diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/sama5d3.dtsi | 6 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sama5d3xmb.dtsi | 31 |
2 files changed, 35 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index bd3b43558ddb..261311bdf65b 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -219,9 +219,15 @@ compatible = "atmel,at91sam9g45-isi"; reg = <0xf0034000 0x4000>; interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi_data_0_7>; clocks = <&isi_clk>; clock-names = "isi_clk"; status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; }; sfr: sfr@f0038000 { diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index d9464fce4c0e..9fdb8a07b145 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -52,6 +52,29 @@ }; }; + i2c1: i2c@f0018000 { + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + /* use pck1 for the master clock of ov2640 */ + clocks = <&pck1>; + clock-names = "xvclk"; + assigned-clocks = <&pck1>; + assigned-clock-rates = <25000000>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + }; + usart1: serial@f0020000 { dmas = <0>, <0>; /* Do not use DMA for usart1 */ pinctrl-names = "default"; @@ -60,8 +83,12 @@ }; isi: isi@f0034000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_isi_data_0_7>; + port { + isi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + }; + }; }; mmc1: mmc@f8000000 { |