From 42dfe7a1844cbad7114038aaf03828acb7a84414 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 14 Mar 2004 22:25:36 +0000 Subject: Code cleanup; make several boards compile & link. --- CHANGELOG | 2 +- Makefile | 18 +- board/cogent/mb.c | 2 +- board/csb272/csb272.c | 1 - board/dave/B2/flash.c | 3 - board/dave/B2/u-boot.lds | 4 +- board/emk/common/flash.c | 2 +- board/emk/top5200/top5200.c | 2 +- board/gcplus/flash.c | 2 +- board/icecube/icecube.c | 2 +- board/integratorap/config.mk | 2 +- board/integratorap/integratorap.c | 468 ++++++++++++++++++++------------------ board/integratorap/u-boot.lds | 4 +- board/integratorcp/config.mk | 2 +- board/integratorcp/integratorcp.c | 1 - board/integratorcp/u-boot.lds | 4 +- board/mpl/common/common_util.c | 2 +- board/ocotea/ocotea.c | 1 - board/siemens/CCM/ccm.c | 8 +- board/siemens/pcu_e/pcu_e.c | 10 +- board/ssv/common/cmd_sled.c | 32 +-- board/trab/trab_fkt.c | 4 +- board/versatile/config.mk | 2 +- board/versatile/u-boot.lds | 4 +- board/versatile/versatile.c | 1 - common/cmd_ide.c | 46 ++-- common/devices.c | 2 +- cpu/arm920t/serial.c | 34 +-- cpu/arm926ejs/interrupts.c | 2 +- cpu/i386/serial.c | 10 +- cpu/mpc5xxx/ide.c | 2 +- cpu/ppc4xx/405gp_pci.c | 2 +- cpu/ppc4xx/cpu.c | 10 +- cpu/ppc4xx/serial.c | 6 +- cpu/ppc4xx/speed.c | 2 +- cpu/s3c44b0/start.S | 19 +- cpu/sa1100/serial.c | 8 +- disk/part.c | 8 +- doc/README.adnpesc1 | 4 +- drivers/cs8900.h | 2 +- drivers/pci.c | 2 +- drivers/serial_pl010.c | 189 ++++++++------- drivers/serial_pl011.c | 174 +++++++------- drivers/serial_pl011.h | 20 +- drivers/smc91111.c | 74 +++--- drivers/usbtty.c | 2 +- include/ata.h | 2 +- include/common.h | 4 +- include/configs/MPC8266ADS.h | 4 +- include/configs/OCOTEA.h | 62 ++--- include/configs/TOP860.h | 2 +- include/configs/gcplus.h | 4 +- include/configs/integratorap.h | 51 +++-- include/configs/integratorcp.h | 3 +- include/configs/ppmc8260.h | 4 +- include/configs/sacsng.h | 4 +- include/configs/sbc8260.h | 4 +- include/configs/versatile.h | 13 +- include/ide.h | 2 +- include/part.h | 51 +++-- lib_generic/vsprintf.c | 8 +- lib_i386/board.c | 2 +- lib_m68k/board.c | 2 +- lib_ppc/board.c | 2 +- 64 files changed, 724 insertions(+), 701 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index fb6cebb548..44f6f609f9 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -14,7 +14,7 @@ Changes for U-Boot 1.0.2: * Patch by Leon Kukovec, 12 Mar 2004: Fix get_dentfromdir() to correctly handle deleted dentries - + * Patch by George G. Davis, 11 Mar 2004: Remove hard coded network settings in TI OMAP1610 H2 default board config diff --git a/Makefile b/Makefile index 1f13c77354..605a19ad22 100644 --- a/Makefile +++ b/Makefile @@ -1144,17 +1144,17 @@ ADNPESC1_base_32_config \ ADNPESC1_config: unconfig @ >include/config.h @[ -z "$(findstring _DNPEVA2,$@)" ] || \ - { echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \ - echo "... DNP/EVA2 configuration" ; \ - } + { echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \ + echo "... DNP/EVA2 configuration" ; \ + } @[ -z "$(findstring _base_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ - echo "... NIOS 'base_32' configuration" ; \ - } + { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ + echo "... NIOS 'base_32' configuration" ; \ + } @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ - echo "... NIOS 'base_32' configuration (DEFAULT)" ; \ - } + { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ + echo "... NIOS 'base_32' configuration (DEFAULT)" ; \ + } @./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv diff --git a/board/cogent/mb.c b/board/cogent/mb.c index e84c7ddb92..917132b3fb 100644 --- a/board/cogent/mb.c +++ b/board/cogent/mb.c @@ -235,7 +235,7 @@ int misc_init_f (void) long int initdram (int board_type) { -#if CONFIG_CMA111 +#ifdef CONFIG_CMA111 return (32L * 1024L * 1024L); #else unsigned char dipsw_val; diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c index 120cde7ce9..fecd7e8ef3 100644 --- a/board/csb272/csb272.c +++ b/board/csb272/csb272.c @@ -171,4 +171,3 @@ int last_stage_init(void) return 0; /* success */ } - diff --git a/board/dave/B2/flash.c b/board/dave/B2/flash.c index 50aa6aaadc..ad67e865b3 100644 --- a/board/dave/B2/flash.c +++ b/board/dave/B2/flash.c @@ -45,9 +45,6 @@ unsigned long flash_init (void) #else unsigned long size_b0; int i; - uint pbcr; - unsigned long base_b0; - int size_val = 0; /* Init: no FLASHes known */ for (i=0; iconfig cycle, 0=>A1=A0=0 */ \ - __devicebit = (1 << (__dev + 11)); \ + if (__bus == 0) { \ + /* local bus segment so need a type 0 config cycle */ \ + /* build the PCI configuration "address" with one-hot in A31-A11 */ \ + __address = PCI_CONFIG_BASE; \ + __address |= ((__devfn & 0x07) << 8); \ + __address |= __offset & 0xFF; \ + __mapaddress = 0x000A; /* 101=>config cycle, 0=>A1=A0=0 */ \ + __devicebit = (1 << (__dev + 11)); \ \ - if ((__devicebit & 0xFF000000) != 0) { \ - /* high order bits are handled by the MAP register */ \ - __mapaddress |= (__devicebit >> 16); \ - } else { \ - /* low order bits handled directly in the address */ \ - __address |= __devicebit; \ - } \ - } else { /* bus !=0 */ \ - /* not the local bus segment so need a type 1 config cycle */ \ - /* A31-A24 are don't care (so clear to 0) */ \ - __mapaddress = 0x000B; /* 101=>config cycle, 1=>A1&A0 from PCI_CFG */ \ - __address = PCI_CONFIG_BASE; \ - __address |= ((__bus & 0xFF) << 16); /* bits 23..16 = bus number */ \ - __address |= ((__dev & 0x1F) << 11); /* bits 15..11 = device number */ \ - __address |= ((__devfn & 0x07) << 8); /* bits 10..8 = function number*/ \ - __address |= __offset & 0xFF; /* bits 7..0 = register number*/ \ - } \ - _V3Write16(V3_LB_MAP1, __mapaddress); \ + if ((__devicebit & 0xFF000000) != 0) { \ + /* high order bits are handled by the MAP register */ \ + __mapaddress |= (__devicebit >> 16); \ + } else { \ + /* low order bits handled directly in the address */ \ + __address |= __devicebit; \ + } \ + } else { /* bus !=0 */ \ + /* not the local bus segment so need a type 1 config cycle */ \ + /* A31-A24 are don't care (so clear to 0) */ \ + __mapaddress = 0x000B; /* 101=>config cycle, 1=>A1&A0 from PCI_CFG */ \ + __address = PCI_CONFIG_BASE; \ + __address |= ((__bus & 0xFF) << 16); /* bits 23..16 = bus number */ \ + __address |= ((__dev & 0x1F) << 11); /* bits 15..11 = device number */ \ + __address |= ((__devfn & 0x07) << 8); /* bits 10..8 = function number */ \ + __address |= __offset & 0xFF; /* bits 7..0 = register number */ \ + } \ + _V3Write16 (V3_LB_MAP1, __mapaddress); \ + __address; \ +}) + +/* _V3OpenConfigWindow - open V3 configuration window */ +#define _V3OpenConfigWindow() { \ + /* Set up base0 to see all 512Mbytes of memory space (not */ \ + /* prefetchable), this frees up base1 for re-use by configuration*/ \ + /* memory */ \ \ - __address; \ - }) - -// _V3OpenConfigWindow - open V3 configuration window -#define _V3OpenConfigWindow() \ - { \ - /* Set up base0 to see all 512Mbytes of memory space (not */ \ - /* prefetchable), this frees up base1 for re-use by configuration*/ \ - /* memory */ \ - \ - _V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) | \ - 0x90 | V3_LB_BASE_M_ENABLE)); \ - /* Set up base1 to point into configuration space, note that MAP1 */ \ - /* register is set up by pciMakeConfigAddress(). */ \ - \ - _V3Write32 (V3_LB_BASE1, ((CPU_PCI_CNFG_ADRS & 0xFFF00000) | \ - 0x40 | V3_LB_BASE_M_ENABLE)); \ - } - -// _V3CloseConfigWindow - close V3 configuration window -#define _V3CloseConfigWindow() \ - { \ - /* Reassign base1 for use by prefetchable PCI memory */ \ - _V3Write32 (V3_LB_BASE1, (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) \ - | 0x84 | V3_LB_BASE_M_ENABLE)); \ - _V3Write16 (V3_LB_MAP1, \ - (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) >> 16) | 0x0006); \ - \ - /* And shrink base0 back to a 256M window (NOTE: MAP0 already correct) */ \ - \ - _V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) | \ - 0x80 | V3_LB_BASE_M_ENABLE)); \ - } + _V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) | \ + 0x90 | V3_LB_BASE_M_ENABLE)); \ + /* Set up base1 to point into configuration space, note that MAP1 */ \ + /* register is set up by pciMakeConfigAddress(). */ \ + \ + _V3Write32 (V3_LB_BASE1, ((CPU_PCI_CNFG_ADRS & 0xFFF00000) | \ + 0x40 | V3_LB_BASE_M_ENABLE)); \ +} +/* _V3CloseConfigWindow - close V3 configuration window */ +#define _V3CloseConfigWindow() { \ + /* Reassign base1 for use by prefetchable PCI memory */ \ + _V3Write32 (V3_LB_BASE1, (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) \ + | 0x84 | V3_LB_BASE_M_ENABLE)); \ + _V3Write16 (V3_LB_MAP1, \ + (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) >> 16) | 0x0006); \ + \ + /* And shrink base0 back to a 256M window (NOTE: MAP0 already correct) */ \ + \ + _V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) | \ + 0x80 | V3_LB_BASE_M_ENABLE)); \ +} -static int pci_integrator_read_byte(struct pci_controller *hose, pci_dev_t dev, - int offset, unsigned char *val) +static int pci_integrator_read_byte (struct pci_controller *hose, pci_dev_t dev, + int offset, unsigned char *val) { - _V3OpenConfigWindow(); - *val = *(volatile unsigned char *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), offset); - _V3CloseConfigWindow(); + _V3OpenConfigWindow (); + *val = *(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev), + PCI_FUNC (dev), + offset); + _V3CloseConfigWindow (); - return 0; + return 0; } -static int pci_integrator_read__word(struct pci_controller *hose, pci_dev_t dev, - int offset, unsigned short *val) +static int pci_integrator_read__word (struct pci_controller *hose, + pci_dev_t dev, int offset, + unsigned short *val) { - _V3OpenConfigWindow(); - *val = *(volatile unsigned short *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), offset); - _V3CloseConfigWindow(); + _V3OpenConfigWindow (); + *val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev), + PCI_FUNC (dev), + offset); + _V3CloseConfigWindow (); - return 0; + return 0; } -static int pci_integrator_read_dword(struct pci_controller *hose, pci_dev_t dev, - int offset, unsigned int *val) +static int pci_integrator_read_dword (struct pci_controller *hose, + pci_dev_t dev, int offset, + unsigned int *val) { - _V3OpenConfigWindow(); - *val = *(volatile unsigned short *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), offset); - *val |= (*(volatile unsigned int *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), (offset+2))) << 16; - _V3CloseConfigWindow(); + _V3OpenConfigWindow (); + *val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev), + PCI_FUNC (dev), + offset); + *val |= (*(volatile unsigned int *) + PCI_CONFIG_ADDRESS (PCI_BUS (dev), PCI_FUNC (dev), + (offset + 2))) << 16; + _V3CloseConfigWindow (); - return 0; + return 0; } -static int pci_integrator_write_byte(struct pci_controller *hose, pci_dev_t dev, - int offset, unsigned char val) +static int pci_integrator_write_byte (struct pci_controller *hose, + pci_dev_t dev, int offset, + unsigned char val) { - _V3OpenConfigWindow(); - *(volatile unsigned char *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), offset) = val; - _V3CloseConfigWindow(); + _V3OpenConfigWindow (); + *(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev), + PCI_FUNC (dev), + offset) = val; + _V3CloseConfigWindow (); - return 0; + return 0; } -static int pci_integrator_write_word(struct pci_controller *hose, pci_dev_t dev, - int offset,unsigned short val) +static int pci_integrator_write_word (struct pci_controller *hose, + pci_dev_t dev, int offset, + unsigned short val) { - _V3OpenConfigWindow(); - *(volatile unsigned short *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), offset) = val; - _V3CloseConfigWindow(); + _V3OpenConfigWindow (); + *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev), + PCI_FUNC (dev), + offset) = val; + _V3CloseConfigWindow (); - return 0; + return 0; } -static int pci_integrator_write_dword(struct pci_controller *hose, pci_dev_t dev, - int offset, unsigned int val) +static int pci_integrator_write_dword (struct pci_controller *hose, + pci_dev_t dev, int offset, + unsigned int val) { - _V3OpenConfigWindow(); - *(volatile unsigned short *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), offset) = (val & 0xFFFF); - *(volatile unsigned short *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), (offset + 2)) = ((val >> 16) & 0xFFFF); - _V3CloseConfigWindow(); + _V3OpenConfigWindow (); + *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev), + PCI_FUNC (dev), + offset) = (val & 0xFFFF); + *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev), + PCI_FUNC (dev), + (offset + 2)) = ((val >> 16) & 0xFFFF); + _V3CloseConfigWindow (); - return 0; + return 0; } - /****************************** * PCI initialisation ******************************/ @@ -255,176 +270,184 @@ struct pci_controller integrator_hose = { #endif }; -void pci_init_board(void) +void pci_init_board (void) { - volatile int i, j; - struct pci_controller *hose = &integrator_hose; + volatile int i, j; + struct pci_controller *hose = &integrator_hose; - /* setting this register will take the V3 out of reset */ + /* setting this register will take the V3 out of reset */ - *(volatile unsigned int *)(INTEGRATOR_SC_PCIENABLE) = 1; + *(volatile unsigned int *) (INTEGRATOR_SC_PCIENABLE) = 1; - /* wait a few usecs to settle the device and the PCI bus */ + /* wait a few usecs to settle the device and the PCI bus */ - for (i = 0; i < 100 ; i++) - j = i + 1; + for (i = 0; i < 100; i++) + j = i + 1; - /* Now write the Base I/O Address Word to V3_BASE + 0x6C */ + /* Now write the Base I/O Address Word to V3_BASE + 0x6C */ - *(volatile unsigned short *)(V3_BASE + V3_LB_IO_BASE) = (unsigned short)(V3_BASE >> 16); + *(volatile unsigned short *) (V3_BASE + V3_LB_IO_BASE) = + (unsigned short) (V3_BASE >> 16); - do { - *(volatile unsigned char *)(V3_BASE + V3_MAIL_DATA) = 0xAA; - *(volatile unsigned char *)(V3_BASE + V3_MAIL_DATA + 4) = 0x55; - } while (*(volatile unsigned char *)(V3_BASE + V3_MAIL_DATA) != 0xAA || - *(volatile unsigned char *)(V3_BASE + V3_MAIL_DATA + 4) != 0x55); + do { + *(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) = 0xAA; + *(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA + 4) = + 0x55; + } while (*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) != 0xAA + || *(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA + + 4) != 0x55); - /* Make sure that V3 register access is not locked, if it is, unlock it */ + /* Make sure that V3 register access is not locked, if it is, unlock it */ - if ((*(volatile unsigned short *)(V3_BASE + V3_SYSTEM) & V3_SYSTEM_M_LOCK) - == V3_SYSTEM_M_LOCK) - *(volatile unsigned short *)(V3_BASE + V3_SYSTEM) = 0xA05F; + if ((*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) & + V3_SYSTEM_M_LOCK) + == V3_SYSTEM_M_LOCK) + *(volatile unsigned short *) (V3_BASE + V3_SYSTEM) = 0xA05F; - /* Ensure that the slave accesses from PCI are disabled while we */ - /* setup windows */ + /* Ensure that the slave accesses from PCI are disabled while we */ + /* setup windows */ - *(volatile unsigned short *)(V3_BASE + V3_PCI_CMD) &= - ~(V3_COMMAND_M_MEM_EN | V3_COMMAND_M_IO_EN); + *(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) &= + ~(V3_COMMAND_M_MEM_EN | V3_COMMAND_M_IO_EN); - /* Clear RST_OUT to 0; keep the PCI bus in reset until we've finished */ + /* Clear RST_OUT to 0; keep the PCI bus in reset until we've finished */ - *(volatile unsigned short *)(V3_BASE + V3_SYSTEM) &= ~V3_SYSTEM_M_RST_OUT; + *(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &= + ~V3_SYSTEM_M_RST_OUT; - /* Make all accesses from PCI space retry until we're ready for them */ + /* Make all accesses from PCI space retry until we're ready for them */ - *(volatile unsigned short *)(V3_BASE + V3_PCI_CFG) |= V3_PCI_CFG_M_RETRY_EN; + *(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) |= + V3_PCI_CFG_M_RETRY_EN; - /* Set up any V3 PCI Configuration Registers that we absolutely have to */ - /* LB_CFG controls Local Bus protocol. */ - /* Enable LocalBus byte strobes for READ accesses too. */ - /* set bit 7 BE_IMODE and bit 6 BE_OMODE */ + /* Set up any V3 PCI Configuration Registers that we absolutely have to */ + /* LB_CFG controls Local Bus protocol. */ + /* Enable LocalBus byte strobes for READ accesses too. */ + /* set bit 7 BE_IMODE and bit 6 BE_OMODE */ - *(volatile unsigned short *)(V3_BASE + V3_LB_CFG) |= 0x0C0; + *(volatile unsigned short *) (V3_BASE + V3_LB_CFG) |= 0x0C0; - /* PCI_CMD controls overall PCI operation. */ - /* Enable PCI bus master. */ + /* PCI_CMD controls overall PCI operation. */ + /* Enable PCI bus master. */ - *(volatile unsigned short *)(V3_BASE + V3_PCI_CMD) |= 0x04; + *(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) |= 0x04; - /* PCI_MAP0 controls where the PCI to CPU memory window is on Local Bus*/ + /* PCI_MAP0 controls where the PCI to CPU memory window is on Local Bus */ - *(volatile unsigned int *)(V3_BASE + V3_PCI_MAP0) = (INTEGRATOR_BOOT_ROM_BASE) | - (V3_PCI_MAP_M_ADR_SIZE_512M | - V3_PCI_MAP_M_REG_EN | - V3_PCI_MAP_M_ENABLE); + *(volatile unsigned int *) (V3_BASE + V3_PCI_MAP0) = + (INTEGRATOR_BOOT_ROM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_512M | + V3_PCI_MAP_M_REG_EN | + V3_PCI_MAP_M_ENABLE); - /* PCI_BASE0 is the PCI address of the start of the window */ + /* PCI_BASE0 is the PCI address of the start of the window */ - *(volatile unsigned int *)(V3_BASE + V3_PCI_BASE0) = INTEGRATOR_BOOT_ROM_BASE; + *(volatile unsigned int *) (V3_BASE + V3_PCI_BASE0) = + INTEGRATOR_BOOT_ROM_BASE; - /* PCI_MAP1 is LOCAL address of the start of the window */ + /* PCI_MAP1 is LOCAL address of the start of the window */ - *(volatile unsigned int *)(V3_BASE + V3_PCI_MAP1) = (INTEGRATOR_HDR0_SDRAM_BASE) | - (V3_PCI_MAP_M_ADR_SIZE_1024M | V3_PCI_MAP_M_REG_EN | - V3_PCI_MAP_M_ENABLE); + *(volatile unsigned int *) (V3_BASE + V3_PCI_MAP1) = + (INTEGRATOR_HDR0_SDRAM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_1024M | + V3_PCI_MAP_M_REG_EN | + V3_PCI_MAP_M_ENABLE); - /* PCI_BASE1 is the PCI address of the start of the window */ + /* PCI_BASE1 is the PCI address of the start of the window */ - *(volatile unsigned int *)(V3_BASE + V3_PCI_BASE1) = INTEGRATOR_HDR0_SDRAM_BASE; + *(volatile unsigned int *) (V3_BASE + V3_PCI_BASE1) = + INTEGRATOR_HDR0_SDRAM_BASE; - /* Set up the windows from local bus memory into PCI configuration, */ - /* I/O and Memory. */ - /* PCI I/O, LB_BASE2 and LB_MAP2 are used exclusively for this. */ + /* Set up the windows from local bus memory into PCI configuration, */ + /* I/O and Memory. */ + /* PCI I/O, LB_BASE2 and LB_MAP2 are used exclusively for this. */ - *(volatile unsigned short *)(V3_BASE +V3_LB_BASE2) = - ((CPU_PCI_IO_ADRS >> 24) << 8) | V3_LB_BASE_M_ENABLE; - *(volatile unsigned short *)(V3_BASE + V3_LB_MAP2) = 0; + *(volatile unsigned short *) (V3_BASE + V3_LB_BASE2) = + ((CPU_PCI_IO_ADRS >> 24) << 8) | V3_LB_BASE_M_ENABLE; + *(volatile unsigned short *) (V3_BASE + V3_LB_MAP2) = 0; - /* PCI Configuration, use LB_BASE1/LB_MAP1. */ + /* PCI Configuration, use LB_BASE1/LB_MAP1. */ - /* PCI Memory use LB_BASE0/LB_MAP0 and LB_BASE1/LB_MAP1 */ - /* Map first 256Mbytes as non-prefetchable via BASE0/MAP0 */ - /* (INTEGRATOR_PCI_BASE == PCI_MEM_BASE) */ + /* PCI Memory use LB_BASE0/LB_MAP0 and LB_BASE1/LB_MAP1 */ + /* Map first 256Mbytes as non-prefetchable via BASE0/MAP0 */ + /* (INTEGRATOR_PCI_BASE == PCI_MEM_BASE) */ - *(volatile unsigned int *)(V3_BASE + V3_LB_BASE0) = - INTEGRATOR_PCI_BASE | (0x80 | V3_LB_BASE_M_ENABLE); + *(volatile unsigned int *) (V3_BASE + V3_LB_BASE0) = + INTEGRATOR_PCI_BASE | (0x80 | V3_LB_BASE_M_ENABLE); - *(volatile unsigned short *)(V3_BASE + V3_LB_MAP0) = - ((INTEGRATOR_PCI_BASE >> 20) << 0x4) | 0x0006; + *(volatile unsigned short *) (V3_BASE + V3_LB_MAP0) = + ((INTEGRATOR_PCI_BASE >> 20) << 0x4) | 0x0006; - /* Map second 256 Mbytes as prefetchable via BASE1/MAP1 */ + /* Map second 256 Mbytes as prefetchable via BASE1/MAP1 */ - *(volatile unsigned int *)(V3_BASE + V3_LB_BASE1) = - INTEGRATOR_PCI_BASE | (0x84 | V3_LB_BASE_M_ENABLE); + *(volatile unsigned int *) (V3_BASE + V3_LB_BASE1) = + INTEGRATOR_PCI_BASE | (0x84 | V3_LB_BASE_M_ENABLE); - *(volatile unsigned short *)(V3_BASE + V3_LB_MAP1) = - (((INTEGRATOR_PCI_BASE + 0x10000000) >> 20) << 4) | 0x0006; + *(volatile unsigned short *) (V3_BASE + V3_LB_MAP1) = + (((INTEGRATOR_PCI_BASE + 0x10000000) >> 20) << 4) | 0x0006; - /* Allow accesses to PCI Configuration space */ - /* and set up A1, A0 for type 1 config cycles */ + /* Allow accesses to PCI Configuration space */ + /* and set up A1, A0 for type 1 config cycles */ - *(volatile unsigned short *)(V3_BASE + V3_PCI_CFG) = - ((*(volatile unsigned short *)(V3_BASE + V3_PCI_CFG)) & - ~(V3_PCI_CFG_M_RETRY_EN | V3_PCI_CFG_M_AD_LOW1) ) | - V3_PCI_CFG_M_AD_LOW0; + *(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) = + ((*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG)) & + ~(V3_PCI_CFG_M_RETRY_EN | V3_PCI_CFG_M_AD_LOW1)) | + V3_PCI_CFG_M_AD_LOW0; - /* now we can allow in PCI MEMORY accesses */ + /* now we can allow in PCI MEMORY accesses */ - *(volatile unsigned short *)(V3_BASE + V3_PCI_CMD) = - (*(volatile unsigned short *)(V3_BASE + V3_PCI_CMD)) | V3_COMMAND_M_MEM_EN; + *(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) = + (*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD)) | + V3_COMMAND_M_MEM_EN; - /* Set RST_OUT to take the PCI bus is out of reset, PCI devices can */ - /* initialise and lock the V3 system register so that no one else */ - /* can play with it */ + /* Set RST_OUT to take the PCI bus is out of reset, PCI devices can */ + /* initialise and lock the V3 system register so that no one else */ + /* can play with it */ - *(volatile unsigned short *)(V3_BASE + V3_SYSTEM) = - (*(volatile unsigned short *)(V3_BASE + V3_SYSTEM)) | V3_SYSTEM_M_RST_OUT; + *(volatile unsigned short *) (V3_BASE + V3_SYSTEM) = + (*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) | + V3_SYSTEM_M_RST_OUT; - *(volatile unsigned short *)(V3_BASE + V3_SYSTEM) = - (*(volatile unsigned short *)(V3_BASE + V3_SYSTEM)) | V3_SYSTEM_M_LOCK; + *(volatile unsigned short *) (V3_BASE + V3_SYSTEM) = + (*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) | + V3_SYSTEM_M_LOCK; - /* - * Register the hose - */ - hose->first_busno = 0; - hose->last_busno = 0xff; + /* + * Register the hose + */ + hose->first_busno = 0; + hose->last_busno = 0xff; - /* System memory space */ - pci_set_region(hose->regions + 0, - 0x00000000, 0x40000000, 0x01000000, - PCI_REGION_MEM | PCI_REGION_MEMORY); + /* System memory space */ + pci_set_region (hose->regions + 0, + 0x00000000, 0x40000000, 0x01000000, + PCI_REGION_MEM | PCI_REGION_MEMORY); - /* PCI Memory - config space */ - pci_set_region(hose->regions + 1, - 0x00000000, 0x62000000, 0x01000000, - PCI_REGION_MEM); + /* PCI Memory - config space */ + pci_set_region (hose->regions + 1, + 0x00000000, 0x62000000, 0x01000000, PCI_REGION_MEM); - /* PCI V3 regs */ - pci_set_region(hose->regions + 2, - 0x00000000, 0x61000000, 0x00080000, - PCI_REGION_MEM); + /* PCI V3 regs */ + pci_set_region (hose->regions + 2, + 0x00000000, 0x61000000, 0x00080000, PCI_REGION_MEM); - /* PCI I/O space */ - pci_set_region(hose->regions + 3, - 0x00000000, 0x60000000, 0x00010000, - PCI_REGION_IO); + /* PCI I/O space */ + pci_set_region (hose->regions + 3, + 0x00000000, 0x60000000, 0x00010000, PCI_REGION_IO); - pci_set_ops(hose, - pci_integrator_read_byte, - pci_integrator_read__word, - pci_integrator_read_dword, - pci_integrator_write_byte, - pci_integrator_write_word, - pci_integrator_write_dword); + pci_set_ops (hose, + pci_integrator_read_byte, + pci_integrator_read__word, + pci_integrator_read_dword, + pci_integrator_write_byte, + pci_integrator_write_word, pci_integrator_write_dword); - hose->region_count = 4; + hose->region_count = 4; - pci_register_hose(hose); + pci_register_hose (hose); - pciauto_config_init(hose); - pciauto_config_device(hose, 0); + pciauto_config_init (hose); + pciauto_config_device (hose, 0); - hose->last_busno = pci_hose_scan(hose); + hose->last_busno = pci_hose_scan (hose); } #endif @@ -452,4 +475,3 @@ int dram_init (void) { return 0; } - diff --git a/board/integratorap/u-boot.lds b/board/integratorap/u-boot.lds index da679c2e51..33931be127 100644 --- a/board/integratorap/u-boot.lds +++ b/board/integratorap/u-boot.lds @@ -43,8 +43,8 @@ SECTIONS .u_boot_cmd : { *(.u_boot_cmd) } __u_boot_cmd_end = .; - armboot_end_data = .; . = ALIGN(4); + __bss_start = .; .bss : { *(.bss) } - armboot_end = .; + _end = .; } diff --git a/board/integratorcp/config.mk b/board/integratorcp/config.mk index df674917a5..25b79b3e79 100644 --- a/board/integratorcp/config.mk +++ b/board/integratorcp/config.mk @@ -1,5 +1,5 @@ # -# image should be loaded at 0x01000000 +# image should be loaded at 0x01000000 # TEXT_BASE = 0x01000000 diff --git a/board/integratorcp/integratorcp.c b/board/integratorcp/integratorcp.c index 2e62f2655a..6071d81598 100644 --- a/board/integratorcp/integratorcp.c +++ b/board/integratorcp/integratorcp.c @@ -107,4 +107,3 @@ int dram_init (void) { return 0; } - diff --git a/board/integratorcp/u-boot.lds b/board/integratorcp/u-boot.lds index da679c2e51..33931be127 100644 --- a/board/integratorcp/u-boot.lds +++ b/board/integratorcp/u-boot.lds @@ -43,8 +43,8 @@ SECTIONS .u_boot_cmd : { *(.u_boot_cmd) } __u_boot_cmd_end = .; - armboot_end_data = .; . = ALIGN(4); + __bss_start = .; .bss : { *(.bss) } - armboot_end = .; + _end = .; } diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c index 5117394019..793684d0e2 100644 --- a/board/mpl/common/common_util.c +++ b/board/mpl/common/common_util.c @@ -232,7 +232,7 @@ mpl_prg_image(uchar *ld_addr) } puts("OK\n"); break; -#if CONFIG_BZIP2 +#ifdef CONFIG_BZIP2 case IH_COMP_BZIP2: puts("Uncompressing (BZIP2) ... "); { diff --git a/board/ocotea/ocotea.c b/board/ocotea/ocotea.c index 2e720b284f..b4b562269b 100644 --- a/board/ocotea/ocotea.c +++ b/board/ocotea/ocotea.c @@ -474,4 +474,3 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif - diff --git a/board/siemens/CCM/ccm.c b/board/siemens/CCM/ccm.c index b54f3c134f..3ed1b754ca 100644 --- a/board/siemens/CCM/ccm.c +++ b/board/siemens/CCM/ccm.c @@ -351,7 +351,7 @@ void reset_phy(void) ulong value; /* Configure all needed port pins for GPIO */ -#if CFG_ETH_MDDIS_VALUE +#ifdef CFG_ETH_MDDIS_VALUE immr->im_ioport.iop_padat |= CFG_PA_ETH_MDDIS; #else immr->im_ioport.iop_padat &= ~(CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET); /* Set low */ @@ -369,17 +369,17 @@ void reset_phy(void) value |= CFG_PB_ETH_POWERDOWN; /* PHY configuration includes MDDIS and CFG1 ... CFG3 */ -#if CFG_ETH_CFG1_VALUE +#ifdef CFG_ETH_CFG1_VALUE value |= CFG_PB_ETH_CFG1; #else value &= ~(CFG_PB_ETH_CFG1); #endif -#if CFG_ETH_CFG2_VALUE +#ifdef CFG_ETH_CFG2_VALUE value |= CFG_PB_ETH_CFG2; #else value &= ~(CFG_PB_ETH_CFG2); #endif -#if CFG_ETH_CFG3_VALUE +#ifdef CFG_ETH_CFG3_VALUE value |= CFG_PB_ETH_CFG3; #else value &= ~(CFG_PB_ETH_CFG3); diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c index 033cc368de..6374513fec 100644 --- a/board/siemens/pcu_e/pcu_e.c +++ b/board/siemens/pcu_e/pcu_e.c @@ -309,7 +309,7 @@ void reset_phy (void) /* Configure all needed port pins for GPIO */ #if PCU_E_WITH_SWAPPED_CS /* XXX */ -# if CFG_ETH_MDDIS_VALUE +# ifdef CFG_ETH_MDDIS_VALUE immr->im_ioport.iop_padat |= CFG_PA_ETH_MDDIS; # else immr->im_ioport.iop_padat &= ~(CFG_PA_ETH_MDDIS); /* Set low */ @@ -329,23 +329,23 @@ void reset_phy (void) /* PHY configuration includes MDDIS and CFG1 ... CFG3 */ #if !PCU_E_WITH_SWAPPED_CS -# if CFG_ETH_MDDIS_VALUE +# ifdef CFG_ETH_MDDIS_VALUE value |= CFG_PB_ETH_MDDIS; # else value &= ~(CFG_PB_ETH_MDDIS); # endif #endif -#if CFG_ETH_CFG1_VALUE +#ifdef CFG_ETH_CFG1_VALUE value |= CFG_PB_ETH_CFG1; #else value &= ~(CFG_PB_ETH_CFG1); #endif -#if CFG_ETH_CFG2_VALUE +#ifdef CFG_ETH_CFG2_VALUE value |= CFG_PB_ETH_CFG2; #else value &= ~(CFG_PB_ETH_CFG2); #endif -#if CFG_ETH_CFG3_VALUE +#ifdef CFG_ETH_CFG3_VALUE value |= CFG_PB_ETH_CFG3; #else value &= ~(CFG_PB_ETH_CFG3); diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c index 6ca054c302..d61fa3ed47 100644 --- a/board/ssv/common/cmd_sled.c +++ b/board/ssv/common/cmd_sled.c @@ -12,7 +12,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -28,20 +28,20 @@ #if defined(CONFIG_STATUS_LED) /* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - * !!!!! Q u i c k & D i r t y H a c k !!!!! + * !!!!! Q u i c k & D i r t y H a c k !!!!! * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - * !!!!! !!!!! - * !!!!! Next type definition was coming from original !!!!! - * !!!!! status LED driver drivers/status_led.c and !!!!! - * !!!!! should exported for using here. !!!!! - * !!!!! !!!!! + * !!!!! !!!!! + * !!!!! Next type definition was coming from original !!!!! + * !!!!! status LED driver drivers/status_led.c and !!!!! + * !!!!! should exported for using here. !!!!! + * !!!!! !!!!! * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */ typedef struct { - led_id_t mask; - int state; - int period; - int cnt; + led_id_t mask; + int state; + int period; + int cnt; } led_dev_t; extern led_dev_t led_dev[]; @@ -141,18 +141,18 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #ifdef STATUS_LED_RED #ifdef STATUS_LED_YELLOW #ifdef STATUS_LED_GREEN -#define __NAME_STR " - name: boot|red|yellow|green\n" +#define __NAME_STR " - name: boot|red|yellow|green\n" #else -#define __NAME_STR " - name: boot|red|yellow\n" +#define __NAME_STR " - name: boot|red|yellow\n" #endif #else -#define __NAME_STR " - name: boot|red\n" +#define __NAME_STR " - name: boot|red\n" #endif #else -#define __NAME_STR " - name: boot\n" +#define __NAME_STR " - name: boot\n" #endif #else -#define __NAME_STR " - name: (no such defined)\n" +#define __NAME_STR " - name: (no such defined)\n" #endif U_BOOT_CMD (sled, 3, 0, do_sled, diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c index 4769f27c73..f51a356da4 100644 --- a/board/trab/trab_fkt.c +++ b/board/trab/trab_fkt.c @@ -890,7 +890,7 @@ int do_touch (char **argv) int x, y; if (strcmp (argv[2], "tl") == 0) { -#if CONFIG_TOUCH_WAIT_PRESSED +#ifdef CONFIG_TOUCH_WAIT_PRESSED touch_wait_pressed(); #else { @@ -915,7 +915,7 @@ int do_touch (char **argv) return touch_write_clibration_values (CALIB_TL, x, y); } else if (strcmp (argv[2], "dr") == 0) { -#if CONFIG_TOUCH_WAIT_PRESSED +#ifdef CONFIG_TOUCH_WAIT_PRESSED touch_wait_pressed(); #else { diff --git a/board/versatile/config.mk b/board/versatile/config.mk index df674917a5..25b79b3e79 100644 --- a/board/versatile/config.mk +++ b/board/versatile/config.mk @@ -1,5 +1,5 @@ # -# image should be loaded at 0x01000000 +# image should be loaded at 0x01000000 # TEXT_BASE = 0x01000000 diff --git a/board/versatile/u-boot.lds b/board/versatile/u-boot.lds index da679c2e51..33931be127 100644 --- a/board/versatile/u-boot.lds +++ b/board/versatile/u-boot.lds @@ -43,8 +43,8 @@ SECTIONS .u_boot_cmd : { *(.u_boot_cmd) } __u_boot_cmd_end = .; - armboot_end_data = .; . = ALIGN(4); + __bss_start = .; .bss : { *(.bss) } - armboot_end = .; + _end = .; } diff --git a/board/versatile/versatile.c b/board/versatile/versatile.c index ead30881e4..626d5276b5 100644 --- a/board/versatile/versatile.c +++ b/board/versatile/versatile.c @@ -117,4 +117,3 @@ int dram_init (void) { return 0; } - diff --git a/common/cmd_ide.c b/common/cmd_ide.c index f7b28caea4..2b8b2bc946 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -303,16 +303,19 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (strcmp(argv[1],"read") == 0) { ulong addr = simple_strtoul(argv[2], NULL, 16); -#if CFG_64BIT_STRTOUL - lbaint_t blk = simple_strtoull(argv[3], NULL, 16); -#else - lbaint_t blk = simple_strtoul(argv[3], NULL, 16); -#endif ulong cnt = simple_strtoul(argv[4], NULL, 16); ulong n; +#ifdef CFG_64BIT_STRTOUL + lbaint_t blk = simple_strtoull(argv[3], NULL, 16); printf ("\nIDE read: device %d block # %qd, count %ld ... ", curr_device, blk, cnt); +#else + lbaint_t blk = simple_strtoul(argv[3], NULL, 16); + + printf ("\nIDE read: device %d block # %ld, count %ld ... ", + curr_device, blk, cnt); +#endif n = ide_dev_desc[curr_device].block_read (curr_device, blk, cnt, @@ -329,16 +332,19 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } } else if (strcmp(argv[1],"write") == 0) { ulong addr = simple_strtoul(argv[2], NULL, 16); -#if CFG_64BIT_STRTOUL - lbaint_t blk = simple_strtoull(argv[3], NULL, 16); -#else - lbaint_t blk = simple_strtoul(argv[3], NULL, 16); -#endif ulong cnt = simple_strtoul(argv[4], NULL, 16); ulong n; +#ifdef CFG_64BIT_STRTOUL + lbaint_t blk = simple_strtoull(argv[3], NULL, 16); printf ("\nIDE write: device %d block # %qd, count %ld ... ", curr_device, blk, cnt); +#else + lbaint_t blk = simple_strtoul(argv[3], NULL, 16); + + printf ("\nIDE write: device %d block # %ld, count %ld ... ", + curr_device, blk, cnt); +#endif n = ide_write (curr_device, blk, cnt, (ulong *)addr); @@ -1161,7 +1167,7 @@ static void ide_ident (block_dev_desc_t *dev_desc) dev_desc->lba = iop->lba_capacity; #endif /* __BIG_ENDIAN */ -#if CONFIG_LBA48 +#ifdef CONFIG_LBA48 if (iop->command_set_2 & 0x0400) { /* LBA 48 support */ dev_desc->lba48support = 1; dev_desc->lba48 = (unsigned long long)iop->lba48_capacity[0] | @@ -1203,7 +1209,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer) ulong n = 0; unsigned char c; unsigned char pwrsave=0; /* power save */ -#if CONFIG_LBA48 +#ifdef CONFIG_LBA48 unsigned char lba48 = 0; if (blknr & 0x0000fffff0000000) { @@ -1255,7 +1261,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer) printf ("IDE read: device %d not ready\n", device); break; } -#if CONFIG_LBA48 +#ifdef CONFIG_LBA48 if (lba48) { /* write high bits */ ide_outb (device, ATA_SECT_CNT, 0); @@ -1269,7 +1275,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer) ide_outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF); ide_outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF); -#if CONFIG_LBA48 +#ifdef CONFIG_LBA48 if (lba48) { ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device) ); ide_outb (device, ATA_COMMAND, ATA_CMD_READ_EXT); @@ -1293,7 +1299,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer) } if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) { -#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF +#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF) printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n", device, blknr, c); #else @@ -1322,7 +1328,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer) { ulong n = 0; unsigned char c; -#if CONFIG_LBA48 +#ifdef CONFIG_LBA48 unsigned char lba48 = 0; if (blknr & 0x0000fffff0000000) { @@ -1345,7 +1351,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer) printf ("IDE read: device %d not ready\n", device); goto WR_OUT; } -#if CONFIG_LBA48 +#ifdef CONFIG_LBA48 if (lba48) { /* write high bits */ ide_outb (device, ATA_SECT_CNT, 0); @@ -1359,7 +1365,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer) ide_outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF); ide_outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF); -#if CONFIG_LBA48 +#ifdef CONFIG_LBA48 if (lba48) { ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device) ); ide_outb (device, ATA_COMMAND, ATA_CMD_WRITE_EXT); @@ -1378,7 +1384,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer) c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */ if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) { -#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF +#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF) printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n", device, blknr, c); #else @@ -1959,7 +1965,9 @@ static void atapi_inquiry(block_dev_desc_t * dev_desc) ((unsigned long)iobuf[5]<<16) + ((unsigned long)iobuf[6]<< 8) + ((unsigned long)iobuf[7]); +#ifdef CONFIG_LBA48 dev_desc->lba48 = 0; /* ATAPI devices cannot use 48bit addressing (ATA/ATAPI v7) */ +#endif return; } diff --git a/common/devices.c b/common/devices.c index aa055339e8..7c859521a3 100644 --- a/common/devices.c +++ b/common/devices.c @@ -73,7 +73,7 @@ static void drv_system_init (void) strcpy (dev.name, "serial"); dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM; -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO dev.putc = serial_buffered_putc; dev.puts = serial_buffered_puts; dev.getc = serial_buffered_getc; diff --git a/cpu/arm920t/serial.c b/cpu/arm920t/serial.c index 6104e7528e..1749e820a1 100644 --- a/cpu/arm920t/serial.c +++ b/cpu/arm920t/serial.c @@ -1,18 +1,18 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License + /* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * @@ -28,13 +28,13 @@ #ifdef CONFIG_SERIAL1 #define UART_NR S3C24X0_UART0 -#elif CONFIG_SERIAL2 +#elif defined(CONFIG_SERIAL2) # if defined(CONFIG_TRAB) # error "TRAB supports only CONFIG_SERIAL1" # endif #define UART_NR S3C24X0_UART1 -#elif CONFIG_SERIAL3 +#elif defined(CONFIG_SERIAL3) # if defined(CONFIG_TRAB) # #error "TRAB supports only CONFIG_SERIAL1" # endif diff --git a/cpu/arm926ejs/interrupts.c b/cpu/arm926ejs/interrupts.c index 10841fd0a1..3770660282 100644 --- a/cpu/arm926ejs/interrupts.c +++ b/cpu/arm926ejs/interrupts.c @@ -293,7 +293,7 @@ ulong get_timer_masked (void) /* waits specified delay value and resets timestamp */ void udelay_masked (unsigned long usec) { - ulong tmo, tmp; + ulong tmo; if(usec >= 1000){ /* if "big" number, spread normalization to seconds */ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ diff --git a/cpu/i386/serial.c b/cpu/i386/serial.c index f58b47c70e..db13008ba5 100644 --- a/cpu/i386/serial.c +++ b/cpu/i386/serial.c @@ -51,7 +51,7 @@ #include #include -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO #include #endif @@ -81,7 +81,7 @@ #define asyncLSRRxFifoError1 0x80 -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO /*-----------------------------------------------------------------------------+ | Fifo +-----------------------------------------------------------------------------*/ @@ -193,7 +193,7 @@ int serial_getc(void) { unsigned char status = 0; -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO if (serial_buffer_active) { return serial_buffered_getc(); } @@ -225,7 +225,7 @@ int serial_tstc(void) { unsigned char status; -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO if (serial_buffer_active) { return serial_buffered_tstc(); } @@ -248,7 +248,7 @@ int serial_tstc(void) } -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO void serial_isr(void *arg) { diff --git a/cpu/mpc5xxx/ide.c b/cpu/mpc5xxx/ide.c index 47188691df..1969172bd3 100644 --- a/cpu/mpc5xxx/ide.c +++ b/cpu/mpc5xxx/ide.c @@ -73,7 +73,7 @@ int ide_preinit (void) *(vu_long *) MPC5XXX_ATA_PIO2 = reg; #ifdef CONFIG_IDE_RESET - init_ide_reset (); + init_ide_reset (); #endif /* CONFIG_IDE_RESET */ return (0); diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index c9e2e9c628..ff9215f3b2 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -364,7 +364,7 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev, */ static struct pci_config_table pci_405gp_config_table[] = { /*if VendID is 0 it terminates the table search (ie Walnut)*/ -#if CFG_PCI_SUBSYS_VENDORID +#ifdef CFG_PCI_SUBSYS_VENDORID {CFG_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge}, #endif diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index df19605a92..cdb503965b 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -70,17 +70,17 @@ int checkcpu (void) get_sys_info(&sys_info); -#if CONFIG_405GP +#ifdef CONFIG_405GP puts ("IBM PowerPC 405GP"); if (pvr == PVR_405GPR_RB) { putc('r'); } puts (" Rev. "); #endif -#if CONFIG_405CR +#ifdef CONFIG_405CR puts ("IBM PowerPC 405CR Rev. "); #endif -#if CONFIG_405EP +#ifdef CONFIG_405EP puts ("IBM PowerPC 405EP Rev. "); #endif switch (pvr) { @@ -89,7 +89,7 @@ int checkcpu (void) putc('B'); break; case PVR_405GP_RC: -#if CONFIG_405CR +#ifdef CONFIG_405CR case PVR_405CR_RC: #endif putc('C'); @@ -97,7 +97,7 @@ int checkcpu (void) case PVR_405GP_RD: putc('D'); break; -#if CONFIG_405GP +#ifdef CONFIG_405GP case PVR_405GP_RE: putc('E'); break; diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c index 2c77338f21..41402ccba6 100644 --- a/cpu/ppc4xx/serial.c +++ b/cpu/ppc4xx/serial.c @@ -48,7 +48,7 @@ #include #include "vecnum.h" -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO #include #endif @@ -351,7 +351,7 @@ int serial_tstc () /*#define asyncRxBufferport1 ACTING_UART0_BASE+0x00 */ -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO /*-----------------------------------------------------------------------------+ | Fifo +-----------------------------------------------------------------------------*/ @@ -637,7 +637,7 @@ int serial_tstc () } -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO void serial_isr (void *arg) { diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c index 7172fe3ea8..f8f88ff45b 100644 --- a/cpu/ppc4xx/speed.c +++ b/cpu/ppc4xx/speed.c @@ -247,7 +247,7 @@ void get_sys_info (sys_info_t * sysInfo) unsigned long temp1; unsigned long lfdiv; unsigned long m; - unsigned long prbdv0; + unsigned long prbdv0; /* Extract configured divisors */ mfsdr( sdr_sdstp0,strp0 ); diff --git a/cpu/s3c44b0/start.S b/cpu/s3c44b0/start.S index ce31ec935d..b4b7c3f62c 100644 --- a/cpu/s3c44b0/start.S +++ b/cpu/s3c44b0/start.S @@ -71,16 +71,15 @@ _armboot_start: .word _start /* - * Note: _armboot_end_data and _armboot_end are defined - * by the (board-dependent) linker script. - * _armboot_end_data is the first usable FLASH address after armboot + * These are defined in the board-specific linker script. */ -.globl _armboot_end_data -_armboot_end_data: - .word armboot_end_data -.globl _armboot_end -_armboot_end: - .word armboot_end +.globl _bss_start +_bss_start: + .word __bss_start + +.globl _bss_end +_bss_end: + .word _end #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ @@ -130,7 +129,7 @@ relocate: /* relocate U-Boot to RAM */ beq stack_setup ldr r2, _armboot_start - ldr r3, _armboot_end + ldr r3, _bss_start sub r2, r3, r2 /* r2 <- size of armboot */ add r2, r0, r2 /* r2 <- source end address */ diff --git a/cpu/sa1100/serial.c b/cpu/sa1100/serial.c index d3b8628245..a598489df7 100644 --- a/cpu/sa1100/serial.c +++ b/cpu/sa1100/serial.c @@ -66,7 +66,7 @@ void serial_setbrg (void) Ser1UTCR1 = 0; Ser1UTCR2 = (u32)reg; Ser1UTCR3 = ( UTCR3_RXE | UTCR3_TXE ); -#elif CONFIG_SERIAL3 +#elif defined(CONFIG_SERIAL3) /* Wait until port is ready ... */ while (Ser3UTSR1 & UTSR1_TBY) { } @@ -107,7 +107,7 @@ void serial_putc (const char c) while ((Ser1UTSR0 & UTSR0_TFS) == 0); Ser1UTDR = c; -#elif CONFIG_SERIAL3 +#elif defined(CONFIG_SERIAL3) /* wait for room in the tx FIFO on SERIAL3 */ while ((Ser3UTSR0 & UTSR0_TFS) == 0); @@ -128,7 +128,7 @@ int serial_tstc (void) { #ifdef CONFIG_SERIAL1 return Ser1UTSR1 & UTSR1_RNE; -#elif CONFIG_SERIAL3 +#elif defined(CONFIG_SERIAL3) return Ser3UTSR1 & UTSR1_RNE; #endif } @@ -144,7 +144,7 @@ int serial_getc (void) while (!(Ser1UTSR1 & UTSR1_RNE)); return (char) Ser1UTDR & 0xff; -#elif CONFIG_SERIAL3 +#elif defined(CONFIG_SERIAL3) while (!(Ser3UTSR1 & UTSR1_RNE)); return (char) Ser3UTDR & 0xff; diff --git a/disk/part.c b/disk/part.c index 783b391c5a..90d6644ae4 100644 --- a/disk/part.c +++ b/disk/part.c @@ -44,7 +44,7 @@ */ void dev_print (block_dev_desc_t *dev_desc) { -#if CONFIG_LBA48 +#ifdef CONFIG_LBA48 uint64_t lba512; /* number of blocks if 512bytes block size */ #else lbaint_t lba512; @@ -87,7 +87,7 @@ void dev_print (block_dev_desc_t *dev_desc) if ((dev_desc->lba * dev_desc->blksz)>0L) { ulong mb, mb_quot, mb_rem, gb, gb_quot, gb_rem; lbaint_t lba; -#if CONFIG_LBA48 +#ifdef CONFIG_LBA48 if (dev_desc->lba48support) lba = dev_desc->lba48; else @@ -103,11 +103,11 @@ void dev_print (block_dev_desc_t *dev_desc) gb = mb / 1024; gb_quot = gb / 10; gb_rem = gb - (10 * gb_quot); -#if CONFIG_LBA48 +#ifdef CONFIG_LBA48 if (dev_desc->lba48support) printf (" Supports 48-bit addressing\n"); #endif -#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF +#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF) printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%qd x %ld)\n", mb_quot, mb_rem, gb_quot, gb_rem, diff --git a/doc/README.adnpesc1 b/doc/README.adnpesc1 index 1d3dff2382..ded53210bd 100644 --- a/doc/README.adnpesc1 +++ b/doc/README.adnpesc1 @@ -43,7 +43,7 @@ choices & assume that the monitor is placed at the end of a memory resource. So you must make sure TEXT_BASE is chosen appropriately. This is very important if you plan to move your memory to another place as configured at this time! - + -The heap is placed below the monitor (U-Boot code). -Global data is placed below the heap. -The stack is placed below global data (&grows down). @@ -190,7 +190,7 @@ you have to check-up the next environment variables: 2. appl_entry_addr - Nios application area start address (usually in Flash) - - this is the startup address for autoboot + - this is the startup address for autoboot - each Nios application code we want to update will be copied to this address - default is CFG_ADNPESC1_NIOS_APPL_ENTRY diff --git a/drivers/cs8900.h b/drivers/cs8900.h index d772cad667..f886d103c1 100644 --- a/drivers/cs8900.h +++ b/drivers/cs8900.h @@ -47,7 +47,7 @@ #define CS8900_OFF 0x02 #define CS8900_BUS16_0 *(volatile u8 *)(CS8900_BASE+0x00) #define CS8900_BUS16_1 *(volatile u8 *)(CS8900_BASE+0x01) -#elif CS8900_BUS32 +#elif defined(CS8900_BUS32) /* 32 bit aligned registers, 16 bit wide (we ignore upper 16 bits) */ #define CS8900_REG u32 #define CS8900_OFF 0x04 diff --git a/drivers/pci.c b/drivers/pci.c index e014f91444..5a9dae47f3 100644 --- a/drivers/pci.c +++ b/drivers/pci.c @@ -163,7 +163,7 @@ pci_dev_t pci_find_devices(struct pci_device_id *ids, int index) for (hose = hose_head; hose; hose = hose->next) { -#if CFG_SCSI_SCAN_BUS_REVERSE +#ifdef CFG_SCSI_SCAN_BUS_REVERSE for (bus = hose->last_busno; bus >= hose->first_busno; bus--) #else for (bus = hose->first_busno; bus <= hose->last_busno; bus++) diff --git a/drivers/serial_pl010.c b/drivers/serial_pl010.c index 01b5f0aafd..7ff4b85c35 100644 --- a/drivers/serial_pl010.c +++ b/drivers/serial_pl010.c @@ -41,137 +41,134 @@ #define NUM_PORTS 2 #define CONSOLE_PORT CONFIG_CONS_INDEX #define baudRate CONFIG_BAUDRATE -static volatile unsigned char * const port[NUM_PORTS] = {(void*)(CFG_SERIAL0), - (void*)(CFG_SERIAL1)}; +static volatile unsigned char *const port[NUM_PORTS] = { + (void *) (CFG_SERIAL0), + (void *) (CFG_SERIAL1) +}; -static void pl010_putc(int portnum, char c); -static int pl010_getc(int portnum); -static int pl010_tstc(int portnum); +static void pl010_putc (int portnum, char c); +static int pl010_getc (int portnum); +static int pl010_tstc (int portnum); int serial_init (void) { - unsigned int temp; - unsigned int divisor; - - /* - ** First, disable everything. - */ - IO_WRITE(port[CONSOLE_PORT] + UART_PL010_CR, 0x0); - - /* - ** Set baud rate - ** - */ - switch (baudRate) { - case 9600: - divisor = UART_PL010_BAUD_9600; - break; - - case 19200: - divisor = UART_PL010_BAUD_9600; - break; - - case 38400: - divisor = UART_PL010_BAUD_38400; - break; - - case 57600: - divisor = UART_PL010_BAUD_57600; - break; - - case 115200: - divisor = UART_PL010_BAUD_115200; - break; - - default: - divisor = UART_PL010_BAUD_38400; - } - - IO_WRITE(port[CONSOLE_PORT] + UART_PL010_LCRM, ((divisor & 0xf00) >> 8)); - IO_WRITE(port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff)); - - /* - ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. - */ - IO_WRITE(port[CONSOLE_PORT] + UART_PL010_LCRH, - (UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN)); - - /* - ** Finally, enable the UART - */ - IO_WRITE(port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN)); - - return (0); + unsigned int divisor; + + /* + ** First, disable everything. + */ + IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, 0x0); + + /* + ** Set baud rate + ** + */ + switch (baudRate) { + case 9600: + divisor = UART_PL010_BAUD_9600; + break; + + case 19200: + divisor = UART_PL010_BAUD_9600; + break; + + case 38400: + divisor = UART_PL010_BAUD_38400; + break; + + case 57600: + divisor = UART_PL010_BAUD_57600; + break; + + case 115200: + divisor = UART_PL010_BAUD_115200; + break; + + default: + divisor = UART_PL010_BAUD_38400; + } + + IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRM, + ((divisor & 0xf00) >> 8)); + IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff)); + + /* + ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. + */ + IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRH, + (UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN)); + + /* + ** Finally, enable the UART + */ + IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN)); + + return (0); } -void -serial_putc(const char c) +void serial_putc (const char c) { if (c == '\n') - pl010_putc(CONSOLE_PORT, '\r'); + pl010_putc (CONSOLE_PORT, '\r'); - pl010_putc(CONSOLE_PORT, c); + pl010_putc (CONSOLE_PORT, c); } -void -serial_puts (const char *s) +void serial_puts (const char *s) { while (*s) { serial_putc (*s++); } } -int -serial_getc(void) +int serial_getc (void) { - return pl010_getc(CONSOLE_PORT); + return pl010_getc (CONSOLE_PORT); } -int -serial_tstc(void) +int serial_tstc (void) { - return pl010_tstc(CONSOLE_PORT); + return pl010_tstc (CONSOLE_PORT); } -void -serial_setbrg (void) +void serial_setbrg (void) { } -static void pl010_putc(int portnum, char c) +static void pl010_putc (int portnum, char c) { - /* Wait until there is space in the FIFO */ - while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF); - - /* Send the character */ - IO_WRITE(port[portnum] + UART_PL01x_DR, c); + /* Wait until there is space in the FIFO */ + while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF); + + /* Send the character */ + IO_WRITE (port[portnum] + UART_PL01x_DR, c); } -static int pl010_getc(int portnum) +static int pl010_getc (int portnum) { - unsigned int data; - - /* Wait until there is data in the FIFO */ - while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); - - data = IO_READ(port[portnum] + UART_PL01x_DR); - - /* Check for an error flag */ - if (data & 0xFFFFFF00) - { - /* Clear the error */ - IO_WRITE(port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF); - return -1; - } - - return (int)data; + unsigned int data; + + /* Wait until there is data in the FIFO */ + while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); + + data = IO_READ (port[portnum] + UART_PL01x_DR); + + /* Check for an error flag */ + if (data & 0xFFFFFF00) { + /* Clear the error */ + IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF); + return -1; + } + + return (int) data; } -static int pl010_tstc(int portnum) +static int pl010_tstc (int portnum) { - return !(IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); + return !(IO_READ (port[portnum] + UART_PL01x_FR) & + UART_PL01x_FR_RXFE); } #endif diff --git a/drivers/serial_pl011.c b/drivers/serial_pl011.c index 60fcc9132a..0e132268c8 100644 --- a/drivers/serial_pl011.c +++ b/drivers/serial_pl011.c @@ -38,138 +38,136 @@ #define IO_READ(addr) (*(volatile unsigned int *)(addr)) /* - * IntegratorCP has two UARTs, use the first one, at 38400-8-N-1 + * IntegratorCP has two UARTs, use the first one, at 38400-8-N-1 * Versatile PB has four UARTs. */ #define NUM_PORTS 2 #define CONSOLE_PORT CONFIG_CONS_INDEX #define baudRate CONFIG_BAUDRATE -static volatile unsigned char * const port[NUM_PORTS] = {(void*)(CFG_SERIAL0), - (void*)(CFG_SERIAL1)}; +static volatile unsigned char *const port[NUM_PORTS] = { + (void *) (CFG_SERIAL0), + (void *) (CFG_SERIAL1) +}; -static void pl011_putc(int portnum, char c); -static int pl011_getc(int portnum); -static int pl011_tstc(int portnum); +static void pl011_putc (int portnum, char c); +static int pl011_getc (int portnum); +static int pl011_tstc (int portnum); int serial_init (void) { - unsigned int temp; - unsigned int divider; - unsigned int remainder; - unsigned int fraction; - - /* - ** First, disable everything. - */ - IO_WRITE(port[CONSOLE_PORT] + UART_PL011_CR, 0x0); - - /* - ** Set baud rate - ** - ** IBRD = UART_CLK / (16 * BAUD_RATE) - ** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE)) - */ + unsigned int temp; + unsigned int divider; + unsigned int remainder; + unsigned int fraction; + + /* + ** First, disable everything. + */ + IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, 0x0); + + /* + ** Set baud rate + ** + ** IBRD = UART_CLK / (16 * BAUD_RATE) + ** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE)) + */ #ifdef CONFIG_VERSATILE - temp = 16 * baudRate; - divider = 24000000 / temp; - remainder = 24000000 % temp; - temp = (8 * remainder) / baudRate; - fraction = (temp >> 1) + (temp & 1); + temp = 16 * baudRate; + divider = 24000000 / temp; + remainder = 24000000 % temp; + temp = (8 * remainder) / baudRate; + fraction = (temp >> 1) + (temp & 1); #endif #ifdef CONFIG_INTEGRATOR - temp = 16 * baudRate; - divider = 14745600 / temp; - remainder = 14745600 % temp; - temp = (8 * remainder) / baudRate; - fraction = (temp >> 1) + (temp & 1); + temp = 16 * baudRate; + divider = 14745600 / temp; + remainder = 14745600 % temp; + temp = (8 * remainder) / baudRate; + fraction = (temp >> 1) + (temp & 1); #endif - - IO_WRITE(port[CONSOLE_PORT] + UART_PL011_IBRD, divider); - IO_WRITE(port[CONSOLE_PORT] + UART_PL011_FBRD, fraction); - - /* - ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. - */ - IO_WRITE(port[CONSOLE_PORT] + UART_PL011_LCRH, - (UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN)); - - /* - ** Finally, enable the UART - */ - IO_WRITE(port[CONSOLE_PORT] + UART_PL011_CR, - (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE)); - - return (0); + + IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider); + IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction); + + /* + ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. + */ + IO_WRITE (port[CONSOLE_PORT] + UART_PL011_LCRH, + (UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN)); + + /* + ** Finally, enable the UART + */ + IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, + (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | + UART_PL011_CR_RXE)); + + return (0); } -void -serial_putc(const char c) +void serial_putc (const char c) { if (c == '\n') - pl011_putc(CONSOLE_PORT, '\r'); + pl011_putc (CONSOLE_PORT, '\r'); - pl011_putc(CONSOLE_PORT, c); + pl011_putc (CONSOLE_PORT, c); } -void -serial_puts (const char *s) +void serial_puts (const char *s) { while (*s) { serial_putc (*s++); } } -int -serial_getc(void) +int serial_getc (void) { - return pl011_getc(CONSOLE_PORT); + return pl011_getc (CONSOLE_PORT); } -int -serial_tstc(void) +int serial_tstc (void) { - return pl011_tstc(CONSOLE_PORT); + return pl011_tstc (CONSOLE_PORT); } -void -serial_setbrg (void) +void serial_setbrg (void) { } -static void pl011_putc(int portnum, char c) +static void pl011_putc (int portnum, char c) { - /* Wait until there is space in the FIFO */ - while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF); - - /* Send the character */ - IO_WRITE(port[portnum] + UART_PL01x_DR, c); + /* Wait until there is space in the FIFO */ + while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF); + + /* Send the character */ + IO_WRITE (port[portnum] + UART_PL01x_DR, c); } -static int pl011_getc(int portnum) +static int pl011_getc (int portnum) { - unsigned int data; - - /* Wait until there is data in the FIFO */ - while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); - - data = IO_READ(port[portnum] + UART_PL01x_DR); - - /* Check for an error flag */ - if (data & 0xFFFFFF00) - { - /* Clear the error */ - IO_WRITE(port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF); - return -1; - } - - return (int)data; + unsigned int data; + + /* Wait until there is data in the FIFO */ + while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); + + data = IO_READ (port[portnum] + UART_PL01x_DR); + + /* Check for an error flag */ + if (data & 0xFFFFFF00) { + /* Clear the error */ + IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF); + return -1; + } + + return (int) data; } -static int pl011_tstc(int portnum) +static int pl011_tstc (int portnum) { - return !(IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); + return !(IO_READ (port[portnum] + UART_PL01x_FR) & + UART_PL01x_FR_RXFE); } #endif diff --git a/drivers/serial_pl011.h b/drivers/serial_pl011.h index 2117848c9c..5f20fdd108 100644 --- a/drivers/serial_pl011.h +++ b/drivers/serial_pl011.h @@ -23,11 +23,11 @@ */ /* - * ARM PrimeCell UART's (PL010 & PL011) + * ARM PrimeCell UART's (PL010 & PL011) * ------------------------------------ - * + * * Definitions common to both PL010 & PL011 - * + * */ #define UART_PL01x_DR 0x00 /* Data read or written from the interface. */ #define UART_PL01x_RSR 0x04 /* Receive status register (Read). */ @@ -46,9 +46,9 @@ #define UART_PL01x_FR_BUSY 0x08 #define UART_PL01x_FR_TMSK (UART_PL01x_FR_TXFF + UART_PL01x_FR_BUSY) -/* +/* * PL010 definitions - * + * */ #define UART_PL010_LCRH 0x08 /* Line control register, high byte. */ #define UART_PL010_LCRM 0x0C /* Line control register, middle byte. */ @@ -57,7 +57,7 @@ #define UART_PL010_IIR 0x1C /* Interrupt indentification register (Read). */ #define UART_PL010_ICR 0x1C /* Interrupt clear register (Write). */ #define UART_PL010_ILPR 0x20 /* IrDA low power counter register. */ - + #define UART_PL010_CR_LPE (1 << 7) #define UART_PL010_CR_RTIE (1 << 6) #define UART_PL010_CR_TIE (1 << 5) @@ -66,7 +66,7 @@ #define UART_PL010_CR_IIRLP (1 << 2) #define UART_PL010_CR_SIREN (1 << 1) #define UART_PL010_CR_UARTEN (1 << 0) - + #define UART_PL010_LCRH_WLEN_8 (3 << 5) #define UART_PL010_LCRH_WLEN_7 (2 << 5) #define UART_PL010_LCRH_WLEN_6 (1 << 5) @@ -89,9 +89,9 @@ #define UART_PL010_BAUD_4800 191 #define UART_PL010_BAUD_2400 383 #define UART_PL010_BAUD_1200 767 -/* +/* * PL011 definitions - * + * */ #define UART_PL011_IBRD 0x24 #define UART_PL011_FBRD 0x28 @@ -99,7 +99,7 @@ #define UART_PL011_CR 0x30 #define UART_PL011_IMSC 0x38 #define UART_PL011_PERIPH_ID0 0xFE0 - + #define UART_PL011_LCRH_SPS (1 << 7) #define UART_PL011_LCRH_WLEN_8 (3 << 5) #define UART_PL011_LCRH_WLEN_7 (2 << 5) diff --git a/drivers/smc91111.c b/drivers/smc91111.c index 486c11cd09..45bc2483fc 100644 --- a/drivers/smc91111.c +++ b/drivers/smc91111.c @@ -7,7 +7,7 @@ . Rolf Offermanns . . Copyright (C) 2001 Standard Microsystems Corporation (SMSC) - . Developed by Simple Network Magic Corporation (SNMC) + . Developed by Simple Network Magic Corporation (SNMC) . Copyright (C) 1996 by Erik Stahlman (ES) . . This program is free software; you can redistribute it and/or modify @@ -17,12 +17,12 @@ . . This program is distributed in the hope that it will be useful, . but WITHOUT ANY WARRANTY; without even the implied warranty of - . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the . GNU General Public License for more details. . . You should have received a copy of the GNU General Public License . along with this program; if not, write to the Free Software - . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA . . Information contained in this file was obtained from the LAN91C111 . manual from SMC. To get a copy, if you really want one, you can find @@ -36,27 +36,27 @@ . EEPROM interface for configuration . . Arguments: - . io = for the base address + . io = for the base address . irq = for the IRQ . . author: - . Erik Stahlman ( erik@vt.edu ) - . Daris A Nevil ( dnevil@snmc.com ) + . Erik Stahlman ( erik@vt.edu ) + . Daris A Nevil ( dnevil@snmc.com ) . . . Hardware multicast code from Peter Cammaert ( pc@denkart.be ) . . Sources: - . o SMSC LAN91C111 databook (www.smsc.com) - . o smc9194.c by Erik Stahlman - . o skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov ) + . o SMSC LAN91C111 databook (www.smsc.com) + . o smc9194.c by Erik Stahlman + . o skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov ) . . History: - . 06/19/03 Richard Woodruff Made u-boot environment aware and added mac addr checks. + . 06/19/03 Richard Woodruff Made u-boot environment aware and added mac addr checks. . 10/17/01 Marco Hasewinkel Modify for DNP/1110 - . 07/25/01 Woojung Huh Modify for ADS Bitsy - . 04/25/01 Daris A Nevil Initial public release through SMSC - . 03/16/01 Daris A Nevil Modified smc9194.c for use with LAN91C111 + . 07/25/01 Woojung Huh Modify for ADS Bitsy + . 04/25/01 Daris A Nevil Initial public release through SMSC + . 03/16/01 Daris A Nevil Modified smc9194.c for use with LAN91C111 ----------------------------------------------------------------------------*/ #include @@ -113,7 +113,7 @@ static const char version[] = /*------------------------------------------------------------------------ . - . The internal workings of the driver. If you are changing anything + . The internal workings of the driver. If you are changing anything . here with the SMC stuff, you should have the datasheet and know . what you are doing. . @@ -138,7 +138,7 @@ static const char version[] = #define ETH_ZLEN 60 -#ifdef CONFIG_SMC_USE_32_BIT +#ifdef CONFIG_SMC_USE_32_BIT #define USE_32_BIT 1 #else #undef USE_32_BIT @@ -253,7 +253,7 @@ void smc_get_macaddr( byte *addr ) { #endif /* 0 */ /*********************************************** - * Show available memory * + * Show available memory * ***********************************************/ void dump_memory_info(void) { @@ -337,8 +337,8 @@ static inline void smc_wait_mmu_release_complete (void) /* . Function: smc_reset( void ) . Purpose: - . This sets the SMC91111 chip to its normal state, hopefully from whatever - . mess that any other DOS driver has put it in. + . This sets the SMC91111 chip to its normal state, hopefully from whatever + . mess that any other DOS driver has put it in. . . Maybe I should reset more registers to defaults in here? SOFTRST should . do that for me. @@ -436,7 +436,7 @@ static void smc_enable() . (1) maybe utilize power down mode. . Why not yet? Because while the chip will go into power down mode, . the manual says that it will wake up in response to any I/O requests - . in the register space. Empirical results do not show this working. + . in the register space. Empirical results do not show this working. */ static void smc_shutdown() { @@ -459,7 +459,7 @@ static void smc_shutdown() . This sends the actual packet to the SMC9xxx chip. . . Algorithm: - . First, see if a saved_skb is available. + . First, see if a saved_skb is available. . ( this should NOT be called if there is no 'saved_skb' . Now, find the packet number that the chip allocated . Point the data pointers at it in memory @@ -467,9 +467,9 @@ static void smc_shutdown() . Dump the packet to chip memory . Check if a last byte is needed ( odd length packet ) . if so, set the control flag right - . Tell the card to send it + . Tell the card to send it . Enable the transmit interrupt, so I know if it failed - . Free the kernel data if I actually sent it. + . Free the kernel data if I actually sent it. */ static int smc_send_packet (volatile void *packet, int packet_length) { @@ -512,9 +512,9 @@ static int smc_send_packet (volatile void *packet, int packet_length) SMC_outw (MC_ALLOC | numPages, MMU_CMD_REG); /* FIXME: the ALLOC_INT bit never gets set * - * so the following will always give a * - * memory allocation error. * - * same code works in armboot though * + * so the following will always give a * + * memory allocation error. * + * same code works in armboot though * * -ro */ @@ -583,7 +583,7 @@ again: /* send the actual data . I _think_ it's faster to send the longs first, and then . mop up by sending the last word. It depends heavily - . on alignment, at least on the 486. Maybe it would be + . on alignment, at least on the 486. Maybe it would be . a good idea to check which is optimal? But that could take . almost as much time as is saved? */ @@ -596,7 +596,7 @@ again: SMC_outsw (SMC91111_DATA_REG, buf, (length) >> 1); #endif /* USE_32_BIT */ - /* Send the last byte, if there is one. */ + /* Send the last byte, if there is one. */ if ((length & 1) == 0) { SMC_outw (0, SMC91111_DATA_REG); } else { @@ -690,7 +690,7 @@ static int smc_open (bd_t * bd) err = smc_get_ethaddr (bd); /* set smc_mac_addr, and sync it with u-boot globals */ if (err < 0) { - memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */ + memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */ return (-1); /* upper code ignores this, but NOT bi_enetaddr */ } #ifdef USE_32_BIT @@ -723,10 +723,10 @@ static int smc_open (bd_t * bd) */ static int smc_rcv() { - int packet_number; + int packet_number; word status; word packet_length; - int is_error = 0; + int is_error = 0; #ifdef USE_32_BIT dword stat_len; #endif @@ -749,8 +749,8 @@ static int smc_rcv() status = stat_len & 0xffff; packet_length = stat_len >> 16; #else - status = SMC_inw( SMC91111_DATA_REG ); - packet_length = SMC_inw( SMC91111_DATA_REG ); + status = SMC_inw( SMC91111_DATA_REG ); + packet_length = SMC_inw( SMC91111_DATA_REG ); #endif packet_length &= 0x07ff; /* mask off top bits */ @@ -773,7 +773,7 @@ static int smc_rcv() /* QUESTION: Like in the TX routine, do I want to send the DWORDs or the bytes first, or some mixture. A mixture might improve already slow PIO - performance */ + performance */ SMC_insl( SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 2 ); /* read the left over bytes */ if (packet_length & 3) { @@ -825,7 +825,7 @@ static int smc_rcv() . smc_close . . this makes the board clean up everything that it can - . and not talk to the outside world. Caused by + . and not talk to the outside world. Caused by . an 'ifconfig ethX down' . -----------------------------------------------------*/ @@ -1380,7 +1380,7 @@ int smc_get_ethaddr (bd_t * bd) s = s_env_mac; } - for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */ + for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */ v_env_mac[reg] = s ? simple_strtoul (s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; @@ -1403,7 +1403,7 @@ int smc_get_ethaddr (bd_t * bd) v_mac = v_env_mac; /* always use a good env over a ROM */ } - if (env_present && rom_valid) { /* if both env and ROM are good */ + if (env_present && rom_valid) { /* if both env and ROM are good */ if (memcmp (v_env_mac, v_rom_mac, 6) != 0) { printf ("\nWarning: MAC addresses don't match:\n"); printf ("\tHW MAC address: " @@ -1422,7 +1422,7 @@ int smc_get_ethaddr (bd_t * bd) memcpy (bd->bi_enetaddr, v_mac, 6); /* update global address to match env (allows env changing) */ smc_set_mac_addr (v_mac); /* use old function to update smc default */ PRINTK("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", v_mac[0], v_mac[1], - v_mac[2], v_mac[3], v_mac[4], v_mac[5]); + v_mac[2], v_mac[3], v_mac[4], v_mac[5]); return (0); } diff --git a/drivers/usbtty.c b/drivers/usbtty.c index 7e553b382c..ce4a12e16e 100644 --- a/drivers/usbtty.c +++ b/drivers/usbtty.c @@ -314,7 +314,7 @@ int drv_usbtty_init (void) int rc; char * sn; int snlen; - + if (!(sn = getenv("serial#"))) { sn = "000000000000"; } diff --git a/include/ata.h b/include/ata.h index d07210b137..8584226eb0 100644 --- a/include/ata.h +++ b/include/ata.h @@ -208,7 +208,7 @@ typedef struct hd_driveid { unsigned short word92; /* reserved (word 92) */ unsigned short hw_config; /* hardware config */ unsigned short words94_99[6];/* reserved words 94-99 */ - //unsigned long long lba48_capacity; /* 4 16bit values containing lba 48 total number of sectors */ + /*unsigned long long lba48_capacity; /--* 4 16bit values containing lba 48 total number of sectors */ unsigned short lba48_capacity[4]; /* 4 16bit values containing lba 48 total number of sectors */ unsigned short words104_125[22];/* reserved words 104-125 */ unsigned short last_lun; /* reserved (word 126) */ diff --git a/include/common.h b/include/common.h index 4c3940333a..25ab5aa547 100644 --- a/include/common.h +++ b/include/common.h @@ -134,7 +134,7 @@ typedef void (interrupt_handler_t)(void *); * Function Prototypes */ -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO void serial_buffered_init (void); void serial_buffered_putc (const char); void serial_buffered_puts (const char *); @@ -459,7 +459,7 @@ int init_timebase (void); /* lib_generic/vsprintf.c */ ulong simple_strtoul(const char *cp,char **endp,unsigned int base); -#if CFG_64BIT_VSPRINTF +#ifdef CFG_64BIT_VSPRINTF unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base); #endif long simple_strtol(const char *cp,char **endp,unsigned int base); diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index c62f942d51..5b2a8a33e2 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -175,7 +175,7 @@ #define CONFIG_BOOT_ROOT_INITRD 0 /* Use ram disk for the root file system */ #define CONFIG_BOOT_ROOT_NFS 1 /* Use a NFS mounted root file system */ -#if CONFIG_BOOT_ROOT_INITRD +#ifdef CONFIG_BOOT_ROOT_INITRD #define CONFIG_BOOTCOMMAND \ "version;" \ "echo;" \ @@ -185,7 +185,7 @@ "bootm" #endif /* CONFIG_BOOT_ROOT_INITRD */ -#if CONFIG_BOOT_ROOT_NFS +#ifdef CONFIG_BOOT_ROOT_NFS #define CONFIG_BOOTCOMMAND \ "version;" \ "echo;" \ diff --git a/include/configs/OCOTEA.h b/include/configs/OCOTEA.h index 0b1873ee8e..dea8953832 100644 --- a/include/configs/OCOTEA.h +++ b/include/configs/OCOTEA.h @@ -21,7 +21,7 @@ */ /************************************************************************ - * 1 March 2004 Travis B. Sawyer + * 1 March 2004 Travis B. Sawyer * Adapted to current Das U-Boot source ***********************************************************************/ @@ -37,7 +37,7 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_OCOTEA 1 /* Board is ebony */ -#define CONFIG_440_GX 1 /* Specifc GX support */ +#define CONFIG_440_GX 1 /* Specifc GX support */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ @@ -68,8 +68,8 @@ #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) -#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ #define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/ @@ -110,8 +110,8 @@ /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x53,0x52} /* SPD i2c spd addresses */ +#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x53,0x52} /* SPD i2c spd addresses */ /*----------------------------------------------------------------------- * I2C @@ -129,7 +129,7 @@ #define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */ #undef CFG_ENV_IS_IN_FLASH /* ... not in flash */ #undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ -#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_OVERWRITE 1 #define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */ #define CFG_ENV_ADDR \ @@ -146,18 +146,18 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_NET_MULTI 1 #define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ -#define CONFIG_PHY1_ADDR 2 -#define CONFIG_PHY2_ADDR 0x10 -#define CONFIG_PHY3_ADDR 0x18 -#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 10.1.2.3 -#define CONFIG_ETHADDR 00:04:AC:E3:28:8A -#define CONFIG_ETHADDR1 00:04:AC:E3:28:8B -#define CONFIG_ETHADDR2 00:04:AC:E3:28:8C -#define CONFIG_ETHADDR3 00:04:AC:E3:28:8D -#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ -#define CONFIG_SERVERIP 10.1.2.2 +#define CONFIG_PHY1_ADDR 2 +#define CONFIG_PHY2_ADDR 0x10 +#define CONFIG_PHY3_ADDR 0x18 +#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 10.1.2.3 +#define CONFIG_ETHADDR 00:04:AC:E3:28:8A +#define CONFIG_ETHADDR1 00:04:AC:E3:28:8B +#define CONFIG_ETHADDR2 00:04:AC:E3:28:8C +#define CONFIG_ETHADDR3 00:04:AC:E3:28:8D +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_SERVERIP 10.1.2.2 #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_PCI | \ @@ -167,10 +167,10 @@ CFG_CMD_DHCP | \ CFG_CMD_DATE | \ CFG_CMD_BEDBUG | \ - CFG_CMD_PING | \ - CFG_CMD_DIAG | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_DIAG | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ CFG_CMD_ELF ) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ @@ -206,17 +206,17 @@ *----------------------------------------------------------------------- */ /* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ -#define CFG_PCI_TARGET_INIT /* let board init pci target */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT /* let board init pci target */ -#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ -#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ +#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index 7b9fdc4e70..af74f9dc07 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -364,7 +364,7 @@ * 5 0 00000 */ #define SCCR_MASK 0 -#if CONFIG_EBDF +#ifdef CONFIG_EBDF #define CFG_SCCR (SCCR_COM11 | SCCR_TBS | SCCR_EBDF01) #else #define CFG_SCCR (SCCR_COM11 | SCCR_TBS) diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index eefb8a6ece..618b25ae2d 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -156,14 +156,14 @@ #define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ #else -/* REVISIT: This doesn't work on ADS GCPlus just yet: +/* REVISIT: This doesn't work on ADS GCPlus just yet: */ #define CFG_FLASH_CFI 1 /* flash is CFI conformant */ #define CFG_FLASH_CFI_DRIVER 1 /* use common cfi driver */ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ #define CFG_MAX_FLASH_BANKS 1 /* max # of memory banks */ #define CFG_FLASH_INCREMENT 0 /* there is only one bank */ #define CFG_MAX_FLASH_SECT 128 /* max # of sectors on one chip */ -//#define CFG_FLASH_PROTECTION 1 /* hardware flash protection */ +/*#define CFG_FLASH_PROTECTION 1 /--* hardware flash protection */ #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } #endif diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index e6b5941212..1f0792f820 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -52,6 +52,7 @@ * Size of malloc() pool */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * PL010 Configuration @@ -63,9 +64,9 @@ #define CFG_SERIAL0 0x16000000 #define CFG_SERIAL1 0x17000000 -//#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI) -//#define CONFIG_NET_MULTI -//#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT +/*#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI) */ +/*#define CONFIG_NET_MULTI */ +/*#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */ #define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) @@ -74,7 +75,7 @@ #include #define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty" +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty" #define CONFIG_BOOTCOMMAND "" /* @@ -129,7 +130,7 @@ * PCI definitions */ -//#define CONFIG_PCI /* include pci support */ +/*#define CONFIG_PCI /--* include pci support */ #undef CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ #define DEBUG @@ -141,28 +142,28 @@ #define INTEGRATOR_BOOT_ROM_BASE 0x20000000 #define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000 -// PCI Base area +/* PCI Base area */ #define INTEGRATOR_PCI_BASE 0x40000000 #define INTEGRATOR_PCI_SIZE 0x3FFFFFFF -// memory map as seen by the CPU on the local bus -#define CPU_PCI_IO_ADRS 0x60000000 // PCI I/O space base -#define CPU_PCI_IO_SIZE 0x10000 +/* memory map as seen by the CPU on the local bus */ +#define CPU_PCI_IO_ADRS 0x60000000 /* PCI I/O space base */ +#define CPU_PCI_IO_SIZE 0x10000 -#define CPU_PCI_CNFG_ADRS 0x61000000 // PCI config space +#define CPU_PCI_CNFG_ADRS 0x61000000 /* PCI config space */ #define CPU_PCI_CNFG_SIZE 0x1000000 -#define PCI_MEM_BASE 0x40000000 // 512M to xxx -// unused 256M from A0000000-AFFFFFFF might be used for I2O ??? -#define INTEGRATOR_PCI_IO_BASE 0x60000000 // 16M to xxx -// unused (128-16)M from B1000000-B7FFFFFF -#define PCI_CONFIG_BASE 0x61000000 // 16M to xxx -// unused ((128-16)M - 64K) from XXX +#define PCI_MEM_BASE 0x40000000 /* 512M to xxx */ +/* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */ +#define INTEGRATOR_PCI_IO_BASE 0x60000000 /* 16M to xxx */ +/* unused (128-16)M from B1000000-B7FFFFFF */ +#define PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */ +/* unused ((128-16)M - 64K) from XXX */ #define PCI_V3_BASE 0x62000000 -// V3 PCI bridge controller -#define V3_BASE 0x62000000 // V360EPC registers +/* V3 PCI bridge controller */ +#define V3_BASE 0x62000000 /* V360EPC registers */ #define PCI_ENET0_IOADDR (CPU_PCI_IO_ADRS) #define PCI_ENET0_MEMADDR (PCI_MEM_BASE) @@ -221,16 +222,16 @@ #define V3_MAIL_RD_STAT 0x000000DA #define V3_QBA_MAP 0x000000DC -// SYSTEM register bits +/* SYSTEM register bits */ #define V3_SYSTEM_M_RST_OUT (1 << 15) #define V3_SYSTEM_M_LOCK (1 << 14) -// PCI_CFG bits +/* PCI_CFG bits */ #define V3_PCI_CFG_M_RETRY_EN (1 << 10) #define V3_PCI_CFG_M_AD_LOW1 (1 << 9) #define V3_PCI_CFG_M_AD_LOW0 (1 << 8) -// PCI MAP register bits (PCI -> Local bus) +/* PCI MAP register bits (PCI -> Local bus) */ #define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 #define V3_PCI_MAP_M_RD_POST_INH (1 << 15) #define V3_PCI_MAP_M_ROM_SIZE (1 << 11 | 1 << 10) @@ -239,20 +240,20 @@ #define V3_PCI_MAP_M_REG_EN (1 << 1) #define V3_PCI_MAP_M_ENABLE (1 << 0) -// 9 => 512M window size +/* 9 => 512M window size */ #define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090 -// A => 1024M window size +/* A => 1024M window size */ #define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0 -// LB_BASE register bits (Local bus -> PCI) +/* LB_BASE register bits (Local bus -> PCI) */ #define V3_LB_BASE_M_MAP_ADR 0xFFF00000 #define V3_LB_BASE_M_SWAP (1 << 8 | 1 << 9) #define V3_LB_BASE_M_ADR_SIZE 0x000000F0 #define V3_LB_BASE_M_PREFETCH (1 << 3) #define V3_LB_BASE_M_ENABLE (1 << 0) -// PCI COMMAND REGISTER bits +/* PCI COMMAND REGISTER bits */ #define V3_COMMAND_M_FBB_EN (1 << 9) #define V3_COMMAND_M_SERR_EN (1 << 8) #define V3_COMMAND_M_PAR_EN (1 << 6) diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 3fcb8af570..eb814e7d67 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -52,6 +52,7 @@ * Size of malloc() pool */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -78,7 +79,7 @@ #include #define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0" +#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0" #define CONFIG_BOOTCOMMAND "bootp ; bootm" /* diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index 8fc7c306d9..38aaf19d75 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -241,7 +241,7 @@ #define CONFIG_BOOT_ROOT_INITRD 0 /* Use ram disk for the root file system */ #define CONFIG_BOOT_ROOT_NFS 1 /* Use a NFS mounted root file system */ -#if CONFIG_BOOT_ROOT_INITRD +#ifdef CONFIG_BOOT_ROOT_INITRD #define CONFIG_BOOTCOMMAND \ "version;" \ "echo;" \ @@ -251,7 +251,7 @@ "bootm" #endif /* CONFIG_BOOT_ROOT_INITRD */ -#if CONFIG_BOOT_ROOT_NFS +#ifdef CONFIG_BOOT_ROOT_NFS #define CONFIG_BOOTCOMMAND \ "version;" \ "echo;" \ diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 4411a11398..0e6be34fe5 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -446,7 +446,7 @@ #define CONFIG_BOOT_ROOT_INITRD 0 /* Use ram disk for the root file system */ #define CONFIG_BOOT_ROOT_NFS 1 /* Use a NFS mounted root file system */ -#if CONFIG_BOOT_ROOT_INITRD +#ifdef CONFIG_BOOT_ROOT_INITRD #define CONFIG_BOOTCOMMAND \ "version;" \ "echo;" \ @@ -457,7 +457,7 @@ "bootm" #endif /* CONFIG_BOOT_ROOT_INITRD */ -#if CONFIG_BOOT_ROOT_NFS +#ifdef CONFIG_BOOT_ROOT_NFS #define CONFIG_BOOTCOMMAND \ "version;" \ "echo;" \ diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index ef96e72771..2414093dd7 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -392,7 +392,7 @@ #define CONFIG_BOOT_ROOT_INITRD 0 /* Use ram disk for the root file system */ #define CONFIG_BOOT_ROOT_NFS 1 /* Use a NFS mounted root file system */ -#if CONFIG_BOOT_ROOT_INITRD +#ifdef CONFIG_BOOT_ROOT_INITRD #define CONFIG_BOOTCOMMAND \ "version;" \ "echo;" \ @@ -402,7 +402,7 @@ "bootm" #endif /* CONFIG_BOOT_ROOT_INITRD */ -#if CONFIG_BOOT_ROOT_NFS +#ifdef CONFIG_BOOT_ROOT_NFS #define CONFIG_BOOTCOMMAND \ "version;" \ "echo;" \ diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 58ed25b357..5391439537 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -72,6 +72,7 @@ * Size of malloc() pool */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -94,7 +95,7 @@ #define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_MEMORY) -//#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) +/*#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) */ #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT @@ -102,15 +103,15 @@ #include #define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0" -//#define CONFIG_BOOTCOMMAND "bootp ; bootm" +#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0" +/*#define CONFIG_BOOTCOMMAND "bootp ; bootm" */ /* * Static configuration when assigning fixed address */ -//#define CONFIG_NETMASK 255.255.255.0 /* talk on MY local net */ -//#define CONFIG_IPADDR xx.xx.xx.xx /* static IP I currently own */ -//#define CONFIG_SERVERIP xx.xx.xx.xx /* current IP of my dev pc */ +/*#define CONFIG_NETMASK 255.255.255.0 /--* talk on MY local net */ +/*#define CONFIG_IPADDR xx.xx.xx.xx /--* static IP I currently own */ +/*#define CONFIG_SERVERIP xx.xx.xx.xx /--* current IP of my dev pc */ #define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */ diff --git a/include/ide.h b/include/ide.h index 3af12c8db2..dfef32f267 100644 --- a/include/ide.h +++ b/include/ide.h @@ -38,7 +38,7 @@ #endif /* CONFIG_IDE_LED */ -#if CFG_64BIT_LBA +#ifdef CFG_64BIT_LBA typedef uint64_t lbaint_t; #else typedef ulong lbaint_t; diff --git a/include/part.h b/include/part.h index c24f90920a..73000a7db2 100644 --- a/include/part.h +++ b/include/part.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000, 2001 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -12,7 +12,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -25,22 +25,25 @@ typedef struct block_dev_desc { - int if_type; /* type of the interface */ - int dev; /* device number */ - unsigned char part_type; /* partition type */ - unsigned char target; /* target SCSI ID */ - unsigned char lun; /* target LUN */ - unsigned char type; /* device type */ - unsigned long lba; /* number of blocks */ - unsigned long blksz; /* block size */ - unsigned char vendor[40]; /* IDE model, SCSI Vendor */ - unsigned char product[20];/* IDE Serial no, SCSI product */ - unsigned char revision[8];/* firmware revision */ - unsigned char removable; /* removable device */ - unsigned long (*block_read)(int dev, - unsigned long start, - unsigned long blkcnt, - unsigned long *buffer); + int if_type; /* type of the interface */ + int dev; /* device number */ + unsigned char part_type; /* partition type */ + unsigned char target; /* target SCSI ID */ + unsigned char lun; /* target LUN */ + unsigned char type; /* device type */ + unsigned char removable; /* removable device */ +#ifdef CONFIG_LBA48 + unsigned char lba48; /* device can use 48bit addr (ATA/ATAPI v7) */ +#endif + unsigned long lba; /* number of blocks */ + unsigned long blksz; /* block size */ + unsigned char vendor[40]; /* IDE model, SCSI Vendor */ + unsigned char product[20]; /* IDE Serial no, SCSI product */ + unsigned char revision[8]; /* firmware revision */ + unsigned long (*block_read)(int dev, + unsigned long start, + unsigned long blkcnt, + unsigned long *buffer); }block_dev_desc_t; /* Interface types: */ @@ -53,11 +56,11 @@ typedef struct block_dev_desc { #define IF_TYPE_MMC 6 /* Part types */ -#define PART_TYPE_UNKNOWN 0x00 +#define PART_TYPE_UNKNOWN 0x00 #define PART_TYPE_MAC 0x01 #define PART_TYPE_DOS 0x02 #define PART_TYPE_ISO 0x03 -#define PART_TYPE_AMIGA 0x04 +#define PART_TYPE_AMIGA 0x04 /* * Type string for U-Boot bootable partitions @@ -68,11 +71,11 @@ typedef struct block_dev_desc { /* device types */ #define DEV_TYPE_UNKNOWN 0xff /* not connected */ #define DEV_TYPE_HARDDISK 0x00 /* harddisk */ -#define DEV_TYPE_TAPE 0x01 /* Tape */ -#define DEV_TYPE_CDROM 0x05 /* CD-ROM */ -#define DEV_TYPE_OPDISK 0x07 /* optical disk */ +#define DEV_TYPE_TAPE 0x01 /* Tape */ +#define DEV_TYPE_CDROM 0x05 /* CD-ROM */ +#define DEV_TYPE_OPDISK 0x07 /* optical disk */ -typedef struct disk_partition { +typedef struct disk_partition { ulong start; /* # of first block in partition */ ulong size; /* number of blocks in partition */ ulong blksz; /* block size in bytes */ diff --git a/lib_generic/vsprintf.c b/lib_generic/vsprintf.c index 3fefd61bd9..2740f2e769 100644 --- a/lib_generic/vsprintf.c +++ b/lib_generic/vsprintf.c @@ -55,7 +55,7 @@ long simple_strtol(const char *cp,char **endp,unsigned int base) return simple_strtoul(cp,endp,base); } -#if CFG_64BIT_STRTOUL +#ifdef CFG_64BIT_STRTOUL unsigned long long simple_strtoull (const char *cp, char **endp, unsigned int base) { unsigned long long result = 0, value; @@ -112,7 +112,7 @@ static int skip_atoi(const char **s) __res; \ }) -#if CFG_64BIT_VSPRINTF +#ifdef CFG_64BIT_VSPRINTF static char * number(char * str, long long num, int base, int size, int precision ,int type) #else static char * number(char * str, long num, int base, int size, int precision ,int type) @@ -188,7 +188,7 @@ int sprintf(char * buf, const char *fmt, ...); int vsprintf(char *buf, const char *fmt, va_list args) { int len; -#if CFG_64BIT_VSPRINTF +#ifdef CFG_64BIT_VSPRINTF unsigned long long num; #else unsigned long num; @@ -337,7 +337,7 @@ int vsprintf(char *buf, const char *fmt, va_list args) --fmt; continue; } -#if CFG_64BIT_VSPRINTF +#ifdef CFG_64BIT_VSPRINTF if (qualifier == 'q') /* "quad" for 64 bit variables */ num = va_arg(args, unsigned long long); else diff --git a/lib_i386/board.c b/lib_i386/board.c index 25ad670697..b26d3d5eb1 100644 --- a/lib_i386/board.c +++ b/lib_i386/board.c @@ -343,7 +343,7 @@ void start_i386boot (void) /* Must happen after interrupts are initialized since * an irq handler gets installed */ -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO serial_buffered_init(); #endif diff --git a/lib_m68k/board.c b/lib_m68k/board.c index 6ef8b91b6b..06b3bd5056 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -577,7 +577,7 @@ void board_init_r (gd_t *id, ulong dest_addr) */ timer_init(); -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO serial_buffered_init(); #endif diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 0d2a00e245..a85425c312 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -874,7 +874,7 @@ void board_init_r (gd_t *id, ulong dest_addr) /* Must happen after interrupts are initialized since * an irq handler gets installed */ -#if CONFIG_SERIAL_SOFTWARE_FIFO +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO serial_buffered_init(); #endif -- cgit v1.2.3