/* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /* * Peripherals common to all Gumstix Overo boards (Tobi, Summit, Palo43,...) */ / { lis33_3v3: lis33-3v3-reg { compatible = "regulator-fixed"; regulator-name = "lis33-3v3-reg"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; lis33_1v8: lis33-1v8-reg { compatible = "regulator-fixed"; regulator-name = "lis33-1v8-reg"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; }; &omap3_pmx_core { i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; }; &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; clock-frequency = <100000>; /* optional 1K EEPROM with revision information */ eeprom@51 { compatible = "atmel,24c01"; reg = <0x51>; pagesize = <8>; }; lis33de: lis33de@1d { compatible = "st,lis33de", "st,lis3lv02d"; reg = <0x1d>; Vdd-supply = <&lis33_1v8>; Vdd_IO-supply = <&lis33_3v3>; st,click-single-x; st,click-single-y; st,click-single-z; st,click-thresh-x = <10>; st,click-thresh-y = <10>; st,click-thresh-z = <10>; st,irq1-click; st,irq2-click; st,wakeup-x-lo; st,wakeup-x-hi; st,wakeup-y-lo; st,wakeup-y-hi; st,wakeup-z-lo; st,wakeup-z-hi; st,min-limit-x = <120>; st,min-limit-y = <120>; st,min-limit-z = <140>; st,max-limit-x = <550>; st,max-limit-y = <550>; st,max-limit-z = <750>; }; }; &mmc3 { status = "disabled"; }; &uart3 { interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; };