest_cause(cop0, (0xff),
- (T_BREAK << CAUSEB_EXCCODE));
+ (EXCCODE_BP << CAUSEB_EXCCODE));
/* Set PC to the exception entry point */
arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -2166,7 +2151,7 @@ enum emulation_result kvm_mips_emulate_trap_exc(unsigned long cause,
kvm_debug("Delivering TRAP @ pc %#lx\n", arch->pc);
kvm_change_c0_guest_cause(cop0, (0xff),
- (T_TRAP << CAUSEB_EXCCODE));
+ (EXCCODE_TR << CAUSEB_EXCCODE));
/* Set PC to the exception entry point */
arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -2201,7 +2186,7 @@ enum emulation_result kvm_mips_emulate_msafpe_exc(unsigned long cause,
kvm_debug("Delivering MSAFPE @ pc %#lx\n", arch->pc);
kvm_change_c0_guest_cause(cop0, (0xff),
- (T_MSAFPE << CAUSEB_EXCCODE));
+ (EXCCODE_MSAFPE << CAUSEB_EXCCODE));
/* Set PC to the exception entry point */
arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -2236,7 +2221,7 @@ enum emulation_result kvm_mips_emulate_fpe_exc(unsigned long cause,
kvm_debug("Delivering FPE @ pc %#lx\n", arch->pc);
kvm_change_c0_guest_cause(cop0, (0xff),
- (T_FPE << CAUSEB_EXCCODE));
+ (EXCCODE_FPE << CAUSEB_EXCCODE));
/* Set PC to the exception entry point */
arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -2271,7 +2256,7 @@ enum emulation_result kvm_mips_emulate_msadis_exc(unsigned long cause,
kvm_debug("Delivering MSADIS @ pc %#lx\n", arch->pc);
kvm_change_c0_guest_cause(cop0, (0xff),
- (T_MSADIS << CAUSEB_EXCCODE));
+ (EXCCODE_MSADIS << CAUSEB_EXCCODE));
/* Set PC to the exception entry point */
arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -2480,25 +2465,25 @@ enum emulation_result kvm_mips_check_privilege(unsigned long cause,
if (usermode) {
switch (exccode) {
- case T_INT:
- case T_SYSCALL:
- case T_BREAK:
- case T_RES_INST:
- case T_TRAP:
- case T_MSAFPE:
- case T_FPE:
- case T_MSADIS:
+ case EXCCODE_INT:
+ case EXCCODE_SYS:
+ case EXCCODE_BP:
+ case EXCCODE_RI:
+ case EXCCODE_TR:
+ case EXCCODE_MSAFPE:
+ case EXCCODE_FPE:
+ case EXCCODE_MSADIS:
break;
- case T_COP_UNUSABLE:
+ case EXCCODE_CPU:
if (((cause & CAUSEF_CE) >> CAUSEB_CE) == 0)
er = EMULATE_PRIV_FAIL;
break;
- case T_TLB_MOD:
+ case EXCCODE_MOD:
break;
- case T_TLB_LD_MISS:
+ case EXCCODE_TLBL:
/*
* We we are accessing Guest kernel space, then send an
* address error exception to the guest
@@ -2507,12 +2492,12 @@ enum emulation_result kvm_mips_check_privilege(unsigned long cause,
kvm_debug("%s: LD MISS @ %#lx\n", __func__,
badvaddr);
cause &= ~0xff;
- cause |= (T_ADDR_ERR_LD << CAUSEB_EXCCODE);
+ cause |= (EXCCODE_ADEL << CAUSEB_EXCCODE);
er = EMULATE_PRIV_FAIL;
}
break;
- case T_TLB_ST_MISS:
+ case EXCCODE_TLBS:
/*
* We we are accessing Guest kernel space, then send an
* address error exception to the guest
@@ -2521,26 +2506,26 @@ enum emulation_result kvm_mips_check_privilege(unsigned long cause,
kvm_debug("%s: ST MISS @ %#lx\n", __func__,
badvaddr);
cause &= ~0xff;
- cause |= (T_ADDR_ERR_ST << CAUSEB_EXCCODE);
+ cause |= (EXCCODE_ADES << CAUSEB_EXCCODE);
er = EMULATE_PRIV_FAIL;
}
break;
- case T_ADDR_ERR_ST:
+ case EXCCODE_ADES:
kvm_debug("%s: address error ST @ %#lx\n", __func__,
badvaddr);
if ((badvaddr & PAGE_MASK) == KVM_GUEST_COMMPAGE_ADDR) {
cause &= ~0xff;
- cause |= (T_TLB_ST_MISS << CAUSEB_EXCCODE);
+ cause |= (EXCCODE_TLBS << CAUSEB_EXCCODE);
}
er = EMULATE_PRIV_FAIL;
break;
- case T_ADDR_ERR_LD:
+ case EXCCODE_ADEL:
kvm_debug("%s: address error LD @ %#lx\n", __func__,
badvaddr);
if ((badvaddr & PAGE_MASK) == KVM_GUEST_COMMPAGE_ADDR) {
cause &= ~0xff;
- cause |= (T_TLB_LD_MISS << CAUSEB_EXCCODE);
+ cause |= (EXCCODE_TLBL << CAUSEB_EXCCODE);
}
er = EMULATE_PRIV_FAIL;
break;
@@ -2583,13 +2568,12 @@ enum emulation_result kvm_mips_handle_tlbmiss(unsigned long cause,
* an entry into the guest TLB.
*/
index = kvm_mips_guest_tlb_lookup(vcpu,
- (va & VPN2_MASK) |
- (kvm_read_c0_guest_entryhi
- (vcpu->arch.cop0) & ASID_MASK));
+ (va & VPN2_MASK) |
+ (kvm_read_c0_guest_entryhi(vcpu->arch.cop0) & ASID_MASK));
if (index < 0) {
- if (exccode == T_TLB_LD_MISS) {
+ if (exccode == EXCCODE_TLBL) {
er = kvm_mips_emulate_tlbmiss_ld(cause, opc, run, vcpu);
- } else if (exccode == T_TLB_ST_MISS) {
+ } else if (exccode == EXCCODE_TLBS) {
er = kvm_mips_emulate_tlbmiss_st(cause, opc, run, vcpu);
} else {
kvm_err("%s: invalid exc code: %d\n", __func__,
@@ -2604,10 +2588,10 @@ enum emulation_result kvm_mips_handle_tlbmiss(unsigned long cause,
* exception to the guest
*/
if (!TLB_IS_VALID(*tlb, va)) {
- if (exccode == T_TLB_LD_MISS) {
+ if (exccode == EXCCODE_TLBL) {
er = kvm_mips_emulate_tlbinv_ld(cause, opc, run,
vcpu);
- } else if (exccode == T_TLB_ST_MISS) {
+ } else if (exccode == EXCCODE_TLBS) {
er = kvm_mips_emulate_tlbinv_st(cause, opc, run,
vcpu);
} else {
diff --git a/arch/mips/kvm/interrupt.c b/arch/mips/kvm/interrupt.c
index 9b4445940c2b..95f790663b0c 100644
--- a/arch/mips/kvm/interrupt.c
+++ b/arch/mips/kvm/interrupt.c
@@ -128,7 +128,7 @@ int kvm_mips_irq_deliver_cb(struct kvm_vcpu *vcpu, unsigned int priority,
&& (!(kvm_read_c0_guest_status(cop0) & (ST0_EXL | ST0_ERL)))
&& (kvm_read_c0_guest_status(cop0) & IE_IRQ5)) {
allowed = 1;
- exccode = T_INT;
+ exccode = EXCCODE_INT;
}
break;
@@ -137,7 +137,7 @@ int kvm_mips_irq_deliver_cb(struct kvm_vcpu *vcpu, unsigned int priority,
&& (!(kvm_read_c0_guest_status(cop0) & (ST0_EXL | ST0_ERL)))
&& (kvm_read_c0_guest_status(cop0) & IE_IRQ0)) {
allowed = 1;
- exccode = T_INT;
+ exccode = EXCCODE_INT;
}
break;
@@ -146,7 +146,7 @@ int kvm_mips_irq_deliver_cb(struct kvm_vcpu *vcpu, unsigned int priority,
&& (!(kvm_read_c0_guest_status(cop0) & (ST0_EXL | ST0_ERL)))
&& (kvm_read_c0_guest_status(cop0) & IE_IRQ1)) {
allowed = 1;
- exccode = T_INT;
+ exccode = EXCCODE_INT;
}
break;
@@ -155,7 +155,7 @@ int kvm_mips_irq_deliver_cb(struct kvm_vcpu *vcpu, unsigned int priority,
&& (!(kvm_read_c0_guest_status(cop0) & (ST0_EXL | ST0_ERL)))
&& (kvm_read_c0_guest_status(cop0) & IE_IRQ2)) {
allowed = 1;
- exccode = T_INT;
+ exccode = EXCCODE_INT;
}
break;
diff --git a/arch/mips/kvm/locore.S b/arch/mips/kvm/locore.S
index 7e2210846b8b..81687ab1b523 100644
--- a/arch/mips/kvm/locore.S
+++ b/arch/mips/kvm/locore.S
@@ -335,7 +335,7 @@ NESTED (MIPSX(GuestException), CALLFRAME_SIZ, ra)
/* Now restore the host state just enough to run the handlers */
- /* Swtich EBASE to the one used by Linux */
+ /* Switch EBASE to the one used by Linux */
/* load up the host EBASE */
mfc0 v0, CP0_STATUS
@@ -490,11 +490,11 @@ __kvm_mips_return_to_guest:
REG_ADDU t3, t1, t2
LONG_L k0, (t3)
andi k0, k0, 0xff
- mtc0 k0,CP0_ENTRYHI
+ mtc0 k0, CP0_ENTRYHI
ehb
/* Disable RDHWR access */
- mtc0 zero, CP0_HWRENA
+ mtc0 zero, CP0_HWRENA
/* load the guest context from VCPU and return */
LONG_L $0, VCPU_R0(k1)
@@ -606,11 +606,11 @@ __kvm_mips_return_to_host:
/* Restore RDHWR access */
PTR_LI k0, 0x2000000F
- mtc0 k0, CP0_HWRENA
+ mtc0 k0, CP0_HWRENA
/* Restore RA, which is the address we will return to */
- LONG_L ra, PT_R31(k1)
- j ra
+ LONG_L ra, PT_R31(k1)
+ j ra
nop
VECTOR_END(MIPSX(GuestExceptionEnd))
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index b9b803facdbf..8bc3977576e6 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -229,7 +229,7 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
kzalloc(npages * sizeof(unsigned long), GFP_KERNEL);
if (!kvm->arch.guest_pmap) {
- kvm_err("Failed to allocate guest PMAP");
+ kvm_err("Failed to allocate guest PMAP\n");
return;
}
@@ -1264,8 +1264,8 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
}
switch (exccode) {
- case T_INT:
- kvm_debug("[%d]T_INT @ %p\n", vcpu->vcpu_id, opc);
+ case EXCCODE_INT:
+ kvm_debug("[%d]EXCCODE_INT @ %p\n", vcpu->vcpu_id, opc);
++vcpu->stat.int_exits;
trace_kvm_exit(vcpu, INT_EXITS);
@@ -1276,8 +1276,8 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
ret = RESUME_GUEST;
break;
- case T_COP_UNUSABLE:
- kvm_debug("T_COP_UNUSABLE: @ PC: %p\n", opc);
+ case EXCCODE_CPU:
+ kvm_debug("EXCCODE_CPU: @ PC: %p\n", opc);
++vcpu->stat.cop_unusable_exits;
trace_kvm_exit(vcpu, COP_UNUSABLE_EXITS);
@@ -1287,13 +1287,13 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
ret = RESUME_HOST;
break;
- case T_TLB_MOD:
+ case EXCCODE_MOD:
++vcpu->stat.tlbmod_exits;
trace_kvm_exit(vcpu, TLBMOD_EXITS);
ret = kvm_mips_callbacks->handle_tlb_mod(vcpu);
break;
- case T_TLB_ST_MISS:
+ case EXCCODE_TLBS:
kvm_debug("TLB ST fault: cause %#x, status %#lx, PC: %p, BadVaddr: %#lx\n",
cause, kvm_read_c0_guest_status(vcpu->arch.cop0), opc,
badvaddr);
@@ -1303,7 +1303,7 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
ret = kvm_mips_callbacks->handle_tlb_st_miss(vcpu);
break;
- case T_TLB_LD_MISS:
+ case EXCCODE_TLBL:
kvm_debug("TLB LD fault: cause %#x, PC: %p, BadVaddr: %#lx\n",
cause, opc, badvaddr);
@@ -1312,55 +1312,55 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
ret = kvm_mips_callbacks->handle_tlb_ld_miss(vcpu);
break;
- case T_ADDR_ERR_ST:
+ case EXCCODE_ADES:
++vcpu->stat.addrerr_st_exits;
trace_kvm_exit(vcpu, ADDRERR_ST_EXITS);
ret = kvm_mips_callbacks->handle_addr_err_st(vcpu);
break;
- case T_ADDR_ERR_LD:
+ case EXCCODE_ADEL:
++vcpu->stat.addrerr_ld_exits;
trace_kvm_exit(vcpu, ADDRERR_LD_EXITS);
ret = kvm_mips_callbacks->handle_addr_err_ld(vcpu);
break;
- case T_SYSCALL:
+ case EXCCODE_SYS:
++vcpu->stat.syscall_exits;
trace_kvm_exit(vcpu, SYSCALL_EXITS);
ret = kvm_mips_callbacks->handle_syscall(vcpu);
break;
- case T_RES_INST:
+ case EXCCODE_RI:
++vcpu->stat.resvd_inst_exits;
trace_kvm_exit(vcpu, RESVD_INST_EXITS);
ret = kvm_mips_callbacks->handle_res_inst(vcpu);
break;
- case T_BREAK:
+ case EXCCODE_BP:
++vcpu->stat.break_inst_exits;
trace_kvm_exit(vcpu, BREAK_INST_EXITS);
ret = kvm_mips_callbacks->handle_break(vcpu);
break;
- case T_TRAP:
+ case EXCCODE_TR:
++vcpu->stat.trap_inst_exits;
trace_kvm_exit(vcpu, TRAP_INST_EXITS);
ret = kvm_mips_callbacks->handle_trap(vcpu);
break;
- case T_MSAFPE:
+ case EXCCODE_MSAFPE:
++vcpu->stat.msa_fpe_exits;
trace_kvm_exit(vcpu, MSA_FPE_EXITS);
ret = kvm_mips_callbacks->handle_msa_fpe(vcpu);
break;
- case T_FPE:
+ case EXCCODE_FPE:
++vcpu->stat.fpe_exits;
trace_kvm_exit(vcpu, FPE_EXITS);
ret = kvm_mips_callbacks->handle_fpe(vcpu);
break;
- case T_MSADIS:
+ case EXCCODE_MSADIS:
++vcpu->stat.msa_disabled_exits;
trace_kvm_exit(vcpu, MSA_DISABLED_EXITS);
ret = kvm_mips_callbacks->handle_msa_disabled(vcpu);
@@ -1620,7 +1620,7 @@ static struct notifier_block kvm_mips_csr_die_notifier = {
.notifier_call = kvm_mips_csr_die_notify,
};
-int __init kvm_mips_init(void)
+static int __init kvm_mips_init(void)
{
int ret;
@@ -1646,7 +1646,7 @@ int __init kvm_mips_init(void)
return 0;
}
-void __exit kvm_mips_exit(void)
+static void __exit kvm_mips_exit(void)
{
kvm_exit();
diff --git a/arch/mips/kvm/opcode.h b/arch/mips/kvm/opcode.h
deleted file mode 100644
index 03a6ae84c7df..000000000000
--- a/arch/mips/kvm/opcode.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- * Authors: Sanjay Lal <sanjayl@kymasys.com>
- */
-
-/* Define opcode values not defined in <asm/isnt.h> */
-
-#ifndef __KVM_MIPS_OPCODE_H__
-#define __KVM_MIPS_OPCODE_H__
-
-/* COP0 Ops */
-#define mfmcz_op 0x0b /* 01011 */
-#define wrpgpr_op 0x0e /* 01110 */
-
-/* COP0 opcodes (only if COP0 and CO=1): */
-#define wait_op 0x20 /* 100000 */
-
-#endif /* __KVM_MIPS_OPCODE_H__ */
diff --git a/arch/mips/kvm/tlb.c b/arch/mips/kvm/tlb.c
index 570479c03bdc..a08c43946247 100644
--- a/arch/mips/kvm/tlb.c
+++ b/arch/mips/kvm/tlb.c
@@ -35,17 +35,17 @@
#define PRIx64 "llx"
atomic_t kvm_mips_instance;
-EXPORT_SYMBOL(kvm_mips_instance);
+EXPORT_SYMBOL_GPL(kvm_mips_instance);
/* These function pointers are initialized once the KVM module is loaded */
kvm_pfn_t (*kvm_mips_gfn_to_pfn)(struct kvm *kvm, gfn_t gfn);
-EXPORT_SYMBOL(kvm_mips_gfn_to_pfn);
+EXPORT_SYMBOL_GPL(kvm_mips_gfn_to_pfn);
void (*kvm_mips_release_pfn_clean)(kvm_pfn_t pfn);
-EXPORT_SYMBOL(kvm_mips_release_pfn_clean);
+EXPORT_SYMBOL_GPL(kvm_mips_release_pfn_clean);
bool (*kvm_mips_is_error_pfn)(kvm_pfn_t pfn);
-EXPORT_SYMBOL(kvm_mips_is_error_pfn);
+EXPORT_SYMBOL_GPL(kvm_mips_is_error_pfn);
uint32_t kvm_mips_get_kernel_asid(struct kvm_vcpu *vcpu)
{
@@ -111,7 +111,7 @@ void kvm_mips_dump_host_tlbs(void)
mtc0_tlbw_hazard();
local_irq_restore(flags);
}
-EXPORT_SYMBOL(kvm_mips_dump_host_tlbs);
+EXPORT_SYMBOL_GPL(kvm_mips_dump_host_tlbs);
void kvm_mips_dump_guest_tlbs(struct kvm_vcpu *vcpu)
{
@@ -139,7 +139,7 @@ void kvm_mips_dump_guest_tlbs(struct kvm_vcpu *vcpu)
(tlb.tlb_lo1 >> 3) & 7, tlb.tlb_mask);
}
}
-EXPORT_SYMBOL(kvm_mips_dump_guest_tlbs);
+EXPORT_SYMBOL_GPL(kvm_mips_dump_guest_tlbs);
static int kvm_mips_map_page(struct kvm *kvm, gfn_t gfn)
{
@@ -191,7 +191,7 @@ unsigned long kvm_mips_translate_guest_kseg0_to_hpa(struct kvm_vcpu *vcpu,
return (kvm->arch.guest_pmap[gfn] << PAGE_SHIFT) + offset;
}
-EXPORT_SYMBOL(kvm_mips_translate_guest_kseg0_to_hpa);
+EXPORT_SYMBOL_GPL(kvm_mips_translate_guest_kseg0_to_hpa);
/* XXXKYMA: Must be called with interrupts disabled */
/* set flush_dcache_mask == 0 if no dcache flush required */
@@ -308,7 +308,7 @@ int kvm_mips_handle_kseg0_tlb_fault(unsigned long badvaddr,
return kvm_mips_host_tlb_write(vcpu, entryhi, entrylo0, entrylo1,
flush_dcache_mask);
}
-EXPORT_SYMBOL(kvm_mips_handle_kseg0_tlb_fault);
+EXPORT_SYMBOL_GPL(kvm_mips_handle_kseg0_tlb_fault);
int kvm_mips_handle_commpage_tlb_fault(unsigned long badvaddr,
struct kvm_vcpu *vcpu)
@@ -351,7 +351,7 @@ int kvm_mips_handle_commpage_tlb_fault(unsigned long badvaddr,
return 0;
}
-EXPORT_SYMBOL(kvm_mips_handle_commpage_tlb_fault);
+EXPORT_SYMBOL_GPL(kvm_mips_handle_commpage_tlb_fault);
int kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu,
struct kvm_mips_tlb *tlb,
@@ -401,7 +401,7 @@ int kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu,
return kvm_mips_host_tlb_write(vcpu, entryhi, entrylo0, entrylo1,
tlb->tlb_mask);
}
-EXPORT_SYMBOL(kvm_mips_handle_mapped_seg_tlb_fault);
+EXPORT_SYMBOL_GPL(kvm_mips_handle_mapped_seg_tlb_fault);
int kvm_mips_guest_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long entryhi)
{
@@ -422,7 +422,7 @@ int kvm_mips_guest_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long entryhi)
return index;
}
-EXPORT_SYMBOL(kvm_mips_guest_tlb_lookup);
+EXPORT_SYMBOL_GPL(kvm_mips_guest_tlb_lookup);
int kvm_mips_host_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long vaddr)
{
@@ -458,7 +458,7 @@ int kvm_mips_host_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long vaddr)
return idx;
}
-EXPORT_SYMBOL(kvm_mips_host_tlb_lookup);
+EXPORT_SYMBOL_GPL(kvm_mips_host_tlb_lookup);
int kvm_mips_host_tlb_inv(struct kvm_vcpu *vcpu, unsigned long va)
{
@@ -505,44 +505,7 @@ int kvm_mips_host_tlb_inv(struct kvm_vcpu *vcpu, unsigned long va)
return 0;
}
-EXPORT_SYMBOL(kvm_mips_host_tlb_inv);
-
-/* XXXKYMA: Fix Guest USER/KERNEL no longer share the same ASID */
-int kvm_mips_host_tlb_inv_index(struct kvm_vcpu *vcpu, int index)
-{
- unsigned long flags, old_entryhi;
-
- if (index >= current_cpu_data.tlbsize)
- BUG();
-
- local_irq_save(flags);
-
- old_entryhi = read_c0_entryhi();
-
- write_c0_entryhi(UNIQUE_ENTRYHI(index));
- mtc0_tlbw_hazard();
-
- write_c0_index(index);
- mtc0_tlbw_hazard();
-
- write_c0_entrylo0(0);
- mtc0_tlbw_hazard();
-
- write_c0_entrylo1(0);
- mtc0_tlbw_hazard();
-
- tlb_write_indexed();
- mtc0_tlbw_hazard();
- tlbw_use_hazard();
-
- write_c0_entryhi(old_entryhi);
- mtc0_tlbw_hazard();
- tlbw_use_hazard();
-
- local_irq_restore(flags);
-
- return 0;
-}
+EXPORT_SYMBOL_GPL(kvm_mips_host_tlb_inv);
void kvm_mips_flush_host_tlb(int skip_kseg0)
{
@@ -594,7 +557,7 @@ void kvm_mips_flush_host_tlb(int skip_kseg0)
local_irq_restore(flags);
}
-EXPORT_SYMBOL(kvm_mips_flush_host_tlb);
+EXPORT_SYMBOL_GPL(kvm_mips_flush_host_tlb);
void kvm_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu,
struct kvm_vcpu *vcpu)
@@ -642,7 +605,7 @@ void kvm_local_flush_tlb_all(void)
local_irq_restore(flags);
}
-EXPORT_SYMBOL(kvm_local_flush_tlb_all);
+EXPORT_SYMBOL_GPL(kvm_local_flush_tlb_all);
/**
* kvm_mips_migrate_count() - Migrate timer.
@@ -673,8 +636,8 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
local_irq_save(flags);
- if (((vcpu->arch.
- guest_kernel_asid[cpu] ^ asid_cache(cpu)) & ASID_VERSION_MASK)) {
+ if ((vcpu->arch.guest_kernel_asid[cpu] ^ asid_cache(cpu)) &
+ ASID_VERSION_MASK) {
kvm_get_new_mmu_context(&vcpu->arch.guest_kernel_mm, cpu, vcpu);
vcpu->arch.guest_kernel_asid[cpu] =
vcpu->arch.guest_kernel_mm.context.asid[cpu];
@@ -739,7 +702,7 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
local_irq_restore(flags);
}
-EXPORT_SYMBOL(kvm_arch_vcpu_load);
+EXPORT_SYMBOL_GPL(kvm_arch_vcpu_load);
/* ASID can change if another task is scheduled during preemption */
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
@@ -768,7 +731,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
local_irq_restore(flags);
}
-EXPORT_SYMBOL(kvm_arch_vcpu_put);
+EXPORT_SYMBOL_GPL(kvm_arch_vcpu_put);
uint32_t kvm_get_inst(uint32_t *opc, struct kvm_vcpu *vcpu)
{
@@ -813,4 +776,4 @@ uint32_t kvm_get_inst(uint32_t *opc, struct kvm_vcpu *vcpu)
return inst;
}
-EXPORT_SYMBOL(kvm_get_inst);
+EXPORT_SYMBOL_GPL(kvm_get_inst);
diff --git a/arch/mips/kvm/trap_emul.c b/arch/mips/kvm/trap_emul.c
index d836ed5b0bc7..ad988000563f 100644
--- a/arch/mips/kvm/trap_emul.c
+++ b/arch/mips/kvm/trap_emul.c
@@ -16,7 +16,6 @@
#include <linux/kvm_host.h>
-#include "opcode.h"
#include "interrupt.h"
static gpa_t kvm_trap_emul_gva_to_gpa_cb(gva_t gva)
diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c
index 272af8ac2425..5530070e0d05 100644
--- a/arch/mips/lib/mips-atomic.c
+++ b/arch/mips/lib/mips-atomic.c
@@ -57,7 +57,6 @@ notrace void arch_local_irq_disable(void)
}
EXPORT_SYMBOL(arch_local_irq_disable);
-
notrace unsigned long arch_local_irq_save(void)
{
unsigned long flags;
@@ -111,31 +110,4 @@ notrace void arch_local_irq_restore(unsigned long flags)
}
EXPORT_SYMBOL(arch_local_irq_restore);
-
-notrace void __arch_local_irq_restore(unsigned long flags)
-{
- unsigned long __tmp1;
-
- preempt_disable();
-
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " .set noat \n"
- " mfc0 $1, $12 \n"
- " andi %[flags], 1 \n"
- " ori $1, 0x1f \n"
- " xori $1, 0x1f \n"
- " or %[flags], $1 \n"
- " mtc0 %[flags], $12 \n"
- " " __stringify(__irq_disable_hazard) " \n"
- " .set pop \n"
- : [flags] "=r" (__tmp1)
- : "0" (flags)
- : "memory");
-
- preempt_enable();
-}
-EXPORT_SYMBOL(__arch_local_irq_restore);
-
-#endif /* !CONFIG_CPU_MIPSR2 */
+#endif /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR6 */
diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform
index 2e48e83d5524..85d808924c94 100644
--- a/arch/mips/loongson64/Platform
+++ b/arch/mips/loongson64/Platform
@@ -22,6 +22,27 @@ ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
endif
endif
+cflags-$(CONFIG_CPU_LOONGSON3) += -Wa,--trap
+#
+# binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a
+# as MIPS64 R2; older versions as just R1. This leaves the possibility open
+# that GCC might generate R2 code for -march=loongson3a which then is rejected
+# by GAS. The cc-option can't probe for this behaviour so -march=loongson3a
+# can't easily be used safely within the kbuild framework.
+#
+ifeq ($(call cc-ifversion, -ge, 0409, y), y)
+ ifeq ($(call ld-ifversion, -ge, 22500000, y), y)
+ cflags-$(CONFIG_CPU_LOONGSON3) += \
+ $(call cc-option,-march=loongson3a -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64)
+ else
+ cflags-$(CONFIG_CPU_LOONGSON3) += \
+ $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64)
+ endif
+else
+ cflags-$(CONFIG_CPU_LOONGSON3) += \
+ $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64)
+endif
+
#
# Loongson Machines' Support
#
diff --git a/arch/mips/loongson64/loongson-3/hpet.c b/arch/mips/loongson64/loongson-3/hpet.c
index bf9f1a77f0e5..a2631a52ca99 100644
--- a/arch/mips/loongson64/loongson-3/hpet.c
+++ b/arch/mips/loongson64/loongson-3/hpet.c
@@ -13,6 +13,9 @@
#define SMBUS_PCI_REG64 0x64
#define SMBUS_PCI_REGB4 0xb4
+#define HPET_MIN_CYCLES 64
+#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
+
static DEFINE_SPINLOCK(hpet_lock);
DEFINE_PER_CPU(struct clock_event_device, hpet_clockevent_device);
@@ -161,8 +164,9 @@ static int hpet_next_event(unsigned long delta,
cnt += delta;
hpet_write(HPET_T0_CMP, cnt);
- res = ((int)(hpet_read(HPET_COUNTER) - cnt) > 0) ? -ETIME : 0;
- return res;
+ res = (int)(cnt - hpet_read(HPET_COUNTER));
+
+ return res < HPET_MIN_CYCLES ? -ETIME : 0;
}
static irqreturn_t hpet_irq_handler(int irq, void *data)
@@ -237,7 +241,7 @@ void __init setup_hpet_timer(void)
cd->cpumask = cpumask_of(cpu);
clockevent_set_clock(cd, HPET_FREQ);
cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
- cd->min_delta_ns = 5000;
+ cd->min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA, cd);
clockevents_register_device(cd);
setup_irq(HPET_T0_IRQ, &hpet_irq);
diff --git a/arch/mips/loongson64/loongson-3/smp.c b/arch/mips/loongson64/loongson-3/smp.c
index 1a4738a8f2d3..509832a9836c 100644
--- a/arch/mips/loongson64/loongson-3/smp.c
+++ b/arch/mips/loongson64/loongson-3/smp.c
@@ -30,13 +30,13 @@
#include "smp.h"
DEFINE_PER_CPU(int, cpu_state);
-DEFINE_PER_CPU(uint32_t, core0_c0count);
static void *ipi_set0_regs[16];
static void *ipi_clear0_regs[16];
static void *ipi_status0_regs[16];
static void *ipi_en0_regs[16];
static void *ipi_mailbox_buf[16];
+static uint32_t core0_c0count[NR_CPUS];
/* read a 32bit value from ipi register */
#define loongson3_ipi_read32(addr) readl(addr)
@@ -275,12 +275,14 @@ void loongson3_ipi_interrupt(struct pt_regs *regs)
if (action & SMP_ASK_C0COUNT) {
BUG_ON(cpu != 0);
c0count = read_c0_count();
- for (i = 1; i < num_possible_cpus(); i++)
- per_cpu(core0_c0count, i) = c0count;
+ c0count = c0count ? c0count : 1;
+ for (i = 1; i < nr_cpu_ids; i++)
+ core0_c0count[i] = c0count;
+ __wbflush(); /* Let others see the result ASAP */
}
}
-#define MAX_LOOPS 1111
+#define MAX_LOOPS 800
/*
* SMP init and finish on secondary CPUs
*/
@@ -305,16 +307,20 @@ static void loongson3_init_secondary(void)
cpu_logical_map(cpu) / loongson_sysconf.cores_per_package;
i = 0;
- __this_cpu_write(core0_c0count, 0);
+ core0_c0count[cpu] = 0;
loongson3_send_ipi_single(0, SMP_ASK_C0COUNT);
- while (!__this_cpu_read(core0_c0count)) {
+ while (!core0_c0count[cpu]) {
i++;
cpu_relax();
}
if (i > MAX_LOOPS)
i = MAX_LOOPS;
- initcount = __this_cpu_read(core0_c0count) + i;
+ if (cpu_data[cpu].package)
+ initcount = core0_c0count[cpu] + i;
+ else /* Local access is faster for loops */
+ initcount = core0_c0count[cpu] + i/2;
+
write_c0_count(initcount);
}
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 32f0e19a0d7f..cdfd44ffa51c 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -1266,6 +1266,8 @@ branch_common:
*/
sig = mips_dsemul(xcp, ir,
contpc);
+ if (sig < 0)
+ break;
if (sig)
xcp->cp0_epc = bcpc;
/*
@@ -1319,6 +1321,8 @@ branch_common:
* instruction in the dslot
*/
sig = mips_dsemul(xcp, ir, contpc);
+ if (sig < 0)
+ break;
if (sig)
xcp->cp0_epc = bcpc;
/* SIGILL forces out of the emulation loop. */
diff --git a/arch/mips/math-emu/dp_simple.c b/arch/mips/math-emu/dp_simple.c
index 926d56bf37f2..eb96485ed939 100644
--- a/arch/mips/math-emu/dp_simple.c
+++ b/arch/mips/math-emu/dp_simple.c
@@ -23,27 +23,39 @@
union ieee754dp ieee754dp_neg(union ieee754dp x)
{
- unsigned int oldrm;
union ieee754dp y;
- oldrm = ieee754_csr.rm;
- ieee754_csr.rm = FPU_CSR_RD;
- y = ieee754dp_sub(ieee754dp_zero(0), x);
- ieee754_csr.rm = oldrm;
+ if (ieee754_csr.abs2008) {
+ y = x;
+ DPSIGN(y) = !DPSIGN(x);
+ } else {
+ unsigned int oldrm;
+
+ oldrm = ieee754_csr.rm;
+ ieee754_csr.rm = FPU_CSR_RD;
+ y = ieee754dp_sub(ieee754dp_zero(0), x);
+ ieee754_csr.rm = oldrm;
+ }
return y;
}
union ieee754dp ieee754dp_abs(union ieee754dp x)
{
- unsigned int oldrm;
union ieee754dp y;
- oldrm = ieee754_csr.rm;
- ieee754_csr.rm = FPU_CSR_RD;
- if (DPSIGN(x))
- y = ieee754dp_sub(ieee754dp_zero(0), x);
- else
- y = ieee754dp_add(ieee754dp_zero(0), x);
- ieee754_csr.rm = oldrm;
+ if (ieee754_csr.abs2008) {
+ y = x;
+ DPSIGN(y) = 0;
+ } else {
+ unsigned int oldrm;
+
+ oldrm = ieee754_csr.rm;
+ ieee754_csr.rm = FPU_CSR_RD;
+ if (DPSIGN(x))
+ y = ieee754dp_sub(ieee754dp_zero(0), x);
+ else
+ y = ieee754dp_add(ieee754dp_zero(0), x);
+ ieee754_csr.rm = oldrm;
+ }
return y;
}
diff --git a/arch/mips/math-emu/dp_tint.c b/arch/mips/math-emu/dp_tint.c
index 6ffc336c530e..f3985617ce31 100644
--- a/arch/mips/math-emu/dp_tint.c
+++ b/arch/mips/math-emu/dp_tint.c
@@ -38,10 +38,13 @@ int ieee754dp_tint(union ieee754dp x)
switch (xc) {
case IEEE754_CLASS_SNAN:
case IEEE754_CLASS_QNAN:
- case IEEE754_CLASS_INF:
ieee754_setcx(IEEE754_INVALID_OPERATION);
return ieee754si_indef();
+ case IEEE754_CLASS_INF:
+ ieee754_setcx(IEEE754_INVALID_OPERATION);
+ return ieee754si_overflow(xs);
+
case IEEE754_CLASS_ZERO:
return 0;
@@ -53,7 +56,7 @@ int ieee754dp_tint(union ieee754dp x)
/* Set invalid. We will only use overflow for floating
point overflow */
ieee754_setcx(IEEE754_INVALID_OPERATION);
- return ieee754si_indef();
+ return ieee754si_overflow(xs);
}
/* oh gawd */
if (xe > DP_FBITS) {
@@ -93,7 +96,7 @@ int ieee754dp_tint(union ieee754dp x)
if ((xm >> 31) != 0 && (xs == 0 || xm != 0x80000000)) {
/* This can happen after rounding */
ieee754_setcx(IEEE754_INVALID_OPERATION);
- return ieee754si_indef();
+ return ieee754si_overflow(xs);
}
if (round || sticky)
ieee754_setcx(IEEE754_INEXACT);
diff --git a/arch/mips/math-emu/dp_tlong.c b/arch/mips/math-emu/dp_tlong.c
index 9cdc145b75e0..748fa10ed4cf 100644
--- a/arch/mips/math-emu/dp_tlong.c
+++ b/arch/mips/math-emu/dp_tlong.c
@@ -38,10 +38,13 @@ s64 ieee754dp_tlong(union ieee754dp x)
switch (xc) {
case IEEE754_CLASS_SNAN:
case IEEE754_CLASS_QNAN:
- case IEEE754_CLASS_INF:
ieee754_setcx(IEEE754_INVALID_OPERATION);
return ieee754di_indef();
+ case IEEE754_CLASS_INF:
+ ieee754_setcx(IEEE754_INVALID_OPERATION);
+ return ieee754di_overflow(xs);
+
case IEEE754_CLASS_ZERO:
return 0;
@@ -56,7 +59,7 @@ s64 ieee754dp_tlong(union ieee754dp x)
/* Set invalid. We will only use overflow for floating
point overflow */
ieee754_setcx(IEEE754_INVALID_OPERATION);
- return ieee754di_indef();
+ return ieee754di_overflow(xs);
}
/* oh gawd */
if (xe > DP_FBITS) {
@@ -97,7 +100,7 @@ s64 ieee754dp_tlong(union ieee754dp x)
if ((xm >> 63) != 0) {
/* This can happen after rounding */
ieee754_setcx(IEEE754_INVALID_OPERATION);
- return ieee754di_indef();
+ return ieee754di_overflow(xs);
}
if (round || sticky)
ieee754_setcx(IEEE754_INEXACT);
diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c
index cbb36c14b155..46b964d2b79c 100644
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -31,17 +31,41 @@ struct emuframe {
unsigned long epc;
};
+/*
+ * Set up an emulation frame for instruction IR, from a delay slot of
+ * a branch jumping to CPC. Return 0 if successful, -1 if no emulation
+ * required, otherwise a signal number causing a frame setup failure.
+ */
int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
{
+ int isa16 = get_isa16_mode(regs->cp0_epc);
+ mips_instruction break_math;
struct emuframe __user *fr;
int err;
- if ((get_isa16_mode(regs->cp0_epc) && ((ir >> 16) == MM_NOP16)) ||
- (ir == 0)) {
- /* NOP is easy */
- regs->cp0_epc = cpc;
- clear_delay_slot(regs);
- return 0;
+ /* NOP is easy */
+ if (ir == 0)
+ return -1;
+
+ /* microMIPS instructions */
+ if (isa16) {
+ union mips_instruction insn = { .word = ir };
+
+ /* NOP16 aka MOVE16 $0, $0 */
+ if ((ir >> 16) == MM_NOP16)
+ return -1;
+
+ /* ADDIUPC */
+ if (insn.mm_a_format.opcode == mm_addiupc_op) {
+ unsigned int rs;
+ s32 v;
+
+ rs = (((insn.mm_a_format.rs + 0x1e) & 0xf) + 2);
+ v = regs->cp0_epc & ~3;
+ v += insn.mm_a_format.simmediate << 2;
+ regs->regs[rs] = (long)v;
+ return -1;
+ }
}
pr_debug("dsemul %lx %lx\n", regs->cp0_epc, cpc);
@@ -55,14 +79,10 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
* Algorithmics used a system call instruction, and
* borrowed that vector. MIPS/Linux version is a bit
* more heavyweight in the interests of portability and
- * multiprocessor support. For Linux we generate a
- * an unaligned access and force an address error exception.
- *
- * For embedded systems (stand-alone) we prefer to use a
- * non-existing CP1 instruction. This prevents us from emulating
- * branches, but gives us a cleaner interface to the exception
- * handler (single entry point).
+ * multiprocessor support. For Linux we use a BREAK 514
+ * instruction causing a breakpoint exception.
*/
+ break_math = BREAK_MATH(isa16);
/* Ensure that the two instructions are in the same cache line */
fr = (struct emuframe __user *)
@@ -72,14 +92,18 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
if (unlikely(!access_ok(VERIFY_WRITE, fr, sizeof(struct emuframe))))
return SIGBUS;
- if (get_isa16_mode(regs->cp0_epc)) {
- err = __put_user(ir >> 16, (u16 __user *)(&fr->emul));
- err |= __put_user(ir & 0xffff, (u16 __user *)((long)(&fr->emul) + 2));
- err |= __put_user(BREAK_MATH >> 16, (u16 __user *)(&fr->badinst));
- err |= __put_user(BREAK_MATH & 0xffff, (u16 __user *)((long)(&fr->badinst) + 2));
+ if (isa16) {
+ err = __put_user(ir >> 16,
+ (u16 __user *)(&fr->emul));
+ err |= __put_user(ir & 0xffff,
+ (u16 __user *)((long)(&fr->emul) + 2));
+ err |= __put_user(break_math >> 16,
+ (u16 __user *)(&fr->badinst));
+ err |= __put_user(break_math & 0xffff,
+ (u16 __user *)((long)(&fr->badinst) + 2));
} else {
err = __put_user(ir, &fr->emul);
- err |= __put_user((mips_instruction)BREAK_MATH, &fr->badinst);
+ err |= __put_user(break_math, &fr->badinst);
}
err |= __put_user((mips_instruction)BD_COOKIE, &fr->cookie);
@@ -90,8 +114,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
return SIGBUS;
}
- regs->cp0_epc = ((unsigned long) &fr->emul) |
- get_isa16_mode(regs->cp0_epc);
+ regs->cp0_epc = (unsigned long)&fr->emul | isa16;
flush_cache_sigtramp((unsigned long)&fr->emul);
@@ -100,6 +123,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
int do_dsemulret(struct pt_regs *xcp)
{
+ int isa16 = get_isa16_mode(xcp->cp0_epc);
struct emuframe __user *fr;
unsigned long epc;
u32 insn, cookie;
@@ -122,16 +146,19 @@ int do_dsemulret(struct pt_regs *xcp)
* - Is the instruction pointed to by the EPC an BREAK_MATH?
* - Is the following memory word the BD_COOKIE?
*/
- if (get_isa16_mode(xcp->cp0_epc)) {
- err = __get_user(instr[0], (u16 __user *)(&fr->badinst));
- err |= __get_user(instr[1], (u16 __user *)((long)(&fr->badinst) + 2));
+ if (isa16) {
+ err = __get_user(instr[0],
+ (u16 __user *)(&fr->badinst));
+ err |= __get_user(instr[1],
+ (u16 __user *)((long)(&fr->badinst) + 2));
insn = (instr[0] << 16) | instr[1];
} else {
err = __get_user(insn, &fr->badinst);
}
err |= __get_user(cookie, &fr->cookie);
- if (unlikely(err || (insn != BREAK_MATH) || (cookie != BD_COOKIE))) {
+ if (unlikely(err ||
+ insn != BREAK_MATH(isa16) || cookie != BD_COOKIE)) {
MIPS_FPU_EMU_INC_STATS(errors);
return 0;
}
diff --git a/arch/mips/math-emu/ieee754.c b/arch/mips/math-emu/ieee754.c
index 8e97acbbe22c..e16ae7b75dbb 100644
--- a/arch/mips/math-emu/ieee754.c
+++ b/arch/mips/math-emu/ieee754.c
@@ -59,7 +59,8 @@ const union ieee754dp __ieee754dp_spcvals[] = {
DPCNST(1, 3, 0x4000000000000ULL), /* - 10.0 */
DPCNST(0, DP_EMAX + 1, 0x0000000000000ULL), /* + infinity */
DPCNST(1, DP_EMAX + 1, 0x0000000000000ULL), /* - infinity */
- DPCNST(0, DP_EMAX + 1, 0x7FFFFFFFFFFFFULL), /* + indef quiet Nan */
+ DPCNST(0, DP_EMAX + 1, 0x7FFFFFFFFFFFFULL), /* + ind legacy qNaN */
+ DPCNST(0, DP_EMAX + 1, 0x8000000000000ULL), /* + indef 2008 qNaN */
DPCNST(0, DP_EMAX, 0xFFFFFFFFFFFFFULL), /* + max */
DPCNST(1, DP_EMAX, 0xFFFFFFFFFFFFFULL), /* - max */
DPCNST(0, DP_EMIN, 0x0000000000000ULL), /* + min normal */
@@ -82,7 +83,8 @@ const union ieee754sp __ieee754sp_spcvals[] = {
SPCNST(1, 3, 0x200000), /* - 10.0 */
SPCNST(0, SP_EMAX + 1, 0x000000), /* + infinity */
SPCNST(1, SP_EMAX + 1, 0x000000), /* - infinity */
- SPCNST(0, SP_EMAX + 1, 0x3FFFFF), /* + indef quiet Nan */
+ SPCNST(0, SP_EMAX + 1, 0x3FFFFF), /* + indef legacy quiet NaN */
+ SPCNST(0, SP_EMAX + 1, 0x400000), /* + indef 2008 quiet NaN */
SPCNST(0, SP_EMAX, 0x7FFFFF), /* + max normal */
SPCNST(1, SP_EMAX, 0x7FFFFF), /* - max normal */
SPCNST(0, SP_EMIN, 0x000000), /* + min normal */
diff --git a/arch/mips/math-emu/ieee754.h b/arch/mips/math-emu/ieee754.h
index df94720714c7..d3be351aed15 100644
--- a/arch/mips/math-emu/ieee754.h
+++ b/arch/mips/math-emu/ieee754.h
@@ -221,15 +221,16 @@ union ieee754dp ieee754dp_dump(char *s, union ieee754dp x);
#define IEEE754_SPCVAL_NTEN 5 /* -10.0 */
#define IEEE754_SPCVAL_PINFINITY 6 /* +inf */
#define IEEE754_SPCVAL_NINFINITY 7 /* -inf */
-#define IEEE754_SPCVAL_INDEF 8 /* quiet NaN */
-#define IEEE754_SPCVAL_PMAX 9 /* +max norm */
-#define IEEE754_SPCVAL_NMAX 10 /* -max norm */
-#define IEEE754_SPCVAL_PMIN 11 /* +min norm */
-#define IEEE754_SPCVAL_NMIN 12 /* -min norm */
-#define IEEE754_SPCVAL_PMIND 13 /* +min denorm */
-#define IEEE754_SPCVAL_NMIND 14 /* -min denorm */
-#define IEEE754_SPCVAL_P1E31 15 /* + 1.0e31 */
-#define IEEE754_SPCVAL_P1E63 16 /* + 1.0e63 */
+#define IEEE754_SPCVAL_INDEF_LEG 8 /* legacy quiet NaN */
+#define IEEE754_SPCVAL_INDEF_2008 9 /* IEEE 754-2008 quiet NaN */
+#define IEEE754_SPCVAL_PMAX 10 /* +max norm */
+#define IEEE754_SPCVAL_NMAX 11 /* -max norm */
+#define IEEE754_SPCVAL_PMIN 12 /* +min norm */
+#define IEEE754_SPCVAL_NMIN 13 /* -min norm */
+#define IEEE754_SPCVAL_PMIND 14 /* +min denorm */
+#define IEEE754_SPCVAL_NMIND 15 /* -min denorm */
+#define IEEE754_SPCVAL_P1E31 16 /* + 1.0e31 */
+#define IEEE754_SPCVAL_P1E63 17 /* + 1.0e63 */
extern const union ieee754dp __ieee754dp_spcvals[];
extern const union ieee754sp __ieee754sp_spcvals[];
@@ -243,7 +244,8 @@ extern const union ieee754sp __ieee754sp_spcvals[];
#define ieee754dp_zero(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
#define ieee754dp_one(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
#define ieee754dp_ten(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
-#define ieee754dp_indef() (ieee754dp_spcvals[IEEE754_SPCVAL_INDEF])
+#define ieee754dp_indef() (ieee754dp_spcvals[IEEE754_SPCVAL_INDEF_LEG + \
+ ieee754_csr.nan2008])
#define ieee754dp_max(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
#define ieee754dp_min(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
#define ieee754dp_mind(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
@@ -254,7 +256,8 @@ extern const union ieee754sp __ieee754sp_spcvals[];
#define ieee754sp_zero(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
#define ieee754sp_one(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
#define ieee754sp_ten(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
-#define ieee754sp_indef() (ieee754sp_spcvals[IEEE754_SPCVAL_INDEF])
+#define ieee754sp_indef() (ieee754sp_spcvals[IEEE754_SPCVAL_INDEF_LEG + \
+ ieee754_csr.nan2008])
#define ieee754sp_max(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
#define ieee754sp_min(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
#define ieee754sp_mind(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
@@ -266,12 +269,25 @@ extern const union ieee754sp __ieee754sp_spcvals[];
*/
static inline int ieee754si_indef(void)
{
- return INT_MAX;
+ return ieee754_csr.nan2008 ? 0 : INT_MAX;
}
static inline s64 ieee754di_indef(void)
{
- return S64_MAX;
+ return ieee754_csr.nan2008 ? 0 : S64_MAX;
+}
+
+/*
+ * Overflow integer value
+ */
+static inline int ieee754si_overflow(int xs)
+{
+ return ieee754_csr.nan2008 && xs ? INT_MIN : INT_MAX;
+}
+
+static inline s64 ieee754di_overflow(int xs)
+{
+ return ieee754_csr.nan2008 && xs ? S64_MIN : S64_MAX;
}
/* result types for xctx.rt */
diff --git a/arch/mips/math-emu/ieee754dp.c b/arch/mips/math-emu/ieee754dp.c
index 522d843f2ffd..ad3c73436777 100644
--- a/arch/mips/math-emu/ieee754dp.c
+++ b/arch/mips/math-emu/ieee754dp.c
@@ -37,8 +37,11 @@ static inline int ieee754dp_isnan(union ieee754dp x)
static inline int ieee754dp_issnan(union ieee754dp x)
{
+ int qbit;
+
assert(ieee754dp_isnan(x));
- return (DPMANT(x) & DP_MBIT(DP_FBITS - 1)) == DP_MBIT(DP_FBITS - 1);
+ qbit = (DPMANT(x) & DP_MBIT(DP_FBITS - 1)) == DP_MBIT(DP_FBITS - 1);
+ return ieee754_csr.nan2008 ^ qbit;
}
@@ -51,7 +54,12 @@ union ieee754dp __cold ieee754dp_nanxcpt(union ieee754dp r)
assert(ieee754dp_issnan(r));
ieee754_setcx(IEEE754_INVALID_OPERATION);
- return ieee754dp_indef();
+ if (ieee754_csr.nan2008)
+ DPMANT(r) |= DP_MBIT(DP_FBITS - 1);
+ else
+ r = ieee754dp_indef();
+
+ return r;
}
static u64 ieee754dp_get_rounding(int sn, u64 xm)
diff --git a/arch/mips/math-emu/ieee754int.h b/arch/mips/math-emu/ieee754int.h
index 6383e2c5c1ad..ed7bb277b3e0 100644
--- a/arch/mips/math-emu/ieee754int.h
+++ b/arch/mips/math-emu/ieee754int.h
@@ -63,10 +63,10 @@ static inline int ieee754_class_nan(int xc)
if (ve == SP_EMAX+1+SP_EBIAS) { \
if (vm == 0) \
vc = IEEE754_CLASS_INF; \
- else if (vm & SP_MBIT(SP_FBITS-1)) \
- vc = IEEE754_CLASS_SNAN; \
- else \
+ else if (ieee754_csr.nan2008 ^ !(vm & SP_MBIT(SP_FBITS - 1))) \
vc = IEEE754_CLASS_QNAN; \
+ else \
+ vc = IEEE754_CLASS_SNAN; \
} else if (ve == SP_EMIN-1+SP_EBIAS) { \
if (vm) { \
ve = SP_EMIN; \
@@ -97,10 +97,10 @@ static inline int ieee754_class_nan(int xc)
if (ve == DP_EMAX+1+DP_EBIAS) { \
if (vm == 0) \
vc = IEEE754_CLASS_INF; \
- else if (vm & DP_MBIT(DP_FBITS-1)) \
- vc = IEEE754_CLASS_SNAN; \
- else \
+ else if (ieee754_csr.nan2008 ^ !(vm & DP_MBIT(DP_FBITS - 1))) \
vc = IEEE754_CLASS_QNAN; \
+ else \
+ vc = IEEE754_CLASS_SNAN; \
} else if (ve == DP_EMIN-1+DP_EBIAS) { \
if (vm) { \
ve = DP_EMIN; \
diff --git a/arch/mips/math-emu/ieee754sp.c b/arch/mips/math-emu/ieee754sp.c
index ca8e35e33bf7..def00ffc50fc 100644
--- a/arch/mips/math-emu/ieee754sp.c
+++ b/arch/mips/math-emu/ieee754sp.c
@@ -37,8 +37,11 @@ static inline int ieee754sp_isnan(union ieee754sp x)
static inline int ieee754sp_issnan(union ieee754sp x)
{
+ int qbit;
+
assert(ieee754sp_isnan(x));
- return SPMANT(x) & SP_MBIT(SP_FBITS - 1);
+ qbit = (SPMANT(x) & SP_MBIT(SP_FBITS - 1)) == SP_MBIT(SP_FBITS - 1);
+ return ieee754_csr.nan2008 ^ qbit;
}
@@ -51,7 +54,12 @@ union ieee754sp __cold ieee754sp_nanxcpt(union ieee754sp r)
assert(ieee754sp_issnan(r));
ieee754_setcx(IEEE754_INVALID_OPERATION);
- return ieee754sp_indef();
+ if (ieee754_csr.nan2008)
+ SPMANT(r) |= SP_MBIT(SP_FBITS - 1);
+ else
+ r = ieee754sp_indef();
+
+ return r;
}
static unsigned ieee754sp_get_rounding(int sn, unsigned xm)
diff --git a/arch/mips/math-emu/sp_fdp.c b/arch/mips/math-emu/sp_fdp.c
index 3797148893ad..5060e8fdcb0b 100644
--- a/arch/mips/math-emu/sp_fdp.c
+++ b/arch/mips/math-emu/sp_fdp.c
@@ -44,13 +44,16 @@ union ieee754sp ieee754sp_fdp(union ieee754dp x)
switch (xc) {
case IEEE754_CLASS_SNAN:
- return ieee754sp_nanxcpt(ieee754sp_nan_fdp(xs, xm));
-
+ x = ieee754dp_nanxcpt(x);
+ EXPLODEXDP;
+ /* Fall through. */
case IEEE754_CLASS_QNAN:
y = ieee754sp_nan_fdp(xs, xm);
- EXPLODEYSP;
- if (!ieee754_class_nan(yc))
- y = ieee754sp_indef();
+ if (!ieee754_csr.nan2008) {
+ EXPLODEYSP;
+ if (!ieee754_class_nan(yc))
+ y = ieee754sp_indef();
+ }
return y;
case IEEE754_CLASS_INF:
diff --git a/arch/mips/math-emu/sp_simple.c b/arch/mips/math-emu/sp_simple.c
index c50e9451f2d2..756c9cf2dfd2 100644
--- a/arch/mips/math-emu/sp_simple.c
+++ b/arch/mips/math-emu/sp_simple.c
@@ -23,27 +23,39 @@
union ieee754sp ieee754sp_neg(union ieee754sp x)
{
- unsigned int oldrm;
union ieee754sp y;
- oldrm = ieee754_csr.rm;
- ieee754_csr.rm = FPU_CSR_RD;
- y = ieee754sp_sub(ieee754sp_zero(0), x);
- ieee754_csr.rm = oldrm;
+ if (ieee754_csr.abs2008) {
+ y = x;
+ SPSIGN(y) = !SPSIGN(x);
+ } else {
+ unsigned int oldrm;
+
+ oldrm = ieee754_csr.rm;
+ ieee754_csr.rm = FPU_CSR_RD;
+ y = ieee754sp_sub(ieee754sp_zero(0), x);
+ ieee754_csr.rm = oldrm;
+ }
return y;
}
union ieee754sp ieee754sp_abs(union ieee754sp x)
{
- unsigned int oldrm;
union ieee754sp y;
- oldrm = ieee754_csr.rm;
- ieee754_csr.rm = FPU_CSR_RD;
- if (SPSIGN(x))
- y = ieee754sp_sub(ieee754sp_zero(0), x);
- else
- y = ieee754sp_add(ieee754sp_zero(0), x);
- ieee754_csr.rm = oldrm;
+ if (ieee754_csr.abs2008) {
+ y = x;
+ SPSIGN(y) = 0;
+ } else {
+ unsigned int oldrm;
+
+ oldrm = ieee754_csr.rm;
+ ieee754_csr.rm = FPU_CSR_RD;
+ if (SPSIGN(x))
+ y = ieee754sp_sub(ieee754sp_zero(0), x);
+ else
+ y = ieee754sp_add(ieee754sp_zero(0), x);
+ ieee754_csr.rm = oldrm;
+ }
return y;
}
diff --git a/arch/mips/math-emu/sp_tint.c b/arch/mips/math-emu/sp_tint.c
index 091299a31798..f4b4cabfe2e1 100644
--- a/arch/mips/math-emu/sp_tint.c
+++ b/arch/mips/math-emu/sp_tint.c
@@ -38,10 +38,13 @@ int ieee754sp_tint(union ieee754sp x)
switch (xc) {
case IEEE754_CLASS_SNAN:
case IEEE754_CLASS_QNAN:
- case IEEE754_CLASS_INF:
ieee754_setcx(IEEE754_INVALID_OPERATION);
return ieee754si_indef();
+ case IEEE754_CLASS_INF:
+ ieee754_setcx(IEEE754_INVALID_OPERATION);
+ return ieee754si_overflow(xs);
+
case IEEE754_CLASS_ZERO:
return 0;
@@ -56,7 +59,7 @@ int ieee754sp_tint(union ieee754sp x)
/* Set invalid. We will only use overflow for floating
point overflow */
ieee754_setcx(IEEE754_INVALID_OPERATION);
- return ieee754si_indef();
+ return ieee754si_overflow(xs);
}
/* oh gawd */
if (xe > SP_FBITS) {
@@ -97,7 +100,7 @@ int ieee754sp_tint(union ieee754sp x)
if ((xm >> 31) != 0) {
/* This can happen after rounding */
ieee754_setcx(IEEE754_INVALID_OPERATION);
- return ieee754si_indef();
+ return ieee754si_overflow(xs);
}
if (round || sticky)
ieee754_setcx(IEEE754_INEXACT);
diff --git a/arch/mips/math-emu/sp_tlong.c b/arch/mips/math-emu/sp_tlong.c
index 9f3c742c1cea..a2450c7e452a 100644
--- a/arch/mips/math-emu/sp_tlong.c
+++ b/arch/mips/math-emu/sp_tlong.c
@@ -39,10 +39,13 @@ s64 ieee754sp_tlong(union ieee754sp x)
switch (xc) {
case IEEE754_CLASS_SNAN:
case IEEE754_CLASS_QNAN:
- case IEEE754_CLASS_INF:
ieee754_setcx(IEEE754_INVALID_OPERATION);
return ieee754di_indef();
+ case IEEE754_CLASS_INF:
+ ieee754_setcx(IEEE754_INVALID_OPERATION);
+ return ieee754di_overflow(xs);
+
case IEEE754_CLASS_ZERO:
return 0;
@@ -57,7 +60,7 @@ s64 ieee754sp_tlong(union ieee754sp x)
/* Set invalid. We will only use overflow for floating
point overflow */
ieee754_setcx(IEEE754_INVALID_OPERATION);
- return ieee754di_indef();
+ return ieee754di_overflow(xs);
}
/* oh gawd */
if (xe > SP_FBITS) {
@@ -94,7 +97,7 @@ s64 ieee754sp_tlong(union ieee754sp x)
if ((xm >> 63) != 0) {
/* This can happen after rounding */
ieee754_setcx(IEEE754_INVALID_OPERATION);
- return ieee754di_indef();
+ return ieee754di_overflow(xs);
}
if (round || sticky)
ieee754_setcx(IEEE754_INEXACT);
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 482192cc8f2b..5a04b6f5c6fb 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -241,7 +241,7 @@ static void output_pgtable_bits_defines(void)
#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
pr_define("_PAGE_HUGE_SHIFT %d\n", _PAGE_HUGE_SHIFT);
#endif
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
if (cpu_has_rixi) {
#ifdef _PAGE_NO_EXEC_SHIFT
pr_define("_PAGE_NO_EXEC_SHIFT %d\n", _PAGE_NO_EXEC_SHIFT);
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 2eda01e6e08f..139ad1d7ab5e 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o
obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c
new file mode 100644
index 000000000000..a009ee458934
--- /dev/null
+++ b/arch/mips/pci/pci-mt7620.c
@@ -0,0 +1,426 @@
+/*
+ * Ralink MT7620A SoC PCI support
+ *
+ * Copyright (C) 2007-2013 Bruce Chang (Mediatek)
+ * Copyright (C) 2013-2016 John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7620.h>
+
+#define RALINK_PCI_IO_MAP_BASE 0x10160000
+#define RALINK_PCI_MEMORY_BASE 0x0
+
+#define RALINK_INT_PCIE0 4
+
+#define RALINK_CLKCFG1 0x30
+#define RALINK_GPIOMODE 0x60
+
+#define PPLL_CFG1 0x9c
+#define PDRV_SW_SET BIT(23)
+
+#define PPLL_DRV 0xa0
+#define PDRV_SW_SET (1<<31)
+#define LC_CKDRVPD (1<<19)
+#define LC_CKDRVOHZ (1<<18)
+#define LC_CKDRVHZ (1<<17)
+#define LC_CKTEST (1<<16)
+
+/* PCI Bridge registers */
+#define RALINK_PCI_PCICFG_ADDR 0x00
+#define PCIRST BIT(1)
+
+#define RALINK_PCI_PCIENA 0x0C
+#define PCIINT2 BIT(20)
+
+#define RALINK_PCI_CONFIG_ADDR 0x20
+#define RALINK_PCI_CONFIG_DATA_VIRT_REG 0x24
+#define RALINK_PCI_MEMBASE 0x28
+#define RALINK_PCI_IOBASE 0x2C
+
+/* PCI RC registers */
+#define RALINK_PCI0_BAR0SETUP_ADDR 0x10
+#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18
+#define RALINK_PCI0_ID 0x30
+#define RALINK_PCI0_CLASS 0x34
+#define RALINK_PCI0_SUBID 0x38
+#define RALINK_PCI0_STATUS 0x50
+#define PCIE_LINK_UP_ST BIT(0)
+
+#define PCIEPHY0_CFG 0x90
+
+#define RALINK_PCIEPHY_P0_CTL_OFFSET 0x7498
+#define RALINK_PCIE0_CLK_EN (1 << 26)
+
+#define BUSY 0x80000000
+#define WAITRETRY_MAX 10
+#define WRITE_MODE (1UL << 23)
+#define DATA_SHIFT 0
+#define ADDR_SHIFT 8
+
+
+static void __iomem *bridge_base;
+static void __iomem *pcie_base;
+
+static struct reset_control *rstpcie0;
+
+static inline void bridge_w32(u32 val, unsigned reg)
+{
+ iowrite32(val, bridge_base + reg);
+}
+
+static inline u32 bridge_r32(unsigned reg)
+{
+ return ioread32(bridge_base + reg);
+}
+
+static inline void pcie_w32(u32 val, unsigned reg)
+{
+ iowrite32(val, pcie_base + reg);
+}
+
+static inline u32 pcie_r32(unsigned reg)
+{
+ return ioread32(pcie_base + reg);
+}
+
+static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
+{
+ u32 val = pcie_r32(reg);
+
+ val &= ~clr;
+ val |= set;
+ pcie_w32(val, reg);
+}
+
+static int wait_pciephy_busy(void)
+{
+ unsigned long reg_value = 0x0, retry = 0;
+
+ while (1) {
+ reg_value = pcie_r32(PCIEPHY0_CFG);
+
+ if (reg_value & BUSY)
+ mdelay(100);
+ else
+ break;
+ if (retry++ > WAITRETRY_MAX) {
+ printk(KERN_WARN "PCIE-PHY retry failed.\n");
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static void pcie_phy(unsigned long addr, unsigned long val)
+{
+ wait_pciephy_busy();
+ pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT),
+ PCIEPHY0_CFG);
+ mdelay(1);
+ wait_pciephy_busy();
+}
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *val)
+{
+ unsigned int slot = PCI_SLOT(devfn);
+ u8 func = PCI_FUNC(devfn);
+ u32 address;
+ u32 data;
+ u32 num = 0;
+
+ if (bus)
+ num = bus->number;
+
+ address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) |
+ (func << 8) | (where & 0xfc) | 0x80000000;
+ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
+ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
+
+ switch (size) {
+ case 1:
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ break;
+ case 2:
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ break;
+ case 4:
+ *val = data;
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 val)
+{
+ unsigned int slot = PCI_SLOT(devfn);
+ u8 func = PCI_FUNC(devfn);
+ u32 address;
+ u32 data;
+ u32 num = 0;
+
+ if (bus)
+ num = bus->number;
+
+ address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) |
+ (func << 8) | (where & 0xfc) | 0x80000000;
+ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
+ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
+
+ switch (size) {
+ case 1:
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 2:
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 4:
+ data = val;
+ break;
+ }
+
+ bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRT_REG);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops mt7620_pci_ops = {
+ .read = pci_config_read,
+ .write = pci_config_write,
+};
+
+static struct resource mt7620_res_pci_mem1;
+static struct resource mt7620_res_pci_io1;
+struct pci_controller mt7620_controller = {
+ .pci_ops = &mt7620_pci_ops,
+ .mem_resource = &mt7620_res_pci_mem1,
+ .mem_offset = 0x00000000UL,
+ .io_resource = &mt7620_res_pci_io1,
+ .io_offset = 0x00000000UL,
+ .io_map_base = 0xa0000000,
+};
+
+static int mt7620_pci_hw_init(struct platform_device *pdev)
+{
+ /* bypass PCIe DLL */
+ pcie_phy(0x0, 0x80);
+ pcie_phy(0x1, 0x04);
+
+ /* Elastic buffer control */
+ pcie_phy(0x68, 0xB4);
+
+ /* put core into reset */
+ pcie_m32(0, PCIRST, RALINK_PCI_PCICFG_ADDR);
+ reset_control_assert(rstpcie0);
+
+ /* disable power and all clocks */
+ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
+ rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
+
+ /* bring core out of reset */
+ reset_control_deassert(rstpcie0);
+ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
+ mdelay(100);
+
+ if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) {
+ dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
+ reset_control_assert(rstpcie0);
+ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
+ return -1;
+ }
+
+ /* power up the bus */
+ rt_sysc_m32(LC_CKDRVHZ | LC_CKDRVOHZ, LC_CKDRVPD | PDRV_SW_SET,
+ PPLL_DRV);
+
+ return 0;
+}
+
+static int mt7628_pci_hw_init(struct platform_device *pdev)
+{
+ u32 val = 0;
+
+ /* bring the core out of reset */
+ rt_sysc_m32(BIT(16), 0, RALINK_GPIOMODE);
+ reset_control_deassert(rstpcie0);
+
+ /* enable the pci clk */
+ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
+ mdelay(100);
+
+ /* voodoo from the SDK driver */
+ pcie_m32(~0xff, 0x5, RALINK_PCIEPHY_P0_CTL_OFFSET);
+
+ pci_config_read(NULL, 0, 0x70c, 4, &val);
+ val &= ~(0xff) << 8;
+ val |= 0x50 << 8;
+ pci_config_write(NULL, 0, 0x70c, 4, val);
+
+ pci_config_read(NULL, 0, 0x70c, 4, &val);
+ dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val);
+
+ return 0;
+}
+
+static int mt7620_pci_probe(struct platform_device *pdev)
+{
+ struct resource *bridge_res = platform_get_resource(pdev,
+ IORESOURCE_MEM, 0);
+ struct resource *pcie_res = platform_get_resource(pdev,
+ IORESOURCE_MEM, 1);
+ u32 val = 0;
+
+ rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0");
+ if (IS_ERR(rstpcie0))
+ return PTR_ERR(rstpcie0);
+
+ bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res);
+ if (!bridge_base)
+ return -ENOMEM;
+
+ pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res);
+ if (!pcie_base)
+ return -ENOMEM;
+
+ iomem_resource.start = 0;
+ iomem_resource.end = ~0;
+ ioport_resource.start = 0;
+ ioport_resource.end = ~0;
+
+ /* bring up the pci core */
+ switch (ralink_soc) {
+ case MT762X_SOC_MT7620A:
+ if (mt7620_pci_hw_init(pdev))
+ return -1;
+ break;
+
+ case MT762X_SOC_MT7628AN:
+ if (mt7628_pci_hw_init(pdev))
+ return -1;
+ break;
+
+ default:
+ dev_err(&pdev->dev, "pcie is not supported on this hardware\n");
+ return -1;
+ }
+ mdelay(50);
+
+ /* enable write access */
+ pcie_m32(PCIRST, 0, RALINK_PCI_PCICFG_ADDR);
+ mdelay(100);
+
+ /* check if there is a card present */
+ if ((pcie_r32(RALINK_PCI0_STATUS) & PCIE_LINK_UP_ST) == 0) {
+ reset_control_assert(rstpcie0);
+ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
+ if (ralink_soc == MT762X_SOC_MT7620A)
+ rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
+ dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
+ return -1;
+ }
+
+ /* setup ranges */
+ bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
+ bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
+
+ pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
+ pcie_w32(RALINK_PCI_MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
+ pcie_w32(0x06040001, RALINK_PCI0_CLASS);
+
+ /* enable interrupts */
+ pcie_m32(0, PCIINT2, RALINK_PCI_PCIENA);
+
+ /* voodoo from the SDK driver */
+ pci_config_read(NULL, 0, 4, 4, &val);
+ pci_config_write(NULL, 0, 4, 4, val | 0x7);
+
+ pci_load_of_ranges(&mt7620_controller, pdev->dev.of_node);
+ register_pci_controller(&mt7620_controller);
+
+ return 0;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ u16 cmd;
+ u32 val;
+ int irq = 0;
+
+ if ((dev->bus->number == 0) && (slot == 0)) {
+ pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
+ pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4,
+ RALINK_PCI_MEMORY_BASE);
+ pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
+ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
+ irq = RALINK_INT_PCIE0;
+ } else {
+ dev_err(&dev->dev, "no irq found - bus=0x%x, slot = 0x%x\n",
+ dev->bus->number, slot);
+ return 0;
+ }
+ dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n",
+ dev->bus->number, slot, irq);
+
+ /* configure the cache line size to 0x14 */
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14);
+
+ /* configure latency timer to 0xff */
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xff);
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+
+ /* setup the slot */
+ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+
+ return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static const struct of_device_id mt7620_pci_ids[] = {
+ { .compatible = "mediatek,mt7620-pci" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt7620_pci_ids);
+
+static struct platform_driver mt7620_pci_driver = {
+ .probe = mt7620_pci_probe,
+ .driver = {
+ .name = "mt7620-pci",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(mt7620_pci_ids),
+ },
+};
+
+static int __init mt7620_pci_init(void)
+{
+ return platform_driver_register(&mt7620_pci_driver);
+}
+
+arch_initcall(mt7620_pci_init);
diff --git a/arch/mips/pic32/Kconfig b/arch/mips/pic32/Kconfig
new file mode 100644
index 000000000000..fde56a8b85ca
--- /dev/null
+++ b/arch/mips/pic32/Kconfig
@@ -0,0 +1,51 @@
+if MACH_PIC32
+
+choice
+ prompt "Machine Type"
+
+config PIC32MZDA
+ bool "Microchip PIC32MZDA Platform"
+ select BOOT_ELF32
+ select BOOT_RAW
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_MACH_CLKDEV
+ select COMMON_CLK
+ select CLKDEV_LOOKUP
+ select LIBFDT
+ select USE_OF
+ select PINCTRL
+ select PIC32_EVIC
+ help
+ Support for the Microchip PIC32MZDA microcontroller.
+
+ This is a 32-bit microcontroller with support for external or
+ internally packaged DDR2 memory up to 128MB.
+
+ For more information, see <http://www.microchip.com/>.
+
+endchoice
+
+choice
+ prompt "Devicetree selection"
+ default DTB_PIC32_NONE
+ help
+ Select the devicetree.
+
+config DTB_PIC32_NONE
+ bool "None"
+
+config DTB_PIC32_MZDA_SK
+ bool "PIC32MZDA Starter Kit"
+ depends on PIC32MZDA
+ select BUILTIN_DTB
+
+endchoice
+
+endif # MACH_PIC32
diff --git a/arch/mips/pic32/Makefile b/arch/mips/pic32/Makefile
new file mode 100644
index 000000000000..fd357f49ac6c
--- /dev/null
+++ b/arch/mips/pic32/Makefile
@@ -0,0 +1,6 @@
+#
+# Joshua Henderson, <joshua.henderson@microchip.com>
+# Copyright (C) 2015 Microchip Technology, Inc. All rights reserved.
+#
+obj-$(CONFIG_MACH_PIC32) += common/
+obj-$(CONFIG_PIC32MZDA) += pic32mzda/
diff --git a/arch/mips/pic32/Platform b/arch/mips/pic32/Platform
new file mode 100644
index 000000000000..cd2084f44507
--- /dev/null
+++ b/arch/mips/pic32/Platform
@@ -0,0 +1,7 @@
+#
+# PIC32MZDA
+#
+platform-$(CONFIG_PIC32MZDA) += pic32/
+cflags-$(CONFIG_PIC32MZDA) += -I$(srctree)/arch/mips/include/asm/mach-pic32
+load-$(CONFIG_PIC32MZDA) += 0xffffffff88000000
+all-$(CONFIG_PIC32MZDA) := $(COMPRESSION_FNAME).bin
diff --git a/arch/mips/pic32/common/Makefile b/arch/mips/pic32/common/Makefile
new file mode 100644
index 000000000000..be1909cc0467
--- /dev/null
+++ b/arch/mips/pic32/common/Makefile
@@ -0,0 +1,5 @@
+#
+# Joshua Henderson, <joshua.henderson@microchip.com>
+# Copyright (C) 2015 Microchip Technology, Inc. All rights reserved.
+#
+obj-y = reset.o irq.o
diff --git a/arch/mips/pic32/common/irq.c b/arch/mips/pic32/common/irq.c
new file mode 100644
index 000000000000..6df347e36036
--- /dev/null
+++ b/arch/mips/pic32/common/irq.c
@@ -0,0 +1,21 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <asm/irq.h>
+
+void __init arch_init_irq(void)
+{
+ irqchip_init();
+}
diff --git a/arch/mips/pic32/common/reset.c b/arch/mips/pic32/common/reset.c
new file mode 100644
index 000000000000..83345757be5f
--- /dev/null
+++ b/arch/mips/pic32/common/reset.c
@@ -0,0 +1,62 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+#include <asm/mach-pic32/pic32.h>
+
+#define PIC32_RSWRST 0x10
+
+static void pic32_halt(void)
+{
+ while (1) {
+ __asm__(".set push;\n"
+ ".set arch=r4000;\n"
+ "wait;\n"
+ ".set pop;\n"
+ );
+ }
+}
+
+static void pic32_machine_restart(char *command)
+{
+ void __iomem *reg =
+ ioremap(PIC32_BASE_RESET + PIC32_RSWRST, sizeof(u32));
+
+ pic32_syskey_unlock();
+
+ /* magic write/read */
+ __raw_writel(1, reg);
+ (void)__raw_readl(reg);
+
+ pic32_halt();
+}
+
+static void pic32_machine_halt(void)
+{
+ local_irq_disable();
+
+ pic32_halt();
+}
+
+static int __init mips_reboot_setup(void)
+{
+ _machine_restart = pic32_machine_restart;
+ _machine_halt = pic32_machine_halt;
+ pm_power_off = pic32_machine_halt;
+
+ return 0;
+}
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/pic32/pic32mzda/Makefile b/arch/mips/pic32/pic32mzda/Makefile
new file mode 100644
index 000000000000..4a4c2728c027
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/Makefile
@@ -0,0 +1,9 @@
+#
+# Joshua Henderson, <joshua.henderson@microchip.com>
+# Copyright (C) 2015 Microchip Technology, Inc. All rights reserved.
+#
+obj-y := init.o time.o config.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early_console.o \
+ early_pin.o \
+ early_clk.o
diff --git a/arch/mips/pic32/pic32mzda/config.c b/arch/mips/pic32/pic32mzda/config.c
new file mode 100644
index 000000000000..fe293a070003
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/config.c
@@ -0,0 +1,126 @@
+/*
+ * Purna Chandra Mandal, purna.mandal@microchip.com
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach-pic32/pic32.h>
+
+#include "pic32mzda.h"
+
+#define PIC32_CFGCON 0x0000
+#define PIC32_DEVID 0x0020
+#define PIC32_SYSKEY 0x0030
+#define PIC32_CFGEBIA 0x00c0
+#define PIC32_CFGEBIC 0x00d0
+#define PIC32_CFGCON2 0x00f0
+#define PIC32_RCON 0x1240
+
+static void __iomem *pic32_conf_base;
+static DEFINE_SPINLOCK(config_lock);
+static u32 pic32_reset_status;
+
+static u32 pic32_conf_get_reg_field(u32 offset, u32 rshift, u32 mask)
+{
+ u32 v;
+
+ v = readl(pic32_conf_base + offset);
+ v >>= rshift;
+ v &= mask;
+
+ return v;
+}
+
+static u32 pic32_conf_modify_atomic(u32 offset, u32 mask, u32 set)
+{
+ u32 v;
+ unsigned long flags;
+
+ spin_lock_irqsave(&config_lock, flags);
+ v = readl(pic32_conf_base + offset);
+ v &= ~mask;
+ v |= (set & mask);
+ writel(v, pic32_conf_base + offset);
+ spin_unlock_irqrestore(&config_lock, flags);
+
+ return 0;
+}
+
+int pic32_enable_lcd(void)
+{
+ return pic32_conf_modify_atomic(PIC32_CFGCON2, BIT(31), BIT(31));
+}
+
+int pic32_disable_lcd(void)
+{
+ return pic32_conf_modify_atomic(PIC32_CFGCON2, BIT(31), 0);
+}
+
+int pic32_set_lcd_mode(int mode)
+{
+ u32 mask = mode ? BIT(30) : 0;
+
+ return pic32_conf_modify_atomic(PIC32_CFGCON2, BIT(30), mask);
+}
+
+int pic32_set_sdhci_adma_fifo_threshold(u32 rthrsh, u32 wthrsh)
+{
+ u32 clr, set;
+
+ clr = (0x3ff << 4) | (0x3ff << 16);
+ set = (rthrsh << 4) | (wthrsh << 16);
+ return pic32_conf_modify_atomic(PIC32_CFGCON2, clr, set);
+}
+
+void pic32_syskey_unlock_debug(const char *func, const ulong line)
+{
+ void __iomem *syskey = pic32_conf_base + PIC32_SYSKEY;
+
+ pr_debug("%s: called from %s:%lu\n", __func__, func, line);
+ writel(0x00000000, syskey);
+ writel(0xAA996655, syskey);
+ writel(0x556699AA, syskey);
+}
+
+static u32 pic32_get_device_id(void)
+{
+ return pic32_conf_get_reg_field(PIC32_DEVID, 0, 0x0fffffff);
+}
+
+static u32 pic32_get_device_version(void)
+{
+ return pic32_conf_get_reg_field(PIC32_DEVID, 28, 0xf);
+}
+
+u32 pic32_get_boot_status(void)
+{
+ return pic32_reset_status;
+}
+EXPORT_SYMBOL(pic32_get_boot_status);
+
+void __init pic32_config_init(void)
+{
+ pic32_conf_base = ioremap(PIC32_BASE_CONFIG, 0x110);
+ if (!pic32_conf_base)
+ panic("pic32: config base not mapped");
+
+ /* Boot Status */
+ pic32_reset_status = readl(pic32_conf_base + PIC32_RCON);
+ writel(-1, PIC32_CLR(pic32_conf_base + PIC32_RCON));
+
+ /* Device Inforation */
+ pr_info("Device Id: 0x%08x, Device Ver: 0x%04x\n",
+ pic32_get_device_id(),
+ pic32_get_device_version());
+}
diff --git a/arch/mips/pic32/pic32mzda/early_clk.c b/arch/mips/pic32/pic32mzda/early_clk.c
new file mode 100644
index 000000000000..96c090e9d637
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/early_clk.c
@@ -0,0 +1,106 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#include <asm/mach-pic32/pic32.h>
+
+#include "pic32mzda.h"
+
+/* Oscillators, PLL & clocks */
+#define ICLK_MASK 0x00000080
+#define PLLDIV_MASK 0x00000007
+#define CUROSC_MASK 0x00000007
+#define PLLMUL_MASK 0x0000007F
+#define PB_MASK 0x00000007
+#define FRC1 0
+#define FRC2 7
+#define SPLL 1
+#define POSC 2
+#define FRC_CLK 8000000
+
+#define PIC32_POSC_FREQ 24000000
+
+#define OSCCON 0x0000
+#define SPLLCON 0x0020
+#define PB1DIV 0x0140
+
+u32 pic32_get_sysclk(void)
+{
+ u32 osc_freq = 0;
+ u32 pllclk;
+ u32 frcdivn;
+ u32 osccon;
+ u32 spllcon;
+ int curr_osc;
+
+ u32 plliclk;
+ u32 pllidiv;
+ u32 pllodiv;
+ u32 pllmult;
+ u32 frcdiv;
+
+ void __iomem *osc_base = ioremap(PIC32_BASE_OSC, 0x200);
+
+ osccon = __raw_readl(osc_base + OSCCON);
+ spllcon = __raw_readl(osc_base + SPLLCON);
+
+ plliclk = (spllcon & ICLK_MASK);
+ pllidiv = ((spllcon >> 8) & PLLDIV_MASK) + 1;
+ pllodiv = ((spllcon >> 24) & PLLDIV_MASK);
+ pllmult = ((spllcon >> 16) & PLLMUL_MASK) + 1;
+ frcdiv = ((osccon >> 24) & PLLDIV_MASK);
+
+ pllclk = plliclk ? FRC_CLK : PIC32_POSC_FREQ;
+ frcdivn = ((1 << frcdiv) + 1) + (128 * (frcdiv == 7));
+
+ if (pllodiv < 2)
+ pllodiv = 2;
+ else if (pllodiv < 5)
+ pllodiv = (1 << pllodiv);
+ else
+ pllodiv = 32;
+
+ curr_osc = (int)((osccon >> 12) & CUROSC_MASK);
+
+ switch (curr_osc) {
+ case FRC1:
+ case FRC2:
+ osc_freq = FRC_CLK / frcdivn;
+ break;
+ case SPLL:
+ osc_freq = ((pllclk / pllidiv) * pllmult) / pllodiv;
+ break;
+ case POSC:
+ osc_freq = PIC32_POSC_FREQ;
+ break;
+ default:
+ break;
+ }
+
+ iounmap(osc_base);
+
+ return osc_freq;
+}
+
+u32 pic32_get_pbclk(int bus)
+{
+ u32 clk_freq;
+ void __iomem *osc_base = ioremap(PIC32_BASE_OSC, 0x200);
+ u32 pbxdiv = PB1DIV + ((bus - 1) * 0x10);
+ u32 pbdiv = (__raw_readl(osc_base + pbxdiv) & PB_MASK) + 1;
+
+ iounmap(osc_base);
+
+ clk_freq = pic32_get_sysclk();
+
+ return clk_freq / pbdiv;
+}
diff --git a/arch/mips/pic32/pic32mzda/early_console.c b/arch/mips/pic32/pic32mzda/early_console.c
new file mode 100644
index 000000000000..d7b783463fac
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/early_console.c
@@ -0,0 +1,171 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#include <asm/mach-pic32/pic32.h>
+#include <asm/fw/fw.h>
+
+#include "pic32mzda.h"
+#include "early_pin.h"
+
+/* Default early console parameters */
+#define EARLY_CONSOLE_PORT 1
+#define EARLY_CONSOLE_BAUDRATE 115200
+
+#define UART_ENABLE BIT(15)
+#define UART_ENABLE_RX BIT(12)
+#define UART_ENABLE_TX BIT(10)
+#define UART_TX_FULL BIT(9)
+
+/* UART1(x == 0) - UART6(x == 5) */
+#define UART_BASE(x) ((x) * 0x0200)
+#define U_MODE(x) UART_BASE(x)
+#define U_STA(x) (UART_BASE(x) + 0x10)
+#define U_TXR(x) (UART_BASE(x) + 0x20)
+#define U_BRG(x) (UART_BASE(x) + 0x40)
+
+static void __iomem *uart_base;
+static char console_port = -1;
+
+static int __init configure_uart_pins(int port)
+{
+ switch (port) {
+ case 1:
+ pic32_pps_input(IN_FUNC_U2RX, IN_RPB0);
+ pic32_pps_output(OUT_FUNC_U2TX, OUT_RPG9);
+ break;
+ case 5:
+ pic32_pps_input(IN_FUNC_U6RX, IN_RPD0);
+ pic32_pps_output(OUT_FUNC_U6TX, OUT_RPB8);
+ break;
+ default:
+ return -1;
+ }
+
+ return 0;
+}
+
+static void __init configure_uart(char port, int baud)
+{
+ u32 pbclk;
+
+ pbclk = pic32_get_pbclk(2);
+
+ __raw_writel(0, uart_base + U_MODE(port));
+ __raw_writel(((pbclk / baud) / 16) - 1, uart_base + U_BRG(port));
+ __raw_writel(UART_ENABLE, uart_base + U_MODE(port));
+ __raw_writel(UART_ENABLE_TX | UART_ENABLE_RX,
+ uart_base + PIC32_SET(U_STA(port)));
+}
+
+static void __init setup_early_console(char port, int baud)
+{
+ if (configure_uart_pins(port))
+ return;
+
+ console_port = port;
+ configure_uart(console_port, baud);
+}
+
+static char * __init pic32_getcmdline(void)
+{
+ /*
+ * arch_mem_init() has not been called yet, so we don't have a real
+ * command line setup if using CONFIG_CMDLINE_BOOL.
+ */
+#ifdef CONFIG_CMDLINE_OVERRIDE
+ return CONFIG_CMDLINE;
+#else
+ return fw_getcmdline();
+#endif
+}
+
+static int __init get_port_from_cmdline(char *arch_cmdline)
+{
+ char *s;
+ int port = -1;
+
+ if (!arch_cmdline || *arch_cmdline == '\0')
+ goto _out;
+
+ s = strstr(arch_cmdline, "earlyprintk=");
+ if (s) {
+ s = strstr(s, "ttyS");
+ if (s)
+ s += 4;
+ else
+ goto _out;
+
+ port = (*s) - '0';
+ }
+
+_out:
+ return port;
+}
+
+static int __init get_baud_from_cmdline(char *arch_cmdline)
+{
+ char *s;
+ int baud = -1;
+
+ if (!arch_cmdline || *arch_cmdline == '\0')
+ goto _out;
+
+ s = strstr(arch_cmdline, "earlyprintk=");
+ if (s) {
+ s = strstr(s, "ttyS");
+ if (s)
+ s += 6;
+ else
+ goto _out;
+
+ baud = 0;
+ while (*s >= '0' && *s <= '9')
+ baud = baud * 10 + *s++ - '0';
+ }
+
+_out:
+ return baud;
+}
+
+void __init fw_init_early_console(char port)
+{
+ char *arch_cmdline = pic32_getcmdline();
+ int baud = -1;
+
+ uart_base = ioremap_nocache(PIC32_BASE_UART, 0xc00);
+
+ baud = get_baud_from_cmdline(arch_cmdline);
+ if (port == -1)
+ port = get_port_from_cmdline(arch_cmdline);
+
+ if (port == -1)
+ port = EARLY_CONSOLE_PORT;
+
+ if (baud == -1)
+ baud = EARLY_CONSOLE_BAUDRATE;
+
+ setup_early_console(port, baud);
+}
+
+int prom_putchar(char c)
+{
+ if (console_port >= 0) {
+ while (__raw_readl(
+ uart_base + U_STA(console_port)) & UART_TX_FULL)
+ ;
+
+ __raw_writel(c, uart_base + U_TXR(console_port));
+ }
+
+ return 1;
+}
diff --git a/arch/mips/pic32/pic32mzda/early_pin.c b/arch/mips/pic32/pic32mzda/early_pin.c
new file mode 100644
index 000000000000..aa673f8023a8
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/early_pin.c
@@ -0,0 +1,275 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#include <asm/io.h>
+
+#include "early_pin.h"
+
+#define PPS_BASE 0x1f800000
+
+/* Input PPS Registers */
+#define INT1R 0x1404
+#define INT2R 0x1408
+#define INT3R 0x140C
+#define INT4R 0x1410
+#define T2CKR 0x1418
+#define T3CKR 0x141C
+#define T4CKR 0x1420
+#define T5CKR 0x1424
+#define T6CKR 0x1428
+#define T7CKR 0x142C
+#define T8CKR 0x1430
+#define T9CKR 0x1434
+#define IC1R 0x1438
+#define IC2R 0x143C
+#define IC3R 0x1440
+#define IC4R 0x1444
+#define IC5R 0x1448
+#define IC6R 0x144C
+#define IC7R 0x1450
+#define IC8R 0x1454
+#define IC9R 0x1458
+#define OCFAR 0x1460
+#define U1RXR 0x1468
+#define U1CTSR 0x146C
+#define U2RXR 0x1470
+#define U2CTSR 0x1474
+#define U3RXR 0x1478
+#define U3CTSR 0x147C
+#define U4RXR 0x1480
+#define U4CTSR 0x1484
+#define U5RXR 0x1488
+#define U5CTSR 0x148C
+#define U6RXR 0x1490
+#define U6CTSR 0x1494
+#define SDI1R 0x149C
+#define SS1R 0x14A0
+#define SDI2R 0x14A8
+#define SS2R 0x14AC
+#define SDI3R 0x14B4
+#define SS3R 0x14B8
+#define SDI4R 0x14C0
+#define SS4R 0x14C4
+#define SDI5R 0x14CC
+#define SS5R 0x14D0
+#define SDI6R 0x14D8
+#define SS6R 0x14DC
+#define C1RXR 0x14E0
+#define C2RXR 0x14E4
+#define REFCLKI1R 0x14E8
+#define REFCLKI3R 0x14F0
+#define REFCLKI4R 0x14F4
+
+static const struct
+{
+ int function;
+ int reg;
+} input_pin_reg[] = {
+ { IN_FUNC_INT3, INT3R },
+ { IN_FUNC_T2CK, T2CKR },
+ { IN_FUNC_T6CK, T6CKR },
+ { IN_FUNC_IC3, IC3R },
+ { IN_FUNC_IC7, IC7R },
+ { IN_FUNC_U1RX, U1RXR },
+ { IN_FUNC_U2CTS, U2CTSR },
+ { IN_FUNC_U5RX, U5RXR },
+ { IN_FUNC_U6CTS, U6CTSR },
+ { IN_FUNC_SDI1, SDI1R },
+ { IN_FUNC_SDI3, SDI3R },
+ { IN_FUNC_SDI5, SDI5R },
+ { IN_FUNC_SS6, SS6R },
+ { IN_FUNC_REFCLKI1, REFCLKI1R },
+ { IN_FUNC_INT4, INT4R },
+ { IN_FUNC_T5CK, T5CKR },
+ { IN_FUNC_T7CK, T7CKR },
+ { IN_FUNC_IC4, IC4R },
+ { IN_FUNC_IC8, IC8R },
+ { IN_FUNC_U3RX, U3RXR },
+ { IN_FUNC_U4CTS, U4CTSR },
+ { IN_FUNC_SDI2, SDI2R },
+ { IN_FUNC_SDI4, SDI4R },
+ { IN_FUNC_C1RX, C1RXR },
+ { IN_FUNC_REFCLKI4, REFCLKI4R },
+ { IN_FUNC_INT2, INT2R },
+ { IN_FUNC_T3CK, T3CKR },
+ { IN_FUNC_T8CK, T8CKR },
+ { IN_FUNC_IC2, IC2R },
+ { IN_FUNC_IC5, IC5R },
+ { IN_FUNC_IC9, IC9R },
+ { IN_FUNC_U1CTS, U1CTSR },
+ { IN_FUNC_U2RX, U2RXR },
+ { IN_FUNC_U5CTS, U5CTSR },
+ { IN_FUNC_SS1, SS1R },
+ { IN_FUNC_SS3, SS3R },
+ { IN_FUNC_SS4, SS4R },
+ { IN_FUNC_SS5, SS5R },
+ { IN_FUNC_C2RX, C2RXR },
+ { IN_FUNC_INT1, INT1R },
+ { IN_FUNC_T4CK, T4CKR },
+ { IN_FUNC_T9CK, T9CKR },
+ { IN_FUNC_IC1, IC1R },
+ { IN_FUNC_IC6, IC6R },
+ { IN_FUNC_U3CTS, U3CTSR },
+ { IN_FUNC_U4RX, U4RXR },
+ { IN_FUNC_U6RX, U6RXR },
+ { IN_FUNC_SS2, SS2R },
+ { IN_FUNC_SDI6, SDI6R },
+ { IN_FUNC_OCFA, OCFAR },
+ { IN_FUNC_REFCLKI3, REFCLKI3R },
+};
+
+void pic32_pps_input(int function, int pin)
+{
+ void __iomem *pps_base = ioremap_nocache(PPS_BASE, 0xF4);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(input_pin_reg); i++) {
+ if (input_pin_reg[i].function == function) {
+ __raw_writel(pin, pps_base + input_pin_reg[i].reg);
+ return;
+ }
+ }
+
+ iounmap(pps_base);
+}
+
+/* Output PPS Registers */
+#define RPA14R 0x1538
+#define RPA15R 0x153C
+#define RPB0R 0x1540
+#define RPB1R 0x1544
+#define RPB2R 0x1548
+#define RPB3R 0x154C
+#define RPB5R 0x1554
+#define RPB6R 0x1558
+#define RPB7R 0x155C
+#define RPB8R 0x1560
+#define RPB9R 0x1564
+#define RPB10R 0x1568
+#define RPB14R 0x1578
+#define RPB15R 0x157C
+#define RPC1R 0x1584
+#define RPC2R 0x1588
+#define RPC3R 0x158C
+#define RPC4R 0x1590
+#define RPC13R 0x15B4
+#define RPC14R 0x15B8
+#define RPD0R 0x15C0
+#define RPD1R 0x15C4
+#define RPD2R 0x15C8
+#define RPD3R 0x15CC
+#define RPD4R 0x15D0
+#define RPD5R 0x15D4
+#define RPD6R 0x15D8
+#define RPD7R 0x15DC
+#define RPD9R 0x15E4
+#define RPD10R 0x15E8
+#define RPD11R 0x15EC
+#define RPD12R 0x15F0
+#define RPD14R 0x15F8
+#define RPD15R 0x15FC
+#define RPE3R 0x160C
+#define RPE5R 0x1614
+#define RPE8R 0x1620
+#define RPE9R 0x1624
+#define RPF0R 0x1640
+#define RPF1R 0x1644
+#define RPF2R 0x1648
+#define RPF3R 0x164C
+#define RPF4R 0x1650
+#define RPF5R 0x1654
+#define RPF8R 0x1660
+#define RPF12R 0x1670
+#define RPF13R 0x1674
+#define RPG0R 0x1680
+#define RPG1R 0x1684
+#define RPG6R 0x1698
+#define RPG7R 0x169C
+#define RPG8R 0x16A0
+#define RPG9R 0x16A4
+
+static const struct
+{
+ int pin;
+ int reg;
+} output_pin_reg[] = {
+ { OUT_RPD2, RPD2R },
+ { OUT_RPG8, RPG8R },
+ { OUT_RPF4, RPF4R },
+ { OUT_RPD10, RPD10R },
+ { OUT_RPF1, RPF1R },
+ { OUT_RPB9, RPB9R },
+ { OUT_RPB10, RPB10R },
+ { OUT_RPC14, RPC14R },
+ { OUT_RPB5, RPB5R },
+ { OUT_RPC1, RPC1R },
+ { OUT_RPD14, RPD14R },
+ { OUT_RPG1, RPG1R },
+ { OUT_RPA14, RPA14R },
+ { OUT_RPD6, RPD6R },
+ { OUT_RPD3, RPD3R },
+ { OUT_RPG7, RPG7R },
+ { OUT_RPF5, RPF5R },
+ { OUT_RPD11, RPD11R },
+ { OUT_RPF0, RPF0R },
+ { OUT_RPB1, RPB1R },
+ { OUT_RPE5, RPE5R },
+ { OUT_RPC13, RPC13R },
+ { OUT_RPB3, RPB3R },
+ { OUT_RPC4, RPC4R },
+ { OUT_RPD15, RPD15R },
+ { OUT_RPG0, RPG0R },
+ { OUT_RPA15, RPA15R },
+ { OUT_RPD7, RPD7R },
+ { OUT_RPD9, RPD9R },
+ { OUT_RPG6, RPG6R },
+ { OUT_RPB8, RPB8R },
+ { OUT_RPB15, RPB15R },
+ { OUT_RPD4, RPD4R },
+ { OUT_RPB0, RPB0R },
+ { OUT_RPE3, RPE3R },
+ { OUT_RPB7, RPB7R },
+ { OUT_RPF12, RPF12R },
+ { OUT_RPD12, RPD12R },
+ { OUT_RPF8, RPF8R },
+ { OUT_RPC3, RPC3R },
+ { OUT_RPE9, RPE9R },
+ { OUT_RPD1, RPD1R },
+ { OUT_RPG9, RPG9R },
+ { OUT_RPB14, RPB14R },
+ { OUT_RPD0, RPD0R },
+ { OUT_RPB6, RPB6R },
+ { OUT_RPD5, RPD5R },
+ { OUT_RPB2, RPB2R },
+ { OUT_RPF3, RPF3R },
+ { OUT_RPF13, RPF13R },
+ { OUT_RPC2, RPC2R },
+ { OUT_RPE8, RPE8R },
+ { OUT_RPF2, RPF2R },
+};
+
+void pic32_pps_output(int function, int pin)
+{
+ void __iomem *pps_base = ioremap_nocache(PPS_BASE, 0x170);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(output_pin_reg); i++) {
+ if (output_pin_reg[i].pin == pin) {
+ __raw_writel(function,
+ pps_base + output_pin_reg[i].reg);
+ return;
+ }
+ }
+
+ iounmap(pps_base);
+}
diff --git a/arch/mips/pic32/pic32mzda/early_pin.h b/arch/mips/pic32/pic32mzda/early_pin.h
new file mode 100644
index 000000000000..417fae9a9627
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/early_pin.h
@@ -0,0 +1,241 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef _PIC32MZDA_EARLY_PIN_H
+#define _PIC32MZDA_EARLY_PIN_H
+
+/*
+ * This is a complete, yet overly simplistic and unoptimized, PIC32MZDA PPS
+ * configuration only useful before we have full pinctrl initialized.
+ */
+
+/* Input PPS Functions */
+enum {
+ IN_FUNC_INT3,
+ IN_FUNC_T2CK,
+ IN_FUNC_T6CK,
+ IN_FUNC_IC3,
+ IN_FUNC_IC7,
+ IN_FUNC_U1RX,
+ IN_FUNC_U2CTS,
+ IN_FUNC_U5RX,
+ IN_FUNC_U6CTS,
+ IN_FUNC_SDI1,
+ IN_FUNC_SDI3,
+ IN_FUNC_SDI5,
+ IN_FUNC_SS6,
+ IN_FUNC_REFCLKI1,
+ IN_FUNC_INT4,
+ IN_FUNC_T5CK,
+ IN_FUNC_T7CK,
+ IN_FUNC_IC4,
+ IN_FUNC_IC8,
+ IN_FUNC_U3RX,
+ IN_FUNC_U4CTS,
+ IN_FUNC_SDI2,
+ IN_FUNC_SDI4,
+ IN_FUNC_C1RX,
+ IN_FUNC_REFCLKI4,
+ IN_FUNC_INT2,
+ IN_FUNC_T3CK,
+ IN_FUNC_T8CK,
+ IN_FUNC_IC2,
+ IN_FUNC_IC5,
+ IN_FUNC_IC9,
+ IN_FUNC_U1CTS,
+ IN_FUNC_U2RX,
+ IN_FUNC_U5CTS,
+ IN_FUNC_SS1,
+ IN_FUNC_SS3,
+ IN_FUNC_SS4,
+ IN_FUNC_SS5,
+ IN_FUNC_C2RX,
+ IN_FUNC_INT1,
+ IN_FUNC_T4CK,
+ IN_FUNC_T9CK,
+ IN_FUNC_IC1,
+ IN_FUNC_IC6,
+ IN_FUNC_U3CTS,
+ IN_FUNC_U4RX,
+ IN_FUNC_U6RX,
+ IN_FUNC_SS2,
+ IN_FUNC_SDI6,
+ IN_FUNC_OCFA,
+ IN_FUNC_REFCLKI3,
+};
+
+/* Input PPS Pins */
+#define IN_RPD2 0x00
+#define IN_RPG8 0x01
+#define IN_RPF4 0x02
+#define IN_RPD10 0x03
+#define IN_RPF1 0x04
+#define IN_RPB9 0x05
+#define IN_RPB10 0x06
+#define IN_RPC14 0x07
+#define IN_RPB5 0x08
+#define IN_RPC1 0x0A
+#define IN_RPD14 0x0B
+#define IN_RPG1 0x0C
+#define IN_RPA14 0x0D
+#define IN_RPD6 0x0E
+#define IN_RPD3 0x00
+#define IN_RPG7 0x01
+#define IN_RPF5 0x02
+#define IN_RPD11 0x03
+#define IN_RPF0 0x04
+#define IN_RPB1 0x05
+#define IN_RPE5 0x06
+#define IN_RPC13 0x07
+#define IN_RPB3 0x08
+#define IN_RPC4 0x0A
+#define IN_RPD15 0x0B
+#define IN_RPG0 0x0C
+#define IN_RPA15 0x0D
+#define IN_RPD7 0x0E
+#define IN_RPD9 0x00
+#define IN_RPG6 0x01
+#define IN_RPB8 0x02
+#define IN_RPB15 0x03
+#define IN_RPD4 0x04
+#define IN_RPB0 0x05
+#define IN_RPE3 0x06
+#define IN_RPB7 0x07
+#define IN_RPF12 0x09
+#define IN_RPD12 0x0A
+#define IN_RPF8 0x0B
+#define IN_RPC3 0x0C
+#define IN_RPE9 0x0D
+#define IN_RPD1 0x00
+#define IN_RPG9 0x01
+#define IN_RPB14 0x02
+#define IN_RPD0 0x03
+#define IN_RPB6 0x05
+#define IN_RPD5 0x06
+#define IN_RPB2 0x07
+#define IN_RPF3 0x08
+#define IN_RPF13 0x09
+#define IN_RPF2 0x0B
+#define IN_RPC2 0x0C
+#define IN_RPE8 0x0D
+
+/* Output PPS Pins */
+enum {
+ OUT_RPD2,
+ OUT_RPG8,
+ OUT_RPF4,
+ OUT_RPD10,
+ OUT_RPF1,
+ OUT_RPB9,
+ OUT_RPB10,
+ OUT_RPC14,
+ OUT_RPB5,
+ OUT_RPC1,
+ OUT_RPD14,
+ OUT_RPG1,
+ OUT_RPA14,
+ OUT_RPD6,
+ OUT_RPD3,
+ OUT_RPG7,
+ OUT_RPF5,
+ OUT_RPD11,
+ OUT_RPF0,
+ OUT_RPB1,
+ OUT_RPE5,
+ OUT_RPC13,
+ OUT_RPB3,
+ OUT_RPC4,
+ OUT_RPD15,
+ OUT_RPG0,
+ OUT_RPA15,
+ OUT_RPD7,
+ OUT_RPD9,
+ OUT_RPG6,
+ OUT_RPB8,
+ OUT_RPB15,
+ OUT_RPD4,
+ OUT_RPB0,
+ OUT_RPE3,
+ OUT_RPB7,
+ OUT_RPF12,
+ OUT_RPD12,
+ OUT_RPF8,
+ OUT_RPC3,
+ OUT_RPE9,
+ OUT_RPD1,
+ OUT_RPG9,
+ OUT_RPB14,
+ OUT_RPD0,
+ OUT_RPB6,
+ OUT_RPD5,
+ OUT_RPB2,
+ OUT_RPF3,
+ OUT_RPF13,
+ OUT_RPC2,
+ OUT_RPE8,
+ OUT_RPF2,
+};
+
+/* Output PPS Functions */
+#define OUT_FUNC_U3TX 0x01
+#define OUT_FUNC_U4RTS 0x02
+#define OUT_FUNC_SDO1 0x05
+#define OUT_FUNC_SDO2 0x06
+#define OUT_FUNC_SDO3 0x07
+#define OUT_FUNC_SDO5 0x09
+#define OUT_FUNC_SS6 0x0A
+#define OUT_FUNC_OC3 0x0B
+#define OUT_FUNC_OC6 0x0C
+#define OUT_FUNC_REFCLKO4 0x0D
+#define OUT_FUNC_C2OUT 0x0E
+#define OUT_FUNC_C1TX 0x0F
+#define OUT_FUNC_U1TX 0x01
+#define OUT_FUNC_U2RTS 0x02
+#define OUT_FUNC_U5TX 0x03
+#define OUT_FUNC_U6RTS 0x04
+#define OUT_FUNC_SDO1 0x05
+#define OUT_FUNC_SDO2 0x06
+#define OUT_FUNC_SDO3 0x07
+#define OUT_FUNC_SDO4 0x08
+#define OUT_FUNC_SDO5 0x09
+#define OUT_FUNC_OC4 0x0B
+#define OUT_FUNC_OC7 0x0C
+#define OUT_FUNC_REFCLKO1 0x0F
+#define OUT_FUNC_U3RTS 0x01
+#define OUT_FUNC_U4TX 0x02
+#define OUT_FUNC_U6TX 0x04
+#define OUT_FUNC_SS1 0x05
+#define OUT_FUNC_SS3 0x07
+#define OUT_FUNC_SS4 0x08
+#define OUT_FUNC_SS5 0x09
+#define OUT_FUNC_SDO6 0x0A
+#define OUT_FUNC_OC5 0x0B
+#define OUT_FUNC_OC8 0x0C
+#define OUT_FUNC_C1OUT 0x0E
+#define OUT_FUNC_REFCLKO3 0x0F
+#define OUT_FUNC_U1RTS 0x01
+#define OUT_FUNC_U2TX 0x02
+#define OUT_FUNC_U5RTS 0x03
+#define OUT_FUNC_U6TX 0x04
+#define OUT_FUNC_SS2 0x06
+#define OUT_FUNC_SDO4 0x08
+#define OUT_FUNC_SDO6 0x0A
+#define OUT_FUNC_OC2 0x0B
+#define OUT_FUNC_OC1 0x0C
+#define OUT_FUNC_OC9 0x0D
+#define OUT_FUNC_C2TX 0x0F
+
+void pic32_pps_input(int function, int pin);
+void pic32_pps_output(int function, int pin);
+
+#endif
diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c
new file mode 100644
index 000000000000..775ff90a9962
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/init.c
@@ -0,0 +1,156 @@
+/*
+ * Joshua Henderson, joshua.henderson@microchip.com
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/platform_data/sdhci-pic32.h>
+
+#include <asm/fw/fw.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/prom.h>
+
+#include "pic32mzda.h"
+
+const char *get_system_type(void)
+{
+ return "PIC32MZDA";
+}
+
+static ulong get_fdtaddr(void)
+{
+ ulong ftaddr = 0;
+
+ if ((fw_arg0 == -2) && fw_arg1 && !fw_arg2 && !fw_arg3)
+ return (ulong)fw_arg1;
+
+ if (__dtb_start < __dtb_end)
+ ftaddr = (ulong)__dtb_start;
+
+ return ftaddr;
+}
+
+void __init plat_mem_setup(void)
+{
+ void *dtb;
+
+ dtb = (void *)get_fdtaddr();
+ if (!dtb) {
+ pr_err("pic32: no DTB found.\n");
+ return;
+ }
+
+ /*
+ * Load the builtin device tree. This causes the chosen node to be
+ * parsed resulting in our memory appearing.
+ */
+ __dt_setup_arch(dtb);
+
+ pr_info("Found following command lines\n");
+ pr_info(" boot_command_line: %s\n", boot_command_line);
+ pr_info(" arcs_cmdline : %s\n", arcs_cmdline);
+#ifdef CONFIG_CMDLINE_BOOL
+ pr_info(" builtin_cmdline : %s\n", CONFIG_CMDLINE);
+#endif
+ if (dtb != __dtb_start)
+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+
+#ifdef CONFIG_EARLY_PRINTK
+ fw_init_early_console(-1);
+#endif
+ pic32_config_init();
+}
+
+static __init void pic32_init_cmdline(int argc, char *argv[])
+{
+ unsigned int count = COMMAND_LINE_SIZE - 1;
+ int i;
+ char *dst = &(arcs_cmdline[0]);
+ char *src;
+
+ for (i = 1; i < argc && count; ++i) {
+ src = argv[i];
+ while (*src && count) {
+ *dst++ = *src++;
+ --count;
+ }
+ *dst++ = ' ';
+ }
+ if (i > 1)
+ --dst;
+
+ *dst = 0;
+}
+
+void __init prom_init(void)
+{
+ pic32_init_cmdline((int)fw_arg0, (char **)fw_arg1);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+void __init device_tree_init(void)
+{
+ if (!initial_boot_params)
+ return;
+
+ unflatten_and_copy_device_tree();
+}
+
+static struct pic32_sdhci_platform_data sdhci_data = {
+ .setup_dma = pic32_set_sdhci_adma_fifo_threshold,
+};
+
+static struct of_dev_auxdata pic32_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("microchip,pic32mzda-sdhci", 0, "sdhci", &sdhci_data),
+ { /* sentinel */}
+};
+
+static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup)
+{
+ struct device_node *root, *np;
+ struct resource res;
+
+ root = of_find_node_by_path("/");
+
+ for (; lookup->compatible; lookup++) {
+ np = of_find_compatible_node(NULL, NULL, lookup->compatible);
+ if (np) {
+ lookup->name = (char *)np->name;
+ if (lookup->phys_addr)
+ continue;
+ if (!of_address_to_resource(np, 0, &res))
+ lookup->phys_addr = res.start;
+ }
+ }
+
+ return 0;
+}
+
+static int __init plat_of_setup(void)
+{
+ if (!of_have_populated_dt())
+ panic("Device tree not present");
+
+ pic32_of_prepare_platform_data(pic32_auxdata_lookup);
+ if (of_platform_populate(NULL, of_default_bus_match_table,
+ pic32_auxdata_lookup, NULL))
+ panic("Failed to populate DT");
+
+ return 0;
+}
+arch_initcall(plat_of_setup);
diff --git a/arch/mips/pic32/pic32mzda/pic32mzda.h b/arch/mips/pic32/pic32mzda/pic32mzda.h
new file mode 100644
index 000000000000..96d10e2af475
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/pic32mzda.h
@@ -0,0 +1,29 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef PIC32MZDA_COMMON_H
+#define PIC32MZDA_COMMON_H
+
+/* early clock */
+u32 pic32_get_pbclk(int bus);
+u32 pic32_get_sysclk(void);
+
+/* Device configuration */
+void __init pic32_config_init(void);
+int pic32_set_lcd_mode(int mode);
+int pic32_set_sdhci_adma_fifo_threshold(u32 rthrs, u32 wthrs);
+u32 pic32_get_boot_status(void);
+int pic32_disable_lcd(void);
+int pic32_enable_lcd(void);
+
+#endif
diff --git a/arch/mips/pic32/pic32mzda/time.c b/arch/mips/pic32/pic32mzda/time.c
new file mode 100644
index 000000000000..ca6a62bb10db
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/time.c
@@ -0,0 +1,73 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+
+#include <asm/time.h>
+
+#include "pic32mzda.h"
+
+static const struct of_device_id pic32_infra_match[] = {
+ { .compatible = "microchip,pic32mzda-infra", },
+ { },
+};
+
+#define DEFAULT_CORE_TIMER_INTERRUPT 0
+
+static unsigned int pic32_xlate_core_timer_irq(void)
+{
+ static struct device_node *node;
+ unsigned int irq;
+
+ node = of_find_matching_node(NULL, pic32_infra_match);
+
+ if (WARN_ON(!node))
+ goto default_map;
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (!irq)
+ goto default_map;
+
+ return irq;
+
+default_map:
+
+ return irq_create_mapping(NULL, DEFAULT_CORE_TIMER_INTERRUPT);
+}
+
+unsigned int get_c0_compare_int(void)
+{
+ return pic32_xlate_core_timer_irq();
+}
+
+void __init plat_time_init(void)
+{
+ struct clk *clk;
+
+ of_clk_init(NULL);
+ clk = clk_get_sys("cpu_clk", NULL);
+ if (IS_ERR(clk))
+ panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
+
+ clk_prepare_enable(clk);
+ pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
+ mips_hpt_frequency = clk_get_rate(clk) / 2;
+
+ clocksource_probe();
+}
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index e9bc8c96174e..813826a456ca 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -12,6 +12,11 @@ config RALINK_ILL_ACC
depends on SOC_RT305X
default y
+config IRQ_INTC
+ bool
+ default y
+ depends on !SOC_MT7621
+
choice
prompt "Ralink SoC selection"
default SOC_RT305X
@@ -33,7 +38,18 @@ choice
config SOC_MT7620
bool "MT7620/8"
+ select HW_HAS_PCI
+ config SOC_MT7621
+ bool "MT7621"
+ select MIPS_CPU_SCACHE
+ select SYS_SUPPORTS_MULTITHREADING
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_MIPS_CPS
+ select MIPS_GIC
+ select COMMON_CLK
+ select CLKSRC_MIPS_GIC
+ select HW_HAS_PCI
endchoice
choice
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index a6c9d0061326..0d1795a0321e 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -6,16 +6,24 @@
# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
# Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-obj-y := prom.o of.o reset.o clk.o irq.o timer.o
+obj-y := prom.o of.o reset.o
+
+ifndef CONFIG_MIPS_GIC
+ obj-y += clk.o timer.o
+endif
obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
+obj-$(CONFIG_IRQ_INTC) += irq.o
+obj-$(CONFIG_MIPS_GIC) += irq-gic.o timer-gic.o
+
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_SOC_RT3883) += rt3883.o
obj-$(CONFIG_SOC_MT7620) += mt7620.o
+obj-$(CONFIG_SOC_MT7621) += mt7621.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index 6d9c8c499f98..6095fcc334f4 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt
#
load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
+
+# Ralink MT7621
+#
+load-$(CONFIG_SOC_MT7621) += 0xffffffff80001000
+cflags-$(CONFIG_SOC_MT7621) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
diff --git a/arch/mips/ralink/irq-gic.c b/arch/mips/ralink/irq-gic.c
new file mode 100644
index 000000000000..50d6c55ab1de
--- /dev/null
+++ b/arch/mips/ralink/irq-gic.c
@@ -0,0 +1,25 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+
+#include <linux/of.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/mips-gic.h>
+
+int get_c0_perfcount_int(void)
+{
+ return gic_get_c0_perfcount_int();
+}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
+
+void __init arch_init_irq(void)
+{
+ irqchip_init();
+}
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index dfb04fcedb04..0d3d1a97895f 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -107,31 +107,31 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
};
static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
- FUNC("sdcx", 3, 19, 1),
+ FUNC("sdxc d6", 3, 19, 1),
FUNC("utif", 2, 19, 1),
FUNC("gpio", 1, 19, 1),
- FUNC("pwm", 0, 19, 1),
+ FUNC("pwm1", 0, 19, 1),
};
static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
- FUNC("sdcx", 3, 18, 1),
+ FUNC("sdxc d7", 3, 18, 1),
FUNC("utif", 2, 18, 1),
FUNC("gpio", 1, 18, 1),
- FUNC("pwm", 0, 18, 1),
+ FUNC("pwm0", 0, 18, 1),
};
static struct rt2880_pmx_func uart2_grp_mt7628[] = {
- FUNC("sdcx", 3, 20, 2),
+ FUNC("sdxc d5 d4", 3, 20, 2),
FUNC("pwm", 2, 20, 2),
FUNC("gpio", 1, 20, 2),
- FUNC("uart", 0, 20, 2),
+ FUNC("uart2", 0, 20, 2),
};
static struct rt2880_pmx_func uart1_grp_mt7628[] = {
- FUNC("sdcx", 3, 45, 2),
+ FUNC("sw_r", 3, 45, 2),
FUNC("pwm", 2, 45, 2),
FUNC("gpio", 1, 45, 2),
- FUNC("uart", 0, 45, 2),
+ FUNC("uart1", 0, 45, 2),
};
static struct rt2880_pmx_func i2c_grp_mt7628[] = {
@@ -143,21 +143,21 @@ static struct rt2880_pmx_func i2c_grp_mt7628[] = {
static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
-static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) };
+static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
FUNC("jtag", 3, 22, 8),
FUNC("utif", 2, 22, 8),
FUNC("gpio", 1, 22, 8),
- FUNC("sdcx", 0, 22, 8),
+ FUNC("sdxc", 0, 22, 8),
};
static struct rt2880_pmx_func uart0_grp_mt7628[] = {
FUNC("-", 3, 12, 2),
FUNC("-", 2, 12, 2),
FUNC("gpio", 1, 12, 2),
- FUNC("uart", 0, 12, 2),
+ FUNC("uart0", 0, 12, 2),
};
static struct rt2880_pmx_func i2s_grp_mt7628[] = {
@@ -171,7 +171,7 @@ static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
FUNC("-", 3, 6, 1),
FUNC("refclk", 2, 6, 1),
FUNC("gpio", 1, 6, 1),
- FUNC("spi", 0, 6, 1),
+ FUNC("spi cs1", 0, 6, 1),
};
static struct rt2880_pmx_func spis_grp_mt7628[] = {
@@ -188,28 +188,44 @@ static struct rt2880_pmx_func gpio_grp_mt7628[] = {
FUNC("gpio", 0, 11, 1),
};
-#define MT7628_GPIO_MODE_MASK 0x3
-
-#define MT7628_GPIO_MODE_PWM1 30
-#define MT7628_GPIO_MODE_PWM0 28
-#define MT7628_GPIO_MODE_UART2 26
-#define MT7628_GPIO_MODE_UART1 24
-#define MT7628_GPIO_MODE_I2C 20
-#define MT7628_GPIO_MODE_REFCLK 18
-#define MT7628_GPIO_MODE_PERST 16
-#define MT7628_GPIO_MODE_WDT 14
-#define MT7628_GPIO_MODE_SPI 12
-#define MT7628_GPIO_MODE_SDMODE 10
-#define MT7628_GPIO_MODE_UART0 8
-#define MT7628_GPIO_MODE_I2S 6
-#define MT7628_GPIO_MODE_CS1 4
-#define MT7628_GPIO_MODE_SPIS 2
-#define MT7628_GPIO_MODE_GPIO 0
+static struct rt2880_pmx_func wled_kn_grp_mt7628[] = {
+ FUNC("rsvd", 3, 35, 1),
+ FUNC("rsvd", 2, 35, 1),
+ FUNC("gpio", 1, 35, 1),
+ FUNC("wled_kn", 0, 35, 1),
+};
+
+static struct rt2880_pmx_func wled_an_grp_mt7628[] = {
+ FUNC("rsvd", 3, 35, 1),
+ FUNC("rsvd", 2, 35, 1),
+ FUNC("gpio", 1, 35, 1),
+ FUNC("wled_an", 0, 35, 1),
+};
+
+#define MT7628_GPIO_MODE_MASK 0x3
+
+#define MT7628_GPIO_MODE_WLED_KN 48
+#define MT7628_GPIO_MODE_WLED_AN 32
+#define MT7628_GPIO_MODE_PWM1 30
+#define MT7628_GPIO_MODE_PWM0 28
+#define MT7628_GPIO_MODE_UART2 26
+#define MT7628_GPIO_MODE_UART1 24
+#define MT7628_GPIO_MODE_I2C 20
+#define MT7628_GPIO_MODE_REFCLK 18
+#define MT7628_GPIO_MODE_PERST 16
+#define MT7628_GPIO_MODE_WDT 14
+#define MT7628_GPIO_MODE_SPI 12
+#define MT7628_GPIO_MODE_SDMODE 10
+#define MT7628_GPIO_MODE_UART0 8
+#define MT7628_GPIO_MODE_I2S 6
+#define MT7628_GPIO_MODE_CS1 4
+#define MT7628_GPIO_MODE_SPIS 2
+#define MT7628_GPIO_MODE_GPIO 0
static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
1, MT7628_GPIO_MODE_PWM1),
- GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ GRP_G("pmw0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
1, MT7628_GPIO_MODE_PWM0),
GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
1, MT7628_GPIO_MODE_UART2),
@@ -233,6 +249,10 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
1, MT7628_GPIO_MODE_SPIS),
GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
1, MT7628_GPIO_MODE_GPIO),
+ GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_WLED_AN),
+ GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_WLED_KN),
{ 0 }
};
@@ -436,10 +456,13 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000100.timer", periph_rate);
ralink_clk_add("10000120.watchdog", periph_rate);
ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000b40.spi", sys_rate);
ralink_clk_add("10000c00.uartlite", periph_rate);
+ ralink_clk_add("10000d00.uart1", periph_rate);
+ ralink_clk_add("10000e00.uart2", periph_rate);
ralink_clk_add("10180000.wmac", xtal_rate);
- if (IS_ENABLED(CONFIG_USB) && is_mt76x8()) {
+ if (IS_ENABLED(CONFIG_USB) && !is_mt76x8()) {
/*
* When the CPU goes into sleep mode, the BUS clock will be
* too low for USB to function properly. Adjust the busses
@@ -552,7 +575,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
}
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
- "Ralink %s ver:%u eco:%u",
+ "MediaTek %s ver:%u eco:%u",
name,
(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
(rev & CHIP_REV_ECO_MASK));
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
new file mode 100644
index 000000000000..e9b9fa3e1e51
--- /dev/null
+++ b/arch/mips/ralink/mt7621.c
@@ -0,0 +1,226 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/smp-ops.h>
+#include <asm/mips-cm.h>
+#include <asm/mips-cpc.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7621.h>
+
+#include <pinmux.h>
+
+#include "common.h"
+
+#define SYSC_REG_SYSCFG 0x10
+#define SYSC_REG_CPLL_CLKCFG0 0x2c
+#define SYSC_REG_CUR_CLK_STS 0x44
+#define CPU_CLK_SEL (BIT(30) | BIT(31))
+
+#define MT7621_GPIO_MODE_UART1 1
+#define MT7621_GPIO_MODE_I2C 2
+#define MT7621_GPIO_MODE_UART3_MASK 0x3
+#define MT7621_GPIO_MODE_UART3_SHIFT 3
+#define MT7621_GPIO_MODE_UART3_GPIO 1
+#define MT7621_GPIO_MODE_UART2_MASK 0x3
+#define MT7621_GPIO_MODE_UART2_SHIFT 5
+#define MT7621_GPIO_MODE_UART2_GPIO 1
+#define MT7621_GPIO_MODE_JTAG 7
+#define MT7621_GPIO_MODE_WDT_MASK 0x3
+#define MT7621_GPIO_MODE_WDT_SHIFT 8
+#define MT7621_GPIO_MODE_WDT_GPIO 1
+#define MT7621_GPIO_MODE_PCIE_RST 0
+#define MT7621_GPIO_MODE_PCIE_REF 2
+#define MT7621_GPIO_MODE_PCIE_MASK 0x3
+#define MT7621_GPIO_MODE_PCIE_SHIFT 10
+#define MT7621_GPIO_MODE_PCIE_GPIO 1
+#define MT7621_GPIO_MODE_MDIO_MASK 0x3
+#define MT7621_GPIO_MODE_MDIO_SHIFT 12
+#define MT7621_GPIO_MODE_MDIO_GPIO 1
+#define MT7621_GPIO_MODE_RGMII1 14
+#define MT7621_GPIO_MODE_RGMII2 15
+#define MT7621_GPIO_MODE_SPI_MASK 0x3
+#define MT7621_GPIO_MODE_SPI_SHIFT 16
+#define MT7621_GPIO_MODE_SPI_GPIO 1
+#define MT7621_GPIO_MODE_SDHCI_MASK 0x3
+#define MT7621_GPIO_MODE_SDHCI_SHIFT 18
+#define MT7621_GPIO_MODE_SDHCI_GPIO 1
+
+static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
+static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
+static struct rt2880_pmx_func uart3_grp[] = {
+ FUNC("uart3", 0, 5, 4),
+ FUNC("i2s", 2, 5, 4),
+ FUNC("spdif3", 3, 5, 4),
+};
+static struct rt2880_pmx_func uart2_grp[] = {
+ FUNC("uart2", 0, 9, 4),
+ FUNC("pcm", 2, 9, 4),
+ FUNC("spdif2", 3, 9, 4),
+};
+static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
+static struct rt2880_pmx_func wdt_grp[] = {
+ FUNC("wdt rst", 0, 18, 1),
+ FUNC("wdt refclk", 2, 18, 1),
+};
+static struct rt2880_pmx_func pcie_rst_grp[] = {
+ FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
+ FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
+};
+static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
+static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
+static struct rt2880_pmx_func spi_grp[] = {
+ FUNC("spi", 0, 34, 7),
+ FUNC("nand1", 2, 34, 7),
+};
+static struct rt2880_pmx_func sdhci_grp[] = {
+ FUNC("sdhci", 0, 41, 8),
+ FUNC("nand2", 2, 41, 8),
+};
+static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
+
+static struct rt2880_pmx_group mt7621_pinmux_data[] = {
+ GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
+ GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
+ GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK,
+ MT7621_GPIO_MODE_UART3_GPIO, MT7621_GPIO_MODE_UART3_SHIFT),
+ GRP_G("uart2", uart2_grp, MT7621_GPIO_MODE_UART2_MASK,
+ MT7621_GPIO_MODE_UART2_GPIO, MT7621_GPIO_MODE_UART2_SHIFT),
+ GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG),
+ GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK,
+ MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT),
+ GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK,
+ MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT),
+ GRP_G("mdio", mdio_grp, MT7621_GPIO_MODE_MDIO_MASK,
+ MT7621_GPIO_MODE_MDIO_GPIO, MT7621_GPIO_MODE_MDIO_SHIFT),
+ GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2),
+ GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK,
+ MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT),
+ GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK,
+ MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT),
+ GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1),
+ { 0 }
+};
+
+phys_addr_t mips_cpc_default_phys_base(void)
+{
+ panic("Cannot detect cpc address");
+}
+
+void __init ralink_clk_init(void)
+{
+ int cpu_fdiv = 0;
+ int cpu_ffrac = 0;
+ int fbdiv = 0;
+ u32 clk_sts, syscfg;
+ u8 clk_sel = 0, xtal_mode;
+ u32 cpu_clk;
+
+ if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
+ clk_sel = 1;
+
+ switch (clk_sel) {
+ case 0:
+ clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
+ cpu_fdiv = ((clk_sts >> 8) & 0x1F);
+ cpu_ffrac = (clk_sts & 0x1F);
+ cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
+ break;
+
+ case 1:
+ fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
+ syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
+ xtal_mode = (syscfg >> 6) & 0x7;
+ if (xtal_mode >= 6) {
+ /* 25Mhz Xtal */
+ cpu_clk = 25 * fbdiv * 1000 * 1000;
+ } else if (xtal_mode >= 3) {
+ /* 40Mhz Xtal */
+ cpu_clk = 40 * fbdiv * 1000 * 1000;
+ } else {
+ /* 20Mhz Xtal */
+ cpu_clk = 20 * fbdiv * 1000 * 1000;
+ }
+ break;
+ }
+}
+
+void __init ralink_of_remap(void)
+{
+ rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
+ rt_memc_membase = plat_of_remap_node("mtk,mt7621-memc");
+
+ if (!rt_sysc_membase || !rt_memc_membase)
+ panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
+ unsigned char *name = NULL;
+ u32 n0;
+ u32 n1;
+ u32 rev;
+
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+ if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
+ name = "MT7621";
+ soc_info->compatible = "mtk,mt7621-soc";
+ } else {
+ panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+ }
+
+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "MediaTek %s ver:%u eco:%u",
+ name,
+ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+ (rev & CHIP_REV_ECO_MASK));
+
+ soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
+ soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
+ soc_info->mem_base = MT7621_DRAM_BASE;
+
+ rt2880_pinmux_data = mt7621_pinmux_data;
+
+ /* Early detection of CMP support */
+ mips_cm_probe();
+ mips_cpc_probe();
+
+ if (mips_cm_numiocu()) {
+ /*
+ * mips_cm_probe() wipes out bootloader
+ * config for CM regions and we have to configure them
+ * again. This SoC cannot talk to pamlbus devices
+ * witout proper iocu region set up.
+ *
+ * FIXME: it would be better to do this with values
+ * from DT, but we need this very early because
+ * without this we cannot talk to pretty much anything
+ * including serial.
+ */
+ write_gcr_reg0_base(MT7621_PALMBUS_BASE);
+ write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE |
+ CM_GCR_REGn_MASK_CMTGT_IOCU0);
+ }
+
+ if (!register_cps_smp_ops())
+ return;
+ if (!register_cmp_smp_ops())
+ return;
+ if (!register_vsmp_smp_ops())
+ return;
+}
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
index 844f5cd55c8f..3c84166ebcb7 100644
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -119,5 +119,5 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
rt2880_pinmux_data = rt2880_pinmux_data_act;
- ralink_soc == RT2880_SOC;
+ ralink_soc = RT2880_SOC;
}
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index 9e4572592065..d7c4ba43a428 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -201,6 +201,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("cpu", cpu_rate);
ralink_clk_add("sys", sys_rate);
ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000b40.spi", sys_rate);
ralink_clk_add("10000100.timer", wdt_rate);
ralink_clk_add("10000120.watchdog", wdt_rate);
ralink_clk_add("10000500.uart", uart_rate);
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
index 582995aaaf4e..fafec947b27d 100644
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -109,6 +109,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000120.watchdog", sys_rate);
ralink_clk_add("10000500.uart", 40000000);
ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000b40.spi", sys_rate);
ralink_clk_add("10000c00.uartlite", 40000000);
ralink_clk_add("10100000.ethernet", sys_rate);
ralink_clk_add("10180000.wmac", 40000000);
diff --git a/arch/mips/ralink/timer-gic.c b/arch/mips/ralink/timer-gic.c
new file mode 100644
index 000000000000..5b4f186bcf95
--- /dev/null
+++ b/arch/mips/ralink/timer-gic.c
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+
+#include "common.h"
+
+void __init plat_time_init(void)
+{
+ ralink_of_remap();
+
+ of_clk_init(NULL);
+ clocksource_probe();
+}
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 650d5d39f34d..fd1108543a71 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -89,7 +89,7 @@ static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
struct rb532_gpio_chip *gpch;
gpch = container_of(chip, struct rb532_gpio_chip, chip);
- return rb532_get_bit(offset, gpch->regbase + GPIOD);
+ return !!rb532_get_bit(offset, gpch->regbase + GPIOD);
}
/*
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 9d9962ab7d25..2fd350f31f4b 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -689,7 +689,7 @@ static int txx9_iocled_get(struct gpio_chip *chip, unsigned int offset)
{
struct txx9_iocled_data *data =
container_of(chip, struct txx9_iocled_data, chip);
- return data->cur_val & (1 << offset);
+ return !!(data->cur_val & (1 << offset));
}
static void txx9_iocled_set(struct gpio_chip *chip, unsigned int offset,
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 11fc2a27fa2e..715923d5236c 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -130,6 +130,11 @@ config ORION_IRQCHIP
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
+config PIC32_EVIC
+ bool
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+
config RENESAS_INTC_IRQPIN
bool
select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index d4c2e4ebc308..18caacb60d58 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -58,3 +58,4 @@ obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
+obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o
diff --git a/drivers/irqchip/irq-pic32-evic.c b/drivers/irqchip/irq-pic32-evic.c
new file mode 100644
index 000000000000..e7155db01d55
--- /dev/null
+++ b/drivers/irqchip/irq-pic32-evic.c
@@ -0,0 +1,324 @@
+/*
+ * Cristian Birsan <cristian.birsan@microchip.com>
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2016 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irq.h>
+
+#include <asm/irq.h>
+#include <asm/traps.h>
+#include <asm/mach-pic32/pic32.h>
+
+#define REG_INTCON 0x0000
+#define REG_INTSTAT 0x0020
+#define REG_IFS_OFFSET 0x0040
+#define REG_IEC_OFFSET 0x00C0
+#define REG_IPC_OFFSET 0x0140
+#define REG_OFF_OFFSET 0x0540
+
+#define MAJPRI_MASK 0x07
+#define SUBPRI_MASK 0x03
+#define PRIORITY_MASK 0x1F
+
+#define PIC32_INT_PRI(pri, subpri) \
+ ((((pri) & MAJPRI_MASK) << 2) | ((subpri) & SUBPRI_MASK))
+
+struct evic_chip_data {
+ u32 irq_types[NR_IRQS];
+ u32 ext_irqs[8];
+};
+
+static struct irq_domain *evic_irq_domain;
+static void __iomem *evic_base;
+
+asmlinkage void __weak plat_irq_dispatch(void)
+{
+ unsigned int irq, hwirq;
+
+ hwirq = readl(evic_base + REG_INTSTAT) & 0xFF;
+ irq = irq_linear_revmap(evic_irq_domain, hwirq);
+ do_IRQ(irq);
+}
+
+static struct evic_chip_data *irqd_to_priv(struct irq_data *data)
+{
+ return (struct evic_chip_data *)data->domain->host_data;
+}
+
+static int pic32_set_ext_polarity(int bit, u32 type)
+{
+ /*
+ * External interrupts can be either edge rising or edge falling,
+ * but not both.
+ */
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ writel(BIT(bit), evic_base + PIC32_SET(REG_INTCON));
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ writel(BIT(bit), evic_base + PIC32_CLR(REG_INTCON));
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int pic32_set_type_edge(struct irq_data *data,
+ unsigned int flow_type)
+{
+ struct evic_chip_data *priv = irqd_to_priv(data);
+ int ret;
+ int i;
+
+ if (!(flow_type & IRQ_TYPE_EDGE_BOTH))
+ return -EBADR;
+
+ /* set polarity for external interrupts only */
+ for (i = 0; i < ARRAY_SIZE(priv->ext_irqs); i++) {
+ if (priv->ext_irqs[i] == data->hwirq) {
+ ret = pic32_set_ext_polarity(i + 1, flow_type);
+ if (ret)
+ return ret;
+ }
+ }
+
+ irqd_set_trigger_type(data, flow_type);
+
+ return IRQ_SET_MASK_OK;
+}
+
+static void pic32_bind_evic_interrupt(int irq, int set)
+{
+ writel(set, evic_base + REG_OFF_OFFSET + irq * 4);
+}
+
+static void pic32_set_irq_priority(int irq, int priority)
+{
+ u32 reg, shift;
+
+ reg = irq / 4;
+ shift = (irq % 4) * 8;
+
+ writel(PRIORITY_MASK << shift,
+ evic_base + PIC32_CLR(REG_IPC_OFFSET + reg * 0x10));
+ writel(priority << shift,
+ evic_base + PIC32_SET(REG_IPC_OFFSET + reg * 0x10));
+}
+
+#define IRQ_REG_MASK(_hwirq, _reg, _mask) \
+ do { \
+ _reg = _hwirq / 32; \
+ _mask = 1 << (_hwirq % 32); \
+ } while (0)
+
+static int pic32_irq_domain_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct evic_chip_data *priv = d->host_data;
+ struct irq_data *data;
+ int ret;
+ u32 iecclr, ifsclr;
+ u32 reg, mask;
+
+ ret = irq_map_generic_chip(d, virq, hw);
+ if (ret)
+ return ret;
+
+ /*
+ * Piggyback on xlate function to move to an alternate chip as necessary
+ * at time of mapping instead of allowing the flow handler/chip to be
+ * changed later. This requires all interrupts to be configured through
+ * DT.
+ */
+ if (priv->irq_types[hw] & IRQ_TYPE_SENSE_MASK) {
+ data = irq_domain_get_irq_data(d, virq);
+ irqd_set_trigger_type(data, priv->irq_types[hw]);
+ irq_setup_alt_chip(data, priv->irq_types[hw]);
+ }
+
+ IRQ_REG_MASK(hw, reg, mask);
+
+ iecclr = PIC32_CLR(REG_IEC_OFFSET + reg * 0x10);
+ ifsclr = PIC32_CLR(REG_IFS_OFFSET + reg * 0x10);
+
+ /* mask and clear flag */
+ writel(mask, evic_base + iecclr);
+ writel(mask, evic_base + ifsclr);
+
+ /* default priority is required */
+ pic32_set_irq_priority(hw, PIC32_INT_PRI(2, 0));
+
+ return ret;
+}
+
+int pic32_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+ struct evic_chip_data *priv = d->host_data;
+
+ if (WARN_ON(intsize < 2))
+ return -EINVAL;
+
+ if (WARN_ON(intspec[0] >= NR_IRQS))
+ return -EINVAL;
+
+ *out_hwirq = intspec[0];
+ *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+
+ priv->irq_types[intspec[0]] = intspec[1] & IRQ_TYPE_SENSE_MASK;
+
+ return 0;
+}
+
+static const struct irq_domain_ops pic32_irq_domain_ops = {
+ .map = pic32_irq_domain_map,
+ .xlate = pic32_irq_domain_xlate,
+};
+
+static void __init pic32_ext_irq_of_init(struct irq_domain *domain)
+{
+ struct device_node *node = irq_domain_get_of_node(domain);
+ struct evic_chip_data *priv = domain->host_data;
+ struct property *prop;
+ const __le32 *p;
+ u32 hwirq;
+ int i = 0;
+ const char *pname = "microchip,external-irqs";
+
+ of_property_for_each_u32(node, pname, prop, p, hwirq) {
+ if (i >= ARRAY_SIZE(priv->ext_irqs)) {
+ pr_warn("More than %d external irq, skip rest\n",
+ ARRAY_SIZE(priv->ext_irqs));
+ break;
+ }
+
+ priv->ext_irqs[i] = hwirq;
+ i++;
+ }
+}
+
+static int __init pic32_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_chip_generic *gc;
+ struct evic_chip_data *priv;
+ unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+ int nchips, ret;
+ int i;
+
+ nchips = DIV_ROUND_UP(NR_IRQS, 32);
+
+ evic_base = of_iomap(node, 0);
+ if (!evic_base)
+ return -ENOMEM;
+
+ priv = kcalloc(nchips, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ goto err_iounmap;
+ }
+
+ evic_irq_domain = irq_domain_add_linear(node, nchips * 32,
+ &pic32_irq_domain_ops,
+ priv);
+ if (!evic_irq_domain) {
+ ret = -ENOMEM;
+ goto err_free_priv;
+ }
+
+ /*
+ * The PIC32 EVIC has a linear list of irqs and the type of each
+ * irq is determined by the hardware peripheral the EVIC is arbitrating.
+ * These irq types are defined in the datasheet as "persistent" and
+ * "non-persistent" which are mapped here to level and edge
+ * respectively. To manage the different flow handler requirements of
+ * each irq type, different chip_types are used.
+ */
+ ret = irq_alloc_domain_generic_chips(evic_irq_domain, 32, 2,
+ "evic-level", handle_level_irq,
+ clr, 0, 0);
+ if (ret)
+ goto err_domain_remove;
+
+ board_bind_eic_interrupt = &pic32_bind_evic_interrupt;
+
+ for (i = 0; i < nchips; i++) {
+ u32 ifsclr = PIC32_CLR(REG_IFS_OFFSET + (i * 0x10));
+ u32 iec = REG_IEC_OFFSET + (i * 0x10);
+
+ gc = irq_get_domain_generic_chip(evic_irq_domain, i * 32);
+
+ gc->reg_base = evic_base;
+ gc->unused = 0;
+
+ /*
+ * Level/persistent interrupts have a special requirement that
+ * the condition generating the interrupt be cleared before the
+ * interrupt flag (ifs) can be cleared. chip.irq_eoi is used to
+ * complete the interrupt with an ack.
+ */
+ gc->chip_types[0].type = IRQ_TYPE_LEVEL_MASK;
+ gc->chip_types[0].handler = handle_fasteoi_irq;
+ gc->chip_types[0].regs.ack = ifsclr;
+ gc->chip_types[0].regs.mask = iec;
+ gc->chip_types[0].chip.name = "evic-level";
+ gc->chip_types[0].chip.irq_eoi = irq_gc_ack_set_bit;
+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
+ gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
+ gc->chip_types[0].chip.flags = IRQCHIP_SKIP_SET_WAKE;
+
+ /* Edge interrupts */
+ gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH;
+ gc->chip_types[1].handler = handle_edge_irq;
+ gc->chip_types[1].regs.ack = ifsclr;
+ gc->chip_types[1].regs.mask = iec;
+ gc->chip_types[1].chip.name = "evic-edge";
+ gc->chip_types[1].chip.irq_ack = irq_gc_ack_set_bit;
+ gc->chip_types[1].chip.irq_mask = irq_gc_mask_clr_bit;
+ gc->chip_types[1].chip.irq_unmask = irq_gc_mask_set_bit;
+ gc->chip_types[1].chip.irq_set_type = pic32_set_type_edge;
+ gc->chip_types[1].chip.flags = IRQCHIP_SKIP_SET_WAKE;
+
+ gc->private = &priv[i];
+ }
+
+ irq_set_default_host(evic_irq_domain);
+
+ /*
+ * External interrupts have software configurable edge polarity. These
+ * interrupts are defined in DT allowing polarity to be configured only
+ * for these interrupts when requested.
+ */
+ pic32_ext_irq_of_init(evic_irq_domain);
+
+ return 0;
+
+err_domain_remove:
+ irq_domain_remove(evic_irq_domain);
+
+err_free_priv:
+ kfree(priv);
+
+err_iounmap:
+ iounmap(evic_base);
+
+ return ret;
+}
+
+IRQCHIP_DECLARE(pic32_evic, "microchip,pic32mzda-evic", pic32_of_init);
diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c
index 440936998593..cec3188a170d 100644
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
@@ -24,6 +24,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/bcm963xx_tag.h>
#include <linux/crc32.h>
#include <linux/module.h>
#include <linux/kernel.h>
@@ -34,11 +35,8 @@
#include <linux/mtd/partitions.h>
#include <asm/mach-bcm63xx/bcm63xx_nvram.h>
-#include <asm/mach-bcm63xx/bcm963xx_tag.h>
#include <asm/mach-bcm63xx/board_bcm963xx.h>
-#define BCM63XX_EXTENDED_SIZE 0xBFC00000 /* Extended flash address */
-
#define BCM63XX_CFE_BLOCK_SIZE SZ_64K /* always at least 64KiB */
#define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
@@ -123,8 +121,8 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
pr_info("CFE boot tag found with version %s and board type %s\n",
tagversion, boardid);
- kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
- rootfsaddr = rootfsaddr - BCM63XX_EXTENDED_SIZE;
+ kerneladdr = kerneladdr - BCM963XX_EXTENDED_SIZE;
+ rootfsaddr = rootfsaddr - BCM963XX_EXTENDED_SIZE;
spareaddr = roundup(totallen, master->erasesize) + cfelen;
if (rootfsaddr < kerneladdr) {
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 3a93755e880f..051ea4809c14 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -491,6 +491,7 @@ static inline int arch_elf_pt_proc(struct elfhdr *ehdr,
* arch_check_elf() - check an ELF executable
* @ehdr: The main ELF header
* @has_interp: True if the ELF has an interpreter, else false.
+ * @interp_ehdr: The interpreter's ELF header
* @state: Architecture-specific state preserved throughout the process
* of loading the ELF.
*
@@ -502,6 +503,7 @@ static inline int arch_elf_pt_proc(struct elfhdr *ehdr,
* with that return code.
*/
static inline int arch_check_elf(struct elfhdr *ehdr, bool has_interp,
+ struct elfhdr *interp_ehdr,
struct arch_elf_state *state)
{
/* Dummy implementation, always proceed */
@@ -829,7 +831,9 @@ static int load_elf_binary(struct linux_binprm *bprm)
* still possible to return an error to the code that invoked
* the exec syscall.
*/
- retval = arch_check_elf(&loc->elf_ex, !!interpreter, &arch_state);
+ retval = arch_check_elf(&loc->elf_ex,
+ !!interpreter, &loc->interp_elf_ex,
+ &arch_state);
if (retval)
goto out_free_dentry;
diff --git a/include/linux/bcm963xx_nvram.h b/include/linux/bcm963xx_nvram.h
new file mode 100644
index 000000000000..290c231b8cf1
--- /dev/null
+++ b/include/linux/bcm963xx_nvram.h
@@ -0,0 +1,112 @@
+#ifndef __LINUX_BCM963XX_NVRAM_H__
+#define __LINUX_BCM963XX_NVRAM_H__
+
+#include <linux/crc32.h>
+#include <linux/if_ether.h>
+#include <linux/sizes.h>
+#include <linux/types.h>
+
+/*
+ * Broadcom BCM963xx SoC board nvram data structure.
+ *
+ * The nvram structure varies in size depending on the SoC board version. Use
+ * the appropriate minimum BCM963XX_NVRAM_*_SIZE define for the information
+ * you need instead of sizeof(struct bcm963xx_nvram) as this may change.
+ */
+
+#define BCM963XX_NVRAM_V4_SIZE 300
+#define BCM963XX_NVRAM_V5_SIZE (1 * SZ_1K)
+
+#define BCM963XX_DEFAULT_PSI_SIZE 64
+
+enum bcm963xx_nvram_nand_part {
+ BCM963XX_NVRAM_NAND_PART_BOOT = 0,
+ BCM963XX_NVRAM_NAND_PART_ROOTFS_1,
+ BCM963XX_NVRAM_NAND_PART_ROOTFS_2,
+ BCM963XX_NVRAM_NAND_PART_DATA,
+ BCM963XX_NVRAM_NAND_PART_BBT,
+
+ __BCM963XX_NVRAM_NAND_NR_PARTS
+};
+
+struct bcm963xx_nvram {
+ u32 version;
+ char bootline[256];
+ char name[16];
+ u32 main_tp_number;
+ u32 psi_size;
+ u32 mac_addr_count;
+ u8 mac_addr_base[ETH_ALEN];
+ u8 __reserved1[2];
+ u32 checksum_v4;
+
+ u8 __reserved2[292];
+ u32 nand_part_offset[__BCM963XX_NVRAM_NAND_NR_PARTS];
+ u32 nand_part_size[__BCM963XX_NVRAM_NAND_NR_PARTS];
+ u8 __reserved3[388];
+ u32 checksum_v5;
+};
+
+#define BCM963XX_NVRAM_NAND_PART_OFFSET(nvram, part) \
+ bcm963xx_nvram_nand_part_offset(nvram, BCM963XX_NVRAM_NAND_PART_ ##part)
+
+static inline u64 __pure bcm963xx_nvram_nand_part_offset(
+ const struct bcm963xx_nvram *nvram,
+ enum bcm963xx_nvram_nand_part part)
+{
+ return nvram->nand_part_offset[part] * SZ_1K;
+}
+
+#define BCM963XX_NVRAM_NAND_PART_SIZE(nvram, part) \
+ bcm963xx_nvram_nand_part_size(nvram, BCM963XX_NVRAM_NAND_PART_ ##part)
+
+static inline u64 __pure bcm963xx_nvram_nand_part_size(
+ const struct bcm963xx_nvram *nvram,
+ enum bcm963xx_nvram_nand_part part)
+{
+ return nvram->nand_part_size[part] * SZ_1K;
+}
+
+/*
+ * bcm963xx_nvram_checksum - Verify nvram checksum
+ *
+ * @nvram: pointer to full size nvram data structure
+ * @expected_out: optional pointer to store expected checksum value
+ * @actual_out: optional pointer to store actual checksum value
+ *
+ * Return: 0 if the checksum is valid, otherwise -EINVAL
+ */
+static int __maybe_unused bcm963xx_nvram_checksum(
+ const struct bcm963xx_nvram *nvram,
+ u32 *expected_out, u32 *actual_out)
+{
+ u32 expected, actual;
+ size_t len;
+
+ if (nvram->version <= 4) {
+ expected = nvram->checksum_v4;
+ len = BCM963XX_NVRAM_V4_SIZE - sizeof(u32);
+ } else {
+ expected = nvram->checksum_v5;
+ len = BCM963XX_NVRAM_V5_SIZE - sizeof(u32);
+ }
+
+ /*
+ * Calculate the CRC32 value for the nvram with a checksum value
+ * of 0 without modifying or copying the nvram by combining:
+ * - The CRC32 of the nvram without the checksum value
+ * - The CRC32 of a zero checksum value (which is also 0)
+ */
+ actual = crc32_le_combine(
+ crc32_le(~0, (u8 *)nvram, len), 0, sizeof(u32));
+
+ if (expected_out)
+ *expected_out = expected;
+
+ if (actual_out)
+ *actual_out = actual;
+
+ return expected == actual ? 0 : -EINVAL;
+};
+
+#endif /* __LINUX_BCM963XX_NVRAM_H__ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h b/include/linux/bcm963xx_tag.h
index 1e6b587f62c9..161c7b37a77b 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
+++ b/include/linux/bcm963xx_tag.h
@@ -1,5 +1,7 @@
-#ifndef __BCM963XX_TAG_H
-#define __BCM963XX_TAG_H
+#ifndef __LINUX_BCM963XX_TAG_H__
+#define __LINUX_BCM963XX_TAG_H__
+
+#include <linux/types.h>
#define TAGVER_LEN 4 /* Length of Tag Version */
#define TAGLAYOUT_LEN 4 /* Length of FlashLayoutVer */
@@ -10,8 +12,7 @@
#define CHIPID_LEN 6 /* Chip Id Length */
#define IMAGE_LEN 10 /* Length of Length Field */
#define ADDRESS_LEN 12 /* Length of Address field */
-#define DUALFLAG_LEN 2 /* Dual Image flag Length */
-#define INACTIVEFLAG_LEN 2 /* Inactie Flag Length */
+#define IMAGE_SEQUENCE_LEN 4 /* Image sequence Length */
#define RSASIG_LEN 20 /* Length of RSA Signature in tag */
#define TAGINFO1_LEN 30 /* Length of vendor information field1 in tag */
#define FLASHLAYOUTVER_LEN 4 /* Length of Flash Layout Version String tag */
@@ -26,6 +27,11 @@
"DWV-S0", \
}
+/* Extended flash address, needs to be subtracted
+ * from bcm_tag flash image offsets.
+ */
+#define BCM963XX_EXTENDED_SIZE 0xBFC00000
+
/*
* The broadcom firmware assumes the rootfs starts the image,
* therefore uses the rootfs start (flash_image_address)
@@ -65,10 +71,10 @@ struct bcm_tag {
char kernel_address[ADDRESS_LEN];
/* 128-137: Size of kernel */
char kernel_length[IMAGE_LEN];
- /* 138-139: Unused at the moment */
- char dual_image[DUALFLAG_LEN];
- /* 140-141: Unused at the moment */
- char inactive_flag[INACTIVEFLAG_LEN];
+ /* 138-141: Image sequence number
+ * (to be incremented when flashed with a new image)
+ */
+ char image_sequence[IMAGE_SEQUENCE_LEN];
/* 142-161: RSA Signature (not used; some vendors may use this) */
char rsa_signature[RSASIG_LEN];
/* 162-191: Compilation and related information (not used in OpenWrt) */
@@ -93,4 +99,4 @@ struct bcm_tag {
char reserved2[16];
};
-#endif /* __BCM63XX_TAG_H */
+#endif /* __LINUX_BCM63XX_TAG_H__ */
diff --git a/include/linux/platform_data/sdhci-pic32.h b/include/linux/platform_data/sdhci-pic32.h
new file mode 100644
index 000000000000..7e0efe64c8c5
--- /dev/null
+++ b/include/linux/platform_data/sdhci-pic32.h
@@ -0,0 +1,22 @@
+/*
+ * Purna Chandra Mandal, purna.mandal@microchip.com
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef __PIC32_SDHCI_PDATA_H__
+#define __PIC32_SDHCI_PDATA_H__
+
+struct pic32_sdhci_platform_data {
+ /* read & write fifo threshold */
+ int (*setup_dma)(u32 rfifo, u32 wfifo);
+};
+
+#endif