From 04dcd84bc79d9f756bf5b9fc16c7df3344823ca8 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Thu, 9 Oct 2008 15:33:57 +0200 Subject: eeepc-laptop: Fix hwmon interface Creates a name file in the sysfs directory, that is needed for the libsensors library to work. Also rename fan1_pwm to pwm1 and scale its value as needed. This fixes bug #11520: http://bugzilla.kernel.org/show_bug.cgi?id=11520 Signed-off-by: Corentin Chary Signed-off-by: Jean Delvare --- drivers/misc/eeepc-laptop.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c index facdb9893c84..1ee8501e90f1 100644 --- a/drivers/misc/eeepc-laptop.c +++ b/drivers/misc/eeepc-laptop.c @@ -450,12 +450,14 @@ static int eeepc_get_fan_pwm(void) int value = 0; read_acpi_int(NULL, EEEPC_EC_FAN_PWM, &value); + value = value * 255 / 100; return (value); } static void eeepc_set_fan_pwm(int value) { - value = SENSORS_LIMIT(value, 0, 100); + value = SENSORS_LIMIT(value, 0, 255); + value = value * 100 / 255; ec_write(EEEPC_EC_SC02, value); } @@ -520,15 +522,23 @@ static ssize_t show_sys_hwmon(int (*get)(void), char *buf) static SENSOR_DEVICE_ATTR(_name, _mode, show_##_name, store_##_name, 0); EEEPC_CREATE_SENSOR_ATTR(fan1_input, S_IRUGO, eeepc_get_fan_rpm, NULL); -EEEPC_CREATE_SENSOR_ATTR(fan1_pwm, S_IRUGO | S_IWUSR, +EEEPC_CREATE_SENSOR_ATTR(pwm1, S_IRUGO | S_IWUSR, eeepc_get_fan_pwm, eeepc_set_fan_pwm); EEEPC_CREATE_SENSOR_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, eeepc_get_fan_ctrl, eeepc_set_fan_ctrl); +static ssize_t +show_name(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "eeepc\n"); +} +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); + static struct attribute *hwmon_attributes[] = { - &sensor_dev_attr_fan1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_name.dev_attr.attr, NULL }; -- cgit v1.2.3 From 98dd22c3e086d76058083432d4d8fb85f04bab90 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 9 Oct 2008 15:33:58 +0200 Subject: hwmon: (it87) Prevent power-off on Shuttle SN68PT On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan, but to something else. One user has reported instant system power-off when changing the PWM2 duty cycle, so we disable it. I use the board name string as the trigger in case the same board is ever used in other systems. This closes lm-sensors ticket #2349: pwmconfig causes a hard poweroff http://www.lm-sensors.org/ticket/2349 Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 70 ++++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 51 insertions(+), 19 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index f1133081cc42..d793cc011990 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -46,6 +46,8 @@ #include #include #include +#include +#include #include #define DRVNAME "it87" @@ -236,6 +238,8 @@ struct it87_sio_data { /* Values read from Super-I/O config space */ u8 revision; u8 vid_value; + /* Values set based on DMI strings */ + u8 skip_pwm; }; /* For each registered chip, we need to keep some data in memory. @@ -964,6 +968,7 @@ static int __init it87_find(unsigned short *address, { int err = -ENODEV; u16 chip_type; + const char *board_vendor, *board_name; superio_enter(); chip_type = force_id ? force_id : superio_inw(DEVID); @@ -1022,6 +1027,24 @@ static int __init it87_find(unsigned short *address, pr_info("it87: in7 is VCCH (+5V Stand-By)\n"); } + /* Disable specific features based on DMI strings */ + board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + board_name = dmi_get_system_info(DMI_BOARD_NAME); + if (board_vendor && board_name) { + if (strcmp(board_vendor, "nVIDIA") == 0 + && strcmp(board_name, "FN68PT") == 0) { + /* On the Shuttle SN68PT, FAN_CTL2 is apparently not + connected to a fan, but to something else. One user + has reported instant system power-off when changing + the PWM2 duty cycle, so we disable it. + I use the board name string as the trigger in case + the same board is ever used in other systems. */ + pr_info("it87: Disabling pwm2 due to " + "hardware constraints\n"); + sio_data->skip_pwm = (1 << 1); + } + } + exit: superio_exit(); return err; @@ -1168,25 +1191,33 @@ static int __devinit it87_probe(struct platform_device *pdev) } if (enable_pwm_interface) { - if ((err = device_create_file(dev, - &sensor_dev_attr_pwm1_enable.dev_attr)) - || (err = device_create_file(dev, - &sensor_dev_attr_pwm2_enable.dev_attr)) - || (err = device_create_file(dev, - &sensor_dev_attr_pwm3_enable.dev_attr)) - || (err = device_create_file(dev, - &sensor_dev_attr_pwm1.dev_attr)) - || (err = device_create_file(dev, - &sensor_dev_attr_pwm2.dev_attr)) - || (err = device_create_file(dev, - &sensor_dev_attr_pwm3.dev_attr)) - || (err = device_create_file(dev, - &dev_attr_pwm1_freq)) - || (err = device_create_file(dev, - &dev_attr_pwm2_freq)) - || (err = device_create_file(dev, - &dev_attr_pwm3_freq))) - goto ERROR4; + if (!(sio_data->skip_pwm & (1 << 0))) { + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm1_enable.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm1.dev_attr)) + || (err = device_create_file(dev, + &dev_attr_pwm1_freq))) + goto ERROR4; + } + if (!(sio_data->skip_pwm & (1 << 1))) { + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm2_enable.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm2.dev_attr)) + || (err = device_create_file(dev, + &dev_attr_pwm2_freq))) + goto ERROR4; + } + if (!(sio_data->skip_pwm & (1 << 2))) { + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm3_enable.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm3.dev_attr)) + || (err = device_create_file(dev, + &dev_attr_pwm3_freq))) + goto ERROR4; + } } if (data->type == it8712 || data->type == it8716 @@ -1546,6 +1577,7 @@ static int __init sm_it87_init(void) unsigned short isa_address=0; struct it87_sio_data sio_data; + memset(&sio_data, 0, sizeof(struct it87_sio_data)); err = it87_find(&isa_address, &sio_data); if (err) return err; -- cgit v1.2.3 From ddedc658fc56bb5b9b200d7f4df6e93e1d0d8048 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 9 Oct 2008 15:33:58 +0200 Subject: hwmon: Define sysfs interface for energy consumption register Describe the sysfs files that were introduced in the ibmaem driver. Signed-off-by: Darrick J. Wong Signed-off-by: Jean Delvare --- Documentation/hwmon/sysfs-interface | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 2d845730d4e0..6dbfd5efd991 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -329,6 +329,10 @@ power[1-*]_average Average power use Unit: microWatt RO +power[1-*]_average_interval Power use averaging interval + Unit: milliseconds + RW + power[1-*]_average_highest Historical average maximum power use Unit: microWatt RO @@ -353,6 +357,14 @@ power[1-*]_reset_history Reset input_highest, input_lowest, average_highest and average_lowest. WO +********** +* Energy * +********** + +energy[1-*]_input Cumulative energy use + Unit: microJoule + RO + ********** * Alarms * ********** -- cgit v1.2.3 From c73c556c1ae3619d8a7c55254b0ddcf10034a914 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 9 Oct 2008 15:33:58 +0200 Subject: hwmon: (adt7473) Fix some bogosity in documentation file Signed-off-by: Darrick J. Wong Signed-off-by: Jean Delvare --- Documentation/hwmon/adt7473 | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473 index 2126de34c711..1cbf671822e2 100644 --- a/Documentation/hwmon/adt7473 +++ b/Documentation/hwmon/adt7473 @@ -14,14 +14,14 @@ Description This driver implements support for the Analog Devices ADT7473 chip family. -The LM85 uses the 2-wire interface compatible with the SMBUS 2.0 +The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0 specification. Using an analog to digital converter it measures three (3) -temperatures and two (2) voltages. It has three (3) 16-bit counters for +temperatures and two (2) voltages. It has four (4) 16-bit counters for measuring fan speed. There are three (3) PWM outputs that can be used to control fan speed. A sophisticated control system for the PWM outputs is designed into the -LM85 that allows fan speed to be adjusted automatically based on any of the +ADT7473 that allows fan speed to be adjusted automatically based on any of the three temperature sensors. Each PWM output is individually adjustable and programmable. Once configured, the ADT7473 will adjust the PWM outputs in response to the measured temperatures without further host intervention. @@ -46,14 +46,6 @@ from the raw value to get the temperature value. The Analog Devices datasheet is very detailed and describes a procedure for determining an optimal configuration for the automatic PWM control. -Hardware Configurations ------------------------ - -The ADT7473 chips have an optional SMBALERT output that can be used to -signal the chipset in case a limit is exceeded or the temperature sensors -fail. Individual sensor interrupts can be masked so they won't trigger -SMBALERT. The SMBALERT output if configured replaces the PWM2 function. - Configuration Notes ------------------- @@ -61,8 +53,8 @@ Besides standard interfaces driver adds the following: * PWM Control -* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and -* pwm#_auto_point2_pwm and pwm#_auto_point2_temp - +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - point1: Set the pwm speed at a lower temperature bound. point2: Set the pwm speed at a higher temperature bound. -- cgit v1.2.3 From 8748a71e8c2d1310b66c2feed1632de8620cd2f1 Mon Sep 17 00:00:00 2001 From: Alistair John Strachan Date: Thu, 9 Oct 2008 15:33:59 +0200 Subject: hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X The table for the Abit AT8 32X was incorrectly missing an entry for the sixth ("AUX3") fan. Add this entry, exporting the fan reading to userspace. Closes lm-sensors.org ticket #2339. Signed-off-by: Alistair John Strachan Tested-by: Daniel Exner Acked-by: Hans de Goede Signed-off-by: Jean Delvare --- drivers/hwmon/abituguru3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index d568c65c1370..4545194a0044 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -303,6 +303,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "SYS Fan", 34, 2, 60, 1, 0 }, { "AUX1 Fan", 35, 2, 60, 1, 0 }, { "AUX2 Fan", 36, 2, 60, 1, 0 }, + { "AUX3 Fan", 37, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, { 0x0012, NULL /* Abit AN8 32X, need DMI string */, { -- cgit v1.2.3 From 5e5cddbc3f2936c9fefbae64633c522e242c350d Mon Sep 17 00:00:00 2001 From: Alistair John Strachan Date: Thu, 9 Oct 2008 15:33:59 +0200 Subject: hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X Enable driver checking of the DMI product name (when enabled) on an Abit AT8 32X, instead of falling back to a manual probe. This eliminates false negatives and eventually will help avoid unnecessary bus probes on unsupported mainboards. Signed-off-by: Alistair John Strachan Tested-by: Daniel Exner Acked-by: Hans de Goede Signed-off-by: Jean Delvare --- drivers/hwmon/abituguru3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index 4545194a0044..d9e7a49d6cbf 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -279,7 +279,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "OTES1 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0011, NULL /* Abit AT8 32X, need DMI string */, { + { 0x0011, "AT8 32X(ATI RD580-ULI M1575)", { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 20, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, -- cgit v1.2.3