summaryrefslogtreecommitdiff
path: root/board/w7o/fpga.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/w7o/fpga.c')
-rw-r--r--board/w7o/fpga.c173
1 files changed, 86 insertions, 87 deletions
diff --git a/board/w7o/fpga.c b/board/w7o/fpga.c
index e84123b907..97af924294 100644
--- a/board/w7o/fpga.c
+++ b/board/w7o/fpga.c
@@ -36,11 +36,11 @@ fpga_img_write(unsigned long *src, unsigned long len, unsigned short *daddr)
volatile unsigned short *dest = daddr; /* volatile-bypass optimizer */
for (i = 0; i < len; i++, src++) {
- val = *src;
- *dest = (unsigned short)((val & 0xff000000L) >> 16);
- *dest = (unsigned short)((val & 0x00ff0000L) >> 8);
- *dest = (unsigned short)(val & 0x0000ff00L);
- *dest = (unsigned short)((val & 0x000000ffL) << 8);
+ val = *src;
+ *dest = (unsigned short)((val & 0xff000000L) >> 16);
+ *dest = (unsigned short)((val & 0x00ff0000L) >> 8);
+ *dest = (unsigned short)(val & 0x0000ff00L);
+ *dest = (unsigned short)((val & 0x000000ffL) << 8);
}
/* Terminate programming with 4 C clocks */
@@ -88,14 +88,14 @@ fpgaDownload(unsigned char *saddr,
/* Wait for FPGA init line */
while(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */
- /* Check for timeout - 100us max, so use 3ms */
- if (get_timer(start) > 3) {
- printf(" failed to start init.\n");
- log_warn(ERR_XINIT0); /* Don't halt */
-
- /* Reset line stays low */
- goto done; /* I like gotos... */
- }
+ /* Check for timeout - 100us max, so use 3ms */
+ if (get_timer(start) > 3) {
+ printf(" failed to start init.\n");
+ log_warn(ERR_XINIT0); /* Don't halt */
+
+ /* Reset line stays low */
+ goto done; /* I like gotos... */
+ }
}
/* Unreset FPGA */
@@ -105,75 +105,75 @@ fpgaDownload(unsigned char *saddr,
/* Wait for FPGA end of init period . */
while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */
- /* Check for timeout */
- if (get_timer(start) > 3) {
- printf(" failed to exit init.\n");
- log_warn(ERR_XINIT1);
+ /* Check for timeout */
+ if (get_timer(start) > 3) {
+ printf(" failed to exit init.\n");
+ log_warn(ERR_XINIT1);
- /* Reset FPGA */
- grego &= ~GPIO_XCV_PROG; /* PROG line low */
- out32(IBM405GP_GPIO0_OR, grego);
+ /* Reset FPGA */
+ grego &= ~GPIO_XCV_PROG; /* PROG line low */
+ out32(IBM405GP_GPIO0_OR, grego);
- goto done;
- }
+ goto done;
+ }
}
/* Now program FPGA ... */
ndest = dest;
for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
- /* Toggle IRQ/GPIO */
- greg = mfdcr(CPC0_CR0); /* get chip ctrl register */
- greg |= eirq; /* toggle irq/gpio */
- mtdcr(CPC0_CR0, greg); /* ... just do it */
-
- /* turn on open drain for CNFG */
- greg = in32(IBM405GP_GPIO0_ODR); /* get open drain register */
- greg |= cnfg; /* CNFG open drain */
- out32(IBM405GP_GPIO0_ODR, greg); /* .. just do it */
-
- /* Turn output enable on for CNFG */
- greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
- greg |= cnfg; /* CNFG tristate inactive */
- out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
-
- /* Setup FPGA for programming */
- grego &= ~cnfg; /* CONFIG line low */
- out32(IBM405GP_GPIO0_OR, grego);
-
- /*
- * Program the FPGA
- */
- printf("\n destination: 0x%lx ", (unsigned long)ndest);
-
- fpga_img_write(source, length, (unsigned short *)ndest);
-
- /* Done programming */
- grego |= cnfg; /* CONFIG line high */
- out32(IBM405GP_GPIO0_OR, grego);
-
- /* Turn output enable OFF for CNFG */
- greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
- greg &= ~cnfg; /* CNFG tristate inactive */
- out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
-
- /* Toggle IRQ/GPIO */
- greg = mfdcr(CPC0_CR0); /* get chip ctrl register */
- greg &= ~eirq; /* toggle irq/gpio */
- mtdcr(CPC0_CR0, greg); /* ... just do it */
-
- ndest = (unsigned short *)((char *)ndest + 0x00100000L); /* XXX - Next FPGA addr */
- cnfg >>= 1; /* XXX - Next */
- eirq >>= 1;
+ /* Toggle IRQ/GPIO */
+ greg = mfdcr(CPC0_CR0); /* get chip ctrl register */
+ greg |= eirq; /* toggle irq/gpio */
+ mtdcr(CPC0_CR0, greg); /* ... just do it */
+
+ /* turn on open drain for CNFG */
+ greg = in32(IBM405GP_GPIO0_ODR); /* get open drain register */
+ greg |= cnfg; /* CNFG open drain */
+ out32(IBM405GP_GPIO0_ODR, greg); /* .. just do it */
+
+ /* Turn output enable on for CNFG */
+ greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
+ greg |= cnfg; /* CNFG tristate inactive */
+ out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
+
+ /* Setup FPGA for programming */
+ grego &= ~cnfg; /* CONFIG line low */
+ out32(IBM405GP_GPIO0_OR, grego);
+
+ /*
+ * Program the FPGA
+ */
+ printf("\n destination: 0x%lx ", (unsigned long)ndest);
+
+ fpga_img_write(source, length, (unsigned short *)ndest);
+
+ /* Done programming */
+ grego |= cnfg; /* CONFIG line high */
+ out32(IBM405GP_GPIO0_OR, grego);
+
+ /* Turn output enable OFF for CNFG */
+ greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
+ greg &= ~cnfg; /* CNFG tristate inactive */
+ out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
+
+ /* Toggle IRQ/GPIO */
+ greg = mfdcr(CPC0_CR0); /* get chip ctrl register */
+ greg &= ~eirq; /* toggle irq/gpio */
+ mtdcr(CPC0_CR0, greg); /* ... just do it */
+
+ ndest = (unsigned short *)((char *)ndest + 0x00100000L); /* XXX - Next FPGA addr */
+ cnfg >>= 1; /* XXX - Next */
+ eirq >>= 1;
}
/* Terminate programming with 4 C clocks */
ndest = dest;
for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
- val = *ndest;
- val = *ndest;
- val = *ndest;
- val = *ndest;
- ndest = (unsigned short *)((char *)ndest + 0x00100000L);
+ val = *ndest;
+ val = *ndest;
+ val = *ndest;
+ val = *ndest;
+ ndest = (unsigned short *)((char *)ndest + 0x00100000L);
}
/* Setup timer */
@@ -182,17 +182,17 @@ fpgaDownload(unsigned char *saddr,
/* Wait for FPGA end of programming period . */
while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */
- /* Check for timeout */
- if (get_timer(start) > 3) {
- printf(" done failed to come high.\n");
- log_warn(ERR_XDONE1);
+ /* Check for timeout */
+ if (get_timer(start) > 3) {
+ printf(" done failed to come high.\n");
+ log_warn(ERR_XDONE1);
- /* Reset FPGA */
- grego &= ~GPIO_XCV_PROG; /* PROG line low */
- out32(IBM405GP_GPIO0_OR, grego);
+ /* Reset FPGA */
+ grego &= ~GPIO_XCV_PROG; /* PROG line low */
+ out32(IBM405GP_GPIO0_OR, grego);
- goto done;
- }
+ goto done;
+ }
}
printf("\n FPGA load succeeded\n");
@@ -236,7 +236,7 @@ int init_fpga(void)
/* Pedantic */
if ((len < 0x133A4) || (len > 0x80000))
- goto bad_image;
+ goto bad_image;
/*
* Get the file name pointer and length.
@@ -260,16 +260,16 @@ int init_fpga(void)
*/
calc_crc = crc32(0, xcv_buf, xcv_len);
if (crc != calc_crc) {
- printf("\nfailed - bad CRC\n");
- goto done;
+ printf("\nfailed - bad CRC\n");
+ goto done;
}
/* Output the file name */
printf("file name : ");
for (i=0;i<fn_len;i++) {
- bufchar = fn_buf[+i];
- if (bufchar<' ' || bufchar>'~') bufchar = '.';
- putc(bufchar);
+ bufchar = fn_buf[+i];
+ if (bufchar<' ' || bufchar>'~') bufchar = '.';
+ putc(bufchar);
}
/*
@@ -326,7 +326,7 @@ int init_fpga(void)
* Program the FPGA.
*/
retval = fpgaDownload((unsigned char*)xcv_buf, xcv_len,
- (unsigned short *)0xfd000000L);
+ (unsigned short *)0xfd000000L);
return retval;
bad_image:
@@ -377,4 +377,3 @@ void test_fpga(unsigned short *daddr)
printf(" FPGA ready\n");
return;
}
-