From 7e782c41da0148af457e474b8744e002af869227 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 6 Nov 2012 19:18:33 +0530 Subject: ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE Add pinmux configurations for gpio based user-keys to am335x-bone. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/am335x-bone.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch/arm/boot/dts/am335x-bone.dts') diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 91eee97371ea..1aac58bfb4a0 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -24,6 +24,20 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; -- cgit v1.2.3