/* * Device Tree Source for the Lager board * * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded, Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. */ /* * SSI-AK4643 * * SW1: 1: AK4643 * 2: CN22 * 3: ADV7511 * * This command is required when Playback/Capture * * amixer set "LINEOUT Mixer DACL" on * amixer set "DVC Out" 100% * amixer set "DVC In" 100% * * You can use Mute * * amixer set "DVC Out Mute" on * amixer set "DVC In Mute" on * * You can use Volume Ramp * * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" * amixer set "DVC Out Ramp" on * aplay xxx.wav & * amixer set "DVC Out" 80% // Volume Down * amixer set "DVC Out" 100% // Volume Up */ /dts-v1/; #include "r8a7790.dtsi" #include #include / { model = "Lager"; compatible = "renesas,lager", "renesas,r8a7790"; aliases { serial0 = &scifa0; serial1 = &scifa1; }; chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = &scifa0; }; memory@40000000 { device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; memory@140000000 { device_type = "memory"; reg = <1 0x40000000 0 0xc0000000>; }; lbsc { #address-cells = <1>; #size-cells = <1>; }; keyboard { compatible = "gpio-keys"; button@1 { linux,code = ; label = "SW2-1"; gpio-key,wakeup; debounce-interval = <20>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; button@2 { linux,code = ; label = "SW2-2"; gpio-key,wakeup; debounce-interval = <20>; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; button@3 { linux,code = ; label = "SW2-3"; gpio-key,wakeup; debounce-interval = <20>; gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; }; button@4 { linux,code = ; label = "SW2-4"; gpio-key,wakeup; debounce-interval = <20>; gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; led6 { gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; }; led7 { gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; }; led8 { gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; }; }; fixedregulator3v3: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; vcc_sdhi0: regulator@1 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>; enable-active-high; }; vccq_sdhi0: regulator@2 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1 1800000 0>; }; vcc_sdhi2: regulator@3 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>; enable-active-high; }; vccq_sdhi2: regulator@4 { compatible = "regulator-gpio"; regulator-name = "SDHI2 VccQ"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1 1800000 0>; }; sound { compatible = "simple-audio-card"; simple-audio-card,format = "left_j"; simple-audio-card,bitclock-master = <&sndcodec>; simple-audio-card,frame-master = <&sndcodec>; sndcpu: simple-audio-card,cpu { sound-dai = <&rcar_sound>; }; sndcodec: simple-audio-card,codec { sound-dai = <&ak4643>; system-clock-frequency = <11289600>; }; }; vga-encoder { compatible = "adi,adv7123"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; adv7123_in: endpoint { remote-endpoint = <&du_out_rgb>; }; }; port@1 { reg = <1>; adv7123_out: endpoint { remote-endpoint = <&vga_in>; }; }; }; }; vga { compatible = "vga-connector"; port { vga_in: endpoint { remote-endpoint = <&adv7123_out>; }; }; }; }; &du { pinctrl-0 = <&du_pins>; pinctrl-names = "default"; status = "okay"; ports { port@0 { endpoint { remote-endpoint = <&adv7123_in>; }; }; port@2 { lvds_connector: endpoint { }; }; }; }; &extal_clk { clock-frequency = <20000000>; }; &pfc { du_pins: du { renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; renesas,function = "du"; }; scifa0_pins: serial0 { renesas,groups = "scifa0_data"; renesas,function = "scifa0"; }; ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; }; phy1_pins: phy1 { renesas,groups = "intc_irq0"; renesas,function = "intc"; }; scifa1_pins: serial1 { renesas,groups = "scifa1_data"; renesas,function = "scifa1"; }; sdhi0_pins: sd0 { renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; renesas,function = "sdhi0"; }; sdhi2_pins: sd2 { renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; mmc1_pins: mmc1 { renesas,groups = "mmc1_data8", "mmc1_ctrl"; renesas,function = "mmc1"; }; qspi_pins: spi0 { renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; msiof1_pins: spi2 { renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", "msiof1_tx"; renesas,function = "msiof1"; }; iic1_pins: iic1 { renesas,groups = "iic1"; renesas,function = "iic1"; }; iic2_pins: iic2 { renesas,groups = "iic2"; renesas,function = "iic2"; }; iic3_pins: iic3 { renesas,groups = "iic3"; renesas,function = "iic3"; }; hsusb_pins: hsusb { renesas,groups = "usb0_ovc_vbus"; renesas,function = "usb0"; }; usb0_pins: usb0 { renesas,groups = "usb0"; renesas,function = "usb0"; }; usb1_pins: usb1 { renesas,groups = "usb1"; renesas,function = "usb1"; }; usb2_pins: usb2 { renesas,groups = "usb2"; renesas,function = "usb2"; }; vin1_pins: vin { renesas,groups = "vin1_data8", "vin1_clk"; renesas,function = "vin1"; }; sound_pins: sound { renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; renesas,function = "ssi"; }; sound_clk_pins: sound_clk { renesas,groups = "audio_clk_a"; renesas,function = "audio_clk"; }; }; ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; phy-handle = <&phy1>; renesas,ether-link-active-low; status = "okay"; phy1: ethernet-phy@1 { reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; }; }; &cmt0 { status = "okay"; }; &mmcif1 { pinctrl-0 = <&mmc1_pins>; pinctrl-names = "default"; vmmc-supply = <&fixedregulator3v3>; bus-width = <8>; non-removable; status = "okay"; }; &sata1 { status = "okay"; }; &qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; status = "okay"; flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,s25fl512s"; reg = <0>; spi-max-frequency = <30000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-cpha; spi-cpol; m25p,fast-read; partition@0 { label = "loader"; reg = <0x00000000 0x00040000>; read-only; }; partition@40000 { label = "user"; reg = <0x00040000 0x00400000>; read-only; }; partition@440000 { label = "flash"; reg = <0x00440000 0x03bc0000>; }; }; }; &scifa0 { pinctrl-0 = <&scifa0_pins>; pinctrl-names = "default"; status = "okay"; }; &scifa1 { pinctrl-0 = <&scifa1_pins>; pinctrl-names = "default"; status = "okay"; }; &msiof1 { pinctrl-0 = <&msiof1_pins>; pinctrl-names = "default"; status = "okay"; pmic: pmic@0 { compatible = "renesas,r2a11302ft"; reg = <0>; spi-max-frequency = <6000000>; spi-cpol; spi-cpha; }; }; &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; status = "okay"; }; &sdhi2 { pinctrl-0 = <&sdhi2_pins>; pinctrl-names = "default"; vmmc-supply = <&vcc_sdhi2>; vqmmc-supply = <&vccq_sdhi2>; cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; status = "okay"; }; &cpu0 { cpu0-supply = <&vdd_dvfs>; }; &iic0 { status = "okay"; }; &iic1 { status = "okay"; pinctrl-0 = <&iic1_pins>; pinctrl-names = "default"; }; &iic2 { status = "okay"; pinctrl-0 = <&iic2_pins>; pinctrl-names = "default"; clock-frequency = <100000>; ak4643: sound-codec@12 { compatible = "asahi-kasei,ak4643"; #sound-dai-cells = <0>; reg = <0x12>; }; composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; remote = <&vin1>; port { adv7180: endpoint { bus-width = <8>; remote-endpoint = <&vin1ep0>; }; }; }; }; &iic3 { pinctrl-names = "default"; pinctrl-0 = <&iic3_pins>; status = "okay"; vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-boot-on; regulator-always-on; }; }; &pci0 { status = "okay"; pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; }; &pci1 { status = "okay"; pinctrl-0 = <&usb1_pins>; pinctrl-names = "default"; }; &xhci { status = "okay"; pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; }; &pci2 { status = "okay"; pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; }; &hsusb { status = "okay"; pinctrl-0 = <&hsusb_pins>; pinctrl-names = "default"; renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>; }; &usbphy { status = "okay"; }; /* composite video input */ &vin1 { pinctrl-0 = <&vin1_pins>; pinctrl-names = "default"; status = "okay"; port { #address-cells = <1>; #size-cells = <0>; vin1ep0: endpoint { remote-endpoint = <&adv7180>; bus-width = <8>; }; }; }; &rcar_sound { pinctrl-0 = <&sound_pins &sound_clk_pins>; pinctrl-names = "default"; /* Single DAI */ #sound-dai-cells = <0>; status = "okay"; rcar_sound,dai { dai0 { playback = <&ssi0 &src2 &dvc0>; capture = <&ssi1 &src3 &dvc1>; }; }; }; &ssi1 { shared-pin; };