From dd186aa5a06ca50c8fbec06cb2d2ee8aa7b17443 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Fri, 6 Dec 2013 02:53:38 +0100 Subject: ARM: omap3-igep0020.dts: add display information Add DT data for OMAP3 IGEPv2 board. The board has the following displays: dvi: uses TFP410 encoder to convert DPI to DVI Signed-off-by: Javier Martinez Canillas Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep0020.dts | 58 ++++++++++++++++++++++++++++++++++-- 1 file changed, 55 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot/dts/omap3-igep0020.dts') diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 25a2b5f652fd..8aa4ded8ce03 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -61,22 +61,63 @@ reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */ vcc-supply = <&hsusb1_power>; }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@0 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c3>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; }; &omap3_pmx_core { pinctrl-names = "default"; pinctrl-0 = < &tfp410_pins - &dss_pins + &dss_dpi_pins >; - tfp410_pins: tfp410_dvi_pins { + tfp410_pins: pinmux_tfp410_pins { pinctrl-single,pins = < 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ >; }; - dss_pins: pinmux_dss_dvi_pins { + dss_dpi_pins: pinmux_dss_dpi_pins { pinctrl-single,pins = < 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -226,3 +267,14 @@ /* Needed for DSS */ regulator-name = "vdds_dsi"; }; + +&dss { + status = "ok"; + + port { + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; -- cgit v1.2.3