arm: Move cpu/$CPU to arch/arm/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 0 insertions, 272 deletions

diff --git a/cpu/s3c44b0/start.S b/cpu/s3c44b0/start.S
deleted file mode 100644
index f5a3d3ac38..0000000000
--- a/cpu/s3c44b0/start.S
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Startup Code for S3C44B0 CPU-core
- *
- * (C) Copyright 2004
- * DAVE Srl
- *
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info@wawnet.biz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/*
- * Jump vector table
- */
-
-
-.globl _start
-_start:	b       reset
-	add	pc, pc, #0x0c000000
-	add	pc, pc, #0x0c000000
-	add	pc, pc, #0x0c000000
-	add	pc, pc, #0x0c000000
-	add	pc, pc, #0x0c000000
-	add	pc, pc, #0x0c000000
-	add	pc, pc, #0x0c000000
-
-	.balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * relocate u-boot to ram
- * setup stack
- * jump to second stage
- *
- *************************************************************************
- */
-
-_TEXT_BASE:
-	.word	TEXT_BASE
-
-.globl _armboot_start
-_armboot_start:
-	.word _start
-
-/*
- * These are defined in the board-specific linker script.
- */
-.globl _bss_start
-_bss_start:
-	.word __bss_start
-
-.globl _bss_end
-_bss_end:
-	.word _end
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
-	.word	0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
-	.word 0x0badc0de
-#endif
-
-
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0x13
-	msr	cpsr,r0
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-	/*
-	 * before relocating, we have to setup RAM timing
-	 * because memory timing is board-dependend, you will
-	 * find a lowlevel_init.S in your board directory.
-	 */
-	bl	lowlevel_init
-#endif
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
-
-/*
-	now copy to sram the interrupt vector
-*/
-	adr	r0, real_vectors
-	add	r2, r0, #1024
-	ldr	r1, =0x0c000000
-	add	r1, r1, #0x08
-vector_copy_loop:
-	ldmia	r0!, {r3-r10}
-	stmia	r1!, {r3-r10}
-	cmp	r0, r2
-	ble	vector_copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-
-	ldr	pc, _start_armboot
-
-_start_armboot:	.word start_armboot
-
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-#define INTCON (0x01c00000+0x200000)
-#define INTMSK (0x01c00000+0x20000c)
-#define LOCKTIME (0x01c00000+0x18000c)
-#define PLLCON (0x01c00000+0x180000)
-#define CLKCON (0x01c00000+0x180004)
-#define WTCON (0x01c00000+0x130000)
-cpu_init_crit:
-	/* disable watch dog */
-	ldr	r0, =WTCON
-	ldr	r1, =0x0
-	str	r1, [r0]
-
-	/*
-	 * mask all IRQs by clearing all bits in the INTMRs
-	 */
-	ldr	r1,=INTMSK
-	ldr	r0, =0x03fffeff
-	str	r0, [r1]
-
-	ldr	r1, =INTCON
-	ldr	r0, =0x05
-	str	r0, [r1]
-
-	/* Set Clock Control Register */
-	ldr	r1, =LOCKTIME
-	ldrb	r0, =800
-	strb	r0, [r1]
-
-	ldr	r1, =PLLCON
-
-#if CONFIG_S3C44B0_CLOCK_SPEED==66
-	ldr	r0, =0x34031	/* 66MHz (Quartz=11MHz) */
-#elif CONFIG_S3C44B0_CLOCK_SPEED==75
-	ldr	r0, =0x610c1 /*B2: Xtal=20mhz Fclk=75MHz  */
-#else
-# error CONFIG_S3C44B0_CLOCK_SPEED undefined
-#endif
-
-	str	r0, [r1]
-
-	ldr	r1,=CLKCON
-	ldr	r0, =0x7ff8
-	str	r0, [r1]
-
-	mov	pc, lr
-
-
-/*************************************************/
-/*	interrupt vectors	*/
-/*************************************************/
-real_vectors:
-	b	reset
-	b	undefined_instruction
-	b	software_interrupt
-	b	prefetch_abort
-	b	data_abort
-	b	not_used
-	b	irq
-	b	fiq
-
-/*************************************************/
-
-undefined_instruction:
-	mov	r6, #3
-	b	reset
-
-software_interrupt:
-	mov	r6, #4
-	b	reset
-
-prefetch_abort:
-	mov	r6, #5
-	b	reset
-
-data_abort:
-	mov	r6, #6
-	b	reset
-
-not_used:
-	/* we *should* never reach this */
-	mov	r6, #7
-	b	reset
-
-irq:
-	mov	r6, #8
-	b	reset
-
-fiq:
-	mov	r6, #9
-	b	reset