summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorEran Liberty <liberty@freescale.com>2005-07-28 10:08:46 -0500
committerJon Loeliger <jdl@freescale.com>2005-07-28 10:08:46 -0500
commitf046ccd15c8bc9613bfd72916b761a127d36e5c6 (patch)
tree40b48bdc1fff75c661cab5c4806a322a67e9dc44 /include
parent63be111e72371b6edc6d02134dd785abb6be188c (diff)
* Patch by Eran Liberty
Add support for the Freescale MPC8349ADS board.
Diffstat (limited to 'include')
-rw-r--r--include/asm-ppc/e300.h128
-rw-r--r--include/asm-ppc/global_data.h17
-rw-r--r--include/asm-ppc/i2c.h104
-rw-r--r--include/asm-ppc/immap_83xx.h1032
-rw-r--r--include/asm-ppc/mpc8349_pci.h167
-rw-r--r--include/asm-ppc/processor.h11
-rw-r--r--include/asm-ppc/u-boot.h3
-rw-r--r--include/common.h9
-rw-r--r--include/configs/MPC8349ADS.h609
-rw-r--r--include/mpc83xx.h289
10 files changed, 2364 insertions, 5 deletions
diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
new file mode 100644
index 0000000000..3096a26a11
--- /dev/null
+++ b/include/asm-ppc/e300.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ * Liberty Eran (liberty@freescale.com)
+ */
+
+#ifndef __E300_H__
+#define __E300_H__
+
+/*
+ * e300 Processor Version & Revision Numbers
+ */
+#define PVR_83xx 0x80830000
+#define PVR_8349_REV10 (PVR_83xx | 0x0010)
+#define PVR_8349_REV11 (PVR_83xx | 0x0011)
+
+/*
+ * Hardware Implementation-Dependent Register 0 (HID0)
+ */
+
+/* #define HID0 1008 already defined in processor.h */
+#define HID0_MASK_MACHINE_CHECK 0x00000000
+#define HID0_ENABLE_MACHINE_CHECK 0x80000000
+
+#define HID0_DISABLE_CACHE_PARITY 0x00000000
+#define HID0_ENABLE_CACHE_PARITY 0x40000000
+
+#define HID0_DISABLE_ADDRESS_PARITY 0x00000000 /* on mpc8349ads must be disabled */
+#define HID0_ENABLE_ADDRESS_PARITY 0x20000000
+
+#define HID0_DISABLE_DATA_PARITY 0x00000000 /* on mpc8349ads must be disabled */
+#define HID0_ENABLE_DATE_PARITY 0x10000000
+
+#define HID0_CORE_CLK_OUT 0x00000000
+#define HID0_CORE_CLK_OUT_DIV_2 0x08000000
+
+#define HID0_ENABLE_ARTRY_OUT_PRECHARGE 0x00000000 /* on mpc8349ads must be enabled */
+#define HID0_DISABLE_ARTRY_OUT_PRECHARGE 0x01000000
+
+#define HID0_DISABLE_DOSE_MODE 0x00000000
+#define HID0_ENABLE_DOSE_MODE 0x00800000
+
+#define HID0_DISABLE_NAP_MODE 0x00000000
+#define HID0_ENABLE_NAP_MODE 0x00400000
+
+#define HID0_DISABLE_SLEEP_MODE 0x00000000
+#define HID0_ENABLE_SLEEP_MODE 0x00200000
+
+#define HID0_DISABLE_DYNAMIC_POWER_MANAGMENT 0x00000000
+#define HID0_ENABLE_DYNAMIC_POWER_MANAGMENT 0x00100000
+
+#define HID0_SOFT_RESET 0x00010000
+
+#define HID0_DISABLE_INSTRUCTION_CACHE 0x00000000
+#define HID0_ENABLE_INSTRUCTION_CACHE 0x00008000
+
+#define HID0_DISABLE_DATA_CACHE 0x00000000
+#define HID0_ENABLE_DATA_CACHE 0x00004000
+
+#define HID0_LOCK_INSTRUCTION_CACHE 0x00002000
+
+#define HID0_LOCK_DATA_CACHE 0x00001000
+
+#define HID0_INVALIDATE_INSTRUCTION_CACHE 0x00000800
+
+#define HID0_INVALIDATE_DATA_CACHE 0x00000400
+
+#define HID0_DISABLE_M_BIT 0x00000000
+#define HID0_ENABLE_M_BIT 0x00000080
+
+#define HID0_FBIOB 0x00000010
+
+#define HID0_DISABLE_ADDRESS_BROADCAST 0x00000000
+#define HID0_ENABLE_ADDRESS_BROADCAST 0x00000008
+
+#define HID0_ENABLE_NOOP_DCACHE_INSTRUCTION 0x00000000
+#define HID0_DISABLE_NOOP_DCACHE_INSTRUCTION 0x00000001
+
+/*
+ * Hardware Implementation-Dependent Register 2 (HID2)
+ */
+#define HID2 1011
+
+#define HID2_LET 0x08000000
+#define HID2_HBE 0x00040000
+#define HID2_IWLCK_000 0x00000000 /* no ways locked */
+#define HID2_IWLCK_001 0x00002000 /* way 0 locked */
+#define HID2_IWLCK_010 0x00004000 /* way 0 through way 1 locked */
+#define HID2_IWLCK_011 0x00006000 /* way 0 through way 2 locked */
+#define HID2_IWLCK_100 0x00008000 /* way 0 through way 3 locked */
+#define HID2_IWLCK_101 0x0000A000 /* way 0 through way 4 locked */
+#define HID2_IWLCK_110 0x0000C000 /* way 0 through way 5 locked */
+
+
+/* BAT (block address translation */
+#define BATU_BEPI_MSK 0xfffe0000
+#define BATU_BL_MSK 0x00001ffc
+
+#define BATU_BL_128K 0x00000000
+#define BATU_BL_256K 0x00000004
+#define BATU_BL_512K 0x0000000c
+#define BATU_BL_1M 0x0000001c
+#define BATU_BL_2M 0x0000003c
+#define BATU_BL_4M 0x0000007c
+#define BATU_BL_8M 0x000000fc
+#define BATU_BL_16M 0x000001fc
+#define BATU_BL_32M 0x000003fc
+#define BATU_BL_64M 0x000007fc
+#define BATU_BL_128M 0x00000ffc
+#define BATU_BL_256M 0x00001ffc
+
+#define BATU_VS 0x00000002
+#define BATU_VP 0x00000001
+
+#define BATL_BRPN_MSK 0xfffe0000
+#define BATL_WIMG_MSK 0x00000078
+
+#define BATL_WRITETHROUGH 0x00000040
+#define BATL_CACHEINHIBIT 0x00000020
+#define BATL_MEMCOHERENCE 0x00000010
+#define BATL_GUARDEDSTORAGE 0x00000008
+
+#define BATL_PP_MSK 0x00000003
+#define BATL_PP_00 0x00000000 /* No access */
+#define BATL_PP_01 0x00000001 /* Read-only */
+#define BATL_PP_10 0x00000002 /* Read-write */
+#define BATL_PP_11 0x00000003
+
+#endif /* __E300_H__ */
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index 2b57a8bf14..9681a74b55 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -23,6 +23,9 @@
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
+
+#include "asm/types.h"
+
/*
* The following data structure is placed in some memory wich is
* available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
@@ -46,6 +49,20 @@ typedef struct global_data {
unsigned long scc_clk;
unsigned long brg_clk;
#endif
+#if defined(CONFIG_MPC83XX)
+ /* There are other clocks in the MPC83XX */
+ u32 csb_clk;
+ u32 tsec1_clk;
+ u32 tsec2_clk;
+ u32 core_clk;
+ u32 usbmph_clk;
+ u32 usbdr_clk;
+ u32 i2c_clk;
+ u32 enc_clk;
+ u32 lbiu_clk;
+ u32 lclk_clk;
+ u32 ddr_clk;
+#endif
#if defined(CONFIG_MPC5xxx)
unsigned long ipb_clk;
unsigned long pci_clk;
diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h
new file mode 100644
index 0000000000..e7ec9aa6b5
--- /dev/null
+++ b/include/asm-ppc/i2c.h
@@ -0,0 +1,104 @@
+/*
+ * Freescale I2C Controller
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2004 Freescale Semiconductor.
+ * (C) Copyright 2003, Motorola, Inc.
+ * author: Eran Liberty (liberty@freescale.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_I2C_H_
+#define _ASM_I2C_H_
+
+#include <asm/types.h>
+
+typedef struct i2c
+{
+ u8 adr; /**< I2C slave address */
+#define I2C_ADR 0xFE
+#define I2C_ADR_SHIFT 1
+#define I2C_ADR_RES ~(I2C_ADR)
+ u8 res0[3];
+ u8 fdr; /**< I2C frequency divider register */
+
+#define IC2_FDR 0x3F
+#define IC2_FDR_SHIFT 0
+#define IC2_FDR_RES ~(IC2_FDR)
+ u8 res1[3];
+ u8 cr; /**< I2C control redister */
+#define I2C_CR_MEN 0x80
+#define I2C_CR_MIEN 0x40
+#define I2C_CR_MSTA 0x20
+#define I2C_CR_MTX 0x10
+#define I2C_CR_TXAK 0x08
+#define I2C_CR_RSTA 0x04
+#define I2C_CR_BCST 0x01
+ u8 res2[3];
+ u8 sr; /**< I2C status register */
+#define I2C_SR_MCF 0x80
+#define I2C_SR_MAAS 0x40
+#define I2C_SR_MBB 0x20
+#define I2C_SR_MAL 0x10
+#define I2C_SR_BCSTM 0x08
+#define I2C_SR_SRW 0x04
+#define I2C_SR_MIF 0x02
+#define I2C_SR_RXAK 0x01
+ u8 res3[3];
+ u8 dr; /**< I2C data register */
+#define I2C_DR 0xFF
+#define I2C_DR_SHIFT 0
+#define I2C_DR_RES ~(I2C_DR)
+ u8 res4[3];
+ u8 dfsrr; /**< I2C digital filter sampling rate register */
+#define I2C_DFSRR 0x3F
+#define I2C_DFSRR_SHIFT 0
+#define I2C_DFSRR_RES ~(I2C_DR)
+ u8 res5[3];
+ u8 res6[0xE8];
+} i2c_t;
+
+#ifndef CFG_HZ
+#error CFG_HZ is not defined in /include/configs/${BOARD}.h
+#endif
+#define I2C_TIMEOUT (CFG_HZ/4)
+
+#ifndef CFG_IMMRBAR
+#error CFG_IMMRBAR is not defined in /include/configs/${BOARD}.h
+#endif
+
+#ifndef CFG_I2C_OFFSET
+#error CFG_I2C_OFFSET is not defined in /include/configs/${BOARD}.h
+#endif
+
+#ifdef CONFIG_MPC8349ADS
+/*
+ * MPC8349 have two i2c bus
+ */
+extern i2c_t * mpc8349_i2c;
+#define I2C mpc8349_i2c
+#else
+#define I2C ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET))
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#endif /* _ASM_I2C_H_ */
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
new file mode 100644
index 0000000000..e894cda646
--- /dev/null
+++ b/include/asm-ppc/immap_83xx.h
@@ -0,0 +1,1032 @@
+/*
+ * MPC8349 Internal Memory Map
+ * Copyright (c) 2004 Freescale Semiconductor.
+ * Eran Liberty (liberty@freescale.com)
+ *
+ * based on:
+ * - MPC8260 Internal Memory Map
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ * - MPC85xx Internal Memory Map
+ * Copyright(c) 2002,2003 Motorola Inc.
+ * Xianghua Xiao (x.xiao@motorola.com)
+ */
+#ifndef __IMMAP_8349__
+#define __IMMAP_8349__
+
+#include <asm/types.h>
+#include <asm/i2c.h>
+
+/*
+ * Local Access Window.
+ */
+typedef struct law8349 {
+ u32 bar; /* LBIU local access window base address register */
+#define LAWBAR_BAR 0xFFFFF000 /* Identifies the 20 most-significant address bits of the base of local access window n. The specified base address should be aligned to the window size, as defined by LBLAWARn[SIZE]. */
+#define LAWBAR_RES ~(LAWBAR_BAR)
+ u32 ar; /* LBIU local access window attribute register */
+/*
+ * This Macro were moved into mmu.h
+ */
+#if 0
+#define LAWAR_EN 0x80000000 /* 0 The local bus local access window n is disabled. 1 The local bus local access window n is enabled and other LBLAWAR0 and LBLAWBAR0 fields combine to identify an address range for this window. */
+#define LAWAR_SIZE 0x0000003F /* Identifies the size of the window from the starting address. Window size is 2^(SIZE+1) bytes. 000000–001010Reserved. Window is undefined. */
+#define LAWAR_SIZE_4K 0x0000000B
+#define LAWAR_SIZE_8K 0x0000000C
+#define LAWAR_SIZE_16K 0x0000000D
+#define LAWAR_SIZE_32K 0x0000000E
+#define LAWAR_SIZE_64K 0x0000000F
+#define LAWAR_SIZE_128K 0x00000010
+#define LAWAR_SIZE_256K 0x00000011
+#define LAWAR_SIZE_512K 0x00000012
+#define LAWAR_SIZE_1M 0x00000013
+#define LAWAR_SIZE_2M 0x00000014
+#define LAWAR_SIZE_4M 0x00000015
+#define LAWAR_SIZE_8M 0x00000016
+#define LAWAR_SIZE_16M 0x00000017
+#define LAWAR_SIZE_32M 0x00000018
+#define LAWAR_SIZE_64M 0x00000019
+#define LAWAR_SIZE_128M 0x0000001A
+#define LAWAR_SIZE_256M 0x0000001B
+#define LAWAR_SIZE_512M 0x0000001C
+#define LAWAR_SIZE_1G 0x0000001D
+#define LAWAR_SIZE_2G 0x0000001E
+#define LAWAR_RES ~(LAWAR_EN|LAWAR_SIZE)
+#endif
+
+} law8349_t;
+
+/*
+ * System configuration registers.
+ */
+typedef struct sysconf8349 {
+ u32 immrbar; /* Internal memory map base address register */
+ u8 res0[0x04];
+ u32 altcbar; /* Alternate configuration base address register */
+#define ALTCBAR_BASE_ADDR 0xFFF00000 /* Identifies the12 most significant address bits of an alternate base address used for boot sequencer configuration accesses. */
+#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */
+ u8 res1[0x14];
+ law8349_t lblaw[4]; /* LBIU local access window */
+ u8 res2[0x20];
+ law8349_t pcilaw[2]; /* PCI local access window */
+ u8 res3[0x30];
+ law8349_t ddrlaw[2]; /* DDR local access window */
+ u8 res4[0x50];
+ u32 sgprl; /* System General Purpose Register Low */
+ u32 sgprh; /* System General Purpose Register High */
+ u32 spridr; /* System Part and Revision ID Register */
+#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */
+#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */
+ u8 res5[0x04];
+ u32 spcr; /* System Priority Configuration Register */
+#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */
+#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */
+#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */
+#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */
+#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */
+#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */
+#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */
+#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */
+#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */
+#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */
+#define SPCR_RES ~(SPCR_PCIHPE|SPCR_PCIPR|SPCR_TBEN|SPCR_COREPR|SPCR_TSEC1DP \
+ |SPCR_TSEC1BDP|SPCR_TSEC1EP|SPCR_TSEC2DP|SPCR_TSEC2BDP|SPCR_TSEC2EP)
+ u32 sicrl; /* System General Purpose Register Low */
+#define SICRL_LDP_A 0x80000000
+#define SICRL_USB0 0x40000000
+#define SICRL_USB1 0x20000000
+#define SICRL_UART 0x0C000000
+#define SICRL_GPIO1_A 0x02000000
+#define SICRL_GPIO1_B 0x01000000
+#define SICRL_GPIO1_C 0x00800000
+#define SICRL_GPIO1_D 0x00400000
+#define SICRL_GPIO1_E 0x00200000
+#define SICRL_GPIO1_F 0x00180000
+#define SICRL_GPIO1_G 0x00040000
+#define SICRL_GPIO1_H 0x00020000
+#define SICRL_GPIO1_I 0x00010000
+#define SICRL_GPIO1_J 0x00008000
+#define SICRL_GPIO1_K 0x00004000
+#define SICRL_GPIO1_L 0x00003000
+#define SICRL_RES ~(SICRL_LDP_A|SICRL_USB0|SICRL_USB1|SICRL_UART|SICRL_GPIO1_A \
+ |SICRL_GPIO1_B|SICRL_GPIO1_C|SICRL_GPIO1_D|SICRL_GPIO1_E \
+ |SICRL_GPIO1_F|SICRL_GPIO1_G|SICRL_GPIO1_H|SICRL_GPIO1_I \
+ |SICRL_GPIO1_J|SICRL_GPIO1_K|SICRL_GPIO1_L )
+ u32 sicrh; /* System General Purpose Register High */
+#define SICRH_DDR 0x80000000
+#define SICRH_TSEC1_A 0x10000000
+#define SICRH_TSEC1_B 0x08000000
+#define SICRH_TSEC1_C 0x04000000
+#define SICRH_TSEC1_D 0x02000000
+#define SICRH_TSEC1_E 0x01000000
+#define SICRH_TSEC1_F 0x00800000
+#define SICRH_TSEC2_A 0x00400000
+#define SICRH_TSEC2_B 0x00200000
+#define SICRH_TSEC2_C 0x00100000
+#define SICRH_TSEC2_D 0x00080000
+#define SICRH_TSEC2_E 0x00040000
+#define SICRH_TSEC2_F 0x00020000
+#define SICRH_TSEC2_G 0x00010000
+#define SICRH_TSEC2_H 0x00008000
+#define SICRH_GPIO2_A 0x00004000
+#define SICRH_GPIO2_B 0x00002000
+#define SICRH_GPIO2_C 0x00001000
+#define SICRH_GPIO2_D 0x00000800
+#define SICRH_GPIO2_E 0x00000400
+#define SICRH_GPIO2_F 0x00000200
+#define SICRH_GPIO2_G 0x00000180
+#define SICRH_GPIO2_H 0x00000060
+#define SICRH_TSOBI1 0x00000002
+#define SICRH_TSOBI2 0x00000001
+#define SICRh_RES ~(SICRH_DDR|SICRH_TSEC1_A|SICRH_TSEC1_B|SICRH_TSEC1_C \
+ |SICRH_TSEC1_D|SICRH_TSEC1_E|SICRH_TSEC1_F|SICRH_TSEC2_A \
+ |SICRH_TSEC2_B|SICRH_TSEC2_C|SICRH_TSEC2_D|SICRH_TSEC2_E \
+ |SICRH_TSEC2_F|SICRH_TSEC2_G|SICRH_TSEC2_H|SICRH_GPIO2_A \
+ |SICRH_GPIO2_B|SICRH_GPIO2_C|SICRH_GPIO2_D|SICRH_GPIO2_E \
+ |SICRH_GPIO2_F|SICRH_GPIO2_G|SICRH_GPIO2_H|SICRH_TSOBI1 \
+ |SICRH_TSOBI2)
+ u8 res6[0xE4];
+} sysconf8349_t;
+
+/*
+ * Watch Dog Timer (WDT) Registers
+ */
+typedef struct wdt8349 {
+ u8 res0[4];
+ u32 swcrr; /* System watchdog control register */
+ u32 swcnr; /* System watchdog count register */
+#define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field.
+#define SWCNR_RES ~(SWCNR_SWCN)
+ u8 res1[2];
+ u16 swsrr; /* System watchdog service register */
+ u8 res2[0xF0];
+} wdt8349_t;
+
+/*
+ * RTC/PIT Module Registers
+ */
+typedef struct rtclk8349 {
+ u32 cnr; /* control register */
+#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */
+#define CNR_CLIN 0x00000040 /* Input Clock Control Bit */
+#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */
+#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */
+#define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM)
+ u32 ldr; /* load register */
+ u32 psr; /* prescale register */
+ u32 ctr; /* register */
+ u32 evr; /* event register */
+#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */
+#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */
+#define RTEVR_RES ~(EVR_SIF | EVR_AIF)
+ u32 alr; /* alarm register */
+ u8 res0[0xE8];
+} rtclk8349_t;
+
+/*
+ * Global timper module
+ */
+
+typedef struct gtm8349 {
+ u8 cfr1; /* Timer1/2 Configuration */
+#define CFR1_PCAS 0x80 /* Pair Cascade mode */
+#define CFR1_BCM 0x40 /* Backward compatible mode */
+#define CFR1_STP2 0x20 /* Stop timer */
+#define CFR1_RST2 0x10 /* Reset timer */
+#define CFR1_GM2 0x08 /* Gate mode for pin 2 */
+#define CFR1_GM1 0x04 /* Gate mode for pin 1 */
+#define CFR1_STP1 0x02 /* Stop timer */
+#define CFR1_RST1 0x01 /* Reset timer */
+ u8 res0[3];
+ u8 cfr2; /* Timer3/4 Configuration */
+#define CFR2_PCAS 0x80 /* Pair Cascade mode */
+#define CFR2_SCAS 0x40 /* Super Cascade mode */
+#define CFR2_STP4 0x20 /* Stop timer */
+#define CFR2_RST4 0x10 /* Reset timer */
+#define CFR2_GM4 0x08 /* Gate mode for pin 4 */
+#define CFR2_GM3 0x04 /* Gate mode for pin 3 */
+#define CFR2_STP3 0x02 /* Stop timer */
+#define CFR2_RST3 0x01 /* Reset timer */
+ u8 res1[10];
+ u16 mdr1; /* Timer1 Mode Register */
+#define MDR_SPS 0xff00 /* Secondary Prescaler value */
+#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */
+#define MDR_OM 0x0020 /* Output mode */
+#define MDR_ORI 0x0010 /* Output reference interrupt enable */
+#define MDR_FRR 0x0008 /* Free run/restart */
+#define MDR_ICLK 0x0006 /* Input clock source for the timer */
+#define MDR_GE 0x0001 /* Gate enable */
+ u16 mdr2; /* Timer2 Mode Register */
+ u16 rfr1; /* Timer1 Reference Register */
+ u16 rfr2; /* Timer2 Reference Register */
+ u16 cpr1; /* Timer1 Capture Register */
+ u16 cpr2; /* Timer2 Capture Register */
+ u16 cnr1; /* Timer1 Counter Register */
+ u16 cnr2; /* Timer2 Counter Register */
+ u16 mdr3; /* Timer3 Mode Register */
+ u16 mdr4; /* Timer4 Mode Register */
+ u16 rfr3; /* Timer3 Reference Register */
+ u16 rfr4; /* Timer4 Reference Register */
+ u16 cpr3; /* Timer3 Capture Register */
+ u16 cpr4; /* Timer4 Capture Register */
+ u16 cnr3; /* Timer3 Counter Register */
+ u16 cnr4; /* Timer4 Counter Register */
+ u16 evr1; /* Timer1 Event Register */
+ u16 evr2; /* Timer2 Event Register */
+ u16 evr3; /* Timer3 Event Register */
+ u16 evr4; /* Timer4 Event Register */
+#define GTEVR_REF 0x0002 /* Output reference event */
+#define GTEVR_CAP 0x0001 /* Counter Capture event */
+#define GTEVR_RES ~(EVR_CAP|EVR_REF)
+ u16 psr1; /* Timer1 Prescaler Register */
+ u16 psr2; /* Timer2 Prescaler Register */
+ u16 psr3; /* Timer3 Prescaler Register */
+ u16 psr4; /* Timer4 Prescaler Register */
+ u8 res[0xC0];
+} gtm8349_t;
+
+/*
+ * Integrated Programmable Interrupt Controller
+ */
+typedef struct ipic8349 {
+ u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */
+#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */
+#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */
+#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */
+#define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */
+#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */
+#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */
+#define SICFR_RES ~(SICFR_HPI|SICFR_MPSB|SICFR_MPSA|SICFR_IPSD|SICFR_IPSA|SICFR_HPIT)
+ u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */
+#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */
+#define SICVR_IVEC 0x0000007f /* Interrupt vector */
+#define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC)
+ u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */
+#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */
+#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */
+#define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */
+#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */
+#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */
+#define SIIH_TSEC2ER 0x04000000 /* TSEC2 Eror interrupt */
+#define SIIH_USB2DR 0x02000000 /* USB2 DR interrupt */
+#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */
+#define SIIH_UART1 0x00000080 /* UART1 interrupt */
+#define SIIH_UART2 0x00000040 /* UART2 interrupt */
+#define SIIH_SEC 0x00000020 /* SEC interrupt */
+#define SIIH_I2C1 0x00000004 /* I2C1 interrupt */
+#define SIIH_I2C2 0x00000002 /* I2C1 interrupt */
+#define SIIH_SPI 0x00000001 /* SPI interrupt */
+#define SIIH_RES ~(SIIH_TSEC1TX|SIIH_TSEC1RX|SIIH_TSEC1ER|SIIH_TSEC2TX \
+ |SIIH_TSEC2RX|SIIH_TSEC2ER|SIIH_USB2DR|SIIH_USB2MPH \
+ |SIIH_UART1 |SIIH_UART2 |SIIH_SEC |SIIH_I2C1 \
+ |SIIH_I2C2 |SIIH_SPI)
+ u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */
+#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */
+#define SIIL_PIT 0x40000000 /* PIT interrupt */
+#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */
+#define SIIL_PCI2 0x10000000 /* PCI2 interrupt */
+#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */
+#define SIIL_MU 0x04000000 /* Message Unit interrupt */
+#define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */
+#define SIIL_DMA 0x01000000 /* DMA interrupt */
+#define SIIL_GTM4 0x00800000 /* GTM4 interrupt */
+#define SIIL_GTM8 0x00400000 /* GTM8 interrupt */
+#define SIIL_GPIO1 0x00200000 /* GPIO1 interrupt */
+#define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */
+#define SIIL_DDR 0x00080000 /* DDR interrupt */
+#define SIIL_LBC 0x00040000 /* LBC interrupt */
+#define SIIL_GTM2 0x00020000 /* GTM2 interrupt */
+#define SIIL_GTM6 0x00010000 /* GTM6 interrupt */
+#define SIIL_PMC 0x00008000 /* PMC interrupt */
+#define SIIL_GTM3 0x00000800 /* GTM3 interrupt */
+#define SIIL_GTM7 0x00000400 /* GTM7 interrupt */
+#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */
+#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */
+#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */
+#define SIIL_RES ~(SIIL_RTCS |SIIL_PIT |SIIL_PCI1 |SIIL_PCI2 |SIIL_RTCA \
+ |SIIL_MU |SIIL_SBA |SIIL_DMA |SIIL_GTM4 |SIIL_GTM8 \
+ |SIIL_GPIO1|SIIL_GPIO2|SIIL_DDR |SIIL_LBC |SIIL_GTM2 \
+ |SIIL_GTM6 |SIIL_PMC |SIIL_GTM3 |SIIL_GTM7 |SIIL_GTM1 \
+ |SIIL_GTM5 |SIIL_DPTC )
+ u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */
+ u8 res0[8];
+ u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */
+ u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */
+ u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */
+ u8 res1[4];
+ u32 sepnr; /* System External Interrupt Pending Register (SEI) */
+ u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */
+ u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */
+#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */
+#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */
+#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */
+#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */
+#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */
+#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */
+#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */
+#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */
+#define PRR_RES ~(PRR_0|PRR_1|PRR_2|PRR_3|PRR_4|PRR_5|PRR_6|PRR_7)
+ u32 semsr; /* System External Interrupt Mask Register (SEI) */
+#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */
+#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */
+#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */
+#define SEI_IRQ3 0x10000000 /* IRQ3 external interrupt */
+#define SEI_IRQ4 0x08000000 /* IRQ4 external interrupt */
+#define SEI_IRQ5 0x04000000 /* IRQ5 external interrupt */
+#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */
+#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */
+#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */
+#define SEI_RES ~( SEI_IRQ0 |SEI_IRQ1 |SEI_IRQ2 |SEI_IRQ3 |SEI_IRQ4 \
+ |SEI_IRQ5 |SEI_IRQ6 |SEI_IRQ7 |SEI_SIRQ0)
+ u32 secnr; /* System External Interrupt Control Register (SECNR) */
+#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */
+#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */
+#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */
+#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */
+#define SECNR_EDI0 0x00008000 /* IRQ0 external interrupt edge/level detect */
+#define SECNR_EDI1 0x00004000 /* IRQ1 external interrupt edge/level detect */
+#define SECNR_EDI2 0x00002000 /* IRQ2 external interrupt edge/level detect */
+#define SECNR_EDI3 0x00001000 /* IRQ3 external interrupt edge/level detect */
+#define SECNR_EDI4 0x00000800 /* IRQ4 external interrupt edge/level detect */
+#define SECNR_EDI5 0x00000400 /* IRQ5 external interrupt edge/level detect */
+#define SECNR_EDI6 0x00000200 /* IRQ6 external interrupt edge/level detect */
+#define SECNR_EDI7 0x00000100 /* IRQ7 external interrupt edge/level detect */
+#define SECNR_RES ~( SECNR_MIXB0T|SECNR_MIXB1T|SECNR_MIXA0T|SECNR_SYSA1T \
+ |SECNR_EDI0 |SECNR_EDI1 |SECNR_EDI2 |SECNR_EDI3 \
+ |SECNR_EDI4 |SECNR_EDI5 |SECNR_EDI6 |SECNR_EDI7)
+ u32 sersr; /* System Error Status Register (SERR) */
+ u32 sermr; /* System Error Mask Register (SERR) */
+#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */
+#define SERR_WDT 0x40000000 /* WDT MCP request */
+#define SERR_SBA 0x20000000 /* SBA MCP request */
+#define SERR_DDR 0x10000000 /* DDR MCP request */
+#define SERR_LBC 0x08000000 /* LBC MCP request */
+#define SERR_PCI1 0x04000000 /* PCI1 MCP request */
+#define SERR_PCI2 0x02000000 /* PCI2 MCP request */
+#define SERR_MU 0x01000000 /* MU MCP request */
+#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */
+#define SERR_RES ~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_DDR |SERR_LBC \
+ |SERR_PCI1|SERR_PCI2|SERR_MU |SERR_RNC )
+ u32 sercr; /* System Error Control Register (SERCR) */
+#define SERCR_MCPR 0x00000001 /* MCP Route */
+#define SERCR_RES ~(SERCR_MCPR)
+ u8 res2[4];
+ u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */
+ u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */
+ u32 sefcr; /* System External Interrupt Force Register (SEI) */
+ u32 serfr; /* System Error Force Register (SERR) */
+ u8 res3[0xA0];
+} ipic8349_t;
+
+/*
+ * System Arbiter Registers
+ */
+typedef struct arbiter8349 {
+ u32 acr; /* Arbiter Configuration Register */
+#define ACR_COREDIS 0x10000000 /* Core disable. */
+#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */
+#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */
+#define ACR_RPTCNT 0x00000700 /* Repeat count. */
+#define ACR_APARK 0x00000030 /* Address parking. */
+#define ACR_PARKM 0x0000000F /* Parking master. */
+#define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM)
+ u32 atr; /* Arbiter Timers Register */
+#define ATR_DTO 0x00FF0000 /* Data time out. */
+#define ATR_ATO 0x000000FF /* Address time out. */
+#define ATR_RES ~(ATR_DTO|ATR_ATO)
+ u8 res[4];
+ u32 aer; /* Arbiter Event Register (AE)*/
+ u32 aidr; /* Arbiter Interrupt Definition Register (AE) */
+ u32 amr; /* Arbiter Mask Register (AE) */
+ u32 aeatr; /* Arbiter Event Attributes Register */
+#define AEATR_EVENT 0x07000000 /* Event type. */
+#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */
+#define AEATR_TBST 0x00000800 /* Transfer burst. */
+#define AEATR_TSIZE 0x00000700 /* Transfer Size. */
+#define AEATR_TTYPE 0x0000001F /* Transfer Type. */
+#define AEATR_RES ~(AEATR_EVENT|AEATR_MSTR_ID|AEATR_TBST|AEATR_TSIZE|AEATR_TTYPE)
+ u32 aeadr; /* Arbiter Event Address Register */
+ u32 aerr; /* Arbiter Event Response Register (AE)*/
+#define AE_ETEA 0x00000020 /* Transfer error. */
+#define AE_RES_ 0x00000010 /* Reserved transfer type. */
+#define AE_ECW 0x00000008 /* External control word transfer type. */
+#define AE_AO 0x00000004 /* Address Only transfer type. */
+#define AE_DTO 0x00000002 /* Data time out. */
+#define AE_ATO 0x00000001 /* Address time out. */
+#define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO)
+ u8 res1[0xDC];
+} arbiter8349_t;
+
+/*
+ * Reset Module
+ */
+typedef struct reset8349 {
+ u32 rcwl; /* RCWL Register */
+#define RCWL_LBIUCM 0x80000000 /* LBIUCM */
+#define RCWL_LBIUCM_SHIFT 31
+#define RCWL_DDRCM 0x40000000 /* DDRCM */
+#define RCWL_DDRCM_SHIFT 30
+#define RCWL_SVCOD 0x30000000 /* SVCOD */
+#define RCWL_SPMF 0x0f000000 /* SPMF */
+#define RCWL_SPMF_SHIFT 24
+#define RCWL_COREPLL 0x007F0000 /* COREPLL */
+#define RCWL_COREPLL_SHIFT 16
+#define RCWL_CEVCOD 0x000000C0 /* CEVCOD */
+#define RCWL_CEPDF 0x00000020 /* CEPDF */
+#define RCWL_CEPMF 0x0000001F /* CEPMF */
+#define RCWL_RES ~(RCWL_BIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF)
+ u32 rcwh; /* RCHL Register */
+#define RCWH_PCIHOST 0x80000000 /* PCIHOST */
+#define RCWH_PCIHOST_SHIFT 31
+#define RCWH_PCI64 0x40000000 /* PCI64 */
+#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB */
+#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB */
+#define RCWH_COREDIS 0x08000000 /* COREDIS */
+#define RCWH_BMS 0x04000000 /* BMS */
+#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ */
+#define RCWH_SWEN 0x00800000 /* SWEN */
+#define RCWH_ROMLOC 0x00700000 /* ROMLOC */
+#define RCWH_TSEC1M 0x0000c000 /* TSEC1M */
+#define RCWH_TSEC2M 0x00003000 /* TSEC2M */
+#define RCWH_TPR 0x00000100 /* TPR */
+#define RCWH_TLE 0x00000008 /* TLE */
+#define RCWH_LALE 0x00000004 /* LALE */
+#define RCWH_RES ~(RCWH_PCIHOST|RCWH_PCI64|RCWH_PCI1ARB|RCWH_PCI2ARB \
+ |RCWH_COREDIS|RCWH_BMS|RCWH_BOOTSEQ|RCWH_SWEN|RCWH_ROMLOC \
+ |RCWH_TSEC1M|RCWH_TSEC2M|RCWH_TPR|RCWH_TLE|RCWH_LALE)
+ u8 res0[8];
+ u32 rsr; /* Reset status Register */
+#define RSR_RSTSRC 0xE0000000 /* Reset source */
+#define RSR_RSTSRC_SHIFT 29
+#define RSR_BSF 0x00010000 /* Boot seq. fail */
+#define RSR_BSF_SHIFT 16
+#define RSR_SWSR 0x00002000 /* software soft reset */
+#define RSR_SWSR_SHIFT 13
+#define RSR_SWHR 0x00001000 /* software hard reset */
+#define RSR_SWHR_SHIFT 12
+#define RSR_JHRS 0x00000200 /* jtag hreset */
+#define RSR_JHRS_SHIFT 9
+#define RSR_JSRS 0x00000100 /* jtag sreset status */
+#define RSR_JSRS_SHIFT 8
+#define RSR_CSHR 0x00000010 /* checkstop reset status */
+#define RSR_CSHR_SHIFT 4
+#define RSR_SWRS 0x00000008 /* software watchdog reset status */
+#define RSR_SWRS_SHIFT 3
+#define RSR_BMRS 0x00000004 /* bus monitop reset status */
+#define RSR_BMRS_SHIFT 2
+#define RSR_SRS 0x00000002 /* soft reset status */
+#define RSR_SRS_SHIFT 1
+#define RSR_HRS 0x00000001 /* hard reset status */
+#define RSR_HRS_SHIFT 0
+#define RSR_RES ~(RSR_RSTSRC|RSR_BSF|RSR_SWSR|RSR_SWHR|RSR_JHRS|RSR_JSRS|RSR_CSHR|RSR_SWRS|RSR_BMRS|RSR_SRS|RSR_HRS)
+ u32 rmr; /* Reset mode Register */
+#define RMR_CSRE 0x00000001 /* checkstop reset enable */
+#define RMR_CSRE_SHIFT 0
+#define RMR_RES ~(RMR_CSRE)
+ u32 rpr; /* Reset protection Register */
+ u32 rcr; /* Reset Control Register */
+#define RCR_SWHR 0x00000002 /* software hard reset */
+#define RCR_SWSR 0x00000001 /* software soft reset */
+#define RCR_RES ~(RCR_SWHR|RCR_SWSR)
+ u32 rcer; /* Reset Control Enable Register */
+#define RCER_CRE 0x00000001 /* software hard reset */
+#define RCER_RES ~(RCER_CRE)
+ u8 res1[0xDC];
+} reset8349_t;
+
+typedef struct clk8349 {
+ u32 spmr; /* system PLL mode Register */
+#define SPMR_LBIUCM 0x80000000 /* LBIUCM */
+#define SPMR_DDRCM 0x40000000 /* DDRCM */
+#define SPMR_SVCOD 0x30000000 /* SVCOD */
+#define SPMR_SPMF 0x0F000000 /* SPMF */
+#define SPMR_CKID 0x00800000 /* CKID */
+#define SPMR_CKID_SHIFT 23
+#define SPMR_COREPLL 0x007F0000 /* COREPLL */
+#define SPMR_CEVCOD 0x000000C0 /* CEVCOD */
+#define SPMR_CEPDF 0x00000020 /* CEPDF */
+#define SPMR_CEPMF 0x0000001F /* CEPMF */
+#define SPMR_RES ~(SPMR_LBIUCM|SPMR_DDRCM|SPMR_SVCOD|SPMR_SPMF|SPMR_CKID \
+ |SPMR_COREPLL|SPMR_CEVCOD|SPMR_CEPDF|SPMR_CEPMF)
+ u32 occr; /* output clock control Register */
+#define OCCR_PCICOE0 0x80000000 /* PCICOE0 */
+#define OCCR_PCICOE1 0x40000000 /* PCICOE1 */
+#define OCCR_PCICOE2 0x20000000 /* PCICOE2 */
+#define OCCR_PCICOE3 0x10000000 /* PCICOE3 */
+#define OCCR_PCICOE4 0x08000000 /* PCICOE4 */
+#define OCCR_PCICOE5 0x04000000 /* PCICOE5 */
+#define OCCR_PCICOE6 0x02000000 /* PCICOE6 */
+#define OCCR_PCICOE7 0x01000000 /* PCICOE7 */
+#define OCCR_PCICD0 0x00800000 /* PCICD0 */
+#define OCCR_PCICD1 0x00400000 /* PCICD1 */
+#define OCCR_PCICD2 0x00200000 /* PCICD2 */
+#define OCCR_PCICD3 0x00100000 /* PCICD3 */
+#define OCCR_PCICD4 0x00080000 /* PCICD4 */
+#define OCCR_PCICD5 0x00040000 /* PCICD5 */
+#define OCCR_PCICD6 0x00020000 /* PCICD6 */
+#define OCCR_PCICD7 0x00010000 /* PCICD7 */
+#define OCCR_PCI1CR 0x00000002 /* PCI1CR */
+#define OCCR_PCI2CR 0x00000001 /* PCI2CR */
+#define OCCR_RES ~(OCCR_PCICOE0|OCCR_PCICOE1|OCCR_PCICOE2|OCCR_PCICOE3|OCCR_PCICOE4 \
+ |OCCR_PCICOE5|OCCR_PCICOE6|OCCR_PCICOE7|OCCR_PCICD0|OCCR_PCICD1 \
+ |OCCR_PCICD2 |OCCR_PCICD3 |OCCR_PCICD4 |OCCR_PCICD5|OCCR_PCICD6 \
+ |OCCR_PCICD7 |OCCR_PCI1CR |OCCR_PCI2CR )
+ u32 sccr; /* system clock control Register */
+#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */
+#define SCCR_TSEC1CM_SHIFT 30
+#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */
+#define SCCR_TSEC2CM_SHIFT 28
+#define SCCR_ENCCM 0x03000000 /* ENCCM */
+#define SCCR_ENCCM_SHIFT 24
+#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM */
+#define SCCR_USBMPHCM_SHIFT 22
+#define SCCR_USBDRCM 0x00300000 /* USBDRCM */
+#define SCCR_USBDRCM_SHIFT 20
+#define SCCR_PCICM 0x00010000 /* PCICM */
+#define SCCR_RES ~( SCCR_TSEC1CM|SCCR_TSEC2CM|SCCR_ENCCM|SCCR_USBMPHCM \
+ |SCCR_USBDRCM|SCCR_PCICM)
+ u8 res0[0xF4];
+} clk8349_t;
+
+/*
+ * Power Management Control Module
+ */
+typedef struct pmc8349 {
+ u32 pmccr; /* PMC Configuration Register */
+#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */
+#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */
+#define PMCCR_RES ~(PMCCR_SLPEN|PMCCR_DLPEN)
+ u32 pmcer; /* PMC Event Register */
+#define PMCER_PMCI 0x00000001 /* PMC Interrupt */
+#define PMCER_RES ~(PMCER_PMCI)
+ u32 pmcmr; /* PMC Mask Register */
+#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */
+#define PMCMR_RES ~(PMCMR_PMCIE)
+ u8 res0[0xF4];
+} pmc8349_t;
+
+
+/*
+ * general purpose I/O module
+ */
+typedef struct gpio8349 {
+ u32 dir; /* direction register */
+ u32 odr; /* open drain register */
+ u32 dat; /* data register */
+ u32 ier; /* interrupt event register */
+ u32 imr; /* interrupt mask register */
+ u32 icr; /* external interrupt control register */
+ u8 res0[0xE8];
+} gpio8349_t;
+
+/*
+ * DDR Memory Controller Memory Map
+ */
+typedef struct ddr_cs_bnds{
+ u32 csbnds;
+#define CSBNDS_SA 0x00FF0000
+#define CSBNDS_SA_SHIFT 16
+#define CSBNDS_EA 0x000000FF
+#define CSBNDS_EA_SHIFT 0
+ u8 res0[4];
+} ddr_cs_bnds_t;
+
+typedef struct ddr8349{
+ ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */
+ u8 res0[0x60];
+ u32 cs_config[4]; /**< Chip Select x Configuration */
+#define CSCONFIG_EN 0x80000000
+#define CSCONFIG_AP 0x00800000
+#define CSCONFIG_ROW_BIT 0x00000700
+#define CSCONFIG_ROW_BIT_12 0x00000000
+#define CSCONFIG_ROW_BIT_13 0x00000100
+#define CSCONFIG_ROW_BIT_14 0x00000200
+#define CSCONFIG_COL_BIT 0x00000007
+#define CSCONFIG_COL_BIT_8 0x00000000
+#define CSCONFIG_COL_BIT_9 0x00000001
+#define CSCONFIG_COL_BIT_10 0x00000002
+#define CSCONFIG_COL_BIT_11 0x00000003
+ u8 res1[0x78];
+ u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */
+#define TIMING_CFG1_PRETOACT 0x70000000
+#define TIMING_CFG1_PRETOACT_SHIFT 28
+#define TIMING_CFG1_ACTTOPRE 0x0F000000
+#define TIMING_CFG1_ACTTOPRE_SHIFT 24
+#define TIMING_CFG1_ACTTORW 0x00700000
+#define TIMING_CFG1_ACTTORW_SHIFT 20
+#define TIMING_CFG1_CASLAT 0x00070000
+#define TIMING_CFG1_CASLAT_SHIFT 16
+#define TIMING_CFG1_REFREC 0x0000F000
+#define TIMING_CFG1_REFREC_SHIFT 12
+#define TIMING_CFG1_WRREC 0x00000700
+#define TIMING_CFG1_WRREC_SHIFT 8
+#define TIMING_CFG1_ACTTOACT 0x00000070
+#define TIMING_CFG1_ACTTOACT_SHIFT 4
+#define TIMING_CFG1_WRTORD 0x00000007
+#define TIMING_CFG1_WRTORD_SHIFT 0
+
+ u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */
+#define TIMING_CFG2_CPO 0x0F000000
+#define TIMING_CFG2_CPO_SHIFT 24
+#define TIMING_CFG2_ACSM 0x00080000
+#define TIMING_CFG2_WR_DATA_DELAY 0x00001C00
+#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10
+
+ u32 sdram_cfg; /**< SDRAM Control Configuration */
+#define SDRAM_CFG_MEM_EN 0x80000000
+#define SDRAM_CFG_SREN 0x40000000
+#define SDRAM_CFG_ECC_EN 0x20000000
+#define SDRAM_CFG_RD_EN 0x10000000
+#define SDRAM_CFG_SDRAM_TYPE 0x03000000
+#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
+#define SDRAM_CFG_DYN_PWR 0x00200000
+#define SDRAM_CFG_32_BE 0x00080000
+#define SDRAM_CFG_8_BE 0x00040000
+#define SDRAM_CFG_NCAP 0x00020000
+#define SDRAM_CFG_2T_EN 0x00008000
+
+ u8 res2[4];
+ u32 sdram_mode; /**< SDRAM Mode Configuration */
+#define SDRAM_MODE_ESD 0xFFFF0000
+#define SDRAM_MODE_ESD_SHIFT 16
+#define SDRAM_MODE_SD 0x0000FFFF
+#define SDRAM_MODE_SD_SHIFT 0
+
+ u8 res3[8];
+ u32 sdram_interval; /**< SDRAM Interval Configuration */
+#define SDRAM_INTERVAL_REFINT 0x3FFF0000
+#define SDRAM_INTERVAL_REFINT_SHIFT 16
+#define SDRAM_INTERVAL_BSTOPRE 0x00003FFF
+#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0
+ u8 res9[8];
+ u32 sdram_clk_cntl;
+ u8 res4[0xCCC];
+ u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */
+ u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */
+ u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */
+ u8 res5[0x14];
+ u32 capture_data_hi; /**< Memory Data Path Read Capture High */
+ u32 capture_data_lo; /**< Memory Data Path Read Capture Low */
+ u32 capture_ecc; /**< Memory Data Path Read Capture ECC */
+ u8 res6[0x14];
+ u32 err_detect; /**< Memory Error Detect */
+ u32 err_disable; /**< Memory Error Disable */
+ u32 err_int_en; /**< Memory Error Interrupt Enable */
+ u32 capture_attributes; /**< Memory Error Attributes Capture */
+ u32 capture_address; /**< Memory Error Address Capture */
+ u32 capture_ext_address;/**< Memory Error Extended Address Capture */
+ u32 err_sbe; /**< Memory Single-Bit ECC Error Management */
+ u8 res7[0xA4];
+ u32 debug_reg;
+ u8 res8[0xFC];
+} ddr8349_t;
+
+/*
+ * I2C1 Controller
+ */
+
+
+/*
+ * DUART
+ */
+typedef struct duart8349{
+ u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */
+ u8 uier_udmb; /**< combined register for UIER and UDMB */
+ u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */
+ u8 ulcr; /**< line control register */
+ u8 umcr; /**< MODEM control register */
+ u8 ulsr; /**< line status register */
+ u8 umsr; /**< MODEM status register */
+ u8 uscr; /**< scratch register */
+ u8 res0[8];
+ u8 udsr; /**< DMA status register */
+ u8 res1[3];
+ u8 res2[0xEC];
+
+} duart8349_t;
+
+/*
+ * Local Bus Controller Registers
+ */
+typedef struct lbus_bank{
+ u32 br; /**< Base Register */
+ u32 or; /**< Base Register */
+} lbus_bank_t;
+
+typedef struct lbus8349 {
+ lbus_bank_t bank[8];
+ u8 res0[0x28];
+ u32 mar; /**< UPM Address Register */
+ u8 res1[0x4];
+ u32 mamr; /**< UPMA Mode Register */
+ u32 mbmr; /**< UPMB Mode Register */
+ u32 mcmr; /**< UPMC Mode Register */
+ u8 res2[0x8];
+ u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */
+ u32 mdr; /**< UPM Data Register */
+ u8 res3[0x8];
+ u32 lsdmr; /**< SDRAM Mode Register */
+ u8 res4[0x8];
+ u32 lurt; /**< UPM Refresh Timer */
+ u32 lsrt; /**< SDRAM Refresh Timer */
+ u8 res5[0x8];
+ u32 ltesr; /**< Transfer Error Status Register */
+ u32 ltedr; /**< Transfer Error Disable Register */
+ u32 lteir; /**< Transfer Error Interrupt Register */
+ u32 lteatr; /**< Transfer Error Attributes Register */
+ u32 ltear; /**< Transfer Error Address Register */
+ u8 res6[0xC];
+ u32 lbcr; /**< Configuration Register */
+#define LBCR_LDIS 0x80000000
+#define LBCR_LDIS_SHIFT 31
+#define LBCR_BCTLC 0x00C00000
+#define LBCR_BCTLC_SHIFT 22
+#define LBCR_LPBSE 0x00020000
+#define LBCR_LPBSE_SHIFT 17
+#define LBCR_EPAR 0x00010000
+#define LBCR_EPAR_SHIFT 16
+#define LBCR_BMT 0x0000FF00
+#define LBCR_BMT_SHIFT 8
+ u32 lcrr; /**< Clock Ratio Register */
+#define LCRR_DBYP 0x80000000
+#define LCRR_DBYP_SHIFT 31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_SHIFT 28
+#define LCRR_ECL 0x03000000
+#define LCRR_ECL_SHIFT 24
+#define LCRR_EADC 0x00030000
+#define LCRR_EADC_SHIFT 16
+#define LCRR_CLKDIV 0x0000000F
+#define LCRR_CLKDIV_SHIFT 0
+
+
+ u8 res7[0x28];
+ u8 res8[0xF00];
+} lbus8349_t;
+
+/*
+ * Serial Peripheral Interface
+ */
+typedef struct spi8349
+{
+ u32 mode; /**< mode register */
+ u32 event; /**< event register */
+ u32 mask; /**< mask register */
+ u32 com; /**< command register */
+ u8 res0[0x10];
+ u32 tx; /**< transmit register */
+ u32 rx; /**< receive register */
+ u8 res1[0xD8];
+} spi8349_t;
+
+typedef struct dma8349 {
+ u8 fixme[0x300];
+} dma8349_t;
+
+/*
+ * PCI Software Configuration Registers
+ */
+typedef struct pciconf8349 {
+ u32 config_address;
+#define PCI_CONFIG_ADDRESS_EN 0x80000000
+#define PCI_CONFIG_ADDRESS_BN_SHIFT 16
+#define PCI_CONFIG_ADDRESS_BN_MASK 0x00ff0000
+#define PCI_CONFIG_ADDRESS_DN_SHIFT 11
+#define PCI_CONFIG_ADDRESS_DN_MASK 0x0000f800
+#define PCI_CONFIG_ADDRESS_FN_SHIFT 8
+#define PCI_CONFIG_ADDRESS_FN_MASK 0x00000700
+#define PCI_CONFIG_ADDRESS_RN_SHIFT 0
+#define PCI_CONFIG_ADDRESS_RN_MASK 0x000000fc
+ u32 config_data;
+ u32 int_ack;
+ u8 res[116];
+} pciconf8349_t;
+
+/*
+ * PCI Outbound Translation Register
+ */
+typedef struct pci_outbound_window {
+ u32 potar;
+ u8 res0[4];
+ u32 pobar;
+ u8 res1[4];
+ u32 pocmr;
+ u8 res2[4];
+} pot8349_t;
+/*
+ * Sequencer
+ */
+typedef struct ios8349 {
+ pot8349_t pot[6];
+#define POTAR_TA_MASK 0x000fffff
+#define POBAR_BA_MASK 0x000fffff
+#define POCMR_EN 0x80000000
+#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */
+#define POCMR_SE 0x20000000 /* streaming enable */
+#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2*/
+#define POCMR_CM_MASK 0x000fffff
+#define POCMR_CM_4G 0x00000000
+#define POCMR_CM_2G 0x00080000
+#define POCMR_CM_1G 0x000C0000
+#define POCMR_CM_512M 0x000E0000
+#define POCMR_CM_256M 0x000F0000
+#define POCMR_CM_128M 0x000F8000
+#define POCMR_CM_64M 0x000FC000
+#define POCMR_CM_32M 0x000FE000
+#define POCMR_CM_16M 0x000FF000
+#define POCMR_CM_8M 0x000FF800
+#define POCMR_CM_4M 0x000FFC00
+#define POCMR_CM_2M 0x000FFE00
+#define POCMR_CM_1M 0x000FFF00
+#define POCMR_CM_512K 0x000FFF80
+#define POCMR_CM_256K 0x000FFFC0
+#define POCMR_CM_128K 0x000FFFE0
+#define POCMR_CM_64K 0x000FFFF0
+#define POCMR_CM_32K 0x000FFFF8
+#define POCMR_CM_16K 0x000FFFFC
+#define POCMR_CM_8K 0x000FFFFE
+#define POCMR_CM_4K 0x000FFFFF
+ u8 res0[0x60];
+ u32 pmcr;
+ u8 res1[4];
+ u32 dtcr;
+ u8 res2[4];
+} ios8349_t;
+
+/*
+ * PCI Controller Control and Status Registers
+ */
+typedef struct pcictrl8349 {
+ u32 esr;
+#define ESR_MERR 0x80000000
+#define ESR_APAR 0x00000400
+#define ESR_PCISERR 0x00000200
+#define ESR_MPERR 0x00000100
+#define ESR_TPERR 0x00000080
+#define ESR_NORSP 0x00000040
+#define ESR_TABT 0x00000020
+ u32 ecdr;
+#define ECDR_APAR 0x00000400
+#define ECDR_PCISERR 0x00000200
+#define ECDR_MPERR 0x00000100
+#define ECDR_TPERR 0x00000080
+#define ECDR_NORSP 0x00000040
+#define ECDR_TABT 0x00000020
+ u32 eer;
+#define EER_APAR 0x00000400
+#define EER_PCISERR 0x00000200
+#define EER_MPERR 0x00000100
+#define EER_TPERR 0x00000080
+#define EER_NORSP 0x00000040
+#define EER_TABT 0x00000020
+ u32 eatcr;
+#define EATCR_ERRTYPR_MASK 0x70000000
+#define EATCR_ERRTYPR_APR 0x00000000 /* address parity error */
+#define EATCR_ERRTYPR_WDPR 0x10000000 /* write data parity error */
+#define EATCR_ERRTYPR_RDPR 0x20000000 /* read data parity error */
+#define EATCR_ERRTYPR_MA 0x30000000 /* master abort */
+#define EATCR_ERRTYPR_TA 0x40000000 /* target abort */
+#define EATCR_ERRTYPR_SE 0x50000000 /* system error indication received */
+#define EATCR_ERRTYPR_PEA 0x60000000 /* parity error indication received on a read */
+#define EATCR_ERRTYPR_PEW 0x70000000 /* parity error indication received on a write */
+#define EATCR_BN_MASK 0x0f000000 /* beat number */
+#define EATCR_BN_1st 0x00000000
+#define EATCR_BN_2ed 0x01000000
+#define EATCR_BN_3rd 0x02000000
+#define EATCR_BN_4th 0x03000000
+#define EATCR_BN_5th 0x0400000
+#define EATCR_BN_6th 0x05000000
+#define EATCR_BN_7th 0x06000000
+#define EATCR_BN_8th 0x07000000
+#define EATCR_BN_9th 0x08000000
+#define EATCR_TS_MASK 0x00300000 /* transaction size */
+#define EATCR_TS_4 0x00000000
+#define EATCR_TS_1 0x00100000
+#define EATCR_TS_2 0x00200000
+#define EATCR_TS_3 0x00300000
+#define EATCR_ES_MASK 0x000f0000 /* error source */
+#define EATCR_ES_EM 0x00000000 /* external master */
+#define EATCR_ES_DMA 0x00050000
+#define EATCR_CMD_MASK 0x0000f000
+#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable*/
+#define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */
+#define EATCR_HPB 0x00000004 /* high parity bit */
+#define EATCR_PB 0x00000002 /* parity bit*/
+#define EATCR_VI 0x00000001 /* error information valid */
+ u32 eacr;
+ u32 eeacr;
+ u32 edlcr;
+ u32 edhcr;
+ u32 gcr;
+ u32 ecr;
+ u32 gsr;
+ u8 res0[12];
+ u32 pitar2;
+ u8 res1[4];
+ u32 pibar2;
+ u32 piebar2;
+ u32 piwar2;
+ u8 res2[4];
+ u32 pitar1;
+ u8 res3[4];
+ u32 pibar1;
+ u32 piebar1;
+ u32 piwar1;
+ u8 res4[4];
+ u32 pitar0;
+ u8 res5[4];
+ u32 pibar0;
+ u8 res6[4];
+ u32 piwar0;
+ u8 res7[132];
+#define PITAR_TA_MASK 0x000fffff
+#define PIBAR_MASK 0xffffffff
+#define PIEBAR_EBA_MASK 0x000fffff
+#define PIWAR_EN 0x80000000
+#define PIWAR_PF 0x20000000
+#define PIWAR_RTT_MASK 0x000f0000
+#define PIWAR_RTT_NO_SNOOP 0x00040000
+#define PIWAR_RTT_SNOOP 0x00050000
+#define PIWAR_WTT_MASK 0x0000f000
+#define PIWAR_WTT_NO_SNOOP 0x00004000
+#define PIWAR_WTT_SNOOP 0x00005000
+#define PIWAR_IWS_MASK 0x0000003F
+#define PIWAR_IWS_4K 0x0000000B
+#define PIWAR_IWS_8K 0x0000000C
+#define PIWAR_IWS_16K 0x0000000D
+#define PIWAR_IWS_32K 0x0000000E
+#define PIWAR_IWS_64K 0x0000000F
+#define PIWAR_IWS_128K 0x00000010
+#define PIWAR_IWS_256K 0x00000011
+#define PIWAR_IWS_512K 0x00000012
+#define PIWAR_IWS_1M 0x00000013
+#define PIWAR_IWS_2M 0x00000014
+#define PIWAR_IWS_4M 0x00000015
+#define PIWAR_IWS_8M 0x00000016
+#define PIWAR_IWS_16M 0x00000017
+#define PIWAR_IWS_32M 0x00000018
+#define PIWAR_IWS_64M 0x00000019
+#define PIWAR_IWS_128M 0x0000001A
+#define PIWAR_IWS_256M 0x0000001B
+#define PIWAR_IWS_512M 0x0000001C
+#define PIWAR_IWS_1G 0x0000001D
+#define PIWAR_IWS_2G 0x0000001E
+} pcictrl8349_t;
+
+/*
+ * USB
+ */
+typedef struct usb8349 {
+ u8 fixme[0x2000];
+} usb8349_t;
+
+/*
+ * TSEC
+ */
+typedef struct tsec8349 {
+ u8 fixme[0x1000];
+} tsec8349_t;
+
+/*
+ * Security
+ */
+typedef struct security8349 {
+ u8 fixme[0x10000];
+} security8349_t;
+
+typedef struct immap {
+ sysconf8349_t sysconf; /* System configuration */
+ wdt8349_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk8349_t rtc; /* Real Time Clock Module Registers */
+ rtclk8349_t pit; /* Periodic Interval Timer */
+ gtm8349_t gtm[2]; /* Global Timers Module */
+ ipic8349_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter8349_t arbiter; /* System Arbiter Registers */
+ reset8349_t reset; /* Reset Module */
+ clk8349_t clk; /* System Clock Module */
+ pmc8349_t pmc; /* Power Management Control Module */
+ gpio8349_t pgio[2]; /* general purpose I/O module */
+ u8 res0[0x200];
+ u8 DDL_DDR[0x100];
+ u8 DDL_LBIU[0x100];
+ u8 res1[0xE00];
+ ddr8349_t ddr; /* DDR Memory Controller Memory */
+ i2c_t i2c[2]; /* I2C1 Controller */
+ u8 res2[0x1300];
+ duart8349_t duart[2];/* DUART */
+ u8 res3[0x900];
+ lbus8349_t lbus; /* Local Bus Controller Registers */
+ u8 res4[0x1000];
+ spi8349_t spi; /* Serial Peripheral Interface */
+ u8 res5[0xF00];
+ dma8349_t dma; /* DMA */
+ pciconf8349_t pci_conf[2]; /* PCI Software Configuration Registers */
+ ios8349_t ios; /* Sequencer */
+ pcictrl8349_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */
+ u8 res6[0x19900];
+ usb8349_t usb;
+ tsec8349_t tsec[2];
+ u8 res7[0xA000];
+ security8349_t security;
+} immap_t;
+
+#endif /* __IMMAP_8349__ */
diff --git a/include/asm-ppc/mpc8349_pci.h b/include/asm-ppc/mpc8349_pci.h
new file mode 100644
index 0000000000..48255a34f9
--- /dev/null
+++ b/include/asm-ppc/mpc8349_pci.h
@@ -0,0 +1,167 @@
+#ifndef _PPC_KERNEL_MPC8349_PCI_H
+#define _PPC_KERNEL_MPC8349_PCI_H
+
+
+#define M8265_PCIBR0 0x101ac
+#define M8265_PCIBR1 0x101b0
+#define M8265_PCIMSK0 0x101c4
+#define M8265_PCIMSK1 0x101c8
+
+/* Bit definitions for PCIBR registers */
+
+#define PCIBR_ENABLE 0x00000001
+
+/* Bit definitions for PCIMSK registers */
+
+#define PCIMSK_32KB 0xFFFF8000 /* Size of window, smallest */
+#define PCIMSK_64KB 0xFFFF0000
+#define PCIMSK_128KB 0xFFFE0000
+#define PCIMSK_256KB 0xFFFC0000
+#define PCIMSK_512KB 0xFFF80000
+#define PCIMSK_1MB 0xFFF00000
+#define PCIMSK_2MB 0xFFE00000
+#define PCIMSK_4MB 0xFFC00000
+#define PCIMSK_8MB 0xFF800000
+#define PCIMSK_16MB 0xFF000000
+#define PCIMSK_32MB 0xFE000000
+#define PCIMSK_64MB 0xFC000000
+#define PCIMSK_128MB 0xF8000000
+#define PCIMSK_256MB 0xF0000000
+#define PCIMSK_512MB 0xE0000000
+#define PCIMSK_1GB 0xC0000000 /* Size of window, largest */
+
+
+#define M826X_SCCR_PCI_MODE_EN 0x100
+
+
+/*
+ * Outbound ATU registers (3 sets). These registers control how 60x bus
+ * (local) addresses are translated to PCI addresses when the MPC826x is
+ * a PCI bus master (initiator).
+ */
+
+#define POTAR_REG0 0x10800 /* PCI Outbound Translation Addr registers */
+#define POTAR_REG1 0x10818
+#define POTAR_REG2 0x10830
+
+#define POBAR_REG0 0x10808 /* PCI Outbound Base Addr registers */
+#define POBAR_REG1 0x10820
+#define POBAR_REG2 0x10838
+
+#define POCMR_REG0 0x10810 /* PCI Outbound Comparison Mask registers */
+#define POCMR_REG1 0x10828
+#define POCMR_REG2 0x10840
+
+/* Bit definitions for POMCR registers */
+
+#define POCMR_MASK_4KB 0x000FFFFF
+#define POCMR_MASK_8KB 0x000FFFFE
+#define POCMR_MASK_16KB 0x000FFFFC
+#define POCMR_MASK_32KB 0x000FFFF8
+#define POCMR_MASK_64KB 0x000FFFF0
+#define POCMR_MASK_128KB 0x000FFFE0
+#define POCMR_MASK_256KB 0x000FFFC0
+#define POCMR_MASK_512KB 0x000FFF80
+#define POCMR_MASK_1MB 0x000FFF00
+#define POCMR_MASK_2MB 0x000FFE00
+#define POCMR_MASK_4MB 0x000FFC00
+#define POCMR_MASK_8MB 0x000FF800
+#define POCMR_MASK_16MB 0x000FF000
+#define POCMR_MASK_32MB 0x000FE000
+#define POCMR_MASK_64MB 0x000FC000
+#define POCMR_MASK_128MB 0x000F8000
+#define POCMR_MASK_256MB 0x000F0000
+#define POCMR_MASK_512MB 0x000E0000
+#define POCMR_MASK_1GB 0x000C0000
+
+#define POCMR_ENABLE 0x80000000
+#define POCMR_PCI_IO 0x40000000
+#define POCMR_PREFETCH_EN 0x20000000
+
+/* Soft PCI reset */
+
+#define PCI_GCR_REG 0x10880
+
+/* Bit definitions for PCI_GCR registers */
+
+#define PCIGCR_PCI_BUS_EN 0x1
+
+/*
+ * Inbound ATU registers (2 sets). These registers control how PCI
+ * addresses are translated to 60x bus (local) addresses when the
+ * MPC826x is a PCI bus target.
+ */
+
+#define PITAR_REG1 0x108D0
+#define PIBAR_REG1 0x108D8
+#define PICMR_REG1 0x108E0
+#define PITAR_REG0 0x108E8
+#define PIBAR_REG0 0x108F0
+#define PICMR_REG0 0x108F8
+
+/* Bit definitions for PCI Inbound Comparison Mask registers */
+
+#define PICMR_MASK_4KB 0x000FFFFF
+#define PICMR_MASK_8KB 0x000FFFFE
+#define PICMR_MASK_16KB 0x000FFFFC
+#define PICMR_MASK_32KB 0x000FFFF8
+#define PICMR_MASK_64KB 0x000FFFF0
+#define PICMR_MASK_128KB 0x000FFFE0
+#define PICMR_MASK_256KB 0x000FFFC0
+#define PICMR_MASK_512KB 0x000FFF80
+#define PICMR_MASK_1MB 0x000FFF00
+#define PICMR_MASK_2MB 0x000FFE00
+#define PICMR_MASK_4MB 0x000FFC00
+#define PICMR_MASK_8MB 0x000FF800
+#define PICMR_MASK_16MB 0x000FF000
+#define PICMR_MASK_32MB 0x000FE000
+#define PICMR_MASK_64MB 0x000FC000
+#define PICMR_MASK_128MB 0x000F8000
+#define PICMR_MASK_256MB 0x000F0000
+#define PICMR_MASK_512MB 0x000E0000
+#define PICMR_MASK_1GB 0x000C0000
+
+#define PICMR_ENABLE 0x80000000
+#define PICMR_NO_SNOOP_EN 0x40000000
+#define PICMR_PREFETCH_EN 0x20000000
+
+/* PCI error Registers */
+
+#define PCI_ERROR_STATUS_REG 0x10884
+#define PCI_ERROR_MASK_REG 0x10888
+#define PCI_ERROR_CONTROL_REG 0x1088C
+#define PCI_ERROR_ADRS_CAPTURE_REG 0x10890
+#define PCI_ERROR_DATA_CAPTURE_REG 0x10898
+#define PCI_ERROR_CTRL_CAPTURE_REG 0x108A0
+
+/* PCI error Register bit defines */
+
+#define PCI_ERROR_PCI_ADDR_PAR 0x00000001
+#define PCI_ERROR_PCI_DATA_PAR_WR 0x00000002
+#define PCI_ERROR_PCI_DATA_PAR_RD 0x00000004
+#define PCI_ERROR_PCI_NO_RSP 0x00000008
+#define PCI_ERROR_PCI_TAR_ABT 0x00000010
+#define PCI_ERROR_PCI_SERR 0x00000020
+#define PCI_ERROR_PCI_PERR_RD 0x00000040
+#define PCI_ERROR_PCI_PERR_WR 0x00000080
+#define PCI_ERROR_I2O_OFQO 0x00000100
+#define PCI_ERROR_I2O_IPQO 0x00000200
+#define PCI_ERROR_IRA 0x00000400
+#define PCI_ERROR_NMI 0x00000800
+#define PCI_ERROR_I2O_DBMC 0x00001000
+
+/*
+ * Register pair used to generate configuration cycles on the PCI bus
+ * and access the MPC826x's own PCI configuration registers.
+ */
+
+#define PCI_CFG_ADDR_REG 0x10900
+#define PCI_CFG_DATA_REG 0x10904
+
+/* Bus parking decides where the bus control sits when idle */
+/* If modifying memory controllers for PCI park on the core */
+
+#define PPC_ACR_BUS_PARK_CORE 0x6
+#define PPC_ACR_BUS_PARK_PCI 0x3
+
+#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 20949dcc39..d4404c1295 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -200,6 +200,11 @@
#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
+
+#define HID0_ICE_SHIFT 15
+#define HID0_DCE_SHIFT 14
+#define HID0_DLOCK_SHIFT 12
+
#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
@@ -211,10 +216,10 @@
#define HID0_NAP (1<<22)
#define HID0_SLEEP (1<<21)
#define HID0_DPM (1<<20)
-#define HID0_ICE (1<<15) /* Instruction Cache Enable */
-#define HID0_DCE (1<<14) /* Data Cache Enable */
+#define HID0_ICE (1<<HID0_ICE_SHIFT) /* Instruction Cache Enable */
+#define HID0_DCE (1<<HID0_DCE_SHIFT) /* Data Cache Enable */
#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
-#define HID0_DLOCK (1<<12) /* Data Cache Lock */
+#define HID0_DLOCK (1<<HID0_DLOCK_SHIFT) /* Data Cache Lock */
#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
#define HID0_DCFI (1<<10) /* Data Cache Flash Invalidate */
#define HID0_DCI HID0_DCFI
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 5da0e68ba8..e821e91ecd 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -45,6 +45,9 @@ typedef struct bd_info {
#if defined(CONFIG_MPC5xxx)
unsigned long bi_mbar_base; /* base of internal registers */
#endif
+#if defined(CONFIG_MPC83XX)
+ unsigned long bi_immrbar;
+#endif
#if defined(CONFIG_MPC8220)
unsigned long bi_mbar_base; /* base of internal registers */
unsigned long bi_inpfreq; /* Input Freq, In MHz */
diff --git a/include/common.h b/include/common.h
index 625c389897..efc638d88c 100644
--- a/include/common.h
+++ b/include/common.h
@@ -83,6 +83,10 @@ typedef volatile unsigned char vu_char;
#include <mpc85xx.h>
#include <asm/immap_85xx.h>
#endif
+#ifdef CONFIG_MPC83XX
+#include <mpc83xx.h>
+#include <asm/immap_83xx.h>
+#endif
#ifdef CONFIG_4xx
#include <ppc4xx.h>
#endif
@@ -409,8 +413,9 @@ int sdram_adjust_866 (void);
int adjust_sdram_tbs_8xx (void);
#if defined(CONFIG_8260)
int prt_8260_clks (void);
-#endif
-#if defined(CONFIG_MPC5xxx)
+#elif defined(CONFIG_MPC83XX)
+int print_clock_conf(void);
+#elif defined(CONFIG_MPC5xxx)
int prt_mpc5xxx_clks (void);
#endif
#if defined(CONFIG_MPC8220)
diff --git a/include/configs/MPC8349ADS.h b/include/configs/MPC8349ADS.h
new file mode 100644
index 0000000000..4f4a99befe
--- /dev/null
+++ b/include/configs/MPC8349ADS.h
@@ -0,0 +1,609 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc8349ads board configuration file
+ *
+ * Please refer to doc/README.mpc83xxads for more info.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+#define CONFIG_MII
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 Family */
+#define CONFIG_MPC83XX 1 /* MPC83XX family */
+#define CONFIG_MPC8349 1 /* MPC8349 specific */
+#define CONFIG_MPC8349ADS 1 /* MPC8349ADS board specific */
+
+#define CONFIG_PCI
+
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
+
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+
+#define PCI_66M
+#ifdef PCI_66M
+#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
+#else
+#define CONFIG_83XX_CLKIN 33000000 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#ifdef PCI_66M
+#define CONFIG_SYS_CLK_FREQ 66000000
+#else
+#define CONFIG_SYS_CLK_FREQ 33000000
+#endif
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+#define CFG_IMMRBAR 0xE0000000
+
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00000000 /* memtest region */
+#define CFG_MEMTEST_END 0x00100000
+
+
+
+/*
+ * DDR Setup
+ */
+
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#undef CONFIG_DDR_2T_TIMING
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+
+#if defined(CONFIG_SPD_EEPROM)
+ /*
+ * Determine DDR configuration from I2C interface.
+ */
+ #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
+
+#else
+ /*
+ * Manually set up DDR parameters
+ */
+ #define CFG_DDR_SIZE 256 /* Mb */
+ #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+ #define CFG_DDR_TIMING_1 0x37344321
+ #define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
+ #define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
+ #define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
+ #define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page */
+#endif
+
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */
+#define CFG_FLASH_SIZE 8 /* FLASH size in MB */
+/* #define CFG_FLASH_USE_BUFFER_WRITE */
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \
+ (2 << BR_PS_SHIFT) | /* 32 bit port size */ \
+ BR_V) /* valid */
+#define CFG_OR0_PRELIM 0xff806ff7 /* 16Mb Flash size*/
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 16Mb window size */
+
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 64 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CFG_MID_FLASH_JUMP 0x7F000000
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+/*
+ * BCSR register on local bus 32KB, 8-bit wide for ADS config reg
+ */
+#define CFG_BCSR 0xF8000000
+#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */
+#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port-size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM 0xFFFFE8f0 /* length 32K */
+
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ * LCRR: DLL bypass, Clock divider is 4
+ * External Local Bus rate is
+ * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR 0x00000000
+
+#define CFG_LB_SDRAM /* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ * port-size = 32-bits = BR2[19:20] = 11
+ * no parity checking = BR2[21:22] = 00
+ * SDRAM for MSEL = BR2[24:26] = 011
+ * Valid = BR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM 0xf0001861 /*Port-size=32bit, MSEL=SDRAM*/
+
+#define CFG_LBLAWBAR2_PRELIM 0xF0000000
+
+#define CFG_LBLAWAR2_PRELIM 0x80000019 /*64M*/
+
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ * 64MB mask for AM, OR2[0:7] = 1111 1100
+ * XAM, OR2[17:18] = 11
+ * 9 columns OR2[19-21] = 010
+ * 13 rows OR2[23-25] = 100
+ * EAD set for extra time OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM 0xfc006901
+
+#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
+#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC3 (3 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
+#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29))
+#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \
+ | CFG_LBC_LSDMR_BSMA1516 \
+ | CFG_LBC_LSDMR_RFCR8 \
+ | CFG_LBC_LSDMR_PRETOACT6 \
+ | CFG_LBC_LSDMR_ACTTORW3 \
+ | CFG_LBC_LSDMR_BL8 \
+ | CFG_LBC_LSDMR_WRC3 \
+ | CFG_LBC_LSDMR_CL3 \
+ )
+
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_NORMAL)
+
+#endif
+
+
+
+
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_IMMRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+/* TSEC */
+#define CFG_TSEC1_OFFSET 0x24000
+#define CFG_TSEC1 (CFG_IMMRBAR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET 0x25000
+#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET)
+
+
+/* IO Configuration */
+#define CFG_IO_CONF (\
+ IO_CONF_UART |\
+ IO_CONF_TSEC1 |\
+ IO_CONF_IRQ0 |\
+ IO_CONF_IRQ1 |\
+ IO_CONF_IRQ2 |\
+ IO_CONF_IRQ3 |\
+ IO_CONF_IRQ4 |\
+ IO_CONF_IRQ5 |\
+ IO_CONF_IRQ6 |\
+ IO_CONF_IRQ7 )
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+
+
+#define CFG_PCI2_MEM_BASE 0xA0000000
+#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI2_IO_BASE 0x00000000
+#define CFG_PCI2_IO_PHYS 0xe3000000
+#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
+#if defined(CONFIG_PCI)
+
+//#define PCI_64BIT
+#define PCI_ALL_PCI1
+//#define PCI_ONE_PCI1
+//#define PCI_TWO_PCI1
+#if defined(PCI_64BIT)
+#undef PCI_ALL_PCI1
+#undef PCI_TWO_PCI1
+#undef PCI_ONE_PCI1
+#endif
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+ #define PCI_ENET0_IOADDR 0xFIXME
+ #define PCI_ENET0_MEMADDR 0xFIXME
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
+
+#endif /* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+#define CONFIG_GMII 1 /* MII PHY management */
+#define CONFIG_MPC83XX_TSEC1 1
+#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0"
+#define CONFIG_MPC83XX_TSEC2 1
+#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1"
+#define TSEC1_PHY_ADDR 0
+#define TSEC2_PHY_ADDR 1
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "TSEC0"
+
+#endif /* CONFIG_TSEC_ENET */
+
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
+#else
+ #define CFG_NO_FLASH 1 /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+ #if defined(CONFIG_PCI)
+ #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_PCI \
+ | CFG_CMD_I2C) \
+ & \
+ ~(CFG_CMD_ENV \
+ | CFG_CMD_LOADS))
+ #else
+ #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_I2C) \
+ & \
+ ~(CFG_CMD_ENV \
+ | CFG_CMD_LOADS))
+ #endif
+#else
+ #if defined(CONFIG_PCI)
+ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PCI \
+ | CFG_CMD_PING \
+ | CFG_CMD_I2C)
+ #else
+ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_I2C \
+ | CFG_CMD_MII \
+ )
+ #endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
+#endif
+
+#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */
+
+#define CFG_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_1X1 |\
+ HRCWL_CSB_TO_CLKIN_4X1 |\
+ HRCWL_VCO_1X2 |\
+ HRCWL_CORE_TO_CSB_2X1)
+
+#if defined(PCI_64BIT)
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_64_BIT_PCI |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_PCI2_ARBITER_DISABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_TSEC1M_IN_GMII |\
+ HRCWH_TSEC2M_IN_GMII )
+#else
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_32_BIT_PCI |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_PCI2_ARBITER_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_TSEC1M_IN_GMII |\
+ HRCWH_TSEC2M_IN_GMII )
+#endif
+
+
+#define CFG_HID0_INIT 0x000000000
+
+#define CFG_HID0_FINAL CFG_HID0_INIT
+
+/* #define CFG_HID0_FINAL (\
+ HID0_ENABLE_INSTRUCTION_CACHE |\
+ HID0_ENABLE_M_BIT |\
+ HID0_ENABLE_ADDRESS_BROADCAST ) */
+
+#define CFG_HID2 0x000000000
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+
+/*
+ * Environment Configuration
+ */
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR 00:04:9f:11:22:33
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:E0:0C:00:7D:01
+#endif
+
+#define CONFIG_IPADDR 10.193.20.150
+
+#define CONFIG_HOSTNAME unknown
+#define CONFIG_ROOTPATH /tftpboot/10.193.20.150
+#define CONFIG_BOOTFILE /tftpboot/vmlinux.150
+
+#define CONFIG_SERVERIP 10.193.20.58
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK 255.255.255.0
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE 115200
+
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=400000\0" \
+ "ramdiskfile=ramfs.83xx\0" \
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif /* __CONFIG_H */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
new file mode 100644
index 0000000000..5161df89eb
--- /dev/null
+++ b/include/mpc83xx.h
@@ -0,0 +1,289 @@
+/*
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc83xx.h
+ *
+ * MPC83xx specific definitions
+ */
+
+#ifndef __MPC83XX_H__
+#define __MPC83XX_H__
+
+#if defined(CONFIG_E300)
+#include <asm/e300.h>
+#endif
+
+/*
+ * MPC83xx cpu provide RCR register to do reset thing specially. easier
+ * to implement
+ */
+
+#define MPC83xx_RESET
+
+/*
+ * System reset offset (PowerPC standard)
+ */
+#define EXC_OFF_SYS_RESET 0x0100
+
+/*
+ * Default Internal Memory Register Space (Freescale recomandation)
+ */
+#define CONFIG_DEFAULT_IMMR 0xFF400000
+
+/*
+ * Watchdog
+ */
+#define SWCRR 0x0204
+#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */
+#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */
+#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit. */
+#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */
+#define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
+
+#define SWCNR 0x0208
+#define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field.
+#define SWCNR_RES ~(SWCNR_SWCN)
+
+#define SWSRR 0x020E
+
+/*
+ * Default Internal Memory Register Space (Freescale recomandation)
+ */
+#define IMMRBAR 0x0000
+#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Identifies the 12 most-significant address bits of the base of the 1 MByte internal memory window. */
+#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR)
+
+/*
+ * Default Internal Memory Register Space (Freescale recomandation)
+ */
+#define LBLAWBAR0 0x0020
+#define LBLAWAR0 0x0024
+#define LBLAWBAR1 0x0028
+#define LBLAWAR1 0x002C
+#define LBLAWBAR2 0x0030
+#define LBLAWAR2 0x0034
+#define LBLAWBAR3 0x0038
+#define LBLAWAR3 0x003C
+
+
+/*
+ * Base Registers & Option Registers
+ */
+#define BR0 0x5000
+#define BR1 0x5008
+#define BR2 0x5010
+#define BR3 0x5018
+#define BR4 0x5020
+#define BR5 0x5028
+#define BR6 0x5030
+#define BR7 0x5038
+
+#define BR_BA 0xFFFF8000
+#define BR_BA_SHIFT 15
+#define BR_PS 0x00001800
+#define BR_PS_SHIFT 11
+#define BR_DECC 0x00000600
+#define BR_DECC_SHIFT 9
+#define BR_WP 0x00000100
+#define BR_WP_SHIFT 8
+#define BR_MSEL 0x000000E0
+#define BR_MSEL_SHIFT 5
+#define BR_V 0x00000001
+#define BR_V_SHIFT 0
+#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+
+#define OR0 0x5004
+#define OR1 0x500C
+#define OR2 0x5014
+#define OR3 0x501C
+#define OR4 0x5024
+#define OR5 0x502C
+#define OR6 0x5034
+#define OR7 0x503C
+
+#define OR_GPCM_AM 0xFFFF8000
+#define OR_GPCM_AM_SHIFT 15
+#define OR_GPCM_BCTLD 0x00001000
+#define OR_GPCM_BCTLD_SHIFT 12
+#define OR_GPCM_CSNT 0x00000800
+#define OR_GPCM_CSNT_SHIFT 11
+#define OR_GPCM_ACS 0x00000600
+#define OR_GPCM_ACS_SHIFT 9
+#define OR_GPCM_XACS 0x00000100
+#define OR_GPCM_XACS_SHIFT 8
+#define OR_GPCM_SCY 0x000000F0
+#define OR_GPCM_SCY_SHIFT 4
+#define OR_GPCM_SETA 0x00000008
+#define OR_GPCM_SETA_SHIFT 3
+#define OR_GPCM_TRLX 0x00000004
+#define OR_GPCM_TRLX_SHIFT 2
+#define OR_GPCM_EHTR 0x00000002
+#define OR_GPCM_EHTR_SHIFT 1
+#define OR_GPCM_EAD 0x00000001
+#define OR_GPCM_EAD_SHIFT 0
+
+#define OR_UPM_AM 0xFFFF8000
+#define OR_UPM_AM_SHIFT 15
+#define OR_UPM_XAM 0x00006000
+#define OR_UPM_XAM_SHIFT 13
+#define OR_UPM_BCTLD 0x00001000
+#define OR_UPM_BCTLD_SHIFT 12
+#define OR_UPM_BI 0x00000100
+#define OR_UPM_BI_SHIFT 8
+#define OR_UPM_TRLX 0x00000004
+#define OR_UPM_TRLX_SHIFT 2
+#define OR_UPM_EHTR 0x00000002
+#define OR_UPM_EHTR_SHIFT 1
+#define OR_UPM_EAD 0x00000001
+#define OR_UPM_EAD_SHIFT 0
+
+#define OR_SDRAM_AM 0xFFFF8000
+#define OR_SDRAM_AM_SHIFT 15
+#define OR_SDRAM_XAM 0x00006000
+#define OR_SDRAM_XAM_SHIFT 13
+#define OR_SDRAM_COLS 0x00001C00
+#define OR_SDRAM_COLS_SHIFT 10
+#define OR_SDRAM_ROWS 0x000001C0
+#define OR_SDRAM_ROWS_SHIFT 6
+#define OR_SDRAM_PMSEL 0x00000020
+#define OR_SDRAM_PMSEL_SHIFT 5
+#define OR_SDRAM_EAD 0x00000001
+#define OR_SDRAM_EAD_SHIFT 0
+
+/*
+ * Hard Reset Configration Word - High
+ */
+#define HRCWH_PCI_AGENT 0x00000000
+#define HRCWH_PCI_HOST 0x80000000
+
+#define HRCWH_32_BIT_PCI 0x00000000
+#define HRCWH_64_BIT_PCI 0x40000000
+
+#define HRCWH_PCI1_ARBITER_DISABLE 0x00000000
+#define HRCWH_PCI1_ARBITER_ENABLE 0x20000000
+
+#define HRCWH_PCI2_ARBITER_DISABLE 0x00000000
+#define HRCWH_PCI2_ARBITER_ENABLE 0x10000000
+
+#define HRCWH_CORE_DISABLE 0x08000000
+#define HRCWH_CORE_ENABLE 0x00000000
+
+#define HRCWH_FROM_0X00000100 0x00000000
+#define HRCWH_FROM_0XFFF00100 0x04000000
+
+#define HRCWH_BOOTSEQ_DISABLE 0x00000000
+#define HRCWH_BOOTSEQ_NORMAL 0x01000000
+#define HRCWH_BOOTSEQ_EXTENDED 0x02000000
+
+#define HRCWH_SW_WATCHDOG_DISABLE 0x00000000
+#define HRCWH_SW_WATCHDOG_ENABLE 0x00800000
+
+#define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000
+#define HRCWH_ROM_LOC_PCI1 0x00100000
+#define HRCWH_ROM_LOC_PCI2 0x00200000
+#define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000
+#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000
+#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000
+
+#define HRCWH_TSEC1M_IN_RGMII 0x00000000
+#define HRCWH_TSEC1M_IN_RTBI 0x00004000
+#define HRCWH_TSEC1M_IN_GMII 0x00008000
+#define HRCWH_TSEC1M_IN_TBI 0x0000C000
+
+#define HRCWH_TSEC2M_IN_RGMII 0x00000000
+#define HRCWH_TSEC2M_IN_RTBI 0x00001000
+#define HRCWH_TSEC2M_IN_GMII 0x00002000
+#define HRCWH_TSEC2M_IN_TBI 0x00003000
+
+#define HRCWH_BIG_ENDIAN 0x00000000
+#define HRCWH_LITTLE_ENDIAN 0x00000008
+
+/*
+ * Hard Reset Configration Word - Low
+ */
+#define HRCWL_LCL_BUS_TO_SCB_CLK_1X1 0x00000000
+#define HRCWL_LCL_BUS_TO_SCB_CLK_2X1 0x80000000
+
+#define HRCWL_DDR_TO_SCB_CLK_1X1 0x00000000
+#define HRCWL_DDR_TO_SCB_CLK_2X1 0x40000000
+
+#define HRCWL_CSB_TO_CLKIN_16X1 0x00000000
+#define HRCWL_CSB_TO_CLKIN_1X1 0x01000000
+#define HRCWL_CSB_TO_CLKIN_2X1 0x02000000
+#define HRCWL_CSB_TO_CLKIN_3X1 0x03000000
+#define HRCWL_CSB_TO_CLKIN_4X1 0x04000000
+#define HRCWL_CSB_TO_CLKIN_5X1 0x05000000
+#define HRCWL_CSB_TO_CLKIN_6X1 0x06000000
+#define HRCWL_CSB_TO_CLKIN_7X1 0x07000000
+#define HRCWL_CSB_TO_CLKIN_8X1 0x08000000
+#define HRCWL_CSB_TO_CLKIN_9X1 0x09000000
+#define HRCWL_CSB_TO_CLKIN_10X1 0x0A000000
+#define HRCWL_CSB_TO_CLKIN_11X1 0x0B000000
+#define HRCWL_CSB_TO_CLKIN_12X1 0x0C000000
+#define HRCWL_CSB_TO_CLKIN_13X1 0x0D000000
+#define HRCWL_CSB_TO_CLKIN_14X1 0x0E000000
+#define HRCWL_CSB_TO_CLKIN_15X1 0x0F000000
+
+#define HRCWL_VCO_BYPASS 0x00000000
+#define HRCWL_VCO_1X2 0x00000000
+#define HRCWL_VCO_1X4 0x00200000
+#define HRCWL_VCO_1X8 0x00400000
+
+#define HRCWL_CORE_TO_CSB_BYPASS 0x00000000
+#define HRCWL_CORE_TO_CSB_1X1 0x00020000
+#define HRCWL_CORE_TO_CSB_1_5X1 0x00030000
+#define HRCWL_CORE_TO_CSB_2X1 0x00040000
+#define HRCWL_CORE_TO_CSB_2_5X1 0x00050000
+#define HRCWL_CORE_TO_CSB_3X1 0x00060000
+
+/*
+ * LCRR - Clock Ratio Register (10.3.1.16)
+ */
+#define LCRR_DBYP 0x80000000
+#define LCRR_DBYP_SHIFT 31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_1 0x10000000
+#define LCRR_BUFCMDC_2 0x20000000
+#define LCRR_BUFCMDC_3 0x30000000
+#define LCRR_BUFCMDC_4 0x00000000
+#define LCRR_BUFCMDC_SHIFT 28
+#define LCRR_ECL 0x03000000
+#define LCRR_ECL_4 0x00000000
+#define LCRR_ECL_5 0x01000000
+#define LCRR_ECL_6 0x02000000
+#define LCRR_ECL_7 0x03000000
+#define LCRR_ECL_SHIFT 24
+#define LCRR_EADC 0x00030000
+#define LCRR_EADC_1 0x00010000
+#define LCRR_EADC_2 0x00020000
+#define LCRR_EADC_3 0x00030000
+#define LCRR_EADC_4 0x00000000
+#define LCRR_EADC_SHIFT 16
+#define LCRR_CLKDIV 0x0000000F
+#define LCRR_CLKDIV_2 0x00000002
+#define LCRR_CLKDIV_4 0x00000004
+#define LCRR_CLKDIV_8 0x00000008
+#define LCRR_CLKDIV_SHIFT 0
+
+
+#endif /* __MPC83XX_H__ */