summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/armada-38x.dtsi
AgeCommit message (Collapse)Author
2015-02-17Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
2015-02-13ARM: mvebu: add Device Tree description of RTC on Armada 38xGregory CLEMENT
The Marvell Armada 38x SoCs contains an RTC which differs from the RTC used in the other mvebu SoCs until now. This commit adds the Device Tree description of this interface at the SoC level. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Arnaud Ebalard <arno@natisbad.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Boris BREZILLON <boris.brezillon@free-electrons.com> Cc: Lior Amsalem <alior@marvell.com> Cc: Tawfik Bayouk <tawfik@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-26ARM: mvebu: armada-38x: Relicense the device tree under GPLv2+/X11Gregory CLEMENT
The current GPL only licensing on the device tree makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Marcin Wojtas <mw@semihalf.com> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2015-01-10ARM: mvebu: fix compatible strings of MBus on Armada 375 and Armada 38xThomas Petazzoni
Due to the special handling of window 13 on Armada 375 and Armada 38x (similar to Armada XP), the MBus hardware block is *not* compatible with the one used on Armada 370. Using the Armada 370 compatible string on Armada 375 and 38x will lead to a non-working device if window 13 ends up being used. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09ARM: mvebu: a38x: Add missing labelsGregory CLEMENT
The pintcrl label was missing. Adding it allowed referring it from the root of the device tree. Also add the uart0 label used by the bootloader. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09ARM: mvebu: a38x: Add more pinctrl functionsGregory CLEMENT
With the Armada 385 GP board more pinctrl functions depending of the SoC are needed. Add them to the DTSI to avoid duplication. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09ARM: mvebu: Add a number of pinctrl functionsMaxime Ripard
Some pinctrl functions can be shared with all DTS out there, since they are generic, SoC-wide muxing options. Add a number of these to the DTSI to avoid duplication. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09ARM: mvebu: A38x: Remove redundant pinctrl informationsMaxime Ripard
The compatible set in the armada-38x DTSI is always overridden, and the reg defined in there is duplicated in the armada-380 and armada-385 DTSIs. Remove these useless items. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-09ARM: mvebu: a38x: Fix node namesMaxime Ripard
Some nodes in the DTs have a reg property but no unit name in their node name. This contradicts the way the ePAPR defines the node names. Fix this. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2014-11-22ARM: mvebu: adjust ethernet aliases according to U-Boot requirements for A38xMarcin Wojtas
In order to update MAC address entries in the ethernet nodes in Device Tree both mainline U-Boot and Barebox bootloaders accept the same format of aliases, which is 'ethernetX', where X stands for an interface number. Other platforms in the mainline Linux, that comprise ethernet references in '/aliases' node (like various flavours of imx or sunXi), follow the naming scheme described above. This commit ajusts ethernet aliases of Marvell Armada 38x SoC to be properly recognized by bootloaders' MAC address fixup routines. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1415980652-7429-5-git-send-email-mw@semihalf.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-20Merge tag 'mvebu-dt-3.17-2' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson
Merge "ARM: mvebu: DT changes for v3.17 (round 2)" from Jason Cooper: mvebu DT changes for v3.17 (round 2): - kirkwood * Add d2 Network v2 board - mvebu * Add Armada 375 ethernet node * Add CA9 MPcore SoC controller node * Add support for dynamic freq scaling on Armada XP * tag 'mvebu-dt-3.17-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: update Armada XP DT for dynamic frequency scaling ARM: mvebu: add CA9 MPcore SoC Controller node ARM: mvebu: Enable the network controller in Armada 375 DB board ARM: mvebu: Add support for the network controller in Armada 375 SoC ARM: Kirkwood: add DT support for d2 Network v2 ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16ARM: mvebu: add CA9 MPcore SoC Controller nodeGregory CLEMENT
The CA9 MPcore SoC Control block is a set of registers that allows to configure certain internal aspects of the core blocks of the SoC (Cortex-A9, L2 cache controller, etc.). In most cases, the default values are fine so they aren't many reasons to touch those registers, but there is one exception: to support cpuidle on Armada 38x, we need to modify the value of the CA9 MPcore Reset Control register. Therefore, this commit adds a new Device Tree binding for this hardware block, and uses this new binding for the Armada 38x Device Tree file. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: devicetree@vger.kernel.org Link: https://lkml.kernel.org/r/1404913221-17343-11-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-24ARM: mvebu: Fix the improper use of the compatible string armada38x using a ↵Gregory CLEMENT
wildcard Wildcards in compatible strings should be avoid. "marvell,armada38x" was recently introduced but was not yet used. The armada 385 SoC is a superset of the armada 380 SoC (with more CPUs and more PCIe slots). So this patch replaces the use of "marvell,armada38x" by the "marvell,armada380" string. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1403533011-21339-1-git-send-email-gregory.clement@free-electrons.com Acked-by: Andrew Lunn <andrew@lunn.ch> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-23Merge tag 'mvebu-dt-3.16-2' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann
Merge "mvebu DT changes for v3.16 (incremental #2)" from Jason Cooper: - kirkwood - add OpenRD boards - make keymile boards bootable with latest kernels - mvebu - add ehci/xhci to Armada 375/38x boards * tag 'mvebu-dt-3.16-2' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: add kirkwood-km_fixedeth DTS file ARM: dts: kirkwood: add kirkwood-km_common DTSI files ARM: dts: kirkwood: resynch 98dx4122 dtsi ARM: mvebu: add Device Tree description for the EHCI controllers on Armada 375 ARM: mvebu: add Device Tree description of the xHCI controller on Armada 375 ARM: mvebu: add Device Tree description of the EHCI controller on Armada 38x ARM: mvebu: add Device Tree description of xHCI controllers on Armada 38x ARM: Kirkwood: DT versions of OpenRD boards Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-19Merge tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson
Merge "ARM: mvebu: DT changes for v3.16" from Jason Cooper: mvebu DT changes for v3.16 - kirkwood - rework nsa3x0 board to add nsa320 - large cleanup to facilitate use in barebox - guruplug phy updates - audio updates for t5325 - mvebu - use clocks vice clock-frequency for uart nodes - armada 375/380/385 - add watchdog node - add coherency fabric - add smp support - add sdhci - add ahci - add thermal sensor - armada 370/XP - and pmsu * tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu: (35 commits) ARM: Kirkwood: t5325: Use simple card to instantiate audio ARM: Kirkwood: DT: Add missing #sound-dai-cells property ARM: Kirkwood: Add node for audio codec ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id ARM: dts: kirkwood: set Guruplug ethernet PHY compatible ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282 ARM: dts: kirkwood: set default pinctrl for I2C0 ARM: dts: kirkwood: set default pinctrl for NAND ARM: dts: kirkwood: set default pinctrl for SPI0 ARM: dts: kirkwood: set default pinctrl for UART0/1 ARM: dts: kirkwood: set default pinctrl for GBE1 ARM: dts: kirkwood: consolidate common pinctrl settings ARM: dts: kirkwood: add pinctrl node to common SoC include ARM: dts: kirkwood: rename pin-controller nodes ARM: dts: kirkwood: remove clock-frequency properties from UART nodes ARM: dts: kirkwood: add stdout-path property to all boards ARM: dts: kirkwood: add node labels ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC ARM: mvebu: Enable the thermal sensor in Armada 375 SoC ARM: mvebu: don't use clocks property in UART node for Netgear RN2120 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-16ARM: mvebu: add Device Tree description of the EHCI controller on Armada 38xGregory CLEMENT
The Marvell Armada 38x SoCs contains one EHCI controller. This commit adds the Device Tree description of this interface at the SoC level, and also enables the USB2 port on the Armada 385 DB platform. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1400149062-32661-16-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-16ARM: mvebu: add Device Tree description of xHCI controllers on Armada 38xGregory CLEMENT
The Marvell Armada 38x SoCs contains two xHCI controllers. This commit adds the Device Tree description of those interfaces at the SoC level, and also enables the two USB3 ports on the Armada 385 DB platform and one USB3 port on the Armada 385 RD platform. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1400149062-32661-15-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-28ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoCEzequiel Garcia
This commit enables the thermal sensor found in Armada 380/385 SoCs. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1398371004-15807-11-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-26ARM: mvebu: use clocks property for serial portsThomas Petazzoni
Back when the Armada 370 and Armada XP initial support was introduced, the only way to pass the clock frequency to the of_serial driver was through a clock-frequency Device Tree property. Thanks to 0bbeb3c3e84bc963d1c66661e082d207023b0e5c ('of serial port driver - add clk_get_rate() support'), it is possible to use the standard 'clocks' DT property to reference the clock used for a particular UART controller. This clock is then used by the of_serial driver to retrieve the clock rate. This commit modifies the SoC-level Device Tree files of Armada 370, Armada XP, Armada 375 and Armada 38x to use this possibility. Since there is no gatable clock for the UART controllers, we simply reference the TCLK, which is the main SoC clock for the peripherals. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1397806908-7550-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-26ARM: mvebu: add Device Tree description of AHCI interfaces on Armada 38xThomas Petazzoni
The Marvell Armada 38x processors contain two AHCI compatible interfaces. This commit adds the Device Tree description of those interfaces at the SoC level, and also enables them on the Armada 385 DB platform, which allows access to both interfaces through SATA ports. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397574006-5868-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-25ARM: mvebu: enable the SDHCI interface on Armada 385Thomas Petazzoni
In commit "mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller", the sdhci-pxav3 driver has been extended to also be usable on Armada 38x platforms. Therefore, this commit adds the necessary Device Tree informations to declare this SDHCI interface in the Armada 38x SoC, and also in the Armada 385 Development Board. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1397486478-16991-2-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-24ARM: mvebu: add SMP support in the Armada 38x device treeThomas Petazzoni
This commit improves the Armada 38x Device Tree to add the CPU reset and PMSU Device Tree nodes as well as the declaration of the enabling method for the CPUs. These are needed to get SMP working on Armada 38x platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397483648-26611-12-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-24ARM: mvebu: enable the coherency fabric on Armada 38xThomas Petazzoni
This commit adds the necessary Device Tree information to enable the coherency fabric on Armada 38x. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397483228-25625-11-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-24ARM: mvebu: Enable Armada 380/385 watchdog in the devicetreeEzequiel Garcia
Add the DT nodes to enable the watchdog support available on Armada 380/385 SoC. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1397481813-4962-9-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-07ARM: mvebu: ensure the mdio node has a clock reference on Armada 38xThomas Petazzoni
The mvmdio driver accesses some register of the Ethernet unit. It therefore takes a reference and enables a clock. However, on Armada 38x, no clock specification was given in the Device Tree, which leads the mvmdio driver to fail when being used as a module and loaded before the mvneta driver: it tries to access a register from a hardware unit that isn't clocked. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1395790439-21332-3-git-send-email-thomas.petazzoni@free-electrons.com Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-13ARM: mvebu: Add support for NAND controller in Armada 38x SoCEzequiel Garcia
The Armada 38x SoC family has a NAND controller, compatible with the controller in Armada 370/375/XP SoCs. Add support for it in the devicetree file. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1394742273-5113-5-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-13ARM: mvebu: Add the Core Divider clock to Armada 38x SoCsEzequiel Garcia
The Armada 38x SoC family has a clock provider called "Core Divider", derived from the fixed 2 GHz main PLL clock. This is similar to the one on A370, A375 and AXP. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1394742273-5113-4-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-13ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCsEzequiel Garcia
Armada 38x SoCs have a 2 GHz fixed main PLL that is used to feed other clocks. This commit adds a DT representation of this clock through a fixed-clock compatible node. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1394742273-5113-3-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22ARM: mvebu: use macros for interrupt flags on Armada 375/38xThomas Petazzoni
Instead of hardcoding the values of the interrupt flags, use the macros provided by <include/dt-bindings/interrupt-controller/irq.h> and <include/dt-bindings/interrupt-controller/arm-gic.h> for the Armada 375 and Armada 38x Device Tree files. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTsThomas Petazzoni
Instead of hardcoding 0 and 1 to indicate SPI and PPI GIC interrupts, use the definitions of <dt-bindings/interrupt-controller/arm-gic.h> to clarify the Device Tree code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-17ARM: mvebu: add Device Tree description of the Armada 380/385 SoCsThomas Petazzoni
The Armada 380 and 385 SoCs are new SoCs from Marvell, based on a Cortex-A9 cores (single core for 380, dual core for 385) and a number of hardware blocks that are common with earlier SoCs from the mvebu family. The provided Device Tree describes the following parts of the SoC: * CPU * Device Bus * Clocks * Interrupt controllers: GIC and MPIC * GPIO controllers * I2C buses * L2 cache * MBus controller * Pinctrl * Serial * SPI buses * System controller (for reboot) * Timer * XOR engines * PCIe controllers * Network interfaces Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-02 10:43:14 +0000