summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2015-03-02KVM: MIPS: Enable after disabling interruptTapasweni Pathak
Enable disabled interrupt, on unsuccessful operation. Found by Coccinelle. Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-02KVM: MIPS: Fix trace event to save PC directlyJames Hogan
Currently the guest exit trace event saves the VCPU pointer to the structure, and the guest PC is retrieved by dereferencing it when the event is printed rather than directly from the trace record. This isn't safe as the printing may occur long afterwards, after the PC has changed and potentially after the VCPU has been freed. Usually this results in the same (wrong) PC being printed for multiple trace events. It also isn't portable as userland has no way to access the VCPU data structure when interpreting the trace record itself. Lets save the actual PC in the structure so that the correct value is accessible later. Fixes: 669e846e6c4e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # v3.10+ Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-02-21Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS: - a number of fixes that didn't make the 3.19 release. - a number of cleanups. - preliminary support for Cavium's Octeon 3 SOCs which feature up to 48 MIPS64 R3 cores with FPU and hardware virtualization. - support for MIPS R6 processors. Revision 6 of the MIPS architecture is a major revision of the MIPS architecture which does away with many of original sins of the architecture such as branch delay slots. This and other changes in R6 require major changes throughout the entire MIPS core architecture code and make up for the lion share of this pull request. - finally some preparatory work for eXtendend Physical Address support, which allows support of up to 40 bit of physical address space on 32 bit processors" [ Ahh, MIPS can't leave the PAE brain damage alone. It's like every CPU architect has to make that mistake, but pee in the snow by changing the TLA. But whether it's called PAE, LPAE or XPA, it's horrid crud - Linus ] * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits) MIPS: sead3: Corrected get_c0_perfcount_int MIPS: mm: Remove dead macro definitions MIPS: OCTEON: irq: add CIB and other fixes MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs. MIPS: OCTEON: More OCTEONIII support MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits. MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup. MIPS: OCTEON: Update octeon-model.h code for new SoCs. MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h MIPS: OCTEON: Implement the core-16057 workaround MIPS: OCTEON: Delete unused COP2 saving code MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register MIPS: OCTEON: Save and restore CP2 SHA3 state MIPS: OCTEON: Fix FP context save. MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs MIPS: boot: Provide more uImage options MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h MIPS: ip22-gio: Remove legacy suspend/resume support mips: pci: Add ifdef around pci_proc_domain ...
2015-02-21Merge tag 'clk-for-linus-3.20' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clock framework updates from Mike Turquette: "The clock framework changes contain the usual driver additions, enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based devices. Additionally the framework core underwent a bit of surgery with two major changes: - The boundary between the clock core and clock providers (e.g clock drivers) is now more well defined with dedicated provider helper functions. struct clk no longer maps 1:1 with the hardware clock but is a true per-user cookie which helps us tracker users of hardware clocks and debug bad behavior. - The addition of rate constraints for clocks. Rate ranges are now supported which are analogous to the voltage ranges in the regulator framework. Unfortunately these changes to the core created some breakeage. We think we fixed it all up but for this reason there are lots of last minute commits trying to undo the damage" * tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux: (113 commits) clk: Only recalculate the rate if needed Revert "clk: mxs: Fix invalid 32-bit access to frac registers" clk: qoriq: Add support for the platform PLL powerpc/corenet: Enable CLK_QORIQ clk: Replace explicit clk assignment with __clk_hw_set_clk clk: Add __clk_hw_set_clk helper function clk: Don't dereference parent clock if is NULL MIPS: Alchemy: Remove bogus args from alchemy_clk_fgcs_detr clkdev: Always allocate a struct clk and call __clk_get() w/ CCF clk: shmobile: div6: Avoid division by zero in .round_rate() clk: mxs: Fix invalid 32-bit access to frac registers clk: omap: compile legacy omap3 clocks conditionally clkdev: Export clk_register_clkdev clk: Add rate constraints to clocks clk: remove clk-private.h pci: xgene: do not use clk-private.h arm: omap2+ remove dead clock code clk: Make clk API return per-user struct clk instances clk: tegra: Define PLLD_DSI and remove dsia(b)_mux clk: tegra: Add support for the Tegra132 CAR IP block ...
2015-02-20MIPS: sead3: Corrected get_c0_perfcount_intNiklas Cassel
Commit e9de688dac65 ("irqchip: mips-gic: Support local interrupts") updated several platforms. This is a copy paste error. Signed-off-by: Niklas Cassel <niklass@axis.com> Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9245/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: mm: Remove dead macro definitionsAndreas Ruprecht
In commit c441d4a54c6e ("MIPS: mm: Only build one microassembler that is suitable"), the Makefile at arch/mips/mm was rewritten to only build the "right" microassembler file, depending on whether CONFIG_CPU_MICROMIPS is set or not. In the files, however, there are still preprocessor definitions depending on CONFIG_CPU_MICROMIPS. The #ifdef around them can now never evaluate to true, so let's remove them altogether. This inconsistency was found using the undertaker-checkpatch tool. Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Valentin Rothberg <valentinrothberg@gmail.com> Cc: Paul Bolle <pebolle@tiscali.nl> Patchwork: https://patchwork.linux-mips.org/patch/9267/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: irq: add CIB and other fixesDavid Daney
- Use of_irq_init() to initialize interrupt controllers - Get rid of some unlikely() - Add CIB to support SATA and other interrupts - Add support for CIU SUM2 interrupt sources Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Leonid Rosenboim <lrosenboim@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Signed-off-by: Peter Swain <peter.swain@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8947/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs.David Daney
The acknowledge bits don't exist for level triggered irqs, so setting them causes the simulator to terminate. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Leonid Rosenboim <lrosenboim@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8946/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: More OCTEONIII supportChandrakala Chavva
Read clock rate from the correct CSR. Don't clear COP0_DCACHE for OCTEONIII. Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8945/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits.Chad Reese
CN38XX pass 1 required icache prefetching to be turned off. This chip never reached production and is long dead. Other processor specific icache settings are done by the bootloader. Remove these bits from the kernel. Signed-off-by: Chad Reese <kreese@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/8944/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup.David Daney
Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8943/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Update octeon-model.h code for new SoCs.David Daney
Add coverage for OCTEON III models. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8942/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Implement DCache errata workaround for all CN6XXXDavid Daney
Make messages refer to all CN6XXX. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8941/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.hDavid Daney
Also update union octeon_cvmemctl with new OCTEON II fields. [aleksey.makarov@auriga.com: use __BITFIELD_FIELD] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8940/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Implement the core-16057 workaroundDavid Daney
Disable ICache prefetch for certian Octeon II processors. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8938/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Delete unused COP2 saving codeAleksey Makarov
Commit 2c952e06e4f5 ("MIPS: Move cop2 save/restore to switch_to()") removes assembler code to store COP2 registers. Commit a36d8225bceb ("MIPS: OCTEON: Enable use of FPU") mistakenly restores it Fixes: a36d8225bceb ("MIPS: OCTEON: Enable use of FPU") Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/8937/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Use correct instruction to read 64-bit COP0 registerChandrakala Chavva
Use dmfc0/dmtc0 instructions for reading CvmMemCtl COP0 register, its a 64-bit wide. Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/8936/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Save and restore CP2 SHA3 stateDavid Daney
Allocate new save space, and then save/restore the registers if OCTEON III. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8935/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Fix FP context save.David Daney
It wasn't being saved on task switch. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8934/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUsDavid Daney
The wide multiplier is twice as wide, so we need to save twice as much state. Detect the multiplier type (CPU type) at start up and install model specific handlers. [aleksey.makarov@auriga.com: conflict resolution, support for old compilers] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Leonid Rosenboim <lrosenboim@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8933/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: boot: Provide more uImage optionsMarkos Chandras
Allow more compression algorithms as well as uncompressed uImage.bin to be generated. An uncompressed image might be useful to rule out problems in the decompression code in the bootloader or even speed up the boot process at the expense of a bigger uImage file. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9271/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.hDavid Daney
Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8737/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: ip22-gio: Remove legacy suspend/resume supportLars-Peter Clausen
There are currently no gio device drivers that implement suspend/resume and this patch removes the bus specific legacy suspend and resume callbacks. This will allow us to eventually remove struct bus_type legacy suspend and resume support altogether. gio device drivers wanting to implement suspend and resume can use dev PM ops which will work out of the box without further modifications necessary. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8920/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20mips: pci: Add ifdef around pci_proc_domainZubair Lutfullah Kakakhel
Without these, there are multiple definitions of pci_proc_domain() and pci_domain_nr() if linux/pci.h and asm/pci.h are included. Add #ifdefs around them Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Markos.Chandras@imgtec.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8670/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: Fix cpu clock calculationManuel Lauss
The current code uses bits 0-6 of the sys_cpupll register to calculate core clock speed. However this is only valid on Au1300, on all earlier models the hardware only uses bits 0-5 to generate core clock. This fixes clock calculation on the MTX1 (Au1500), where bit 6 of cpupll is set as well, which ultimately lead the code to calculate a bogus cpu core clock and also uart base clock down the line. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Reported-by: John Crispin <blogic@openwrt.org> Tested-by: Bruno Randolf <br1@einfach.org> Cc: stable@vger.kernel.org [v3.17+] Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9279/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: remove declaration for set_cpuspecManuel Lauss
set_cpuspec() has been dropped with commit 074cf656700ddd1d2bd7f815f78e785418beb898 ("MIPS: Alchemy: remove cpu_table.") in late 2008. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9150/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: preset loops_per_jiffy based on CPU clockManuel Lauss
This was lost during the rewrite of clock framework support. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9149/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Alchemy: fix Au1000/Au1500 LRCLK calculationManuel Lauss
The Au1000 and Au1500 calculate the LRCLK a bit differently than newer models: a single bit in MEM_STCFG0 selects if pclk is divided by 4 or 5. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9148/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-20MIPS: Add set/clear CP0 macros for PageGrain registerSteven J. Hill
Build set and clear macros for the PageGrain register. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9289/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: Usage and cosmetic cleanups of page table bits.Steven J. Hill
* Clean up white spaces and tabs. * Get rid of remaining hardcoded values for calculating shifts and masks. * Get rid of redundant macro values. * Do not use page table bits directly in #ifdef's. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9287/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19Merge branch 'kconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
2015-02-19Merge branch 'mipsr6-for-3.20' of ↵Ralf Baechle
git://git.linux-mips.org/pub/scm/mchandras/linux into mips-for-linux-next
2015-02-19MIPS: Export MSA functions used by lose_fpu(1) for KVMJames Hogan
Export the _save_msa asm function used by the lose_fpu(1) macro to GPL modules so that KVM can make use of it when it is built as a module. This fixes the following build error when CONFIG_KVM=m and CONFIG_CPU_HAS_MSA=y due to commit f798217dfd03 ("KVM: MIPS: Don't leak FPU/DSP to guest"): ERROR: "_save_msa" [arch/mips/kvm/kvm.ko] undefined! Fixes: f798217dfd03 (KVM: MIPS: Don't leak FPU/DSP to guest) Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/9261/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: Export FP functions used by lose_fpu(1) for KVMJames Hogan
Export the _save_fp asm function used by the lose_fpu(1) macro to GPL modules so that KVM can make use of it when it is built as a module. This fixes the following build error when CONFIG_KVM=m due to commit f798217dfd03 ("KVM: MIPS: Don't leak FPU/DSP to guest"): ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined! Signed-off-by: James Hogan <james.hogan@imgtec.com> Fixes: f798217dfd03 (KVM: MIPS: Don't leak FPU/DSP to guest) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.10+ Patchwork: https://patchwork.linux-mips.org/patch/9260/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: BCM3384: Fix outdated use of mips_cpu_intc_init()Kevin Cernekee
This function was renamed to mips_cpu_irq_of_init(), so fix it to avoid a compile error. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8834/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: Provide correct siginfo_t.si_stimePetr Malat
Provide correct siginfo_t.si_stime on MIPS64 Bug description: MIPS version of copy_siginfo() is not aware of alignment on platforms with 64-bit long integers, which leads to an incorrect si_stime passed to signal handlers, because the last element (si_stime) of _sifields._sigchld is not copied. If _MIPS_SZLONG is 64, then the _sifields starts at the offset of 4 * sizeof(int). Patch description: Use the generic copy_siginfo, which doesn't have this problem. Signed-off-by: Petr Malat <oss@malat.biz> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8671/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGSMarkos Chandras
We need to check the ASEs support against the core's CFLAGS instead of depending to the default -march option from the toolchain. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9180/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-19MIPS: Makefile: Pass -march option on Loongson3A coresRalf Baechle
The loongson 3A cores do not select a suitable -march option so the build system uses the default one from the toolchain. This may or may not be suitable for a loongson 3A build. In order to avoid that, we explicitly set a suitable -march option for that core. Furthermore, some very old compilers don't support -march= at all and there is the possibility of toolchain combinations such as GCC 4.9 and binutils 2.24 for which -march=loongson3a will result in MIPS64 R2 code being generated but then rejected by GAS. So treat the Longsoon 3A as an R2 CPU. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-18MIPS: Alchemy: Remove bogus args from alchemy_clk_fgcs_detrTomeu Vizoso
They were added to this function by mistake when they were added to the clk_ops.determine_rate callback. Fixes: 1c8e600440c7 ("clk: Add rate constraints to clocks") Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-18Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "NAND: - Add new Hisilicon NAND driver for Hip04 - Add default reboot handler, to ensure all outstanding erase transactions complete in time - jz4740: convert to use GPIO descriptor API - Atmel: add support for sama5d4 - Change default bitflip threshold to 75% of correction strength - Miscellaneous cleanups and bugfixes SPI NOR: - Freescale QuadSPI: - Fix a few probe() and remove() issues - Add a MAINTAINERS entry for this driver - Tweak transfer size to increase read performance - Add suspend/resume support - Add Micron quad I/O support - ST FSM SPI: miscellaneous fixes JFFS2: - gracefully handle corrupted 'offset' field found on flash Other: - bcm47xxpart: add tweaks for a few new devices - mtdconcat: set return lengths properly for mtd_write_oob() - map_ram: enable use with mtdoops - maps: support fallback to ROM/UBI for write-protected NOR flash" * tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits) mtd: hisilicon: && vs & typo jffs2: fix handling of corrupted summary length mtd: hisilicon: add device tree binding documentation mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc mtd: avoid registering reboot notifier twice mtd: concat: set the return lengths properly mtd: kconfig: replace PPC_OF with PPC mtd: denali: remove unnecessary stubs mtd: nand: remove redundant local variable MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver mtd: fsl-quadspi: improve read performance by increase AHB transfer size mtd: fsl-quadspi: Remove unnecessary 'map_failed' label mtd: fsl-quadspi: Remove unneeded success/error messages mtd: fsl-quadspi: Fix the error paths mtd: nand: omap: drop condition with no effect mtd: nand: jz4740: Convert to GPIO descriptor API mtd: nand: Request strength instead of bytes for soft BCH mtd: nand: default bitflip-reporting threshold to 75% of correction strength mtd: atmel_nand: introduce a new compatible string for sama5d4 chip mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction() ...
2015-02-17MIPS: Add Malta QEMU 32R6 defconfigMarkos Chandras
Add a Malta defconfig for the 32-bit MIPS R6 core as emulated by QEMU. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Malta: Add support for building MIPS R6 kernelMarkos Chandras
The Malta platform supports MIPS R6 (via QEMU or real bitstreams) so add support for it. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: elf: Improve the overall ABI and FPU mode checksMarkos Chandras
The previous implementation did not cover all possible FPU combinations and it silently allowed ABI incompatible objects to be loaded with the wrong ABI. For example, the previous logic would set the FP_64 ABI as the matching ABI for an FP_XX object combined with an FP_64A object. This was wrong, and the matching ABI should have been FP_64A. The previous logic is now replaced with a new one which determines the appropriate FPU mode to be used rather than the FP ABI. This has the advantage that the entire logic is much simpler since it is the FPU mode we are interested in rather than the FP ABI resulting to code simplifications. This also removes the now obsolete FP32XX_HYBRID_FPRS option. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6Markos Chandras
MIPS32 R6 has a 64-bit FPU so add the necessary MIPS R6 definition. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: process: Do not allow FR=0 on MIPS R6Markos Chandras
A prctl() call to set FR=0 for MIPS R6 should not be allowed since FR=1 is the only option for R6 cores. Cc: Paul Burton <paul.burton@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Handle MIPS IV, V and R2 FPU instructions on MIPS R6 as wellMarkos Chandras
MIPS R2 FPU instructions are also present in MIPS R6 so amend the preprocessor definitions to take MIPS R6 into consideration. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Make use of the ERETNC instruction on MIPS R6Markos Chandras
The ERETNC instruction, introduced in MIPS R5, is similar to the ERET one, except it does not clear the LLB bit in the LLADDR register. This feature is necessary to safely emulate R2 LL/SC instructions. However, on context switches, we need to clear the LLAddr/LLB bit in order to make sure that an SC instruction from the new thread will never succeed if it happens to interrupt an LL operation on the same address from the previous thread. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6Leonid Yegoshin
MIPS R6 removed quite a few R2 instructions. However, there is plenty of <R6 userland code so we add an in-kernel emulator so we can still be able to execute all R2 userland out there. The emulator comes with a handy debugfs under /mips/ directory (r2-emul-stats) to provide some basic statistics of the instructions that are being emulated. Below are some statistics from booting a minimal buildroot image: Instruction Total BDslot ------------------------------ movs 236969 0 hilo 56686 0 muls 55279 0 divs 10941 0 dsps 0 0 bops 1 0 traps 0 0 fpus 0 0 loads 214981 17 stores 103364 0 llsc 56898 0 dsemul 150418 0 jr 370158 bltzl 43 bgezl 1594 bltzll 0 bgezll 0 bltzal 39 bgezal 39 beql 14503 bnel 138741 blezl 0 bgtzl 3988 Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: mipsregs: Add support for the LLADDR registerMarkos Chandras
If Config5/LLB is set in the core, then software can write the LLB bit in the LLADDR register. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Add LLB bit and related feature for the Config 5 CP0 registerMarkos Chandras
The LLBIT (bit 4) in the Config5 CP0 register indicates the software availability of the Load-Linked bit. This bit is only set by hardware and it has the following meaning: 0: LLB functionality is not supported 1: LLB functionality is supported. The following feature are also supported: - ERETNC instruction. Similar to ERET but it does not clear the LLB bit in the LLAddr register. - CP0 LLAddr/LLB bit must be set - LLbit is software accessible through the LLAddr[0] This will be used later on to emulate R2 LL/SC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>