1 files changed, 550 insertions, 53 deletions

diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index 0addbad15832..7b0c72ae02a0 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -24,19 +24,52 @@
 #include "drm_fb_cma_helper.h"
 #include "drm_plane_helper.h"
 
+enum vc4_scaling_mode {
+	VC4_SCALING_NONE,
+	VC4_SCALING_TPZ,
+	VC4_SCALING_PPF,
+};
+
 struct vc4_plane_state {
 	struct drm_plane_state base;
+	/* System memory copy of the display list for this element, computed
+	 * at atomic_check time.
+	 */
 	u32 *dlist;
-	u32 dlist_size; /* Number of dwords in allocated for the display list */
+	u32 dlist_size; /* Number of dwords allocated for the display list */
 	u32 dlist_count; /* Number of used dwords in the display list. */
 
-	/* Offset in the dlist to pointer word 0. */
-	u32 pw0_offset;
+	/* Offset in the dlist to various words, for pageflip or
+	 * cursor updates.
+	 */
+	u32 pos0_offset;
+	u32 pos2_offset;
+	u32 ptr0_offset;
 
 	/* Offset where the plane's dlist was last stored in the
-	   hardware at vc4_crtc_atomic_flush() time.
-	*/
-	u32 *hw_dlist;
+	 * hardware at vc4_crtc_atomic_flush() time.
+	 */
+	u32 __iomem *hw_dlist;
+
+	/* Clipped coordinates of the plane on the display. */
+	int crtc_x, crtc_y, crtc_w, crtc_h;
+	/* Clipped area being scanned from in the FB. */
+	u32 src_x, src_y;
+
+	u32 src_w[2], src_h[2];
+
+	/* Scaling selection for the RGB/Y plane and the Cb/Cr planes. */
+	enum vc4_scaling_mode x_scaling[2], y_scaling[2];
+	bool is_unity;
+	bool is_yuv;
+
+	/* Offset to start scanning out from the start of the plane's
+	 * BO.
+	 */
+	u32 offsets[3];
+
+	/* Our allocation in LBM for temporary storage during scaling. */
+	struct drm_mm_node lbm;
 };
 
 static inline struct vc4_plane_state *
@@ -50,6 +83,7 @@ static const struct hvs_format {
 	u32 hvs; /* HVS_FORMAT_* */
 	u32 pixel_order;
 	bool has_alpha;
+	bool flip_cbcr;
 } hvs_formats[] = {
 	{
 		.drm = DRM_FORMAT_XRGB8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
@@ -59,6 +93,48 @@ static const struct hvs_format {
 		.drm = DRM_FORMAT_ARGB8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
 		.pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = true,
 	},
+	{
+		.drm = DRM_FORMAT_RGB565, .hvs = HVS_PIXEL_FORMAT_RGB565,
+		.pixel_order = HVS_PIXEL_ORDER_XRGB, .has_alpha = false,
+	},
+	{
+		.drm = DRM_FORMAT_BGR565, .hvs = HVS_PIXEL_FORMAT_RGB565,
+		.pixel_order = HVS_PIXEL_ORDER_XBGR, .has_alpha = false,
+	},
+	{
+		.drm = DRM_FORMAT_ARGB1555, .hvs = HVS_PIXEL_FORMAT_RGBA5551,
+		.pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = true,
+	},
+	{
+		.drm = DRM_FORMAT_XRGB1555, .hvs = HVS_PIXEL_FORMAT_RGBA5551,
+		.pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = false,
+	},
+	{
+		.drm = DRM_FORMAT_YUV422,
+		.hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE,
+	},
+	{
+		.drm = DRM_FORMAT_YVU422,
+		.hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE,
+		.flip_cbcr = true,
+	},
+	{
+		.drm = DRM_FORMAT_YUV420,
+		.hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE,
+	},
+	{
+		.drm = DRM_FORMAT_YVU420,
+		.hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE,
+		.flip_cbcr = true,
+	},
+	{
+		.drm = DRM_FORMAT_NV12,
+		.hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_2PLANE,
+	},
+	{
+		.drm = DRM_FORMAT_NV16,
+		.hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_2PLANE,
+	},
 };
 
 static const struct hvs_format *vc4_get_hvs_format(u32 drm_format)
@@ -73,6 +149,16 @@ static const struct hvs_format *vc4_get_hvs_format(u32 drm_format)
 	return NULL;
 }
 
+static enum vc4_scaling_mode vc4_get_scaling_mode(u32 src, u32 dst)
+{
+	if (dst > src)
+		return VC4_SCALING_PPF;
+	else if (dst < src)
+		return VC4_SCALING_TPZ;
+	else
+		return VC4_SCALING_NONE;
+}
+
 static bool plane_enabled(struct drm_plane_state *state)
 {
 	return state->fb && state->crtc;
@@ -89,6 +175,8 @@ static struct drm_plane_state *vc4_plane_duplicate_state(struct drm_plane *plane
 	if (!vc4_state)
 		return NULL;
 
+	memset(&vc4_state->lbm, 0, sizeof(vc4_state->lbm));
+
 	__drm_atomic_helper_plane_duplicate_state(plane, &vc4_state->base);
 
 	if (vc4_state->dlist) {
@@ -108,8 +196,17 @@ static struct drm_plane_state *vc4_plane_duplicate_state(struct drm_plane *plane
 static void vc4_plane_destroy_state(struct drm_plane *plane,
 				    struct drm_plane_state *state)
 {
+	struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
 	struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 
+	if (vc4_state->lbm.allocated) {
+		unsigned long irqflags;
+
+		spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
+		drm_mm_remove_node(&vc4_state->lbm);
+		spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
+	}
+
 	kfree(vc4_state->dlist);
 	__drm_atomic_helper_plane_destroy_state(plane, &vc4_state->base);
 	kfree(state);
@@ -148,84 +245,400 @@ static void vc4_dlist_write(struct vc4_plane_state *vc4_state, u32 val)
 	vc4_state->dlist[vc4_state->dlist_count++] = val;
 }
 
+/* Returns the scl0/scl1 field based on whether the dimensions need to
+ * be up/down/non-scaled.
+ *
+ * This is a replication of a table from the spec.
+ */
+static u32 vc4_get_scl_field(struct drm_plane_state *state, int plane)
+{
+	struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+
+	switch (vc4_state->x_scaling[plane] << 2 | vc4_state->y_scaling[plane]) {
+	case VC4_SCALING_PPF << 2 | VC4_SCALING_PPF:
+		return SCALER_CTL0_SCL_H_PPF_V_PPF;
+	case VC4_SCALING_TPZ << 2 | VC4_SCALING_PPF:
+		return SCALER_CTL0_SCL_H_TPZ_V_PPF;
+	case VC4_SCALING_PPF << 2 | VC4_SCALING_TPZ:
+		return SCALER_CTL0_SCL_H_PPF_V_TPZ;
+	case VC4_SCALING_TPZ << 2 | VC4_SCALING_TPZ:
+		return SCALER_CTL0_SCL_H_TPZ_V_TPZ;
+	case VC4_SCALING_PPF << 2 | VC4_SCALING_NONE:
+		return SCALER_CTL0_SCL_H_PPF_V_NONE;
+	case VC4_SCALING_NONE << 2 | VC4_SCALING_PPF:
+		return SCALER_CTL0_SCL_H_NONE_V_PPF;
+	case VC4_SCALING_NONE << 2 | VC4_SCALING_TPZ:
+		return SCALER_CTL0_SCL_H_NONE_V_TPZ;
+	case VC4_SCALING_TPZ << 2 | VC4_SCALING_NONE:
+		return SCALER_CTL0_SCL_H_TPZ_V_NONE;
+	default:
+	case VC4_SCALING_NONE << 2 | VC4_SCALING_NONE:
+		/* The unity case is independently handled by
+		 * SCALER_CTL0_UNITY.
+		 */
+		return 0;
+	}
+}
+
+static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
+{
+	struct drm_plane *plane = state->plane;
+	struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+	struct drm_framebuffer *fb = state->fb;
+	struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
+	u32 subpixel_src_mask = (1 << 16) - 1;
+	u32 format = fb->pixel_format;
+	int num_planes = drm_format_num_planes(format);
+	u32 h_subsample = 1;
+	u32 v_subsample = 1;
+	int i;
+
+	for (i = 0; i < num_planes; i++)
+		vc4_state->offsets[i] = bo->paddr + fb->offsets[i];
+
+	/* We don't support subpixel source positioning for scaling. */
+	if ((state->src_x & subpixel_src_mask) ||
+	    (state->src_y & subpixel_src_mask) ||
+	    (state->src_w & subpixel_src_mask) ||
+	    (state->src_h & subpixel_src_mask)) {
+		return -EINVAL;
+	}
+
+	vc4_state->src_x = state->src_x >> 16;
+	vc4_state->src_y = state->src_y >> 16;
+	vc4_state->src_w[0] = state->src_w >> 16;
+	vc4_state->src_h[0] = state->src_h >> 16;
+
+	vc4_state->crtc_x = state->crtc_x;
+	vc4_state->crtc_y = state->crtc_y;
+	vc4_state->crtc_w = state->crtc_w;
+	vc4_state->crtc_h = state->crtc_h;
+
+	vc4_state->x_scaling[0] = vc4_get_scaling_mode(vc4_state->src_w[0],
+						       vc4_state->crtc_w);
+	vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0],
+						       vc4_state->crtc_h);
+
+	if (num_planes > 1) {
+		vc4_state->is_yuv = true;
+
+		h_subsample = drm_format_horz_chroma_subsampling(format);
+		v_subsample = drm_format_vert_chroma_subsampling(format);
+		vc4_state->src_w[1] = vc4_state->src_w[0] / h_subsample;
+		vc4_state->src_h[1] = vc4_state->src_h[0] / v_subsample;
+
+		vc4_state->x_scaling[1] =
+			vc4_get_scaling_mode(vc4_state->src_w[1],
+					     vc4_state->crtc_w);
+		vc4_state->y_scaling[1] =
+			vc4_get_scaling_mode(vc4_state->src_h[1],
+					     vc4_state->crtc_h);
+
+		/* YUV conversion requires that scaling be enabled,
+		 * even on a plane that's otherwise 1:1.  Choose TPZ
+		 * for simplicity.
+		 */
+		if (vc4_state->x_scaling[0] == VC4_SCALING_NONE)
+			vc4_state->x_scaling[0] = VC4_SCALING_TPZ;
+		if (vc4_state->y_scaling[0] == VC4_SCALING_NONE)
+			vc4_state->y_scaling[0] = VC4_SCALING_TPZ;
+	}
+
+	vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE &&
+			       vc4_state->y_scaling[0] == VC4_SCALING_NONE &&
+			       vc4_state->x_scaling[1] == VC4_SCALING_NONE &&
+			       vc4_state->y_scaling[1] == VC4_SCALING_NONE);
+
+	/* No configuring scaling on the cursor plane, since it gets
+	   non-vblank-synced updates, and scaling requires requires
+	   LBM changes which have to be vblank-synced.
+	 */
+	if (plane->type == DRM_PLANE_TYPE_CURSOR && !vc4_state->is_unity)
+		return -EINVAL;
+
+	/* Clamp the on-screen start x/y to 0.  The hardware doesn't
+	 * support negative y, and negative x wastes bandwidth.
+	 */
+	if (vc4_state->crtc_x < 0) {
+		for (i = 0; i < num_planes; i++) {
+			u32 cpp = drm_format_plane_cpp(fb->pixel_format, i);
+			u32 subs = ((i == 0) ? 1 : h_subsample);
+
+			vc4_state->offsets[i] += (cpp *
+						  (-vc4_state->crtc_x) / subs);
+		}
+		vc4_state->src_w[0] += vc4_state->crtc_x;
+		vc4_state->src_w[1] += vc4_state->crtc_x / h_subsample;
+		vc4_state->crtc_x = 0;
+	}
+
+	if (vc4_state->crtc_y < 0) {
+		for (i = 0; i < num_planes; i++) {
+			u32 subs = ((i == 0) ? 1 : v_subsample);
+
+			vc4_state->offsets[i] += (fb->pitches[i] *
+						  (-vc4_state->crtc_y) / subs);
+		}
+		vc4_state->src_h[0] += vc4_state->crtc_y;
+		vc4_state->src_h[1] += vc4_state->crtc_y / v_subsample;
+		vc4_state->crtc_y = 0;
+	}
+
+	return 0;
+}
+
+static void vc4_write_tpz(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
+{
+	u32 scale, recip;
+
+	scale = (1 << 16) * src / dst;
+
+	/* The specs note that while the reciprocal would be defined
+	 * as (1<<32)/scale, ~0 is close enough.
+	 */
+	recip = ~0 / scale;
+
+	vc4_dlist_write(vc4_state,
+			VC4_SET_FIELD(scale, SCALER_TPZ0_SCALE) |
+			VC4_SET_FIELD(0, SCALER_TPZ0_IPHASE));
+	vc4_dlist_write(vc4_state,
+			VC4_SET_FIELD(recip, SCALER_TPZ1_RECIP));
+}
+
+static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
+{
+	u32 scale = (1 << 16) * src / dst;
+
+	vc4_dlist_write(vc4_state,
+			SCALER_PPF_AGC |
+			VC4_SET_FIELD(scale, SCALER_PPF_SCALE) |
+			VC4_SET_FIELD(0, SCALER_PPF_IPHASE));
+}
+
+static u32 vc4_lbm_size(struct drm_plane_state *state)
+{
+	struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+	/* This is the worst case number.  One of the two sizes will
+	 * be used depending on the scaling configuration.
+	 */
+	u32 pix_per_line = max(vc4_state->src_w[0], (u32)vc4_state->crtc_w);
+	u32 lbm;
+
+	if (!vc4_state->is_yuv) {
+		if (vc4_state->is_unity)
+			return 0;
+		else if (vc4_state->y_scaling[0] == VC4_SCALING_TPZ)
+			lbm = pix_per_line * 8;
+		else {
+			/* In special cases, this multiplier might be 12. */
+			lbm = pix_per_line * 16;
+		}
+	} else {
+		/* There are cases for this going down to a multiplier
+		 * of 2, but according to the firmware source, the
+		 * table in the docs is somewhat wrong.
+		 */
+		lbm = pix_per_line * 16;
+	}
+
+	lbm = roundup(lbm, 32);
+
+	return lbm;
+}
+
+static void vc4_write_scaling_parameters(struct drm_plane_state *state,
+					 int channel)
+{
+	struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+
+	/* Ch0 H-PPF Word 0: Scaling Parameters */
+	if (vc4_state->x_scaling[channel] == VC4_SCALING_PPF) {
+		vc4_write_ppf(vc4_state,
+			      vc4_state->src_w[channel], vc4_state->crtc_w);
+	}
+
+	/* Ch0 V-PPF Words 0-1: Scaling Parameters, Context */
+	if (vc4_state->y_scaling[channel] == VC4_SCALING_PPF) {
+		vc4_write_ppf(vc4_state,
+			      vc4_state->src_h[channel], vc4_state->crtc_h);
+		vc4_dlist_write(vc4_state, 0xc0c0c0c0);
+	}
+
+	/* Ch0 H-TPZ Words 0-1: Scaling Parameters, Recip */
+	if (vc4_state->x_scaling[channel] == VC4_SCALING_TPZ) {
+		vc4_write_tpz(vc4_state,
+			      vc4_state->src_w[channel], vc4_state->crtc_w);
+	}
+
+	/* Ch0 V-TPZ Words 0-2: Scaling Parameters, Recip, Context */
+	if (vc4_state->y_scaling[channel] == VC4_SCALING_TPZ) {
+		vc4_write_tpz(vc4_state,
+			      vc4_state->src_h[channel], vc4_state->crtc_h);
+		vc4_dlist_write(vc4_state, 0xc0c0c0c0);
+	}
+}
+
 /* Writes out a full display list for an active plane to the plane's
  * private dlist state.
  */
 static int vc4_plane_mode_set(struct drm_plane *plane,
 			      struct drm_plane_state *state)
 {
+	struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
 	struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 	struct drm_framebuffer *fb = state->fb;
-	struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
 	u32 ctl0_offset = vc4_state->dlist_count;
 	const struct hvs_format *format = vc4_get_hvs_format(fb->pixel_format);
-	uint32_t offset = fb->offsets[0];
-	int crtc_x = state->crtc_x;
-	int crtc_y = state->crtc_y;
-	int crtc_w = state->crtc_w;
-	int crtc_h = state->crtc_h;
-
-	if (state->crtc_w << 16 != state->src_w ||
-	    state->crtc_h << 16 != state->src_h) {
-		/* We don't support scaling yet, which involves
-		 * allocating the LBM memory for scaling temporary
-		 * storage, and putting filter kernels in the HVS
-		 * context.
-		 */
-		return -EINVAL;
+	int num_planes = drm_format_num_planes(format->drm);
+	u32 scl0, scl1;
+	u32 lbm_size;
+	unsigned long irqflags;
+	int ret, i;
+
+	ret = vc4_plane_setup_clipping_and_scaling(state);
+	if (ret)
+		return ret;
+
+	/* Allocate the LBM memory that the HVS will use for temporary
+	 * storage due to our scaling/format conversion.
+	 */
+	lbm_size = vc4_lbm_size(state);
+	if (lbm_size) {
+		if (!vc4_state->lbm.allocated) {
+			spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
+			ret = drm_mm_insert_node(&vc4->hvs->lbm_mm,
+						 &vc4_state->lbm,
+						 lbm_size, 32, 0);
+			spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
+		} else {
+			WARN_ON_ONCE(lbm_size != vc4_state->lbm.size);
+		}
 	}
 
-	if (crtc_x < 0) {
-		offset += drm_format_plane_cpp(fb->pixel_format, 0) * -crtc_x;
-		crtc_w += crtc_x;
-		crtc_x = 0;
-	}
+	if (ret)
+		return ret;
 
-	if (crtc_y < 0) {
-		offset += fb->pitches[0] * -crtc_y;
-		crtc_h += crtc_y;
-		crtc_y = 0;
+	/* SCL1 is used for Cb/Cr scaling of planar formats.  For RGB
+	 * and 4:4:4, scl1 should be set to scl0 so both channels of
+	 * the scaler do the same thing.  For YUV, the Y plane needs
+	 * to be put in channel 1 and Cb/Cr in channel 0, so we swap
+	 * the scl fields here.
+	 */
+	if (num_planes == 1) {
+		scl0 = vc4_get_scl_field(state, 1);
+		scl1 = scl0;
+	} else {
+		scl0 = vc4_get_scl_field(state, 1);
+		scl1 = vc4_get_scl_field(state, 0);
 	}
 
+	/* Control word */
 	vc4_dlist_write(vc4_state,
 			SCALER_CTL0_VALID |
 			(format->pixel_order << SCALER_CTL0_ORDER_SHIFT) |
 			(format->hvs << SCALER_CTL0_PIXEL_FORMAT_SHIFT) |
-			SCALER_CTL0_UNITY);
+			(vc4_state->is_unity ? SCALER_CTL0_UNITY : 0) |
+			VC4_SET_FIELD(scl0, SCALER_CTL0_SCL0) |
+			VC4_SET_FIELD(scl1, SCALER_CTL0_SCL1));
 
 	/* Position Word 0: Image Positions and Alpha Value */
+	vc4_state->pos0_offset = vc4_state->dlist_count;
 	vc4_dlist_write(vc4_state,
 			VC4_SET_FIELD(0xff, SCALER_POS0_FIXED_ALPHA) |
-			VC4_SET_FIELD(crtc_x, SCALER_POS0_START_X) |
-			VC4_SET_FIELD(crtc_y, SCALER_POS0_START_Y));
-
-	/* Position Word 1: Scaled Image Dimensions.
-	 * Skipped due to SCALER_CTL0_UNITY scaling.
-	 */
+			VC4_SET_FIELD(vc4_state->crtc_x, SCALER_POS0_START_X) |
+			VC4_SET_FIELD(vc4_state->crtc_y, SCALER_POS0_START_Y));
+
+	/* Position Word 1: Scaled Image Dimensions. */
+	if (!vc4_state->is_unity) {
+		vc4_dlist_write(vc4_state,
+				VC4_SET_FIELD(vc4_state->crtc_w,
+					      SCALER_POS1_SCL_WIDTH) |
+				VC4_SET_FIELD(vc4_state->crtc_h,
+					      SCALER_POS1_SCL_HEIGHT));
+	}
 
 	/* Position Word 2: Source Image Size, Alpha Mode */
+	vc4_state->pos2_offset = vc4_state->dlist_count;
 	vc4_dlist_write(vc4_state,
 			VC4_SET_FIELD(format->has_alpha ?
 				      SCALER_POS2_ALPHA_MODE_PIPELINE :
 				      SCALER_POS2_ALPHA_MODE_FIXED,
 				      SCALER_POS2_ALPHA_MODE) |
-			VC4_SET_FIELD(crtc_w, SCALER_POS2_WIDTH) |
-			VC4_SET_FIELD(crtc_h, SCALER_POS2_HEIGHT));
+			VC4_SET_FIELD(vc4_state->src_w[0], SCALER_POS2_WIDTH) |
+			VC4_SET_FIELD(vc4_state->src_h[0], SCALER_POS2_HEIGHT));
 
 	/* Position Word 3: Context.  Written by the HVS. */
 	vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 
-	vc4_state->pw0_offset = vc4_state->dlist_count;
 
-	/* Pointer Word 0: RGB / Y Pointer */
-	vc4_dlist_write(vc4_state, bo->paddr + offset);
+	/* Pointer Word 0/1/2: RGB / Y / Cb / Cr Pointers
+	 *
+	 * The pointers may be any byte address.
+	 */
+	vc4_state->ptr0_offset = vc4_state->dlist_count;
+	if (!format->flip_cbcr) {
+		for (i = 0; i < num_planes; i++)
+			vc4_dlist_write(vc4_state, vc4_state->offsets[i]);
+	} else {
+		WARN_ON_ONCE(num_planes != 3);
+		vc4_dlist_write(vc4_state, vc4_state->offsets[0]);
+		vc4_dlist_write(vc4_state, vc4_state->offsets[2]);
+		vc4_dlist_write(vc4_state, vc4_state->offsets[1]);
+	}
 
-	/* Pointer Context Word 0: Written by the HVS */
-	vc4_dlist_write(vc4_state, 0xc0c0c0c0);
+	/* Pointer Context Word 0/1/2: Written by the HVS */
+	for (i = 0; i < num_planes; i++)
+		vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 
-	/* Pitch word 0: Pointer 0 Pitch */
-	vc4_dlist_write(vc4_state,
-			VC4_SET_FIELD(fb->pitches[0], SCALER_SRC_PITCH));
+	/* Pitch word 0/1/2 */
+	for (i = 0; i < num_planes; i++) {
+		vc4_dlist_write(vc4_state,
+				VC4_SET_FIELD(fb->pitches[i], SCALER_SRC_PITCH));
+	}
+
+	/* Colorspace conversion words */
+	if (vc4_state->is_yuv) {
+		vc4_dlist_write(vc4_state, SCALER_CSC0_ITR_R_601_5);
+		vc4_dlist_write(vc4_state, SCALER_CSC1_ITR_R_601_5);
+		vc4_dlist_write(vc4_state, SCALER_CSC2_ITR_R_601_5);
+	}
+
+	if (!vc4_state->is_unity) {
+		/* LBM Base Address. */
+		if (vc4_state->y_scaling[0] != VC4_SCALING_NONE ||
+		    vc4_state->y_scaling[1] != VC4_SCALING_NONE) {
+			vc4_dlist_write(vc4_state, vc4_state->lbm.start);
+		}
+
+		if (num_planes > 1) {
+			/* Emit Cb/Cr as channel 0 and Y as channel
+			 * 1. This matches how we set up scl0/scl1
+			 * above.
+			 */
+			vc4_write_scaling_parameters(state, 1);
+		}
+		vc4_write_scaling_parameters(state, 0);
+
+		/* If any PPF setup was done, then all the kernel
+		 * pointers get uploaded.
+		 */
+		if (vc4_state->x_scaling[0] == VC4_SCALING_PPF ||
+		    vc4_state->y_scaling[0] == VC4_SCALING_PPF ||
+		    vc4_state->x_scaling[1] == VC4_SCALING_PPF ||
+		    vc4_state->y_scaling[1] == VC4_SCALING_PPF) {
+			u32 kernel = VC4_SET_FIELD(vc4->hvs->mitchell_netravali_filter.start,
+						   SCALER_PPF_KERNEL_OFFSET);
+
+			/* HPPF plane 0 */
+			vc4_dlist_write(vc4_state, kernel);
+			/* VPPF plane 0 */
+			vc4_dlist_write(vc4_state, kernel);
+			/* HPPF plane 1 */
+			vc4_dlist_write(vc4_state, kernel);
+			/* VPPF plane 1 */
+			vc4_dlist_write(vc4_state, kernel);
+		}
+	}
 
 	vc4_state->dlist[ctl0_offset] |=
 		VC4_SET_FIELD(vc4_state->dlist_count, SCALER_CTL0_SIZE);
@@ -303,13 +716,13 @@ void vc4_plane_async_set_fb(struct drm_plane *plane, struct drm_framebuffer *fb)
 	 * scanout will start from this address as soon as the FIFO
 	 * needs to refill with pixels.
 	 */
-	writel(addr, &vc4_state->hw_dlist[vc4_state->pw0_offset]);
+	writel(addr, &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
 
 	/* Also update the CPU-side dlist copy, so that any later
 	 * atomic updates that don't do a new modeset on our plane
 	 * also use our updated address.
 	 */
-	vc4_state->dlist[vc4_state->pw0_offset] = addr;
+	vc4_state->dlist[vc4_state->ptr0_offset] = addr;
 }
 
 static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
@@ -325,8 +738,83 @@ static void vc4_plane_destroy(struct drm_plane *plane)
 	drm_plane_cleanup(plane);
 }
 
+/* Implements immediate (non-vblank-synced) updates of the cursor
+ * position, or falls back to the atomic helper otherwise.
+ */
+static int
+vc4_update_plane(struct drm_plane *plane,
+		 struct drm_crtc *crtc,
+		 struct drm_framebuffer *fb,
+		 int crtc_x, int crtc_y,
+		 unsigned int crtc_w, unsigned int crtc_h,
+		 uint32_t src_x, uint32_t src_y,
+		 uint32_t src_w, uint32_t src_h)
+{
+	struct drm_plane_state *plane_state;
+	struct vc4_plane_state *vc4_state;
+
+	if (plane != crtc->cursor)
+		goto out;
+
+	plane_state = plane->state;
+	vc4_state = to_vc4_plane_state(plane_state);
+
+	if (!plane_state)
+		goto out;
+
+	/* If we're changing the cursor contents, do that in the
+	 * normal vblank-synced atomic path.
+	 */
+	if (fb != plane_state->fb)
+		goto out;
+
+	/* No configuring new scaling in the fast path. */
+	if (crtc_w != plane_state->crtc_w ||
+	    crtc_h != plane_state->crtc_h ||
+	    src_w != plane_state->src_w ||
+	    src_h != plane_state->src_h) {
+		goto out;
+	}
+
+	/* Set the cursor's position on the screen.  This is the
+	 * expected change from the drm_mode_cursor_universal()
+	 * helper.
+	 */
+	plane_state->crtc_x = crtc_x;
+	plane_state->crtc_y = crtc_y;
+
+	/* Allow changing the start position within the cursor BO, if
+	 * that matters.
+	 */
+	plane_state->src_x = src_x;
+	plane_state->src_y = src_y;
+
+	/* Update the display list based on the new crtc_x/y. */
+	vc4_plane_atomic_check(plane, plane_state);
+
+	/* Note that we can't just call vc4_plane_write_dlist()
+	 * because that would smash the context data that the HVS is
+	 * currently using.
+	 */
+	writel(vc4_state->dlist[vc4_state->pos0_offset],
+	       &vc4_state->hw_dlist[vc4_state->pos0_offset]);
+	writel(vc4_state->dlist[vc4_state->pos2_offset],
+	       &vc4_state->hw_dlist[vc4_state->pos2_offset]);
+	writel(vc4_state->dlist[vc4_state->ptr0_offset],
+	       &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
+
+	return 0;
+
+out:
+	return drm_atomic_helper_update_plane(plane, crtc, fb,
+					      crtc_x, crtc_y,
+					      crtc_w, crtc_h,
+					      src_x, src_y,
+					      src_w, src_h);
+}
+
 static const struct drm_plane_funcs vc4_plane_funcs = {
-	.update_plane = drm_atomic_helper_update_plane,
+	.update_plane = vc4_update_plane,
 	.disable_plane = drm_atomic_helper_disable_plane,
 	.destroy = vc4_plane_destroy,
 	.set_property = NULL,
@@ -341,6 +829,7 @@ struct drm_plane *vc4_plane_init(struct drm_device *dev,
 	struct drm_plane *plane = NULL;
 	struct vc4_plane *vc4_plane;
 	u32 formats[ARRAY_SIZE(hvs_formats)];
+	u32 num_formats = 0;
 	int ret = 0;
 	unsigned i;
 
@@ -351,12 +840,20 @@ struct drm_plane *vc4_plane_init(struct drm_device *dev,
 		goto fail;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(hvs_formats); i++)
-		formats[i] = hvs_formats[i].drm;
+	for (i = 0; i < ARRAY_SIZE(hvs_formats); i++) {
+		/* Don't allow YUV in cursor planes, since that means
+		 * tuning on the scaler, which we don't allow for the
+		 * cursor.
+		 */
+		if (type != DRM_PLANE_TYPE_CURSOR ||
+		    hvs_formats[i].hvs < HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE) {
+			formats[num_formats++] = hvs_formats[i].drm;
+		}
+	}
 	plane = &vc4_plane->base;
 	ret = drm_universal_plane_init(dev, plane, 0xff,
 				       &vc4_plane_funcs,
-				       formats, ARRAY_SIZE(formats),
+				       formats, num_formats,
 				       type, NULL);
 
 	drm_plane_helper_add(plane, &vc4_plane_helper_funcs);