Age | Commit message (Collapse) | Author |
|
* added i2c driver to defconfig
* added i2c3 pins to A31 dtsi
* enabled all i2c blocks in dts
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
|
|
* operating points for different frequencies with voltages set to optimize
power consumption
* clock latency and ramp-rate: these values seem to provide enough time for
the voltage to adjust before frequency changes
Signed-off-by: Octav Zlatior <octav.zlatior@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
switching from gzip to lzma reduces the uImage size about 1MB
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
|
|
* LED on the module (heartbeat)
* LED on the baseboard (MMC0)
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
|
|
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
This patch adds support for the GPU clocks on sun6i a31.
This is a typical clock path, which can be realized with this patch:
* PLL8 -> GPU_HYD
-> GPU_MEM
* PLL9 -> GPU_CORE
* AHB1 -> AHB1_GPU
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
basic defconfig working with systemd.
do not try to upstream.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
add initial support for the Allwinner A31 based Qseven module pangolin from
Theobroma Systems.
derived from sun6i-a31-hummingbird.dts
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
On sun6i we already have PLL6 as AHB1 clock's parent. However this was
previously set in the dma controller node, which takes effect when the
dma controller is probed.
We want this to take effect as soon as possible, so hrtimer rate
calculation is correct, and to be sure the AHB1 clock rate remains as
stable as possible.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
The core temperature sensor now supports thermal zones. Add a thermal
zone mapping for the cpus with passive cooling (cpufreq throttling).
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
The cpu core is clocked from the "cpu" clock. Add a reference to it
in the first cpu node. Also add "cpu0" label to the node.
The operating points were taken from the a list compiled by Maxime Ripard,
which is based on A31 FEX files from the sunxi-boards repository. Not all
boards have the same settings. The settings in this patch are the ones
shared by A/B/C revisions, plus the default clock setting from u-boot.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
The p2wi controller has only one possible pinmux setting. Use it by
default in the dtsi, instead of having to set it in each board's dts.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
[wens@csie.org: reformat commit title; rename p2wi pins and use as default]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
git://git.rocketboards.org/linux-socfpga-next
Pull arch/nios2 fixes from Ley Foon Tan:
"There are 3 arch/nios2 fixes for 4.0 final:
- fix cache coherency issue when debugging with gdb
- move restart_block to struct task_struct (aligned with other
architectures)
- fix for missing registers defines for ptrace"
* tag 'nios2-fixes-v4.0-final' of git://git.rocketboards.org/linux-socfpga-next:
nios2: fix cache coherency issue when debug with gdb
nios2: add missing ptrace registers defines
nios2: signal: Move restart_block to struct task_struct
|
|
Remove the end address checking for flushda function. We need to flush
each address line for flushda instruction, from start to end address.
This is because flushda instruction only flush the cache if tag and line
fields are matched.
Change to use ldwio instruction (bypass cache) to load the instruction
that causing trap. Our interest is the actual instruction that executed
by the processor, this should be uncached.
Note, EA address might be an userspace cached address.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Here are some fixes for v4.0. I apologize for how late they are. We
were hoping for some better fixes, but couldn't get them polished in
time. These fix:
- a Xen domU oops with PCI passthrough devices
- a sparc T5 boot failure
- a STM SPEAr13xx crash (use after initdata freed)
- a cpcihp hotplug driver thinko
- an AER thinko that printed stack junk
Details:
Enumeration
- Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas)
Resource management
- Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas)
AER
- Avoid info leak in __print_tlp_header() (Rasmus Villemoes)
PCI device hotplug
- Add missing curly braces in cpci_configure_slot() (Dan Carpenter)
ST Microelectronics SPEAr13xx host bridge driver
- Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov)
* tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "sparc/PCI: Clip bridge windows to fit in upstream windows"
PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
PCI: cpcihp: Add missing curly braces in cpci_configure_slot()
PCI/AER: Avoid info leak in __print_tlp_header()
PCI: spear: Drop __initdata from spear13xx_pcie_driver
|
|
These are all register available in nios2.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
|
|
The rule for 'copy_from_user()' is that it zeroes the remaining kernel
buffer even when the copy fails halfway, just to make sure that we don't
leave uninitialized kernel memory around. Because even if we check for
errors, some kernel buffers stay around after thge copy (think page
cache).
However, the x86-64 logic for user copies uses a copy_user_generic()
function for all the cases, that set the "zerorest" flag for any fault
on the source buffer. Which meant that it didn't just try to clear the
kernel buffer after a failure in copy_from_user(), it also tried to
clear the destination user buffer for the "copy_in_user()" case.
Not only is that pointless, it also means that the clearing code has to
worry about the tail clearing taking page faults for the user buffer
case. Which is just stupid, since that case shouldn't happen in the
first place.
Get rid of the whole "zerorest" thing entirely, and instead just check
if the destination is in kernel space or not. And then just use
memset() to clear the tail of the kernel buffer if necessary.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit d63e2e1f3df904bf6bd150bdafb42ddbb3257ea8.
David Ahern reported that d63e2e1f3df9 breaks booting on an 8-socket T5
sparc system. He also verified that the system boots with d63e2e1f3df9
reverted. Yinghai has some fixes, but they need a little more polishing
than we can do before v4.0.
Link: http://lkml.kernel.org/r/5514391F.2030300@oracle.com # report
Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org # patches
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.19+
|
|
See https://lkml.org/lkml/2014/10/29/643 and commit f56141e3e2d9
("all arches, signal: move restart_block to struct task_struct")
Signed-off-by: Ley Foon Tan <lftan@altera.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a SYSRET single-stepping fix, a dmi-scan robustization
fix, a reboot quirk and a kgdb fixlet"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kgdb/x86: Fix reporting of 'si' in kgdb on x86_64
x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF set
x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk
MAINTAINERS: Change the x86 microcode loader maintainer
firmware: dmi_scan: Prevent dmi_num integer overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Two x86 Intel PMU constraint handling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix Haswell CYCLE_ACTIVITY.* counter constraints
perf/x86/intel: Filter branches for PEBS event
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen regression fixes from David Vrabel:
"Fix two regressions in the balloon driver's use of memory hotplug when
used in a PV guest"
* tag 'stable/for-linus-4.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: before adding hotplugged memory, set frames to invalid
x86/xen: prepare p2m list for memory hotplug
|
|
Some of the CYCLE_ACTIVITY.* events can only be scheduled on
counter 2. Due to a typo Haswell matched those with
INTEL_EVENT_CONSTRAINT, which lead to the events never
matching as the comparison does not expect anything
in the umask too. Fix the typo.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1425925222-32361-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
For supporting Intel LBR branches filtering, Intel LBR sharing logic
mechanism is introduced from commit b36817e88630 ("perf/x86: Add Intel
LBR sharing logic"). It modifies __intel_shared_reg_get_constraints() to
config lbr_sel, which is finally used to set LBR_SELECT.
However, the intel_shared_regs_constraints() function is called after
intel_pebs_constraints(). The PEBS event will return immediately after
intel_pebs_constraints(). So it's impossible to filter branches for PEBS
events.
This patch moves intel_shared_regs_constraints() ahead of
intel_pebs_constraints().
We can safely do that because the intel_shared_regs_constraints() function
only returns empty constraint if its rejecting the event, otherwise it
returns NULL such that we continue calling intel_pebs_constraints() and
x86_get_event_constraint().
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1427467105-9260-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch fixes an error in kgdb for x86_64 which would report
the value of dx when asked to give the value of si.
Signed-off-by: Steffen Liebergeld <steffen.liebergeld@kernkonzept.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When I wrote the opportunistic SYSRET code, I missed an important difference
between SYSRET and IRET.
Both instructions are capable of setting EFLAGS.TF, but they behave differently
when doing so:
- IRET will not issue a #DB trap after execution when it sets TF.
This is critical -- otherwise you'd never be able to make forward progress when
returning to userspace.
- SYSRET, on the other hand, will trap with #DB immediately after
returning to CPL3, and the next instruction will never execute.
This breaks anything that opportunistically SYSRETs to a user
context with TF set. For example, running this code with TF set
and a SIGTRAP handler loaded never gets past 'post_nop':
extern unsigned char post_nop[];
asm volatile ("pushfq\n\t"
"popq %%r11\n\t"
"nop\n\t"
"post_nop:"
: : "c" (post_nop) : "r11");
In my defense, I can't find this documented in the AMD or Intel manual.
Fix it by using IRET to restore TF.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2a23c6b8a9c4 ("x86_64, entry: Use sysret to return to userspace when possible")
Link: http://lkml.kernel.org/r/9472f1ca4c19a38ecda45bba9c91b7168135fcfa.1427923514.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The ASRock Q1900DC-ITX mainboard (Baytrail-D) hangs randomly in
both BIOS and UEFI mode while rebooting unless reboot=pci is
used. Add a quirk to reboot via the pci method.
The problem is very intermittent and hard to debug, it might succeed
rebooting just fine 40 times in a row - but fails half a dozen times
the next day. It seems to be slightly less common in BIOS CSM mode
than native UEFI (with the CSM disabled), but it does happen in either
mode. Since I've started testing this patch in late january, rebooting
has been 100% reliable.
Most of the time it already hangs during POST, but occasionally it
might even make it through the bootloader and the kernel might even
start booting, but then hangs before the mode switch. The same symptoms
occur with grub-efi, gummiboot and grub-pc, just as well as (at least)
kernel 3.16-3.19 and 4.0-rc6 (I haven't tried older kernels than 3.16).
Upgrading to the most current mainboard firmware of the ASRock
Q1900DC-ITX, version 1.20, does not improve the situation.
( Searching the web seems to suggest that other Bay Trail-D mainboards
might be affected as well. )
--
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: <stable@vger.kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20150330224427.0fb58e42@mir
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Space allocated for paca is based off nr_cpu_ids,
but pnv_alloc_idle_core_states() iterates paca with
cpu_nr_cores()*threads_per_core, which is using NR_CPUS.
This causes pnv_alloc_idle_core_states() to write over memory,
which is outside of paca array and may later lead to various panics.
Fixes: 7cba160ad789 (powernv/cpuidle: Redesign idle states management)
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"The latest and greatest fixes for ARM platform code. Worth pointing
out are:
- Lines-wise, largest is a PXA fix for dealing with interrupts on DT
that was quite broken. It's still newish code so while we could
have held this off, it seemed appropriate to include now
- Some GPIO fixes for OMAP platforms added a few lines. This was
also fixes for code recently added (this release).
- Small OMAP timer fix to behave better with partially upstreamed
platforms, which is quite welcome.
- Allwinner fixes about operating point control, reducing
overclocking in some cases for better stability.
plus a handful of other smaller fixes across the map"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: juno: Fix misleading name of UART reference clock
ARM: dts: sunxi: Remove overclocked/overvoltaged OPP
ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting
ARM: socfpga: dts: fix spi1 interrupt
ARM: dts: Fix gpio interrupts for dm816x
ARM: dts: dra7: remove ti,hwmod property from pcie phy
ARM: OMAP: dmtimer: disable pm runtime on remove
ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
ARM: OMAP2+: Fix socbus family info for AM33xx devices
ARM: dts: omap3: Add missing dmas for crypto
ARM: dts: rockchip: disable gmac by default in rk3288.dtsi
MAINTAINERS: add rockchip regexp to the ARM/Rockchip entry
ARM: pxa: fix pxa interrupts handling in DT
ARM: pxa: Fix typo in zeus.c
ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Allwinner fixes for 4.0
There's a few fixes to merge for 4.0, one to add a select in the machine
Kconfig option to fix a potential build failure, and two fixing cpufreq related
issues.
* tag 'sunxi-fixes-for-4.0' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: dts: sunxi: Remove overclocked/overvoltaged OPP
ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting
ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for the -rc cycle:
- Fix a device tree based booting vs legacy booting regression for
omap3 crypto hardware by adding the missing DMA channels.
- Fix /sys/bus/soc/devices/soc0/family for am33xx devices.
- Fix two timer issues that can cause hangs if the timer related
hwmod data is missing like it often initially is for new SoCs.
- Remove pcie hwmods entry from dts as that causes runtime PM to
fail for the PHYs.
- A paper bag type dts configuration fix for dm816x GPIO
interrupts that I just noticed. This is most of the changes
diffstat wise, but as it's a basic feature for connecting
devices and things work otherwise, it should be fixed.
* tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix gpio interrupts for dm816x
ARM: dts: dra7: remove ti,hwmod property from pcie phy
ARM: OMAP: dmtimer: disable pm runtime on remove
ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
ARM: OMAP2+: Fix socbus family info for AM33xx devices
ARM: dts: omap3: Add missing dmas for crypto
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.rocketboards.org/linux-socfpga-next into fixes
Late fix for v4.0 on the SoCFPGA platform:
- Fix interrupt number for SPI1 interface
* tag 'socfpga_fix_for_v4.0_2' of git://git.rocketboards.org/linux-socfpga-next:
ARM: socfpga: dts: fix spi1 interrupt
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The UART reference clock speed is 7273.8 kHz, not 72738 kHz.
Dots aren't usually used in node names even though ePAPR permits
them. However, this can easily be avoided by expressing the
frequency in Hz, not kHz.
This patch changes the name to refclk7273800hz, reflecting the
actual clock speed.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
arm: pxa: fixes for v4.0-rc5
There are only 2 fixes, one for the zeus board about the regulator changes,
where a typo prevented the zeus board from having a working can regulator,
and one regression triggered by the interrupts IRQ shift of 16 affecting all
boards.
* tag 'fixes-for-v4.0-rc5' of https://github.com/rjarzmik/linux:
ARM: pxa: fix pxa interrupts handling in DT
ARM: pxa: Fix typo in zeus.c
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix x86 syscall exit code bug that resulted in spurious non-execution
of TIF-driven user-return worklets, causing big trouble for things
like KVM that rely on user notifiers for correctness of their vcpu
model, causing crashes like double faults"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/entry: Check for syscall exit work with IRQs disabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parsic fixes from Helge Deller:
"One patch from Mikulas fixes a bug on parisc by artifically
incrementing the counter in pmd_free when the kernel tries to free
the preallocated pmd.
Other than that we now prevent that syscalls gets added without
incrementing __NR_Linux_syscalls and fix the initial pmd setup code
if a default page size greater than 4k has been selected"
* 'parisc-4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix pmd code to depend on PT_NLEVELS value, not on CONFIG_64BIT
parisc: mm: don't count preallocated pmds
parisc: Add compile-time check when adding new syscalls
|
|
Pull kvm ppc bugfixes from Marcelo Tosatti.
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Fix instruction emulation
KVM: PPC: Book3S HV: Endian fix for accessing VPA yield count
KVM: PPC: Book3S HV: Fix spinlock/mutex ordering issue in kvmppc_set_lpcr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"We found some issues with signal handling taking down the system. I
know its late, but these are important and all marked for stable.
ARC signal handling related fixes uncovered during recent testing of
NPTL tools"
* tag 'arc-4.0-fixes-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: signal handling robustify
ARC: SA_SIGINFO ucontext regs off-by-one
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"A couple of bug fixes for s390.
The ftrace comile fix is quite large for a -rc6 release, but it would
be nice to have it in 4.0"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/smp: reenable smt after resume
s390/mm: limit STACK_RND_MASK for compat tasks
s390/ftrace: fix compile error if CONFIG_KPROBES is disabled
s390/cpum_sf: add diagnostic sampling event only if it is authorized
|
|
A malicious signal handler / restorer can DOS the system by fudging the
user regs saved on stack, causing weird things such as sigreturn returning
to user mode PC but cpu state still being kernel mode....
Ensure that in sigreturn path status32 always has U bit; any other bogosity
(gargbage PC etc) will be taken care of by normal user mode exceptions mechanisms.
Reproducer signal handler:
void handle_sig(int signo, siginfo_t *info, void *context)
{
ucontext_t *uc = context;
struct user_regs_struct *regs = &(uc->uc_mcontext.regs);
regs->scratch.status32 = 0;
}
Before the fix, kernel would go off to weeds like below:
--------->8-----------
[ARCLinux]$ ./signal-test
Path: /signal-test
CPU: 0 PID: 61 Comm: signal-test Not tainted 4.0.0-rc5+ #65
task: 8f177880 ti: 5ffe6000 task.ti: 8f15c000
[ECR ]: 0x00220200 => Invalid Write @ 0x00000010 by insn @ 0x00010698
[EFA ]: 0x00000010
[BLINK ]: 0x2007c1ee
[ERET ]: 0x10698
[STAT32]: 0x00000000 : <--------
BTA: 0x00010680 SP: 0x5ffe7e48 FP: 0x00000000
LPS: 0x20003c6c LPE: 0x20003c70 LPC: 0x00000000
...
--------->8-----------
Reported-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
The regfile provided to SA_SIGINFO signal handler as ucontext was off by
one due to pt_regs gutter cleanups in 2013.
Before handling signal, user pt_regs are copied onto user_regs_struct and copied
back later. Both structs are binary compatible. This was all fine until
commit 2fa919045b72 (ARC: pt_regs update #2) which removed the empty stack slot
at top of pt_regs (corresponding to first pad) and made the corresponding
fixup in struct user_regs_struct (the pad in there was moved out of
@scratch - not removed altogether as it is part of ptrace ABI)
struct user_regs_struct {
+ long pad;
struct {
- long pad;
long bta, lp_start, lp_end,....
} scratch;
...
}
This meant that now user_regs_struct was off by 1 reg w.r.t pt_regs and
signal code needs to user_regs_struct.scratch to reflect it as pt_regs,
which is what this commit does.
This problem was hidden for 2 years, because both save/restore, despite
using wrong location, were using the same location. Only an interim
inspection (reproducer below) exposed the issue.
void handle_segv(int signo, siginfo_t *info, void *context)
{
ucontext_t *uc = context;
struct user_regs_struct *regs = &(uc->uc_mcontext.regs);
printf("regs %x %x\n", <=== prints 7 8 (vs. 8 9)
regs->scratch.r8, regs->scratch.r9);
}
int main()
{
struct sigaction sa;
sa.sa_sigaction = handle_segv;
sa.sa_flags = SA_SIGINFO;
sigemptyset(&sa.sa_mask);
sigaction(SIGSEGV, &sa, NULL);
asm volatile(
"mov r7, 7 \n"
"mov r8, 8 \n"
"mov r9, 9 \n"
"mov r10, 10 \n"
:::"r7","r8","r9","r10");
*((unsigned int*)0x10) = 0;
}
Fixes: 2fa919045b72ec892e "ARC: pt_regs update #2: Remove unused gutter at start of pt_regs"
CC: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|