summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG24
-rw-r--r--MAKEALL2
-rw-r--r--Makefile5
-rw-r--r--board/altera/common/flash.c40
-rw-r--r--board/altera/dk1c20/dk1c20.c2
-rw-r--r--board/altera/dk1s10/dk1s10.c10
-rw-r--r--board/altera/dk1s10/vectors.S21
-rw-r--r--cpu/nios/Makefile2
-rw-r--r--cpu/nios/spi.c158
-rw-r--r--doc/README.dk1c2012
-rw-r--r--doc/README.dk1c20_std325
-rw-r--r--doc/README.dk1s10131
-rw-r--r--doc/README.dk1s10_mldk20286
-rw-r--r--doc/README.dk1s10_std325
-rw-r--r--doc/README.dk20k200_std322
-rw-r--r--doc/README.nios9
-rw-r--r--include/configs/DK1C20.h280
-rw-r--r--include/configs/DK1C20_safe_32.h34
-rw-r--r--include/configs/DK1C20_standard_32.h279
-rw-r--r--include/configs/DK1S10.h352
-rw-r--r--include/configs/DK1S10_mtx_ldk_20.h187
-rw-r--r--include/configs/DK1S10_safe_32.h34
-rw-r--r--include/configs/DK1S10_standard_32.h274
-rw-r--r--include/nios-io.h2
-rw-r--r--lib_nios/board.c2
-rw-r--r--rtc/ds1306.c515
26 files changed, 1925 insertions, 748 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 588c112a5f..78914c16d3 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,30 @@
Changes since U-Boot 1.0.1:
======================================================================
+* Patches by Stephan Linz, 30 Jan 2004:
+ 1: - board/altera/common/flash.c:flash_erase():
+ o allow interrupts befor get_timer() call
+ o check-up each erased sector and avoid unexpected timeouts
+ - board/altera/dk1c20/dk1s10.c:board_early_init_f():
+ o enclose sevenseg_set() in cpp condition
+ - remove the ASMI configuration for DK1S10_standard_32 (never present)
+ - fix some typed in mistakes in the NIOS documentation
+ 2: - split DK1C20 configuration into several header files:
+ o two new files for each NIOS CPU description
+ o U-Boot related part is remaining in DK1C20.h
+ 3: - split DK1S10 configuration into several header files:
+ o two new files for each NIOS CPU description
+ o U-Boot related part is remaining in DK1S10.h
+ 4: - Add support for the Microtronix Linux Development Kit
+ NIOS CPU configuration at the Altera Nios Development Kit,
+ Stratix Edition (DK-1S10)
+ 5: - Add documentation for the Altera Nios Development Kit,
+ Stratix Edition (DK-1S10)
+ 6: - Add support for the Nios Serial Peripharel Interface (SPI)
+ (master only)
+ 7: - Add support for the common U-Boot SPI framework at
+ RTC driver DS1306
+
* Patch by Rahul Shanbhag, 28 Jan 2004:
Fix flash protection/locking handling for OMAP1610 innovator board.
diff --git a/MAKEALL b/MAKEALL
index f8cdcb930c..c8dfb67d3a 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -177,7 +177,7 @@ LIST_x86="${LIST_I486}"
LIST_nios=" \
DK1C20 DK1C20_standard_32 \
- DK1S10 DK1S10_standard_32 \
+ DK1S10 DK1S10_standard_32 DK1S10_mtx_ldk_20 \
"
#-----------------------------------------------------------------------
diff --git a/Makefile b/Makefile
index e622e68bcf..56c84ec86a 100644
--- a/Makefile
+++ b/Makefile
@@ -1064,6 +1064,7 @@ DK1C20_config: unconfig
DK1S10_safe_32_config \
DK1S10_standard_32_config \
+DK1S10_mtx_ldk_20_config \
DK1S10_config: unconfig
@ >include/config.h
@[ -z "$(findstring _safe_32,$@)" ] || \
@@ -1074,6 +1075,10 @@ DK1S10_config: unconfig
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
echo "... NIOS 'standard_32' configuration" ; \
}
+ @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
+ { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>include/config.h ; \
+ echo "... NIOS 'mtx_ldk_20' configuration" ; \
+ }
@[ -z "$(findstring DK1S10_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
diff --git a/board/altera/common/flash.c b/board/altera/common/flash.c
index 0fa74abfd4..2638ea899a 100644
--- a/board/altera/common/flash.c
+++ b/board/altera/common/flash.c
@@ -71,7 +71,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
volatile CFG_FLASH_WORD_SIZE *addr2;
int prot, sect;
- int any = 0;
unsigned oldpri;
ulong start;
@@ -94,6 +93,12 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
printf ("\n");
}
+#ifdef DEBUG
+ for (sect = s_first; sect <= s_last; sect++) {
+ printf("- Erase: Sect: %i @ 0x%08x\n", sect, info->start[sect]);
+ }
+#endif
+
/* NOTE: disabling interrupts on Nios can be very bad since it
* also disables the LO_LIMIT exception. It's better here to
* set the interrupt priority to 3 & restore it when we're done.
@@ -114,27 +119,26 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
*addr = 0xaa;
*addr = 0x55;
*addr2 = 0x30;
- any = 1;
- }
- }
-
- /* Now just wait for 0xff & provide some user feedback while
- * we wait.
- */
- if (any) {
- addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
- start = get_timer (0);
- while (*addr2 != 0xff) {
- udelay (1000 * 1000);
- putc ('.');
- if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
- printf ("timeout\n");
- return 1;
+ /* Now just wait for 0xff & provide some user
+ * feedback while we wait. Here we have to grant
+ * timer interrupts. Otherwise get_timer() can't
+ * work right. */
+ ipri(oldpri);
+ start = get_timer (0);
+ while (*addr2 != 0xff) {
+ udelay (1000 * 1000);
+ putc ('.');
+ if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ printf ("timeout\n");
+ return 1;
+ }
}
+ oldpri = ipri (3); /* disallow non important irqs again */
}
- printf ("\n");
}
+ printf ("\n");
+
/* Restore interrupt priority */
ipri (oldpri);
diff --git a/board/altera/dk1c20/dk1c20.c b/board/altera/dk1c20/dk1c20.c
index 3954486791..fd85706825 100644
--- a/board/altera/dk1c20/dk1c20.c
+++ b/board/altera/dk1c20/dk1c20.c
@@ -33,8 +33,10 @@ void _default_hdlr (void)
int board_early_init_f (void)
{
+#if defined(CONFIG_SEVENSEG)
/* init seven segment led display and switch off */
sevenseg_set(SEVENSEG_OFF);
+#endif
return 0;
}
diff --git a/board/altera/dk1s10/dk1s10.c b/board/altera/dk1s10/dk1s10.c
index 832a0b9dd8..c45e7f15d7 100644
--- a/board/altera/dk1s10/dk1s10.c
+++ b/board/altera/dk1s10/dk1s10.c
@@ -33,14 +33,24 @@ void _default_hdlr (void)
int board_early_init_f (void)
{
+#if defined(CONFIG_SEVENSEG)
/* init seven segment led display and switch off */
sevenseg_set(SEVENSEG_OFF);
+#endif
return 0;
}
int checkboard (void)
{
puts ("Board: Altera Nios 1S10 Development Kit\n");
+#if defined(CONFIG_NIOS_SAFE_32)
+ puts ("Conf.: Altera Safe 32 (safe_32)\n");
+#elif defined(CONFIG_NIOS_STANDARD_32)
+ puts ("Conf.: Altera Standard 32 (standard_32)\n");
+#elif defined(CONFIG_NIOS_MTX_LDK_20)
+ puts ("Conf.: Microtronix LDK 2.0 (LDK2)\n");
+#endif
+
return 0;
}
diff --git a/board/altera/dk1s10/vectors.S b/board/altera/dk1s10/vectors.S
index 7094eb63ea..2f44875dcc 100644
--- a/board/altera/dk1s10/vectors.S
+++ b/board/altera/dk1s10/vectors.S
@@ -1,6 +1,7 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
+ * Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -21,6 +22,8 @@
* MA 02111-1307 USA
*/
+#include <config.h>
+
/*************************************************************************
* Exception Vector Table
@@ -55,8 +58,14 @@
.align 4
_vectors:
- .long _def_xhandler@h /* Vector 0 - NMI */
- .long _cwp_lolimit@h /* Vector 1 - underflow */
+#if defined(CFG_NIOS_CPU_OCI_BASE)
+ /* OCI does the reset job */
+ .long _def_xhandler@h /* Vector 0 - NMI / Reset */
+#else
+ /* there is no OCI, so we have to do a direct reset jump here */
+ .long CFG_NIOS_CPU_RST_VECT /* Vector 0 - Reset to GERMS */
+#endif
+ .long _cwp_lolimit@h /* Vector 1 - underflow */
.long _cwp_hilimit@h /* Vector 2 - overflow */
.long _def_xhandler@h /* Vector 3 - GNUPro debug */
@@ -72,7 +81,11 @@ _vectors:
.long _def_xhandler@h /* Vector 13 - future reserved */
.long _def_xhandler@h /* Vector 14 - future reserved */
.long _def_xhandler@h /* Vector 15 - future reserved */
+#if (CFG_NIOS_TMRIRQ == 16)
+ .long _timebase_int@h /* Vector 16 - lopri timer*/
+#else
.long _def_xhandler@h /* Vector 16 */
+#endif
.long _def_xhandler@h /* Vector 17 */
.long _def_xhandler@h /* Vector 18 */
.long _def_xhandler@h /* Vector 19 */
@@ -106,7 +119,11 @@ _vectors:
.long _def_xhandler@h /* Vector 47 */
.long _def_xhandler@h /* Vector 48 */
.long _def_xhandler@h /* Vector 49 */
+#if (CFG_NIOS_TMRIRQ == 50)
.long _timebase_int@h /* Vector 50 - lopri timer*/
+#else
+ .long _def_xhandler@h /* Vector 50 */
+#endif
.long _def_xhandler@h /* Vector 51 */
.long _def_xhandler@h /* Vector 52 */
.long _def_xhandler@h /* Vector 53 */
diff --git a/cpu/nios/Makefile b/cpu/nios/Makefile
index a9adbc593c..78553256a0 100644
--- a/cpu/nios/Makefile
+++ b/cpu/nios/Makefile
@@ -27,7 +27,7 @@ LIB = lib$(CPU).a
START = start.o
AOBJS = traps.o
-OBJS = cpu.o interrupts.o serial.o asmi.o
+OBJS = cpu.o interrupts.o serial.o asmi.o spi.o
all: .depend $(START) $(LIB)
diff --git a/cpu/nios/spi.c b/cpu/nios/spi.c
new file mode 100644
index 0000000000..f37146b793
--- /dev/null
+++ b/cpu/nios/spi.c
@@ -0,0 +1,158 @@
+/*
+ * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/ctype.h>
+
+#if defined(CONFIG_NIOS_SPI)
+#include <nios-io.h>
+#include <spi.h>
+
+#if !defined(CFG_NIOS_SPIBASE)
+#error "*** CFG_NIOS_SPIBASE not defined ***"
+#endif
+
+#if !defined(CFG_NIOS_SPIBITS)
+#error "*** CFG_NIOS_SPIBITS not defined ***"
+#endif
+
+#if (CFG_NIOS_SPIBITS != 8) && (CFG_NIOS_SPIBITS != 16)
+#error "*** CFG_NIOS_SPIBITS should be either 8 or 16 ***"
+#endif
+
+static nios_spi_t *spi = (nios_spi_t *)CFG_NIOS_SPIBASE;
+
+/* Warning:
+ * You cannot enable DEBUG for early system initalization, i. e. when
+ * this driver is used to read environment parameters like "baudrate"
+ * from EEPROM which are used to initialize the serial port which is
+ * needed to print the debug messages...
+ */
+#undef DEBUG
+
+#ifdef DEBUG
+
+#define DPRINT(a) printf a;
+/* -----------------------------------------------
+ * Helper functions to peek into tx and rx buffers
+ * ----------------------------------------------- */
+static const char * const hex_digit = "0123456789ABCDEF";
+
+static char quickhex (int i)
+{
+ return hex_digit[i];
+}
+
+static void memdump (void *pv, int num)
+{
+ int i;
+ unsigned char *pc = (unsigned char *) pv;
+
+ for (i = 0; i < num; i++)
+ printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
+ printf ("\t");
+ for (i = 0; i < num; i++)
+ printf ("%c", isprint (pc[i]) ? pc[i] : '.');
+ printf ("\n");
+}
+#else /* !DEBUG */
+
+#define DPRINT(a)
+#define memdump(p,n)
+
+#endif /* DEBUG */
+
+
+/*
+ * SPI transfer:
+ *
+ * See include/spi.h and http://www.altera.com/literature/ds/ds_nios_spi.pdf
+ * for more informations.
+ */
+int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+{
+ int j;
+
+ DPRINT(("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
+ (int)chipsel, *(uint *)dout, *(uint *)din, bitlen));
+
+ memdump((void*)dout, (bitlen + 7) / 8);
+
+ if(chipsel != NULL) {
+ chipsel(1); /* select the target chip */
+ }
+
+ if (bitlen > CFG_NIOS_SPIBITS) { /* leave chip select active */
+ spi->control |= NIOS_SPI_SSO;
+ }
+
+ for ( j = 0; /* count each byte in */
+ j < ((bitlen + 7) / 8); /* dout[] and din[] */
+
+#if (CFG_NIOS_SPIBITS == 8)
+ j++) {
+
+ while ((spi->status & NIOS_SPI_TRDY) == 0)
+ ;
+ spi->txdata = (unsigned)(dout[j]);
+
+ while ((spi->status & NIOS_SPI_RRDY) == 0)
+ ;
+ din[j] = (unsigned char)(spi->rxdata & 0xff);
+
+#elif (CFG_NIOS_SPIBITS == 16)
+ j++, j++) {
+
+ while ((spi->status & NIOS_SPI_TRDY) == 0)
+ ;
+ if ((j+1) < ((bitlen + 7) / 8))
+ spi->txdata = (unsigned)((dout[j] << 8) | dout[j+1]);
+ else
+ spi->txdata = (unsigned)(dout[j] << 8);
+
+ while ((spi->status & NIOS_SPI_RRDY) == 0)
+ ;
+ din[j] = (unsigned char)((spi->rxdata >> 8) & 0xff);
+ if ((j+1) < ((bitlen + 7) / 8))
+ din[j+1] = (unsigned char)(spi->rxdata & 0xff);
+
+#else
+#error "*** unsupported value of CFG_NIOS_SPIBITS ***"
+#endif
+
+ }
+
+ if (bitlen > CFG_NIOS_SPIBITS) {
+ spi->control &= ~NIOS_SPI_SSO;
+ }
+
+ if(chipsel != NULL) {
+ chipsel(0); /* deselect the target chip */
+ }
+
+ memdump((void*)din, (bitlen + 7) / 8);
+
+ return 0;
+}
+
+#endif /* CONFIG_NIOS_SPI */
diff --git a/doc/README.dk1c20 b/doc/README.dk1c20
index bf3b6995e1..3c0e41bf7d 100644
--- a/doc/README.dk1c20
+++ b/doc/README.dk1c20
@@ -24,7 +24,7 @@ Contents:
1. Files
=========
- board/dk1c20/*
+ board/altera/dk1c20/*
include/configs/DK1C20.h
2. Memory Organization
@@ -73,11 +73,7 @@ see the following:
2. Quit nios-run and start your terminal application (e.g. start
Hyperterminal or minicom).
-3. From the U-Boot command prompt, erase flash 0x40000 to 0x 5ffff:
-
- ==> erase 1:4-5
-
-4. Download the u-boot code to RAM. When using Hyperterminal, do the
+3. Download the u-boot code to RAM. When using Hyperterminal, do the
following:
a. From the u-boot command prompt start a binary download to SRAM:
@@ -86,6 +82,10 @@ following:
b. Download u-boot.bin using kermit.
+4. From the U-Boot command prompt, erase flash 0x40000 to 0x5ffff:
+
+ ==> erase 1:4-5
+
5. Copy the binary image from SRAM to flash:
==> cp.b 800000 40000 10000
diff --git a/doc/README.dk1c20_std32 b/doc/README.dk1c20_std32
index 4822c6fa70..521fab75fd 100644
--- a/doc/README.dk1c20_std32
+++ b/doc/README.dk1c20_std32
@@ -91,10 +91,10 @@ IDE: (TODO)
0x02000000 ---32-----------16|15------------0-
| : | \
| : | |
- SDRAM | : | > CFG_NIOS_CPU_SRAM_SIZE
+ SDRAM | : | > CFG_NIOS_CPU_SDRAM_SIZE
| : | | = 0x01000000
| : | /
- 0x01000000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE
+ 0x01000000 ---32-----------16|15------------0- CFG_NIOS_CPU_SDRAM_BASE
| |
: gap :
: :
@@ -345,6 +345,7 @@ IDE: (TODO)
| : | |
0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
| : | /
+ 0x00000000 |- - - - - - - -:- - - - - - - -+- - u-boot environment
0x00000000 ---8-------------4|3-------------0-
diff --git a/doc/README.dk1s10 b/doc/README.dk1s10
new file mode 100644
index 0000000000..bb8375a6b8
--- /dev/null
+++ b/doc/README.dk1s10
@@ -0,0 +1,131 @@
+
+ Nios Development Kit
+ Startix Editions
+
+ Last Update: January 28, 2004
+====================================================================
+
+This file contains information regarding U-Boot and the Altera
+Nios Development Kit, Startix Edition (DK-1S10). For general Nios
+information see doc/README.nios.
+
+Most stuff of this file was borrowed and based on README.dk1c20,
+the DK-1C20 related information file.
+
+For those interested in contributing ... see HELP WANTED section
+in doc/README.nios.
+
+Contents:
+
+ 1. Files
+ 2. Memory Organization
+ 3. CPU Variations
+ 4. Examples
+ 5. Programming U-Boot into FLASH with GERMS
+
+====================================================================
+
+1. Files
+=========
+ board/altera/dk1s10/*
+ include/configs/DK1S10.h
+
+2. Memory Organization
+=======================
+
+ -The heap is placed below the monitor (U-Boot code).
+ -Global data is placed below the heap.
+ -The stack is placed below global data (&grows down).
+
+3. CPU Variations
+=================
+
+There are more than one NIOS CPU variation for the DK-1S10. U-Boot
+supports the following CPU configurations:
+
+ - Altera Standard 32 (make DK1S10_standard_32_config)
+ - Microtronix LDK 2.0 (make DK1S10_mtx_ldk_20_config)
+
+4. Examples
+============
+
+The hello_world example was never tested on DK-1S10. Neverthelse
+it should work as far as possible, because the DK-1S10 port is
+more than ninetieth percents equal to the DK-1C20 port and at
+this platform the hello_world example was already tested
+successfully (see README.dk1c20).
+
+
+5. Programming U-Boot into FLASH with GERMS
+============================================
+The current version of the DK-1S10 port with the default
+configuration settings occupies about 78 KBytes of flash.
+A minimal configuration occupies less than 60 KByte
+(network support disabled).
+
+To program U-Boot into the DK-1S10 flash using GERMS do the
+following:
+
+1. From the command line, download U-Boot using the nios-run:
+
+ $ nios-run -r u-boot.srec
+
+This takes about 45 seconds (GERMS is not very speedy here).
+After u-boot is downloaded it will be executed. You should
+see the following:
+
+ U-Boot 1.0.2 (Jan 28 2004 - 19:02:30)
+
+ CPU: Nios-32 Rev. 3.3 (0x3038)
+ Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14
+ Board: Altera Nios 1S10 Development Kit
+ In: serial
+ Out: serial
+ Err: serial
+ DK1S10 >
+
+
+2. Quit nios-run and start your terminal application (e.g. start
+ Hyperterminal or minicom).
+
+3. Download the u-boot code to RAM. When using Hyperterminal, do the
+ following:
+
+ a. From the u-boot command prompt start a binary download to
+ SRAM / SDRAM:
+
+ at the Altera Standard 32 to SRAM:
+
+ ==> loadb 800000
+
+ at the Microtronix LDK 2.0 to SDRAM:
+
+ ==> loadb 1010000
+
+ b. Download u-boot.bin using kermit.
+
+4. From the U-Boot command prompt, erase flash:
+
+ at the Altera Standard 32 from 0x40000 to 0x5ffff:
+
+ ==> erase 1:4-5
+
+ at the Microtronix LDK 2.0 from 0x8000000 to 0x81ffff:
+
+ ==> erase 1:0-1
+
+5. Copy the binary image from SRAM / SDRAM to flash:
+
+ at the Altera Standard 32 to SRAM:
+
+ ==> cp.b 800000 40000 $(filesize)
+
+ at the Microtronix LDK 2.0 to SDRAM:
+
+ ==> cp.b 1010000 8000000 $(filesize)
+
+U-Boot will now automatically start when the board is powered on or
+reset using the Standard-32 configuration. To start U-Boot with the
+Safe-32 configuration, enter the following GERMS command:
+
+ + g 40000
diff --git a/doc/README.dk1s10_mldk20 b/doc/README.dk1s10_mldk20
new file mode 100644
index 0000000000..fcf8170d66
--- /dev/null
+++ b/doc/README.dk1s10_mldk20
@@ -0,0 +1,286 @@
+
+TODO: specify IDE i/f
+
+
+===============================================================================
+ C P U , M E M O R Y , I N / O U T C O M P O N E N T S
+===============================================================================
+see also [1]-[5]
+
+CPU: "LDK2"
+ 32 bit NIOS for 75 MHz
+ 512 Byte for register file (30 levels)
+ with out instruction cache
+ with out data cache
+ 2 KByte On Chip ROM with GERMS boot monitor
+ with out On Chip RAM
+ MSTEP multiplier
+ no Debug Core
+ no On Chip Instrumentation (OCI)
+
+ U-Boot CFG: CFG_NIOS_CPU_CLK = 75000000
+ CFG_NIOS_CPU_ICACHE = (not present)
+ CFG_NIOS_CPU_DCACHE = (not present)
+ CFG_NIOS_CPU_REG_NUMS = 512
+ CFG_NIOS_CPU_MUL = 0
+ CFG_NIOS_CPU_MSTEP = 1
+ CFG_NIOS_CPU_DBG_CORE = 0
+
+IRQ: Nr. | used by
+ ------+--------------------------------------------------------
+ 16 | TIMER0 | CFG_NIOS_CPU_TIMER0_IRQ = 16
+ 17 | UART0 | CFG_NIOS_CPU_UART0_IRQ = 17
+ 18 | UART1 | CFG_NIOS_CPU_UART1_IRQ = 18
+ 20 | LAN91C111 | CFG_NIOS_CPU_LAN0_IRQ = 20
+ 25 | IDE0 | CFG_NIOS_CPU_IDE0_IRQ = 25
+
+MEMORY: 8 MByte Flash
+ 16 MByte SDRAM
+
+Timer: TIMER0: high priority programmable timer (IRQ16)
+
+ U-Boot CFG: CFG_NIOS_CPU_TICK_TIMER = 0
+ CFG_NIOS_CPU_USER_TIMER = (not present)
+
+PIO: Nr. | description
+ ------+--------------------------------------------------------
+ PIO0 | CFPOWER: 1 output to controll CF power supply
+ PIO1 | BUTTON: 4 inputs for user push buttons (no IRQ)
+ ------+--------------------------------------------------------
+ not | LCD: 11 in/outputs for ASCII LCD
+ pres.| LED: 8 outputs for user LEDs
+ | SEVENSEG: 16 outputs for user seven segment display
+ | RECONF: 1 in/output for . . . . . . . . . . . .
+ | CFPRESENT: 1 input for CF present event (IRQ35)
+ | CFATASEL: 1 output to controll CF ATA card select
+
+ U-Boot CFG: CFG_NIOS_CPU_BUTTON_PIO = 1
+ CFG_NIOS_CPU_LCD_PIO = (not present)
+ CFG_NIOS_CPU_LED_PIO = (not present)
+ CFG_NIOS_CPU_SEVENSEG_PIO = (not present)
+ CFG_NIOS_CPU_RECONF_PIO = (not present)
+ CFG_NIOS_CPU_CFPRESENT_PIO = (not present)
+ CFG_NIOS_CPU_CFPOWER_PIO = 0
+ CFG_NIOS_CPU_CFATASEL_PIO = (not present)
+
+UART: UART0: fixed baudrate of 115200, fixed protocol 8N2,
+ without handshake RTS/CTS (IRQ17)
+ UART1: fixed baudrate of 115200, fixed protocol 8N1,
+ without handshake RTS/CTS (IRQ18)
+
+LAN: SMsC LAN91C111 with:
+ - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
+ - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
+
+IDE: (TODO)
+
+
+===============================================================================
+ M E M O R Y M A P
+===============================================================================
+
+- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - -
+
+ 0x02000000 ---32-----------16|15------------0- CFG_NIOS_CPU_STACK
+ 0x02000000 --+32-----------16|15------------0+
+ | . | \ \
+ | . | | |
+ | . | | > stack area
+ | . | | |
+ | . | | V
+ | . | |
+ | . | |
+ SDRAM | . | > CFG_NIOS_CPU_SDRAM_SIZE
+ | . | | = 0x01000000
+ | . | |
+ 0x01000100 |- - - - - - - - - - - - - - - -+-|-
+ | . | | \
+ | . | | |
+ | . | | > CFG_NIOS_CPU_VEC_SIZE
+ | . | | | = 0x00000100
+ | | / /
+ 0x01000000 |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_VEC_BASE
+ 0x01000000 ---32-----------16|15------------0- CFG_NIOS_CPU_SDRAM_BASE
+ | sector 127 | \
+ + 0x7f0000 |- - - - - - - - - - - - - - - -| |
+ | : | |
+ Flash |- - - - : - - - -| > CFG_NIOS_CPU_FLASH_SIZE
+ | sector 1 : | | = 0x00800000
+ + 0x010000 |- - - - - - - - - - - - - - - -| |
+ | sector 0 (size = 0x10000) | /
+ 0x00800000 ---8-------------4|3-------------0- CFG_NIOS_CPU_FLASH_BASE
+ | |
+ : gap :
+ : :
+
+- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
+
+ : :
+ : gap :
+ | |
+ 0x00020000 ---32-----------16|15------------0-
+ | gap | \
+ 0x00010310 --+-------------------------------| |
+ | | |
+ | register bank (size = 0x10) | |
+ | +--------.---.---.--- | |
+ | | bank 0 \ 1 \ 2 \ 3 \ | |
+ | |---------------------------+ | |
+ LAN91C111 | | BANK | RESERVED | | |
+ | |- - - - - - -|- - - - - - -| | > na_enet_size
+ | | RPCR | MIR | | | = 0x00010000
+ | |- - - - - - -|- - - - - - -| | |
+ | | COUNTER | RCR | | |
+ | |- - - - - - -|- - - - - - -| | |
+ | | EPH STATUS | TCR | | |
+ | +---------------------------+ | |
+ 0x00010300 --+--LAN91C111_REGISTERS_OFFSET---| |
+ | gap | /
+ 0x00010000 ---32-----------16|15------------0- CFG_NIOS_CPU_LAN0_BASE
+ | |
+ : gap :
+ : :
+
+- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
+
+ : :
+ : gap :
+ | |
+ 0x00000980 ---32-----------16|15------------0-
+ | | | \
+ : (real size : : |
+ IDE i/f : and content : : > 0x00000080
+ [5] : unknown) : : |
+ | | | /
+ 0x00000900 ---32-----------16|15------------0- CFG_NIOS_CPU_IDE0
+ | | \
+ : gap : > (space for PIO4..7)
+ | | /
+ 0x000008c0 ---32-----------16|15------------0-
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ UART1 | (unused) | > 0x00000020
+ [2] + 0x10 |- - - - - - - - - - - - - - - -| |
+ | control (10 bit) (rw) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | status (10 bit) (rw) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | txdata (8 bit) (wo) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | rxdata (8 bit) (ro) | /
+ 0x000008a0 ---32-----------16|15------------0- CFG_NIOS_CPU_UART1
+ | | \
+ : gap : > (space for PIO2..3)
+ | | /
+ 0x00000880 ---32-----------16|15------------0-
+ | edgecapture (4 bit) (rw) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO1 | interruptmask (4 bit) (rw) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (4 bit) (ro) | /
+ 0x00000870 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO1
+ | (unused) | \
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ PIO0 | (unused) | |
+ [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
+ | (unused) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | data (1 bit) (wo) | /
+ 0x00000860 ---32-----------16|15------------0- CFG_NIOS_CPU_PIO0
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | snaph (16 bit) (rw) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ TIMER0 | snapl (16 bit) (rw) | |
+ [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
+ | periodh (16 bit) (rw) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | periodl (16 bit) (rw) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | control (4 bit) (rw) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | status (2 bit) (rw) | /
+ 0x00000840 ---32-----------16|15------------0- CFG_NIOS_CPU_TIMER0
+ | | \
+ : gap : > (space for UART2)
+ | | /
+ 0x00000820 ---32-----------16|15------------0-
+ | (unused) | \
+ + 0x1c |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x18 |- - - - - - - - - - - - - - - -| |
+ | (unused) | |
+ + 0x14 |- - - - - - - - - - - - - - - -| |
+ UART0 | (unused) | > 0x00000020
+ [2] + 0x10 |- - - - - - - - - - - - - - - -| |
+ | control (10 bit) (rw) | |
+ + 0x0c |- - - - - - - - - - - - - - - -| |
+ | status (10 bit) (rw) | |
+ + 0x08 |- - - - - - - - - - - - - - - -| |
+ | txdata (8 bit) (wo) | |
+ + 0x04 |- - - - - - - - - - - - - - - -| |
+ | rxdata (8 bit) (ro) | /
+ 0x00000800 ---32-----------16|15------------0- CFG_NIOS_CPU_UART0
+
+- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
+
+ 0x00000800 ---32-----------16|15------------0-
+ | : | \
+ | : | |
+ GERMS | : | > CFG_NIOS_CPU_ROM_SIZE
+ | : | | = 0x00000800
+ | : | /
+ 0x00000000 |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
+ 0x00000000 ---32-----------16|15------------0- CFG_NIOS_CPU_ROM_BASE
+
+===============================================================================
+ F L A S H M E M O R Y A L L O C A T I O N
+===============================================================================
+
+ 0x01000000 ---8-------------4|3-------------0-
+ | : | \
+ SAFE | : | > 1 MByte
+ FPGA conf. | : | / (NOT usable by software)
+ 0x00f00000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ USER | : | > 1 MByte
+ FPGA conf. | : | / (NOT usable by software)
+ 0x00e00000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ | : | |
+ WEB pages | : | > 2 MByte
+ | : | | (provisory usable)
+ | : | /
+ 0x00c00000 --+- - - - - - - -:- - - - - - - -+-
+ | : | \
+ | : | |
+ | : | |
+ | : | > 4 MByte free for use
+ | : | |
+ 0x00840000 --+- - - - - - - -:- - - - - - - -+-|- u-boot environment
+ | : | /
+ 0x00800000 |- - - - - - - -:- - - - - - - -+- - u-boot _start()
+ 0x00800000 ---8-------------4|3-------------0-
+
+
+===============================================================================
+ R E F E R E N C E S
+===============================================================================
+[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf
+[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
+[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
+[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
+[5] http://www.opencores.org/projects/ata/
+ http://www.t13.org/index.html
+
+
+===============================================================================
+Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1s10_std32 b/doc/README.dk1s10_std32
index 33ae15e6dd..d649eb3793 100644
--- a/doc/README.dk1s10_std32
+++ b/doc/README.dk1s10_std32
@@ -87,10 +87,10 @@ IDE: (TODO)
0x02000000 ---32-----------16|15------------0-
| : | \
| : | |
- SDRAM | : | > CFG_NIOS_CPU_SRAM_SIZE
+ SDRAM | : | > CFG_NIOS_CPU_SDRAM_SIZE
| : | | = 0x01000000
| : | /
- 0x01000000 ---32-----------16|15------------0- CFG_NIOS_CPU_SRAM_BASE
+ 0x01000000 ---32-----------16|15------------0- CFG_NIOS_CPU_SDRAM_BASE
| |
: gap :
: :
@@ -335,6 +335,7 @@ IDE: (TODO)
| : | |
0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
| : | /
+ 0x00000000 |- - - - - - - -:- - - - - - - -+- - u-boot environment
0x00000000 ---8-------------4|3-------------0-
diff --git a/doc/README.dk20k200_std32 b/doc/README.dk20k200_std32
index 2c2b1d6b41..7b5d4d4810 100644
--- a/doc/README.dk20k200_std32
+++ b/doc/README.dk20k200_std32
@@ -117,7 +117,7 @@ UART: UART0: fixed baudrate of 115200, fixed protocol 8N2,
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
+ UART1 | (unused) | > 0x00000020
[2] + 0x10 |- - - - - - - - - - - - - - - -| |
| control (10 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
diff --git a/doc/README.nios b/doc/README.nios
index af21b3e427..08f4e7ef98 100644
--- a/doc/README.nios
+++ b/doc/README.nios
@@ -1,7 +1,7 @@
U-Boot for Nios-32
- Last Update: January 2, 2004
+ Last Update: February 1, 2004
====================================================================
This file contains information regarding U-Boot and the Altera
@@ -103,6 +103,13 @@ CFG_NIOS_TMRMS -- the period of the timer in milliseconds.
CFG_NIOS_ASMIBASE -- the base address of the ASMI peripheral.
(standard-32: na_asmi_base).
+CFG_NIOS_SPIBASE -- the base address of the SPI master (!) peripheral.
+ (nasys_spi_0)
+
+CFG_NIOS_SPIBITS -- the amount of configured SPI data bits in PTF.
+ This value can be 8 or 16 only! (PTF: databits)
+
+
2.2 Differences in U-Boot Options/Settings
-------------------------------------------
Some 'standard' U-Boot options/settings are treated differently in
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
index f3570512e2..2d77dd7938 100644
--- a/include/configs/DK1C20.h
+++ b/include/configs/DK1C20.h
@@ -25,264 +25,17 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-/*
- * NIOS CPU configuration.
+/***********************************************************************
+ * Include the whole NIOS CPU configuration.
*
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
+ * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
*
- * #define CFG_NIOS_CPU_ICACHE 4096
- * #define CFG_NIOS_CPU_DCACHE 0
- * #define CFG_NIOS_CPU_OCI_BASE 0
- * #define CFG_NIOS_CPU_OCI_SIZE 0
- */
+ ***********************************************************************/
#if defined(CONFIG_NIOS_SAFE_32)
-
-/* TODO */
-
+#include <configs/DK1C20_safe_32.h>
#elif defined(CONFIG_NIOS_STANDARD_32)
-
-/* CPU core */
-#define CFG_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
-#define CFG_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */
-#define CFG_NIOS_CPU_DCACHE (4 * 1024) /* data cache */
-#define CFG_NIOS_CPU_REG_NUMS 256 /* number of register */
-#define CFG_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_STACK 0x008fff00 /* stack top addr */
-#define CFG_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */
-#define CFG_NIOS_CPU_VEC_SIZE 256 /* size */
-#define CFG_NIOS_CPU_VEC_NUMS 64 /* numbers */
-#define CFG_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */
-#define CFG_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
- /* yes(1) */
-
-/* on-chip extensions */
-#define CFG_NIOS_CPU_RAM_BASE 0 /* on chip RAM addr */
-#define CFG_NIOS_CPU_RAM_SIZE 0 /* size */
-
-#define CFG_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */
-#define CFG_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
-
-#define CFG_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */
-#define CFG_NIOS_CPU_OCI_SIZE 256 /* size */
-
-/* timer */
-#define CFG_NIOS_CPU_TIMER_NUMS 2 /* number of timer */
-
-#define CFG_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */
-#define CFG_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
-#define CFG_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
-#define CFG_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
- /* yes(1) */
-
-#define CFG_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */
-#define CFG_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */
-#define CFG_NIOS_CPU_TIMER1_PER 10000 /* periode usec */
-#define CFG_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */
- /* yes(1) */
-
-/* serial i/o */
-#define CFG_NIOS_CPU_UART_NUMS 1 /* number of uarts */
-
-#define CFG_NIOS_CPU_UART0 0x00920900 /* UART0 addr */
-#define CFG_NIOS_CPU_UART0_IRQ 25 /* IRQ */
-#define CFG_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
-#define CFG_NIOS_CPU_UART0_DB 8 /* data bit */
-#define CFG_NIOS_CPU_UART0_SB 1 /* stop bit */
-#define CFG_NIOS_CPU_UART0_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CFG_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
- /* crts(1) */
-#define CFG_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-/* parallel i/o */
-#define CFG_NIOS_CPU_PIO_NUMS 8 /* number of parports */
-
-#define CFG_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */
-#define CFG_NIOS_CPU_PIO0_IRQ 40 /* IRQ */
-#define CFG_NIOS_CPU_PIO0_BITS 4 /* number of bits */
-#define CFG_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */
-#undef CFG_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
-#define CFG_NIOS_CPU_PIO1_BITS 11 /* number of bits */
-#define CFG_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */
-#undef CFG_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
-#define CFG_NIOS_CPU_PIO2_BITS 8 /* number of bits */
-#define CFG_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */
-#undef CFG_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
-#define CFG_NIOS_CPU_PIO3_BITS 16 /* number of bits */
-#define CFG_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */
-#undef CFG_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
-#define CFG_NIOS_CPU_PIO4_BITS 1 /* number of bits */
-#define CFG_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */
-#define CFG_NIOS_CPU_PIO5_IRQ 35 /* IRQ */
-#define CFG_NIOS_CPU_PIO5_BITS 1 /* number of bits */
-#define CFG_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */
-#undef CFG_NIOS_CPU_PIO6_IRQ /* w/o IRQ */
-#define CFG_NIOS_CPU_PIO6_BITS 1 /* number of bits */
-#define CFG_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */
-#undef CFG_NIOS_CPU_PIO7_IRQ /* w/o IRQ */
-#define CFG_NIOS_CPU_PIO7_BITS 1 /* number of bits */
-#define CFG_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-/* IDE i/f */
-#define CFG_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
-#define CFG_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */
-
-/* active serial memory i/f */
-#define CFG_NIOS_CPU_ASMI_NUMS 1 /* number of ASMI */
-#define CFG_NIOS_CPU_ASMI0 0x00920b00 /* ASMI0 addr */
-#define CFG_NIOS_CPU_ASMI0_IRQ 45 /* IRQ */
-
-/* memory accessibility */
-#define CFG_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */
-#define CFG_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */
-
-#define CFG_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
-#define CFG_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
-
-#define CFG_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */
-#define CFG_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
-
-/* LAN */
-#define CFG_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
-
-#define CFG_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */
-#define CFG_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
-#define CFG_NIOS_CPU_LAN0_IRQ 30 /* IRQ */
-#define CFG_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
-#define CFG_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
- /* cs8900(1) */
- /* ex: alteramac(2) */
-
-/* symbolic redefinition (undef, if not present) */
-#define CFG_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */
-#define CFG_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/
-
-#define CFG_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */
-#define CFG_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */
-#define CFG_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */
-#define CFG_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */
-#define CFG_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */
-#define CFG_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */
-#define CFG_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */
-#define CFG_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */
-
+#include <configs/DK1C20_standard_32.h>
#else
#error *** CFG_ERROR: you have to setup right NIOS CPU configuration
#endif
@@ -419,9 +172,6 @@
#if (CFG_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
- /****************************************************/
- /* !!! LAN91C111 works for NIOS with patch only !!! */
- /****************************************************/
#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
#define CONFIG_SMC91111_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
@@ -558,15 +308,15 @@
#if (CFG_NIOS_CPU_SEVENSEG_PIO == 0)
-#error *** CFG_ERROR: status LEDs at PIO0 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO0 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 1)
-#error *** CFG_ERROR: status LEDs at PIO1 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO1 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 2)
-#error *** CFG_ERROR: status LEDs at PIO2 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO2 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 3)
@@ -582,27 +332,27 @@
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 4)
-#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO4 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 5)
-#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO5 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 6)
-#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO6 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 7)
-#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO7 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 8)
-#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO8 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 9)
-#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO9 not supported, expand your config.h
#else
#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_SEVENSEG_PIO in right case
diff --git a/include/configs/DK1C20_safe_32.h b/include/configs/DK1C20_safe_32.h
new file mode 100644
index 0000000000..a483e87664
--- /dev/null
+++ b/include/configs/DK1C20_safe_32.h
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_DK1C20_SAFE_32_H
+#define __CONFIG_DK1C20_SAFE_32_H
+
+/*
+ * NIOS CPU configuration. (PART OF configs/DK1C20.h)
+ *
+ * !!! TODO !!! TODO !!!
+ */
+#error *** CFG_ERROR: DK1C20_safe_32 have to be defined (use DK1C20_standard_32 as template)
+
+#endif /* __CONFIG_DK1C20_SAFE_32_H */
diff --git a/include/configs/DK1C20_standard_32.h b/include/configs/DK1C20_standard_32.h
new file mode 100644
index 0000000000..ed08121cc2
--- /dev/null
+++ b/include/configs/DK1C20_standard_32.h
@@ -0,0 +1,279 @@
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_DK1C20_STANDARD_32_H
+#define __CONFIG_DK1C20_STANDARD_32_H
+
+/*
+ * NIOS CPU configuration. (PART OF configs/DK1C20.h)
+ *
+ * Here we must define CPU dependencies. Any unsupported option have to
+ * be defined with zero, example CPU without data cache / OCI:
+ *
+ * #define CFG_NIOS_CPU_ICACHE 4096
+ * #define CFG_NIOS_CPU_DCACHE 0
+ * #define CFG_NIOS_CPU_OCI_BASE 0
+ * #define CFG_NIOS_CPU_OCI_SIZE 0
+ */
+
+/* CPU core */
+#define CFG_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
+#define CFG_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */
+#define CFG_NIOS_CPU_DCACHE (4 * 1024) /* data cache */
+#define CFG_NIOS_CPU_REG_NUMS 256 /* number of register */
+#define CFG_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_STACK 0x008fff00 /* stack top addr */
+#define CFG_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */
+#define CFG_NIOS_CPU_VEC_SIZE 256 /* size */
+#define CFG_NIOS_CPU_VEC_NUMS 64 /* numbers */
+#define CFG_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */
+#define CFG_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
+ /* yes(1) */
+
+/* on-chip extensions */
+#define CFG_NIOS_CPU_RAM_BASE 0 /* on chip RAM addr */
+#define CFG_NIOS_CPU_RAM_SIZE 0 /* size */
+
+#define CFG_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */
+#define CFG_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
+
+#define CFG_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */
+#define CFG_NIOS_CPU_OCI_SIZE 256 /* size */
+
+/* timer */
+#define CFG_NIOS_CPU_TIMER_NUMS 2 /* number of timer */
+
+#define CFG_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */
+#define CFG_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
+#define CFG_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
+#define CFG_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
+ /* yes(1) */
+
+#define CFG_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */
+#define CFG_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */
+#define CFG_NIOS_CPU_TIMER1_PER 10000 /* periode usec */
+#define CFG_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */
+ /* yes(1) */
+
+/* serial i/o */
+#define CFG_NIOS_CPU_UART_NUMS 1 /* number of uarts */
+
+#define CFG_NIOS_CPU_UART0 0x00920900 /* UART0 addr */
+#define CFG_NIOS_CPU_UART0_IRQ 25 /* IRQ */
+#define CFG_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
+#define CFG_NIOS_CPU_UART0_DB 8 /* data bit */
+#define CFG_NIOS_CPU_UART0_SB 1 /* stop bit */
+#define CFG_NIOS_CPU_UART0_PA 0 /* parity none(0) */
+ /* odd(1) */
+ /* even(2) */
+#define CFG_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
+ /* crts(1) */
+#define CFG_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
+ /* yes(1) */
+
+/* parallel i/o */
+#define CFG_NIOS_CPU_PIO_NUMS 8 /* number of parports */
+
+#define CFG_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */
+#define CFG_NIOS_CPU_PIO0_IRQ 40 /* IRQ */
+#define CFG_NIOS_CPU_PIO0_BITS 4 /* number of bits */
+#define CFG_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */
+#undef CFG_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO1_BITS 11 /* number of bits */
+#define CFG_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */
+#undef CFG_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO2_BITS 8 /* number of bits */
+#define CFG_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */
+#undef CFG_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO3_BITS 16 /* number of bits */
+#define CFG_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */
+#undef CFG_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO4_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */
+#define CFG_NIOS_CPU_PIO5_IRQ 35 /* IRQ */
+#define CFG_NIOS_CPU_PIO5_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */
+#undef CFG_NIOS_CPU_PIO6_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO6_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */
+#undef CFG_NIOS_CPU_PIO7_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO7_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+/* IDE i/f */
+#define CFG_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
+#define CFG_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */
+
+/* active serial memory i/f */
+#define CFG_NIOS_CPU_ASMI_NUMS 1 /* number of ASMI */
+#define CFG_NIOS_CPU_ASMI0 0x00920b00 /* ASMI0 addr */
+#define CFG_NIOS_CPU_ASMI0_IRQ 45 /* IRQ */
+
+/* memory accessibility */
+#define CFG_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */
+#define CFG_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */
+
+#define CFG_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
+#define CFG_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
+
+#define CFG_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */
+#define CFG_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
+
+/* LAN */
+#define CFG_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
+
+#define CFG_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */
+#define CFG_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
+#define CFG_NIOS_CPU_LAN0_IRQ 30 /* IRQ */
+#define CFG_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
+#define CFG_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
+ /* cs8900(1) */
+ /* ex: alteramac(2) */
+
+/* symbolic redefinition (undef, if not present) */
+#define CFG_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */
+#define CFG_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/
+
+#define CFG_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */
+#define CFG_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */
+#define CFG_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */
+#define CFG_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */
+#define CFG_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */
+#define CFG_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */
+#define CFG_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */
+#define CFG_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */
+
+#endif /* __CONFIG_DK1C20_STANDARD_32_H */
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h
index bd7ded52b9..835c7a23e1 100644
--- a/include/configs/DK1S10.h
+++ b/include/configs/DK1S10.h
@@ -24,264 +24,19 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-/*
- * NIOS CPU configuration.
+/***********************************************************************
+ * Include the whole NIOS CPU configuration.
*
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
+ * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
*
- * #define CFG_NIOS_CPU_ICACHE 4096
- * #define CFG_NIOS_CPU_DCACHE 0
- * #define CFG_NIOS_CPU_OCI_BASE 0
- * #define CFG_NIOS_CPU_OCI_SIZE 0
- */
+ ***********************************************************************/
#if defined(CONFIG_NIOS_SAFE_32)
-
-/* TODO */
-
+#include <configs/DK1S10_safe_32.h>
#elif defined(CONFIG_NIOS_STANDARD_32)
-
-/* CPU core */
-#define CFG_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
-#define CFG_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */
-#define CFG_NIOS_CPU_DCACHE (4 * 1024) /* data cache */
-#define CFG_NIOS_CPU_REG_NUMS 256 /* number of register */
-#define CFG_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_STACK 0x008fff00 /* stack top addr */
-#define CFG_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */
-#define CFG_NIOS_CPU_VEC_SIZE 256 /* size */
-#define CFG_NIOS_CPU_VEC_NUMS 64 /* numbers */
-#define CFG_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */
-#define CFG_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
- /* yes(1) */
-
-/* on-chip extensions */
-#define CFG_NIOS_CPU_RAM_BASE 0x00900000 /* on chip RAM addr */
-#define CFG_NIOS_CPU_RAM_SIZE (64 * 1024) /* 64 KB size */
-
-#define CFG_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */
-#define CFG_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
-
-#define CFG_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */
-#define CFG_NIOS_CPU_OCI_SIZE 256 /* size */
-
-/* timer */
-#define CFG_NIOS_CPU_TIMER_NUMS 2 /* number of timer */
-
-#define CFG_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */
-#define CFG_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
-#define CFG_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
-#define CFG_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
- /* yes(1) */
-
-#define CFG_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */
-#define CFG_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */
-#define CFG_NIOS_CPU_TIMER1_PER 10000 /* periode usec */
-#define CFG_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */
- /* yes(1) */
-
-/* serial i/o */
-#define CFG_NIOS_CPU_UART_NUMS 1 /* number of uarts */
-
-#define CFG_NIOS_CPU_UART0 0x00920900 /* UART0 addr */
-#define CFG_NIOS_CPU_UART0_IRQ 25 /* IRQ */
-#define CFG_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
-#define CFG_NIOS_CPU_UART0_DB 8 /* data bit */
-#define CFG_NIOS_CPU_UART0_SB 1 /* stop bit */
-#define CFG_NIOS_CPU_UART0_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CFG_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
- /* crts(1) */
-#define CFG_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-/* parallel i/o */
-#define CFG_NIOS_CPU_PIO_NUMS 8 /* number of parports */
-
-#define CFG_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */
-#define CFG_NIOS_CPU_PIO0_IRQ 40 /* IRQ */
-#define CFG_NIOS_CPU_PIO0_BITS 4 /* number of bits */
-#define CFG_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */
-#undef CFG_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
-#define CFG_NIOS_CPU_PIO1_BITS 11 /* number of bits */
-#define CFG_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */
-#undef CFG_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
-#define CFG_NIOS_CPU_PIO2_BITS 8 /* number of bits */
-#define CFG_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */
-#undef CFG_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
-#define CFG_NIOS_CPU_PIO3_BITS 16 /* number of bits */
-#define CFG_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */
-#undef CFG_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
-#define CFG_NIOS_CPU_PIO4_BITS 1 /* number of bits */
-#define CFG_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */
-#define CFG_NIOS_CPU_PIO5_IRQ 35 /* IRQ */
-#define CFG_NIOS_CPU_PIO5_BITS 1 /* number of bits */
-#define CFG_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */
-#undef CFG_NIOS_CPU_PIO6_IRQ /* w/o IRQ */
-#define CFG_NIOS_CPU_PIO6_BITS 1 /* number of bits */
-#define CFG_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CFG_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */
-#undef CFG_NIOS_CPU_PIO7_IRQ /* w/o IRQ */
-#define CFG_NIOS_CPU_PIO7_BITS 1 /* number of bits */
-#define CFG_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CFG_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CFG_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CFG_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-/* IDE i/f */
-#define CFG_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
-#define CFG_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */
-
-/* active serial memory i/f */
-#define CFG_NIOS_CPU_ASMI_NUMS 1 /* number of ASMI */
-#define CFG_NIOS_CPU_ASMI0 0x00920b00 /* ASMI0 addr */
-#define CFG_NIOS_CPU_ASMI0_IRQ 45 /* IRQ */
-
-/* memory accessibility */
-#define CFG_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */
-#define CFG_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */
-
-#define CFG_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
-#define CFG_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
-
-#define CFG_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */
-#define CFG_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
-
-/* LAN */
-#define CFG_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
-
-#define CFG_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */
-#define CFG_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
-#define CFG_NIOS_CPU_LAN0_IRQ 30 /* IRQ */
-#define CFG_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
-#define CFG_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
- /* cs8900(1) */
- /* ex: alteramac(2) */
-
-/* symbolic redefinition (undef, if not present) */
-#define CFG_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */
-#define CFG_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/
-
-#define CFG_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */
-#define CFG_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */
-#define CFG_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */
-#define CFG_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */
-#define CFG_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */
-#define CFG_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */
-#define CFG_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */
-#define CFG_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */
-
+#include <configs/DK1S10_standard_32.h>
+#elif defined(CONFIG_NIOS_MTX_LDK_20)
+#include <configs/DK1S10_mtx_ldk_20.h>
#else
#error *** CFG_ERROR: you have to setup right NIOS CPU configuration
#endif
@@ -308,8 +63,18 @@
#error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config
#endif
-#define CFG_SRAM_BASE CFG_NIOS_CPU_SRAM_BASE
-#define CFG_SRAM_SIZE CFG_NIOS_CPU_SRAM_SIZE
+#if defined(CFG_NIOS_CPU_SRAM_BASE) && defined(CFG_NIOS_CPU_SRAM_SIZE)
+
+#define CFG_SRAM_BASE CFG_NIOS_CPU_SRAM_BASE
+#define CFG_SRAM_SIZE CFG_NIOS_CPU_SRAM_SIZE
+
+#else
+
+#undef CFG_SRAM_BASE
+#undef CFG_SRAM_SIZE
+
+#endif
+
#define CFG_VECT_BASE CFG_NIOS_CPU_VEC_BASE
/*------------------------------------------------------------------------
@@ -355,7 +120,15 @@
#if (CFG_NIOS_CPU_FLASH_SIZE != 0)
#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */
+
+#if defined(CONFIG_NIOS_STANDARD_32)
#define CFG_ENV_ADDR CFG_FLASH_BASE /* Mem addr of env */
+#elif defined(CONFIG_NIOS_MTX_LDK_20)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#else
+#error *** CFG_ERROR: you have to setup the environment base address CFG_ENV_ADDR
+#endif
+
#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
@@ -388,11 +161,18 @@
* TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
* so an avalon bus timer is required.
*----------------------------------------------------------------------*/
-#if (CFG_NIOS_CPU_TIMER_NUMS != 0)
+#if (CFG_NIOS_CPU_TIMER_NUMS != 0) && defined(CFG_NIOS_CPU_TICK_TIMER)
#if (CFG_NIOS_CPU_TICK_TIMER == 0)
-#error *** CFG_ERROR: tick timer at TIMER0 not supported, expand your config.h
+#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */
+#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ
+
+#if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
+#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
+#else
+#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ
+#endif
#elif (CFG_NIOS_CPU_TICK_TIMER == 1)
@@ -418,9 +198,6 @@
#if (CFG_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
- /****************************************************/
- /* !!! LAN91C111 works for NIOS with patch only !!! */
- /****************************************************/
#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
#define CONFIG_SMC91111_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
@@ -463,7 +240,7 @@
/*------------------------------------------------------------------------
* STATUS LEDs
*----------------------------------------------------------------------*/
-#if (CFG_NIOS_CPU_PIO_NUMS != 0)
+#if (CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_LED_PIO)
#if (CFG_NIOS_CPU_LED_PIO == 0)
@@ -553,19 +330,19 @@
/*------------------------------------------------------------------------
* SEVEN SEGMENT LED DISPLAY
*----------------------------------------------------------------------*/
-#if (CFG_NIOS_CPU_PIO_NUMS != 0)
+#if (CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_SEVENSEG_PIO)
#if (CFG_NIOS_CPU_SEVENSEG_PIO == 0)
-#error *** CFG_ERROR: status LEDs at PIO0 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO0 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 1)
-#error *** CFG_ERROR: status LEDs at PIO1 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO1 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 2)
-#error *** CFG_ERROR: status LEDs at PIO2 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO2 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 3)
@@ -581,27 +358,27 @@
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 4)
-#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO4 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 5)
-#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO5 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 6)
-#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO6 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 7)
-#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO7 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 8)
-#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO8 not supported, expand your config.h
#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 9)
-#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO9 not supported, expand your config.h
#else
#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_SEVENSEG_PIO in right case
@@ -692,17 +469,40 @@
#define CFG_MAXARGS 16 /* max number of command args*/
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+/* Default load address */
#if (CFG_SRAM_SIZE != 0)
-#define CFG_LOAD_ADDR CFG_SRAM_BASE /* Default load address */
+
+/* default in SRAM */
+#define CFG_LOAD_ADDR CFG_SRAM_BASE
+
+#elif (CFG_SDRAM_SIZE != 0)
+
+/* default in SDRAM */
+#if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
+#else
+#define CFG_LOAD_ADDR CFG_SDRAM_BASE
+#endif
+
#else
-#undef CFG_LOAD_ADDR
+#undef CFG_LOAD_ADDR /* force error break */
#endif
+
+/* MEM test area */
#if (CFG_SDRAM_SIZE != 0)
-#define CFG_MEMTEST_START CFG_SDRAM_BASE /* SDRAM til stack area */
-#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024)) /* 1MB stack */
+
+/* SDRAM begin to stack area (1MB stack) */
+#if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
+#define CFG_MEMTEST_START (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
+#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024))
+#else
+#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024))
+#endif
+
#else
-#undef CFG_MEMTEST_START
+#undef CFG_MEMTEST_START /* force error break */
#undef CFG_MEMTEST_END
#endif
diff --git a/include/configs/DK1S10_mtx_ldk_20.h b/include/configs/DK1S10_mtx_ldk_20.h
new file mode 100644
index 0000000000..4eb96290bb
--- /dev/null
+++ b/include/configs/DK1S10_mtx_ldk_20.h
@@ -0,0 +1,187 @@
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_DK1S10_MTX_LDK_20_H
+#define __CONFIG_DK1S10_MTX_LDK_20_H
+
+/*
+ * NIOS CPU configuration. (PART OF configs/DK1S10.h)
+ *
+ * Here we must define CPU dependencies. Any unsupported option have to
+ * be defined with zero, example CPU without data cache / OCI:
+ *
+ * #define CFG_NIOS_CPU_ICACHE 4096
+ * #define CFG_NIOS_CPU_DCACHE 0
+ * #define CFG_NIOS_CPU_OCI_BASE 0
+ * #define CFG_NIOS_CPU_OCI_SIZE 0
+ */
+
+/* CPU core */
+#define CFG_NIOS_CPU_CLK 75000000 /* NIOS CPU clock */
+#define CFG_NIOS_CPU_ICACHE (0) /* instruction cache */
+#define CFG_NIOS_CPU_DCACHE (0) /* data cache */
+#define CFG_NIOS_CPU_REG_NUMS 512 /* number of register */
+#define CFG_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_STACK 0x02000000 /* stack top addr */
+#define CFG_NIOS_CPU_VEC_BASE 0x01000000 /* IRQ vectors addr */
+#define CFG_NIOS_CPU_VEC_SIZE 256 /* size */
+#define CFG_NIOS_CPU_VEC_NUMS 64 /* numbers */
+#define CFG_NIOS_CPU_RST_VECT 0x00000000 /* RESET vector addr */
+#define CFG_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
+ /* yes(1) */
+
+/* The offset address in flash to check for the Nios signature "Ni".
+ * (see GM_FlashExec in germs_monitor.s) */
+#define CFG_NIOS_CPU_EXES_OFFS 0x0C
+
+/* on-chip extensions */
+#undef CFG_NIOS_CPU_RAM_BASE /* on chip RAM addr */
+#undef CFG_NIOS_CPU_RAM_SIZE /* 64 KB size */
+
+#define CFG_NIOS_CPU_ROM_BASE 0x00000000 /* on chip ROM addr */
+#define CFG_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
+
+#undef CFG_NIOS_CPU_OCI_BASE /* OCI core addr */
+#undef CFG_NIOS_CPU_OCI_SIZE /* size */
+
+/* timer */
+#define CFG_NIOS_CPU_TIMER_NUMS 1 /* number of timer */
+
+#define CFG_NIOS_CPU_TIMER0 0x00000840 /* TIMER0 addr */
+#define CFG_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
+#define CFG_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
+#define CFG_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
+ /* yes(1) */
+
+/* serial i/o */
+#define CFG_NIOS_CPU_UART_NUMS 2 /* number of uarts */
+
+#define CFG_NIOS_CPU_UART0 0x00000800 /* UART0 addr */
+#define CFG_NIOS_CPU_UART0_IRQ 17 /* IRQ */
+#define CFG_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
+#define CFG_NIOS_CPU_UART0_DB 8 /* data bit */
+#define CFG_NIOS_CPU_UART0_SB 2 /* stop bit */
+#define CFG_NIOS_CPU_UART0_PA 0 /* parity none(0) */
+ /* odd(1) */
+ /* even(2) */
+#define CFG_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
+ /* crts(1) */
+#define CFG_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
+ /* yes(1) */
+
+#define CFG_NIOS_CPU_UART1 0x000008a0 /* UART1 addr */
+#define CFG_NIOS_CPU_UART1_IRQ 18 /* IRQ */
+#define CFG_NIOS_CPU_UART1_BR 115200 /* baudrate var(0) */
+#define CFG_NIOS_CPU_UART1_DB 8 /* data bit */
+#define CFG_NIOS_CPU_UART1_SB 1 /* stop bit */
+#define CFG_NIOS_CPU_UART1_PA 0 /* parity none(0) */
+ /* odd(1) */
+ /* even(2) */
+#define CFG_NIOS_CPU_UART1_HS 0 /* handshake: no(0) */
+ /* crts(1) */
+#define CFG_NIOS_CPU_UART1_EOP 0 /* eop reg: no(0) */
+ /* yes(1) */
+
+/* parallel i/o */
+#define CFG_NIOS_CPU_PIO_NUMS 2 /* number of parports */
+
+#define CFG_NIOS_CPU_PIO0 0x00000860 /* PIO0 addr */
+#undef CFG_NIOS_CPU_PIO0_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO0_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO0_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO0_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO0_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO0_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO1 0x00000870 /* PIO1 addr */
+#undef CFG_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO1_BITS 4 /* number of bits */
+#define CFG_NIOS_CPU_PIO1_TYPE 2 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+/* IDE i/f */
+#define CFG_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
+#define CFG_NIOS_CPU_IDE0 0x00000900 /* IDE0 addr */
+#define CFG_NIOS_CPU_IDE0_IRQ 25 /* IRQ */
+
+/* memory accessibility */
+#undef CFG_NIOS_CPU_SRAM_BASE /* board SRAM addr */
+#undef CFG_NIOS_CPU_SRAM_SIZE /* 1 MB size */
+
+#define CFG_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
+#define CFG_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
+
+#define CFG_NIOS_CPU_FLASH_BASE 0x00800000 /* board Flash addr */
+#define CFG_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
+
+/* LAN */
+#define CFG_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
+
+#define CFG_NIOS_CPU_LAN0_BASE 0x00010000 /* LAN0 addr */
+#define CFG_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
+#define CFG_NIOS_CPU_LAN0_IRQ 20 /* IRQ */
+#define CFG_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
+#define CFG_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
+ /* cs8900(1) */
+ /* ex: openmac(2) */
+ /* ex: alteramac(3) */
+
+/* symbolic redefinition (undef, if not present) */
+#define CFG_NIOS_CPU_TICK_TIMER 0 /* TIMER0: tick (needed)*/
+#undef CFG_NIOS_CPU_USER_TIMER /* TIMERx: users choice */
+
+#define CFG_NIOS_CPU_CFPOWER_PIO 0 /* PIO0: CF power/sw. */
+#define CFG_NIOS_CPU_BUTTON_PIO 1 /* PIO1: buttons */
+#undef CFG_NIOS_CPU_LCD_PIO /* PIOx: ASCII LCD */
+#undef CFG_NIOS_CPU_LED_PIO /* PIOx: LED bar */
+#undef CFG_NIOS_CPU_SEVENSEG_PIO /* PIOx: 7-seg. display */
+#undef CFG_NIOS_CPU_RECONF_PIO /* PIOx: reconf pin */
+#undef CFG_NIOS_CPU_CFPRESENT_PIO /* PIOx: CF present IRQ */
+#undef CFG_NIOS_CPU_CFATASEL_PIO /* PIOx: CF ATA select */
+
+#endif /* __CONFIG_DK1S10_MTX_LDK_20_H */
diff --git a/include/configs/DK1S10_safe_32.h b/include/configs/DK1S10_safe_32.h
new file mode 100644
index 0000000000..8541a119f7
--- /dev/null
+++ b/include/configs/DK1S10_safe_32.h
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_DK1S10_SAFE_32_H
+#define __CONFIG_DK1S10_SAFE_32_H
+
+/*
+ * NIOS CPU configuration. (PART OF configs/DK1S10.h)
+ *
+ * !!! TODO !!! TODO !!!
+ */
+#error *** CFG_ERROR: DK1S10_safe_32 have to be defined (use DK1S10_standard_32 as template)
+
+#endif /* __CONFIG_DK1S10_SAFE_32_H */
diff --git a/include/configs/DK1S10_standard_32.h b/include/configs/DK1S10_standard_32.h
new file mode 100644
index 0000000000..b83c31592a
--- /dev/null
+++ b/include/configs/DK1S10_standard_32.h
@@ -0,0 +1,274 @@
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_DK1S10_STANDARD_32_H
+#define __CONFIG_DK1S10_STANDARD_32_H
+
+/*
+ * NIOS CPU configuration. (PART OF configs/DK1S10.h)
+ *
+ * Here we must define CPU dependencies. Any unsupported option have to
+ * be defined with zero, example CPU without data cache / OCI:
+ *
+ * #define CFG_NIOS_CPU_ICACHE 4096
+ * #define CFG_NIOS_CPU_DCACHE 0
+ * #define CFG_NIOS_CPU_OCI_BASE 0
+ * #define CFG_NIOS_CPU_OCI_SIZE 0
+ */
+
+/* CPU core */
+#define CFG_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
+#define CFG_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */
+#define CFG_NIOS_CPU_DCACHE (4 * 1024) /* data cache */
+#define CFG_NIOS_CPU_REG_NUMS 256 /* number of register */
+#define CFG_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_STACK 0x008fff00 /* stack top addr */
+#define CFG_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */
+#define CFG_NIOS_CPU_VEC_SIZE 256 /* size */
+#define CFG_NIOS_CPU_VEC_NUMS 64 /* numbers */
+#define CFG_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */
+#define CFG_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
+ /* yes(1) */
+
+/* on-chip extensions */
+#define CFG_NIOS_CPU_RAM_BASE 0x00900000 /* on chip RAM addr */
+#define CFG_NIOS_CPU_RAM_SIZE (64 * 1024) /* 64 KB size */
+
+#define CFG_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */
+#define CFG_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
+
+#define CFG_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */
+#define CFG_NIOS_CPU_OCI_SIZE 256 /* size */
+
+/* timer */
+#define CFG_NIOS_CPU_TIMER_NUMS 2 /* number of timer */
+
+#define CFG_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */
+#define CFG_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
+#define CFG_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
+#define CFG_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
+ /* yes(1) */
+
+#define CFG_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */
+#define CFG_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */
+#define CFG_NIOS_CPU_TIMER1_PER 10000 /* periode usec */
+#define CFG_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */
+ /* yes(1) */
+
+/* serial i/o */
+#define CFG_NIOS_CPU_UART_NUMS 1 /* number of uarts */
+
+#define CFG_NIOS_CPU_UART0 0x00920900 /* UART0 addr */
+#define CFG_NIOS_CPU_UART0_IRQ 25 /* IRQ */
+#define CFG_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
+#define CFG_NIOS_CPU_UART0_DB 8 /* data bit */
+#define CFG_NIOS_CPU_UART0_SB 1 /* stop bit */
+#define CFG_NIOS_CPU_UART0_PA 0 /* parity none(0) */
+ /* odd(1) */
+ /* even(2) */
+#define CFG_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
+ /* crts(1) */
+#define CFG_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
+ /* yes(1) */
+
+/* parallel i/o */
+#define CFG_NIOS_CPU_PIO_NUMS 8 /* number of parports */
+
+#define CFG_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */
+#define CFG_NIOS_CPU_PIO0_IRQ 40 /* IRQ */
+#define CFG_NIOS_CPU_PIO0_BITS 4 /* number of bits */
+#define CFG_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */
+#undef CFG_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO1_BITS 11 /* number of bits */
+#define CFG_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */
+#undef CFG_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO2_BITS 8 /* number of bits */
+#define CFG_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */
+#undef CFG_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO3_BITS 16 /* number of bits */
+#define CFG_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */
+#undef CFG_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO4_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */
+#define CFG_NIOS_CPU_PIO5_IRQ 35 /* IRQ */
+#define CFG_NIOS_CPU_PIO5_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */
+#undef CFG_NIOS_CPU_PIO6_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO6_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+#define CFG_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */
+#undef CFG_NIOS_CPU_PIO7_IRQ /* w/o IRQ */
+#define CFG_NIOS_CPU_PIO7_BITS 1 /* number of bits */
+#define CFG_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */
+ /* out(1) */
+ /* in(2) */
+#define CFG_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */
+ /* yes(1) */
+#define CFG_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */
+ /* fall(1) */
+ /* rise(2) */
+ /* any(3) */
+#define CFG_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */
+ /* level(1)*/
+ /* edge(2) */
+
+/* IDE i/f */
+#define CFG_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
+#define CFG_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */
+
+/* memory accessibility */
+#define CFG_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */
+#define CFG_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */
+
+#define CFG_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
+#define CFG_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
+
+#define CFG_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */
+#define CFG_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
+
+/* LAN */
+#define CFG_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
+
+#define CFG_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */
+#define CFG_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
+#define CFG_NIOS_CPU_LAN0_IRQ 30 /* IRQ */
+#define CFG_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
+#define CFG_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
+ /* cs8900(1) */
+ /* ex: alteramac(2) */
+
+/* symbolic redefinition (undef, if not present) */
+#define CFG_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */
+#define CFG_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/
+
+#define CFG_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */
+#define CFG_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */
+#define CFG_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */
+#define CFG_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */
+#define CFG_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */
+#define CFG_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */
+#define CFG_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */
+#define CFG_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */
+
+#endif /* __CONFIG_DK1S10_STANDARD_32_H */
diff --git a/include/nios-io.h b/include/nios-io.h
index 64da92abfe..08aa9f976c 100644
--- a/include/nios-io.h
+++ b/include/nios-io.h
@@ -117,7 +117,7 @@ typedef volatile struct nios_spi_t {
unsigned status; /* Status reg */
unsigned control; /* Control reg */
unsigned reserved; /* (master only) */
- unsigned slaveselect; /* SPI slave selct mask (master only) */
+ unsigned slaveselect; /* SPI slave select mask (master only) */
}nios_spi_t;
/* status register */
diff --git a/lib_nios/board.c b/lib_nios/board.c
index 08085c2bb0..fb477e94e0 100644
--- a/lib_nios/board.c
+++ b/lib_nios/board.c
@@ -132,8 +132,10 @@ void board_init (void)
bd->bi_memstart = CFG_SDRAM_BASE;
bd->bi_memsize = CFG_SDRAM_SIZE;
bd->bi_flashstart = CFG_FLASH_BASE;
+#if defined(CFG_SRAM_BASE) && defined(CFG_SRAM_SIZE)
bd->bi_sramstart= CFG_SRAM_BASE;
bd->bi_sramsize = CFG_SRAM_SIZE;
+#endif
bd->bi_baudrate = CONFIG_BAUDRATE;
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
diff --git a/rtc/ds1306.c b/rtc/ds1306.c
index 9c11c600d6..20f1a50856 100644
--- a/rtc/ds1306.c
+++ b/rtc/ds1306.c
@@ -1,6 +1,9 @@
/*
* (C) Copyright 2002 SIXNET, dge@sixnetio.com.
*
+ * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -21,20 +24,66 @@
*/
/*
- * Date & Time support for DS1306 RTC using software SPI
+ * Date & Time support for DS1306 RTC using SPI:
+ *
+ * - SXNI855T: it uses its own soft SPI here in this file
+ * - all other: use the external spi_xfer() function
+ * (see include/spi.h)
*/
#include <common.h>
#include <command.h>
#include <rtc.h>
+#include <spi.h>
#if defined(CONFIG_RTC_DS1306) && (CONFIG_COMMANDS & CFG_CMD_DATE)
-static unsigned int bin2bcd(unsigned int n);
-static unsigned char bcd2bin(unsigned char c);
-static void soft_spi_send(unsigned char n);
-static unsigned char soft_spi_read(void);
-static void init_spi(void);
+#define RTC_SECONDS 0x00
+#define RTC_MINUTES 0x01
+#define RTC_HOURS 0x02
+#define RTC_DAY_OF_WEEK 0x03
+#define RTC_DATE_OF_MONTH 0x04
+#define RTC_MONTH 0x05
+#define RTC_YEAR 0x06
+
+#define RTC_SECONDS_ALARM0 0x07
+#define RTC_MINUTES_ALARM0 0x08
+#define RTC_HOURS_ALARM0 0x09
+#define RTC_DAY_OF_WEEK_ALARM0 0x0a
+
+#define RTC_SECONDS_ALARM1 0x0b
+#define RTC_MINUTES_ALARM1 0x0c
+#define RTC_HOURS_ALARM1 0x0d
+#define RTC_DAY_OF_WEEK_ALARM1 0x0e
+
+#define RTC_CONTROL 0x0f
+#define RTC_STATUS 0x10
+#define RTC_TRICKLE_CHARGER 0x11
+
+#define RTC_USER_RAM_BASE 0x20
+
+/*
+ * External table of chip select functions (see the appropriate board
+ * support for the actual definition of the table).
+ */
+extern spi_chipsel_type spi_chipsel[];
+extern int spi_chipsel_cnt;
+
+static unsigned int bin2bcd (unsigned int n);
+static unsigned char bcd2bin (unsigned char c);
+static unsigned char rtc_read (unsigned char reg);
+static void rtc_write (unsigned char reg, unsigned char val);
+
+
+
+
+
+/* ************************************************************************* */
+#ifdef CONFIG_SXNI855T /* !!! SHOULD BE CHANGED TO NEW CODE !!! */
+
+static void soft_spi_send (unsigned char n);
+static unsigned char soft_spi_read (void);
+static void init_spi (void);
/*-----------------------------------------------------------------------
* Definitions
@@ -48,227 +97,349 @@ static void init_spi(void);
/* ------------------------------------------------------------------------- */
/* read clock time from DS1306 and return it in *tmp */
-void rtc_get(struct rtc_time *tmp)
+void rtc_get (struct rtc_time *tmp)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- unsigned char spi_byte; /* Data Byte */
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ unsigned char spi_byte; /* Data Byte */
+
+ init_spi (); /* set port B for software SPI */
+
+ /* Now we can enable the DS1306 RTC */
+ immap->im_cpm.cp_pbdat |= PB_SPI_CE;
+ udelay (10);
+
+ /* Shift out the address (0) of the time in the Clock Chip */
+ soft_spi_send (0);
+
+ /* Put the clock readings into the rtc_time structure */
+ tmp->tm_sec = bcd2bin (soft_spi_read ()); /* Read seconds */
+ tmp->tm_min = bcd2bin (soft_spi_read ()); /* Read minutes */
+
+ /* Hours are trickier */
+ spi_byte = soft_spi_read (); /* Read Hours into temporary value */
+ if (spi_byte & 0x40) {
+ /* 12 hour mode bit is set (time is in 1-12 format) */
+ if (spi_byte & 0x20) {
+ /* since PM we add 11 to get 0-23 for hours */
+ tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) + 11;
+ } else {
+ /* since AM we subtract 1 to get 0-23 for hours */
+ tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) - 1;
+ }
+ } else {
+ /* Otherwise, 0-23 hour format */
+ tmp->tm_hour = (bcd2bin (spi_byte & 0x3F));
+ }
- init_spi(); /* set port B for software SPI */
+ soft_spi_read (); /* Read and discard Day of week */
+ tmp->tm_mday = bcd2bin (soft_spi_read ()); /* Read Day of the Month */
+ tmp->tm_mon = bcd2bin (soft_spi_read ()); /* Read Month */
- /* Now we can enable the DS1306 RTC */
- immap->im_cpm.cp_pbdat |= PB_SPI_CE;
- udelay(10);
+ /* Read Year and convert to this century */
+ tmp->tm_year = bcd2bin (soft_spi_read ()) + 2000;
- /* Shift out the address (0) of the time in the Clock Chip */
- soft_spi_send(0);
+ /* Now we can disable the DS1306 RTC */
+ immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
+ udelay (10);
- /* Put the clock readings into the rtc_time structure */
- tmp->tm_sec = bcd2bin(soft_spi_read()); /* Read seconds */
- tmp->tm_min = bcd2bin(soft_spi_read()); /* Read minutes */
+ GregorianDay (tmp); /* Determine the day of week */
- /* Hours are trickier */
- spi_byte = soft_spi_read(); /* Read Hours into temporary value */
- if (spi_byte & 0x40) {
- /* 12 hour mode bit is set (time is in 1-12 format) */
- if (spi_byte & 0x20) {
- /* since PM we add 11 to get 0-23 for hours */
- tmp->tm_hour = (bcd2bin(spi_byte & 0x1F)) + 11;
- }
- else {
- /* since AM we subtract 1 to get 0-23 for hours */
- tmp->tm_hour = (bcd2bin(spi_byte & 0x1F)) - 1;
+ debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* set clock time in DS1306 RTC and in MPC8xx RTC */
+void rtc_set (struct rtc_time *tmp)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+ init_spi (); /* set port B for software SPI */
+
+ /* Now we can enable the DS1306 RTC */
+ immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */
+ udelay (10);
+
+ /* First disable write protect in the clock chip control register */
+ soft_spi_send (0x8F); /* send address of the control register */
+ soft_spi_send (0x00); /* send control register contents */
+
+ /* Now disable the DS1306 to terminate the write */
+ immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;
+ udelay (10);
+
+ /* Now enable the DS1306 to initiate a new write */
+ immap->im_cpm.cp_pbdat |= PB_SPI_CE;
+ udelay (10);
+
+ /* Next, send the address of the clock time write registers */
+ soft_spi_send (0x80); /* send address of the first time register */
+
+ /* Use Burst Mode to send all of the time data to the clock */
+ bin2bcd (tmp->tm_sec);
+ soft_spi_send (bin2bcd (tmp->tm_sec)); /* Send Seconds */
+ soft_spi_send (bin2bcd (tmp->tm_min)); /* Send Minutes */
+ soft_spi_send (bin2bcd (tmp->tm_hour)); /* Send Hour */
+ soft_spi_send (bin2bcd (tmp->tm_wday)); /* Send Day of the Week */
+ soft_spi_send (bin2bcd (tmp->tm_mday)); /* Send Day of Month */
+ soft_spi_send (bin2bcd (tmp->tm_mon)); /* Send Month */
+ soft_spi_send (bin2bcd (tmp->tm_year - 2000)); /* Send Year */
+
+ /* Now we can disable the Clock chip to terminate the burst write */
+ immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
+ udelay (10);
+
+ /* Now we can enable the Clock chip to initiate a new write */
+ immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */
+ udelay (10);
+
+ /* First we Enable write protect in the clock chip control register */
+ soft_spi_send (0x8F); /* send address of the control register */
+ soft_spi_send (0x40); /* send out Control Register contents */
+
+ /* Now disable the DS1306 */
+ immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
+ udelay (10);
+
+ /* Set standard MPC8xx clock to the same time so Linux will
+ * see the time even if it doesn't have a DS1306 clock driver.
+ * This helps with experimenting with standard kernels.
+ */
+ {
+ ulong tim;
+
+ tim = mktime (tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ immap->im_sitk.sitk_rtck = KAPWR_KEY;
+ immap->im_sit.sit_rtc = tim;
}
- }
- else {
- /* Otherwise, 0-23 hour format */
- tmp->tm_hour = (bcd2bin(spi_byte & 0x3F));
- }
- soft_spi_read(); /* Read and discard Day of week */
- tmp->tm_mday = bcd2bin(soft_spi_read()); /* Read Day of the Month */
- tmp->tm_mon = bcd2bin(soft_spi_read()); /* Read Month */
+ debug ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+}
- /* Read Year and convert to this century */
- tmp->tm_year = bcd2bin(soft_spi_read()) + 2000;
+/* ------------------------------------------------------------------------- */
- /* Now we can disable the DS1306 RTC */
- immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
- udelay(10);
+/* Initialize Port B for software SPI */
+static void init_spi (void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
- GregorianDay(tmp); /* Determine the day of week */
+ /* Force output pins to begin at logic 0 */
+ immap->im_cpm.cp_pbdat &= ~(PB_SPI_CE | PB_SPIMOSI | PB_SPISCK);
- debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+ /* Set these 3 signals as outputs */
+ immap->im_cpm.cp_pbdir |= (PB_SPIMOSI | PB_SPI_CE | PB_SPISCK);
+
+ immap->im_cpm.cp_pbdir &= ~PB_SPIMISO; /* Make MISO pin an input */
+ udelay (10);
}
/* ------------------------------------------------------------------------- */
-/* set clock time in DS1306 RTC and in MPC8xx RTC */
-void rtc_set(struct rtc_time *tmp)
+/* NOTE: soft_spi_send() assumes that the I/O lines are configured already */
+static void soft_spi_send (unsigned char n)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
-
- init_spi(); /* set port B for software SPI */
-
- /* Now we can enable the DS1306 RTC */
- immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */
- udelay(10);
-
- /* First disable write protect in the clock chip control register */
- soft_spi_send(0x8F); /* send address of the control register */
- soft_spi_send(0x00); /* send control register contents */
-
- /* Now disable the DS1306 to terminate the write */
- immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;
- udelay(10);
-
- /* Now enable the DS1306 to initiate a new write */
- immap->im_cpm.cp_pbdat |= PB_SPI_CE;
- udelay(10);
-
- /* Next, send the address of the clock time write registers */
- soft_spi_send(0x80); /* send address of the first time register */
-
- /* Use Burst Mode to send all of the time data to the clock */
- bin2bcd(tmp->tm_sec);
- soft_spi_send(bin2bcd(tmp->tm_sec)); /* Send Seconds */
- soft_spi_send(bin2bcd(tmp->tm_min)); /* Send Minutes */
- soft_spi_send(bin2bcd(tmp->tm_hour)); /* Send Hour */
- soft_spi_send(bin2bcd(tmp->tm_wday)); /* Send Day of the Week */
- soft_spi_send(bin2bcd(tmp->tm_mday)); /* Send Day of Month */
- soft_spi_send(bin2bcd(tmp->tm_mon)); /* Send Month */
- soft_spi_send(bin2bcd(tmp->tm_year - 2000)); /* Send Year */
-
- /* Now we can disable the Clock chip to terminate the burst write */
- immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
- udelay(10);
-
- /* Now we can enable the Clock chip to initiate a new write */
- immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */
- udelay(10);
-
- /* First we Enable write protect in the clock chip control register */
- soft_spi_send(0x8F); /* send address of the control register */
- soft_spi_send(0x40); /* send out Control Register contents */
-
- /* Now disable the DS1306 */
- immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
- udelay(10);
-
- /* Set standard MPC8xx clock to the same time so Linux will
- * see the time even if it doesn't have a DS1306 clock driver.
- * This helps with experimenting with standard kernels.
- */
- {
- ulong tim;
-
- tim = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
- immap->im_sitk.sitk_rtck = KAPWR_KEY;
- immap->im_sit.sit_rtc = tim;
- }
-
- debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ unsigned char bitpos; /* bit position to receive */
+ unsigned char i; /* Loop Control */
+
+ /* bit position to send, start with most significant bit */
+ bitpos = 0x80;
+
+ /* Send 8 bits to software SPI */
+ for (i = 0; i < 8; i++) { /* Loop for 8 bits */
+ immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */
+
+ if (n & bitpos)
+ immap->im_cpm.cp_pbdat |= PB_SPIMOSI; /* Set MOSI to 1 */
+ else
+ immap->im_cpm.cp_pbdat &= ~PB_SPIMOSI; /* Set MOSI to 0 */
+ udelay (10);
+
+ immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */
+ udelay (10);
+
+ bitpos >>= 1; /* Shift for next bit position */
+ }
}
/* ------------------------------------------------------------------------- */
-void rtc_reset(void)
+/* NOTE: soft_spi_read() assumes that the I/O lines are configured already */
+static unsigned char soft_spi_read (void)
{
- return; /* nothing to do */
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+ unsigned char spi_byte = 0; /* Return value, assume success */
+ unsigned char bitpos; /* bit position to receive */
+ unsigned char i; /* Loop Control */
+
+ /* bit position to receive, start with most significant bit */
+ bitpos = 0x80;
+
+ /* Read 8 bits here */
+ for (i = 0; i < 8; i++) { /* Do 8 bits in loop */
+ immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */
+ udelay (10);
+ if (immap->im_cpm.cp_pbdat & PB_SPIMISO) /* Get a bit of data */
+ spi_byte |= bitpos; /* Set data accordingly */
+ immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */
+ udelay (10);
+ bitpos >>= 1; /* Shift for next bit position */
+ }
+
+ return spi_byte; /* Return the byte read */
}
/* ------------------------------------------------------------------------- */
-static unsigned char bcd2bin(unsigned char n)
+void rtc_reset (void)
{
- return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
+ return; /* nothing to do */
+}
+
+#else /* not CONFIG_SXNI855T */
+/* ************************************************************************* */
+
+
+
+
+
+/* read clock time from DS1306 and return it in *tmp */
+void rtc_get (struct rtc_time *tmp)
+{
+ unsigned char sec, min, hour, mday, wday, mon, year;
+
+ sec = rtc_read (RTC_SECONDS);
+ min = rtc_read (RTC_MINUTES);
+ hour = rtc_read (RTC_HOURS);
+ mday = rtc_read (RTC_DATE_OF_MONTH);
+ wday = rtc_read (RTC_DAY_OF_WEEK);
+ mon = rtc_read (RTC_MONTH);
+ year = rtc_read (RTC_YEAR);
+
+ debug ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
+ "hr: %02x min: %02x sec: %02x\n",
+ year, mon, mday, wday, hour, min, sec);
+ debug ("Alarms[0]: wday: %02x hour: %02x min: %02x sec: %02x\n",
+ rtc_read (RTC_DAY_OF_WEEK_ALARM0),
+ rtc_read (RTC_HOURS_ALARM0),
+ rtc_read (RTC_MINUTES_ALARM0), rtc_read (RTC_SECONDS_ALARM0));
+ debug ("Alarms[1]: wday: %02x hour: %02x min: %02x sec: %02x\n",
+ rtc_read (RTC_DAY_OF_WEEK_ALARM1),
+ rtc_read (RTC_HOURS_ALARM1),
+ rtc_read (RTC_MINUTES_ALARM1), rtc_read (RTC_SECONDS_ALARM1));
+
+ tmp->tm_sec = bcd2bin (sec & 0x7F); /* convert Seconds */
+ tmp->tm_min = bcd2bin (min & 0x7F); /* convert Minutes */
+
+ /* convert Hours */
+ tmp->tm_hour = (hour & 0x40)
+ ? ((hour & 0x20) /* 12 hour mode */
+ ? bcd2bin (hour & 0x1F) + 11 /* PM */
+ : bcd2bin (hour & 0x1F) - 1 /* AM */
+ )
+ : bcd2bin (hour & 0x3F); /* 24 hour mode */
+
+ tmp->tm_mday = bcd2bin (mday & 0x3F); /* convert Day of the Month */
+ tmp->tm_mon = bcd2bin (mon & 0x1F); /* convert Month */
+ tmp->tm_year = bcd2bin (year) + 2000; /* convert Year */
+ tmp->tm_wday = bcd2bin (wday & 0x07) - 1; /* convert Day of the Week */
+ tmp->tm_yday = 0;
+ tmp->tm_isdst = 0;
+
+ debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
}
/* ------------------------------------------------------------------------- */
-static unsigned int bin2bcd(unsigned int n)
+/* set clock time from *tmp in DS1306 RTC */
+void rtc_set (struct rtc_time *tmp)
{
- return (((n / 10) << 4) | (n % 10));
+ debug ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ rtc_write (RTC_YEAR, bin2bcd (tmp->tm_year - 2000));
+ rtc_write (RTC_MONTH, bin2bcd (tmp->tm_mon));
+ rtc_write (RTC_DATE_OF_MONTH, bin2bcd (tmp->tm_mday));
+ rtc_write (RTC_DAY_OF_WEEK, bin2bcd (tmp->tm_wday + 1));
+ rtc_write (RTC_HOURS, bin2bcd (tmp->tm_hour));
+ rtc_write (RTC_MINUTES, bin2bcd (tmp->tm_min));
+ rtc_write (RTC_SECONDS, bin2bcd (tmp->tm_sec));
}
/* ------------------------------------------------------------------------- */
-/* Initialize Port B for software SPI */
-static void init_spi(void) {
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+/* reset the DS1306 */
+void rtc_reset (void)
+{
+ /* clear the control register */
+ rtc_write (RTC_CONTROL, 0x00); /* 1st step: reset WP */
+ rtc_write (RTC_CONTROL, 0x00); /* 2nd step: reset 1Hz, AIE1, AIE0 */
+
+ /* reset all alarms */
+ rtc_write (RTC_SECONDS_ALARM0, 0x00);
+ rtc_write (RTC_SECONDS_ALARM1, 0x00);
+ rtc_write (RTC_MINUTES_ALARM0, 0x00);
+ rtc_write (RTC_MINUTES_ALARM1, 0x00);
+ rtc_write (RTC_HOURS_ALARM0, 0x00);
+ rtc_write (RTC_HOURS_ALARM1, 0x00);
+ rtc_write (RTC_DAY_OF_WEEK_ALARM0, 0x00);
+ rtc_write (RTC_DAY_OF_WEEK_ALARM1, 0x00);
+}
+
+/* ------------------------------------------------------------------------- */
- /* Force output pins to begin at logic 0 */
- immap->im_cpm.cp_pbdat &= ~(PB_SPI_CE | PB_SPIMOSI | PB_SPISCK);
+static unsigned char rtc_read (unsigned char reg)
+{
+ unsigned char dout[2]; /* SPI Output Data Bytes */
+ unsigned char din[2]; /* SPI Input Data Bytes */
- /* Set these 3 signals as outputs */
- immap->im_cpm.cp_pbdir |= (PB_SPIMOSI | PB_SPI_CE | PB_SPISCK);
+ dout[0] = reg;
- immap->im_cpm.cp_pbdir &= ~PB_SPIMISO; /* Make MISO pin an input */
- udelay(10);
+ if (spi_xfer (spi_chipsel[CFG_SPI_RTC_DEVID], 16, dout, din) != 0) {
+ return 0;
+ } else {
+ return din[1];
+ }
}
/* ------------------------------------------------------------------------- */
-/* NOTE: soft_spi_send() assumes that the I/O lines are configured already */
-static void soft_spi_send(unsigned char n)
+static void rtc_write (unsigned char reg, unsigned char val)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- unsigned char bitpos; /* bit position to receive */
- unsigned char i; /* Loop Control */
+ unsigned char dout[2]; /* SPI Output Data Bytes */
+ unsigned char din[2]; /* SPI Input Data Bytes */
- /* bit position to send, start with most significant bit */
- bitpos = 0x80;
+ dout[0] = 0x80 | reg;
+ dout[1] = val;
- /* Send 8 bits to software SPI */
- for (i = 0; i < 8; i++) { /* Loop for 8 bits */
- immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */
+ spi_xfer (spi_chipsel[CFG_SPI_RTC_DEVID], 16, dout, din);
+}
- if (n & bitpos)
- immap->im_cpm.cp_pbdat |= PB_SPIMOSI; /* Set MOSI to 1 */
- else
- immap->im_cpm.cp_pbdat &= ~PB_SPIMOSI; /* Set MOSI to 0 */
- udelay(10);
+#endif /* end of code exclusion (see #ifdef CONFIG_SXNI855T above) */
- immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */
- udelay(10);
+/* ------------------------------------------------------------------------- */
- bitpos >>= 1; /* Shift for next bit position */
- }
+static unsigned char bcd2bin (unsigned char n)
+{
+ return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
}
/* ------------------------------------------------------------------------- */
-/* NOTE: soft_spi_read() assumes that the I/O lines are configured already */
-static unsigned char soft_spi_read(void)
+static unsigned int bin2bcd (unsigned int n)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
-
- unsigned char spi_byte = 0; /* Return value, assume success */
- unsigned char bitpos; /* bit position to receive */
- unsigned char i; /* Loop Control */
-
- /* bit position to receive, start with most significant bit */
- bitpos = 0x80;
-
- /* Read 8 bits here */
- for (i = 0; i < 8; i++) { /* Do 8 bits in loop */
- immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */
- udelay(10);
- if (immap->im_cpm.cp_pbdat & PB_SPIMISO) /* Get a bit of data */
- spi_byte |= bitpos; /* Set data accordingly */
- immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */
- udelay(10);
- bitpos >>= 1; /* Shift for next bit position */
- }
-
- return spi_byte; /* Return the byte read */
+ return (((n / 10) << 4) | (n % 10));
}
-
/* ------------------------------------------------------------------------- */
#endif