summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-12-31 09:32:47 +0000
committerwdenk <wdenk>2004-12-31 09:32:47 +0000
commite2ffd59b4d93c9149de1caaa087371b0cfc512c9 (patch)
tree86cfb6e30bec1686253b0542d76f57c5d62d183a
parent400ab719c6025c176c50bcdff342384222d7424b (diff)
* Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for additional ethernet addresses. * Cleanup drivers/i82365.c - avoid duplication of code * Fix bogus "cannot span across banks" flash error message * Add support for CompactFlash for the CPC45 Board.
-rw-r--r--CHANGELOG14
-rw-r--r--MAKEALL6
-rw-r--r--board/cmc_pu2/flash.c5
-rw-r--r--board/cpc45/Makefile2
-rw-r--r--board/cpc45/cpc45.c40
-rw-r--r--board/cpc45/pd67290.c68
-rw-r--r--board/esd/cpci750/cpci750.c24
-rw-r--r--board/esd/cpci750/local.h2
-rw-r--r--board/esd/pci405/pci405.c2
-rw-r--r--board/evb64260/local.h2
-rw-r--r--board/jse/host_bridge.c2
-rw-r--r--board/pn62/pn62.c2
-rw-r--r--board/xilinx/xilinx_iic/iic_adapter.c5
-rw-r--r--common/cmd_bdinfo.c6
-rw-r--r--common/cmd_flash.c4
-rw-r--r--common/cmd_ide.c17
-rw-r--r--common/cmd_pcmcia.c13
-rw-r--r--common/cmd_universe.c50
-rw-r--r--common/environment.c3
-rw-r--r--cpu/74xx_7xx/config.mk2
-rw-r--r--cpu/mpc8220/fec.c8
-rw-r--r--cpu/mpc824x/config.mk2
-rw-r--r--cpu/mpc8xx/config.mk2
-rw-r--r--cpu/ppc4xx/440gx_enet.c24
-rw-r--r--cpu/ppc4xx/config.mk2
-rw-r--r--drivers/i82365.c472
-rw-r--r--include/asm-ppc/u-boot.h6
-rw-r--r--include/configs/Alaska8220.h1
-rw-r--r--include/configs/CATcenter.h1
-rw-r--r--include/configs/CPC45.h49
-rw-r--r--include/configs/DB64360.h1
-rw-r--r--include/configs/DB64460.h2
-rw-r--r--include/configs/G2000.h1
-rw-r--r--include/configs/HUB405.h1
-rw-r--r--include/configs/ISPAN.h2
-rw-r--r--include/configs/LANTEC.h2
-rw-r--r--include/configs/MPC8260ADS.h2
-rw-r--r--include/configs/MPC8266ADS.h2
-rw-r--r--include/configs/MPC8540ADS.h2
-rw-r--r--include/configs/MPC8541CDS.h2
-rw-r--r--include/configs/MPC8555CDS.h2
-rw-r--r--include/configs/MPC8560ADS.h2
-rw-r--r--include/configs/OCOTEA.h3
-rw-r--r--include/configs/PN62.h2
-rw-r--r--include/configs/PPChameleonEVB.h1
-rw-r--r--include/configs/RBC823.h2
-rw-r--r--include/configs/SBC8540.h8
-rw-r--r--include/configs/SBC8560.h8
-rw-r--r--include/configs/SXNI855T.h2
-rw-r--r--include/configs/XPEDITE1K.h6
-rw-r--r--include/configs/ep8260.h2
-rw-r--r--include/configs/hymod.h2
-rw-r--r--include/configs/ml300.h2
-rw-r--r--include/configs/quantum.h3
-rw-r--r--include/configs/sbc8560.h8
-rw-r--r--include/configs/stxgp3.h4
-rw-r--r--include/pcmcia/cirrus.h174
-rw-r--r--lib_ppc/board.c6
-rw-r--r--tools/env/fw_env.c3
59 files changed, 964 insertions, 129 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 425c635398..f462384cb8 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,20 @@
Changes since U-Boot 1.1.1:
======================================================================
+* Code cleanup, mostly for GCC-3.3.x
+
+* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
+ pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
+ additional ethernet addresses.
+
+* Cleanup drivers/i82365.c - avoid duplication of code
+
+* Fix bogus "cannot span across banks" flash error message
+
+* Code cleanup
+
+* Add support for CompactFlash for the CPC45 Board.
+
* Fix problems with CMC_PU2 flash driver.
* Cleanup:
diff --git a/MAKEALL b/MAKEALL
index 5b9e87f79a..77d9487632 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -99,9 +99,9 @@ LIST_8260=" \
atc cogent_mpc8260 CPU86 ep8260 \
gw8260 hymod IPHASE4539 ISPAN \
MPC8260ADS MPC8266ADS MPC8272ADS PM826 \
- PM828 ppmc8260 PQ2FADS RPXsuper \
- rsdproto sacsng sbc8260 SCM \
- TQM8260_AC TQM8260_AD TQM8260_AE ZPC1900 \
+ PM828 ppmc8260 RPXsuper rsdproto \
+ sacsng sbc8260 SCM TQM8260_AC \
+ TQM8260_AD TQM8260_AE ZPC1900 \
"
#########################################################################
diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c
index 846a2e6bf1..9983c7b78c 100644
--- a/board/cmc_pu2/flash.c
+++ b/board/cmc_pu2/flash.c
@@ -264,7 +264,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
{
vu_short *addr = (vu_short *)(info->start[0]);
int flag, prot, sect, ssect, l_sect;
- ulong start, now, last;
+ ulong now, last;
debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
@@ -336,7 +336,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
goto DONE;
reset_timer_masked ();
- last = start;
+ last = 0;
addr = (vu_short *)(info->start[l_sect]);
while ((addr[0] & 0x0080) != 0x0080) {
if ((now = get_timer_masked ()) > CFG_FLASH_ERASE_TOUT) {
@@ -432,7 +432,6 @@ printf ("write_buff 1: write_word_amd() rc=%d\n", rc);
*/
static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data)
{
- ulong start;
int flag;
vu_short *base; /* first address in flash bank */
diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile
index db5a83b70d..ccb811bd4d 100644
--- a/board/cpc45/Makefile
+++ b/board/cpc45/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
-OBJS = $(BOARD).o flash.o plx9030.o
+OBJS = $(BOARD).o flash.o plx9030.o pd67290.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c
index 92ccd42e7f..51b0085911 100644
--- a/board/cpc45/cpc45.c
+++ b/board/cpc45/cpc45.c
@@ -24,11 +24,13 @@
#include <common.h>
#include <mpc824x.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <pci.h>
#include <i2c.h>
int sysControlDisplay(int digit, uchar ascii_code);
extern void Plx9030Init(void);
+extern void SPD67290Init(void);
/* We have to clear the initial data area here. Couldn't have done it
* earlier because DRAM had not been initialized.
@@ -180,6 +182,10 @@ static struct pci_config_table pci_cpc45_config_table[] = {
pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR,
PCI_PLX9030_MEMADDR,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0E, PCI_ANY_ID,
+ pci_cfgfunc_config_device, { PCMCIA_IO_BASE,
+ PCMCIA_IO_BASE,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO }},
#endif /*CONFIG_PCI_PNP*/
{ }
};
@@ -233,3 +239,37 @@ int sysControlDisplay (int digit, /* number of digit 0..7 */
return (0);
}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+
+#ifdef CFG_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#endif
+
+int pcmcia_init(void)
+{
+ u_int rc;
+
+ debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+ rc = i82365_init();
+
+ return rc;
+}
+
+#endif /* CFG_CMD_PCMCIA */
+
+# ifdef CONFIG_IDE_LED
+void ide_led (uchar led, uchar status)
+{
+ u_char val;
+ /* We have one PCMCIA slot and use LED H4 for the IDE Interface */
+ val = readb(BCSR_BASE + 0x04);
+ if (status) { /* led on */
+ val |= B_CTRL_LED0;
+ } else {
+ val &= ~B_CTRL_LED0;
+ }
+ writeb(val, BCSR_BASE + 0x04);
+}
+# endif
diff --git a/board/cpc45/pd67290.c b/board/cpc45/pd67290.c
new file mode 100644
index 0000000000..c84fbae918
--- /dev/null
+++ b/board/cpc45/pd67290.c
@@ -0,0 +1,68 @@
+/* pd67290.c - system configuration module for SPD67290
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * (C) 2004 DENX Software Engineering, Heiko Schocher <hs@denx.de>
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+/* imports */
+#include <mpc824x.h>
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6729},
+ {}
+};
+
+/***************************************************************************
+*
+* SPD67290Init -
+*
+* RETURNS: -1 on error, 0 if OK
+*/
+
+int SPD67290Init (void)
+{
+ pci_dev_t devno;
+ int idx = 0; /* general index */
+ ulong membaseCsr; /* base address of device memory space */
+
+ /* find PD67290 device */
+ if ((devno = pci_find_devices (supported, idx++)) < 0) {
+ printf ("No PD67290 device found !!\n");
+ return -1;
+ }
+ /* - 0xfe000000 see MPC 8245 Users Manual Adress Map B */
+ membaseCsr = PCMCIA_IO_BASE - 0xfe000000;
+
+ /* set base address */
+ pci_write_config_dword (devno, PCI_BASE_ADDRESS_0, membaseCsr);
+
+ /* enable mapped memory and IO addresses */
+ pci_write_config_dword (devno,
+ PCI_COMMAND,
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_IO | PCI_COMMAND_WAIT);
+ return 0;
+}
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 56c12d7317..68f121d6bf 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -494,18 +494,18 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
#if defined (CFG_DRAM_TEST_DATA)
unsigned long long pattern[] = {
- 0xaaaaaaaaaaaaaaaa,
- 0xcccccccccccccccc,
- 0xf0f0f0f0f0f0f0f0,
- 0xff00ff00ff00ff00,
- 0xffff0000ffff0000,
- 0xffffffff00000000,
- 0x00000000ffffffff,
- 0x0000ffff0000ffff,
- 0x00ff00ff00ff00ff,
- 0x0f0f0f0f0f0f0f0f,
- 0x3333333333333333,
- 0x5555555555555555
+ 0xaaaaaaaaaaaaaaaaLL,
+ 0xccccccccccccccccLL,
+ 0xf0f0f0f0f0f0f0f0LL,
+ 0xff00ff00ff00ff00LL,
+ 0xffff0000ffff0000LL,
+ 0xffffffff00000000LL,
+ 0x00000000ffffffffLL,
+ 0x0000ffff0000ffffLL,
+ 0x00ff00ff00ff00ffLL,
+ 0x0f0f0f0f0f0f0f0fLL,
+ 0x3333333333333333LL,
+ 0x5555555555555555LL,
};
/*********************************************************************/
diff --git a/board/esd/cpci750/local.h b/board/esd/cpci750/local.h
index 47ab31e908..bca0e1ff50 100644
--- a/board/esd/cpci750/local.h
+++ b/board/esd/cpci750/local.h
@@ -76,7 +76,9 @@
#define CONFIG_ETHADDR 64:36:00:00:00:01
/* next two ethernet hwaddrs */
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 86:06:2d:7e:c6:54
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 86:06:2d:7e:c6:55
#define CONFIG_ENV_OVERWRITE
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 80d6dbb234..cb458ebc47 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -306,7 +306,7 @@ int misc_init_r (void)
/* mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00100000); */
mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00000000);
#endif
- /* printf("CCR0=%08x\n", mfspr(ccr0));*/ /* test-only */
+/* printf("CCR0=%08x\n", mfspr(ccr0)); */ /* test-only */
#endif
free(dst);
diff --git a/board/evb64260/local.h b/board/evb64260/local.h
index 6d1fb4cdab..3d9b443e7b 100644
--- a/board/evb64260/local.h
+++ b/board/evb64260/local.h
@@ -53,7 +53,9 @@
#define CONFIG_ETHADDR 00:11:22:33:44:55
/* next two ethernet hwaddrs */
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:11:22:33:44:66
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:11:22:33:44:77
#define CONFIG_ENV_OVERWRITE
diff --git a/board/jse/host_bridge.c b/board/jse/host_bridge.c
index 11c41bdada..363be97a59 100644
--- a/board/jse/host_bridge.c
+++ b/board/jse/host_bridge.c
@@ -39,8 +39,6 @@ void host_bridge_init (void)
/* The bridge chip is at a fixed location. */
pci_dev_t dev = PCI_BDF (0, 10, 0);
- int rc;
-
/* Set PCI Class code --
The primary side sees this class code at 0x08 in the
primary config space. This must be something other then a
diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c
index c0111dcd92..025224027e 100644
--- a/board/pn62/pn62.c
+++ b/board/pn62/pn62.c
@@ -145,11 +145,13 @@ int misc_init_r (void)
}
show_startup_phase (10);
+#ifdef CONFIG_HAS_ETH1
if (getenv ("eth1addr") == NULL &&
get_mac_address (1, mac, str, sizeof (str)) > 0) {
setenv ("eth1addr", str);
memcpy (gd->bd->bi_enet1addr, mac, 6);
}
+#endif /* CONFIG_HAS_ETH1 */
show_startup_phase (11);
/* Tell everybody that U-Boot is up and runnig */
diff --git a/board/xilinx/xilinx_iic/iic_adapter.c b/board/xilinx/xilinx_iic/iic_adapter.c
index 8ddba6ade2..0b7de7b997 100644
--- a/board/xilinx/xilinx_iic/iic_adapter.c
+++ b/board/xilinx/xilinx_iic/iic_adapter.c
@@ -328,8 +328,9 @@ convert_env(void)
s = getenv("E");
if (s != NULL) {
sprintf(temp, "%c%c.%c%c.%c%c.%c%c.%c%c.%c%c",
- *s++, *s++, *s++, *s++, *s++, *s++,
- *s++, *s++, *s++, *s++, *s++, *s);
+ s[0], s[1], s[ 2], s[ 3],
+ s[4], s[5], s[ 6], s[ 7],
+ s[8], s[9], s[10], s[11] );
setenv("ethaddr", temp);
setenv("E", NULL);
}
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 4c5540f253..ca834732b8 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -92,21 +92,21 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
}
-#if defined(CONFIG_ETH1ADDR)
+#if defined(CONFIG_HAS_ETH1)
puts ("\neth1addr =");
for (i=0; i<6; ++i) {
printf ("%c%02X", i ? ':' : ' ', bd->bi_enet1addr[i]);
}
#endif
-#if defined(CONFIG_ETH2ADDR)
+#if defined(CONFIG_HAS_ETH2)
puts ("\neth2addr =");
for (i=0; i<6; ++i) {
printf ("%c%02X", i ? ':' : ' ', bd->bi_enet2addr[i]);
}
#endif
-#if defined(CONFIG_ETH3ADDR)
+#if defined(CONFIG_HAS_ETH3)
puts ("\neth3addr =");
for (i=0; i<6; ++i) {
printf ("%c%02X", i ? ':' : ' ', bd->bi_enet3addr[i]);
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 5ecf88873a..b2728ab1d3 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -164,6 +164,10 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last,
sect = s_last[bank];
addr_first = (sect == s_end) ? b_end + 1: info->start[sect + 1];
(*s_count) += s_last[bank] - s_first[bank] + 1;
+ } else if (addr_first >= info->start[0] && addr_first < b_end) {
+ puts ("Error: start address not on sector boundary\n");
+ rcode = 1;
+ break;
} else if (s_last[bank] >= 0) {
puts ("Error: cannot span across banks when they are"
" mapped in reverse order\n");
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 77a0494016..851ba52c81 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -144,7 +144,7 @@ block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE];
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_IDE_LED
-#if !defined(CONFIG_KUP4K) && !defined(CONFIG_KUP4X) &&!defined(CONFIG_BMS2003)
+#if !defined(CONFIG_KUP4K) && !defined(CONFIG_KUP4X) &&!defined(CONFIG_BMS2003) &&!defined(CONFIG_CPC45)
static void ide_led (uchar led, uchar status);
#else
extern void ide_led (uchar led, uchar status);
@@ -1548,11 +1548,12 @@ static void ide_reset (void)
/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_IDE_LED) && \
- !defined(CONFIG_AMIGAONEG3SE) && \
- !defined(CONFIG_KUP4K) && \
- !defined(CONFIG_KUP4X) && \
- !defined(CONFIG_HMI10)
+#if defined(CONFIG_IDE_LED) && \
+ !defined(CONFIG_AMIGAONEG3SE)&& \
+ !defined(CONFIG_CPC45) && \
+ !defined(CONFIG_HMI10) && \
+ !defined(CONFIG_KUP4K) && \
+ !defined(CONFIG_KUP4X)
static uchar led_buffer = 0; /* Buffer for current LED status */
@@ -1578,7 +1579,6 @@ static void ide_led (uchar led, uchar status)
* ATAPI Support
*/
-
#undef ATAPI_DEBUG
#ifdef ATAPI_DEBUG
@@ -1661,7 +1661,6 @@ output_data_shorts(int dev, ushort *sect_buf, int shorts)
outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, shorts);
}
-
static void
input_data_shorts(int dev, ushort *sect_buf, int shorts)
{
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index 1387e8989f..31f2ba2f69 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -67,6 +67,8 @@
#include <asm/arch/pxa-regs.h>
#endif
+#include <asm/io.h>
+
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || \
((CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD))
@@ -540,9 +542,18 @@ static int check_ide_device (int slot)
ide_devices_found |= (1 << slot);
+#if CONFIG_CPC45
+#else
/* set I/O area in config reg -> only valid for ARGOSY D5!!! */
*((uchar *)(addr + config_base)) = 1;
-
+#endif
+#if 0
+ printf("\n## Config_base = %04x ###\n", config_base);
+ printf("Configuration Option Register: %02x @ %x\n", readb(addr + config_base), addr + config_base);
+ printf("Card Configuration and Status Register: %02x\n", readb(addr + config_base + 2));
+ printf("Pin Replacement Register Register: %02x\n", readb(addr + config_base + 4));
+ printf("Socket and Copy Register: %02x\n", readb(addr + config_base + 6));
+#endif
return (0);
}
#endif /* CONFIG_IDE_8xx_PCCARD */
diff --git a/common/cmd_universe.c b/common/cmd_universe.c
index 6388546041..a8febff02a 100644
--- a/common/cmd_universe.c
+++ b/common/cmd_universe.c
@@ -28,20 +28,8 @@
#include <universe.h>
-
#if (CONFIG_COMMANDS & CFG_CMD_UNIVERSE)
-#undef DBG
-
-#ifdef DBG
-# define UNI_DBG(fmt) printf fmt
-#else
-# define UNI_DBG(fmt)
-#endif
-
-#define UNI_PRINT(fmt) printf fmt
-
-
#define PCI_VENDOR PCI_VENDOR_ID_TUNDRA
#define PCI_DEVICE PCI_DEVICE_ID_TUNDRA_CA91C042
@@ -87,18 +75,18 @@ int universe_init(void)
val &= ~0xf;
dev->uregs = (UNIVERSE *)val;
- UNI_DBG(("UNIVERSE-Base : %p\n", dev->uregs));
+ debug ("UNIVERSE-Base : %p\n", dev->uregs);
/* check mapping */
- UNI_DBG((" Read via mapping, PCI_ID = %08X\n", readl(&dev->uregs->pci_id)));
+ debug (" Read via mapping, PCI_ID = %08X\n", readl(&dev->uregs->pci_id));
if (((PCI_DEVICE <<16) | PCI_VENDOR) != readl(&dev->uregs->pci_id)) {
- UNI_PRINT(("UNIVERSE: Cannot read PCI-ID via Mapping: %08x\n",
- readl(&dev->uregs->pci_id)));
+ printf ("UNIVERSE: Cannot read PCI-ID via Mapping: %08x\n",
+ readl(&dev->uregs->pci_id));
result = -1;
goto break_30;
}
- UNI_DBG(("PCI_BS = %08X\n", readl(&dev->uregs->pci_bs)));
+ debug ("PCI_BS = %08X\n", readl(&dev->uregs->pci_bs));
dev->pci_bs = readl(&dev->uregs->pci_bs);
@@ -154,12 +142,12 @@ int universe_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr, int si
}
if (i == 4) {
- UNI_PRINT(("universe: No Image available\n"));
+ printf ("universe: No Image available\n");
result = -1;
goto exit_10;
}
- UNI_DBG(("universe: Using image %d\n", i));
+ debug ("universe: Using image %d\n", i);
writel(pciAddr , &dev->uregs->lsi[i].bs);
writel((pciAddr + size), &dev->uregs->lsi[i].bd);
@@ -219,11 +207,11 @@ int universe_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr, int si
writel(ctl, &dev->uregs->lsi[i].ctl);
- UNI_DBG(("universe: window-addr=%p\n", &dev->uregs->lsi[i].ctl));
- UNI_DBG(("universe: pci slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->lsi[i].ctl)));
- UNI_DBG(("universe: pci slave window[%d] bs=%08x\n", i, readl(&dev->uregs->lsi[i].bs)));
- UNI_DBG(("universe: pci slave window[%d] bd=%08x\n", i, readl(&dev->uregs->lsi[i].bd)));
- UNI_DBG(("universe: pci slave window[%d] to=%08x\n", i, readl(&dev->uregs->lsi[i].to)));
+ debug ("universe: window-addr=%p\n", &dev->uregs->lsi[i].ctl);
+ debug ("universe: pci slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->lsi[i].ctl));
+ debug ("universe: pci slave window[%d] bs=%08x\n", i, readl(&dev->uregs->lsi[i].bs));
+ debug ("universe: pci slave window[%d] bd=%08x\n", i, readl(&dev->uregs->lsi[i].bd));
+ debug ("universe: pci slave window[%d] to=%08x\n", i, readl(&dev->uregs->lsi[i].to));
return 0;
@@ -251,12 +239,12 @@ int universe_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr, int si
}
if (i == 4) {
- UNI_PRINT(("universe: No Image available\n"));
+ printf ("universe: No Image available\n");
result = -1;
goto exit_10;
}
- UNI_DBG(("universe: Using image %d\n", i));
+ debug ("universe: Using image %d\n", i);
writel(vmeAddr , &dev->uregs->vsi[i].bs);
writel((vmeAddr + size), &dev->uregs->vsi[i].bd);
@@ -304,11 +292,11 @@ int universe_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr, int si
writel(ctl, &dev->uregs->vsi[i].ctl);
- UNI_DBG(("universe: window-addr=%p\n", &dev->uregs->vsi[i].ctl));
- UNI_DBG(("universe: vme slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->vsi[i].ctl)));
- UNI_DBG(("universe: vme slave window[%d] bs=%08x\n", i, readl(&dev->uregs->vsi[i].bs)));
- UNI_DBG(("universe: vme slave window[%d] bd=%08x\n", i, readl(&dev->uregs->vsi[i].bd)));
- UNI_DBG(("universe: vme slave window[%d] to=%08x\n", i, readl(&dev->uregs->vsi[i].to)));
+ debug ("universe: window-addr=%p\n", &dev->uregs->vsi[i].ctl);
+ debug ("universe: vme slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->vsi[i].ctl));
+ debug ("universe: vme slave window[%d] bs=%08x\n", i, readl(&dev->uregs->vsi[i].bs));
+ debug ("universe: vme slave window[%d] bd=%08x\n", i, readl(&dev->uregs->vsi[i].bd));
+ debug ("universe: vme slave window[%d] to=%08x\n", i, readl(&dev->uregs->vsi[i].to));
return 0;
diff --git a/common/environment.c b/common/environment.c
index 3d8493a502..61a8d245f9 100644
--- a/common/environment.c
+++ b/common/environment.c
@@ -130,6 +130,9 @@ env_t environment __PPCENV__ = {
#ifdef CONFIG_ETH2ADDR
"eth2addr=" MK_STR(CONFIG_ETH2ADDR) "\0"
#endif
+#ifdef CONFIG_ETH3ADDR
+ "eth3addr=" MK_STR(CONFIG_ETH3ADDR) "\0"
+#endif
#ifdef CONFIG_ETHPRIME
"ethprime=" CONFIG_ETHPRIME "\0"
#endif
diff --git a/cpu/74xx_7xx/config.mk b/cpu/74xx_7xx/config.mk
index d65b506730..417d99f33b 100644
--- a/cpu/74xx_7xx/config.mk
+++ b/cpu/74xx_7xx/config.mk
@@ -21,6 +21,6 @@
# MA 02111-1307 USA
#
-PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing
PLATFORM_CPPFLAGS += -DCONFIG_74xx_7xx -ffixed-r2 -ffixed-r29 -mstring
diff --git a/cpu/mpc8220/fec.c b/cpu/mpc8220/fec.c
index 1bc51cde93..96228e50d0 100644
--- a/cpu/mpc8220/fec.c
+++ b/cpu/mpc8220/fec.c
@@ -809,14 +809,14 @@ int mpc8220_fec_initialize (bd_t * bis)
{
mpc8220_fec_priv *fec;
-#ifdef CONFIG_ETH1ADDR
+#ifdef CONFIG_HAS_ETH1
mpc8220_fec_priv *fec2;
#endif
struct eth_device *dev;
char *tmp, *end;
char env_enetaddr[6];
-#ifdef CONFIG_ETH1ADDR
+#ifdef CONFIG_HAS_ETH1
char env_enet1addr[6];
#endif
int i;
@@ -826,7 +826,7 @@ int mpc8220_fec_initialize (bd_t * bis)
memset (dev, 0, sizeof *dev);
fec->eth = (ethernet_regs *) MMAP_FEC1;
-#ifdef CONFIG_ETH1ADDR
+#ifdef CONFIG_HAS_ETH1
fec2 = (mpc8220_fec_priv *) malloc (sizeof (*fec));
fec2->eth = (ethernet_regs *) MMAP_FEC2;
#endif
@@ -860,7 +860,7 @@ int mpc8220_fec_initialize (bd_t * bis)
}
mpc8220_fec_set_hwaddr (fec, env_enetaddr);
}
-#ifdef CONFIG_ETH1ADDR
+#ifdef CONFIG_HAS_ETH1
tmp = getenv ("eth1addr");
if (tmp) {
for (i = 0; i < 6; i++) {
diff --git a/cpu/mpc824x/config.mk b/cpu/mpc824x/config.mk
index 5011ddb52f..dac61d8d3e 100644
--- a/cpu/mpc824x/config.mk
+++ b/cpu/mpc824x/config.mk
@@ -21,6 +21,6 @@
# MA 02111-1307 USA
#
-PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing
PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -msoft-float
diff --git a/cpu/mpc8xx/config.mk b/cpu/mpc8xx/config.mk
index 94c68db638..bfa6625fa8 100644
--- a/cpu/mpc8xx/config.mk
+++ b/cpu/mpc8xx/config.mk
@@ -21,6 +21,6 @@
# MA 02111-1307 USA
#
-PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing
PLATFORM_CPPFLAGS += -DCONFIG_8xx -ffixed-r2 -ffixed-r29 -mstring -mcpu=860 -msoft-float
diff --git a/cpu/ppc4xx/440gx_enet.c b/cpu/ppc4xx/440gx_enet.c
index 1fa84be6e5..d1f4b76869 100644
--- a/cpu/ppc4xx/440gx_enet.c
+++ b/cpu/ppc4xx/440gx_enet.c
@@ -1176,36 +1176,37 @@ int ppc_440x_eth_initialize (bd_t * bis)
/* See if we can actually bring up the interface, otherwise, skip it */
switch (eth_num) {
+ default: /* fall through */
case 0:
if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0) {
bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
}
break;
+#ifdef CONFIG_HAS_ETH1
case 1:
if (memcmp (bis->bi_enet1addr, "\0\0\0\0\0\0", 6) == 0) {
bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
}
break;
+#endif
+#ifdef CONFIG_HAS_ETH2
case 2:
if (memcmp (bis->bi_enet2addr, "\0\0\0\0\0\0", 6) == 0) {
bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
}
break;
+#endif
+#ifdef CONFIG_HAS_ETH3
case 3:
if (memcmp (bis->bi_enet3addr, "\0\0\0\0\0\0", 6) == 0) {
bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
}
break;
- default:
- if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0) {
- bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
- continue;
- }
- break;
+#endif
}
/* Allocate device structure */
@@ -1227,26 +1228,29 @@ int ppc_440x_eth_initialize (bd_t * bis)
}
switch (eth_num) {
+ default: /* fall through */
case 0:
hw->hw_addr = 0;
memcpy (dev->enetaddr, bis->bi_enetaddr, 6);
break;
+#ifdef CONFIG_HAS_ETH1
case 1:
hw->hw_addr = 0x100;
memcpy (dev->enetaddr, bis->bi_enet1addr, 6);
break;
+#endif
+#ifdef CONFIG_HAS_ETH2
case 2:
hw->hw_addr = 0x400;
memcpy (dev->enetaddr, bis->bi_enet2addr, 6);
break;
+#endif
+#ifdef CONFIG_HAS_ETH3
case 3:
hw->hw_addr = 0x600;
memcpy (dev->enetaddr, bis->bi_enet3addr, 6);
break;
- default:
- hw->hw_addr = 0;
- memcpy (dev->enetaddr, bis->bi_enetaddr, 6);
- break;
+#endif
}
hw->devnum = eth_num;
diff --git a/cpu/ppc4xx/config.mk b/cpu/ppc4xx/config.mk
index bbbf8c2be8..119e061b89 100644
--- a/cpu/ppc4xx/config.mk
+++ b/cpu/ppc4xx/config.mk
@@ -21,6 +21,6 @@
# MA 02111-1307 USA
#
-PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing
PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -ffixed-r29 -mstring -Wa,-m405 -mcpu=405 -msoft-float
diff --git a/drivers/i82365.c b/drivers/i82365.c
index 1ac50d783a..41b8d42b4c 100644
--- a/drivers/i82365.c
+++ b/drivers/i82365.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2003
+ * (C) Copyright 2003-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -40,32 +40,65 @@
#include <pcmcia/ss.h>
#include <pcmcia/i82365.h>
-#include <pcmcia/ti113x.h>
#include <pcmcia/yenta.h>
-
-/* #define DEBUG */
+#ifdef CONFIG_CPC45
+#include <pcmcia/cirrus.h>
+#else
+#include <pcmcia/ti113x.h>
+#endif
static struct pci_device_id supported[] = {
+#ifdef CONFIG_CPC45
+ {PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6729},
+#else
{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1510},
+#endif
{0, 0}
};
#define CYCLE_TIME 120
+#ifdef CONFIG_CPC45
+extern int SPD67290Init (void);
+#endif
+
#ifdef DEBUG
static void i82365_dump_regions (pci_dev_t dev);
#endif
typedef struct socket_info_t {
- pci_dev_t dev;
- u_short bcr;
- u_char pci_lat, cb_lat, sub_bus, cache;
- u_int cb_phys;
-
- socket_cap_t cap;
- ti113x_state_t state;
+ pci_dev_t dev;
+ u_short bcr;
+ u_char pci_lat, cb_lat, sub_bus, cache;
+ u_int cb_phys;
+
+ socket_cap_t cap;
+ u_short type;
+ u_int flags;
+#ifdef CONFIG_CPC45
+ cirrus_state_t c_state;
+#else
+ ti113x_state_t state;
+#endif
} socket_info_t;
+#ifdef CONFIG_CPC45
+/* These definitions must match the pcic table! */
+typedef enum pcic_id {
+ IS_PD6710, IS_PD672X, IS_VT83C469
+} pcic_id;
+
+typedef struct pcic_t {
+ char *name;
+} pcic_t;
+
+static pcic_t pcic[] = {
+ {" Cirrus PD6710: "},
+ {" Cirrus PD672x: "},
+ {" VIA VT83C469: "},
+};
+#endif
+
static socket_info_t socket;
static socket_state_t state;
static struct pccard_mem_map mem;
@@ -91,6 +124,7 @@ static int pci_writew (socket_info_t * s, int r, u_short v)
{
return pci_write_config_word (s->dev, r, v);
}
+#ifndef CONFIG_CPC45
static int pci_readl (socket_info_t * s, int r, u_int * v)
{
return pci_read_config_dword (s->dev, r, v);
@@ -99,14 +133,61 @@ static int pci_writel (socket_info_t * s, int r, u_int v)
{
return pci_write_config_dword (s->dev, r, v);
}
+#endif /* !CONFIG_CPC45 */
+
+/*====================================================================*/
+
+#ifdef CONFIG_CPC45
+
+#define cb_readb(s) readb((s)->cb_phys + 1)
+#define cb_writeb(s, v) writeb(v, (s)->cb_phys)
+#define cb_writeb2(s, v) writeb(v, (s)->cb_phys + 1)
+#define cb_readl(s, r) readl((s)->cb_phys + (r))
+#define cb_writel(s, r, v) writel(v, (s)->cb_phys + (r))
+
+
+static u_char i365_get (socket_info_t * s, u_short reg)
+{
+ u_char val;
+
+#ifdef CONFIG_PCMCIA_SLOT_A
+ int slot = 0;
+#else
+ int slot = 1;
+#endif
+
+ val = I365_REG (slot, reg);
+
+ cb_writeb (s, val);
+ val = cb_readb (s);
+
+ debug ("i365_get slot:%x reg: %x val: %x\n", slot, reg, val);
+ return val;
+}
+
+static void i365_set (socket_info_t * s, u_short reg, u_char data)
+{
+#ifdef CONFIG_PCMCIA_SLOT_A
+ int slot = 0;
+#else
+ int slot = 1;
+#endif
+
+ u_char val = I365_REG (slot, reg);
+
+ cb_writeb (s, val);
+ cb_writeb2 (s, data);
+
+ debug ("i365_set slot:%x reg: %x data:%x\n", slot, reg, data);
+}
+
+#else /* ! CONFIG_CPC45 */
#define cb_readb(s, r) readb((s)->cb_phys + (r))
#define cb_readl(s, r) readl((s)->cb_phys + (r))
#define cb_writeb(s, r, v) writeb(v, (s)->cb_phys + (r))
#define cb_writel(s, r, v) writel(v, (s)->cb_phys + (r))
-/*====================================================================*/
-
static u_char i365_get (socket_info_t * s, u_short reg)
{
return cb_readb (s, 0x0800 + reg);
@@ -116,6 +197,7 @@ static void i365_set (socket_info_t * s, u_short reg, u_char data)
{
cb_writeb (s, 0x0800 + reg, data);
}
+#endif /* CONFIG_CPC45 */
static void i365_bset (socket_info_t * s, u_short reg, u_char mask)
{
@@ -147,6 +229,116 @@ static void i365_set_pair (socket_info_t * s, u_short reg, u_short data)
i365_set (s, reg + 1, data >> 8);
}
+#ifdef CONFIG_CPC45
+/*======================================================================
+
+ Code to save and restore global state information for Cirrus
+ PD67xx controllers, and to set and report global configuration
+ options.
+
+======================================================================*/
+
+#define flip(v,b,f) (v = ((f)<0) ? v : ((f) ? ((v)|(b)) : ((v)&(~b))))
+
+static void cirrus_get_state (socket_info_t * s)
+{
+ int i;
+ cirrus_state_t *p = &s->c_state;
+
+ p->misc1 = i365_get (s, PD67_MISC_CTL_1);
+ p->misc1 &= (PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
+ p->misc2 = i365_get (s, PD67_MISC_CTL_2);
+ for (i = 0; i < 6; i++)
+ p->timer[i] = i365_get (s, PD67_TIME_SETUP (0) + i);
+
+}
+
+static void cirrus_set_state (socket_info_t * s)
+{
+ int i;
+ u_char misc;
+ cirrus_state_t *p = &s->c_state;
+
+ misc = i365_get (s, PD67_MISC_CTL_2);
+ i365_set (s, PD67_MISC_CTL_2, p->misc2);
+ if (misc & PD67_MC2_SUSPEND)
+ udelay (50000);
+ misc = i365_get (s, PD67_MISC_CTL_1);
+ misc &= ~(PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
+ i365_set (s, PD67_MISC_CTL_1, misc | p->misc1);
+ for (i = 0; i < 6; i++)
+ i365_set (s, PD67_TIME_SETUP (0) + i, p->timer[i]);
+}
+
+static u_int cirrus_set_opts (socket_info_t * s)
+{
+ cirrus_state_t *p = &s->c_state;
+ u_int mask = 0xffff;
+
+#if DEBUG
+ char buf[200];
+
+ memset (buf, 0, 200);
+#endif
+
+ if (has_ring == -1)
+ has_ring = 1;
+ flip (p->misc2, PD67_MC2_IRQ15_RI, has_ring);
+ flip (p->misc2, PD67_MC2_DYNAMIC_MODE, dynamic_mode);
+#if DEBUG
+ if (p->misc2 & PD67_MC2_IRQ15_RI)
+ strcat (buf, " [ring]");
+ if (p->misc2 & PD67_MC2_DYNAMIC_MODE)
+ strcat (buf, " [dyn mode]");
+ if (p->misc1 & PD67_MC1_INPACK_ENA)
+ strcat (buf, " [inpack]");
+#endif
+
+ if (p->misc2 & PD67_MC2_IRQ15_RI)
+ mask &= ~0x8000;
+ if (has_led > 0) {
+#if DEBUG
+ strcat (buf, " [led]");
+#endif
+ mask &= ~0x1000;
+ }
+ if (has_dma > 0) {
+#if DEBUG
+ strcat (buf, " [dma]");
+#endif
+ mask &= ~0x0600;
+ flip (p->misc2, PD67_MC2_FREQ_BYPASS, freq_bypass);
+#if DEBUG
+ if (p->misc2 & PD67_MC2_FREQ_BYPASS)
+ strcat (buf, " [freq bypass]");
+#endif
+ }
+
+ if (setup_time >= 0)
+ p->timer[0] = p->timer[3] = setup_time;
+ if (cmd_time > 0) {
+ p->timer[1] = cmd_time;
+ p->timer[4] = cmd_time * 2 + 4;
+ }
+ if (p->timer[1] == 0) {
+ p->timer[1] = 6;
+ p->timer[4] = 16;
+ if (p->timer[0] == 0)
+ p->timer[0] = p->timer[3] = 1;
+ }
+ if (recov_time >= 0)
+ p->timer[2] = p->timer[5] = recov_time;
+
+ debug ("i82365 Opt: %s [%d/%d/%d] [%d/%d/%d]\n",
+ buf,
+ p->timer[0], p->timer[1], p->timer[2],
+ p->timer[3], p->timer[4], p->timer[5]);
+
+ return mask;
+}
+
+#else /* !CONFIG_CPC45 */
+
/*======================================================================
Code to save and restore global state information for TI 1130 and
@@ -190,6 +382,7 @@ static u_int ti113x_set_opts (socket_info_t * s)
return mask;
}
+#endif /* CONFIG_CPC45 */
/*======================================================================
@@ -213,8 +406,10 @@ static void cb_get_state (socket_info_t * s)
static void cb_set_state (socket_info_t * s)
{
+#ifndef CONFIG_CPC45
pci_writel (s, CB_LEGACY_MODE_BASE, 0);
pci_writel (s, PCI_BASE_ADDRESS_0, s->cb_phys);
+#endif
pci_writew (s, PCI_COMMAND, CMD_DFLT);
pci_writeb (s, PCI_CACHE_LINE_SIZE, s->cache);
pci_writeb (s, PCI_LATENCY_TIMER, s->pci_lat);
@@ -226,12 +421,14 @@ static void cb_set_state (socket_info_t * s)
static void cb_set_opts (socket_info_t * s)
{
+#ifndef CONFIG_CPC45
if (s->cache == 0)
s->cache = 8;
if (s->pci_lat == 0)
s->pci_lat = 0xa8;
if (s->cb_lat == 0)
s->cb_lat = 0xb0;
+#endif
}
/*======================================================================
@@ -245,9 +442,71 @@ static int cb_set_power (socket_info_t * s, socket_state_t * state)
{
u_int reg = 0;
+#ifdef CONFIG_CPC45
+
+ if ((state->Vcc == 0) && (state->Vpp == 0)) {
+ u_char power, vcc, vpp;
+
+ power = i365_get (s, I365_POWER);
+ state->flags |= (power & I365_PWR_AUTO) ? SS_PWR_AUTO : 0;
+ state->flags |= (power & I365_PWR_OUT) ? SS_OUTPUT_ENA : 0;
+ vcc = power & I365_VCC_MASK;
+ vpp = power & I365_VPP1_MASK;
+ state->Vcc = state->Vpp = 0;
+ if (i365_get (s, PD67_MISC_CTL_1) & PD67_MC1_VCC_3V) {
+ if (power & I365_VCC_5V)
+ state->Vcc = 33;
+ if (vpp == I365_VPP1_5V)
+ state->Vpp = 33;
+ } else {
+ if (power & I365_VCC_5V)
+ state->Vcc = 50;
+ if (vpp == I365_VPP1_5V)
+ state->Vpp = 50;
+ }
+ if (power == I365_VPP1_12V)
+ state->Vpp = 120;
+ printf ("POWER Vcc:%d Vpp: %d\n", state->Vcc, state->Vpp);
+ }
+
+ reg = I365_PWR_NORESET;
+ if (state->flags & SS_PWR_AUTO)
+ reg |= I365_PWR_AUTO;
+ if (state->flags & SS_OUTPUT_ENA)
+ reg |= I365_PWR_OUT;
+ if (state->Vpp != 0) {
+ if (state->Vpp == 120) {
+ reg |= I365_VPP1_12V;
+ puts (" 12V card found: ");
+ } else if (state->Vpp == state->Vcc) {
+ reg |= I365_VPP1_5V;
+ puts (" 5V card found: ");
+ } else {
+ puts (" power not found: ");
+ return -1;
+ }
+ }
+ if (state->Vcc != 0) {
+ reg |= I365_VCC_5V;
+ if (state->Vcc == 33) {
+ puts (" 3.3V card found: ");
+ i365_bset (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
+ } else if (state->Vcc == 50) {
+ puts (" 5V card found: ");
+ i365_bclr (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
+ } else {
+ puts (" power not found: ");
+ return -1;
+ }
+ }
+ if (reg != i365_get (s, I365_POWER))
+ i365_set (s, I365_POWER, reg);
+
+#else /* ! CONFIG_CPC45 */
+
/* restart card voltage detection if it seems appropriate */
if ((state->Vcc == 0) && (state->Vpp == 0) &&
- !(cb_readl (s, CB_SOCKET_STATE) & CB_SS_VSENSE))
+ !(cb_readl (s, CB_SOCKET_STATE) & CB_SS_VSENSE))
cb_writel (s, CB_SOCKET_FORCE, CB_SF_CVSTEST);
switch (state->Vcc) {
case 0:
@@ -279,6 +538,7 @@ static int cb_set_power (socket_info_t * s, socket_state_t * state)
}
if (reg != cb_readl (s, CB_SOCKET_CONTROL))
cb_writel (s, CB_SOCKET_CONTROL, reg);
+#endif /* CONFIG_CPC45 */
return 0;
}
@@ -290,7 +550,11 @@ static int cb_set_power (socket_info_t * s, socket_state_t * state)
static void get_bridge_state (socket_info_t * s)
{
+#ifdef CONFIG_CPC45
+ cirrus_get_state (s);
+#else
ti113x_get_state (s);
+#endif
cb_get_state (s);
}
@@ -299,12 +563,20 @@ static void set_bridge_state (socket_info_t * s)
cb_set_state (s);
i365_set (s, I365_GBLCTL, 0x00);
i365_set (s, I365_GENCTL, 0x00);
+#ifdef CONFIG_CPC45
+ cirrus_set_state (s);
+#else
ti113x_set_state (s);
+#endif
}
static void set_bridge_opts (socket_info_t * s)
{
+#ifdef CONFIG_CPC45
+ cirrus_set_opts (s);
+#else
ti113x_set_opts (s);
+#endif
cb_set_opts (s);
}
@@ -314,6 +586,12 @@ static int i365_get_status (socket_info_t * s, u_int * value)
{
u_int status;
+#ifdef CONFIG_CPC45
+ u_char val;
+ u_char power, vcc, vpp;
+#endif
+
+ status = i365_get (s, I365_IDENT);
status = i365_get (s, I365_STATUS);
*value = ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0;
if (i365_get (s, I365_INTCTL) & I365_PC_IOCARD) {
@@ -326,6 +604,71 @@ static int i365_get_status (socket_info_t * s, u_int * value)
*value |= (status & I365_CS_READY) ? SS_READY : 0;
*value |= (status & I365_CS_POWERON) ? SS_POWERON : 0;
+#ifdef CONFIG_CPC45
+ /* Check for Cirrus CL-PD67xx chips */
+ i365_set (s, PD67_CHIP_INFO, 0);
+ val = i365_get (s, PD67_CHIP_INFO);
+ s->type = -1;
+ if ((val & PD67_INFO_CHIP_ID) == PD67_INFO_CHIP_ID) {
+ val = i365_get (s, PD67_CHIP_INFO);
+ if ((val & PD67_INFO_CHIP_ID) == 0) {
+ s->type =
+ (val & PD67_INFO_SLOTS) ? IS_PD672X :
+ IS_PD6710;
+ i365_set (s, PD67_EXT_INDEX, 0xe5);
+ if (i365_get (s, PD67_EXT_INDEX) != 0xe5)
+ s->type = IS_VT83C469;
+ }
+ } else {
+ printf ("no Cirrus Chip found\n");
+ *value = 0;
+ return -1;
+ }
+
+ i365_bset (s, I365_POWER, I365_VCC_5V);
+ power = i365_get (s, I365_POWER);
+ state.flags |= (power & I365_PWR_AUTO) ? SS_PWR_AUTO : 0;
+ state.flags |= (power & I365_PWR_OUT) ? SS_OUTPUT_ENA : 0;
+ vcc = power & I365_VCC_MASK;
+ vpp = power & I365_VPP1_MASK;
+ state.Vcc = state.Vpp = 0;
+ if (i365_get (s, PD67_MISC_CTL_1) & PD67_MC1_VCC_3V) {
+ if (power & I365_VCC_5V)
+ state.Vcc = 33;
+ if (vpp == I365_VPP1_5V)
+ state.Vpp = 33;
+ } else {
+ if (power & I365_VCC_5V)
+ state.Vcc = 50;
+ if (vpp == I365_VPP1_5V)
+ state.Vpp = 50;
+ }
+ if (power == I365_VPP1_12V)
+ state.Vpp = 120;
+
+ /* IO card, RESET flags, IO interrupt */
+ power = i365_get (s, I365_INTCTL);
+ state.flags |= (power & I365_PC_RESET) ? 0 : SS_RESET;
+ if (power & I365_PC_IOCARD)
+ state.flags |= SS_IOCARD;
+ state.io_irq = power & I365_IRQ_MASK;
+
+ /* Card status change mask */
+ power = i365_get (s, I365_CSCINT);
+ state.csc_mask = (power & I365_CSC_DETECT) ? SS_DETECT : 0;
+ if (state.flags & SS_IOCARD)
+ state.csc_mask |= (power & I365_CSC_STSCHG) ? SS_STSCHG : 0;
+ else {
+ state.csc_mask |= (power & I365_CSC_BVD1) ? SS_BATDEAD : 0;
+ state.csc_mask |= (power & I365_CSC_BVD2) ? SS_BATWARN : 0;
+ state.csc_mask |= (power & I365_CSC_READY) ? SS_READY : 0;
+ }
+ debug ("i82365: GetStatus(0) = flags %#3.3x, Vcc %d, Vpp %d, "
+ "io_irq %d, csc_mask %#2.2x\n", state.flags,
+ state.Vcc, state.Vpp, state.io_irq, state.csc_mask);
+
+#else /* !CONFIG_CPC45 */
+
status = cb_readl (s, CB_SOCKET_STATE);
*value |= (status & CB_SS_32BIT) ? SS_CARDBUS : 0;
*value |= (status & CB_SS_3VCARD) ? SS_3VCARD : 0;
@@ -334,7 +677,7 @@ static int i365_get_status (socket_info_t * s, u_int * value)
/* For now, ignore cards with unsupported voltage keys */
if (*value & SS_XVCARD)
*value &= ~(SS_DETECT | SS_3VCARD | SS_XVCARD);
-
+#endif /* CONFIG_CPC45 */
return 0;
} /* i365_get_status */
@@ -350,6 +693,31 @@ static int i365_set_socket (socket_info_t * s, socket_state_t * state)
reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0;
i365_set (s, I365_INTCTL, reg);
+#ifdef CONFIG_CPC45
+ cb_set_power (s, state);
+
+#if 0
+ /* Card status change interrupt mask */
+ reg = s->cs_irq << 4;
+ if (state->csc_mask & SS_DETECT)
+ reg |= I365_CSC_DETECT;
+ if (state->flags & SS_IOCARD) {
+ if (state->csc_mask & SS_STSCHG)
+ reg |= I365_CSC_STSCHG;
+ } else {
+ if (state->csc_mask & SS_BATDEAD)
+ reg |= I365_CSC_BVD1;
+ if (state->csc_mask & SS_BATWARN)
+ reg |= I365_CSC_BVD2;
+ if (state->csc_mask & SS_READY)
+ reg |= I365_CSC_READY;
+ }
+ i365_set (s, I365_CSCINT, reg);
+ i365_get (s, I365_CSC);
+#endif /* 0 */
+
+#else /* !CONFIG_CPC45 */
+
reg = I365_PWR_NORESET;
if (state->flags & SS_PWR_AUTO)
reg |= I365_PWR_AUTO;
@@ -361,6 +729,7 @@ static int i365_set_socket (socket_info_t * s, socket_state_t * state)
if (reg != i365_get (s, I365_POWER))
i365_set (s, I365_POWER, reg);
+#endif /* CONFIG_CPC45 */
return 0;
} /* i365_set_socket */
@@ -372,6 +741,10 @@ static int i365_set_mem_map (socket_info_t * s, struct pccard_mem_map *mem)
u_short base, i;
u_char map;
+ debug ("i82365: SetMemMap(%d, %#2.2x, %d ns, %#5.5lx-%#5.5lx, %#5.5x)\n",
+ mem->map, mem->flags, mem->speed,
+ mem->sys_start, mem->sys_stop, mem->card_start);
+
map = mem->map;
if ((map > 4) ||
(mem->card_start > 0x3ffffff) ||
@@ -411,13 +784,23 @@ static int i365_set_mem_map (socket_info_t * s, struct pccard_mem_map *mem)
}
i365_set_pair (s, base + I365_W_STOP, i);
+#ifdef CONFIG_CPC45
+ i = 0;
+#else
i = ((mem->card_start - mem->sys_start) >> 12) & 0x3fff;
+#endif
if (mem->flags & MAP_WRPROT)
i |= I365_MEM_WRPROT;
if (mem->flags & MAP_ATTRIB)
i |= I365_MEM_REG;
i365_set_pair (s, base + I365_W_OFF, i);
+#ifdef CONFIG_CPC45
+ /* set System Memory map Upper Adress */
+ i365_set(s, PD67_EXT_INDEX, PD67_MEM_PAGE(map));
+ i365_set(s, PD67_EXT_DATA, ((mem->sys_start >> 24) & 0xff));
+#endif
+
/* Turn on the window if necessary */
if (mem->flags & MAP_ACTIVE)
i365_bset (s, I365_ADDRWIN, I365_ENA_MEM (map));
@@ -431,7 +814,7 @@ static int i365_set_io_map (socket_info_t * s, struct pccard_io_map *io)
map = io->map;
/* comment out: comparison is always false due to limited range of data type */
if ((map > 1) || /* (io->start > 0xffff) || (io->stop > 0xffff) || */
- (io->stop < io->start))
+ (io->stop < io->start))
return -1;
/* Turn off the window before changing anything */
if (i365_get (s, I365_ADDRWIN) & I365_ENA_IO (map))
@@ -461,19 +844,37 @@ int i82365_init (void)
u_int val;
int i;
+#ifdef CONFIG_CPC45
+ if (SPD67290Init () != 0)
+ return 1;
+#endif
if ((socket.dev = pci_find_devices (supported, 0)) < 0) {
/* Controller not found */
return 1;
}
+ debug ("i82365 Device Found!\n");
pci_read_config_dword (socket.dev, PCI_BASE_ADDRESS_0, &socket.cb_phys);
socket.cb_phys &= ~0xf;
+#ifdef CONFIG_CPC45
+ /* + 0xfe000000 see MPC 8245 Users Manual Adress Map B */
+ socket.cb_phys += 0xfe000000;
+#endif
+
get_bridge_state (&socket);
set_bridge_opts (&socket);
- i365_get_status (&socket, &val);
+ i = i365_get_status (&socket, &val);
+#ifdef CONFIG_CPC45
+ if (i > -1) {
+ puts (pcic[socket.type].name);
+ } else {
+ printf ("i82365: Controller not found.\n");
+ return 1;
+ }
+#else /* !CONFIG_CPC45 */
if (val & SS_DETECT) {
if (val & SS_3VCARD) {
state.Vcc = state.Vpp = 33;
@@ -482,17 +883,23 @@ int i82365_init (void)
state.Vcc = state.Vpp = 50;
puts (" 5.0V card found: ");
} else {
- printf ("i82365: unsupported voltage key\n");
+ puts ("i82365: unsupported voltage key\n");
state.Vcc = state.Vpp = 0;
}
} else {
/* No card inserted */
+ puts ("No card\n");
return 1;
}
+#endif /* CONFIG_CPC45 */
+#ifdef CONFIG_CPC45
+ state.flags |= SS_OUTPUT_ENA;
+#else
state.flags = SS_IOCARD | SS_OUTPUT_ENA;
state.csc_mask = 0;
state.io_irq = 0;
+#endif
i365_set_socket (&socket, &state);
@@ -504,8 +911,10 @@ int i82365_init (void)
if (i == 0) {
/* PC Card not ready for data transfer */
+ puts ("i82365 PC Card not ready for data transfer\n");
return 1;
}
+ debug (" PC Card ready for data transfer: ");
mem.map = 0;
mem.flags = MAP_ATTRIB | MAP_ACTIVE;
@@ -513,17 +922,28 @@ int i82365_init (void)
mem.sys_start = CFG_PCMCIA_MEM_ADDR;
mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
mem.card_start = 0;
+ i365_set_mem_map (&socket, &mem);
+#ifdef CONFIG_CPC45
+ mem.map = 1;
+ mem.flags = MAP_ACTIVE;
+ mem.speed = 300;
+ mem.sys_start = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE;
+ mem.sys_stop = CFG_PCMCIA_MEM_ADDR + (2 * CFG_PCMCIA_MEM_SIZE) - 1;
+ mem.card_start = 0;
i365_set_mem_map (&socket, &mem);
+#else /* !CONFIG_CPC45 */
+
io.map = 0;
io.flags = MAP_AUTOSZ | MAP_ACTIVE;
io.speed = 0;
io.start = 0x0100;
io.stop = 0x010F;
-
i365_set_io_map (&socket, &io);
+#endif /* CONFIG_CPC45 */
+
#ifdef DEBUG
i82365_dump_regions (socket.dev);
#endif
@@ -550,8 +970,18 @@ void i82365_exit (void)
i365_set_mem_map (&socket, &mem);
- socket.state.sysctl &= 0xFFFF00FF;
+#ifdef CONFIG_CPC45
+ mem.map = 1;
+ mem.flags = 0;
+ mem.speed = 0;
+ mem.sys_start = 0;
+ mem.sys_stop = 0x1000;
+ mem.card_start = 0;
+ i365_set_mem_map (&socket, &mem);
+#else /* !CONFIG_CPC45 */
+ socket.state.sysctl &= 0xFFFF00FF;
+#endif
state.Vcc = state.Vpp = 0;
i365_set_socket (&socket, &state);
@@ -567,7 +997,7 @@ void i82365_exit (void)
static void i82365_dump_regions (pci_dev_t dev)
{
u_int tmp[2];
- u_int *mem = (void *) sock.cb_phys;
+ u_int *mem = (void *) socket.cb_phys;
u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 72eabb495d..f8282d40c9 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -86,15 +86,15 @@ typedef struct bd_info {
hymod_conf_t bi_hymod_conf; /* hymod configuration information */
#endif
-#if defined(CONFIG_ETH1ADDR)
+#ifdef CONFIG_HAS_ETH1
/* second onboard ethernet port */
unsigned char bi_enet1addr[6];
#endif
-#if defined(CONFIG_ETH2ADDR)
+#ifdef CONFIG_HAS_ETH2
/* third onboard ethernet port */
unsigned char bi_enet2addr[6];
#endif
-#if defined(CONFIG_ETH3ADDR)
+#ifdef CONFIG_HAS_ETH3
unsigned char bi_enet3addr[6];
#endif
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 5cf2a04119..5ab6fe63f8 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -106,6 +106,7 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTARGS "root=/dev/ram rw"
#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61
#define CONFIG_IPADDR 192.162.1.2
#define CONFIG_NETMASK 255.255.255.0
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 15420474df..d64dd2a17e 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -98,6 +98,7 @@
/* Ethernet stuff */
#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
#define CONFIG_ETHADDR 00:50:C2:1E:AF:FE
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:50:C2:1E:AF:FD
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index 5a00133775..8de981981d 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -50,8 +50,6 @@
#define CONFIG_BAUDRATE 9600
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
#define CONFIG_BOOTDELAY 5
@@ -63,7 +61,10 @@
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_EEPROM | \
+ CFG_CMD_FAT | \
+ CFG_CMD_FLASH | \
CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
CFG_CMD_PCI | \
CFG_CMD_SDRAM )
@@ -344,7 +345,7 @@
#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */
#define BCSR_BASE 0x80600000 /* board control / status registers */
#define DISPLAY_BASE 0x80600040 /* DISPLAY base */
-#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */
+#define PCMCIA_MEM_BASE 0x83000000 /* PCMCIA memory window base */
#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */
@@ -464,4 +465,46 @@
#define PCI_ENET0_MEMADDR 0x82000000
#define PCI_PLX9030_IOADDR 0x82100000
#define PCI_PLX9030_MEMADDR 0x82100000
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_I82365
+
+#define CFG_PCMCIA_MEM_ADDR PCMCIA_MEM_BASE
+#define CFG_PCMCIA_MEM_SIZE 0x1000
+
+#define CONFIG_PCMCIA_SLOT_A
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_RESET /* reset for IDE not supported */
+#define CONFIG_IDE_LED /* LED for IDE is supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+#define CONFIG_HMI10
+
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
+
+#define CFG_ATA_DATA_OFFSET CFG_PCMCIA_MEM_SIZE
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET CFG_PCMCIA_MEM_SIZE
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x400)
+
+#define CONFIG_DOS_PARTITION
+
#endif /* __CONFIG_H */
diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h
index e318b274a7..d6ce8a873b 100644
--- a/include/configs/DB64360.h
+++ b/include/configs/DB64360.h
@@ -105,6 +105,7 @@
/* first ethernet */
#define CONFIG_ETHADDR 64:36:00:00:00:01
/* next two ethernet hwaddrs */
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 64:36:00:00:00:02
/* in the atlantis 64360 we have only 2 ETH port on the board,
if we use PCI it has its own MAC addr */
diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h
index e58b63a458..fb0248102f 100644
--- a/include/configs/DB64460.h
+++ b/include/configs/DB64460.h
@@ -43,7 +43,9 @@
#define __LOCAL_H
#define CONFIG_ETHADDR 64:46:00:00:00:01
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 64:46:00:00:00:02
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 64:46:00:00:00:03
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index df4ed3902f..af96c7c70c 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -164,6 +164,7 @@
/* adding Ethernet setting: FTS OUI 00:11:0B */
/*----------------------------------------------------------------------------*/
#define CONFIG_ETHADDR 00:11:0B:00:00:01
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:11:0B:00:00:02
#define CONFIG_IPADDR 10.48.8.178
#define CONFIG_IP1ADDR 10.48.8.188
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 57212e0f69..2d7cf2f2e2 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -126,6 +126,7 @@
/* Ethernet stuff */
#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
#define CONFIG_ETHADDR 00:50:C2:1E:AF:FE
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:50:C2:1E:AF:FD
/*-----------------------------------------------------------------------
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
index 9ec1c0834b..8aa18caa7e 100644
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -177,8 +177,10 @@
/* Environment is in flash, there is little space left in Serial EEPROM */
#define CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
/*-----------------------------------------------------------------------
* Hard Reset Configuration Words
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
index 17402f0c9f..91011be367 100644
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -90,6 +90,7 @@
& ~CFG_CMD_DTT \
& ~CFG_CMD_EEPROM \
& ~CFG_CMD_ELF \
+ & ~CFG_CMD_EXT2 \
& ~CFG_CMD_FDC \
& ~CFG_CMD_FDOS \
& ~CFG_CMD_HWFLOW \
@@ -106,6 +107,7 @@
& ~CFG_CMD_REISER \
& ~CFG_CMD_SCSI \
& ~CFG_CMD_SPI \
+ & ~CFG_CMD_UNIVERSE\
& ~CFG_CMD_USB \
& ~CFG_CMD_VFD \
& ~CFG_CMD_XIMG )
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 0d5b05a803..6b7bdda77d 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -185,6 +185,7 @@
CFG_CMD_DTT | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
+ CFG_CMD_EXT2 | \
CFG_CMD_FAT | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
@@ -198,6 +199,7 @@
CFG_CMD_REISER | \
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
+ CFG_CMD_UNIVERSE | \
CFG_CMD_USB | \
CFG_CMD_VFD | \
CFG_CMD_XIMG
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index a4018f8ced..88efd956d7 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -155,6 +155,7 @@
CFG_CMD_DTT | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
+ CFG_CMD_EXT2 | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
CFG_CMD_HWFLOW | \
@@ -168,6 +169,7 @@
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
CFG_CMD_VFD | \
+ CFG_CMD_UNIVERSE | \
CFG_CMD_USB | \
CFG_CMD_XIMG ) )
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index a53b963edc..874e962d1e 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -458,7 +458,9 @@
/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#endif
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 9824241408..d4cba338b3 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -415,7 +415,9 @@ extern unsigned long get_clock_freq(void);
/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#endif
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 6b4191ef96..49518d8583 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -415,7 +415,9 @@ extern unsigned long get_clock_freq(void);
/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#endif
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 2a31dd7d93..d58e6a7059 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -504,7 +504,9 @@
/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#endif
diff --git a/include/configs/OCOTEA.h b/include/configs/OCOTEA.h
index 6f8fd1d55c..f69ab1b631 100644
--- a/include/configs/OCOTEA.h
+++ b/include/configs/OCOTEA.h
@@ -154,8 +154,11 @@
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 10.1.2.3
#define CONFIG_ETHADDR 00:04:AC:E3:28:8A
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:04:AC:E3:28:8B
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:04:AC:E3:28:8C
+#define CONFIG_HAS_ETH3
#define CONFIG_ETH3ADDR 00:04:AC:E3:28:8D
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_SERVERIP 10.1.2.2
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index c58e990a19..5f748a0366 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -102,6 +102,8 @@
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */
+#define CONFIG_HAS_ETH1 1 /* add support for eth1addr */
+
#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */
/*
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 03020f2890..2ffe89f8c6 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -92,6 +92,7 @@
/* Ethernet stuff */
#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
#define CONFIG_ETHADDR 00:50:c2:1e:af:fe
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:50:c2:1e:af:fd
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index 3592290d50..4623dbb887 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -98,6 +98,7 @@
~CFG_CMD_BSP & \
~CFG_CMD_DATE & \
~CFG_CMD_DTT & \
+ ~CFG_CMD_EXT2 & \
~CFG_CMD_FDC & \
~CFG_CMD_FDOS & \
~CFG_CMD_HWFLOW & \
@@ -113,6 +114,7 @@
~CFG_CMD_SCSI & \
~CFG_CMD_SETGETDCR & \
~CFG_CMD_SPI & \
+ ~CFG_CMD_UNIVERSE & \
~CFG_CMD_USB & \
~CFG_CMD_VFD & \
~CFG_CMD_XIMG )
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 3a09de91a7..60561eb22b 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -400,9 +400,11 @@
/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a
- #define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b
- #define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c
+# define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a
+# define CONFIG_HAS_ETH1
+# define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b
+# define CONFIG_HAS_ETH2
+# define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c
#endif
#define CONFIG_SERVERIP YourServerIP
diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h
index 8e3c3923d3..6bd0abe763 100644
--- a/include/configs/SBC8560.h
+++ b/include/configs/SBC8560.h
@@ -388,9 +388,11 @@
/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a
- #define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b
- #define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c
+# define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a
+# define CONFIG_HAS_ETH1
+# define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b
+# define CONFIG_HAS_ETH2
+# define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c
#endif
#define CONFIG_SERVERIP YourServerIP
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index d6fa798075..195c036bb9 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -81,6 +81,8 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
+#define CONFIG_HAS_ETH1
+
/*-----------------------------------------------------------------------
* Definitions for status LED
*/
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 3cc4ff41a1..023570077e 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -177,6 +177,10 @@ extern void out32(unsigned int, unsigned long);
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */
+#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */
+
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_PCI | \
CFG_CMD_IRQ | \
@@ -186,7 +190,7 @@ extern void out32(unsigned int, unsigned long);
CFG_CMD_EEPROM | \
CFG_CMD_PING | \
CFG_CMD_ELF | \
- CFG_CMD_MII | \
+ CFG_CMD_MII | \
CFG_CMD_DIAG | \
CFG_CMD_FAT )
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index a17d035300..1f9de350c8 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -277,6 +277,7 @@
CFG_CMD_DOC | \
CFG_CMD_DTT | \
CFG_CMD_EEPROM | \
+ CFG_CMD_EXT2 | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
CFG_CMD_HWFLOW | \
@@ -291,6 +292,7 @@
CFG_CMD_REISER | \
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
+ CFG_CMD_UNIVERSE| \
CFG_CMD_USB | \
CFG_CMD_VFD | \
CFG_CMD_XIMG ) )
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 6f19909614..90d6b25bdb 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -177,6 +177,7 @@
CFG_CMD_BEDBUG | \
CFG_CMD_BMP | \
CFG_CMD_DOC | \
+ CFG_CMD_EXT2 | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
CFG_CMD_FPGA | \
@@ -191,6 +192,7 @@
CFG_CMD_REISER | \
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
+ CFG_CMD_UNIVERSE| \
CFG_CMD_VFD | \
CFG_CMD_XIMG ) )
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index d36e3c725a..abad059ccf 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -58,7 +58,7 @@
#define CONFIG_SYSTEMACE 1
#define CONFIG_DOS_PARTITION 1
-#define CFG_SYSTEMACE_BASE XPAR_SYSACE_0_BASEADDR
+#define CFG_SYSTEMACE_BASE XPAR_OPB_SYSACE_0_BASEADDR
#define CFG_SYSTEMACE_WIDTH XPAR_XSYSACE_MEM_WIDTH
#define CFG_ENV_IS_IN_EEPROM 1 /* environment is in EEPROM */
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index d0ee7295b9..9140efb87a 100644
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -199,7 +199,8 @@
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x00F40000 /* Offset of Environment Sector absolute address 0xfff40000*/
-#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
/* Address and size of Redundant Environment Sector */
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index cf5ef63d1a..8cf9eeb3d4 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -382,9 +382,11 @@
/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_ETHADDR 00:01:af:07:9b:8a
- #define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
- #define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
+# define CONFIG_ETHADDR 00:01:af:07:9b:8a
+# define CONFIG_HAS_ETH1
+# define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
+# define CONFIG_HAS_ETH2
+# define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
#endif
#define CONFIG_SERVERIP 192.168.0.131
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index f5b4836d70..e9261db30a 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -368,8 +368,10 @@
/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a
+#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:e0:0c:07:9b:8c
#endif
diff --git a/include/pcmcia/cirrus.h b/include/pcmcia/cirrus.h
new file mode 100644
index 0000000000..f53b85a323
--- /dev/null
+++ b/include/pcmcia/cirrus.h
@@ -0,0 +1,174 @@
+/*
+ * cirrus.h 1.4 1999/10/25 20:03:34
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in which
+ * case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use
+ * your version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#ifndef _LINUX_CIRRUS_H
+#define _LINUX_CIRRUS_H
+
+#ifndef PCI_VENDOR_ID_CIRRUS
+#define PCI_VENDOR_ID_CIRRUS 0x1013
+#endif
+#ifndef PCI_DEVICE_ID_CIRRUS_6729
+#define PCI_DEVICE_ID_CIRRUS_6729 0x1100
+#endif
+#ifndef PCI_DEVICE_ID_CIRRUS_6832
+#define PCI_DEVICE_ID_CIRRUS_6832 0x1110
+#endif
+
+#define PD67_MISC_CTL_1 0x16 /* Misc control 1 */
+#define PD67_FIFO_CTL 0x17 /* FIFO control */
+#define PD67_MISC_CTL_2 0x1E /* Misc control 2 */
+#define PD67_CHIP_INFO 0x1f /* Chip information */
+#define PD67_ATA_CTL 0x026 /* 6730: ATA control */
+#define PD67_EXT_INDEX 0x2e /* Extension index */
+#define PD67_EXT_DATA 0x2f /* Extension data */
+
+/* PD6722 extension registers -- indexed in PD67_EXT_INDEX */
+#define PD67_DATA_MASK0 0x01 /* Data mask 0 */
+#define PD67_DATA_MASK1 0x02 /* Data mask 1 */
+#define PD67_DMA_CTL 0x03 /* DMA control */
+
+/* PD6730 extension registers -- indexed in PD67_EXT_INDEX */
+#define PD67_EXT_CTL_1 0x03 /* Extension control 1 */
+#define PD67_MEM_PAGE(n) ((n)+5) /* PCI window bits 31:24 */
+#define PD67_EXTERN_DATA 0x0a
+#define PD67_MISC_CTL_3 0x25
+#define PD67_SMB_PWR_CTL 0x26
+
+/* I/O window address offset */
+#define PD67_IO_OFF(w) (0x36+((w)<<1))
+
+/* Timing register sets */
+#define PD67_TIME_SETUP(n) (0x3a + 3*(n))
+#define PD67_TIME_CMD(n) (0x3b + 3*(n))
+#define PD67_TIME_RECOV(n) (0x3c + 3*(n))
+
+/* Flags for PD67_MISC_CTL_1 */
+#define PD67_MC1_5V_DET 0x01 /* 5v detect */
+#define PD67_MC1_MEDIA_ENA 0x01 /* 6730: Multimedia enable */
+#define PD67_MC1_VCC_3V 0x02 /* 3.3v Vcc */
+#define PD67_MC1_PULSE_MGMT 0x04
+#define PD67_MC1_PULSE_IRQ 0x08
+#define PD67_MC1_SPKR_ENA 0x10
+#define PD67_MC1_INPACK_ENA 0x80
+
+/* Flags for PD67_FIFO_CTL */
+#define PD67_FIFO_EMPTY 0x80
+
+/* Flags for PD67_MISC_CTL_2 */
+#define PD67_MC2_FREQ_BYPASS 0x01
+#define PD67_MC2_DYNAMIC_MODE 0x02
+#define PD67_MC2_SUSPEND 0x04
+#define PD67_MC2_5V_CORE 0x08
+#define PD67_MC2_LED_ENA 0x10 /* IRQ 12 is LED enable */
+#define PD67_MC2_FAST_PCI 0x10 /* 6729: PCI bus > 25 MHz */
+#define PD67_MC2_3STATE_BIT7 0x20 /* Floppy change bit */
+#define PD67_MC2_DMA_MODE 0x40
+#define PD67_MC2_IRQ15_RI 0x80 /* IRQ 15 is ring enable */
+
+/* Flags for PD67_CHIP_INFO */
+#define PD67_INFO_SLOTS 0x20 /* 0 = 1 slot, 1 = 2 slots */
+#define PD67_INFO_CHIP_ID 0xc0
+#define PD67_INFO_REV 0x1c
+
+/* Fields in PD67_TIME_* registers */
+#define PD67_TIME_SCALE 0xc0
+#define PD67_TIME_SCALE_1 0x00
+#define PD67_TIME_SCALE_16 0x40
+#define PD67_TIME_SCALE_256 0x80
+#define PD67_TIME_SCALE_4096 0xc0
+#define PD67_TIME_MULT 0x3f
+
+/* Fields in PD67_DMA_CTL */
+#define PD67_DMA_MODE 0xc0
+#define PD67_DMA_OFF 0x00
+#define PD67_DMA_DREQ_INPACK 0x40
+#define PD67_DMA_DREQ_WP 0x80
+#define PD67_DMA_DREQ_BVD2 0xc0
+#define PD67_DMA_PULLUP 0x20 /* Disable socket pullups? */
+
+/* Fields in PD67_EXT_CTL_1 */
+#define PD67_EC1_VCC_PWR_LOCK 0x01
+#define PD67_EC1_AUTO_PWR_CLEAR 0x02
+#define PD67_EC1_LED_ENA 0x04
+#define PD67_EC1_INV_CARD_IRQ 0x08
+#define PD67_EC1_INV_MGMT_IRQ 0x10
+#define PD67_EC1_PULLUP_CTL 0x20
+
+/* Fields in PD67_MISC_CTL_3 */
+#define PD67_MC3_IRQ_MASK 0x03
+#define PD67_MC3_IRQ_PCPCI 0x00
+#define PD67_MC3_IRQ_EXTERN 0x01
+#define PD67_MC3_IRQ_PCIWAY 0x02
+#define PD67_MC3_IRQ_PCI 0x03
+#define PD67_MC3_PWR_MASK 0x0c
+#define PD67_MC3_PWR_SERIAL 0x00
+#define PD67_MC3_PWR_TI2202 0x08
+#define PD67_MC3_PWR_SMB 0x0c
+
+/* Register definitions for Cirrus PD6832 PCI-to-CardBus bridge */
+
+/* PD6832 extension registers -- indexed in PD67_EXT_INDEX */
+#define PD68_EXT_CTL_2 0x0b
+#define PD68_PCI_SPACE 0x22
+#define PD68_PCCARD_SPACE 0x23
+#define PD68_WINDOW_TYPE 0x24
+#define PD68_EXT_CSC 0x2e
+#define PD68_MISC_CTL_4 0x2f
+#define PD68_MISC_CTL_5 0x30
+#define PD68_MISC_CTL_6 0x31
+
+/* Extra flags in PD67_MISC_CTL_3 */
+#define PD68_MC3_HW_SUSP 0x10
+#define PD68_MC3_MM_EXPAND 0x40
+#define PD68_MC3_MM_ARM 0x80
+
+/* Bridge Control Register */
+#define PD6832_BCR_MGMT_IRQ_ENA 0x0800
+
+/* Socket Number Register */
+#define PD6832_SOCKET_NUMBER 0x004c /* 8 bit */
+
+
+typedef struct cirrus_state_t {
+ u_char misc1, misc2;
+ u_char timer[6];
+} cirrus_state_t;
+
+/* Cirrus options */
+static int has_dma = -1;
+static int has_led = -1;
+static int has_ring = -1;
+static int dynamic_mode = 0;
+static int freq_bypass = -1;
+static int setup_time = -1;
+static int cmd_time = -1;
+static int recov_time = -1;
+
+
+#endif /* _LINUX_CIRRUS_H */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index cc9b479780..c6f5b18139 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -805,7 +805,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
load_sernum_ethaddr ();
#endif
-#if defined(CONFIG_ETH1ADDR)
+#ifdef CONFIG_HAS_ETH1
/* handle the 2nd ethernet address */
s = getenv ("eth1addr");
@@ -816,7 +816,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
s = (*e) ? e + 1 : e;
}
#endif
-#if defined(CONFIG_ETH2ADDR)
+#ifdef CONFIG_HAS_ETH2
/* handle the 3rd ethernet address */
s = getenv ("eth2addr");
@@ -832,7 +832,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
}
#endif
-#if defined(CONFIG_ETH3ADDR)
+#ifdef CONFIG_HAS_ETH3
/* handle 4th ethernet address */
s = getenv("eth3addr");
#if defined(CONFIG_XPEDITE1K)
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index 409adff665..09b8b5d7a7 100644
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -106,6 +106,9 @@ static uchar default_environment[] = {
#ifdef CONFIG_ETH2ADDR
"eth2addr=" MK_STR (CONFIG_ETH2ADDR) "\0"
#endif
+#ifdef CONFIG_ETH3ADDR
+ "eth3addr=" MK_STR (CONFIG_ETH3ADDR) "\0"
+#endif
#ifdef CONFIG_ETHPRIME
"ethprime=" CONFIG_ETHPRIME "\0"
#endif