diff options
Diffstat (limited to 'arch/arm')
25 files changed, 362 insertions, 70 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 80b0d34190..086ca8514f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -132,6 +132,11 @@ config TARGET_DEVKIT3250 bool "Support devkit3250" select CPU_ARM926EJS +config TARGET_WORK_92105 + bool "Support work_92105" + select CPU_ARM926EJS + select SUPPORT_SPL + config TARGET_MX25PDK bool "Support mx25pdk" select CPU_ARM926EJS @@ -872,6 +877,7 @@ source "board/vpac270/Kconfig" source "board/wandboard/Kconfig" source "board/warp/Kconfig" source "board/woodburn/Kconfig" +source "board/work-microwave/work_92105/Kconfig" source "board/xaeniax/Kconfig" source "board/xilinx/zynqmp/Kconfig" source "board/zipitz2/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index bac3cb27e2..6463c1947c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -2,6 +2,38 @@ # SPDX-License-Identifier: GPL-2.0+ # +# This selects which instruction set is used. +arch-$(CONFIG_CPU_ARM720T) =-march=armv4 +arch-$(CONFIG_CPU_ARM920T) =-march=armv4 +arch-$(CONFIG_CPU_ARM926EJS) =-march=armv5te +arch-$(CONFIG_CPU_ARM946ES) =-march=armv4 +arch-$(CONFIG_CPU_SA1100) =-march=armv4 +arch-$(CONFIG_CPU_PXA) = +arch-$(CONFIG_CPU_ARM1136) =-march=armv5 +arch-$(CONFIG_CPU_ARM1176) =-march=armv5t +arch-$(CONFIG_CPU_V7) =$(call cc-option, -march=armv7-a, -march=armv5) +arch-$(CONFIG_ARM64) =-march=armv8-a + +# Evaluate arch cc-option calls now +arch-y := $(arch-y) + +# This selects how we optimise for the processor. +tune-$(CONFIG_CPU_ARM720T) =-mtune=arm7tdmi +tune-$(CONFIG_CPU_ARM920T) = +tune-$(CONFIG_CPU_ARM926EJS) = +tune-$(CONFIG_CPU_ARM946ES) = +tune-$(CONFIG_CPU_SA1100) =-mtune=strongarm1100 +tune-$(CONFIG_CPU_PXA) =-mcpu=xscale +tune-$(CONFIG_CPU_ARM1136) = +tune-$(CONFIG_CPU_ARM1176) = +tune-$(CONFIG_CPU_V7) = +tune-$(CONFIG_ARM64) = + +# Evaluate tune cc-option calls now +tune-y := $(tune-y) + +PLATFORM_CPPFLAGS += $(arch-y) $(tune-y) + # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_AT91) += at91 diff --git a/arch/arm/cpu/arm1136/config.mk b/arch/arm/cpu/arm1136/config.mk deleted file mode 100644 index a82c6cec9c..0000000000 --- a/arch/arm/cpu/arm1136/config.mk +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# Make ARMv5 to allow more compilers to work, even though its v6. -PLATFORM_CPPFLAGS += -march=armv5 diff --git a/arch/arm/cpu/arm1176/config.mk b/arch/arm/cpu/arm1176/config.mk deleted file mode 100644 index 5dc2ebb27b..0000000000 --- a/arch/arm/cpu/arm1176/config.mk +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# Make ARMv5 to allow more compilers to work, even though its v6. -PLATFORM_CPPFLAGS += -march=armv5t diff --git a/arch/arm/cpu/arm720t/config.mk b/arch/arm/cpu/arm720t/config.mk deleted file mode 100644 index 772fb413e8..0000000000 --- a/arch/arm/cpu/arm720t/config.mk +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2002 -# Sysgo Real-Time Solutions, GmbH <www.elinos.com> -# Marius Groeger <mgroeger@sysgo.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -march=armv4 -mtune=arm7tdmi diff --git a/arch/arm/cpu/arm920t/config.mk b/arch/arm/cpu/arm920t/config.mk deleted file mode 100644 index 799afff028..0000000000 --- a/arch/arm/cpu/arm920t/config.mk +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -march=armv4 diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk deleted file mode 100644 index bdb3da183e..0000000000 --- a/arch/arm/cpu/arm926ejs/config.mk +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -march=armv5te diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/Makefile b/arch/arm/cpu/arm926ejs/lpc32xx/Makefile index 314f004eba..48373776ff 100644 --- a/arch/arm/cpu/arm926ejs/lpc32xx/Makefile +++ b/arch/arm/cpu/arm926ejs/lpc32xx/Makefile @@ -6,3 +6,5 @@ # obj-y = cpu.o clk.o devices.o timer.o + +obj-$(CONFIG_SPL_BUILD) += dram.o lowlevel_init.o diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/clk.c b/arch/arm/cpu/arm926ejs/lpc32xx/clk.c index b7a44d59da..1ef8a36669 100644 --- a/arch/arm/cpu/arm926ejs/lpc32xx/clk.c +++ b/arch/arm/cpu/arm926ejs/lpc32xx/clk.c @@ -98,6 +98,40 @@ unsigned int get_periph_clk_rate(void) return get_hclk_pll_rate() / get_periph_clk_div(); } +unsigned int get_sdram_clk_rate(void) +{ + unsigned int src_clk; + + if (!(readl(&clk->pwr_ctrl) & CLK_PWR_NORMAL_RUN)) + return get_sys_clk_rate(); + + src_clk = get_hclk_pll_rate(); + + if (readl(&clk->sdramclk_ctrl) & CLK_SDRAM_DDR_SEL) { + /* using DDR */ + switch (readl(&clk->hclkdiv_ctrl) & CLK_HCLK_DDRAM_MASK) { + case CLK_HCLK_DDRAM_HALF: + return src_clk/2; + case CLK_HCLK_DDRAM_NOMINAL: + return src_clk; + default: + return 0; + } + } else { + /* using SDR */ + switch (readl(&clk->hclkdiv_ctrl) & CLK_HCLK_ARM_PLL_DIV_MASK) { + case CLK_HCLK_ARM_PLL_DIV_4: + return src_clk/4; + case CLK_HCLK_ARM_PLL_DIV_2: + return src_clk/2; + case CLK_HCLK_ARM_PLL_DIV_1: + return src_clk; + default: + return 0; + } + } +} + int get_serial_clock(void) { return get_periph_clk_rate(); diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c index 35095a9583..f757474076 100644 --- a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c +++ b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c @@ -5,9 +5,11 @@ */ #include <common.h> +#include <netdev.h> #include <asm/arch/cpu.h> #include <asm/arch/clk.h> #include <asm/arch/wdt.h> +#include <asm/arch/sys_proto.h> #include <asm/io.h> static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE; @@ -55,3 +57,11 @@ int print_cpuinfo(void) return 0; } #endif + +#ifdef CONFIG_LPC32XX_ETH +int cpu_eth_init(bd_t *bis) +{ + lpc32xx_eth_initialize(bis); + return 0; +} +#endif diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c index b5676578fd..5a453e303d 100644 --- a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c +++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c @@ -8,10 +8,13 @@ #include <asm/arch/cpu.h> #include <asm/arch/clk.h> #include <asm/arch/uart.h> +#include <asm/arch/mux.h> #include <asm/io.h> +#include <dm.h> static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE; static struct uart_ctrl_regs *ctrl = (struct uart_ctrl_regs *)UART_CTRL_BASE; +static struct mux_regs *mux = (struct mux_regs *)MUX_BASE; void lpc32xx_uart_init(unsigned int uart_id) { @@ -37,3 +40,43 @@ void lpc32xx_uart_init(unsigned int uart_id) writel(CLK_UART_X_DIV(1) | CLK_UART_Y_DIV(1), &clk->u3clk + (uart_id - 3)); } + +void lpc32xx_mac_init(void) +{ + /* Enable MAC interface */ + writel(CLK_MAC_REG | CLK_MAC_SLAVE | CLK_MAC_MASTER + | CLK_MAC_MII, &clk->macclk_ctrl); +} + +void lpc32xx_mlc_nand_init(void) +{ + /* Enable NAND interface */ + writel(CLK_NAND_MLC | CLK_NAND_MLC_INT, &clk->flashclk_ctrl); +} + +void lpc32xx_i2c_init(unsigned int devnum) +{ + /* Enable I2C interface */ + uint32_t ctrl = readl(&clk->i2cclk_ctrl); + if (devnum == 1) + ctrl |= CLK_I2C1_ENABLE; + if (devnum == 2) + ctrl |= CLK_I2C2_ENABLE; + writel(ctrl, &clk->i2cclk_ctrl); +} + +U_BOOT_DEVICE(lpc32xx_gpios) = { + .name = "gpio_lpc32xx" +}; + +/* Mux for SCK0, MISO0, MOSI0. We do not use SSEL0. */ + +#define P_MUX_SET_SSP0 0x1600 + +void lpc32xx_ssp_init(void) +{ + /* Enable SSP0 interface */ + writel(CLK_SSP0_ENABLE_CLOCK, &clk->ssp_ctrl); + /* Mux SSP0 pins */ + writel(P_MUX_SET_SSP0, &mux->p_mux_set); +} diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/dram.c b/arch/arm/cpu/arm926ejs/lpc32xx/dram.c new file mode 100644 index 0000000000..1eea8e2bbf --- /dev/null +++ b/arch/arm/cpu/arm926ejs/lpc32xx/dram.c @@ -0,0 +1,77 @@ +/* + * LPC32xx dram init + * + * (C) Copyright 2014 DENX Software Engineering GmbH + * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr> + * + * This is called by SPL to gain access to the SDR DRAM. + * + * This code runs from SRAM. + * + * Actual CONFIG_LPC32XX_SDRAM_* parameters must be provided + * by the board configuration file. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clk.h> +#include <asm/arch/wdt.h> +#include <asm/arch/emc.h> +#include <asm/io.h> + +static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE; +static struct emc_regs *emc = (struct emc_regs *)EMC_BASE; + +void ddr_init(struct emc_dram_settings *dram) +{ + uint32_t ck; + + /* Enable EMC interface and choose little endian mode */ + writel(1, &emc->ctrl); + writel(0, &emc->config); + /* Select maximum EMC Dynamic Memory Refresh Time */ + writel(0x7FF, &emc->refresh); + /* Determine CLK */ + ck = get_sdram_clk_rate(); + /* Configure SDRAM */ + writel(dram->cmddelay, &clk->sdramclk_ctrl); + writel(dram->config0, &emc->config0); + writel(dram->rascas0, &emc->rascas0); + writel(dram->rdconfig, &emc->read_config); + /* Set timings */ + writel((ck / dram->trp) & 0x0000000F, &emc->t_rp); + writel((ck / dram->tras) & 0x0000000F, &emc->t_ras); + writel((ck / dram->tsrex) & 0x0000007F, &emc->t_srex); + writel((ck / dram->twr) & 0x0000000F, &emc->t_wr); + writel((ck / dram->trc) & 0x0000001F, &emc->t_rc); + writel((ck / dram->trfc) & 0x0000001F, &emc->t_rfc); + writel((ck / dram->txsr) & 0x000000FF, &emc->t_xsr); + writel(dram->trrd, &emc->t_rrd); + writel(dram->tmrd, &emc->t_mrd); + writel(dram->tcdlr, &emc->t_cdlr); + /* Dynamic refresh */ + writel((((ck / dram->refresh) >> 4) & 0x7FF), &emc->refresh); + udelay(10); + /* Force all clocks, enable inverted ck, issue NOP command */ + writel(0x00000193, &emc->control); + udelay(100); + /* Keep all clocks enabled, issue a PRECHARGE ALL command */ + writel(0x00000113, &emc->control); + /* Fast dynamic refresh for at least a few SDRAM ck cycles */ + writel((((128) >> 4) & 0x7FF), &emc->refresh); + udelay(10); + /* set correct dynamic refresh timing */ + writel((((ck / dram->refresh) >> 4) & 0x7FF), &emc->refresh); + udelay(10); + /* set normal mode to CAS=3 */ + writel(0x00000093, &emc->control); + readl(EMC_DYCS0_BASE | dram->mode); + /* set extended mode to all zeroes */ + writel(0x00000093, &emc->control); + readl(EMC_DYCS0_BASE | dram->emode); + /* stop forcing clocks, keep inverted clock, issue normal mode */ + writel(0x00000010, &emc->control); +} diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S b/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S new file mode 100644 index 0000000000..4b8053e3f9 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S @@ -0,0 +1,45 @@ +/* + * WORK Microwave work_92105 board low level init + * + * (C) Copyright 2014 DENX Software Engineering GmbH + * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr> + * + * Low level init is called from SPL to set up the clocks. + * On entry, the LPC3250 is in Direct Run mode with all clocks + * running at 13 MHz; on exit, ARM clock is 208 MHz, HCLK is + * 104 MHz and PCLK is 13 MHz. + * + * This code must run from SRAM so that the clock changes do + * not prevent it from executing. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +.globl lowlevel_init + +lowlevel_init: + + /* Set ARM, HCLK, PCLK dividers for normal mode */ + ldr r0, =0x0000003D + ldr r1, =0x40004040 + str r0, [r1] + + /* Start HCLK PLL for 208 MHz */ + ldr r0, =0x0001401E + ldr r1, =0x40004058 + str r0, [r1] + + /* wait for HCLK PLL to lock */ +1: + ldr r0, [r1] + ands r0, r0, #1 + beq 1b + + /* switch to normal mode */ + ldr r1, =0x40004044 + ldr r0, [r1] + orr r0, #0x00000004 + str r0, [r1] + + /* Return to U-boot via saved link register */ + mov pc, lr diff --git a/arch/arm/cpu/arm946es/config.mk b/arch/arm/cpu/arm946es/config.mk deleted file mode 100644 index 438668d6ff..0000000000 --- a/arch/arm/cpu/arm946es/config.mk +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -march=armv4 diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk index 6c82c3b537..63591d4a29 100644 --- a/arch/arm/cpu/armv7/config.mk +++ b/arch/arm/cpu/armv7/config.mk @@ -5,11 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -# If armv7-a is not supported by GCC fall-back to armv5, which is -# supported by more tool-chains -PF_CPPFLAGS_ARMV7 := $(call cc-option, -march=armv7-a, -march=armv5) -PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV7) - # On supported platforms we set the bit which causes us to trap on unaligned # memory access. This is the opposite of what the compiler expects to be # the default so we must pass in -mno-unaligned-access so that it is aware diff --git a/arch/arm/cpu/armv8/config.mk b/arch/arm/cpu/armv8/config.mk index f5b95591af..685025881c 100644 --- a/arch/arm/cpu/armv8/config.mk +++ b/arch/arm/cpu/armv8/config.mk @@ -6,7 +6,5 @@ # PLATFORM_RELFLAGS += -fno-common -ffixed-x18 -PF_CPPFLAGS_ARMV8 := $(call cc-option, -march=armv8-a) PF_NO_UNALIGNED := $(call cc-option, -mstrict-align) -PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV8) PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED) diff --git a/arch/arm/cpu/pxa/config.mk b/arch/arm/cpu/pxa/config.mk index 525f5d33b7..7fb5316d8f 100644 --- a/arch/arm/cpu/pxa/config.mk +++ b/arch/arm/cpu/pxa/config.mk @@ -6,8 +6,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -mcpu=xscale - # # !WARNING! # The PXA's OneNAND SPL uses .text.0 and .text.1 segments to allow booting from diff --git a/arch/arm/cpu/sa1100/config.mk b/arch/arm/cpu/sa1100/config.mk deleted file mode 100644 index 3afa685b3f..0000000000 --- a/arch/arm/cpu/sa1100/config.mk +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2002 -# Sysgo Real-Time Solutions, GmbH <www.elinos.com> -# Marius Groeger <mgroeger@sysgo.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -march=armv4 -mtune=strongarm1100 diff --git a/arch/arm/include/asm/arch-lpc32xx/clk.h b/arch/arm/include/asm/arch-lpc32xx/clk.h index 92f6c15f20..94498695a0 100644 --- a/arch/arm/include/asm/arch-lpc32xx/clk.h +++ b/arch/arm/include/asm/arch-lpc32xx/clk.h @@ -71,6 +71,7 @@ struct clk_pm_regs { }; /* HCLK Divider Control Register bits */ +#define CLK_HCLK_DDRAM_MASK (0x3 << 7) #define CLK_HCLK_DDRAM_HALF (0x2 << 7) #define CLK_HCLK_DDRAM_NOMINAL (0x1 << 7) #define CLK_HCLK_DDRAM_STOPPED (0x0 << 7) @@ -123,6 +124,10 @@ struct clk_pm_regs { #define CLK_MAC_SLAVE (1 << 1) #define CLK_MAC_REG (1 << 0) +/* I2C Clock Control Register bits */ +#define CLK_I2C2_ENABLE (1 << 1) +#define CLK_I2C1_ENABLE (1 << 0) + /* Timer Clock Control1 Register bits */ #define CLK_TIMCLK_MOTOR (1 << 6) #define CLK_TIMCLK_TIMER3 (1 << 5) @@ -147,11 +152,22 @@ struct clk_pm_regs { /* DMA Clock Control Register bits */ #define CLK_DMA_ENABLE (1 << 0) +/* NAND Clock Control Register bits */ +#define CLK_NAND_MLC (1 << 1) +#define CLK_NAND_MLC_INT (1 << 5) + +/* SSP Clock Control Register bits */ +#define CLK_SSP0_ENABLE_CLOCK (1 << 0) + +/* SDRAMCLK register bits */ +#define CLK_SDRAM_DDR_SEL (1 << 1) + unsigned int get_sys_clk_rate(void); unsigned int get_hclk_pll_rate(void); unsigned int get_hclk_clk_div(void); unsigned int get_hclk_clk_rate(void); unsigned int get_periph_clk_div(void); unsigned int get_periph_clk_rate(void); +unsigned int get_sdram_clk_rate(void); #endif /* _LPC32XX_CLK_H */ diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h index 564441cbfa..d57bc4877e 100644 --- a/arch/arm/include/asm/arch-lpc32xx/config.h +++ b/arch/arm/include/asm/arch-lpc32xx/config.h @@ -52,6 +52,9 @@ #define CONFIG_SYS_BAUDRATE_TABLE \ { 9600, 19200, 38400, 57600, 115200, 230400, 460800 } +/* Ethernet */ +#define LPC32XX_ETH_BASE ETHERNET_BASE + /* NOR Flash */ #if defined(CONFIG_SYS_FLASH_CFI) #define CONFIG_FLASH_CFI_DRIVER diff --git a/arch/arm/include/asm/arch-lpc32xx/cpu.h b/arch/arm/include/asm/arch-lpc32xx/cpu.h index 199b4a026b..0b5dca11b8 100644 --- a/arch/arm/include/asm/arch-lpc32xx/cpu.h +++ b/arch/arm/include/asm/arch-lpc32xx/cpu.h @@ -27,6 +27,7 @@ #define HS_UART7_BASE 0x4001C000 /* High speed UART 7 registers base */ #define RTC_BASE 0x40024000 /* RTC registers base */ #define GPIO_BASE 0x40028000 /* GPIO registers base */ +#define MUX_BASE 0x40028100 /* MUX registers base */ #define WDT_BASE 0x4003C000 /* Watchdog timer registers base */ #define TIMER0_BASE 0x40044000 /* Timer0 registers base */ #define TIMER1_BASE 0x4004C000 /* Timer1 registers base */ @@ -37,6 +38,8 @@ #define UART4_BASE 0x40088000 /* UART 4 registers base */ #define UART5_BASE 0x40090000 /* UART 5 registers base */ #define UART6_BASE 0x40098000 /* UART 6 registers base */ +#define I2C1_BASE 0x400A0000 /* I2C 1 registers base */ +#define I2C2_BASE 0x400A8000 /* I2C 2 registers base */ /* External SDRAM Memory Bank base addresses */ #define EMC_DYCS0_BASE 0x80000000 /* SDRAM DYCS0 base address */ diff --git a/arch/arm/include/asm/arch-lpc32xx/emc.h b/arch/arm/include/asm/arch-lpc32xx/emc.h index 82d9bcce50..1a2bab251f 100644 --- a/arch/arm/include/asm/arch-lpc32xx/emc.h +++ b/arch/arm/include/asm/arch-lpc32xx/emc.h @@ -76,4 +76,25 @@ struct emc_regs { #define EMC_STAT_WAITWR(n) (((n) - 2) & 0x1F) #define EMC_STAT_WAITTURN(n) (((n) - 1) & 0x0F) +/* EMC settings for DRAM */ +struct emc_dram_settings { + u32 cmddelay; + u32 config0; + u32 rascas0; + u32 rdconfig; + u32 trp; + u32 tras; + u32 tsrex; + u32 twr; + u32 trc; + u32 trfc; + u32 txsr; + u32 trrd; + u32 tmrd; + u32 tcdlr; + u32 refresh; + u32 mode; + u32 emode; +}; + #endif /* _LPC32XX_EMC_H */ diff --git a/arch/arm/include/asm/arch-lpc32xx/gpio.h b/arch/arm/include/asm/arch-lpc32xx/gpio.h new file mode 100644 index 0000000000..3bd94e31a5 --- /dev/null +++ b/arch/arm/include/asm/arch-lpc32xx/gpio.h @@ -0,0 +1,43 @@ +/* + * LPC32xx GPIO interface + * + * (C) Copyright 2014 DENX Software Engineering GmbH + * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/** + * GPIO Register map for LPC32xx + */ + +struct gpio_regs { + u32 p3_inp_state; + u32 p3_outp_set; + u32 p3_outp_clr; + u32 p3_outp_state; + /* Watch out! the following are shared between p2 and p3 */ + u32 p2_p3_dir_set; + u32 p2_p3_dir_clr; + u32 p2_p3_dir_state; + /* Now back to 'one register for one port' */ + u32 p2_inp_state; + u32 p2_outp_set; + u32 p2_outp_clr; + u32 reserved1[6]; + u32 p0_inp_state; + u32 p0_outp_set; + u32 p0_outp_clr; + u32 p0_outp_state; + u32 p0_dir_set; + u32 p0_dir_clr; + u32 p0_dir_state; + u32 reserved2; + u32 p1_inp_state; + u32 p1_outp_set; + u32 p1_outp_clr; + u32 p1_outp_state; + u32 p1_dir_set; + u32 p1_dir_clr; + u32 p1_dir_state; +}; diff --git a/arch/arm/include/asm/arch-lpc32xx/mux.h b/arch/arm/include/asm/arch-lpc32xx/mux.h new file mode 100644 index 0000000000..dc1b5bcdfd --- /dev/null +++ b/arch/arm/include/asm/arch-lpc32xx/mux.h @@ -0,0 +1,18 @@ +/* + * LPC32xx MUX interface + * + * (C) Copyright 2015 DENX Software Engineering GmbH + * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/** + * MUX register map for LPC32xx + */ + +struct mux_regs { + u32 p_mux_set; + u32 p_mux_clr; + u32 p_mux_state; +}; diff --git a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h index 28812be3cb..c3d890dde4 100644 --- a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h +++ b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h @@ -7,6 +7,14 @@ #ifndef _LPC32XX_SYS_PROTO_H #define _LPC32XX_SYS_PROTO_H -void lpc32xx_uart_init(unsigned int uart_id); +#include <asm/arch/emc.h> +void lpc32xx_uart_init(unsigned int uart_id); +void lpc32xx_mac_init(void); +void lpc32xx_mlc_nand_init(void); +void lpc32xx_i2c_init(unsigned int devnum); +void lpc32xx_ssp_init(void); +#if defined(CONFIG_SPL_BUILD) +void ddr_init(const struct emc_dram_settings *dram); +#endif #endif /* _LPC32XX_SYS_PROTO_H */ |