summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2015-04-11Merge tag 'asoc-fix-v4.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound Pull last-minute ASoC fix from Mark Brown: "This patch backs out a change that came in during the merge window which selects a configuration for GPIO4 on pcm512x CODECs that may not be suitable for all systems using the device. Changes for v4.1 will make this properly configurable but for now it's safest to revert to the v3.19 behaviour and leave the pin configuration alone. Sorry for sending this direct at the last minute but due to the GPIO misuse it'd be really good to get it in the release and I'd not realised it hadn't been sent yet - between some travel, a job change and other non-urgent fixes coming in I'd lost track of the urgency. It's been in -next for several weeks now, is isolated to the driver and fairly clear to inspection" * tag 'asoc-fix-v4.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound: ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4
2015-04-11ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4Howard Mitchell
Currently GPIO4 is hardcoded to output the pll-lock signal. Unfortunately this is after the pll-out GPIO is configured which is selectable in the device tree. Therefore it is not possible to use GPIO4 for pll-out. Therefore this patch removes the configuration of GPIO4. Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-09ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob supportDmitry M. Fedin
Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3237" Signed-off-by: Dmitry M. Fedin <dmitry.fedin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-08ALSA: hda - Fix headphone pin config for Lifebook T731Takashi Iwai
Some BIOS version of Fujitsu Lifebook T731 seems to set up the headphone pin (0x21) without the assoc number 0x0f while it's set only to the output on the docking port (0x1a). With the recent commit [03ad6a8c93b6: ALSA: hda - Fix "PCM" name being used on one DAC when there are two DACs], this resulted in the weird mixer element mapping where the headphone on the laptop is assigned as a shared volume with the speaker and the docking port is assigned as an individual headphone. This patch improves the situation by correcting the headphone pin config to the more appropriate value. Reported-and-tested-by: Taylor Smock <smocktaylor@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-08ALSA: bebob: fix to processing in big-endian machine for sending cueTakashi Sakamoto
Some M-Audio devices require to receive bootup command just after powering on, while codes in BeBoB driver doesn't work properly in big-endian machine because the command should be aligned by little-endian. This commit fixes this bug. This fix should go to stable kernel. Cc: Takayuki Shiroma <t.shiroma.oki@gmail.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-08ALSA: hda/realtek - Make more stable to get pin sense for ALC283Kailang Yang
Pin sense will active when power pin is wake up. Power pin will not wake up immediately during resume state. Add some delay to wait for power pin activated. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-04ALSA: usb-audio: don't try to get Benchmark DAC1 sample rateEric Wong
Adding this quirk allows us to avoid the noisy "cannot get freq at ep 0x1" message in dmesg output every time playback starts. This ought to affect other Benchmark DAC1 variations using the same "Microchip Technology, Inc." chip as well, but I have only tested with the "Pre" variant. Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Joe Turner <joe@oampo.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-04ALSA: hda/realtek - Support Dell headset mode for ALC256Kailang Yang
Dell new platform of ALC256 audio codec. Support headset mode for Dell ALC256 platform. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-26ALSA: hda - Add one more node in the EAPD supporting candidate listHui Wang
We have a HP machine which use the codec node 0x17 connecting the internal speaker, and from the node capability, we saw the EAPD, if we don't set the EAPD on for this node, the internal speaker can't output any sound. Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1436745 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-26ALSA: hda_intel: apply the Seperate stream_tag for Sunrise PointLibin Yang
The total stream number of Sunrise Point's input and output stream exceeds 15, which will cause some streams do not work because of the overflow on SDxCTL.STRM field if using the legacy stream tag allocation method. This patch uses the new stream tag allocation method by add the flag AZX_DCAPS_SEPARATE_STREAM_TAG for Skylake platform. Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23ALSA: hda - Add dock support for Thinkpad T450s (17aa:5036)Sebastian Wicki
This model uses the same dock port as the previous generation. Signed-off-by: Sebastian Wicki <gandro@gmx.net> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-17Merge tag 'asoc-fix-v4.0-rc4' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.0 As well as the usual collection of driver specific fixes there's a few more generic things: - Lots of fixes from Takashi for drivers using the wrong field in the control union to communicate with userspace, leading to potential errors on 64 bit systems. - A fix from Lars for locking of the lists of devices we maintain, mostly only likely to trigger during device probe and removal.
2015-03-16ALSA: hda - Treat stereo-to-mono mix properlyTakashi Iwai
The commit [ef403edb7558: ALSA: hda - Don't access stereo amps for mono channel widgets] fixed the handling of mono widgets in general, but it still misses an exceptional case: namely, a mono mixer widget taking a single stereo input. In this case, it has stereo volumes although it's a mono widget, and thus we have to take care of both left and right input channels, as stated in HD-audio spec ("7.1.3 Widget Interconnection Rules"). This patch covers this missing piece by adding proper checks of stereo amps in both the generic parser and the proc output codes. Reported-by: Raymond Yau <superquad.vortex2@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-16Merge remote-tracking branches 'asoc/fix/sgtl5000' and 'asoc/fix/sn95031' ↵Mark Brown
into asoc-linus
2015-03-16Merge remote-tracking branches 'asoc/fix/ak4671', 'asoc/fix/control', ↵Mark Brown
'asoc/fix/da732x', 'asoc/fix/fsl-ssi', 'asoc/fix/lock' and 'asoc/fix/rt286' into asoc-linus
2015-03-16Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown
2015-03-15Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clock framework fixes from Michael Turquette: "The clk fixes for 4.0-rc4 comprise three themes. First are the usual driver fixes for new regressions since v3.19. Second are fixes to the common clock divider type caused by recent changes to how we round clock rates. This affects many clock drivers that use this common code. Finally there are fixes for drivers that improperly compared struct clk pointers (drivers must not deref these pointers). While some of these drivers have done this for a long time, this did not cause a problem until we started generating unique struct clk pointers for every consumer. A new function, clk_is_match was introduced to get these drivers working again and they are fixed up to no longer deref the pointers themselves" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: ASoC: kirkwood: fix struct clk pointer comparing ASoC: fsl_spdif: fix struct clk pointer comparing ARM: imx: fix struct clk pointer comparing clk: introduce clk_is_match clk: don't export static symbol clk: divider: fix calculation of initial best divider when rounding to closest clk: divider: fix selection of divider when rounding to closest clk: divider: fix calculation of maximal parent rate for a given divider clk: divider: return real rate instead of divider value clk: qcom: fix platform_no_drv_owner.cocci warnings clk: qcom: fix platform_no_drv_owner.cocci warnings clk: qcom: Add PLL4 vote clock clk: qcom: lcc-msm8960: Fix PLL rate detection clk: qcom: Fix slimbus n and m val offsets clk: ti: Fix FAPLL parent enable bit handling
2015-03-13ALSA: hda - Don't access stereo amps for mono channel widgetsTakashi Iwai
The current HDA generic parser initializes / modifies the amp values always in stereo, but this seems causing the problem on ALC3229 codec that has a few mono channel widgets: namely, these mono widgets react to actions for both channels equally. In the driver code, we do care the mono channel and create a control only for the left channel (as defined in HD-audio spec) for such a node. When the control is updated, only the left channel value is changed. However, in the resume, the right channel value is also restored from the initial value we took as stereo, and this overwrites the left channel value. This ends up being the silent output as the right channel has been never touched and remains muted. This patch covers the places where unconditional stereo amp accesses are done and converts to the conditional accesses. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94581 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12ALSA: hda - Add workaround for MacBook Air 5,2 built-in micTakashi Iwai
MacBook Air 5,2 has the same problem as MacBook Pro 8,1 where the built-in mic records only the right channel. Apply the same workaround as MBP8,1 to spread the mono channel via a Cirrus codec vendor-specific COEF setup. Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com> Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12ALSA: hda - Set single_adc_amp flag for CS420x codecsTakashi Iwai
CS420x codecs seem to deal only the single amps of ADC nodes even though the nodes receive multiple inputs. This leads to the inconsistent amp value after S3/S4 resume, for example. The fix is just to set codec->single_adc_amp flag. Then the driver handles these ADC amps as if single connections. Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com> Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12ALSA: snd-usb: add quirks for Roland UA-22Daniel Mack
The device complies to the UAC1 standard but hides that fact with proprietary descriptors. The autodetect quirk for Roland devices catches the audio interface but misses the MIDI part, so a specific quirk is needed. Signed-off-by: Daniel Mack <daniel@zonque.org> Reported-by: Rafa Lafuente <rafalafuente@gmail.com> Tested-by: Raphaël Doursenaud <raphael@doursenaud.fr> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12ALSA: control: Add sanity checks for user ctl id name stringTakashi Iwai
There was no check about the id string of user control elements, so we accepted even a control element with an empty string, which is obviously bogus. This patch adds more sanity checks of id strings. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-11ASoC: kirkwood: fix struct clk pointer comparingShawn Guo
Since commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances"), clk API users can no longer check if two struct clk pointers are pointing to the same hardware clock, i.e. struct clk_hw, by simply comparing two pointers. That's because with the per-user clk change, a brand new struct clk is created whenever clients try to look up the clock by calling clk_get() or sister functions like clk_get_sys() and of_clk_get(). This changes the original behavior where the struct clk is only created for once when clock driver registers the clock to CCF in the first place. The net change here is before commit 035a61c314eb the struct clk pointer is unique for given hardware clock, while after the commit the pointers returned by clk lookup calls become different for the same hardware clock. That said, the struct clk pointer comparing in the code doesn't work any more. Call helper function clk_is_match() instead to fix the problem. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-11ASoC: fsl_spdif: fix struct clk pointer comparingShawn Guo
Since commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances"), clk API users can no longer check if two struct clk pointers are pointing to the same hardware clock, i.e. struct clk_hw, by simply comparing two pointers. That's because with the per-user clk change, a brand new struct clk is created whenever clients try to look up the clock by calling clk_get() or sister functions like clk_get_sys() and of_clk_get(). This changes the original behavior where the struct clk is only created for once when clock driver registers the clock to CCF in the first place. The net change here is before commit 035a61c314eb the struct clk pointer is unique for given hardware clock, while after the commit the pointers returned by clk lookup calls become different for the same hardware clock. That said, the struct clk pointer comparing in the code doesn't work any more. Call helper function clk_is_match() instead to fix the problem. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-11ALSA: hda - Fix built-in mic on Compaq Presario CQ60Takashi Iwai
Compaq Presario CQ60 laptop with CX20561 gives a wrong pin for the built-in mic NID 0x17 instead of NID 0x1d, and it results in the non-working mic. This patch just remaps the pin correctly via fixup. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=920604 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10ASoC: wm9713: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: wm9712: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: wm8960: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: wm8955: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: wm8904: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: wm8903: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: wm8731: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: wm2000: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: tas5086: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: pcm1681: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: es8238: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: cs4271: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: ak4641: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ASoC: adav80x: Fix wrong value references for boolean kctlTakashi Iwai
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-03-10ALSA: firewire-lib: leave unit reference counting completelyTakashi Sakamoto
With previous commit, this module managed to leave the counting to each drivers, but the isochronous resources functionality still increment/decrement the count. This commit purge such codes to leave the responsibility to each drivers. Fix: c6f224dc20ad ('ALSA: firewire-lib: remove reference counting') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10Revert "ALSA: dice: fix wrong offsets for Dice interface"Takashi Sakamoto
This reverts commit 8cdebf71098c07168ef6335e2f1f35d85dbe3049. The reverted commit breaks out-stream functionality of Dice driver. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-09ALSA: hda - Fix regression of HD-audio controller fallback modesTakashi Iwai
The commit [63e51fd708f5: ALSA: hda - Don't take unresponsive D3 transition too serious] introduced a conditional fallback behavior to the HD-audio controller depending on the flag set. However, it introduced a silly bug, too, that the flag was evaluated in a reverse way. This resulted in a regression of HD-audio controller driver where it can't go to the fallback mode at communication errors. Unfortunately (or fortunately?) this didn't come up until recently because the affected code path is an error handling that happens only on an unstable hardware chip. Most of recent chips work stably, thus they didn't hit this problem. Now, we've got a regression report with a VIA chip, and this seems indeed requiring the fallback to the polling mode, and finally the bug was revealed. The fix is a oneliner to remove the wrong logical NOT in the check. (Lesson learned - be careful about double negation.) The bug should be backported to stable, but the patch won't be applicable to 3.13 or earlier because of the code splits. The stable fix patches for earlier kernels will be posted later manually. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94021 Fixes: 63e51fd708f5 ('ALSA: hda - Don't take unresponsive D3 transition too serious') Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-08ASoC: Fix component lists lockingLars-Peter Clausen
Any access to the component_list, codec_list and platform_list needs to be properly locked by the client_mutex. Otherwise undefined behavior can occur if the list is modified in one thread and concurrently accessed from another thread. This patch adds the missing locking to the debugfs file handlers that display the registered components, as well as the various components unregister functions. Furthermore the client_lock is now held for the whole snd_soc_instantiate_card() sequence to make sure that component removal does not race against the card registration. Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-06ASoC: Intel: remove conflicts when load/unload multiple firmware imagesLu, Han
Details: 1. Unload all modules on fw_list of dsp when suspend, and reload all modules on fw_list when resume. 2. A DSP expects only one scratch, but hsw_parse_fw_image() allocates scratch blocks for each firmware image it parses. Move the allocate function sst_block_alloc_scratch() out of hsw_parse_fw_image() to make sure a scratch be allocated only after all firmware images be parsed. Signed-off-by: Lu, Han <han.lu@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-06ASoC: rt286: Change the DMI mapping for DinoBard Liao
The board ID will be changed between revisions. So, it is better to map it by project name. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-06ASoC: sgtl5000: remove useless register write clearing CHRGPUMP_POWERUPEric Nelson
The SGTL5000_CHIP_ANA_POWER register is cached. Update the cached value instead of writing it directly. Patch inspired by Russell King's more colorful remarks in this patch: https://github.com/SolidRun/linux-imx6-3.14/commit/dd4bf6a Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-03-06Merge tag 'asoc-fix-v4.0-rc2' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.0 A few driver specific fixes here, none of them earth shattering in themselves, that have accumliated since the opening of the merge window.
2015-03-06ALSA: hda - One more Dell macine needs DELL1_MIC_NO_PRESENCE quirkHui Wang
Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1428947 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-06ALSA: opl3: small array underflowDan Carpenter
There is a missing lower bound check on "pitchbend" so it means we can read up to 6 elements before the start of the opl3_note_table[] array. Thanks to Clemens Ladisch for his help with this patch. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-05ASoC: fsl_ssi: Don't try to round-up for PM divisor calculationNicolin Chen
According to i.MX6 Series Reference Manual, the formula to calculate the sys clock is sysclk rate = bclk rate * (div2 + 1) * (7 * psr + 1) * (pm + 1) * 2 Commit aafa85e71a75 ("ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series") added the divisor calculation which relies on the clk_round_rate(). However, at that time, clk_round_rate() didn't provide closest clock rates for some cases because it might not use a correct rounding policy. So using the original formula (pm + 1) for PM divisor was not able to give us a desired clock rate. And then we used (pm + 2) to do the trick. However, the clk-divider driver has been refined a lot since commit b11d282dbea2 ("clk: divider: fix rate calculation for fractional rates") Now using (pm + 2) trick would result an incorrect clock rate. So this patch fixes the problem by removing the useless trick. Reported-by: Stephane Cerveau <scerveau@voxtok.com> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>