diff options
Diffstat (limited to 'include/drm/drm_crtc.h')
-rw-r--r-- | include/drm/drm_crtc.h | 110 |
1 files changed, 105 insertions, 5 deletions
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 969da0f1ded8..f444263055c5 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -63,8 +63,16 @@ struct drm_mode_object { #define DRM_OBJECT_MAX_PROPERTY 24 struct drm_object_properties { - int count; - uint32_t ids[DRM_OBJECT_MAX_PROPERTY]; + int count, atomic_count; + /* NOTE: if we ever start dynamically destroying properties (ie. + * not at drm_mode_config_cleanup() time), then we'd have to do + * a better job of detaching property from mode objects to avoid + * dangling property pointers: + */ + struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY]; + /* do not read/write values directly, but use drm_object_property_get_value() + * and drm_object_property_set_value(): + */ uint64_t values[DRM_OBJECT_MAX_PROPERTY]; }; @@ -137,6 +145,14 @@ struct drm_display_info { u8 cea_rev; }; +/* data corresponds to displayid vend/prod/serial */ +struct drm_tile_group { + struct kref refcount; + struct drm_device *dev; + int id; + u8 group_data[8]; +}; + struct drm_framebuffer_funcs { /* note: use drm_framebuffer_remove() */ void (*destroy)(struct drm_framebuffer *framebuffer); @@ -229,7 +245,9 @@ struct drm_atomic_state; /** * struct drm_crtc_state - mutable CRTC state + * @crtc: backpointer to the CRTC * @enable: whether the CRTC should be enabled, gates all other state + * @active: whether the CRTC is actively displaying (used for DPMS) * @mode_changed: for use by helpers and drivers when computing state updates * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes * @last_vblank_count: for helpers and drivers to capture the vblank of the @@ -240,9 +258,18 @@ struct drm_atomic_state; * @event: optional pointer to a DRM event to signal upon completion of the * state update * @state: backpointer to global drm_atomic_state + * + * Note that the distinction between @enable and @active is rather subtile: + * Flipping @active while @enable is set without changing anything else may + * never return in a failure from the ->atomic_check callback. Userspace assumes + * that a DPMS On will always succeed. In other words: @enable controls resource + * assignment, @active controls the actual hardware state. */ struct drm_crtc_state { + struct drm_crtc *crtc; + bool enable; + bool active; /* computed state bits used by helpers and drivers */ bool planes_changed : 1; @@ -284,6 +311,9 @@ struct drm_crtc_state { * @atomic_duplicate_state: duplicate the atomic state for this CRTC * @atomic_destroy_state: destroy an atomic state for this CRTC * @atomic_set_property: set a property on an atomic state for this CRTC + * (do not call directly, use drm_atomic_crtc_set_property()) + * @atomic_get_property: get a property on an atomic state for this CRTC + * (do not call directly, use drm_atomic_crtc_get_property()) * * The drm_crtc_funcs structure is the central CRTC management structure * in the DRM. Each CRTC controls one or more connectors (note that the name @@ -343,6 +373,10 @@ struct drm_crtc_funcs { struct drm_crtc_state *state, struct drm_property *property, uint64_t val); + int (*atomic_get_property)(struct drm_crtc *crtc, + const struct drm_crtc_state *state, + struct drm_property *property, + uint64_t *val); }; /** @@ -441,11 +475,14 @@ struct drm_crtc { /** * struct drm_connector_state - mutable connector state + * @connector: backpointer to the connector * @crtc: CRTC to connect connector to, NULL if disabled * @best_encoder: can be used by helpers and drivers to select the encoder * @state: backpointer to global drm_atomic_state */ struct drm_connector_state { + struct drm_connector *connector; + struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_connector() */ struct drm_encoder *best_encoder; @@ -455,7 +492,7 @@ struct drm_connector_state { /** * struct drm_connector_funcs - control connectors on a given device - * @dpms: set power state (see drm_crtc_funcs above) + * @dpms: set power state * @save: save connector state * @restore: restore connector state * @reset: reset connector after state has been invalidated (e.g. resume) @@ -467,6 +504,9 @@ struct drm_connector_state { * @atomic_duplicate_state: duplicate the atomic state for this connector * @atomic_destroy_state: destroy an atomic state for this connector * @atomic_set_property: set a property on an atomic state for this connector + * (do not call directly, use drm_atomic_connector_set_property()) + * @atomic_get_property: get a property on an atomic state for this connector + * (do not call directly, use drm_atomic_connector_get_property()) * * Each CRTC may have one or more connectors attached to it. The functions * below allow the core DRM code to control connectors, enumerate available modes, @@ -500,6 +540,10 @@ struct drm_connector_funcs { struct drm_connector_state *state, struct drm_property *property, uint64_t val); + int (*atomic_get_property)(struct drm_connector *connector, + const struct drm_connector_state *state, + struct drm_property *property, + uint64_t *val); }; /** @@ -599,6 +643,15 @@ struct drm_encoder { * @bad_edid_counter: track sinks that give us an EDID with invalid checksum * @debugfs_entry: debugfs directory for this connector * @state: current atomic state for this connector + * @has_tile: is this connector connected to a tiled monitor + * @tile_group: tile group for the connected monitor + * @tile_is_single_monitor: whether the tile is one monitor housing + * @num_h_tile: number of horizontal tiles in the tile group + * @num_v_tile: number of vertical tiles in the tile group + * @tile_h_loc: horizontal location of this tile + * @tile_v_loc: vertical location of this tile + * @tile_h_size: horizontal size of this tile. + * @tile_v_size: vertical size of this tile. * * Each connector may be connected to one or more CRTCs, or may be clonable by * another connector if they can share a CRTC. Each connector also has a specific @@ -634,6 +687,8 @@ struct drm_connector { struct drm_property_blob *path_blob_ptr; + struct drm_property_blob *tile_blob_ptr; + uint8_t polled; /* DRM_CONNECTOR_POLL_* */ /* requested DPMS state */ @@ -661,10 +716,20 @@ struct drm_connector { struct dentry *debugfs_entry; struct drm_connector_state *state; + + /* DisplayID bits */ + bool has_tile; + struct drm_tile_group *tile_group; + bool tile_is_single_monitor; + + uint8_t num_h_tile, num_v_tile; + uint8_t tile_h_loc, tile_v_loc; + uint16_t tile_h_size, tile_v_size; }; /** * struct drm_plane_state - mutable plane state + * @plane: backpointer to the plane * @crtc: currently bound CRTC, NULL if disabled * @fb: currently bound framebuffer * @fence: optional fence to wait for before scanning out @fb @@ -681,6 +746,8 @@ struct drm_connector { * @state: backpointer to global drm_atomic_state */ struct drm_plane_state { + struct drm_plane *plane; + struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_plane() */ struct drm_framebuffer *fb; /* do not write directly, use drm_atomic_set_fb_for_plane() */ struct fence *fence; @@ -707,6 +774,9 @@ struct drm_plane_state { * @atomic_duplicate_state: duplicate the atomic state for this plane * @atomic_destroy_state: destroy an atomic state for this plane * @atomic_set_property: set a property on an atomic state for this plane + * (do not call directly, use drm_atomic_plane_set_property()) + * @atomic_get_property: get a property on an atomic state for this plane + * (do not call directly, use drm_atomic_plane_get_property()) */ struct drm_plane_funcs { int (*update_plane)(struct drm_plane *plane, @@ -730,6 +800,10 @@ struct drm_plane_funcs { struct drm_plane_state *state, struct drm_property *property, uint64_t val); + int (*atomic_get_property)(struct drm_plane *plane, + const struct drm_plane_state *state, + struct drm_property *property, + uint64_t *val); }; enum drm_plane_type { @@ -828,7 +902,7 @@ struct drm_bridge { /** * struct struct drm_atomic_state - the global state object for atomic updates * @dev: parent DRM device - * @flags: state flags like async update + * @allow_modeset: allow full modeset * @planes: pointer to array of plane pointers * @plane_states: pointer to array of plane states pointers * @crtcs: pointer to array of CRTC pointers @@ -840,7 +914,7 @@ struct drm_bridge { */ struct drm_atomic_state { struct drm_device *dev; - uint32_t flags; + bool allow_modeset : 1; struct drm_plane **planes; struct drm_plane_state **plane_states; struct drm_crtc **crtcs; @@ -978,6 +1052,7 @@ struct drm_mode_config { struct drm_modeset_acquire_ctx *acquire_ctx; /* for legacy _lock_all() / _unlock_all() */ struct mutex idr_mutex; /* for IDR management */ struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ + struct idr tile_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ /* this is limited to one for now */ struct mutex fb_lock; /* proctects global and per-file fb lists */ @@ -1021,8 +1096,19 @@ struct drm_mode_config { struct drm_property *edid_property; struct drm_property *dpms_property; struct drm_property *path_property; + struct drm_property *tile_property; struct drm_property *plane_type_property; struct drm_property *rotation_property; + struct drm_property *prop_src_x; + struct drm_property *prop_src_y; + struct drm_property *prop_src_w; + struct drm_property *prop_src_h; + struct drm_property *prop_crtc_x; + struct drm_property *prop_crtc_y; + struct drm_property *prop_crtc_w; + struct drm_property *prop_crtc_h; + struct drm_property *prop_fb_id; + struct drm_property *prop_crtc_id; /* DVI-I properties */ struct drm_property *dvi_i_subconnector_property; @@ -1192,6 +1278,7 @@ extern void drm_mode_config_cleanup(struct drm_device *dev); extern int drm_mode_connector_set_path_property(struct drm_connector *connector, const char *path); +int drm_mode_connector_set_tile_property(struct drm_connector *connector); extern int drm_mode_connector_update_edid_property(struct drm_connector *connector, const struct edid *edid); @@ -1261,6 +1348,10 @@ extern int drm_mode_create_scaling_mode_property(struct drm_device *dev); extern int drm_mode_create_aspect_ratio_property(struct drm_device *dev); extern int drm_mode_create_dirty_info_property(struct drm_device *dev); extern int drm_mode_create_suggested_offset_properties(struct drm_device *dev); +extern bool drm_property_change_valid_get(struct drm_property *property, + uint64_t value, struct drm_mode_object **ref); +extern void drm_property_change_valid_put(struct drm_property *property, + struct drm_mode_object *ref); extern int drm_mode_connector_attach_encoder(struct drm_connector *connector, struct drm_encoder *encoder); @@ -1328,6 +1419,13 @@ extern void drm_set_preferred_mode(struct drm_connector *connector, extern int drm_edid_header_is_valid(const u8 *raw_edid); extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid); extern bool drm_edid_is_valid(struct edid *edid); + +extern struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, + char topology[8]); +extern struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, + char topology[8]); +extern void drm_mode_put_tile_group(struct drm_device *dev, + struct drm_tile_group *tg); struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev, int hsize, int vsize, int fresh, bool rb); @@ -1345,6 +1443,8 @@ extern int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, extern int drm_mode_plane_set_obj_prop(struct drm_plane *plane, struct drm_property *property, uint64_t value); +extern int drm_mode_atomic_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); extern void drm_fb_get_bpp_depth(uint32_t format, unsigned int *depth, int *bpp); |