From 058d23168752c2a2ec0a6c3b50296cb5b91ec6d0 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Wed, 4 Mar 2015 13:13:05 +0100 Subject: board/seco: Add mx6q-uq7 basic board support Add basic SECO MX6Q/uQ7 board support (Ethernet, UART, SD are supported). It also adds a Kconfig skeleton to later add more SECO board (supporting SoC and board variants). Signed-off-by: Boris Brezillon --- configs/secomx6quq7_defconfig | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 configs/secomx6quq7_defconfig (limited to 'configs') diff --git a/configs/secomx6quq7_defconfig b/configs/secomx6quq7_defconfig new file mode 100644 index 0000000000..dcd681dfb7 --- /dev/null +++ b/configs/secomx6quq7_defconfig @@ -0,0 +1,7 @@ +CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC" +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_TARGET_SECOMX6=y +CONFIG_SECOMX6_UQ7=y +CONFIG_SECOMX6Q=y +CONFIG_SECOMX6_2GB=y -- cgit v1.2.3 From b02d9acb3c38033e2803fdb81a5c067e6ae841a7 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Tue, 10 Mar 2015 15:33:24 +0800 Subject: imx:mx6dlsabresd fix error detecting thermal Before add CONFIG_SYS_MALLOC_F and CONFIG_SYS_MALLOC_F_LEN, uboot will complains "CPU: Temperature: Can't find sensor device". This is because DM and DM_THERMAL are enabled, but SYS_MALLOC_F is not configured. After applying this patch, uboot can correctly detect the temperature. " U-Boot 2015.04-rc2-00146-g48b6e30-dirty (Mar 09 2015 - 13:04:36) CPU: Freescale i.MX6DL rev1.1 at 792 MHz CPU: Temperature 44 C " Signed-off-by: Peng Fan --- configs/mx6dlsabresd_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'configs') diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig index 6adfd55708..cde0d705a5 100644 --- a/configs/mx6dlsabresd_defconfig +++ b/configs/mx6dlsabresd_defconfig @@ -1,5 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL" CONFIG_ARM=y CONFIG_TARGET_MX6SABRESD=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_DM=y CONFIG_DM_THERMAL=y -- cgit v1.2.3 From 27d3608076b37f372b9ba59e1eb00114291d6558 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Tue, 10 Mar 2015 15:33:25 +0800 Subject: imx:mx6slevk support reading temperature This patch is to support reading temperature for mx6slevk board. Signed-off-by: Peng Fan --- configs/mx6slevk_defconfig | 4 ++++ configs/mx6slevk_spinor_defconfig | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'configs') diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index fb8c4decfd..c6b3108d75 100644 --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -1,3 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL" CONFIG_ARM=y CONFIG_TARGET_MX6SLEVK=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig index 93efe73014..454cb400b5 100644 --- a/configs/mx6slevk_spinor_defconfig +++ b/configs/mx6slevk_spinor_defconfig @@ -1,3 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_BOOT_SPINOR" CONFIG_ARM=y CONFIG_TARGET_MX6SLEVK=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y -- cgit v1.2.3