summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/calib.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/calib.c')
-rw-r--r--drivers/net/wireless/ath/ath9k/calib.c38
1 files changed, 32 insertions, 6 deletions
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 3e2e24e4843f..37f6d66d1671 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -241,6 +241,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
struct ath_common *common = ath9k_hw_common(ah);
s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
+ u32 bb_agc_ctl = REG_READ(ah, AR_PHY_AGC_CONTROL);
if (ah->caldata)
h = ah->caldata->nfCalHist;
@@ -264,6 +265,16 @@ int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
}
/*
+ * stop NF cal if ongoing to ensure NF load completes immediately
+ * (or after end rx/tx frame if ongoing)
+ */
+ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) {
+ REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
+ REG_RMW_BUFFER_FLUSH(ah);
+ ENABLE_REG_RMW_BUFFER(ah);
+ }
+
+ /*
* Load software filtered NF value into baseband internal minCCApwr
* variable.
*/
@@ -276,18 +287,33 @@ int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
/*
* Wait for load to complete, should be fast, a few 10s of us.
- * The max delay was changed from an original 250us to 10000us
- * since 250us often results in NF load timeout and causes deaf
- * condition during stress testing 12/12/2009
+ * The max delay was changed from an original 250us to 22.2 msec.
+ * This would increase timeout to the longest possible frame
+ * (11n max length 22.1 msec)
*/
- for (j = 0; j < 10000; j++) {
+ for (j = 0; j < 22200; j++) {
if ((REG_READ(ah, AR_PHY_AGC_CONTROL) &
- AR_PHY_AGC_CONTROL_NF) == 0)
+ AR_PHY_AGC_CONTROL_NF) == 0)
break;
udelay(10);
}
/*
+ * Restart NF so it can continue.
+ */
+ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) {
+ ENABLE_REG_RMW_BUFFER(ah);
+ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_ENABLE_NF)
+ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
+ AR_PHY_AGC_CONTROL_ENABLE_NF);
+ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NO_UPDATE_NF)
+ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
+ AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
+ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
+ REG_RMW_BUFFER_FLUSH(ah);
+ }
+
+ /*
* We timed out waiting for the noisefloor to load, probably due to an
* in-progress rx. Simply return here and allow the load plenty of time
* to complete before the next calibration interval. We need to avoid
@@ -296,7 +322,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
* here, the baseband nf cal will just be capped by our present
* noisefloor until the next calibration timer.
*/
- if (j == 10000) {
+ if (j == 22200) {
ath_dbg(common, ANY,
"Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n",
REG_READ(ah, AR_PHY_AGC_CONTROL));