diff options
Diffstat (limited to 'drivers/mtd/nand/gpmi-nand/gpmi-nand.c')
| -rw-r--r-- | drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 73 |
1 files changed, 60 insertions, 13 deletions
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 235ddcb58f39..8122c699ccf2 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1,7 +1,7 @@ /* * Freescale GPMI NAND Flash Driver * - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. + * Copyright (C) 2010-2015 Freescale Semiconductor, Inc. * Copyright (C) 2008 Embedded Alley Solutions, Inc. * * This program is free software; you can redistribute it and/or modify @@ -136,7 +136,7 @@ static inline bool gpmi_check_ecc(struct gpmi_nand_data *this) * * We may have available oob space in this case. */ -static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this) +static int set_geometry_by_ecc_info(struct gpmi_nand_data *this) { struct bch_geometry *geo = &this->bch_geometry; struct nand_chip *chip = &this->nand; @@ -145,7 +145,7 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this) unsigned int block_mark_bit_offset; if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0)) - return false; + return -EINVAL; switch (chip->ecc_step_ds) { case SZ_512: @@ -158,19 +158,19 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this) dev_err(this->dev, "unsupported nand chip. ecc bits : %d, ecc size : %d\n", chip->ecc_strength_ds, chip->ecc_step_ds); - return false; + return -EINVAL; } geo->ecc_chunk_size = chip->ecc_step_ds; geo->ecc_strength = round_up(chip->ecc_strength_ds, 2); if (!gpmi_check_ecc(this)) - return false; + return -EINVAL; /* Keep the C >= O */ if (geo->ecc_chunk_size < mtd->oobsize) { dev_err(this->dev, "unsupported nand chip. ecc size: %d, oob size : %d\n", chip->ecc_step_ds, mtd->oobsize); - return false; + return -EINVAL; } /* The default value, see comment in the legacy_set_geometry(). */ @@ -242,7 +242,7 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this) + ALIGN(geo->ecc_chunk_count, 4); if (!this->swap_block_mark) - return true; + return 0; /* For bit swap. */ block_mark_bit_offset = mtd->writesize * 8 - @@ -251,7 +251,7 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this) geo->block_mark_byte_offset = block_mark_bit_offset / 8; geo->block_mark_bit_offset = block_mark_bit_offset % 8; - return true; + return 0; } static int legacy_set_geometry(struct gpmi_nand_data *this) @@ -285,7 +285,8 @@ static int legacy_set_geometry(struct gpmi_nand_data *this) geo->ecc_strength = get_ecc_strength(this); if (!gpmi_check_ecc(this)) { dev_err(this->dev, - "required ecc strength of the NAND chip: %d is not supported by the GPMI controller (%d)\n", + "ecc strength: %d cannot be supported by the controller (%d)\n" + "try to use minimum ecc strength that NAND chip required\n", geo->ecc_strength, this->devdata->bch_max_ecc_strength); return -EINVAL; @@ -366,10 +367,11 @@ static int legacy_set_geometry(struct gpmi_nand_data *this) int common_nfc_set_geometry(struct gpmi_nand_data *this) { - if (of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc") - && set_geometry_by_ecc_info(this)) - return 0; - return legacy_set_geometry(this); + if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc")) + || legacy_set_geometry(this)) + return set_geometry_by_ecc_info(this); + + return 0; } struct dma_chan *get_dma_chan(struct gpmi_nand_data *this) @@ -2033,9 +2035,54 @@ static int gpmi_nand_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int gpmi_pm_suspend(struct device *dev) +{ + struct gpmi_nand_data *this = dev_get_drvdata(dev); + + release_dma_channels(this); + return 0; +} + +static int gpmi_pm_resume(struct device *dev) +{ + struct gpmi_nand_data *this = dev_get_drvdata(dev); + int ret; + + ret = acquire_dma_channels(this); + if (ret < 0) + return ret; + + /* re-init the GPMI registers */ + this->flags &= ~GPMI_TIMING_INIT_OK; + ret = gpmi_init(this); + if (ret) { + dev_err(this->dev, "Error setting GPMI : %d\n", ret); + return ret; + } + + /* re-init the BCH registers */ + ret = bch_set_geometry(this); + if (ret) { + dev_err(this->dev, "Error setting BCH : %d\n", ret); + return ret; + } + + /* re-init others */ + gpmi_extra_init(this); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops gpmi_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(gpmi_pm_suspend, gpmi_pm_resume) +}; + static struct platform_driver gpmi_nand_driver = { .driver = { .name = "gpmi-nand", + .pm = &gpmi_pm_ops, .of_match_table = gpmi_nand_id_table, }, .probe = gpmi_nand_probe, |