summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2015-01-14buildman: Add an option to write the full build outputSimon Glass
Normally buildman runs with 'make -s' meaning that only errors and warnings appear in the log file. Add a -V option to run make in verbose mode, and with V=1, causing a full build log to be created. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14buildman: Add the option to download toolchains from kernel.orgSimon Glass
The site at https://www.kernel.org/pub/tools/crosstool/ is a convenient repository of toolchains which can be used for U-Boot. Add a feature to download and install a toolchain for a selected architecture automatically. It isn't clear how long this site will stay in the current place and format, but we should be able to rely on bug reports if it changes. Suggested-by: Marek Vašut <marex@denx.de> Suggested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14buildman: Allow architecture to alias to multiple toolchainsSimon Glass
Some archs have need than one alias, so support a list of alises in the ..buildman file. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14buildman: Don't use the local settings when running testsSimon Glass
We should create a test setting file when running testes, not use whatever happens to be on the local machine. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14buildman: Don't complain about missing sections in ~/.buildmanSimon Glass
Silently ignore this since it is valid to have missing sections. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14buildman: Add documentation about the .buildman fileSimon Glass
This file is only partially documented. Add some more details. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
2015-01-14buildman: Add a note about Python pre-requisitesSimon Glass
Since we need a few modules which might not be available in a bare-bones distribution, add a note about that to the README. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
2015-01-14buildman: Add an option to use the full tool chain pathSimon Glass
In some cases there may be multiple toolchains with the same name in the path. Provide an option to use the full path in the CROSS_COMPILE environment variable. Note: Wolfgang mentioned that this is dangerous since in some cases there may be other tools on the path that are needed. So this is set up as an option, not the default. I will need test confirmation (i.e. that this commit fixes a real problem) before merging it. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Steve Rae <srae@broadcom.com>
2015-01-14buildman: Put the toolchain path first instead of last in PATHSimon Glass
If: 1. Toolchains A and B have the same filename 2. Toolchain A is in the PATH 3. Toolchain B is given in ~/.buildman and buildman uses it to build then buildman will add toolchain B to the end of its path but will not necessarily use it since U-Boot will find toolchain A first in the PATH. Try to fix this by putting the toolchain first in the path instead of last. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14buildman: Try to avoid hard-coded string parsingSimon Glass
The assumption that the compiler name will always end in gcc is incorrect for clang and apparently on BSD. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14buildman: Allow specifying a range of commits to buildSimon Glass
Adjust the -b flag to permit a range expression as well as a branch. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-14buildman: Don't remove entire output directory when testingSimon Glass
When running tests the output directory is often wiped. This is only safe if a branch is being built. The output directory may contain other things besides the buildman test output. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14buildman: Add an option to flatten output directory treesSimon Glass
When building current source for a single board, buildman puts the output in <output_dir>/current/current/<board>. Add an option to make it use <output_dir>/<board> instead. This removes the unnecessary directories in that case, controlled by the --no-subdirs/-N option. Suggested-by: Tom Rini <trini@ti.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14buildman: Try to guess the upstream commitSimon Glass
Buildman normally obtains the upstream commit by asking git. Provided that the branch was created with 'git checkout -b <branch> <some_upstream>' then this normally works. When there is no upstream, we can try to guess one, by looking up through the commits until we find a branch. Add a function to try this and print a warning if buildman ends up relying on it. Also update the documentation to match. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
2015-01-14buildman: Don't prune output space for 'current source' buildSimon Glass
This is not needed since we always do a full (non-incremental) build. Also it might be dangerous since it will try to delete everything below the base directory. Fix this potentially nasty bug. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14buildman: Put build in 'current', not 'current/current'Simon Glass
Buildman currently puts current-source builds in a current/current subdirectory, but there is no need for the extra depth. Suggested-by: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14buildman: Add tests that check the correct output directory is usedSimon Glass
Add a few tests of the output directory logic. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14Merge branch 'buildman' of git://git.denx.de/u-boot-x86Tom Rini
Conflicts: tools/buildman/control.py Signed-off-by: Tom Rini <trini@ti.com>
2015-01-13x86: Correct ifdtool microcode calculationSimon Glass
This currently assumes that U-Boot resides at the start of ROM. Update it to remove this assumption. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-11tools/kwbimage.c: fix parser error handlingAndreas Bießmann
The two error checks for image_boot_mode_id and image_nand_ecc_mode_id where wrong and would never fail, fix that! This was detected by Apple's clang compiler: ---8<--- HOSTCC tools/kwbimage.o tools/kwbimage.c:553:20: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare] if (el->bootfrom < 0) { ~~~~~~~~~~~~ ^ ~ tools/kwbimage.c:571:23: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare] if (el->nandeccmode < 0) { ~~~~~~~~~~~~~~~ ^ ~ 2 warnings generated. --->8--- Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-By: Jeroen Hofstee <jeroen@myspectrum.nl>
2015-01-10fix: tools: kwbimage.c: Initialize headersz to suppress warningŁukasz Majewski
When building with my toolchain (4.8.2): CROSS_COMPILE=/home/lukma/work/ptxdist/toolchains/arm/OSELAS.Toolchain-2013.12.0/arm-v7a-linux-gnueabi/gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized/bin/arm-v7a-linux-gnueabi- I see following WARNING: tools/kwbimage.c: In function "kwbimage_set_header": tools/kwbimage.c:803:8: warning: "headersz" may be used uninitialized in this function [-Wmaybe-uninitialized] memcpy(ptr, image, headersz); ^ This fix aims to suppress it. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2014-12-29buildman: Fix some typos in READMEDirk Behme
Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-12-18x86: Add a script to process Intel microcode filesSimon Glass
Intel delivers microcode updates in a microcode.dat file which must be split up into individual files for each CPU. Add a tool which performs this task. It can list available microcode updates for each model and produce a new microcode update in U-Boot's .dtsi format. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2014-12-18x86: ifdtool: Add support for early microcode accessSimon Glass
Some Intel CPUs use an 'FSP' binary blob which provides an inflexible means of starting up the CPU. One result is that microcode updates can only be done before RAM is available and therefore parsing of the device tree is impracticle. Worse, the addess of the microcode update must be stored in ROM since a pointer to its start address and size is passed to the 'FSP' blob. It is not possible to perform any calculations to obtain the address and size. To work around this, ifdtool is enhanced to work out the address and size of the first microcode update it finds in the supplied device tree. It then writes these into the correct place in the ROM. U-Boot can then start up the FSP correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-12-18x86: ifdtool: Use a structure for the file/address listSimon Glass
Rather than two independent arrays, use a single array of a suitable structure. Also add a 'type' member since we will shortly add additional types. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-12-18x86: ifdtool: Display filename when file errors are reportedSimon Glass
When a file is missing it helps to know which file. Update the error message to print this information. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-12-18x86: ifdtool: Correct a debug() missing parameterSimon Glass
This is missing a parameter. Fix it to avoid a warning when debug is enabled. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-12-13x86: ifdtool: Separate out filenames for -D and -iSimon Glass
To allow these options to be specified together, separate them out. Change-Id: Ib93f11cd51eb3302127f4c82936ff2b44c88d5a2 Signed-off-by: Simon Glass <sjg@chromium.org>
2014-12-13tools/ifdtool: Support writing multiple files (-w) simultaneouslyBin Meng
Currently ifdtool only supports writing one file (-w) at a time. This looks verbose when generating u-boot.rom for x86 targets. This change allows at most 16 files to be written simultaneously. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-12-11ls102xa: pblimage: Add pblimage tool support for LS102xAAlison Wang
For LS102xA, the size of spl/u-boot-spl.bin is variable. This patch adds the support to deal with the variable u-boot size in pblimage tool. It will be padded to 64 byte boundary. Use pblimage_check_params() to add the specific operations for ARM, such as PBI CRC and END command and the calculation of pbl_cmd_initaddr. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-04Merge branch 'sandbox' of git://git.denx.de/u-boot-x86Tom Rini
2014-11-26buildman: Don't default to -e when building current sourceSimon Glass
We probably don't need to enable this option by default. It is useful to display only failure boards (not errors) and it is easy to add -e if it is required. Also update the docs. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Albert Aribaud <albert.u.boot@aribaud.net>
2014-11-26buildman: Fix repeating board list with -lSimon Glass
Ensure that we don't print duplicate board names when -l is used. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Albert Aribaud <albert.u.boot@aribaud.net>
2014-11-26patman: Use the full commit hash for 'git checkout'Simon Glass
Even with the initial 8 characeters of the hash we will sometimes get a collision. Use the full hash. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-26buildman: Save *.img files tooTom Rini
When saving binary files we likely want to keep any .img files that have been generated as well. Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-11-25tools: Add ifdtool to .gitignoreBin Meng
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-11-24Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2014-11-21x86: ifdtool: Allow creation of an empty ROMSimon Glass
Allow an empty ROM to be created, without needing to provide a descriptor. The descriptor is not needed on some x86 boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21x86: Add ifdtool for working with Intel Flash Descriptor ROM imagesSimon Glass
Newer Intel chips require a Management Engine which requires a particular format for the SPI flash that contains the boot loader. Add a tool that supports creating and modifying these ROM images. This tool is from Chrome OS but has been cleaned up to use U-Boot style and to add comments. A few features have been added also. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-20tools/msximage.c: fix warning about nptr possibly uninitializedAlbert ARIBAUD
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2014-11-20ARM: mxs: tools: Add support for boot progress display flagAlexey Ignatov
mkimage -T mxs now support new flag in config file: DISPLAYPROGRESS - makes boot process print HTLLC characters for each BootROM instruction. Signed-off-by: Alexey Ignatov <lexszero@gmail.com>
2014-11-10Added support for comments in input to mkenvimage.Dominik Muth
This patch adds support for comments in the input to mkenvimage, i.e. in the environment source: All lines starting with a # in the firs column will be ignored. Additionally empty lines will also be ignored. Signed-off-by: Dominik Muth <dominik.muth@bkvibro.com>
2014-11-07tools/env: Fix environment size and CRC on 64-bit hostsDominic Sacré
On architectures where 'long' is 64 bit, the u-boot environment as seen by the fw_env tools was missing 4 bytes. This patch fixes getenvsize(), and thus also ensures that the environment's CRC32 checksum is calculated correctly. Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Tom Rini <trini@ti.com>
2014-11-07kbuild: sync top Makefile with Linux 3.18-rc1Masahiro Yamada
Since Linux 3.15, relative path feature and related fixes, cleanups have been merged to the top Makefile. The relative path feature looks stable enough, so let's import it to U-Boot along with various cleanups. Commits imported from Linux (some need adjustment) are: [1] commit 7e1c04779efd by Michal Marek kbuild: Use relative path for $(objtree) [2] commit 890676c65d69 by Michal Marek kbuild: Use relative path when building in the source tree [3] commit 9da0763bdd82 by Michal Marek kbuild: Use relative path when building in a subdir of the source tree [4] commit c2e28dc975ea by Michal Marek kbuild: Print the name of the build directory [5] commit 066b7ed95580 by Michal Marek kbuild: Do not print the build directory with make -s [6] commit 3f1d9a6cec01 by Michal Marek kbuild: make -s should be used with kernelrelease/kernelversion/image_name [7] commit 7ff525712acf by Masahiro Yamada kbuild: fake the "Entering directory ..." message more simply [8] commit 745a254322c8 by Masahiro Yamada kbuild: use $(Q) for sub-make target [9] commit aa55c8e2f7a3 by Masahiro Yamada kbuild: handle C=... and M=... after entering into build directory [10] commit ab7474ea5361 by Borislav Petkov Kbuild: Ignore GREP_OPTIONS env variable To use relative path feature, tools/Makefile and scripts/Makefile.autoconf must be tweaked. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-05Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2014-11-04ARM: kwimage: fix v0 formatGerald Kerma
This patch fix the kwimage tools for version 0 fileformat used for kirkwood Tested on sheevaplug Signed-off-by: Gerald Kerma <drEagle@doukki.net> Tested-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
2014-11-03patman: Use the full commit hash for 'git checkout'Simon Glass
Even with the initial 8 characeters of the hash we will sometimes get a collision. Use the full hash. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-03buildman: Don't default to -e when using -sSimon Glass
When using summary mode (-s) we don't always want to display errors. Allow this option to be omitted. Series-to: u-boot Series-cc: albert Change-Id: I6b37754d55eb920ecae114fceba55834b43ea3b9 Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Albert Aribaud <albert.u.boot@aribaud.net>
2014-11-03buildman: Fix repeating board list with -lSimon Glass
Ensure that we don't print duplicate board names when -l is used. Change-Id: I56adb138fc18f772ba61eba0fa194cdd7bc7efc6 Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Albert Aribaud <albert.u.boot@aribaud.net>
2014-11-03imximage: Fix the bootdata.size calculationYe.Li
In system boot chapter of i.MX6 reference manual, the "Image Vector Table" figure shows the bootdata.start points to the beginning of the destination memory. It means the bootdata.size should contain the IVT offset part, but the calculation in imximage tool does not have. We found this issue when booting from QuadSPI NOR on i.MX6SX. The u-boot runs into abnormal (crash or stop) after booting. After checked the destination memory where the image is loaded to, there are hundreds of bytes at the image end are not loaded into memory. Since there is a 4096 bytes round in the calculation, for the booting devices using smaller IVT offset, such as SD and SPI booting, they are not easy to reproduce. Signed-off-by: Ye.Li <B37916@freescale.com>