From 0442ed869c2a063936532136e39794ff9715e287 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 3 Nov 2002 10:24:00 +0000 Subject: Initial revision --- board/csb226/memsetup.S | 428 ++++++++++ cpu/ppc4xx/start.S | 1425 ++++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/pxa-regs.h | 1133 +++++++++++++++++++++++++ include/asm-arm/arch-xscale/pxa-regs.h | 1133 +++++++++++++++++++++++++ include/ppc405.h | 400 +++++++++ 5 files changed, 4519 insertions(+) create mode 100644 board/csb226/memsetup.S create mode 100644 cpu/ppc4xx/start.S create mode 100644 include/asm-arm/arch-pxa/pxa-regs.h create mode 100644 include/asm-arm/arch-xscale/pxa-regs.h create mode 100644 include/ppc405.h diff --git a/board/csb226/memsetup.S b/board/csb226/memsetup.S new file mode 100644 index 0000000000..5a584c1538 --- /dev/null +++ b/board/csb226/memsetup.S @@ -0,0 +1,428 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/memsetup.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + +/* + * Memory setup + */ + +.globl memsetup +memsetup: + + mov r10, lr + + /* Set up GPIO pins first ----------------------------------------- */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + ldr r0, =PSSR /* enable GPIO pins */ + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + +/* ldr r3, =MSC1 / low - bank 2 Lubbock Registers / SRAM */ +/* ldr r2, =CFG_MSC1_VAL / high - bank 3 Ethernet Controller */ +/* str r2, [r3] / need to set MSC1 before trying to write to the HEX LEDs */ +/* ldr r2, [r3] / need to read it back to make sure the value latches (see MSC section of manual) */ +/* */ +/* ldr r1, =LED_BLANK */ +/* mov r0, #0xFF */ +/* str r0, [r1] / turn on hex leds */ +/* */ +/*loop: */ +/* */ +/* ldr r0, =0xB0070001 */ +/* ldr r1, =_LED */ +/* str r0, [r1] / hex display */ + + + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ + /* The sequence below is based on the recommended init steps */ + /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ + /* Chapter 10. */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 1: Wait for at least 200 microsedonds to allow internal */ + /* clocks to settle. Only necessary after hard reset... */ + /* FIXME: can be optimized later */ + /* ---------------------------------------------------------------- */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + + ldr r1, =MEMC_BASE /* get memory controller base addr. */ + + /* ---------------------------------------------------------------- */ + /* Step 2a: Initialize Asynchronous static memory controller */ + /* ---------------------------------------------------------------- */ + + /* MSC registers: timing, bus width, mem type */ + + /* MSC0: nCS(0,1) */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ + /* that data latches */ + /* MSC1: nCS(2,3) */ + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + /* MSC2: nCS(4,5) */ + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2b: Initialize Card Interface */ + /* ---------------------------------------------------------------- */ + + /* MECR: Memory Expansion Card Register */ + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + ldr r2, [r1, #MECR_OFFSET] + + /* MCMEM0: Card Interface slot 0 timing */ + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + ldr r2, [r1, #MCMEM0_OFFSET] + + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + ldr r2, [r1, #MCMEM1_OFFSET] + + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + ldr r2, [r1, #MCATT0_OFFSET] + + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + ldr r2, [r1, #MCATT1_OFFSET] + + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + ldr r2, [r1, #MCIO0_OFFSET] + + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + ldr r2, [r1, #MCIO1_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ + + + /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ + + /* Before accessing MDREFR we need a valid DRI field, so we set */ + /* this to power on defaults + DIR field. */ + + ldr r4, =0x03ca4fff + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + ldr r4, =0x03ca4030 + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + /* Note: preserve the mdrefr value in r4 */ + + + /* ---------------------------------------------------------------- */ + /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ + /* ---------------------------------------------------------------- */ + + /* Initialize SXCNFG register. Assert the enable bits */ + + /* Write SXMRS to cause an MRS command to all enabled banks of */ + /* synchronous static memory. Note that SXLCR need not be written */ + /* at this time. */ + + /* FIXME: we use async mode for now */ + + + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ + + /* Step 4a: assert MDREFR:K1RUN and MDREFR:K2RUN and configure */ + /* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */ + + orr r4, r4, #(MDREFR_K1RUN|MDREFR_K2RUN|MDREFR_K0RUN) + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4b: de-assert MDREFR:SLFRSH. */ + + bic r4, r4, #(MDREFR_SLFRSH) + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4c: assert MDREFR:E1PIN and E0PIO */ + + orr r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ + /* configure but not enable each SDRAM partition pair. */ + + ldr r4, [r1, #MDCNFG_OFFSET] + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) + + str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ + ldr r4, [r1, #MDCNFG_OFFSET] + + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ + /* 100..200 µsec. */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + + /* Step 4f: Trigger a number (usually 8) refresh cycles by */ + /* attempting non-burst read or write accesses to disabled */ + /* SDRAM, as commonly specified in the power up sequence */ + /* documented in SDRAM data sheets. The address(es) used */ + /* for this purpose must not be cacheable. */ + + ldr r3, =CFG_DRAM_BASE + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + + + /* Step 4g: Write MDCNFG with enable bits asserted */ + /* (MDCNFG:DEx set to 1). */ + + ldr r3, [r1, #MDCNFG_OFFSET] + orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) + str r3, [r1, #MDCNFG_OFFSET] + + /* Step 4h: Write MDMRS. */ + + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + + /* We are finished with Intel's memory controller initialisation */ + + + /* ---------------------------------------------------------------- */ + /* Disable (mask) all interrupts at interrupt controller */ + /* ---------------------------------------------------------------- */ + +initirqs: + + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] + + ldr r2, =ICMR /* mask all interrupts at the controller */ + str r1, [r2] + + + /* ---------------------------------------------------------------- */ + /* Clock initialisation */ + /* ---------------------------------------------------------------- */ + +initclks: + + /* Disable the peripheral clocks, and set the core clock frequency */ + /* (hard-coding at 398.12MHz for now). */ + + /* Turn Off ALL on-chip peripheral clocks for re-configuration */ + /* Note: See label 'ENABLECLKS' for the re-enabling */ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + + + /* default value in case no valid rotary switch setting is found */ + ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ + + /* ... and write the core clock config register */ + ldr r1, =CCCR + str r2, [r1] + + /* enable the 32Khz oscillator for RTC and PowerManager */ + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + + /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ + /* has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b + + /* ---------------------------------------------------------------- */ + /* */ + /* ---------------------------------------------------------------- */ + + /* Save SDRAM size */ + ldr r1, =DRAM_SIZE + str r8, [r1] + + /* Interrupt init: Mask all interrupts */ + ldr r0, =ICMR /* enable no sources */ + mov r1, #0 + str r1, [r0] + + /* FIXME */ + +#define NODEBUG +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ + +#endif + + /* ---------------------------------------------------------------- */ + /* End memsetup */ + /* ---------------------------------------------------------------- */ + +endmemsetup: + + mov pc, lr + diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S new file mode 100644 index 0000000000..baaaba4fab --- /dev/null +++ b/cpu/ppc4xx/start.S @@ -0,0 +1,1425 @@ +/* + * Copyright (C) 1998 Dan Malek + * Copyright (C) 1999 Magnus Damm + * Copyright (C) 2000,2001,2002 Wolfgang Denk + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/*------------------------------------------------------------------------------+ */ +/* */ +/* This source code has been made available to you by IBM on an AS-IS */ +/* basis. Anyone receiving this source is licensed under IBM */ +/* copyrights to use it in any way he or she deems fit, including */ +/* copying it, modifying it, compiling it, and redistributing it either */ +/* with or without modifications. No license under IBM patents or */ +/* patent applications is to be implied by the copyright license. */ +/* */ +/* Any user of this software should understand that IBM cannot provide */ +/* technical support for this software and will not be responsible for */ +/* any consequences resulting from the use of this software. */ +/* */ +/* Any person who transfers this source code or any derivative work */ +/* must include the IBM copyright notice, this paragraph, and the */ +/* preceding two paragraphs in the transferred software. */ +/* */ +/* COPYRIGHT I B M CORPORATION 1995 */ +/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */ +/*------------------------------------------------------------------------------- */ + +/* U-Boot - Startup Code for IBM 4xx PowerPC based Embedded Boards + * + * + * The processor starts at 0xfffffffc and the code is executed + * from flash/rom. + * in memory, but as long we don't jump around before relocating. + * board_init lies at a quite high address and when the cpu has + * jumped there, everything is ok. + * This works because the cpu gives the FLASH (CS0) the whole + * address space at startup, and board_init lies as a echo of + * the flash somewhere up there in the memorymap. + * + * board_init will change CS0 to be positioned at the correct + * address and (s)dram will be positioned at address 0 + */ +#include +#include +#include +#include + +#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ + +#include +#include + +#include +#include + +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" +#endif + +#ifdef CFG_INIT_DCACHE_CS +# if (CFG_INIT_DCACHE_CS == 0) +# define PBxAP pb0ap +# define PBxCR pb0cr +# endif +# if (CFG_INIT_DCACHE_CS == 1) +# define PBxAP pb1ap +# define PBxCR pb1cr +# endif +# if (CFG_INIT_DCACHE_CS == 2) +# define PBxAP pb2ap +# define PBxCR pb2cr +# endif +# if (CFG_INIT_DCACHE_CS == 3) +# define PBxAP pb3ap +# define PBxCR pb3cr +# endif +# if (CFG_INIT_DCACHE_CS == 4) +# define PBxAP pb4ap +# define PBxCR pb4cr +# endif +# if (CFG_INIT_DCACHE_CS == 5) +# define PBxAP pb5ap +# define PBxCR pb5cr +# endif +# if (CFG_INIT_DCACHE_CS == 6) +# define PBxAP pb6ap +# define PBxCR pb6cr +# endif +# if (CFG_INIT_DCACHE_CS == 7) +# define PBxAP pb7ap +# define PBxCR pb7cr +# endif +#endif /* CFG_INIT_DCACHE_CS */ + +/* We don't want the MMU yet. +*/ +#undef MSR_KERNEL +#define MSR_KERNEL ( MSR_ME ) /* Machine Check */ + + + .extern ext_bus_cntlr_init + .extern sdram_init + +/* + * Set up GOT: Global Offset Table + * + * Use r14 to access the GOT + */ + START_GOT + GOT_ENTRY(_GOT2_TABLE_) + GOT_ENTRY(_FIXUP_TABLE_) + + GOT_ENTRY(_start) + GOT_ENTRY(_start_of_vectors) + GOT_ENTRY(_end_of_vectors) + GOT_ENTRY(transfer_to_handler) + + GOT_ENTRY(_end) + GOT_ENTRY(.bss) + END_GOT + +/* + * 440 Startup -- on reset only the top 4k of the effective + * address space is mapped in by an entry in the instruction + * and data shadow TLB. The .bootpg section is located in the + * top 4k & does only what's necessary to map in the the rest + * of the boot rom. Once the boot rom is mapped in we can + * proceed with normal startup. + * + * NOTE: CS0 only covers the top 2MB of the effective address + * space after reset. + */ + +#if defined(CONFIG_440) + .section .bootpg,"ax" + .globl _start_440 + +/**************************************************************************/ +_start_440: + /*----------------------------------------------------------------*/ + /* Clear and set up some registers. */ + /*----------------------------------------------------------------*/ + iccci r0,r0 /* NOTE: operands not used for 440 */ + dccci r0,r0 /* NOTE: operands not used for 440 */ + sync + li r0,0 + mtspr srr0,r0 + mtspr srr1,r0 + mtspr csrr0,r0 + mtspr csrr1,r0 + + /*----------------------------------------------------------------*/ + /* Initialize debug */ + /*----------------------------------------------------------------*/ + mtspr dbcr0,r0 + mtspr dbcr1,r0 + mtspr dbcr2,r0 + mtspr iac1,r0 + mtspr iac2,r0 + mtspr iac3,r0 + mtspr dac1,r0 + mtspr dac2,r0 + mtspr dvc1,r0 + mtspr dvc2,r0 + + mfspr r1,dbsr + mtspr dbsr,r1 /* Clear all valid bits */ + + /*----------------------------------------------------------------*/ + /* CCR0 init */ + /*----------------------------------------------------------------*/ + /* Disable store gathering & broadcast, guarantee inst/data + * cache block touch, force load/store alignment + * (see errata 1.12: 440_33) + */ + lis r1,0x0030 /* store gathering & broadcast disable */ + ori r1,r1,0x6000 /* cache touch */ + mtspr ccr0,r1 + + /*----------------------------------------------------------------*/ + /* Setup interrupt vectors */ + /*----------------------------------------------------------------*/ + mtspr ivpr,r0 /* Vectors start at 0x0000_0000 */ + li r1,0x0100 + mtspr ivor0,r1 /* Critical input */ + li r1,0x0200 + mtspr ivor1,r1 /* Machine check */ + li r1,0x0300 + mtspr ivor2,r1 /* Data storage */ + li r1,0x0400 + mtspr ivor3,r1 /* Instruction storage */ + li r1,0x0500 + mtspr ivor4,r1 /* External interrupt */ + li r1,0x0600 + mtspr ivor5,r1 /* Alignment */ + li r1,0x0700 + mtspr ivor6,r1 /* Program check */ + li r1,0x0800 + mtspr ivor7,r1 /* Floating point unavailable */ + li r1,0x0c00 + mtspr ivor8,r1 /* System call */ + li r1,0x1000 + mtspr ivor10,r1 /* Decrementer (PIT for 440) */ + li r1,0x1400 + mtspr ivor13,r1 /* Data TLB error */ + li r1,0x1300 + mtspr ivor14,r1 /* Instr TLB error */ + li r1,0x2000 + mtspr ivor15,r1 /* Debug */ + + /*----------------------------------------------------------------*/ + /* Configure cache regions */ + /*----------------------------------------------------------------*/ + mtspr inv0,r0 + mtspr inv1,r0 + mtspr inv2,r0 + mtspr inv3,r0 + mtspr dnv0,r0 + mtspr dnv1,r0 + mtspr dnv2,r0 + mtspr dnv3,r0 + mtspr itv0,r0 + mtspr itv1,r0 + mtspr itv2,r0 + mtspr itv3,r0 + mtspr dtv0,r0 + mtspr dtv1,r0 + mtspr dtv2,r0 + mtspr dtv3,r0 + + /*----------------------------------------------------------------*/ + /* Cache victim limits */ + /*----------------------------------------------------------------*/ + /* floors 0, ceiling max to use the entire cache -- nothing locked + */ + lis r1,0x0001 + ori r1,r1,0xf800 + mtspr ivlim,r1 + mtspr dvlim,r1 + + /*----------------------------------------------------------------*/ + /* Clear all TLB entries -- TID = 0, TS = 0 */ + /*----------------------------------------------------------------*/ + mtspr mmucr,r0 + li r1,0x003f /* 64 TLB entries */ + mtctr r1 +0: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ + subi r1,r1,0x0001 + bdnz 0b + + /*----------------------------------------------------------------*/ + /* TLB entry setup -- step thru tlbtab */ + /*----------------------------------------------------------------*/ + bl tlbtab /* Get tlbtab pointer */ + mr r5,r0 + li r1,0x003f /* 64 TLB entries max */ + mtctr r1 + li r4,0 /* TLB # */ + + addi r5,r5,-4 +1: lwzu r0,4(r5) + cmpwi r0,0 + beq 2f /* 0 marks end */ + lwzu r1,4(r5) + lwzu r2,4(r5) + tlbwe r0,r4,0 /* TLB Word 0 */ + tlbwe r1,r4,1 /* TLB Word 1 */ + tlbwe r2,r4,2 /* TLB Word 2 */ + addi r4,r4,1 /* Next TLB */ + bdnz 1b + + /*----------------------------------------------------------------*/ + /* Continue from 'normal' start */ + /*----------------------------------------------------------------*/ +2: bl 3f + b _start + +3: li r0,0 + mtspr srr1,r0 /* Keep things disabled for now */ + mflr r1 + mtspr srr0,r1 + rfi +#endif + +/* + * r3 - 1st arg to board_init(): IMMP pointer + * r4 - 2nd arg to board_init(): boot flag + */ + .text + .long 0x27051956 /* U-Boot Magic Number */ + .globl version_string +version_string: + .ascii U_BOOT_VERSION + .ascii " (", __DATE__, " - ", __TIME__, ")" + .ascii CONFIG_IDENT_STRING, "\0" + +/* + * Maybe this should be moved somewhere else because the current + * location (0x100) is where the CriticalInput Execption should be. + */ + . = EXC_OFF_SYS_RESET + .globl _start +_start: + +/*****************************************************************************/ +#if defined(CONFIG_440) + + /*----------------------------------------------------------------*/ + /* Clear and set up some registers. */ + /*----------------------------------------------------------------*/ + li r0,0x0000 + lis r1,0xffff + mtspr dec,r0 /* prevent dec exceptions */ + mtspr tbl,r0 /* prevent fit & wdt exceptions */ + mtspr tbu,r0 + mtspr tsr,r1 /* clear all timer exception status */ + mtspr tcr,r0 /* disable all */ + mtspr esr,r0 /* clear exception syndrome register */ + mtxer r0 /* clear integer exception register */ + lis r1,0x0002 /* set CE bit (Critical Exceptions) */ + ori r1,r1,0x1000 /* set ME bit (Machine Exceptions) */ + mtmsr r1 /* change MSR */ + + /*----------------------------------------------------------------*/ + /* Debug setup -- some (not very good) ice's need an event*/ + /* to establish control :-( Define CFG_INIT_DBCR to the dbsr */ + /* value you need in this case 0x8cff 0000 should do the trick */ + /*----------------------------------------------------------------*/ +#if defined(CFG_INIT_DBCR) + lis r1,0xffff + ori r1,r1,0xffff + mtspr dbsr,r1 /* Clear all status bits */ + lis r0,CFG_INIT_DBCR@h + ori r0,r0,CFG_INIT_DBCR@l + mtspr dbcr0,r0 + isync +#endif + + /*----------------------------------------------------------------*/ + /* Setup the internal SRAM */ + /*----------------------------------------------------------------*/ + li r0,0 + mtdcr isram0_sb1cr,r0 /* Disable bank 1 */ + + li r2,0x7fff + ori r2,r2,0xffff + mfdcr r1,isram0_dpc + and r1,r1,r2 /* Disable parity check */ + mtdcr isram0_dpc,r1 + mfdcr r1,isram0_pmeg + andis. r1,r1,r2 /* Disable pwr mgmt */ + mtdcr isram0_pmeg,r1 + + lis r1,0x8000 /* BAS = 8000_0000 */ + ori r1,r1,0x0380 /* 8k rw */ + mtdcr isram0_sb0cr,r1 + + /*----------------------------------------------------------------*/ + /* Setup the stack in internal SRAM */ + /*----------------------------------------------------------------*/ + lis r1,CFG_INIT_RAM_ADDR@h + ori r1,r1,CFG_INIT_SP_OFFSET@l + + li r0,0 + stwu r0,-4(r1) + stwu r0,-4(r1) /* Terminate call chain */ + + stwu r1,-8(r1) /* Save back chain and move SP */ + lis r0,RESET_VECTOR@h /* Address of reset vector */ + ori r0,r0, RESET_VECTOR@l + stwu r1,-8(r1) /* Save back chain and move SP */ + stw r0,+12(r1) /* Save return addr (underflow vect) */ + + GET_GOT + bl board_init_f + +#endif /* CONFIG_440 */ + +/*****************************************************************************/ +#ifdef CONFIG_IOP480 + /*----------------------------------------------------------------------- */ + /* Set up some machine state registers. */ + /*----------------------------------------------------------------------- */ + addi r0,r0,0x0000 /* initialize r0 to zero */ + mtspr esr,r0 /* clear Exception Syndrome Reg */ + mttcr r0 /* timer control register */ + mtexier r0 /* disable all interrupts */ + addi r4,r0,0x1000 /* set ME bit (Machine Exceptions) */ + oris r4,r4,0x2 /* set CE bit (Critical Exceptions) */ + mtmsr r4 /* change MSR */ + addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */ + ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */ + mtdbsr r4 /* clear/reset the dbsr */ + mtexisr r4 /* clear all pending interrupts */ + addis r4,r0,0x8000 + mtexier r4 /* enable critical exceptions */ + addis r4,r0,0x0000 /* assume 403GCX - enable core clk */ + ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */ + mtiocr r4 /* since bit not used) & DRC to latch */ + /* data bus on rising edge of CAS */ + /*----------------------------------------------------------------------- */ + /* Clear XER. */ + /*----------------------------------------------------------------------- */ + mtxer r0 + /*----------------------------------------------------------------------- */ + /* Invalidate i-cache and d-cache TAG arrays. */ + /*----------------------------------------------------------------------- */ + addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */ + addi r4,0,1024 /* 1/4 of I-cache */ +..cloop: + iccci 0,r3 + iccci r4,r3 + dccci 0,r3 + addic. r3,r3,-16 /* move back one cache line */ + bne ..cloop /* loop back to do rest until r3 = 0 */ + + /* */ + /* initialize IOP480 so it can read 1 MB code area for SRAM spaces */ + /* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */ + /* */ + + /* first copy IOP480 register base address into r3 */ + addis r3,0,0x5000 /* IOP480 register base address hi */ +/* ori r3,r3,0x0000 / IOP480 register base address lo */ + +#ifdef CONFIG_ADCIOP + /* use r4 as the working variable */ + /* turn on CS3 (LOCCTL.7) */ + lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */ + andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */ + stw r4,0x84(r3) /* LOCTL is at offset 0x84 */ +#endif + +#ifdef CONFIG_DASA_SIM + /* use r4 as the working variable */ + /* turn on MA17 (LOCCTL.7) */ + lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */ + ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */ + stw r4,0x84(r3) /* LOCTL is at offset 0x84 */ +#endif + + /* turn on MA16..13 (LCS0BRD.12 = 0) */ + lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */ + andi. r4,r4,0xefff /* make bit 12 = 0 */ + stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */ + + /* make sure above stores all comlete before going on */ + sync + + /* last thing, set local init status done bit (DEVINIT.31) */ + lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */ + oris r4,r4,0x8000 /* make bit 31 = 1 */ + stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */ + + /* clear all pending interrupts and disable all interrupts */ + li r4,-1 /* set p1 to 0xffffffff */ + stw r4,0x1b0(r3) /* clear all pending interrupts */ + stw r4,0x1b8(r3) /* clear all pending interrupts */ + li r4,0 /* set r4 to 0 */ + stw r4,0x1b4(r3) /* disable all interrupts */ + stw r4,0x1bc(r3) /* disable all interrupts */ + + /* make sure above stores all comlete before going on */ + sync + + /*----------------------------------------------------------------------- */ + /* Enable two 128MB cachable regions. */ + /*----------------------------------------------------------------------- */ + addis r1,r0,0x8000 + addi r1,r1,0x0001 + mticcr r1 /* instruction cache */ + + addis r1,r0,0x0000 + addi r1,r1,0x0000 + mtdccr r1 /* data cache */ + + addis r1,r0,CFG_INIT_RAM_ADDR@h + ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack to SDRAM */ + li r0, 0 /* Make room for stack frame header and */ + stwu r0, -4(r1) /* clear final stack frame so that */ + stwu r0, -4(r1) /* stack backtraces terminate cleanly */ + + GET_GOT /* initialize GOT access */ + + bl board_init_f /* run first part of init code (from Flash) */ + +#endif /* CONFIG_IOP480 */ + +/*****************************************************************************/ +#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) + /*----------------------------------------------------------------------- */ + /* Clear and set up some registers. */ + /*----------------------------------------------------------------------- */ + addi r4,r0,0x0000 + mtspr sgr,r4 + mtspr dcwr,r4 + mtesr r4 /* clear Exception Syndrome Reg */ + mttcr r4 /* clear Timer Control Reg */ + mtxer r4 /* clear Fixed-Point Exception Reg */ + mtevpr r4 /* clear Exception Vector Prefix Reg */ + addi r4,r0,0x1000 /* set ME bit (Machine Exceptions) */ + oris r4,r4,0x0002 /* set CE bit (Critical Exceptions) */ + mtmsr r4 /* change MSR */ + addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */ + /* dbsr is cleared by setting bits to 1) */ + mtdbsr r4 /* clear/reset the dbsr */ + + /*----------------------------------------------------------------------- */ + /* Invalidate I and D caches. Enable I cache for defined memory regions */ + /* to speed things up. Leave the D cache disabled for now. It will be */ + /* enabled/left disabled later based on user selected menu options. */ + /* Be aware that the I cache may be disabled later based on the menu */ + /* options as well. See miscLib/main.c. */ + /*----------------------------------------------------------------------- */ + bl invalidate_icache + bl invalidate_dcache + + /*----------------------------------------------------------------------- */ + /* Enable two 128MB cachable regions. */ + /*----------------------------------------------------------------------- */ + addis r4,r0,0x8000 + addi r4,r4,0x0001 + mticcr r4 /* instruction cache */ + isync + + addis r4,r0,0x0000 + addi r4,r4,0x0000 + mtdccr r4 /* data cache */ + +#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) + /*----------------------------------------------------------------------- */ + /* Tune the speed and size for flash CS0 */ + /*----------------------------------------------------------------------- */ + bl ext_bus_cntlr_init +#endif + +#if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE) + /******************************************************************** + * Setup OCM - On Chip Memory + *******************************************************************/ + /* Setup OCM */ + lis r0, 0x7FFF + ori r0, r0, 0xFFFF + mfdcr r3, ocmiscntl /* get instr-side IRAM config */ + mfdcr r4, ocmdscntl /* get data-side IRAM config */ + and r3, r3, r0 /* disable data-side IRAM */ + and r4, r4, r0 /* disable data-side IRAM */ + mtdcr ocmiscntl, r3 /* set instr-side IRAM config */ + mtdcr ocmdscntl, r4 /* set data-side IRAM config */ + isync + + addis r3, 0, CFG_OCM_DATA_ADDR@h /* OCM location */ + mtdcr ocmdsarc, r3 + addis r4, 0, 0xC000 /* OCM data area enabled */ + mtdcr ocmdscntl, r4 + isync +#endif + + /*----------------------------------------------------------------------- */ + /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */ + /*----------------------------------------------------------------------- */ +#ifdef CFG_INIT_DCACHE_CS + /*----------------------------------------------------------------------- */ + /* Memory Bank x (nothingness) initialization 1GB+64MEG */ + /* used as temporary stack pointer for stage0 */ + /*----------------------------------------------------------------------- */ + li r4,PBxAP + mtdcr ebccfga,r4 + lis r4,0x0380 + ori r4,r4,0x0480 + mtdcr ebccfgd,r4 + + addi r4,0,PBxCR + mtdcr ebccfga,r4 + lis r4,0x400D + ori r4,r4,0xa000 + mtdcr ebccfgd,r4 + + /* turn on data chache for this region */ + lis r4,0x0080 + mtdccr r4 + + /* set stack pointer and clear stack to known value */ + + lis r1,CFG_INIT_RAM_ADDR@h + ori r1,r1,CFG_INIT_SP_OFFSET@l + + li r4,2048 /* we store 2048 words to stack */ + mtctr r4 + + lis r2,CFG_INIT_RAM_ADDR@h /* we also clear data area */ + ori r2,r2,CFG_INIT_RAM_END@l /* so cant copy value from r1 */ + + lis r4,0xdead /* we store 0xdeaddead in the stack */ + ori r4,r4,0xdead + +..stackloop: + stwu r4,-4(r2) + bdnz ..stackloop + + li r0, 0 /* Make room for stack frame header and */ + stwu r0, -4(r1) /* clear final stack frame so that */ + stwu r0, -4(r1) /* stack backtraces terminate cleanly */ + /* + * Set up a dummy frame to store reset vector as return address. + * this causes stack underflow to reset board. + */ + stwu r1, -8(r1) /* Save back chain and move SP */ + addis r0, 0, RESET_VECTOR@h /* Address of reset vector */ + ori r0, r0, RESET_VECTOR@l + stwu r1, -8(r1) /* Save back chain and move SP */ + stw r0, +12(r1) /* Save return addr (underflow vect) */ + +#elif defined(CFG_TEMP_STACK_OCM) && \ + (defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE)) + /* + * Stack in OCM. + */ + + /* Set up Stack at top of OCM */ + lis r1, (CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET)@h + ori r1, r1, (CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET)@l + + /* Set up a zeroized stack frame so that backtrace works right */ + li r0, 0 + stwu r0, -4(r1) + stwu r0, -4(r1) + + /* + * Set up a dummy frame to store reset vector as return address. + * this causes stack underflow to reset board. + */ + stwu r1, -8(r1) /* Save back chain and move SP */ + lis r0, RESET_VECTOR@h /* Address of reset vector */ + ori r0, r0, RESET_VECTOR@l + stwu r1, -8(r1) /* Save back chain and move SP */ + stw r0, +12(r1) /* Save return addr (underflow vect) */ +#endif /* CFG_INIT_DCACHE_CS */ + + /*----------------------------------------------------------------------- */ + /* Initialize SDRAM Controller */ + /*----------------------------------------------------------------------- */ + bl sdram_init + + /* + * Setup temporary stack pointer only for boards + * that do not use SDRAM SPD I2C stuff since it + * is already initialized to use DCACHE or OCM + * stacks. + */ +#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM)) + lis r1, CFG_INIT_RAM_ADDR@h + ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */ + + li r0, 0 /* Make room for stack frame header and */ + stwu r0, -4(r1) /* clear final stack frame so that */ + stwu r0, -4(r1) /* stack backtraces terminate cleanly */ + /* + * Set up a dummy frame to store reset vector as return address. + * this causes stack underflow to reset board. + */ + stwu r1, -8(r1) /* Save back chain and move SP */ + lis r0, RESET_VECTOR@h /* Address of reset vector */ + ori r0, r0, RESET_VECTOR@l + stwu r1, -8(r1) /* Save back chain and move SP */ + stw r0, +12(r1) /* Save return addr (underflow vect) */ +#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */ + + GET_GOT /* initialize GOT access */ + + bl cpu_init_f /* run low-level CPU init code (from Flash) */ + + /* NEVER RETURNS! */ + bl board_init_f /* run first part of init code (from Flash) */ + +#endif /* CONFIG_405GP || CONFIG_405CR */ + + + .globl _start_of_vectors +_start_of_vectors: + +#if 0 +/*TODO Fixup _start above so we can do this*/ +/* Critical input. */ + CRIT_EXCEPTION(0x100, CritcalInput, CritcalInputException) +#endif + +/* Machine check */ + STD_EXCEPTION(0x200, MachineCheck, MachineCheckException) + +/* Data Storage exception. */ + STD_EXCEPTION(0x300, DataStorage, UnknownException) + +/* Instruction Storage exception. */ + STD_EXCEPTION(0x400, InstStorage, UnknownException) + +/* External Interrupt exception. */ + STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) + +/* Alignment exception. */ + . = 0x600 +Alignment: + EXCEPTION_PROLOG + mfspr r4,DAR + stw r4,_DAR(r21) + mfspr r5,DSISR + stw r5,_DSISR(r21) + addi r3,r1,STACK_FRAME_OVERHEAD + li r20,MSR_KERNEL + rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ + lwz r6,GOT(transfer_to_handler) + mtlr r6 + blrl +.L_Alignment: + .long AlignmentException - _start + EXC_OFF_SYS_RESET + .long int_return - _start + EXC_OFF_SYS_RESET + +/* Program check exception */ + . = 0x700 +ProgramCheck: + EXCEPTION_PROLOG + addi r3,r1,STACK_FRAME_OVERHEAD + li r20,MSR_KERNEL + rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ + lwz r6,GOT(transfer_to_handler) + mtlr r6 + blrl +.L_ProgramCheck: + .long ProgramCheckException - _start + EXC_OFF_SYS_RESET + .long int_return - _start + EXC_OFF_SYS_RESET + + /* No FPU on MPC8xx. This exception is not supposed to happen. + */ + STD_EXCEPTION(0x800, FPUnavailable, UnknownException) + + /* I guess we could implement decrementer, and may have + * to someday for timekeeping. + */ + STD_EXCEPTION(0x900, Decrementer, timer_interrupt) + STD_EXCEPTION(0xa00, Trap_0a, UnknownException) + STD_EXCEPTION(0xb00, Trap_0b, UnknownException) + + . = 0xc00 +/* + * r0 - SYSCALL number + * r3-... arguments + */ +SystemCall: + addis r11,r0,0 /* get functions table addr */ + ori r11,r11,0 /* Note: this code is patched in trap_init */ + addis r12,r0,0 /* get number of functions */ + ori r12,r12,0 + + cmplw 0, r0, r12 + bge 1f + + rlwinm r0,r0,2,0,31 /* fn_addr = fn_tbl[r0] */ + add r11,r11,r0 + lwz r11,0(r11) + + li r12,0xd00-4*3 /* save LR & SRRx */ + mflr r0 + stw r0,0(r12) + mfspr r0,SRR0 + stw r0,4(r12) + mfspr r0,SRR1 + stw r0,8(r12) + + li r12,0xc00+_back-SystemCall + mtlr r12 + mtspr SRR0,r11 + +1: SYNC + rfi + +_back: + + mfmsr r11 /* Disable interrupts */ + li r12,0 + ori r12,r12,MSR_EE + andc r11,r11,r12 + SYNC /* Some chip revs need this... */ + mtmsr r11 + SYNC + + li r12,0xd00-4*3 /* restore regs */ + lwz r11,0(r12) + mtlr r11 + lwz r11,4(r12) + mtspr SRR0,r11 + lwz r11,8(r12) + mtspr SRR1,r11 + + SYNC + rfi + + STD_EXCEPTION(0xd00, SingleStep, UnknownException) + + STD_EXCEPTION(0xe00, Trap_0e, UnknownException) + STD_EXCEPTION(0xf00, Trap_0f, UnknownException) + + /* On the MPC8xx, this is a software emulation interrupt. It occurs + * for all unimplemented and illegal instructions. + */ + STD_EXCEPTION(0x1000, PIT, PITException) + + STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException) + STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException) + STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException) + STD_EXCEPTION(0x1400, DataTLBError, UnknownException) + + STD_EXCEPTION(0x1500, Reserved5, UnknownException) + STD_EXCEPTION(0x1600, Reserved6, UnknownException) + STD_EXCEPTION(0x1700, Reserved7, UnknownException) + STD_EXCEPTION(0x1800, Reserved8, UnknownException) + STD_EXCEPTION(0x1900, Reserved9, UnknownException) + STD_EXCEPTION(0x1a00, ReservedA, UnknownException) + STD_EXCEPTION(0x1b00, ReservedB, UnknownException) + + STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException) + STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException) + STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException) + STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException) + + CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException ) + + .globl _end_of_vectors +_end_of_vectors: + + + . = 0x2100 + +/* + * This code finishes saving the registers to the exception frame + * and jumps to the appropriate handler for the exception. + * Register r21 is pointer into trap frame, r1 has new stack pointer. + */ + .globl transfer_to_handler +transfer_to_handler: + stw r22,_NIP(r21) + lis r22,MSR_POW@h + andc r23,r23,r22 + stw r23,_MSR(r21) + SAVE_GPR(7, r21) + SAVE_4GPRS(8, r21) + SAVE_8GPRS(12, r21) + SAVE_8GPRS(24, r21) +#if 0 + andi. r23,r23,MSR_PR + mfspr r23,SPRG3 /* if from user, fix up tss.regs */ + beq 2f + addi r24,r1,STACK_FRAME_OVERHEAD + stw r24,PT_REGS(r23) +2: addi r2,r23,-TSS /* set r2 to current */ + tovirt(r2,r2,r23) +#endif + mflr r23 + andi. r24,r23,0x3f00 /* get vector offset */ + stw r24,TRAP(r21) + li r22,0 + stw r22,RESULT(r21) + mtspr SPRG2,r22 /* r1 is now kernel sp */ +#if 0 + addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */ + cmplw 0,r1,r2 + cmplw 1,r1,r24 + crand 1,1,4 + bgt stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */ +#endif + lwz r24,0(r23) /* virtual address of handler */ + lwz r23,4(r23) /* where to go when done */ + mtspr SRR0,r24 + mtspr SRR1,r20 + mtlr r23 + SYNC + rfi /* jump to handler, enable MMU */ + +int_return: + mfmsr r28 /* Disable interrupts */ + li r4,0 + ori r4,r4,MSR_EE + andc r28,r28,r4 + SYNC /* Some chip revs need this... */ + mtmsr r28 + SYNC + lwz r2,_CTR(r1) + lwz r0,_LINK(r1) + mtctr r2 + mtlr r0 + lwz r2,_XER(r1) + lwz r0,_CCR(r1) + mtspr XER,r2 + mtcrf 0xFF,r0 + REST_10GPRS(3, r1) + REST_10GPRS(13, r1) + REST_8GPRS(23, r1) + REST_GPR(31, r1) + lwz r2,_NIP(r1) /* Restore environment */ + lwz r0,_MSR(r1) + mtspr SRR0,r2 + mtspr SRR1,r0 + lwz r0,GPR0(r1) + lwz r2,GPR2(r1) + lwz r1,GPR1(r1) + SYNC + rfi + +crit_return: + mfmsr r28 /* Disable interrupts */ + li r4,0 + ori r4,r4,MSR_EE + andc r28,r28,r4 + SYNC /* Some chip revs need this... */ + mtmsr r28 + SYNC + lwz r2,_CTR(r1) + lwz r0,_LINK(r1) + mtctr r2 + mtlr r0 + lwz r2,_XER(r1) + lwz r0,_CCR(r1) + mtspr XER,r2 + mtcrf 0xFF,r0 + REST_10GPRS(3, r1) + REST_10GPRS(13, r1) + REST_8GPRS(23, r1) + REST_GPR(31, r1) + lwz r2,_NIP(r1) /* Restore environment */ + lwz r0,_MSR(r1) + mtspr 990,r2 /* SRR2 */ + mtspr 991,r0 /* SRR3 */ + lwz r0,GPR0(r1) + lwz r2,GPR2(r1) + lwz r1,GPR1(r1) + SYNC + rfci + +/* Cache functions. +*/ +invalidate_icache: + iccci r0,r0 /* for 405, iccci invalidates the */ + blr /* entire I cache */ + +invalidate_dcache: + addi r6,0,0x0000 /* clear GPR 6 */ + /* Do loop for # of dcache congruence classes. */ + addi r7,r0, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2) + /* NOTE: dccci invalidates both */ + mtctr r7 /* ways in the D cache */ +..dcloop: + dccci 0,r6 /* invalidate line */ + addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */ + bdnz ..dcloop + blr + +flush_dcache: + addis r9,r0,0x0002 /* set mask for EE and CE msr bits */ + ori r9,r9,0x8000 + mfmsr r12 /* save msr */ + andc r9,r12,r9 + mtmsr r9 /* disable EE and CE */ + addi r10,r0,0x0001 /* enable data cache for unused memory */ + mfdccr r9 /* region 0xF8000000-0xFFFFFFFF via */ + or r10,r10,r9 /* bit 31 in dccr */ + mtdccr r10 + + /* do loop for # of congruence classes. */ + addi r10,r0,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2) + addi r11,r0,(CFG_DCACHE_SIZE / 2) /* D cache set size - 2 way sets */ + mtctr r10 + addi r10,r0,(0xE000-0x10000) /* start at 0xFFFFE000 */ + add r11,r10,r11 /* add to get to other side of cache line */ +..flush_dcache_loop: + lwz r3,0(r10) /* least recently used side */ + lwz r3,0(r11) /* the other side */ + dccci r0,r11 /* invalidate both sides */ + addi r10,r10,CFG_CACHELINE_SIZE /* bump to next line */ + addi r11,r11,CFG_CACHELINE_SIZE /* bump to next line */ + bdnz ..flush_dcache_loop + sync /* allow memory access to complete */ + mtdccr r9 /* restore dccr */ + mtmsr r12 /* restore msr */ + blr + + .globl icache_enable +icache_enable: + mflr r8 + bl invalidate_icache + mtlr r8 + isync + addis r3,r0, 0x8000 /* set bit 0 */ + mticcr r3 + blr + + .globl icache_disable +icache_disable: + addis r3,r0, 0x0000 /* clear bit 0 */ + mticcr r3 + isync + blr + + .globl icache_status +icache_status: + mficcr r3 + srwi r3, r3, 31 /* >>31 => select bit 0 */ + blr + + .globl dcache_enable +dcache_enable: + mflr r8 + bl invalidate_dcache + mtlr r8 + isync + addis r3,r0, 0x8000 /* set bit 0 */ + mtdccr r3 + blr + + .globl dcache_disable +dcache_disable: + mflr r8 + bl flush_dcache + mtlr r8 + addis r3,r0, 0x0000 /* clear bit 0 */ + mtdccr r3 + blr + + .globl dcache_status +dcache_status: + mfdccr r3 + srwi r3, r3, 31 /* >>31 => select bit 0 */ + blr + + .globl get_pvr +get_pvr: + mfspr r3, PVR + blr + +#if !defined(CONFIG_440) + .globl wr_pit +wr_pit: + mtspr pit, r3 + blr +#endif + + .globl wr_tcr +wr_tcr: + mtspr tcr, r3 + blr + +/*------------------------------------------------------------------------------- */ +/* Function: in8 */ +/* Description: Input 8 bits */ +/*------------------------------------------------------------------------------- */ + .globl in8 +in8: + lbz r3,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out8 */ +/* Description: Output 8 bits */ +/*------------------------------------------------------------------------------- */ + .globl out8 +out8: + stb r4,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out16 */ +/* Description: Output 16 bits */ +/*------------------------------------------------------------------------------- */ + .globl out16 +out16: + sth r4,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out16r */ +/* Description: Byte reverse and output 16 bits */ +/*------------------------------------------------------------------------------- */ + .globl out16r +out16r: + sthbrx r4,r0,r3 + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out32 */ +/* Description: Output 32 bits */ +/*------------------------------------------------------------------------------- */ + .globl out32 +out32: + stw r4,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out32r */ +/* Description: Byte reverse and output 32 bits */ +/*------------------------------------------------------------------------------- */ + .globl out32r +out32r: + stwbrx r4,r0,r3 + blr + +/*------------------------------------------------------------------------------- */ +/* Function: in16 */ +/* Description: Input 16 bits */ +/*------------------------------------------------------------------------------- */ + .globl in16 +in16: + lhz r3,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: in16r */ +/* Description: Input 16 bits and byte reverse */ +/*------------------------------------------------------------------------------- */ + .globl in16r +in16r: + lhbrx r3,r0,r3 + blr + +/*------------------------------------------------------------------------------- */ +/* Function: in32 */ +/* Description: Input 32 bits */ +/*------------------------------------------------------------------------------- */ + .globl in32 +in32: + lwz 3,0x0000(3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: in32r */ +/* Description: Input 32 bits and byte reverse */ +/*------------------------------------------------------------------------------- */ + .globl in32r +in32r: + lwbrx r3,r0,r3 + blr + +/*------------------------------------------------------------------------------- */ +/* Function: ppcDcbf */ +/* Description: Data Cache block flush */ +/* Input: r3 = effective address */ +/* Output: none. */ +/*------------------------------------------------------------------------------- */ + .globl ppcDcbf +ppcDcbf: + dcbf r0,r3 + blr + +/*------------------------------------------------------------------------------- */ +/* Function: ppcDcbi */ +/* Description: Data Cache block Invalidate */ +/* Input: r3 = effective address */ +/* Output: none. */ +/*------------------------------------------------------------------------------- */ + .globl ppcDcbi +ppcDcbi: + dcbi r0,r3 + blr + +/*------------------------------------------------------------------------------- */ +/* Function: ppcSync */ +/* Description: Processor Synchronize */ +/* Input: none. */ +/* Output: none. */ +/*------------------------------------------------------------------------------- */ + .globl ppcSync +ppcSync: + sync + blr + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r3 = dest + * r4 = src + * r5 = length in bytes + * r6 = cachelinesize + */ + .globl relocate_code +relocate_code: + mr r1, r3 /* Set new stack pointer */ + mr r9, r4 /* Save copy of Init Data pointer */ + mr r10, r5 /* Save copy of Destination Address */ + + mr r3, r5 /* Destination Address */ + lis r4, CFG_MONITOR_BASE@h /* Source Address */ + ori r4, r4, CFG_MONITOR_BASE@l + lis r5, CFG_MONITOR_LEN@h /* Length in Bytes */ + ori r5, r5, CFG_MONITOR_LEN@l + li r6, CFG_CACHELINE_SIZE /* Cache Line Size */ + + /* + * Fix GOT pointer: + * + * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address + * + * Offset: + */ + sub r15, r10, r4 + + /* First our own GOT */ + add r14, r14, r15 + /* the the one used by the C code */ + add r30, r30, r15 + + /* + * Now relocate code + */ + + cmplw cr1,r3,r4 + addi r0,r5,3 + srwi. r0,r0,2 + beq cr1,4f /* In place copy is not necessary */ + beq 7f /* Protect against 0 count */ + mtctr r0 + bge cr1,2f + + la r8,-4(r4) + la r7,-4(r3) +1: lwzu r0,4(r8) + stwu r0,4(r7) + bdnz 1b + b 4f + +2: slwi r0,r0,2 + add r8,r4,r0 + add r7,r3,r0 +3: lwzu r0,-4(r8) + stwu r0,-4(r7) + bdnz 3b + +/* + * Now flush the cache: note that we must start from a cache aligned + * address. Otherwise we might miss one cache line. + */ +4: cmpwi r6,0 + add r5,r3,r5 + beq 7f /* Always flush prefetch queue in any case */ + subi r0,r6,1 + andc r3,r3,r0 + mr r4,r3 +5: dcbst 0,r4 + add r4,r4,r6 + cmplw r4,r5 + blt 5b + sync /* Wait for all dcbst to complete on bus */ + mr r4,r3 +6: icbi 0,r4 + add r4,r4,r6 + cmplw r4,r5 + blt 6b +7: sync /* Wait for all icbi to complete on bus */ + isync + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ + + addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET + mtlr r0 + blr /* NEVER RETURNS! */ + +in_ram: + + /* + * Relocation Function, r14 point to got2+0x8000 + * + * Adjust got2 pointers, no need to check for 0, this code + * already puts a few entries in the table. + */ + li r0,__got2_entries@sectoff@l + la r3,GOT(_GOT2_TABLE_) + lwz r11,GOT(_GOT2_TABLE_) + mtctr r0 + sub r11,r3,r11 + addi r3,r3,-4 +1: lwzu r0,4(r3) + add r0,r0,r11 + stw r0,0(r3) + bdnz 1b + + /* + * Now adjust the fixups and the pointers to the fixups + * in case we need to move ourselves again. + */ +2: li r0,__fixup_entries@sectoff@l + lwz r3,GOT(_FIXUP_TABLE_) + cmpwi r0,0 + mtctr r0 + addi r3,r3,-4 + beq 4f +3: lwzu r4,4(r3) + lwzux r0,r4,r11 + add r0,r0,r11 + stw r10,0(r3) + stw r0,0(r4) + bdnz 3b +4: +clear_bss: + /* + * Now clear BSS segment + */ + lwz r3,GOT(.bss) + lwz r4,GOT(_end) + + cmplw 0, r3, r4 + beq 6f + + li r0, 0 +5: + stw r0, 0(r3) + addi r3, r3, 4 + cmplw 0, r3, r4 + bne 5b +6: + + mr r3, r9 /* Init Data pointer */ + mr r4, r10 /* Destination Address */ + bl board_init_r + + /* Problems accessing "end" in C, so do it here */ + .globl get_endaddr +get_endaddr: + lwz r3,GOT(_end) + blr + + /* + * Copy exception vector code to low memory + * + * r3: dest_addr + * r7: source address, r8: end address, r9: target address + */ + .globl trap_init +trap_init: + lwz r7, GOT(_start) + lwz r8, GOT(_end_of_vectors) + + rlwinm r9, r7, 0, 18, 31 /* _start & 0x3FFF */ + + cmplw 0, r7, r8 + bgelr /* return if r7>=r8 - just in case */ + + mflr r4 /* save link register */ +1: + lwz r0, 0(r7) + stw r0, 0(r9) + addi r7, r7, 4 + addi r9, r9, 4 + cmplw 0, r7, r8 + bne 1b + + /* + * relocate `hdlr' and `int_return' entries + */ + li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET + li r8, Alignment - _start + EXC_OFF_SYS_RESET +2: + bl trap_reloc + addi r7, r7, 0x100 /* next exception vector */ + cmplw 0, r7, r8 + blt 2b + + li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET + bl trap_reloc + + li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET + bl trap_reloc + + li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET + li r8, SystemCall - _start + EXC_OFF_SYS_RESET +3: + bl trap_reloc + addi r7, r7, 0x100 /* next exception vector */ + cmplw 0, r7, r8 + blt 3b + + li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET + li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET +4: + bl trap_reloc + addi r7, r7, 0x100 /* next exception vector */ + cmplw 0, r7, r8 + blt 4b + + mtlr r4 /* restore link register */ + blr + + /* + * Function: relocate entries for one exception vector + */ +trap_reloc: + lwz r0, 0(r7) /* hdlr ... */ + add r0, r0, r3 /* ... += dest_addr */ + stw r0, 0(r7) + + lwz r0, 4(r7) /* int_return ... */ + add r0, r0, r3 /* ... += dest_addr */ + stw r0, 4(r7) + + blr diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h new file mode 100644 index 0000000000..2975fa395f --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -0,0 +1,1133 @@ +/* + * linux/include/asm-arm/arch-pxa/pxa-regs.h + * + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +/* FIXME hack so that SA-1111.h will work [cb] */ + +#ifndef __ASSEMBLY__ +typedef unsigned short Word16 ; +typedef unsigned int Word32 ; +typedef Word32 Word ; +typedef Word Quad [4] ; +typedef void *Address ; +typedef void (*ExcpHndlr) (void) ; +#endif + +#ifndef __ASSEMBLY__ +#define io_p2v(PhAdd) (PhAdd) +#define __REG(x) (*((volatile u32 *)io_p2v(x))) +#else +#define __REG(x) (x) +#endif + +/* + * PXA Chip selects + */ + +#define PXA_CS0_PHYS 0x00000000 +#define PXA_CS1_PHYS 0x04000000 +#define PXA_CS2_PHYS 0x08000000 +#define PXA_CS3_PHYS 0x0C000000 +#define PXA_CS4_PHYS 0x10000000 +#define PXA_CS5_PHYS 0x14000000 + + +/* + * Personal Computer Memory Card International Association (PCMCIA) sockets + */ + +#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ +#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ +#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ +#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ +#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ + +#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ +#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ +#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ +#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ + +#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ +#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ +#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ +#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ + +#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ + (0x20000000 + (Nb)*PCMCIASp) +#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ +#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ + (_PCMCIA (Nb) + 2*PCMCIAPrtSp) +#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ + (_PCMCIA (Nb) + 3*PCMCIAPrtSp) + +#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ +#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ +#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ +#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ + +#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ +#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ +#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ +#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ + + + +/* + * DMA Controller + */ + +#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ +#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ +#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ +#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */ +#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */ +#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */ +#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */ +#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */ +#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */ +#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */ +#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */ +#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */ +#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */ +#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ +#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ +#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ + +#define DCSR(x) __REG2(0x40000000, (x) << 2) + +#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ +#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ +#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ +#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ +#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ +#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ +#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ +#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ + +#define DINT __REG(0x400000f0) /* DMA Interrupt Register */ + +#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ +#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ +#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ +#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */ +#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */ +#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */ +#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */ +#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */ +#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */ +#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */ +#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */ +#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */ +#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */ +#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */ +#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */ +#define DRCMR15 __REG(0x4000013c) /* Reserved */ +#define DRCMR16 __REG(0x40000140) /* Reserved */ +#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */ +#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ +#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ +#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ +#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ +#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ +#define DRCMR23 __REG(0x4000015c) /* Reserved */ +#define DRCMR24 __REG(0x40000160) /* Reserved */ +#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ +#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ +#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ +#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ +#define DRCMR29 __REG(0x40000174) /* Reserved */ +#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ +#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ +#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ +#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ +#define DRCMR34 __REG(0x40000188) /* Reserved */ +#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ +#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ +#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ +#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ +#define DRCMR39 __REG(0x4000019C) /* Reserved */ + +#define DRCMRRXSADR DRCMR2 +#define DRCMRTXSADR DRCMR3 +#define DRCMRRXBTRBR DRCMR4 +#define DRCMRTXBTTHR DRCMR5 +#define DRCMRRXFFRBR DRCMR6 +#define DRCMRTXFFTHR DRCMR7 +#define DRCMRRXMCDR DRCMR8 +#define DRCMRRXMODR DRCMR9 +#define DRCMRTXMODR DRCMR10 +#define DRCMRRXPCDR DRCMR11 +#define DRCMRTXPCDR DRCMR12 +#define DRCMRRXSSDR DRCMR13 +#define DRCMRTXSSDR DRCMR14 +#define DRCMRRXICDR DRCMR17 +#define DRCMRTXICDR DRCMR18 +#define DRCMRRXSTRBR DRCMR19 +#define DRCMRTXSTTHR DRCMR20 +#define DRCMRRXMMC DRCMR21 +#define DRCMRTXMMC DRCMR22 + +#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ +#define DRCMR_CHLNUM 0x0f /* mask for Channel Number (read / write) */ + +#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ +#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ +#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */ +#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */ +#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */ +#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */ +#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */ +#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */ +#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */ +#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */ +#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */ +#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */ +#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */ +#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */ +#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */ +#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */ +#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */ +#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */ +#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */ +#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */ +#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */ +#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */ +#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */ +#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */ +#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */ +#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */ +#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */ +#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */ +#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */ +#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */ +#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */ +#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */ +#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */ +#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */ +#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */ +#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */ +#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */ +#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */ +#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */ +#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */ +#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */ +#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */ +#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */ +#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */ +#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */ +#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */ +#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */ +#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */ +#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */ +#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */ +#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */ +#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */ +#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */ +#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */ +#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */ +#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */ +#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */ +#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */ +#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */ +#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */ +#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */ +#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */ +#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */ +#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */ + +#define DDADR(x) __REG2(0x40000200, (x) << 4) +#define DSADR(x) __REG2(0x40000204, (x) << 4) +#define DTADR(x) __REG2(0x40000208, (x) << 4) +#define DCMD(x) __REG2(0x4000020c, (x) << 4) + +#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ +#define DDADR_STOP (1 << 0) /* Stop (read / write) */ + +#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ +#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ +#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ +#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ +#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ +#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ +#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ +#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ +#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ +#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ +#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ +#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ +#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ + +/* default combinations */ +#define DCMD_RXPCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) +#define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) +#define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4) + + +/* + * UARTs + */ + +/* Full Function UART (FFUART) */ +#define FFUART FFRBR +#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ +#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ +#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ +#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ +#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ +#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ +#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ +#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ +#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ +#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ +#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ +#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +/* Bluetooth UART (BTUART) */ +#define BTUART BTRBR +#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ +#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ +#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ +#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ +#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ +#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ +#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ +#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ +#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ +#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ +#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ +#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +/* Standard UART (STUART) */ +#define STUART STRBR +#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ +#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ +#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ +#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ +#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ +#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ +#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ +#define STLSR __REG(0x40700014) /* Line Status Register (read only) */ +#define STMSR __REG(0x40700018) /* Reserved */ +#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ +#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ +#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +#define IER_DMAE (1 << 7) /* DMA Requests Enable */ +#define IER_UUE (1 << 6) /* UART Unit Enable */ +#define IER_NRZE (1 << 5) /* NRZ coding Enable */ +#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ +#define IER_MIE (1 << 3) /* Modem Interrupt Enable */ +#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ +#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ +#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ + +#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ +#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ +#define IIR_TOD (1 << 3) /* Time Out Detected */ +#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ +#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ +#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ + +#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ +#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ +#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ +#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ +#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ +#define FCR_ITL_1 (0) +#define FCR_ITL_8 (FCR_ITL1) +#define FCR_ITL_16 (FCR_ITL2) +#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) + +#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ +#define LCR_SB (1 << 6) /* Set Break */ +#define LCR_STKYP (1 << 5) /* Sticky Parity */ +#define LCR_EPS (1 << 4) /* Even Parity Select */ +#define LCR_PEN (1 << 3) /* Parity Enable */ +#define LCR_STB (1 << 2) /* Stop Bit */ +#define LCR_WLS1 (1 << 1) /* Word Length Select */ +#define LCR_WLS0 (1 << 0) /* Word Length Select */ + +#define LSR_FIFOE (1 << 7) /* FIFO Error Status */ +#define LSR_TEMT (1 << 6) /* Transmitter Empty */ +#define LSR_TDRQ (1 << 5) /* Transmit Data Request */ +#define LSR_BI (1 << 4) /* Break Interrupt */ +#define LSR_FE (1 << 3) /* Framing Error */ +#define LSR_PE (1 << 2) /* Parity Error */ +#define LSR_OE (1 << 1) /* Overrun Error */ +#define LSR_DR (1 << 0) /* Data Ready */ + +#define MCR_LOOP (1 << 4) */ +#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ +#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ +#define MCR_RTS (1 << 1) /* Request to Send */ +#define MCR_DTR (1 << 0) /* Data Terminal Ready */ + +#define MSR_DCD (1 << 7) /* Data Carrier Detect */ +#define MSR_RI (1 << 6) /* Ring Indicator */ +#define MSR_DSR (1 << 5) /* Data Set Ready */ +#define MSR_CTS (1 << 4) /* Clear To Send */ +#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ +#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ +#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ +#define MSR_DCTS (1 << 0) /* Delta Clear To Send */ + +/* + * IrSR (Infrared Selection Register) + */ +#define IrSR_OFFSET 0x20 + +#define IrSR_RXPL_NEG_IS_ZERO (1<<4) +#define IrSR_RXPL_POS_IS_ZERO 0x0 +#define IrSR_TXPL_NEG_IS_ZERO (1<<3) +#define IrSR_TXPL_POS_IS_ZERO 0x0 +#define IrSR_XMODE_PULSE_1_6 (1<<2) +#define IrSR_XMODE_PULSE_3_16 0x0 +#define IrSR_RCVEIR_IR_MODE (1<<1) +#define IrSR_RCVEIR_UART_MODE 0x0 +#define IrSR_XMITIR_IR_MODE (1<<0) +#define IrSR_XMITIR_UART_MODE 0x0 + +#define IrSR_IR_RECEIVE_ON (\ + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_IR_MODE | \ + IrSR_XMITIR_UART_MODE) + +#define IrSR_IR_TRANSMIT_ON (\ + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_UART_MODE | \ + IrSR_XMITIR_IR_MODE) + + +/* + * I2C registers + */ + +#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ +#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ +#define ICR __REG(0x40301690) /* I2C Control Register - ICR */ +#define ISR __REG(0x40301698) /* I2C Status Register - ISR */ +#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ + + +/* + * Serial Audio Controller + */ + + +/* FIXME the audio defines collide w/ the SA1111 defines. I don't like these + * short defines because there is too much chance of namespace collision */ + +/*#define SACR0 __REG(0x40400000) / Global Control Register */ +/*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */ +/*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ +/*#define SAIMR __REG(0x40400014) / Serial Audio Interrupt Mask Register */ +/*#define SAICR __REG(0x40400018) / Serial Audio Interrupt Clear Register */ +/*#define SADIV __REG(0x40400060) / Audio Clock Divider Register. */ +/*#define SADR __REG(0x40400080) / Serial Audio Data Register (TX and RX FIFO access Register). */ + + +/* + * AC97 Controller registers + */ + +#define POCR __REG(0x40500000) /* PCM Out Control Register */ +#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ + +#define PICR __REG(0x40500004) /* PCM In Control Register */ +#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ + +#define MCCR __REG(0x40500008) /* Mic In Control Register */ +#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ + +#define GCR __REG(0x4050000C) /* Global Control Register */ +#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ +#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ +#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ +#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ +#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ +#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ +#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ +#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ +#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ +#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ + +#define POSR __REG(0x40500010) /* PCM Out Status Register */ +#define POSR_FIFOE (1 << 4) /* FIFO error */ + +#define PISR __REG(0x40500014) /* PCM In Status Register */ +#define PISR_FIFOE (1 << 4) /* FIFO error */ + +#define MCSR __REG(0x40500018) /* Mic In Status Register */ +#define MCSR_FIFOE (1 << 4) /* FIFO error */ + +#define GSR __REG(0x4050001C) /* Global Status Register */ +#define GSR_CDONE (1 << 19) /* Command Done */ +#define GSR_SDONE (1 << 18) /* Status Done */ +#define GSR_RDCS (1 << 15) /* Read Completion Status */ +#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ +#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ +#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ +#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ +#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ +#define GSR_SCR (1 << 9) /* Secondary Codec Ready */ +#define GSR_PCR (1 << 8) /* Primary Codec Ready */ +#define GSR_MINT (1 << 7) /* Mic In Interrupt */ +#define GSR_POINT (1 << 6) /* PCM Out Interrupt */ +#define GSR_PIINT (1 << 5) /* PCM In Interrupt */ +#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ +#define GSR_MIINT (1 << 1) /* Modem In Interrupt */ +#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ + +#define CAR __REG(0x40500020) /* CODEC Access Register */ +#define CAR_CAIP (1 << 0) /* Codec Access In Progress */ + +#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ +#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ + +#define MOCR __REG(0x40500100) /* Modem Out Control Register */ +#define MOCR_FEIE (1 << 3) /* FIFO Error */ + +#define MICR __REG(0x40500108) /* Modem In Control Register */ +#define MICR_FEIE (1 << 3) /* FIFO Error */ + +#define MOSR __REG(0x40500110) /* Modem Out Status Register */ +#define MOSR_FIFOE (1 << 4) /* FIFO error */ + +#define MISR __REG(0x40500118) /* Modem In Status Register */ +#define MISR_FIFOE (1 << 4) /* FIFO error */ + +#define MODR __REG(0x40500140) /* Modem FIFO Data Register */ + +#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ +#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ +#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ +#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ + + +/* + * USB Device Controller + */ + +#define UDCCR __REG(0x40600000) /* UDC Control Register */ +#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ +#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ +#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ +#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ +#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ +#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ +#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ +#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ +#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ +#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ +#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ +#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ +#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ +#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ +#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ +#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ +#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ +#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ +#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ +#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ +#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ +#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ +#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ +#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ +#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ +#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ +#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ +#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ +#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ +#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ +#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ +#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ +#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ +#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ +#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ +#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ +#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ +#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ +#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ +#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ +#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ +#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ +#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ +#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ + + +/* + * Fast Infrared Communication Port + */ + +#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ +#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ +#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ +#define ICDR __REG(0x4080000c) /* ICP Data Register */ +#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ +#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ + + +/* + * Real Time Clock + */ + +#define RCNR __REG(0x40900000) /* RTC Count Register */ +#define RTAR __REG(0x40900004) /* RTC Alarm Register */ +#define RTSR __REG(0x40900008) /* RTC Status Register */ +#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ + +#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ +#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ +#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ +#define RTSR_AL (1 << 0) /* RTC alarm detected */ + + +/* + * OS Timer & Match Registers + */ + +#define OSMR0 __REG(0x40A00000) /* */ +#define OSMR1 __REG(0x40A00004) /* */ +#define OSMR2 __REG(0x40A00008) /* */ +#define OSMR3 __REG(0x40A0000C) /* */ +#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ +#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ +#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ +#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ + +#define OSSR_M3 (1 << 3) /* Match status channel 3 */ +#define OSSR_M2 (1 << 2) /* Match status channel 2 */ +#define OSSR_M1 (1 << 1) /* Match status channel 1 */ +#define OSSR_M0 (1 << 0) /* Match status channel 0 */ + +#define OWER_WME (1 << 0) /* Watchdog Match Enable */ + +#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ +#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ +#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ +#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ + + +/* + * Pulse Width Modulator + */ + +#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ +#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ +#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ + +#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */ +#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ +#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ + + +/* + * Interrupt Controller + */ + +#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ +#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ +#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ +#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ +#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ +#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ + + +/* + * General Purpose I/O + */ + +#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ +#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ +#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ + +#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ +#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ +#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ + +#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ +#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ +#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ + +#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ +#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ +#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ + +#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ +#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ +#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ + +#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ +#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ +#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ + +#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ +#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ +#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ + +#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ +#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ +#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ +#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ +#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ +#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO 80 */ + +/* More handy macros. The argument is a literal GPIO number. */ + +#define GPIO_bit(x) (1 << ((x) & 0x1f)) +#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) +#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) +#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) +#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) +#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) +#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) +#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) +#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) + +/* GPIO alternate function assignments */ + +#define GPIO1_RST 1 /* reset */ +#define GPIO6_MMCCLK 6 /* MMC Clock */ +#define GPIO8_48MHz 7 /* 48 MHz clock output */ +#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ +#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ +#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ +#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ +#define GPIO12_32KHz 12 /* 32 kHz out */ +#define GPIO13_MBGNT 13 /* memory controller grant */ +#define GPIO14_MBREQ 14 /* alternate bus master request */ +#define GPIO15_nCS_1 15 /* chip select 1 */ +#define GPIO16_PWM0 16 /* PWM0 output */ +#define GPIO17_PWM1 17 /* PWM1 output */ +#define GPIO18_RDY 18 /* Ext. Bus Ready */ +#define GPIO19_DREQ1 19 /* External DMA Request */ +#define GPIO20_DREQ0 20 /* External DMA Request */ +#define GPIO23_SCLK 23 /* SSP clock */ +#define GPIO24_SFRM 24 /* SSP Frame */ +#define GPIO25_STXD 25 /* SSP transmit */ +#define GPIO26_SRXD 26 /* SSP receive */ +#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ +#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ +#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ +#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ +#define GPIO31_SYNC 31 /* AC97/I2S sync */ +#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ +#define GPIO33_nCS_5 33 /* chip select 5 */ +#define GPIO34_FFRXD 34 /* FFUART receive */ +#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ +#define GPIO35_FFCTS 35 /* FFUART Clear to send */ +#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ +#define GPIO37_FFDSR 37 /* FFUART data set ready */ +#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ +#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ +#define GPIO39_FFTXD 39 /* FFUART transmit data */ +#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ +#define GPIO41_FFRTS 41 /* FFUART request to send */ +#define GPIO42_BTRXD 42 /* BTUART receive data */ +#define GPIO43_BTTXD 43 /* BTUART transmit data */ +#define GPIO44_BTCTS 44 /* BTUART clear to send */ +#define GPIO45_BTRTS 45 /* BTUART request to send */ +#define GPIO46_ICPRXD 46 /* ICP receive data */ +#define GPIO46_STRXD 46 /* STD_UART receive data */ +#define GPIO47_ICPTXD 47 /* ICP transmit data */ +#define GPIO47_STTXD 47 /* STD_UART transmit data */ +#define GPIO48_nPOE 48 /* Output Enable for Card Space */ +#define GPIO49_nPWE 49 /* Write Enable for Card Space */ +#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ +#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ +#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ +#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ +#define GPIO53_MMCCLK 53 /* MMC Clock */ +#define GPIO54_MMCCLK 54 /* MMC Clock */ +#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ +#define GPIO55_nPREG 55 /* Card Address bit 26 */ +#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ +#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ +#define GPIO58_LDD_0 58 /* LCD data pin 0 */ +#define GPIO59_LDD_1 59 /* LCD data pin 1 */ +#define GPIO60_LDD_2 60 /* LCD data pin 2 */ +#define GPIO61_LDD_3 61 /* LCD data pin 3 */ +#define GPIO62_LDD_4 62 /* LCD data pin 4 */ +#define GPIO63_LDD_5 63 /* LCD data pin 5 */ +#define GPIO64_LDD_6 64 /* LCD data pin 6 */ +#define GPIO65_LDD_7 65 /* LCD data pin 7 */ +#define GPIO66_LDD_8 66 /* LCD data pin 8 */ +#define GPIO66_MBREQ 66 /* alternate bus master req */ +#define GPIO67_LDD_9 67 /* LCD data pin 9 */ +#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ +#define GPIO68_LDD_10 68 /* LCD data pin 10 */ +#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ +#define GPIO69_LDD_11 69 /* LCD data pin 11 */ +#define GPIO69_MMCCLK 69 /* MMC_CLK */ +#define GPIO70_LDD_12 70 /* LCD data pin 12 */ +#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ +#define GPIO71_LDD_13 71 /* LCD data pin 13 */ +#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ +#define GPIO72_LDD_14 72 /* LCD data pin 14 */ +#define GPIO72_32kHz 72 /* 32 kHz clock */ +#define GPIO73_LDD_15 73 /* LCD data pin 15 */ +#define GPIO73_MBGNT 73 /* Memory controller grant */ +#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ +#define GPIO75_LCD_LCLK 75 /* LCD line clock */ +#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ +#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ +#define GPIO78_nCS_2 78 /* chip select 2 */ +#define GPIO79_nCS_3 79 /* chip select 3 */ +#define GPIO80_nCS_4 80 /* chip select 4 */ + +/* GPIO alternate function mode & direction */ + +#define GPIO_IN 0x000 +#define GPIO_OUT 0x080 +#define GPIO_ALT_FN_1_IN 0x100 +#define GPIO_ALT_FN_1_OUT 0x180 +#define GPIO_ALT_FN_2_IN 0x200 +#define GPIO_ALT_FN_2_OUT 0x280 +#define GPIO_ALT_FN_3_IN 0x300 +#define GPIO_ALT_FN_3_OUT 0x380 +#define GPIO_MD_MASK_NR 0x07f +#define GPIO_MD_MASK_DIR 0x080 +#define GPIO_MD_MASK_FN 0x300 + +#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) +#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) +#define GPIO8_48MHz_MD ( 8 | GPIO_ALT_FN_1_OUT) +#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) +#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) +#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) +#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) +#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) +#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) +#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) +#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) +#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) +#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) +#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) +#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) +#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) +#define GPIO23_SCLK_md (23 | GPIO_ALT_FN_2_OUT) +#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) +#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) +#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) +#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) +#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) +#define GPIO28_BITCLK_I2S_MD (28 | GPIO_ALT_FN_2_IN) +#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) +#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) +#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) +#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) +#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) +#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) +#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) +#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) +#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) +#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) +#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) +#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) +#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) +#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) +#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) +#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) +#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) +#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) +#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) +#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) +#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) +#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) +#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) +#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) +#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) +#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) +#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) +#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) +#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) +#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) +#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) +#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) +#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) +#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) +#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) +#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) +#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) +#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) +#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) +#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) +#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) +#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) +#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) +#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) +#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) +#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) +#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) +#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) +#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) +#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) +#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) +#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) +#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) +#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) +#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) +#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) +#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) +#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) +#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) +#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) +#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) +#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) +#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) +#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) +#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) +#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) +#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) + + +/* + * Power Manager + */ + +#define PMCR __REG(0x40F00000) /* Power Manager Control Register */ +#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ +#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ +#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */ +#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */ +#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ +#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ +#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ +#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ +#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ +#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ +#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ + + +/* + * SSP Serial Port Registers + */ + +#define SSCR0 __REG(0x41000000) /* SSP Control Register 0 */ +#define SSCR1 __REG(0x41000004) /* SSP Control Register 1 */ +#define SSSR __REG(0x41000008) /* SSP Status Register */ +#define SSITR __REG(0x4100000C) /* SSP Interrupt Test Register */ +#define SSDR __REG(0x41000010) /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ + + +/* + * MultiMediaCard (MMC) controller + */ + +#define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */ +#define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */ +#define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */ +#define MMC_SPI __REG(0x4110000c) /* SPI mode control bits */ +#define MMC_CMDAT __REG(0x41100010) /* Command/response/data sequence control */ +#define MMC_RESTO __REG(0x41100014) /* Expected response time out */ +#define MMC_RDTO __REG(0x41100018) /* Expected data read time out */ +#define MMC_BLKLEN __REG(0x4110001c) /* Block length of data transaction */ +#define MMC_NOB __REG(0x41100020) /* Number of blocks, for block mode */ +#define MMC_PRTBUF __REG(0x41100024) /* Partial MMC_TXFIFO FIFO written */ +#define MMC_I_MASK __REG(0x41100028) /* Interrupt Mask */ +#define MMC_I_REG __REG(0x4110002c) /* Interrupt Register (read only) */ +#define MMC_CMD __REG(0x41100030) /* Index of current command */ +#define MMC_ARGH __REG(0x41100034) /* MSW part of the current command argument */ +#define MMC_ARGL __REG(0x41100038) /* LSW part of the current command argument */ +#define MMC_RES __REG(0x4110003c) /* Response FIFO (read only) */ +#define MMC_RXFIFO __REG(0x41100040) /* Receive FIFO (read only) */ +#define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */ + + +/* + * Core Clock + */ + +#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ +#define CKEN __REG(0x41300004) /* Clock Enable Register */ +#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ + +#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ +#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ + +#define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */ +#define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */ +#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */ +#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */ +#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */ +#define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */ +#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ +#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ +#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */ +#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */ +#define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */ +#define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */ +#define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */ + +#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ +#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ + +#define CCCR_L09 (0x1F) +#define CCCR_L27 (0x1) +#define CCCR_L32 (0x2) +#define CCCR_L36 (0x3) +#define CCCR_L40 (0x4) +#define CCCR_L45 (0x5) + +#define CCCR_M1 (0x1 << 5) +#define CCCR_M2 (0x2 << 5) +#define CCCR_M4 (0x3 << 5) + +#define CCCR_N10 (0x2 << 7) +#define CCCR_N15 (0x3 << 7) +#define CCCR_N20 (0x4 << 7) +#define CCCR_N25 (0x5 << 7) +#define CCCR_N30 (0x6 << 7) + +/* + * LCD + */ + +#define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */ +#define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */ +#define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */ +#define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */ +#define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ +#define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ +#define LCSR __REG(0x44000038) /* LCD Controller Status Register */ +#define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ +#define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ +#define TMEDCR __REG(0x44000044) /* TMED Control Register */ + +#define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */ +#define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */ +#define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */ +#define LDCMD0 __REG(0x4400020C) /* DMA Channel 0 Command Register */ +#define FDADR1 __REG(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */ +#define FSADR1 __REG(0x44000214) /* DMA Channel 1 Frame Source Address Register */ +#define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */ +#define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */ + +#define LCCR0_ENB (1 << 0) /* LCD Controller enable */ +#define LCCR0_CMS (1 << 1) /* Color = 0, Monochrome = 1 */ +#define LCCR0_SDS (1 << 2) /* Single Panel = 0, Dual Panel = 1 */ +#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ +#define LCCR0_SFM (1 << 4) /* Start of frame mask */ +#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ +#define LCCR0_EFM (1 << 6) /* End of Frame mask */ +#define LCCR0_PAS (1 << 7) /* Passive = 0, Active = 1 */ +#define LCCR0_BLE (1 << 8) /* Little Endian = 0, Big Endian = 1 */ +#define LCCR0_DPD (1 << 9) /* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */ +#define LCCR0_DIS (1 << 10) /* LCD Disable */ +#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ +#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ +#define LCCR0_PDD_S 12 +#define LCCR0_BM (1 << 20) /* Branch mask */ +#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ + +#define LCCR3_PCD (0xff) /* Pixel clock divisor */ +#define LCCR3_ACB (0xff << 8) /* AC Bias pin frequency */ +#define LCCR3_ACB_S 8 +#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ +#define LCCR3_API_S 16 +#define LCCR3_VSP (1 << 20) /* vertical sync polarity */ +#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ +#define LCCR3_PCP (1 << 22) /* pixel clock polarity */ +#define LCCR3_OEP (1 << 23) /* output enable polarity */ +#define LCCR3_BPP (7 << 24) /* bits per pixel */ +#define LCCR3_BPP_S 24 +#define LCCR3_DPC (1 << 27) /* double pixel clock mode */ + +#define LCSR_LDD (1 << 0) /* LCD Disable Done */ +#define LCSR_SOF (1 << 1) /* Start of frame */ +#define LCSR_BER (1 << 2) /* Bus error */ +#define LCSR_ABC (1 << 3) /* AC Bias count */ +#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ +#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ +#define LCSR_OU (1 << 6) /* output FIFO underrun */ +#define LCSR_QD (1 << 7) /* quick disable */ +#define LCSR_EOF (1 << 8) /* end of frame */ +#define LCSR_BS (1 << 9) /* branch status */ +#define LCSR_SINT (1 << 10) /* subsequent interrupt */ + +#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ + +/* + * Memory controller + */ + +#define MEMC_BASE __REG(0x48000000) /* Base of Memoriy Controller */ +#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ +#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ +#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ +#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ +#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ +#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ +#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ +#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ +#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ +#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ +#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ +#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ +#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ +#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ +#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ +#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ +#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ + +#define MDCNFG_DE0 0x00000001 +#define MDCNFG_DE1 0x00000002 +#define MDCNFG_DE2 0x00010000 +#define MDCNFG_DE3 0x00020000 +#define MDCNFG_DWID0 0x00000004 + +#define MDREFR_E0PIN 0x00001000 +#define MDREFR_K0RUN 0x00002000 +#define MDREFR_K0DB2 0x00004000 +#define MDREFR_E1PIN 0x00008000 +#define MDREFR_K1RUN 0x00010000 +#define MDREFR_K1DB2 0x00020000 +#define MDREFR_K2RUN 0x00040000 +#define MDREFR_K2DB2 0x00080000 +#define MDREFR_APD 0x00100000 +#define MDREFR_SLFRSH 0x00400000 +#define MDREFR_K0FREE 0x00800000 +#define MDREFR_K1FREE 0x01000000 +#define MDREFR_K2FREE 0x02000000 + +#define MDCNFG_OFFSET 0x0 +#define MDREFR_OFFSET 0x4 +#define MSC0_OFFSET 0x8 +#define MSC1_OFFSET 0xC +#define MSC2_OFFSET 0x10 +#define MECR_OFFSET 0x14 +#define SXLCR_OFFSET 0x18 +#define SXCNFG_OFFSET 0x1C +#define FLYCNFG_OFFSET 0x20 +#define SXMRS_OFFSET 0x24 +#define MCMEM0_OFFSET 0x28 +#define MCMEM1_OFFSET 0x2C +#define MCATT0_OFFSET 0x30 +#define MCATT1_OFFSET 0x34 +#define MCIO0_OFFSET 0x38 +#define MCIO1_OFFSET 0x3C +#define MDMRS_OFFSET 0x40 + + + + diff --git a/include/asm-arm/arch-xscale/pxa-regs.h b/include/asm-arm/arch-xscale/pxa-regs.h new file mode 100644 index 0000000000..2975fa395f --- /dev/null +++ b/include/asm-arm/arch-xscale/pxa-regs.h @@ -0,0 +1,1133 @@ +/* + * linux/include/asm-arm/arch-pxa/pxa-regs.h + * + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +/* FIXME hack so that SA-1111.h will work [cb] */ + +#ifndef __ASSEMBLY__ +typedef unsigned short Word16 ; +typedef unsigned int Word32 ; +typedef Word32 Word ; +typedef Word Quad [4] ; +typedef void *Address ; +typedef void (*ExcpHndlr) (void) ; +#endif + +#ifndef __ASSEMBLY__ +#define io_p2v(PhAdd) (PhAdd) +#define __REG(x) (*((volatile u32 *)io_p2v(x))) +#else +#define __REG(x) (x) +#endif + +/* + * PXA Chip selects + */ + +#define PXA_CS0_PHYS 0x00000000 +#define PXA_CS1_PHYS 0x04000000 +#define PXA_CS2_PHYS 0x08000000 +#define PXA_CS3_PHYS 0x0C000000 +#define PXA_CS4_PHYS 0x10000000 +#define PXA_CS5_PHYS 0x14000000 + + +/* + * Personal Computer Memory Card International Association (PCMCIA) sockets + */ + +#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ +#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ +#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ +#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ +#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ + +#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ +#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ +#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ +#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ + +#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ +#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ +#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ +#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ + +#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ + (0x20000000 + (Nb)*PCMCIASp) +#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ +#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ + (_PCMCIA (Nb) + 2*PCMCIAPrtSp) +#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ + (_PCMCIA (Nb) + 3*PCMCIAPrtSp) + +#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ +#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ +#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ +#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ + +#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ +#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ +#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ +#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ + + + +/* + * DMA Controller + */ + +#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ +#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ +#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ +#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */ +#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */ +#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */ +#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */ +#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */ +#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */ +#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */ +#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */ +#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */ +#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */ +#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ +#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ +#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ + +#define DCSR(x) __REG2(0x40000000, (x) << 2) + +#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ +#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ +#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ +#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ +#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ +#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ +#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ +#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ + +#define DINT __REG(0x400000f0) /* DMA Interrupt Register */ + +#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ +#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ +#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ +#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */ +#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */ +#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */ +#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */ +#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */ +#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */ +#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */ +#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */ +#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */ +#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */ +#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */ +#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */ +#define DRCMR15 __REG(0x4000013c) /* Reserved */ +#define DRCMR16 __REG(0x40000140) /* Reserved */ +#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */ +#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ +#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ +#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ +#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ +#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ +#define DRCMR23 __REG(0x4000015c) /* Reserved */ +#define DRCMR24 __REG(0x40000160) /* Reserved */ +#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ +#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ +#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ +#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ +#define DRCMR29 __REG(0x40000174) /* Reserved */ +#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ +#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ +#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ +#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ +#define DRCMR34 __REG(0x40000188) /* Reserved */ +#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ +#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ +#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ +#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ +#define DRCMR39 __REG(0x4000019C) /* Reserved */ + +#define DRCMRRXSADR DRCMR2 +#define DRCMRTXSADR DRCMR3 +#define DRCMRRXBTRBR DRCMR4 +#define DRCMRTXBTTHR DRCMR5 +#define DRCMRRXFFRBR DRCMR6 +#define DRCMRTXFFTHR DRCMR7 +#define DRCMRRXMCDR DRCMR8 +#define DRCMRRXMODR DRCMR9 +#define DRCMRTXMODR DRCMR10 +#define DRCMRRXPCDR DRCMR11 +#define DRCMRTXPCDR DRCMR12 +#define DRCMRRXSSDR DRCMR13 +#define DRCMRTXSSDR DRCMR14 +#define DRCMRRXICDR DRCMR17 +#define DRCMRTXICDR DRCMR18 +#define DRCMRRXSTRBR DRCMR19 +#define DRCMRTXSTTHR DRCMR20 +#define DRCMRRXMMC DRCMR21 +#define DRCMRTXMMC DRCMR22 + +#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ +#define DRCMR_CHLNUM 0x0f /* mask for Channel Number (read / write) */ + +#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ +#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ +#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */ +#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */ +#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */ +#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */ +#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */ +#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */ +#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */ +#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */ +#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */ +#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */ +#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */ +#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */ +#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */ +#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */ +#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */ +#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */ +#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */ +#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */ +#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */ +#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */ +#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */ +#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */ +#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */ +#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */ +#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */ +#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */ +#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */ +#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */ +#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */ +#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */ +#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */ +#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */ +#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */ +#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */ +#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */ +#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */ +#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */ +#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */ +#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */ +#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */ +#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */ +#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */ +#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */ +#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */ +#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */ +#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */ +#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */ +#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */ +#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */ +#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */ +#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */ +#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */ +#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */ +#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */ +#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */ +#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */ +#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */ +#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */ +#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */ +#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */ +#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */ +#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */ + +#define DDADR(x) __REG2(0x40000200, (x) << 4) +#define DSADR(x) __REG2(0x40000204, (x) << 4) +#define DTADR(x) __REG2(0x40000208, (x) << 4) +#define DCMD(x) __REG2(0x4000020c, (x) << 4) + +#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ +#define DDADR_STOP (1 << 0) /* Stop (read / write) */ + +#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ +#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ +#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ +#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ +#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ +#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ +#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ +#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ +#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ +#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ +#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ +#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ +#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ + +/* default combinations */ +#define DCMD_RXPCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) +#define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) +#define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4) + + +/* + * UARTs + */ + +/* Full Function UART (FFUART) */ +#define FFUART FFRBR +#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ +#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ +#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ +#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ +#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ +#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ +#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ +#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ +#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ +#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ +#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ +#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +/* Bluetooth UART (BTUART) */ +#define BTUART BTRBR +#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ +#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ +#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ +#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ +#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ +#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ +#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ +#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ +#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ +#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ +#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ +#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +/* Standard UART (STUART) */ +#define STUART STRBR +#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ +#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ +#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ +#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ +#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ +#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ +#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ +#define STLSR __REG(0x40700014) /* Line Status Register (read only) */ +#define STMSR __REG(0x40700018) /* Reserved */ +#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ +#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ +#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +#define IER_DMAE (1 << 7) /* DMA Requests Enable */ +#define IER_UUE (1 << 6) /* UART Unit Enable */ +#define IER_NRZE (1 << 5) /* NRZ coding Enable */ +#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ +#define IER_MIE (1 << 3) /* Modem Interrupt Enable */ +#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ +#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ +#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ + +#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ +#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ +#define IIR_TOD (1 << 3) /* Time Out Detected */ +#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ +#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ +#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ + +#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ +#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ +#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ +#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ +#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ +#define FCR_ITL_1 (0) +#define FCR_ITL_8 (FCR_ITL1) +#define FCR_ITL_16 (FCR_ITL2) +#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) + +#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ +#define LCR_SB (1 << 6) /* Set Break */ +#define LCR_STKYP (1 << 5) /* Sticky Parity */ +#define LCR_EPS (1 << 4) /* Even Parity Select */ +#define LCR_PEN (1 << 3) /* Parity Enable */ +#define LCR_STB (1 << 2) /* Stop Bit */ +#define LCR_WLS1 (1 << 1) /* Word Length Select */ +#define LCR_WLS0 (1 << 0) /* Word Length Select */ + +#define LSR_FIFOE (1 << 7) /* FIFO Error Status */ +#define LSR_TEMT (1 << 6) /* Transmitter Empty */ +#define LSR_TDRQ (1 << 5) /* Transmit Data Request */ +#define LSR_BI (1 << 4) /* Break Interrupt */ +#define LSR_FE (1 << 3) /* Framing Error */ +#define LSR_PE (1 << 2) /* Parity Error */ +#define LSR_OE (1 << 1) /* Overrun Error */ +#define LSR_DR (1 << 0) /* Data Ready */ + +#define MCR_LOOP (1 << 4) */ +#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ +#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ +#define MCR_RTS (1 << 1) /* Request to Send */ +#define MCR_DTR (1 << 0) /* Data Terminal Ready */ + +#define MSR_DCD (1 << 7) /* Data Carrier Detect */ +#define MSR_RI (1 << 6) /* Ring Indicator */ +#define MSR_DSR (1 << 5) /* Data Set Ready */ +#define MSR_CTS (1 << 4) /* Clear To Send */ +#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ +#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ +#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ +#define MSR_DCTS (1 << 0) /* Delta Clear To Send */ + +/* + * IrSR (Infrared Selection Register) + */ +#define IrSR_OFFSET 0x20 + +#define IrSR_RXPL_NEG_IS_ZERO (1<<4) +#define IrSR_RXPL_POS_IS_ZERO 0x0 +#define IrSR_TXPL_NEG_IS_ZERO (1<<3) +#define IrSR_TXPL_POS_IS_ZERO 0x0 +#define IrSR_XMODE_PULSE_1_6 (1<<2) +#define IrSR_XMODE_PULSE_3_16 0x0 +#define IrSR_RCVEIR_IR_MODE (1<<1) +#define IrSR_RCVEIR_UART_MODE 0x0 +#define IrSR_XMITIR_IR_MODE (1<<0) +#define IrSR_XMITIR_UART_MODE 0x0 + +#define IrSR_IR_RECEIVE_ON (\ + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_IR_MODE | \ + IrSR_XMITIR_UART_MODE) + +#define IrSR_IR_TRANSMIT_ON (\ + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_UART_MODE | \ + IrSR_XMITIR_IR_MODE) + + +/* + * I2C registers + */ + +#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ +#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ +#define ICR __REG(0x40301690) /* I2C Control Register - ICR */ +#define ISR __REG(0x40301698) /* I2C Status Register - ISR */ +#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ + + +/* + * Serial Audio Controller + */ + + +/* FIXME the audio defines collide w/ the SA1111 defines. I don't like these + * short defines because there is too much chance of namespace collision */ + +/*#define SACR0 __REG(0x40400000) / Global Control Register */ +/*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */ +/*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ +/*#define SAIMR __REG(0x40400014) / Serial Audio Interrupt Mask Register */ +/*#define SAICR __REG(0x40400018) / Serial Audio Interrupt Clear Register */ +/*#define SADIV __REG(0x40400060) / Audio Clock Divider Register. */ +/*#define SADR __REG(0x40400080) / Serial Audio Data Register (TX and RX FIFO access Register). */ + + +/* + * AC97 Controller registers + */ + +#define POCR __REG(0x40500000) /* PCM Out Control Register */ +#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ + +#define PICR __REG(0x40500004) /* PCM In Control Register */ +#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ + +#define MCCR __REG(0x40500008) /* Mic In Control Register */ +#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ + +#define GCR __REG(0x4050000C) /* Global Control Register */ +#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ +#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ +#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ +#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ +#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ +#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ +#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ +#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ +#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ +#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ + +#define POSR __REG(0x40500010) /* PCM Out Status Register */ +#define POSR_FIFOE (1 << 4) /* FIFO error */ + +#define PISR __REG(0x40500014) /* PCM In Status Register */ +#define PISR_FIFOE (1 << 4) /* FIFO error */ + +#define MCSR __REG(0x40500018) /* Mic In Status Register */ +#define MCSR_FIFOE (1 << 4) /* FIFO error */ + +#define GSR __REG(0x4050001C) /* Global Status Register */ +#define GSR_CDONE (1 << 19) /* Command Done */ +#define GSR_SDONE (1 << 18) /* Status Done */ +#define GSR_RDCS (1 << 15) /* Read Completion Status */ +#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ +#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ +#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ +#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ +#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ +#define GSR_SCR (1 << 9) /* Secondary Codec Ready */ +#define GSR_PCR (1 << 8) /* Primary Codec Ready */ +#define GSR_MINT (1 << 7) /* Mic In Interrupt */ +#define GSR_POINT (1 << 6) /* PCM Out Interrupt */ +#define GSR_PIINT (1 << 5) /* PCM In Interrupt */ +#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ +#define GSR_MIINT (1 << 1) /* Modem In Interrupt */ +#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ + +#define CAR __REG(0x40500020) /* CODEC Access Register */ +#define CAR_CAIP (1 << 0) /* Codec Access In Progress */ + +#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ +#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ + +#define MOCR __REG(0x40500100) /* Modem Out Control Register */ +#define MOCR_FEIE (1 << 3) /* FIFO Error */ + +#define MICR __REG(0x40500108) /* Modem In Control Register */ +#define MICR_FEIE (1 << 3) /* FIFO Error */ + +#define MOSR __REG(0x40500110) /* Modem Out Status Register */ +#define MOSR_FIFOE (1 << 4) /* FIFO error */ + +#define MISR __REG(0x40500118) /* Modem In Status Register */ +#define MISR_FIFOE (1 << 4) /* FIFO error */ + +#define MODR __REG(0x40500140) /* Modem FIFO Data Register */ + +#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ +#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ +#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ +#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ + + +/* + * USB Device Controller + */ + +#define UDCCR __REG(0x40600000) /* UDC Control Register */ +#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ +#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ +#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ +#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ +#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ +#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ +#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ +#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ +#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ +#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ +#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ +#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ +#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ +#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ +#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ +#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ +#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ +#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ +#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ +#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ +#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ +#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ +#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ +#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ +#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ +#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ +#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ +#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ +#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ +#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ +#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ +#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ +#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ +#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ +#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ +#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ +#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ +#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ +#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ +#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ +#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ +#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ +#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ +#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ + + +/* + * Fast Infrared Communication Port + */ + +#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ +#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ +#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ +#define ICDR __REG(0x4080000c) /* ICP Data Register */ +#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ +#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ + + +/* + * Real Time Clock + */ + +#define RCNR __REG(0x40900000) /* RTC Count Register */ +#define RTAR __REG(0x40900004) /* RTC Alarm Register */ +#define RTSR __REG(0x40900008) /* RTC Status Register */ +#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ + +#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ +#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ +#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ +#define RTSR_AL (1 << 0) /* RTC alarm detected */ + + +/* + * OS Timer & Match Registers + */ + +#define OSMR0 __REG(0x40A00000) /* */ +#define OSMR1 __REG(0x40A00004) /* */ +#define OSMR2 __REG(0x40A00008) /* */ +#define OSMR3 __REG(0x40A0000C) /* */ +#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ +#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ +#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ +#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ + +#define OSSR_M3 (1 << 3) /* Match status channel 3 */ +#define OSSR_M2 (1 << 2) /* Match status channel 2 */ +#define OSSR_M1 (1 << 1) /* Match status channel 1 */ +#define OSSR_M0 (1 << 0) /* Match status channel 0 */ + +#define OWER_WME (1 << 0) /* Watchdog Match Enable */ + +#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ +#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ +#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ +#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ + + +/* + * Pulse Width Modulator + */ + +#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ +#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ +#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ + +#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */ +#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ +#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ + + +/* + * Interrupt Controller + */ + +#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ +#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ +#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ +#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ +#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ +#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ + + +/* + * General Purpose I/O + */ + +#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ +#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ +#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ + +#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ +#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ +#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ + +#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ +#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ +#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ + +#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ +#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ +#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ + +#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ +#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ +#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ + +#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ +#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ +#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ + +#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ +#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ +#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ + +#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ +#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ +#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ +#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ +#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ +#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO 80 */ + +/* More handy macros. The argument is a literal GPIO number. */ + +#define GPIO_bit(x) (1 << ((x) & 0x1f)) +#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) +#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) +#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) +#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) +#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) +#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) +#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) +#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) + +/* GPIO alternate function assignments */ + +#define GPIO1_RST 1 /* reset */ +#define GPIO6_MMCCLK 6 /* MMC Clock */ +#define GPIO8_48MHz 7 /* 48 MHz clock output */ +#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ +#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ +#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ +#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ +#define GPIO12_32KHz 12 /* 32 kHz out */ +#define GPIO13_MBGNT 13 /* memory controller grant */ +#define GPIO14_MBREQ 14 /* alternate bus master request */ +#define GPIO15_nCS_1 15 /* chip select 1 */ +#define GPIO16_PWM0 16 /* PWM0 output */ +#define GPIO17_PWM1 17 /* PWM1 output */ +#define GPIO18_RDY 18 /* Ext. Bus Ready */ +#define GPIO19_DREQ1 19 /* External DMA Request */ +#define GPIO20_DREQ0 20 /* External DMA Request */ +#define GPIO23_SCLK 23 /* SSP clock */ +#define GPIO24_SFRM 24 /* SSP Frame */ +#define GPIO25_STXD 25 /* SSP transmit */ +#define GPIO26_SRXD 26 /* SSP receive */ +#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ +#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ +#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ +#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ +#define GPIO31_SYNC 31 /* AC97/I2S sync */ +#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ +#define GPIO33_nCS_5 33 /* chip select 5 */ +#define GPIO34_FFRXD 34 /* FFUART receive */ +#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ +#define GPIO35_FFCTS 35 /* FFUART Clear to send */ +#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ +#define GPIO37_FFDSR 37 /* FFUART data set ready */ +#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ +#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ +#define GPIO39_FFTXD 39 /* FFUART transmit data */ +#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ +#define GPIO41_FFRTS 41 /* FFUART request to send */ +#define GPIO42_BTRXD 42 /* BTUART receive data */ +#define GPIO43_BTTXD 43 /* BTUART transmit data */ +#define GPIO44_BTCTS 44 /* BTUART clear to send */ +#define GPIO45_BTRTS 45 /* BTUART request to send */ +#define GPIO46_ICPRXD 46 /* ICP receive data */ +#define GPIO46_STRXD 46 /* STD_UART receive data */ +#define GPIO47_ICPTXD 47 /* ICP transmit data */ +#define GPIO47_STTXD 47 /* STD_UART transmit data */ +#define GPIO48_nPOE 48 /* Output Enable for Card Space */ +#define GPIO49_nPWE 49 /* Write Enable for Card Space */ +#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ +#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ +#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ +#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ +#define GPIO53_MMCCLK 53 /* MMC Clock */ +#define GPIO54_MMCCLK 54 /* MMC Clock */ +#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ +#define GPIO55_nPREG 55 /* Card Address bit 26 */ +#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ +#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ +#define GPIO58_LDD_0 58 /* LCD data pin 0 */ +#define GPIO59_LDD_1 59 /* LCD data pin 1 */ +#define GPIO60_LDD_2 60 /* LCD data pin 2 */ +#define GPIO61_LDD_3 61 /* LCD data pin 3 */ +#define GPIO62_LDD_4 62 /* LCD data pin 4 */ +#define GPIO63_LDD_5 63 /* LCD data pin 5 */ +#define GPIO64_LDD_6 64 /* LCD data pin 6 */ +#define GPIO65_LDD_7 65 /* LCD data pin 7 */ +#define GPIO66_LDD_8 66 /* LCD data pin 8 */ +#define GPIO66_MBREQ 66 /* alternate bus master req */ +#define GPIO67_LDD_9 67 /* LCD data pin 9 */ +#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ +#define GPIO68_LDD_10 68 /* LCD data pin 10 */ +#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ +#define GPIO69_LDD_11 69 /* LCD data pin 11 */ +#define GPIO69_MMCCLK 69 /* MMC_CLK */ +#define GPIO70_LDD_12 70 /* LCD data pin 12 */ +#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ +#define GPIO71_LDD_13 71 /* LCD data pin 13 */ +#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ +#define GPIO72_LDD_14 72 /* LCD data pin 14 */ +#define GPIO72_32kHz 72 /* 32 kHz clock */ +#define GPIO73_LDD_15 73 /* LCD data pin 15 */ +#define GPIO73_MBGNT 73 /* Memory controller grant */ +#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ +#define GPIO75_LCD_LCLK 75 /* LCD line clock */ +#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ +#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ +#define GPIO78_nCS_2 78 /* chip select 2 */ +#define GPIO79_nCS_3 79 /* chip select 3 */ +#define GPIO80_nCS_4 80 /* chip select 4 */ + +/* GPIO alternate function mode & direction */ + +#define GPIO_IN 0x000 +#define GPIO_OUT 0x080 +#define GPIO_ALT_FN_1_IN 0x100 +#define GPIO_ALT_FN_1_OUT 0x180 +#define GPIO_ALT_FN_2_IN 0x200 +#define GPIO_ALT_FN_2_OUT 0x280 +#define GPIO_ALT_FN_3_IN 0x300 +#define GPIO_ALT_FN_3_OUT 0x380 +#define GPIO_MD_MASK_NR 0x07f +#define GPIO_MD_MASK_DIR 0x080 +#define GPIO_MD_MASK_FN 0x300 + +#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) +#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) +#define GPIO8_48MHz_MD ( 8 | GPIO_ALT_FN_1_OUT) +#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) +#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) +#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) +#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) +#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) +#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) +#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) +#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) +#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) +#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) +#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) +#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) +#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) +#define GPIO23_SCLK_md (23 | GPIO_ALT_FN_2_OUT) +#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) +#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) +#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) +#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) +#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) +#define GPIO28_BITCLK_I2S_MD (28 | GPIO_ALT_FN_2_IN) +#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) +#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) +#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) +#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) +#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) +#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) +#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) +#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) +#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) +#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) +#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) +#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) +#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) +#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) +#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) +#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) +#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) +#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) +#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) +#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) +#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) +#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) +#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) +#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) +#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) +#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) +#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) +#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) +#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) +#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) +#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) +#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) +#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) +#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) +#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) +#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) +#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) +#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) +#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) +#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) +#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) +#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) +#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) +#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) +#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) +#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) +#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) +#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) +#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) +#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) +#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) +#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) +#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) +#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) +#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) +#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) +#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) +#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) +#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) +#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) +#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) +#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) +#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) +#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) +#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) +#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) +#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) + + +/* + * Power Manager + */ + +#define PMCR __REG(0x40F00000) /* Power Manager Control Register */ +#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ +#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ +#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */ +#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */ +#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ +#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ +#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ +#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ +#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ +#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ +#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ + + +/* + * SSP Serial Port Registers + */ + +#define SSCR0 __REG(0x41000000) /* SSP Control Register 0 */ +#define SSCR1 __REG(0x41000004) /* SSP Control Register 1 */ +#define SSSR __REG(0x41000008) /* SSP Status Register */ +#define SSITR __REG(0x4100000C) /* SSP Interrupt Test Register */ +#define SSDR __REG(0x41000010) /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ + + +/* + * MultiMediaCard (MMC) controller + */ + +#define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */ +#define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */ +#define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */ +#define MMC_SPI __REG(0x4110000c) /* SPI mode control bits */ +#define MMC_CMDAT __REG(0x41100010) /* Command/response/data sequence control */ +#define MMC_RESTO __REG(0x41100014) /* Expected response time out */ +#define MMC_RDTO __REG(0x41100018) /* Expected data read time out */ +#define MMC_BLKLEN __REG(0x4110001c) /* Block length of data transaction */ +#define MMC_NOB __REG(0x41100020) /* Number of blocks, for block mode */ +#define MMC_PRTBUF __REG(0x41100024) /* Partial MMC_TXFIFO FIFO written */ +#define MMC_I_MASK __REG(0x41100028) /* Interrupt Mask */ +#define MMC_I_REG __REG(0x4110002c) /* Interrupt Register (read only) */ +#define MMC_CMD __REG(0x41100030) /* Index of current command */ +#define MMC_ARGH __REG(0x41100034) /* MSW part of the current command argument */ +#define MMC_ARGL __REG(0x41100038) /* LSW part of the current command argument */ +#define MMC_RES __REG(0x4110003c) /* Response FIFO (read only) */ +#define MMC_RXFIFO __REG(0x41100040) /* Receive FIFO (read only) */ +#define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */ + + +/* + * Core Clock + */ + +#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ +#define CKEN __REG(0x41300004) /* Clock Enable Register */ +#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ + +#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ +#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ + +#define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */ +#define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */ +#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */ +#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */ +#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */ +#define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */ +#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ +#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ +#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */ +#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */ +#define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */ +#define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */ +#define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */ + +#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ +#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ + +#define CCCR_L09 (0x1F) +#define CCCR_L27 (0x1) +#define CCCR_L32 (0x2) +#define CCCR_L36 (0x3) +#define CCCR_L40 (0x4) +#define CCCR_L45 (0x5) + +#define CCCR_M1 (0x1 << 5) +#define CCCR_M2 (0x2 << 5) +#define CCCR_M4 (0x3 << 5) + +#define CCCR_N10 (0x2 << 7) +#define CCCR_N15 (0x3 << 7) +#define CCCR_N20 (0x4 << 7) +#define CCCR_N25 (0x5 << 7) +#define CCCR_N30 (0x6 << 7) + +/* + * LCD + */ + +#define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */ +#define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */ +#define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */ +#define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */ +#define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ +#define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ +#define LCSR __REG(0x44000038) /* LCD Controller Status Register */ +#define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ +#define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ +#define TMEDCR __REG(0x44000044) /* TMED Control Register */ + +#define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */ +#define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */ +#define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */ +#define LDCMD0 __REG(0x4400020C) /* DMA Channel 0 Command Register */ +#define FDADR1 __REG(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */ +#define FSADR1 __REG(0x44000214) /* DMA Channel 1 Frame Source Address Register */ +#define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */ +#define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */ + +#define LCCR0_ENB (1 << 0) /* LCD Controller enable */ +#define LCCR0_CMS (1 << 1) /* Color = 0, Monochrome = 1 */ +#define LCCR0_SDS (1 << 2) /* Single Panel = 0, Dual Panel = 1 */ +#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ +#define LCCR0_SFM (1 << 4) /* Start of frame mask */ +#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ +#define LCCR0_EFM (1 << 6) /* End of Frame mask */ +#define LCCR0_PAS (1 << 7) /* Passive = 0, Active = 1 */ +#define LCCR0_BLE (1 << 8) /* Little Endian = 0, Big Endian = 1 */ +#define LCCR0_DPD (1 << 9) /* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */ +#define LCCR0_DIS (1 << 10) /* LCD Disable */ +#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ +#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ +#define LCCR0_PDD_S 12 +#define LCCR0_BM (1 << 20) /* Branch mask */ +#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ + +#define LCCR3_PCD (0xff) /* Pixel clock divisor */ +#define LCCR3_ACB (0xff << 8) /* AC Bias pin frequency */ +#define LCCR3_ACB_S 8 +#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ +#define LCCR3_API_S 16 +#define LCCR3_VSP (1 << 20) /* vertical sync polarity */ +#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ +#define LCCR3_PCP (1 << 22) /* pixel clock polarity */ +#define LCCR3_OEP (1 << 23) /* output enable polarity */ +#define LCCR3_BPP (7 << 24) /* bits per pixel */ +#define LCCR3_BPP_S 24 +#define LCCR3_DPC (1 << 27) /* double pixel clock mode */ + +#define LCSR_LDD (1 << 0) /* LCD Disable Done */ +#define LCSR_SOF (1 << 1) /* Start of frame */ +#define LCSR_BER (1 << 2) /* Bus error */ +#define LCSR_ABC (1 << 3) /* AC Bias count */ +#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ +#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ +#define LCSR_OU (1 << 6) /* output FIFO underrun */ +#define LCSR_QD (1 << 7) /* quick disable */ +#define LCSR_EOF (1 << 8) /* end of frame */ +#define LCSR_BS (1 << 9) /* branch status */ +#define LCSR_SINT (1 << 10) /* subsequent interrupt */ + +#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ + +/* + * Memory controller + */ + +#define MEMC_BASE __REG(0x48000000) /* Base of Memoriy Controller */ +#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ +#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ +#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ +#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ +#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ +#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ +#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ +#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ +#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ +#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ +#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ +#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ +#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ +#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ +#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ +#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ +#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ + +#define MDCNFG_DE0 0x00000001 +#define MDCNFG_DE1 0x00000002 +#define MDCNFG_DE2 0x00010000 +#define MDCNFG_DE3 0x00020000 +#define MDCNFG_DWID0 0x00000004 + +#define MDREFR_E0PIN 0x00001000 +#define MDREFR_K0RUN 0x00002000 +#define MDREFR_K0DB2 0x00004000 +#define MDREFR_E1PIN 0x00008000 +#define MDREFR_K1RUN 0x00010000 +#define MDREFR_K1DB2 0x00020000 +#define MDREFR_K2RUN 0x00040000 +#define MDREFR_K2DB2 0x00080000 +#define MDREFR_APD 0x00100000 +#define MDREFR_SLFRSH 0x00400000 +#define MDREFR_K0FREE 0x00800000 +#define MDREFR_K1FREE 0x01000000 +#define MDREFR_K2FREE 0x02000000 + +#define MDCNFG_OFFSET 0x0 +#define MDREFR_OFFSET 0x4 +#define MSC0_OFFSET 0x8 +#define MSC1_OFFSET 0xC +#define MSC2_OFFSET 0x10 +#define MECR_OFFSET 0x14 +#define SXLCR_OFFSET 0x18 +#define SXCNFG_OFFSET 0x1C +#define FLYCNFG_OFFSET 0x20 +#define SXMRS_OFFSET 0x24 +#define MCMEM0_OFFSET 0x28 +#define MCMEM1_OFFSET 0x2C +#define MCATT0_OFFSET 0x30 +#define MCATT1_OFFSET 0x34 +#define MCIO0_OFFSET 0x38 +#define MCIO1_OFFSET 0x3C +#define MDMRS_OFFSET 0x40 + + + + diff --git a/include/ppc405.h b/include/ppc405.h new file mode 100644 index 0000000000..e09e9f86e6 --- /dev/null +++ b/include/ppc405.h @@ -0,0 +1,400 @@ +/*----------------------------------------------------------------------------+ +| +| This source code has been made available to you by IBM on an AS-IS +| basis. Anyone receiving this source is licensed under IBM +| copyrights to use it in any way he or she deems fit, including +| copying it, modifying it, compiling it, and redistributing it either +| with or without modifications. No license under IBM patents or +| patent applications is to be implied by the copyright license. +| +| Any user of this software should understand that IBM cannot provide +| technical support for this software and will not be responsible for +| any consequences resulting from the use of this software. +| +| Any person who transfers this source code or any derivative work +| must include the IBM copyright notice, this paragraph, and the +| preceding two paragraphs in the transferred software. +| +| COPYRIGHT I B M CORPORATION 1999 +| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M ++----------------------------------------------------------------------------*/ + +#ifndef __PPC405_H__ +#define __PPC405_H__ + +/*--------------------------------------------------------------------- */ +/* Special Purpose Registers */ +/*--------------------------------------------------------------------- */ + #define srr2 0x3de /* save/restore register 2 */ + #define srr3 0x3df /* save/restore register 3 */ + #define dbsr 0x3f0 /* debug status register */ + #define dbcr0 0x3f2 /* debug control register 0 */ + #define dbcr1 0x3bd /* debug control register 1 */ + #define iac1 0x3f4 /* instruction address comparator 1 */ + #define iac2 0x3f5 /* instruction address comparator 2 */ + #define iac3 0x3b4 /* instruction address comparator 3 */ + #define iac4 0x3b5 /* instruction address comparator 4 */ + #define dac1 0x3f6 /* data address comparator 1 */ + #define dac2 0x3f7 /* data address comparator 2 */ + #define dccr 0x3fa /* data cache control register */ + #define iccr 0x3fb /* instruction cache control register */ + #define esr 0x3d4 /* execption syndrome register */ + #define dear 0x3d5 /* data exeption address register */ + #define evpr 0x3d6 /* exeption vector prefix register */ + #define tsr 0x3d8 /* timer status register */ + #define tcr 0x3da /* timer control register */ + #define pit 0x3db /* programmable interval timer */ + #define sgr 0x3b9 /* storage guarded reg */ + #define dcwr 0x3ba /* data cache write-thru reg*/ + #define sler 0x3bb /* storage little-endian reg */ + #define cdbcr 0x3d7 /* cache debug cntrl reg */ + #define icdbdr 0x3d3 /* instr cache dbug data reg*/ + #define ccr0 0x3b3 /* core configuration register */ + #define dvc1 0x3b6 /* data value compare register 1 */ + #define dvc2 0x3b7 /* data value compare register 2 */ + #define pid 0x3b1 /* process ID */ + #define su0r 0x3bc /* storage user-defined register 0 */ + #define zpr 0x3b0 /* zone protection regsiter */ + + #define tbl 0x11c /* time base lower - privileged write */ + #define tbu 0x11d /* time base upper - privileged write */ + + #define sprg4r 0x104 /* Special purpose general 4 - read only */ + #define sprg5r 0x105 /* Special purpose general 5 - read only */ + #define sprg6r 0x106 /* Special purpose general 6 - read only */ + #define sprg7r 0x107 /* Special purpose general 7 - read only */ + #define sprg4w 0x114 /* Special purpose general 4 - write only */ + #define sprg5w 0x115 /* Special purpose general 5 - write only */ + #define sprg6w 0x116 /* Special purpose general 6 - write only */ + #define sprg7w 0x117 /* Special purpose general 7 - write only */ + +/****************************************************************************** + * Special for PPC405GP + ******************************************************************************/ + +/****************************************************************************** + * DMA + ******************************************************************************/ +#define DMA_DCR_BASE 0x100 +#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */ +#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */ +#define dmada0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */ +#define dmasa0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */ +#define dmasb0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */ +#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */ +#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */ +#define dmada1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */ +#define dmasa1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */ +#define dmasb1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */ +#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */ +#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */ +#define dmada2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */ +#define dmasa2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */ +#define dmasb2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */ +#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */ +#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */ +#define dmada3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */ +#define dmasa3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */ +#define dmasb3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */ +#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */ +#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */ +#define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */ + +/****************************************************************************** + * Universal interrupt controller + ******************************************************************************/ +#define UIC_DCR_BASE 0xc0 +#define uicsr (UIC_DCR_BASE+0x0) /* UIC status */ +#define uicsrs (UIC_DCR_BASE+0x1) /* UIC status set */ +#define uicer (UIC_DCR_BASE+0x2) /* UIC enable */ +#define uiccr (UIC_DCR_BASE+0x3) /* UIC critical */ +#define uicpr (UIC_DCR_BASE+0x4) /* UIC polarity */ +#define uictr (UIC_DCR_BASE+0x5) /* UIC triggering */ +#define uicmsr (UIC_DCR_BASE+0x6) /* UIC masked status */ +#define uicvr (UIC_DCR_BASE+0x7) /* UIC vector */ +#define uicvcr (UIC_DCR_BASE+0x8) /* UIC vector configuration */ + +/*-----------------------------------------------------------------------------+ +| Universal interrupt controller interrupts ++-----------------------------------------------------------------------------*/ +#define UIC_UART0 0x80000000 /* UART 0 */ +#define UIC_UART1 0x40000000 /* UART 1 */ +#define UIC_IIC 0x20000000 /* IIC */ +#define UIC_EXT_MAST 0x10000000 /* External Master */ +#define UIC_PCI 0x08000000 /* PCI write to command reg */ +#define UIC_DMA0 0x04000000 /* DMA chan. 0 */ +#define UIC_DMA1 0x02000000 /* DMA chan. 1 */ +#define UIC_DMA2 0x01000000 /* DMA chan. 2 */ +#define UIC_DMA3 0x00800000 /* DMA chan. 3 */ +#define UIC_EMAC_WAKE 0x00400000 /* EMAC wake up */ +#define UIC_MAL_SERR 0x00200000 /* MAL SERR */ +#define UIC_MAL_TXEOB 0x00100000 /* MAL TXEOB */ +#define UIC_MAL_RXEOB 0x00080000 /* MAL RXEOB */ +#define UIC_MAL_TXDE 0x00040000 /* MAL TXDE */ +#define UIC_MAL_RXDE 0x00020000 /* MAL RXDE */ +#define UIC_ENET 0x00010000 /* Ethernet */ +#define UIC_EXT_PCI_SERR 0x00008000 /* External PCI SERR# */ +#define UIC_ECC_CE 0x00004000 /* ECC Correctable Error */ +#define UIC_PCI_PM 0x00002000 /* PCI Power Management */ +#define UIC_EXT0 0x00000040 /* External interrupt 0 */ +#define UIC_EXT1 0x00000020 /* External interrupt 1 */ +#define UIC_EXT2 0x00000010 /* External interrupt 2 */ +#define UIC_EXT3 0x00000008 /* External interrupt 3 */ +#define UIC_EXT4 0x00000004 /* External interrupt 4 */ +#define UIC_EXT5 0x00000002 /* External interrupt 5 */ +#define UIC_EXT6 0x00000001 /* External interrupt 6 */ + +/****************************************************************************** + * SDRAM Controller + ******************************************************************************/ +#define SDRAM_DCR_BASE 0x10 +#define memcfga (SDRAM_DCR_BASE+0x0) /* Memory configuration address reg */ +#define memcfgd (SDRAM_DCR_BASE+0x1) /* Memory configuration data reg */ + /* values for memcfga register - indirect addressing of these regs */ + #define mem_besra 0x00 /* bus error syndrome reg a */ + #define mem_besrsa 0x04 /* bus error syndrome reg set a */ + #define mem_besrb 0x08 /* bus error syndrome reg b */ + #define mem_besrsb 0x0c /* bus error syndrome reg set b */ + #define mem_bear 0x10 /* bus error address reg */ + #define mem_mcopt1 0x20 /* memory controller options 1 */ + #define mem_rtr 0x30 /* refresh timer reg */ + #define mem_pmit 0x34 /* power management idle timer */ + #define mem_mb0cf 0x40 /* memory bank 0 configuration */ + #define mem_mb1cf 0x44 /* memory bank 1 configuration */ + #define mem_mb2cf 0x48 /* memory bank 2 configuration */ + #define mem_mb3cf 0x4c /* memory bank 3 configuration */ + #define mem_sdtr1 0x80 /* timing reg 1 */ + #define mem_ecccf 0x94 /* ECC configuration */ + #define mem_eccerr 0x98 /* ECC error status */ + +/****************************************************************************** + * Decompression Controller + ******************************************************************************/ +#define DECOMP_DCR_BASE 0x14 +#define kiar (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */ +#define kidr (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */ + /* values for kiar register - indirect addressing of these regs */ + #define kitor0 0x00 /* index table origin register 0 */ + #define kitor1 0x01 /* index table origin register 1 */ + #define kitor2 0x02 /* index table origin register 2 */ + #define kitor3 0x03 /* index table origin register 3 */ + #define kaddr0 0x04 /* address decode definition regsiter 0 */ + #define kaddr1 0x05 /* address decode definition regsiter 1 */ + #define kconf 0x40 /* decompression core config register */ + #define kid 0x41 /* decompression core ID register */ + #define kver 0x42 /* decompression core version # reg */ + #define kpear 0x50 /* bus error addr reg (PLB addr) */ + #define kbear 0x51 /* bus error addr reg (DCP to EBIU addr)*/ + #define kesr0 0x52 /* bus error status reg 0 (R/clear) */ + #define kesr0s 0x53 /* bus error status reg 0 (set) */ + /* There are 0x400 of the following registers, from krom0 to krom3ff*/ + /* Only the first one is given here. */ + #define krom0 0x400 /* SRAM/ROM read/write */ + +/****************************************************************************** + * Power Management + ******************************************************************************/ +#define POWERMAN_DCR_BASE 0xb8 +#define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status */ +#define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable */ +#define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force */ + +/****************************************************************************** + * Extrnal Bus Controller + ******************************************************************************/ +#define EBC_DCR_BASE 0x12 +#define ebccfga (EBC_DCR_BASE+0x0) /* External bus controller addr reg */ +#define ebccfgd (EBC_DCR_BASE+0x1) /* External bus controller data reg */ + /* values for ebccfga register - indirect addressing of these regs */ + #define pb0cr 0x00 /* periph bank 0 config reg */ + #define pb1cr 0x01 /* periph bank 1 config reg */ + #define pb2cr 0x02 /* periph bank 2 config reg */ + #define pb3cr 0x03 /* periph bank 3 config reg */ + #define pb4cr 0x04 /* periph bank 4 config reg */ + #define pb5cr 0x05 /* periph bank 5 config reg */ + #define pb6cr 0x06 /* periph bank 6 config reg */ + #define pb7cr 0x07 /* periph bank 7 config reg */ + #define pb0ap 0x10 /* periph bank 0 access parameters */ + #define pb1ap 0x11 /* periph bank 1 access parameters */ + #define pb2ap 0x12 /* periph bank 2 access parameters */ + #define pb3ap 0x13 /* periph bank 3 access parameters */ + #define pb4ap 0x14 /* periph bank 4 access parameters */ + #define pb5ap 0x15 /* periph bank 5 access parameters */ + #define pb6ap 0x16 /* periph bank 6 access parameters */ + #define pb7ap 0x17 /* periph bank 7 access parameters */ + #define pbear 0x20 /* periph bus error addr reg */ + #define pbesr0 0x21 /* periph bus error status reg 0 */ + #define pbesr1 0x22 /* periph bus error status reg 1 */ + #define epcr 0x23 /* external periph control reg */ + +/****************************************************************************** + * Control + ******************************************************************************/ +#define CNTRL_DCR_BASE 0x0b0 +#define pllmd (CNTRL_DCR_BASE+0x0) /* PLL mode register */ +#define cntrl0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */ +#define cntrl1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */ +#define reset (CNTRL_DCR_BASE+0x3) /* reset register */ +#define strap (CNTRL_DCR_BASE+0x4) /* strap register */ + +/* Bit definitions */ +#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */ +#define PLLMR_FWD_DIV_BYPASS 0xE0000000 +#define PLLMR_FWD_DIV_3 0xA0000000 +#define PLLMR_FWD_DIV_4 0x80000000 +#define PLLMR_FWD_DIV_6 0x40000000 + +#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */ +#define PLLMR_FB_DIV_1 0x02000000 +#define PLLMR_FB_DIV_2 0x04000000 +#define PLLMR_FB_DIV_3 0x06000000 +#define PLLMR_FB_DIV_4 0x08000000 + +#define PLLMR_TUNING_MASK 0x01F80000 + +#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */ +#define PLLMR_CPU_PLB_DIV_1 0x00000000 +#define PLLMR_CPU_PLB_DIV_2 0x00020000 +#define PLLMR_CPU_PLB_DIV_3 0x00040000 +#define PLLMR_CPU_PLB_DIV_4 0x00060000 + +#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */ +#define PLLMR_OPB_PLB_DIV_1 0x00000000 +#define PLLMR_OPB_PLB_DIV_2 0x00008000 +#define PLLMR_OPB_PLB_DIV_3 0x00010000 +#define PLLMR_OPB_PLB_DIV_4 0x00018000 + +#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */ +#define PLLMR_PCI_PLB_DIV_1 0x00000000 +#define PLLMR_PCI_PLB_DIV_2 0x00002000 +#define PLLMR_PCI_PLB_DIV_3 0x00004000 +#define PLLMR_PCI_PLB_DIV_4 0x00006000 + +#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */ +#define PLLMR_EXB_PLB_DIV_2 0x00000000 +#define PLLMR_EXB_PLB_DIV_3 0x00000800 +#define PLLMR_EXB_PLB_DIV_4 0x00001000 +#define PLLMR_EXB_PLB_DIV_5 0x00001800 + +/* definitions for PPC405GPr (new mode strapping) */ +#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */ + +#define PSR_PLL_FWD_MASK 0xC0000000 +#define PSR_PLL_FDBACK_MASK 0x30000000 +#define PSR_PLL_TUNING_MASK 0x0E000000 +#define PSR_PLB_CPU_MASK 0x01800000 +#define PSR_OPB_PLB_MASK 0x00600000 +#define PSR_PCI_PLB_MASK 0x00180000 +#define PSR_EB_PLB_MASK 0x00060000 +#define PSR_ROM_WIDTH_MASK 0x00018000 +#define PSR_ROM_LOC 0x00004000 +#define PSR_PCI_ASYNC_EN 0x00001000 +#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */ +#define PSR_PCI_ARBIT_EN 0x00000400 +#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */ + +/* + * PLL Voltage Controlled Oscillator (VCO) definitions + * Maximum and minimum values (in MHz) for correct PLL operation. + */ +#define VCO_MIN 400 +#define VCO_MAX 800 + +/****************************************************************************** + * Memory Access Layer + ******************************************************************************/ +#define MAL_DCR_BASE 0x180 +#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ +#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */ +#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */ +#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */ +#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */ +#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */ +#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */ +#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */ +#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */ +#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */ +#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */ +#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */ +#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */ +#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */ +#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */ +#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ + +/*----------------------------------------------------------------------------- +| IIC Register Offsets +'----------------------------------------------------------------------------*/ +#define IICMDBUF 0x00 +#define IICSDBUF 0x02 +#define IICLMADR 0x04 +#define IICHMADR 0x05 +#define IICCNTL 0x06 +#define IICMDCNTL 0x07 +#define IICSTS 0x08 +#define IICEXTSTS 0x09 +#define IICLSADR 0x0A +#define IICHSADR 0x0B +#define IICCLKDIV 0x0C +#define IICINTRMSK 0x0D +#define IICXFRCNT 0x0E +#define IICXTCNTLSS 0x0F +#define IICDIRECTCNTL 0x10 + +/*----------------------------------------------------------------------------- +| UART Register Offsets +'----------------------------------------------------------------------------*/ +#define DATA_REG 0x00 +#define DL_LSB 0x00 +#define DL_MSB 0x01 +#define INT_ENABLE 0x01 +#define FIFO_CONTROL 0x02 +#define LINE_CONTROL 0x03 +#define MODEM_CONTROL 0x04 +#define LINE_STATUS 0x05 +#define MODEM_STATUS 0x06 +#define SCRATCH 0x07 + +/****************************************************************************** + * On Chip Memory + ******************************************************************************/ +#define OCM_DCR_BASE 0x018 +#define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */ +#define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */ +#define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */ +#define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */ + + +/* + * Macro for accessing the indirect EBC register + */ +#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data) +#define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd) + + +#ifndef __ASSEMBLY__ + +typedef struct +{ + unsigned long pllFwdDiv; + unsigned long pllFwdDivB; + unsigned long pllFbkDiv; + unsigned long pllPlbDiv; + unsigned long pllPciDiv; + unsigned long pllExtBusDiv; + unsigned long pllOpbDiv; + unsigned long freqVCOMhz; /* in MHz */ + unsigned long freqProcessor; + unsigned long freqPLB; + unsigned long freqPCI; + unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */ + unsigned long pciClkSync; /* PCI clock is synchronous */ +} PPC405_SYS_INFO; + +#endif /* _ASMLANGUAGE */ + +#define RESET_VECTOR 0xfffffffc +#define CACHELINE_MASK (CFG_CACHELINE_SIZE - 1) /* Address mask for cache + line aligned data. */ + +#endif /* __PPC405_H__ */ + -- cgit v1.2.3