summaryrefslogtreecommitdiff
path: root/arch/arc/lib/start.S
diff options
context:
space:
mode:
authorAlexey Brodkin <abrodkin@synopsys.com>2015-02-19 18:40:58 +0300
committerAlexey Brodkin <abrodkin@synopsys.com>2015-04-03 09:47:49 +0300
commit4d93617d87285f01f450a30584520369ff3585d2 (patch)
tree8ef5ad51ed1e485b6465db58f2c4bc73840a46bd /arch/arc/lib/start.S
parentae4a351ad9e3b800e8eb55b27c302d8be256540e (diff)
arc: merge common start-up code between ARC and ARCv2
Even though ARCompact and ARCv2 are not binary compatible most of assembly instructions are used in both. With this change we'll get rid of duplicate code. Still IVTs are implemented differently so we're keeping them in separate files. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Diffstat (limited to 'arch/arc/lib/start.S')
-rw-r--r--arch/arc/lib/start.S241
1 files changed, 241 insertions, 0 deletions
diff --git a/arch/arc/lib/start.S b/arch/arc/lib/start.S
new file mode 100644
index 0000000000..39eace36a9
--- /dev/null
+++ b/arch/arc/lib/start.S
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/arcregs.h>
+
+/*
+ * Note on the LD/ST addressing modes with address register write-back
+ *
+ * LD.a same as LD.aw
+ *
+ * LD.a reg1, [reg2, x] => Pre Incr
+ * Eff Addr for load = [reg2 + x]
+ *
+ * LD.ab reg1, [reg2, x] => Post Incr
+ * Eff Addr for load = [reg2]
+ */
+
+.macro PUSH reg
+ st.a \reg, [%sp, -4]
+.endm
+
+.macro PUSHAX aux
+ lr %r9, [\aux]
+ PUSH %r9
+.endm
+
+.macro SAVE_R1_TO_R24
+ PUSH %r1
+ PUSH %r2
+ PUSH %r3
+ PUSH %r4
+ PUSH %r5
+ PUSH %r6
+ PUSH %r7
+ PUSH %r8
+ PUSH %r9
+ PUSH %r10
+ PUSH %r11
+ PUSH %r12
+ PUSH %r13
+ PUSH %r14
+ PUSH %r15
+ PUSH %r16
+ PUSH %r17
+ PUSH %r18
+ PUSH %r19
+ PUSH %r20
+ PUSH %r21
+ PUSH %r22
+ PUSH %r23
+ PUSH %r24
+.endm
+
+.macro SAVE_ALL_SYS
+ /* saving %r0 to reg->r0 in advance since we read %ecr into it */
+ st %r0, [%sp, -8]
+ lr %r0, [%ecr] /* all stack addressing is manual so far */
+ st %r0, [%sp]
+ st %sp, [%sp, -4]
+ /* now move %sp to reg->r0 position so we can do "push" automatically */
+ sub %sp, %sp, 8
+
+ SAVE_R1_TO_R24
+ PUSH %r25
+ PUSH %gp
+ PUSH %fp
+ PUSH %blink
+ PUSHAX %eret
+ PUSHAX %erstatus
+ PUSH %lp_count
+ PUSHAX %lp_end
+ PUSHAX %lp_start
+ PUSHAX %erbta
+.endm
+
+.macro SAVE_EXCEPTION_SOURCE
+#ifdef CONFIG_MMU
+ /* If MMU exists exception faulting address is loaded in EFA reg */
+ lr %r0, [%efa]
+#else
+ /* Otherwise in ERET (exception return) reg */
+ lr %r0, [%eret]
+#endif
+.endm
+
+ENTRY(_start)
+ /* Setup interrupt vector base that matches "__text_start" */
+ sr __ivt_start, [ARC_AUX_INTR_VEC_BASE]
+
+ /* Setup stack pointer */
+ mov %sp, CONFIG_SYS_INIT_SP_ADDR
+ mov %fp, %sp
+
+ /* Clear bss */
+ mov %r0, __bss_start
+ mov %r1, __bss_end
+
+clear_bss:
+ st.ab 0, [%r0, 4]
+ brlt %r0, %r1, clear_bss
+
+ /* Zero the one and only argument of "board_init_f" */
+ mov_s %r0, 0
+ j board_init_f
+ENDPROC(_start)
+
+ENTRY(memory_error)
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_memory_error
+ENDPROC(memory_error)
+
+ENTRY(instruction_error)
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_instruction_error
+ENDPROC(instruction_error)
+
+ENTRY(interrupt_handler)
+ /* Todo - save and restore CPU context when interrupts will be in use */
+ bl do_interrupt_handler
+ rtie
+ENDPROC(interrupt_handler)
+
+ENTRY(EV_MachineCheck)
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_machine_check_fault
+ENDPROC(EV_MachineCheck)
+
+ENTRY(EV_TLBMissI)
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_itlb_miss
+ENDPROC(EV_TLBMissI)
+
+ENTRY(EV_TLBMissD)
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_dtlb_miss
+ENDPROC(EV_TLBMissD)
+
+ENTRY(EV_TLBProtV)
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_tlb_prot_violation
+ENDPROC(EV_TLBProtV)
+
+ENTRY(EV_PrivilegeV)
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_privilege_violation
+ENDPROC(EV_PrivilegeV)
+
+ENTRY(EV_Trap)
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_trap
+ENDPROC(EV_Trap)
+
+ENTRY(EV_Extension)
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_extension
+ENDPROC(EV_Extension)
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r0 = start_addr_sp
+ * r1 = new__gd
+ * r2 = relocaddr
+ */
+ENTRY(relocate_code)
+ /*
+ * r0-r12 might be clobbered by C functions
+ * so we use r13-r16 for storage here
+ */
+ mov %r13, %r0 /* save addr_sp */
+ mov %r14, %r1 /* save addr of gd */
+ mov %r15, %r2 /* save addr of destination */
+
+ mov %r16, %r2 /* %r9 - relocation offset */
+ sub %r16, %r16, __image_copy_start
+
+/* Set up the stack */
+stack_setup:
+ mov %sp, %r13
+ mov %fp, %sp
+
+/* Check if monitor is loaded right in place for relocation */
+ mov %r0, __image_copy_start
+ cmp %r0, %r15 /* skip relocation if code loaded */
+ bz do_board_init_r /* in target location already */
+
+/* Copy data (__image_copy_start - __image_copy_end) to new location */
+ mov %r1, %r15
+ mov %r2, __image_copy_end
+ sub %r2, %r2, %r0 /* r3 <- amount of bytes to copy */
+ asr %r2, %r2, 2 /* r3 <- amount of words to copy */
+ mov %lp_count, %r2
+ lp copy_end
+ ld.ab %r2,[%r0,4]
+ st.ab %r2,[%r1,4]
+copy_end:
+
+/* Fix relocations related issues */
+ bl do_elf_reloc_fixups
+#ifndef CONFIG_SYS_ICACHE_OFF
+ bl invalidate_icache_all
+#endif
+#ifndef CONFIG_SYS_DCACHE_OFF
+ bl flush_dcache_all
+#endif
+
+/* Update position of intterupt vector table */
+ lr %r0, [ARC_AUX_INTR_VEC_BASE] /* Read current position */
+ add %r0, %r0, %r16 /* Update address */
+ sr %r0, [ARC_AUX_INTR_VEC_BASE] /* Write new position */
+
+do_board_init_r:
+/* Prepare for exection of "board_init_r" in relocated monitor */
+ mov %r2, board_init_r /* old address of "board_init_r()" */
+ add %r2, %r2, %r16 /* new address of "board_init_r()" */
+ mov %r0, %r14 /* 1-st parameter: gd_t */
+ mov %r1, %r15 /* 2-nd parameter: dest_addr */
+ j [%r2]
+ENDPROC(relocate_code)