diff options
Diffstat (limited to 'arch/arm/boot/dts')
78 files changed, 4894 insertions, 1397 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 59b6d3e5aaf0..dde363b64f23 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -54,6 +54,10 @@ dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ + bcm911360_entphn.dtb \ + bcm911360k.dtb \ + bcm958300k.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ @@ -81,6 +85,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5250-spring.dtb \ exynos5260-xyref5260.dtb \ exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ @@ -274,7 +279,8 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ imx28-tx28.dtb -dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb +dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb \ + ste-nomadik-nhk15.dtb dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \ nspire-tp.dtb \ nspire-clp.dtb @@ -363,6 +369,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-sony-xperia-honami.dtb +dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-bqcurie2.dtb \ rk3188-radxarock.dtb \ diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts new file mode 100644 index 000000000000..ff26c7ed8c41 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -0,0 +1,412 @@ +/* + * Copyright 2014 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "skeleton.dtsi" + +/ { + model = "ARM RealView PB1176"; + compatible = "arm,realview-pb1176"; + + chosen { }; + + aliases { + serial0 = &pb1176_serial0; + serial1 = &pb1176_serial1; + serial2 = &pb1176_serial2; + serial3 = &pb1176_serial3; + serial4 = &fpga_serial; + }; + + memory { + /* 128 MiB memory @ 0x0 */ + reg = <0x00000000 0x08000000>; + }; + + /* The voltage to the MMC card is hardwired at 3.3V */ + vmmc: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + mclk: mclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + kmiclk: kmiclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + sspclk: sspclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + uartclk: uartclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + /* FIXME: this actually hangs off the PLL clocks */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,realview-pb1176-soc", "simple-bus"; + regmap = <&syscon>; + ranges; + + syscon: syscon@10000000 { + compatible = "arm,realview-pb1176-syscon", "syscon"; + reg = <0x10000000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "versatile:3"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "versatile:4"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "versatile:5"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "versatile:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "versatile:7"; + default-state = "off"; + }; + }; + + /* Primary DevChip GIC synthesized with the CPU */ + intc_dc1176: interrupt-controller@10120000 { + compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x10121000 0x1000>, + <0x10120000 0x100>; + }; + + L2: l2-cache { + compatible = "arm,l220-cache"; + reg = <0x10110000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + /* + * Override default cache size, sets and + * associativity as these may be erroneously set + * up by boot loader(s). + */ + arm,override-auxreg; + cache-size = <131072>; // 128kB + cache-sets = <512>; + cache-line-size = <32>; + }; + + pmu { + compatible = "arm,arm1176-pmu"; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer01: timer@10104000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10104000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer23: timer@10105000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10105000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + arm,sp804-has-irq = <1>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + pb1176_rtc: rtc@10108000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10108000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + pb1176_gpio0: gpio@1010a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x1010a000 0x1000>; + gpio-controller; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + pb1176_ssp: ssp@1010b000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x1010b000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sspclk>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; + }; + + pb1176_serial0: serial@1010c000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1010c000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + pb1176_serial1: serial@1010d000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1010d000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + pb1176_serial2: serial@1010e000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1010e000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + pb1176_serial3: serial@1010f000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1010f000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + }; + + /* These peripherals are inside the FPGA rather than the DevChip */ + fpga { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + fpga_mci: mmcsd@10005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x10005000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>; + /* Due to frequent FIFO overruns, use just 500 kHz */ + max-frequency = <500000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + clocks = <&mclk>, <&pclk>; + clock-names = "mclk", "apb_pclk"; + vmmc-supply = <&vmmc>; + cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>; + }; + + fpga_kmi0: kmi@10006000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10006000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + fpga_kmi1: kmi@10007000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10007000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + fpga_charlcd: charlcd@10008000 { + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + fpga_serial: serial@10009000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x10009000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + /* This GIC on the board is cascaded off the DevChip GIC */ + intc_fpga1176: interrupt-controller@10040000 { + compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x10041000 0x1000>, + <0x10040000 0x100>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + }; + + fpga_gpio0: gpio@10014000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10014000 0x1000>; + gpio-controller; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + fpga_gpio1: gpio@10015000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10015000 0x1000>; + gpio-controller; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + fpga_rtc: rtc@10017000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10017000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + + }; +}; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index d68b3c4862bc..653e4395b7cb 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -122,9 +122,10 @@ interrupts-extended = <&pmc AT91_PMC_LOCKB>; clocks = <&main>; reg = <1>; - atmel,clk-input-range = <1000000 5000000>; + atmel,clk-input-range = <1000000 32000000>; #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; + atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, + <190000000 240000000 2 1>; }; mck: masterck { @@ -676,6 +677,14 @@ }; }; + can { + pinctrl_can_rx_tx: can_rx_tx { + atmel,pins = + <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* CANRX, conflicts with IRQ0 */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* CANTX, conflicts with PCK0 */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -904,6 +913,17 @@ clock-names = "pwm_clk"; status = "disabled"; }; + + can: can@fffac000 { + compatible = "atmel,at91sam9263-can"; + reg = <0xfffac000 0x300>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_rx_tx>; + clocks = <&can_clk>; + clock-names = "can_clk"; + status = "disabled"; + }; }; fb0: fb@0x00700000 { diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index c2554219f7a4..3c5fa3388997 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -10,6 +10,7 @@ #include "at91sam9x5_usart3.dtsi" #include "at91sam9x5_macb0.dtsi" #include "at91sam9x5_macb1.dtsi" +#include "at91sam9x5_can.dtsi" / { model = "Atmel AT91SAM9X25 SoC"; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index 8eac66ce0ab7..499cdc81f4c0 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -8,6 +8,7 @@ #include "at91sam9x5.dtsi" #include "at91sam9x5_macb0.dtsi" +#include "at91sam9x5_can.dtsi" / { model = "Atmel AT91SAM9X35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 726274f7959b..bbb3ba65165f 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -860,6 +860,9 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>, + <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; clocks = <&mck>; clock-names = "usart"; status = "disabled"; @@ -871,6 +874,9 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; clocks = <&usart0_clk>; clock-names = "usart"; status = "disabled"; @@ -882,6 +888,9 @@ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>, + <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; clocks = <&usart1_clk>; clock-names = "usart"; status = "disabled"; @@ -893,6 +902,9 @@ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>, + <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; clocks = <&usart2_clk>; clock-names = "usart"; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi index f44ab7702a12..8eb2f9c1b978 100644 --- a/arch/arm/boot/dts/at91sam9x5_can.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi @@ -1,5 +1,5 @@ /* - * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 + * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 * Ethernet interface. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> @@ -20,10 +20,50 @@ reg = <29>; }; - can1_clk: can1_clk { - #clock-cells = <0>; - reg = <30>; - }; + can1_clk: can1_clk { + #clock-cells = <0>; + reg = <30>; + }; + }; + }; + + can0: can@f8000000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf8000000 0x300>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_rx_tx>; + clocks = <&can0_clk>; + clock-names = "can_clk"; + status = "disabled"; + }; + + can1: can@f8004000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf8004000 0x300>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_rx_tx>; + clocks = <&can1_clk>; + clock-names = "can_clk"; + status = "disabled"; + }; + + pinctrl@fffff400 { + can0 { + pinctrl_can0_rx_tx: can0_rx_tx { + atmel,pins = + <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX0, conflicts with DRXD */ + AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* CANTX0, conflicts with DTXD */ + }; + }; + + can1 { + pinctrl_can1_rx_tx: can1_rx_tx { + atmel,pins = + <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX1, conflicts with RXD1 */ + AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* CANTX1, conflicts with TXD1 */ + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 140217a54384..43bb5b51caa6 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -57,6 +57,9 @@ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>, + <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; clocks = <&usart3_clk>; clock-names = "usart"; status = "disabled"; diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi new file mode 100644 index 000000000000..d06172bfd99d --- /dev/null +++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi @@ -0,0 +1,73 @@ +/* + * Copyright 2014 Broadcom Corporation. All rights reserved. + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <25000000>; + }; + + apb_clk: apb_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + }; + + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + + sdio_clk: lcpll_ch2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + axi81_clk: axi81_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + keypad_clk: keypad_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <31806>; + }; + + adc_clk: adc_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1562500>; + }; + + pwm_clk: pwm_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + + lcd_clk: mipipll_ch1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi new file mode 100644 index 000000000000..9c650aba372d --- /dev/null +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -0,0 +1,100 @@ +/* + * Copyright 2014 Broadcom Corporation. All rights reserved. + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +#include "skeleton.dtsi" + +/ { + compatible = "brcm,cygnus"; + model = "Broadcom Cygnus SoC"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; + + /include/ "bcm-cygnus-clock.dtsi" + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus", "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + wdt@18009000 { + compatible = "arm,sp805" , "arm,primecell"; + reg = <0x18009000 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; + }; + }; + + uart3: serial@18023000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18023000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <100000000>; + clocks = <&axi81_clk>; + status = "okay"; + }; + + uart0: serial@18020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18020000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "okay"; + }; + + gic: interrupt-controller@19021000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x19021000 0x1000>, + <0x19020100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x19022000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + timer@19020200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x19020200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + }; + +}; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts new file mode 100644 index 000000000000..9de5e87b5c9e --- /dev/null +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -0,0 +1,32 @@ +/* + * Copyright 2014 Broadcom Corporation. All rights reserved. + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" + +/ { + model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)"; + compatible = "brcm,bcm11360", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + serial1 = &uart0; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts new file mode 100644 index 000000000000..dd4f102f2e23 --- /dev/null +++ b/arch/arm/boot/dts/bcm911360k.dts @@ -0,0 +1,32 @@ +/* + * Copyright 2014 Broadcom Corporation. All rights reserved. + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" + +/ { + model = "Cygnus SVK (BCM911360K)"; + compatible = "brcm,bcm11360", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + serial1 = &uart0; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts new file mode 100644 index 000000000000..f8b962570221 --- /dev/null +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -0,0 +1,32 @@ +/* + * Copyright 2014 Broadcom Corporation. All rights reserved. + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" + +/ { + model = "Cygnus SVK (BCM958300K)"; + compatible = "brcm,bcm58300", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + serial1 = &uart0; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts index c72bfd468d10..04f391b5c124 100644 --- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts +++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts @@ -26,4 +26,13 @@ }; }; +ð1 { status = "okay"; }; + +/* Samsung M8G2FA 8GB eMMC */ +&sdhci2 { + non-removable; + bus-width = <8>; + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 9d7c810ebd0b..20e7c394a008 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -53,6 +53,35 @@ ranges = <0 0xf7000000 0x1000000>; + sdhci0: sdhci@ab0000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab0000 0x200>; + clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>; + clock-names = "io", "core"; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdhci1: sdhci@ab0800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab0800 0x200>; + clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>; + clock-names = "io", "core"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdhci2: sdhci@ab1000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab1000 0x200>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>; + clock-names = "io", "core"; + pinctrl-0 = <&emmc_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + l2: l2-cache-controller@ac0000 { compatible = "marvell,tauros3-cache", "arm,pl310-cache"; reg = <0xac0000 0x1000>; @@ -79,11 +108,47 @@ clocks = <&chip CLKID_TWD>; }; + eth1: ethernet@b90000 { + compatible = "marvell,pxa168-eth"; + reg = <0xb90000 0x10000>; + clocks = <&chip CLKID_GETH1>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + /* set by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + #address-cells = <1>; + #size-cells = <0>; + phy-connection-type = "mii"; + phy-handle = <ðphy1>; + status = "disabled"; + + ethphy1: ethernet-phy@0 { + reg = <0>; + }; + }; + cpu-ctrl@dd0000 { compatible = "marvell,berlin-cpu-ctrl"; reg = <0xdd0000 0x10000>; }; + eth0: ethernet@e50000 { + compatible = "marvell,pxa168-eth"; + reg = <0xe50000 0x10000>; + clocks = <&chip CLKID_GETH0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + /* set by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + #address-cells = <1>; + #size-cells = <0>; + phy-connection-type = "mii"; + phy-handle = <ðphy0>; + status = "disabled"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + }; + apb@e80000 { compatible = "simple-bus"; #address-cells = <1>; @@ -249,9 +314,15 @@ chip: chip-control@ea0000 { compatible = "marvell,berlin2-chip-ctrl"; #clock-cells = <1>; + #reset-cells = <2>; reg = <0xea0000 0x400>; clocks = <&refclk>; clock-names = "refclk"; + + emmc_pmux: emmc-pmux { + groups = "G26"; + function = "emmc"; + }; }; apb@fc0000 { diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts index bcd81ffc495d..bdcaff7c321e 100644 --- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "berlin2cd.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Google Chromecast"; @@ -24,6 +25,31 @@ device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; + + leds { + compatible = "gpio-leds"; + + white { + label = "white"; + gpios = <&portc 1 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + red { + label = "red"; + gpios = <&portc 2 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; +}; + +/* + * AzureWave AW-NH387 (Marvell 88W8787) + * 802.11b/g/n + Bluetooth 2.1 + */ +&sdhci0 { + non-removable; + status = "okay"; }; &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index cc1df65da504..9e338ff80fd3 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -45,6 +45,15 @@ ranges = <0 0xf7000000 0x1000000>; + sdhci0: sdhci@ab0000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab0000 0x200>; + clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>; + clock-names = "io", "core"; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + l2: l2-cache-controller@ac0000 { compatible = "arm,pl310-cache"; reg = <0xac0000 0x1000>; @@ -66,6 +75,42 @@ clocks = <&chip CLKID_TWD>; }; + eth1: ethernet@b90000 { + compatible = "marvell,pxa168-eth"; + reg = <0xb90000 0x10000>; + clocks = <&chip CLKID_GETH1>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + /* set by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + #address-cells = <1>; + #size-cells = <0>; + phy-connection-type = "mii"; + phy-handle = <ðphy1>; + status = "disabled"; + + ethphy1: ethernet-phy@0 { + reg = <0>; + }; + }; + + eth0: ethernet@e50000 { + compatible = "marvell,pxa168-eth"; + reg = <0xe50000 0x10000>; + clocks = <&chip CLKID_GETH0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + /* set by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + #address-cells = <1>; + #size-cells = <0>; + phy-connection-type = "mii"; + phy-handle = <ðphy0>; + status = "disabled"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + }; + apb@e80000 { compatible = "simple-bus"; #address-cells = <1>; @@ -231,6 +276,7 @@ chip: chip-control@ea0000 { compatible = "marvell,berlin2cd-chip-ctrl"; #clock-cells = <1>; + #reset-cells = <2>; reg = <0xea0000 0x400>; clocks = <&refclk>; clock-names = "refclk"; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index ea1f99b8eed6..a403b0a5ba91 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -49,3 +49,11 @@ ð0 { status = "okay"; }; + +&sata0 { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 891d56b03922..a35deb37ffb5 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -123,6 +123,7 @@ local-mac-address = [00 00 00 00 00 00]; #address-cells = <1>; #size-cells = <0>; + phy-connection-type = "mii"; phy-handle = <ðphy0>; status = "disabled"; @@ -255,7 +256,6 @@ reg = <0x2c14 0x14>; clocks = <&chip CLKID_CFG>; clock-names = "timer"; - status = "disabled"; }; timer2: timer@2c28 { @@ -349,6 +349,7 @@ chip: chip-control@ea0000 { compatible = "marvell,berlin2q-chip-ctrl"; #clock-cells = <1>; + #reset-cells = <2>; reg = <0xea0000 0x400>, <0xdd0170 0x10>; clocks = <&refclk>; clock-names = "refclk"; @@ -364,6 +365,45 @@ }; }; + ahci: sata@e90000 { + compatible = "marvell,berlin2q-ahci", "generic-ahci"; + reg = <0xe90000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy 0>; + status = "disabled"; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy 1>; + status = "disabled"; + }; + }; + + sata_phy: phy@e900a0 { + compatible = "marvell,berlin2q-sata-phy"; + reg = <0xe900a0 0x200>; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + #phy-cells = <1>; + status = "disabled"; + + sata-phy@0 { + reg = <0>; + }; + + sata-phy@1 { + reg = <1>; + }; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 693a3275606f..242ddda0a8cd 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -320,6 +320,16 @@ status = "disabled"; }; + mfc: codec@13400000 { + compatible = "samsung,mfc-v7"; + reg = <0x13400000 0x10000>; + interrupts = <0 102 0>; + clock-names = "mfc", "sclk_mfc"; + clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>; + samsung,power-domain = <&pd_mfc>; + status = "disabled"; + }; + serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 807bb5bf91fc..bcc9e63c8070 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,23 @@ pinctrl2 = &pinctrl_2; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@900 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x900>; + }; + + cpu@901 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x901>; + }; + }; + pmu_system_controller: system-controller@10020000 { clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index 3c00e6ec9302..dd0a43ec56da 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -22,6 +22,23 @@ / { compatible = "samsung,exynos4212", "samsung,exynos4"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@A00 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA00>; + }; + + cpu@A01 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA01>; + }; + }; + combiner: interrupt-controller@10440000 { samsung,combiner-nr = <18>; }; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 5e066cd87f66..dd9ac66770f7 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Trats 2 based on Exynos4412"; @@ -22,6 +23,7 @@ aliases { i2c9 = &i2c_ak8975; i2c10 = &i2c_cm36651; + i2c11 = &i2c_max77693; }; memory { @@ -399,8 +401,6 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-mem-off; }; ldo23_reg: ldo23 { @@ -503,8 +503,6 @@ regulator-name = "VMEM_VDDF_3.0V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-mem-off; }; buck9_reg: buck9 { @@ -518,6 +516,36 @@ }; }; + i2c_max77693: i2c-gpio-1 { + compatible = "i2c-gpio"; + gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max77693@66 { + compatible = "maxim,max77693"; + interrupt-parent = <&gpx1>; + interrupts = <5 2>; + reg = <0x66>; + + regulators { + esafeout1_reg: ESAFEOUT1@1 { + regulator-name = "ESAFEOUT1"; + }; + esafeout2_reg: ESAFEOUT2@2 { + regulator-name = "ESAFEOUT2"; + }; + charger_reg: CHARGER@0 { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + }; + }; + mmc@12550000 { num-slots = <1>; broken-cd; @@ -782,3 +810,319 @@ io-channels = <&adc 2>; /* Battery temperature */ }; }; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + sleep0: sleep-states { + PIN_SLP(gpa0-0, INPUT, NONE); + PIN_SLP(gpa0-1, OUT0, NONE); + PIN_SLP(gpa0-2, INPUT, NONE); + PIN_SLP(gpa0-3, INPUT, UP); + PIN_SLP(gpa0-4, INPUT, NONE); + PIN_SLP(gpa0-5, INPUT, DOWN); + PIN_SLP(gpa0-6, INPUT, DOWN); + PIN_SLP(gpa0-7, INPUT, UP); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, INPUT, DOWN); + PIN_SLP(gpa1-2, INPUT, DOWN); + PIN_SLP(gpa1-3, INPUT, DOWN); + PIN_SLP(gpa1-4, INPUT, DOWN); + PIN_SLP(gpa1-5, INPUT, DOWN); + + PIN_SLP(gpb-0, INPUT, NONE); + PIN_SLP(gpb-1, INPUT, NONE); + PIN_SLP(gpb-2, INPUT, NONE); + PIN_SLP(gpb-3, INPUT, NONE); + PIN_SLP(gpb-4, INPUT, DOWN); + PIN_SLP(gpb-5, INPUT, UP); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, INPUT, DOWN); + + PIN_SLP(gpc0-0, INPUT, DOWN); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, INPUT, DOWN); + PIN_SLP(gpc0-3, INPUT, DOWN); + PIN_SLP(gpc0-4, INPUT, DOWN); + + PIN_SLP(gpc1-0, INPUT, NONE); + PIN_SLP(gpc1-1, PREV, NONE); + PIN_SLP(gpc1-2, INPUT, NONE); + PIN_SLP(gpc1-3, INPUT, NONE); + PIN_SLP(gpc1-4, INPUT, NONE); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, INPUT, DOWN); + PIN_SLP(gpd0-2, INPUT, NONE); + PIN_SLP(gpd0-3, INPUT, NONE); + + PIN_SLP(gpd1-0, INPUT, DOWN); + PIN_SLP(gpd1-1, INPUT, DOWN); + PIN_SLP(gpd1-2, INPUT, NONE); + PIN_SLP(gpd1-3, INPUT, NONE); + + PIN_SLP(gpf0-0, INPUT, NONE); + PIN_SLP(gpf0-1, INPUT, NONE); + PIN_SLP(gpf0-2, INPUT, DOWN); + PIN_SLP(gpf0-3, INPUT, DOWN); + PIN_SLP(gpf0-4, INPUT, NONE); + PIN_SLP(gpf0-5, INPUT, DOWN); + PIN_SLP(gpf0-6, INPUT, NONE); + PIN_SLP(gpf0-7, INPUT, DOWN); + + PIN_SLP(gpf1-0, INPUT, DOWN); + PIN_SLP(gpf1-1, INPUT, DOWN); + PIN_SLP(gpf1-2, INPUT, DOWN); + PIN_SLP(gpf1-3, INPUT, DOWN); + PIN_SLP(gpf1-4, INPUT, NONE); + PIN_SLP(gpf1-5, INPUT, NONE); + PIN_SLP(gpf1-6, INPUT, DOWN); + PIN_SLP(gpf1-7, PREV, NONE); + + PIN_SLP(gpf2-0, PREV, NONE); + PIN_SLP(gpf2-1, INPUT, DOWN); + PIN_SLP(gpf2-2, INPUT, DOWN); + PIN_SLP(gpf2-3, INPUT, DOWN); + PIN_SLP(gpf2-4, INPUT, DOWN); + PIN_SLP(gpf2-5, INPUT, DOWN); + PIN_SLP(gpf2-6, INPUT, NONE); + PIN_SLP(gpf2-7, INPUT, NONE); + + PIN_SLP(gpf3-0, INPUT, NONE); + PIN_SLP(gpf3-1, PREV, NONE); + PIN_SLP(gpf3-2, PREV, NONE); + PIN_SLP(gpf3-3, PREV, NONE); + PIN_SLP(gpf3-4, OUT1, NONE); + PIN_SLP(gpf3-5, INPUT, DOWN); + + PIN_SLP(gpj0-0, PREV, NONE); + PIN_SLP(gpj0-1, PREV, NONE); + PIN_SLP(gpj0-2, PREV, NONE); + PIN_SLP(gpj0-3, INPUT, DOWN); + PIN_SLP(gpj0-4, PREV, NONE); + PIN_SLP(gpj0-5, PREV, NONE); + PIN_SLP(gpj0-6, INPUT, DOWN); + PIN_SLP(gpj0-7, INPUT, DOWN); + + PIN_SLP(gpj1-0, INPUT, DOWN); + PIN_SLP(gpj1-1, PREV, NONE); + PIN_SLP(gpj1-2, PREV, NONE); + PIN_SLP(gpj1-3, INPUT, DOWN); + PIN_SLP(gpj1-4, INPUT, DOWN); + }; +}; + +&pinctrl_1 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep1>; + + sleep1: sleep-states { + PIN_SLP(gpk0-0, PREV, NONE); + PIN_SLP(gpk0-1, PREV, NONE); + PIN_SLP(gpk0-2, OUT0, NONE); + PIN_SLP(gpk0-3, PREV, NONE); + PIN_SLP(gpk0-4, PREV, NONE); + PIN_SLP(gpk0-5, PREV, NONE); + PIN_SLP(gpk0-6, PREV, NONE); + + PIN_SLP(gpk1-0, INPUT, DOWN); + PIN_SLP(gpk1-1, INPUT, DOWN); + PIN_SLP(gpk1-2, INPUT, DOWN); + PIN_SLP(gpk1-3, PREV, NONE); + PIN_SLP(gpk1-4, PREV, NONE); + PIN_SLP(gpk1-5, PREV, NONE); + PIN_SLP(gpk1-6, PREV, NONE); + + PIN_SLP(gpk2-0, INPUT, DOWN); + PIN_SLP(gpk2-1, INPUT, DOWN); + PIN_SLP(gpk2-2, INPUT, DOWN); + PIN_SLP(gpk2-3, INPUT, DOWN); + PIN_SLP(gpk2-4, INPUT, DOWN); + PIN_SLP(gpk2-5, INPUT, DOWN); + PIN_SLP(gpk2-6, INPUT, DOWN); + + PIN_SLP(gpk3-0, OUT0, NONE); + PIN_SLP(gpk3-1, INPUT, NONE); + PIN_SLP(gpk3-2, INPUT, DOWN); + PIN_SLP(gpk3-3, INPUT, NONE); + PIN_SLP(gpk3-4, INPUT, NONE); + PIN_SLP(gpk3-5, INPUT, NONE); + PIN_SLP(gpk3-6, INPUT, NONE); + + PIN_SLP(gpl0-0, INPUT, DOWN); + PIN_SLP(gpl0-1, INPUT, DOWN); + PIN_SLP(gpl0-2, INPUT, DOWN); + PIN_SLP(gpl0-3, INPUT, DOWN); + PIN_SLP(gpl0-4, PREV, NONE); + PIN_SLP(gpl0-6, PREV, NONE); + + PIN_SLP(gpl1-0, INPUT, DOWN); + PIN_SLP(gpl1-1, INPUT, DOWN); + PIN_SLP(gpl2-0, INPUT, DOWN); + PIN_SLP(gpl2-1, INPUT, DOWN); + PIN_SLP(gpl2-2, INPUT, DOWN); + PIN_SLP(gpl2-3, INPUT, DOWN); + PIN_SLP(gpl2-4, INPUT, DOWN); + PIN_SLP(gpl2-5, INPUT, DOWN); + PIN_SLP(gpl2-6, PREV, NONE); + PIN_SLP(gpl2-7, INPUT, DOWN); + + PIN_SLP(gpm0-0, INPUT, DOWN); + PIN_SLP(gpm0-1, INPUT, DOWN); + PIN_SLP(gpm0-2, INPUT, DOWN); + PIN_SLP(gpm0-3, INPUT, DOWN); + PIN_SLP(gpm0-4, INPUT, DOWN); + PIN_SLP(gpm0-5, INPUT, DOWN); + PIN_SLP(gpm0-6, INPUT, DOWN); + PIN_SLP(gpm0-7, INPUT, DOWN); + + PIN_SLP(gpm1-0, INPUT, DOWN); + PIN_SLP(gpm1-1, INPUT, DOWN); + PIN_SLP(gpm1-2, INPUT, NONE); + PIN_SLP(gpm1-3, INPUT, NONE); + PIN_SLP(gpm1-4, INPUT, NONE); + PIN_SLP(gpm1-5, INPUT, NONE); + PIN_SLP(gpm1-6, INPUT, DOWN); + + PIN_SLP(gpm2-0, INPUT, NONE); + PIN_SLP(gpm2-1, INPUT, NONE); + PIN_SLP(gpm2-2, INPUT, DOWN); + PIN_SLP(gpm2-3, INPUT, DOWN); + PIN_SLP(gpm2-4, INPUT, DOWN); + + PIN_SLP(gpm3-0, PREV, NONE); + PIN_SLP(gpm3-1, PREV, NONE); + PIN_SLP(gpm3-2, PREV, NONE); + PIN_SLP(gpm3-3, OUT1, NONE); + PIN_SLP(gpm3-4, INPUT, DOWN); + PIN_SLP(gpm3-5, INPUT, DOWN); + PIN_SLP(gpm3-6, INPUT, DOWN); + PIN_SLP(gpm3-7, INPUT, DOWN); + + PIN_SLP(gpm4-0, INPUT, DOWN); + PIN_SLP(gpm4-1, INPUT, DOWN); + PIN_SLP(gpm4-2, INPUT, DOWN); + PIN_SLP(gpm4-3, INPUT, DOWN); + PIN_SLP(gpm4-4, INPUT, DOWN); + PIN_SLP(gpm4-5, INPUT, DOWN); + PIN_SLP(gpm4-6, INPUT, DOWN); + PIN_SLP(gpm4-7, INPUT, DOWN); + + PIN_SLP(gpy0-0, INPUT, DOWN); + PIN_SLP(gpy0-1, INPUT, DOWN); + PIN_SLP(gpy0-2, INPUT, DOWN); + PIN_SLP(gpy0-3, INPUT, DOWN); + PIN_SLP(gpy0-4, INPUT, DOWN); + PIN_SLP(gpy0-5, INPUT, DOWN); + + PIN_SLP(gpy1-0, INPUT, DOWN); + PIN_SLP(gpy1-1, INPUT, DOWN); + PIN_SLP(gpy1-2, INPUT, DOWN); + PIN_SLP(gpy1-3, INPUT, DOWN); + + PIN_SLP(gpy2-0, PREV, NONE); + PIN_SLP(gpy2-1, INPUT, DOWN); + PIN_SLP(gpy2-2, INPUT, NONE); + PIN_SLP(gpy2-3, INPUT, NONE); + PIN_SLP(gpy2-4, INPUT, NONE); + PIN_SLP(gpy2-5, INPUT, NONE); + + PIN_SLP(gpy3-0, INPUT, DOWN); + PIN_SLP(gpy3-1, INPUT, DOWN); + PIN_SLP(gpy3-2, INPUT, DOWN); + PIN_SLP(gpy3-3, INPUT, DOWN); + PIN_SLP(gpy3-4, INPUT, DOWN); + PIN_SLP(gpy3-5, INPUT, DOWN); + PIN_SLP(gpy3-6, INPUT, DOWN); + PIN_SLP(gpy3-7, INPUT, DOWN); + + PIN_SLP(gpy4-0, INPUT, DOWN); + PIN_SLP(gpy4-1, INPUT, DOWN); + PIN_SLP(gpy4-2, INPUT, DOWN); + PIN_SLP(gpy4-3, INPUT, DOWN); + PIN_SLP(gpy4-4, INPUT, DOWN); + PIN_SLP(gpy4-5, INPUT, DOWN); + PIN_SLP(gpy4-6, INPUT, DOWN); + PIN_SLP(gpy4-7, INPUT, DOWN); + + PIN_SLP(gpy5-0, INPUT, DOWN); + PIN_SLP(gpy5-1, INPUT, DOWN); + PIN_SLP(gpy5-2, INPUT, DOWN); + PIN_SLP(gpy5-3, INPUT, DOWN); + PIN_SLP(gpy5-4, INPUT, DOWN); + PIN_SLP(gpy5-5, INPUT, DOWN); + PIN_SLP(gpy5-6, INPUT, DOWN); + PIN_SLP(gpy5-7, INPUT, DOWN); + + PIN_SLP(gpy6-0, INPUT, DOWN); + PIN_SLP(gpy6-1, INPUT, DOWN); + PIN_SLP(gpy6-2, INPUT, DOWN); + PIN_SLP(gpy6-3, INPUT, DOWN); + PIN_SLP(gpy6-4, INPUT, DOWN); + PIN_SLP(gpy6-5, INPUT, DOWN); + PIN_SLP(gpy6-6, INPUT, DOWN); + PIN_SLP(gpy6-7, INPUT, DOWN); + }; +}; + +&pinctrl_2 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep2>; + + sleep2: sleep-states { + PIN_SLP(gpz-0, INPUT, DOWN); + PIN_SLP(gpz-1, INPUT, DOWN); + PIN_SLP(gpz-2, INPUT, DOWN); + PIN_SLP(gpz-3, INPUT, DOWN); + PIN_SLP(gpz-4, INPUT, DOWN); + PIN_SLP(gpz-5, INPUT, DOWN); + PIN_SLP(gpz-6, INPUT, DOWN); + }; +}; + +&pinctrl_3 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep3>; + + sleep3: sleep-states { + PIN_SLP(gpv0-0, INPUT, DOWN); + PIN_SLP(gpv0-1, INPUT, DOWN); + PIN_SLP(gpv0-2, INPUT, DOWN); + PIN_SLP(gpv0-3, INPUT, DOWN); + PIN_SLP(gpv0-4, INPUT, DOWN); + PIN_SLP(gpv0-5, INPUT, DOWN); + PIN_SLP(gpv0-6, INPUT, DOWN); + PIN_SLP(gpv0-7, INPUT, DOWN); + + PIN_SLP(gpv1-0, INPUT, DOWN); + PIN_SLP(gpv1-1, INPUT, DOWN); + PIN_SLP(gpv1-2, INPUT, DOWN); + PIN_SLP(gpv1-3, INPUT, DOWN); + PIN_SLP(gpv1-4, INPUT, DOWN); + PIN_SLP(gpv1-5, INPUT, DOWN); + PIN_SLP(gpv1-6, INPUT, DOWN); + PIN_SLP(gpv1-7, INPUT, DOWN); + + PIN_SLP(gpv2-0, INPUT, DOWN); + PIN_SLP(gpv2-1, INPUT, DOWN); + PIN_SLP(gpv2-2, INPUT, DOWN); + PIN_SLP(gpv2-3, INPUT, DOWN); + PIN_SLP(gpv2-4, INPUT, DOWN); + PIN_SLP(gpv2-5, INPUT, DOWN); + PIN_SLP(gpv2-6, INPUT, DOWN); + PIN_SLP(gpv2-7, INPUT, DOWN); + + PIN_SLP(gpv3-0, INPUT, DOWN); + PIN_SLP(gpv3-1, INPUT, DOWN); + PIN_SLP(gpv3-2, INPUT, DOWN); + PIN_SLP(gpv3-3, INPUT, DOWN); + PIN_SLP(gpv3-4, INPUT, DOWN); + PIN_SLP(gpv3-5, INPUT, DOWN); + PIN_SLP(gpv3-6, INPUT, DOWN); + PIN_SLP(gpv3-7, INPUT, DOWN); + + PIN_SLP(gpv4-0, INPUT, DOWN); + }; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index d8bc059e172f..0f6ec93bb1d8 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -22,6 +22,35 @@ / { compatible = "samsung,exynos4412", "samsung,exynos4"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@A00 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA00>; + }; + + cpu@A01 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA01>; + }; + + cpu@A02 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA02>; + }; + + cpu@A03 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA03>; + }; + }; + combiner: interrupt-controller@10440000 { samsung,combiner-nr = <20>; }; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 0865a2e33f97..c141931378e7 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -12,6 +12,22 @@ * published by the Free Software Foundation. */ +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 3 + +#define PIN_PDN_OUT0 0 +#define PIN_PDN_OUT1 1 +#define PIN_PDN_INPUT 2 +#define PIN_PDN_PREV 3 + +#define PIN_SLP(_pin, _mode, _pull) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-con-pdn = <PIN_PDN_ ##_mode>; \ + samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>; \ + } + / { pinctrl@11400000 { gpa0: gpa0 { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 3acd97eb6630..7e728a1b5559 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -7,12 +7,13 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ /dts-v1/; -#include "exynos5250.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> +#include "exynos5250.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -26,465 +27,52 @@ bootargs = "console=ttySAC2,115200"; }; - rtc@101E0000 { - status = "okay"; - }; - - codec@11000000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - }; - - i2c@12C60000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - samsung,i2c-slave-addr = <0x66>; - status = "okay"; - - s5m8767_pmic@66 { - compatible = "samsung,s5m8767-pmic"; - reg = <0x66>; - interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - - vinb1-supply = <&main_dc_reg>; - vinb2-supply = <&main_dc_reg>; - vinb3-supply = <&main_dc_reg>; - vinb4-supply = <&main_dc_reg>; - vinb5-supply = <&main_dc_reg>; - vinb6-supply = <&main_dc_reg>; - vinb7-supply = <&main_dc_reg>; - vinb8-supply = <&main_dc_reg>; - vinb9-supply = <&main_dc_reg>; - - vinl1-supply = <&buck7_reg>; - vinl2-supply = <&buck7_reg>; - vinl3-supply = <&buck7_reg>; - vinl4-supply = <&main_dc_reg>; - vinl5-supply = <&main_dc_reg>; - vinl6-supply = <&main_dc_reg>; - vinl7-supply = <&main_dc_reg>; - vinl8-supply = <&buck8_reg>; - vinl9-supply = <&buck8_reg>; - - s5m8767,pmic-buck2-dvs-voltage = <1300000>; - s5m8767,pmic-buck3-dvs-voltage = <1100000>; - s5m8767,pmic-buck4-dvs-voltage = <1200000>; - s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>, - <&gpd1 1 0>, - <&gpd1 2 0>; - s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, - <&gpx2 4 0>, - <&gpx2 5 0>; - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_1.0V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_28IO_DP_1.35V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo3_reg: LDO3 { - regulator-name = "VDD_COMMON1_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDD_IOPERI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; - }; - - ldo5_reg: LDO5 { - regulator-name = "VDD_EXT_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD_MPLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD_XPLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VDD_COMMON2_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo9_reg: LDO9 { - regulator-name = "VDD_33ON_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - op_mode = <1>; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD_COMMON3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD_ABB2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD_USB_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo13_reg: LDO13 { - regulator-name = "VDDQ_C2C_W_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo14_reg: LDO14 { - regulator-name = "VDD18_ABB0_3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo15_reg: LDO15 { - regulator-name = "VDD10_COMMON4_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo16_reg: LDO16 { - regulator-name = "VDD18_HSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo17_reg: LDO17 { - regulator-name = "VDDQ_MMC2_3_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo18_reg: LDO18 { - regulator-name = "VDD_33ON_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - op_mode = <1>; - }; - - ldo22_reg: LDO22 { - regulator-name = "EXT_33_OFF"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - op_mode = <1>; - }; - - ldo23_reg: LDO23 { - regulator-name = "EXT_28_OFF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - op_mode = <1>; - }; - - ldo25_reg: LDO25 { - regulator-name = "PVDD_LDO25"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - op_mode = <1>; - }; - - ldo26_reg: LDO26 { - regulator-name = "EXT_18_OFF"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - op_mode = <1>; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDD_MEM_1.35V"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1355000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck7_reg: BUCK7 { - regulator-name = "PVDD_BUCK7"; - regulator-always-on; - op_mode = <1>; - }; - - buck8_reg: BUCK8 { - regulator-name = "PVDD_BUCK8"; - regulator-always-on; - op_mode = <1>; - }; - - buck9_reg: BUCK9 { - regulator-name = "VDD_33_OFF_EXT1"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3000000>; - op_mode = <1>; - }; - }; - }; - }; - - i2c@12C80000 { - status = "okay"; - - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x50>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; - }; - - i2c@12C90000 { - status = "okay"; - - wm1811a@1a { - - compatible = "wlf,wm1811"; - reg = <0x1a>; - - AVDD2-supply = <&main_dc_reg>; - CPVDD-supply = <&main_dc_reg>; - DBVDD1-supply = <&main_dc_reg>; - DBVDD2-supply = <&main_dc_reg>; - DBVDD3-supply = <&main_dc_reg>; - LDO1VDD-supply = <&main_dc_reg>; - SPKVDD1-supply = <&main_dc_reg>; - SPKVDD2-supply = <&main_dc_reg>; - - wlf,ldo1ena = <&gpb0 0 0>; - wlf,ldo2ena = <&gpb0 1 0>; - }; - }; - - i2c@12CE0000 { - status = "okay"; - - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x38>; - - hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; - }; - - i2c@121D0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <40000>; - samsung,i2c-slave-addr = <0x38>; - - sata_phy_i2c:sata-phy@38 { - compatible = "samsung,exynos-sataphy-i2c"; - reg = <0x38>; - }; - }; - - sata@122F0000 { - status = "okay"; - }; - - sata-phy@12170000 { - status = "okay"; - samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; - }; - - mmc_0: mmc@12200000 { - status = "okay"; - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - vmmc-supply = <&mmc_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - cap-mmc-highspeed; - }; - - mmc_2: mmc@12220000 { - status = "okay"; - num-slots = <1>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - vmmc-supply = <&mmc_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - }; - - i2s0: i2s@03830000 { - status = "okay"; - }; - gpio_keys { compatible = "gpio-keys"; menu { label = "SW-TACT2"; - gpios = <&gpx1 4 1>; + gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; gpio-key,wakeup; }; home { label = "SW-TACT3"; - gpios = <&gpx1 5 1>; + gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; gpio-key,wakeup; }; up { label = "SW-TACT4"; - gpios = <&gpx1 6 1>; + gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; gpio-key,wakeup; }; down { label = "SW-TACT5"; - gpios = <&gpx1 7 1>; + gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_DOWN>; gpio-key,wakeup; }; back { label = "SW-TACT6"; - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; gpio-key,wakeup; }; wakeup { label = "SW-TACT7"; - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; gpio-key,wakeup; }; }; - hdmi { - hpd-gpio = <&gpx3 7 2>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; - vdd-supply = <&ldo8_reg>; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -502,7 +90,7 @@ regulator-name = "VDD_33ON_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 1>; + gpio = <&gpx1 1 GPIO_ACTIVE_LOW>; enable-active-high; }; @@ -520,46 +108,455 @@ }; }; - dp-controller@145B0000 { - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - status = "okay"; + // SMSC USB3503 connected in hardware only mode as a PHY + usb_hub: usb-hub { + compatible = "smsc,usb3503a"; + + reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>; }; +}; - fimd: fimd@14400000 { - status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing@0 { - /* 2560x1600 DP panel */ - clock-frequency = <50000>; - hactive = <2560>; - vactive = <1600>; - hfront-porch = <48>; - hback-porch = <80>; - hsync-len = <32>; - vback-porch = <16>; - vfront-porch = <8>; - vsync-len = <6>; - }; +&dp { + status = "okay"; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; +}; + +&fimd { + status = "okay"; + + display-timings { + native-mode = <&timing0>; + + timing0: timing@0 { + /* 2560x1600 DP panel */ + clock-frequency = <50000>; + hactive = <2560>; + vactive = <1600>; + hfront-porch = <48>; + hback-porch = <80>; + hsync-len = <32>; + vback-porch = <16>; + vfront-porch = <8>; + vsync-len = <6>; }; }; +}; - usb_hub_bus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + vdd-supply = <&ldo8_reg>; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + samsung,i2c-slave-addr = <0x66>; + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + vinb1-supply = <&main_dc_reg>; + vinb2-supply = <&main_dc_reg>; + vinb3-supply = <&main_dc_reg>; + vinb4-supply = <&main_dc_reg>; + vinb5-supply = <&main_dc_reg>; + vinb6-supply = <&main_dc_reg>; + vinb7-supply = <&main_dc_reg>; + vinb8-supply = <&main_dc_reg>; + vinb9-supply = <&main_dc_reg>; + + vinl1-supply = <&buck7_reg>; + vinl2-supply = <&buck7_reg>; + vinl3-supply = <&buck7_reg>; + vinl4-supply = <&main_dc_reg>; + vinl5-supply = <&main_dc_reg>; + vinl6-supply = <&main_dc_reg>; + vinl7-supply = <&main_dc_reg>; + vinl8-supply = <&buck8_reg>; + vinl9-supply = <&buck8_reg>; + + s5m8767,pmic-buck2-dvs-voltage = <1300000>; + s5m8767,pmic-buck3-dvs-voltage = <1100000>; + s5m8767,pmic-buck4-dvs-voltage = <1200000>; + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, + <&gpd1 1 GPIO_ACTIVE_HIGH>, + <&gpd1 2 GPIO_ACTIVE_HIGH>; + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, + <&gpx2 4 GPIO_ACTIVE_HIGH>, + <&gpx2 5 GPIO_ACTIVE_HIGH>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; - // SMSC USB3503 connected in hardware only mode as a PHY - usb_hub: usb_hub { - compatible = "smsc,usb3503a"; + ldo2_reg: LDO2 { + regulator-name = "VDD_28IO_DP_1.35V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD_COMMON1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_IOPERI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD_MPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; - reset-gpios = <&gpx3 5 1>; - connect-gpios = <&gpd1 7 1>; + ldo7_reg: LDO7 { + regulator-name = "VDD_XPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD_COMMON2_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD_33ON_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_COMMON3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_ABB2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_USB_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_COMMON4_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDQ_MMC2_3_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo18_reg: LDO18 { + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo22_reg: LDO22 { + regulator-name = "EXT_33_OFF"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; + }; + + ldo23_reg: LDO23 { + regulator-name = "EXT_28_OFF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo25_reg: LDO25 { + regulator-name = "PVDD_LDO25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + op_mode = <1>; + }; + + ldo26_reg: LDO26 { + regulator-name = "EXT_18_OFF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_MEM_1.35V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1355000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck7_reg: BUCK7 { + regulator-name = "PVDD_BUCK7"; + regulator-always-on; + op_mode = <1>; + }; + + buck8_reg: BUCK8 { + regulator-name = "PVDD_BUCK8"; + regulator-always-on; + op_mode = <1>; + }; + + buck9_reg: BUCK9 { + regulator-name = "VDD_33_OFF_EXT1"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + }; }; }; }; + +&i2c_2 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + + wm1811a@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + + AVDD2-supply = <&main_dc_reg>; + CPVDD-supply = <&main_dc_reg>; + DBVDD1-supply = <&main_dc_reg>; + DBVDD2-supply = <&main_dc_reg>; + DBVDD3-supply = <&main_dc_reg>; + LDO1VDD-supply = <&main_dc_reg>; + SPKVDD1-supply = <&main_dc_reg>; + SPKVDD2-supply = <&main_dc_reg>; + + wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>; + wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c_8 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x38>; + + hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&i2c_9 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + samsung,i2c-slave-addr = <0x38>; + + sata_phy_i2c:sata-phy@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + vmmc-supply = <&mmc_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + vmmc-supply = <&mmc_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; + samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; +}; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 6a0f4c0ff763..bc27cc2558fe 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -7,9 +7,11 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "exynos5250.dtsi" / { @@ -27,165 +29,6 @@ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; - rtc@101E0000 { - status = "okay"; - }; - - i2c@12C60000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - status = "okay"; - - eeprom@50 { - compatible = "samsung,s524ad0xd1"; - reg = <0x50>; - }; - - max77686@09 { - compatible = "maxim,max77686"; - reg = <0x09>; - interrupt-parent = <&gpx3>; - interrupts = <2 0>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "P1.0V_LDO_OUT1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "P1.2V_LDO_OUT2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "P1.8V_LDO_OUT3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "P2.8V_LDO_OUT4"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "P1.8V_LDO_OUT5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo6_reg: LDO6 { - regulator-name = "P1.1V_LDO_OUT6"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "P1.1V_LDO_OUT7"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "P1.0V_LDO_OUT8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo10_reg: LDO10 { - regulator-name = "P1.8V_LDO_OUT10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo11_reg: LDO11 { - regulator-name = "P1.8V_LDO_OUT11"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo12_reg: LDO12 { - regulator-name = "P3.0V_LDO_OUT12"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo13_reg: LDO13 { - regulator-name = "P1.8V_LDO_OUT13"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo14_reg: LDO14 { - regulator-name = "P1.8V_LDO_OUT14"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "P1.0V_LDO_OUT15"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo16_reg: LDO16 { - regulator-name = "P1.8V_LDO_OUT16"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "P1.8V_BUCK_OUT5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; - }; - vdd: fixed-regulator@0 { compatible = "regulator-fixed"; regulator-name = "vdd-supply"; @@ -210,199 +53,360 @@ regulator-always-on; }; - i2c@12C70000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - status = "okay"; + sound { + compatible = "samsung,smdk-wm8994"; - eeprom@51 { - compatible = "samsung,s524ad0xd1"; - reg = <0x51>; + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&wm8994>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; }; - wm8994: wm8994@1a { - compatible = "wlf,wm8994"; - reg = <0x1a>; + codec_mclk: codec-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16934000>; + }; + }; +}; - gpio-controller; - #gpio-cells = <2>; +&dp { + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + status = "okay"; +}; - clocks = <&codec_mclk>; - clock-names = "MCLK1"; +&ehci { + samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; +}; - AVDD2-supply = <&vdd>; - CPVDD-supply = <&vdd>; - DBVDD-supply = <&dbvdd>; - SPKVDD1-supply = <&spkvdd>; - SPKVDD2-supply = <&spkvdd>; +&fimd { + status = "okay"; + + display-timings { + native-mode = <&timing0>; + + timing0: timing@0 { + /* 1280x800 */ + clock-frequency = <50000>; + hactive = <1280>; + vactive = <800>; + hfront-porch = <4>; + hback-porch = <4>; + hsync-len = <4>; + vback-porch = <4>; + vfront-porch = <4>; + vsync-len = <4>; }; }; +}; - i2c@121D0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <40000>; - samsung,i2c-slave-addr = <0x38>; - status = "okay"; +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; +}; - sata_phy_i2c:sata-phy@38 { - compatible = "samsung,exynos-sataphy-i2c"; - reg = <0x38>; - }; +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + + eeprom@50 { + compatible = "samsung,s524ad0xd1"; + reg = <0x50>; }; - i2c@12C80000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - status = "okay"; + max77686@09 { + compatible = "maxim,max77686"; + reg = <0x09>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_NONE>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; - }; + ldo2_reg: LDO2 { + regulator-name = "P1.2V_LDO_OUT2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; - i2c@12CE0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - status = "okay"; + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; - }; + ldo4_reg: LDO4 { + regulator-name = "P2.8V_LDO_OUT4"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; - sata@122F0000 { - status = "okay"; - }; + ldo5_reg: LDO5 { + regulator-name = "P1.8V_LDO_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - sata-phy@12170000 { - status = "okay"; - samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; - }; + ldo6_reg: LDO6 { + regulator-name = "P1.1V_LDO_OUT6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; - mmc@12200000 { - status = "okay"; - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - cap-mmc-highspeed; - }; + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; - mmc@12220000 { - status = "okay"; - num-slots = <1>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - }; + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - spi_1: spi@12d30000 { - cs-gpios = <&gpa2 5 0>; - status = "okay"; + ldo11_reg: LDO11 { + regulator-name = "P1.8V_LDO_OUT11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - w25q80bw@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "w25x80"; - reg = <0>; - spi-max-frequency = <1000000>; + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; - controller-data { - samsung,spi-feedback-delay = <0>; + ldo13_reg: LDO13 { + regulator-name = "P1.8V_LDO_OUT13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - partition@40000 { - label = "Kernel"; - reg = <0x40000 0xc0000>; + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; }; }; }; +}; - hdmi { - hpd-gpio = <&gpx3 7 0>; - }; +&i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; - codec@11000000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + eeprom@51 { + compatible = "samsung,s524ad0xd1"; + reg = <0x51>; }; - i2s0: i2s@03830000 { - status = "okay"; + wm8994: wm8994@1a { + compatible = "wlf,wm8994"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + + clocks = <&codec_mclk>; + clock-names = "MCLK1"; + + AVDD2-supply = <&vdd>; + CPVDD-supply = <&vdd>; + DBVDD-supply = <&dbvdd>; + SPKVDD1-supply = <&spkvdd>; + SPKVDD2-supply = <&spkvdd>; }; +}; - sound { - compatible = "samsung,smdk-wm8994"; +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; - samsung,i2s-controller = <&i2s0>; - samsung,audio-codec = <&wm8994>; + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; }; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; - usb@12110000 { - samsung,vbus-gpio = <&gpx2 6 0>; + hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; }; +}; + +&i2c_9 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + samsung,i2c-slave-addr = <0x38>; - dp-controller@145B0000 { - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - status = "okay"; + sata_phy_i2c: sata-phy@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; }; +}; - fimd@14400000 { - status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing@0 { - /* 1280x800 */ - clock-frequency = <50000>; - hactive = <1280>; - vactive = <800>; - hfront-porch = <4>; - hback-porch = <4>; - hsync-len = <4>; - vback-porch = <4>; - vfront-porch = <4>; - vsync-len = <4>; - }; +&i2s0 { + status = "okay"; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; + samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; +}; + +&spi_1 { + status = "okay"; + cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; + + w25q80bw@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + samsung,spi-feedback-delay = <0>; }; - }; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <24000000>; + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; }; - codec_mclk: codec-mclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <16934000>; + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index e51fcef884a4..f9bc04b8f7b3 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -6,10 +6,13 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/maxim,max77686.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> #include "exynos5250.dtsi" / { @@ -25,76 +28,7 @@ }; chosen { - }; - - rtc@101E0000 { - status = "okay"; - }; - - pinctrl@11400000 { - ec_irq: ec-irq { - samsung,pins = "gpx1-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - sd3_clk: sd3-clk { - samsung,pin-drv = <0>; - }; - - sd3_cmd: sd3-cmd { - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - sd3_bus4: sd3-bus-width4 { - samsung,pin-drv = <0>; - }; - - max98095_en: max98095-en { - samsung,pins = "gpx1-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - tps65090_irq: tps65090-irq { - samsung,pins = "gpx2-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - usb3_vbus_en: usb3-vbus-en { - samsung,pins = "gpx2-7"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; - }; - }; - - pinctrl@13400000 { - arb_their_claim: arb-their-claim { - samsung,pins = "gpe0-4"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - arb_our_claim: arb-our-claim { - samsung,pins = "gpf0-3"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; + bootargs = "console=tty1"; }; gpio-keys { @@ -102,14 +36,14 @@ power { label = "Power"; - gpios = <&gpx1 3 1>; - linux,code = <116>; /* KEY_POWER */ + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; gpio-key,wakeup; }; lid-switch { label = "Lid"; - gpios = <&gpx3 5 1>; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; @@ -130,8 +64,8 @@ i2c-parent = <&{/i2c@12CA0000}>; - our-claim-gpio = <&gpf0 3 1>; - their-claim-gpios = <&gpe0 4 1>; + our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; + their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; slew-delay-us = <10>; wait-retry-us = <3000>; wait-free-us = <50000>; @@ -154,7 +88,7 @@ cros_ec: embedded-controller { compatible = "google,cros-ec-i2c"; reg = <0x1e>; - interrupts = <6 0>; + interrupts = <6 IRQ_TYPE_NONE>; interrupt-parent = <&gpx1>; pinctrl-names = "default"; pinctrl-0 = <&ec_irq>; @@ -241,13 +175,6 @@ }; i2c@12CD0000 { - max98095: codec@11 { - compatible = "maxim,max98095"; - reg = <0x11>; - pinctrl-0 = <&max98095_en>; - pinctrl-names = "default"; - }; - ptn3460: lvds-bridge@20 { compatible = "nxp,ptn3460"; reg = <0x20>; @@ -258,10 +185,6 @@ }; }; - i2s0: i2s@03830000 { - status = "okay"; - }; - sound { compatible = "google,snow-audio-max98095"; @@ -275,20 +198,12 @@ regulator-name = "P5.0V_USB3CON"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpx2 7 0>; + gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb3_vbus_en>; enable-active-high; }; - phy@12100000 { - vbus-supply = <&usb3_vbus_reg>; - }; - - usb@12110000 { - samsung,vbus-gpio = <&gpx1 1 0>; - }; - fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -296,18 +211,6 @@ }; }; - hdmi { - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; - ddc = <&i2c_2>; - hdmi-en-supply = <&tps65090_fet7>; - vdd-supply = <&ldo8_reg>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; - }; - backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; @@ -319,30 +222,46 @@ pinctrl-names = "default"; }; - fimd@14400000 { - status = "okay"; - samsung,invert-vclk; - }; - panel: panel { compatible = "auo,b116xw03"; power-supply = <&fet6>; backlight = <&backlight>; }; +}; - dp-controller@145B0000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx0 7 0>; - bridge = <&ptn3460>; - }; +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; + bridge = <&ptn3460>; +}; + +&ehci { + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; }; &i2c_0 { @@ -350,10 +269,10 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - max77686@09 { + max77686: max77686@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; wakeup-source; @@ -503,7 +422,7 @@ trackpad { reg = <0x67>; compatible = "cypress,cyapa"; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; interrupt-parent = <&gpx1>; wakeup-source; }; @@ -550,6 +469,13 @@ status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + + max98095: codec@11 { + compatible = "maxim,max98095"; + reg = <0x11>; + pinctrl-0 = <&max98095_en>; + pinctrl-names = "default"; + }; }; &i2c_8 { @@ -563,6 +489,10 @@ }; }; +&i2s0 { + status = "okay"; +}; + &mmc_0 { status = "okay"; num-slots = <1>; @@ -587,7 +517,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; bus-width = <4>; - wp-gpios = <&gpc2 1 0>; + wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>; cap-sd-highspeed; }; @@ -610,12 +540,82 @@ }; &pinctrl_0 { + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + max98095_en: max98095-en { + samsung,pins = "gpx1-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb3_vbus_en: usb3-vbus-en { + samsung,pins = "gpx2-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + max77686_irq: max77686-irq { samsung,pins = "gpx3-2"; samsung,pin-function = <0>; samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + arb_their_claim: arb-their-claim { + samsung,pins = "gpe0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + arb_our_claim: arb-our-claim { + samsung,pins = "gpf0-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&sd3_bus4 { + samsung,pin-drv = <0>; +}; + +&sd3_clk { + samsung,pin-drv = <0>; +}; + +&sd3_cmd { + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; }; &spi_1 { @@ -624,4 +624,8 @@ num-cs = <1>; }; +&usbdrd_phy { + vbus-supply = <&usb3_vbus_reg>; +}; + #include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts new file mode 100644 index 000000000000..f5566f84d885 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -0,0 +1,536 @@ +/* + * Google Spring board device tree source + * + * Copyright (c) 2013 Google, Inc + * Copyright (c) 2014 SUSE LINUX Products GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include "exynos5250.dtsi" + +/ { + model = "Google Spring"; + compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=tty1"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq>, <&lid_irq>; + + power { + label = "Power"; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; + + usb-hub { + compatible = "smsc,usb3503a"; + reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <1>; + samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>; +}; + +&ehci { + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; + hdmi-en-supply = <&ldo8_reg>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + s5m8767-pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */ + <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */ + <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */ + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */ + <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */ + <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */ + + /* + * The following arrays of DVS voltages are not used, since we are + * not using GPIOs to control PMIC bucks, but they must be defined + * to please the driver. + */ + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", + "en32khz_cp", + "en32khz_bt"; + }; + + regulators { + ldo4_reg: LDO4 { + regulator-name = "P1.0V_LDO_OUT4"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo5_reg: LDO5 { + regulator-name = "P1.0V_LDO_OUT5"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_mydp"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo11_reg: LDO11 { + regulator-name = "P1.8V_LDO_OUT11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo13_reg: LDO13 { + regulator-name = "P1.8V_LDO_OUT13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo17_reg: LDO17 { + regulator-name = "P2.8V_LDO_OUT17"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo25_reg: LDO25 { + regulator-name = "vdd_bridge"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + op_mode = <3>; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.2V_BUCK_OUT6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <0>; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_ummc"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + }; + }; +}; + +&i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; +}; + +/* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ +&i2c2_bus { + samsung,pin-pud = <0>; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_4 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + cros_ec: embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx1>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; + }; +}; + +&i2c_5 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_7 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +/* + * On Spring we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ +&mmc_1 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&pinctrl_0 { + s5m8767_dvs: s5m8767-dvs { + samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp-hpd-gpio { + samsung,pins = "gpc3-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + s5m8767_ds: s5m8767-ds { + samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + s5m8767_irq: s5m8767-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lid_irq: lid-irq { + samsung,pins = "gpx3-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + hsic_reset: hsic-reset { + samsung,pins = "gpe1-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&sd1_bus4 { + samsung,pin-drv = <0>; +}; + +&sd1_cd { + samsung,pin-drv = <0>; +}; + +&sd1_clk { + samsung,pin-drv = <0>; +}; + +&sd1_cmd { + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; +}; + +&spi_1 { + status = "okay"; + samsung,spi-src-clk = <0>; + num-cs = <1>; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index f21b9aa00fbb..012b0211afed 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -218,7 +218,7 @@ clock-names = "fimg2d"; }; - codec@11000000 { + mfc: codec@11000000 { compatible = "samsung,mfc-v6"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; @@ -227,7 +227,7 @@ clock-names = "mfc"; }; - rtc@101E0000 { + rtc: rtc@101E0000 { clocks = <&clock CLK_RTC>; clock-names = "rtc"; status = "disabled"; @@ -261,7 +261,7 @@ clock-names = "uart", "clk_uart_baud0"; }; - sata@122F0000 { + sata: sata@122F0000 { compatible = "snps,dwc-ahci"; samsung,sata-freq = <66>; reg = <0x122F0000 0x1ff>; @@ -573,7 +573,7 @@ #phy-cells = <1>; }; - usb@12110000 { + ehci: usb@12110000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; interrupts = <0 71 0>; @@ -588,7 +588,7 @@ }; }; - usb@12120000 { + ohci: usb@12120000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12120000 0x100>; interrupts = <0 71 0>; @@ -710,7 +710,7 @@ clock-names = "gscl"; }; - hdmi { + hdmi: hdmi { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; @@ -736,14 +736,14 @@ #phy-cells = <0>; }; - dp-controller@145B0000 { + dp: dp-controller@145B0000 { clocks = <&clock CLK_DP>; clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; }; - fimd@14400000 { + fimd: fimd@14400000 { clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 82cdb74484cc..9a050e19a4dc 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -12,6 +12,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/maxim,max77802.h> #include "exynos5420.dtsi" / { @@ -151,7 +152,7 @@ status = "okay"; clock-frequency = <400000>; - max77802-pmic@9 { + max77802: max77802-pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&gpx3>; interrupts = <1 IRQ_TYPE_NONE>; @@ -560,7 +561,7 @@ status = "okay"; num-slots = <1>; broken-cd; - caps2-mmc-hs200-1_8v; + mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; card-detect-delay = <200>; @@ -727,6 +728,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; + clock-names = "rtc", "rtc_src"; }; &spi_2 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 7bb1c8dd42dd..e8fdda827fc9 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -12,6 +12,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/maxim,max77802.h> #include "exynos5800.dtsi" / { @@ -150,7 +151,7 @@ status = "okay"; clock-frequency = <400000>; - max77802-pmic@9 { + max77802: max77802-pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&gpx3>; interrupts = <1 IRQ_TYPE_NONE>; @@ -548,7 +549,7 @@ status = "okay"; num-slots = <1>; broken-cd; - caps2-mmc-hs200-1_8v; + mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; card-detect-delay = <200>; @@ -715,6 +716,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; + clock-names = "rtc", "rtc_src"; }; &spi_2 { diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 09664fcf5afb..0e13b4b10a92 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -193,7 +193,6 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; - clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 739fcf29c643..bc82a12d4c2c 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -668,6 +668,8 @@ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; + power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */ + reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */ gpmc,device-width = <2>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts index 2bcf69124a6a..84e05f713c54 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts @@ -94,6 +94,10 @@ voltage-tolerance = <1>; /* 1% */ }; +&cmt1 { + status = "okay"; +}; + &pfc { scifa0_pins: serial0 { renesas,groups = "scifa0_data"; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 5c75c918e9f5..7f57dc7f392a 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -109,6 +109,17 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; + + renesas,channels-mask = <0xff>; + status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 2703428557fc..98504e0b06c8 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -299,3 +299,7 @@ status = "okay"; }; + +&tmu0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index d46c213a17ad..aec8da89ef9a 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -71,6 +71,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_INTCA>; }; /* irqpin1: IRQ8 - IRQ15 */ @@ -91,6 +92,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_INTCA>; }; /* irqpin2: IRQ16 - IRQ23 */ @@ -111,6 +113,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_INTCA>; }; /* irqpin3: IRQ24 - IRQ31 */ @@ -131,6 +134,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_INTCA>; }; ether: ethernet@e9a00000 { @@ -193,7 +197,7 @@ compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c60000 0x100>; interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>; + clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>; clock-names = "sci_ick"; status = "disabled"; }; @@ -331,6 +335,34 @@ status = "disabled"; }; + tmu0: timer@fff80000 { + compatible = "renesas,tmu-r8a7740", "renesas,tmu"; + reg = <0xfff80000 0x2c>; + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, + <0 199 IRQ_TYPE_LEVEL_HIGH>, + <0 200 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_TMU0>; + clock-names = "fck"; + + #renesas,channels = <3>; + + status = "disabled"; + }; + + tmu1: timer@fff90000 { + compatible = "renesas,tmu-r8a7740", "renesas,tmu"; + reg = <0xfff90000 0x2c>; + interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>, + <0 171 IRQ_TYPE_LEVEL_HIGH>, + <0 172 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_TMU1>; + clock-names = "fck"; + + #renesas,channels = <3>; + + status = "disabled"; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -448,8 +480,8 @@ mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xe6150138 4>, <0xe6150040 4>; - clocks = <&sub_clk>, <&sub_clk>, - <&cpg_clocks R8A7740_CLK_HP>, + clocks = <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>, + <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>, <&cpg_clocks R8A7740_CLK_HP>, <&cpg_clocks R8A7740_CLK_HP>, <&cpg_clocks R8A7740_CLK_HP>, @@ -458,7 +490,8 @@ <&sub_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7740_CLK_SCIFA6 R8A7740_CLK_SCIFA7 + R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA + R8A7740_CLK_SCIFA7 R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2 R8A7740_CLK_DMAC3 R8A7740_CLK_USBDMAC R8A7740_CLK_SCIFA5 R8A7740_CLK_SCIFB @@ -467,7 +500,8 @@ R8A7740_CLK_SCIFA4 >; clock-output-names = - "scifa6", "scifa7", "dmac1", "dmac2", "dmac3", + "scifa6", "intca", + "scifa7", "dmac1", "dmac2", "dmac3", "usbdmac", "scifa5", "scifb", "scifa0", "scifa1", "scifa2", "scifa3", "scifa4"; }; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index fba294905ff4..04c0c37bb784 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -74,6 +74,10 @@ status = "okay"; }; +&tmu0 { + status = "okay"; +}; + &pfc { scif0_pins: serial0 { renesas,groups = "scif0_data_a", "scif0_ctrl"; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 99eeec2fa8a8..ef8533910029 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -162,6 +162,42 @@ status = "disabled"; }; + tmu0: timer@ffd80000 { + compatible = "renesas,tmu-r8a7778", "renesas,tmu"; + reg = <0xffd80000 0x30>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, + <0 33 IRQ_TYPE_LEVEL_HIGH>, + <0 34 IRQ_TYPE_LEVEL_HIGH>; + + #renesas,channels = <3>; + + status = "disabled"; + }; + + tmu1: timer@ffd81000 { + compatible = "renesas,tmu-r8a7778", "renesas,tmu"; + reg = <0xffd81000 0x30>; + interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>, + <0 37 IRQ_TYPE_LEVEL_HIGH>, + <0 38 IRQ_TYPE_LEVEL_HIGH>; + + #renesas,channels = <3>; + + status = "disabled"; + }; + + tmu2: timer@ffd82000 { + compatible = "renesas,tmu-r8a7778", "renesas,tmu"; + reg = <0xffd82000 0x30>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>, + <0 41 IRQ_TYPE_LEVEL_HIGH>, + <0 42 IRQ_TYPE_LEVEL_HIGH>; + + #renesas,channels = <3>; + + status = "disabled"; + }; + scif0: serial@ffe40000 { compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe40000 0x100>; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 9e1b859190ca..e83d40e24bcd 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -69,6 +69,78 @@ gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; }; }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + vga_enc_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + port@1 { + reg = <1>; + vga_enc_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&vga_enc_out>; + }; + }; + }; + + lvds-encoder { + compatible = "thine,thc63lvdm83d"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_enc_in: endpoint { + remote-endpoint = <&du_out_rgb1>; + }; + }; + port@1 { + reg = <1>; + lvds_connector: endpoint { + }; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&vga_enc_in>; + }; + }; + port@1 { + endpoint { + remote-endpoint = <&lvds_enc_in>; + }; + }; + }; }; &irqpin0 { @@ -84,6 +156,17 @@ }; &pfc { + du_pins: du { + du0 { + renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; + renesas,function = "du0"; + }; + du1 { + renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out"; + renesas,function = "du1"; + }; + }; + lan0_pins: lan0 { intc { renesas,groups = "intc_irq1_b"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index ad83e47ae199..ede9a29e4bc6 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -303,7 +303,7 @@ }; sata: sata@fc600000 { - compatible = "renesas,rcar-sata"; + compatible = "renesas,sata-r8a7779", "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; @@ -371,6 +371,30 @@ status = "disabled"; }; + du: display@fff80000 { + compatible = "renesas,du-r8a7779"; + reg = <0 0xfff80000 0 0x40000>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7779_CLK_DU>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb0: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_rgb1: endpoint { + }; + }; + }; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 854c13e3e6c0..830f2e87df49 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -19,8 +19,8 @@ compatible = "renesas,lager", "renesas,r8a7790"; aliases { - serial6 = &scif0; - serial7 = &scif1; + serial6 = &scifa0; + serial7 = &scifa1; }; chosen { @@ -145,6 +145,56 @@ states = <3300000 1 1800000 0>; }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + port@2 { + lvds_connector: endpoint { + }; + }; + }; }; &extal_clk { @@ -152,17 +202,14 @@ }; &pfc { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - du_pins: du { renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; renesas,function = "du"; }; - scif0_pins: serial0 { - renesas,groups = "scif0_data"; - renesas,function = "scif0"; + scifa0_pins: serial0 { + renesas,groups = "scifa0_data"; + renesas,function = "scifa0"; }; ether_pins: ether { @@ -175,9 +222,9 @@ renesas,function = "intc"; }; - scif1_pins: serial1 { - renesas,groups = "scif1_data"; - renesas,function = "scif1"; + scifa1_pins: serial1 { + renesas,groups = "scifa1_data"; + renesas,function = "scifa1"; }; sdhi0_pins: sd0 { @@ -221,6 +268,11 @@ renesas,function = "iic3"; }; + hsusb_pins: hsusb { + renesas,groups = "usb0_ovc_vbus"; + renesas,function = "usb0"; + }; + usb0_pins: usb0 { renesas,groups = "usb0"; renesas,function = "usb0"; @@ -309,15 +361,15 @@ }; }; -&scif0 { - pinctrl-0 = <&scif0_pins>; +&scifa0 { + pinctrl-0 = <&scifa0_pins>; pinctrl-names = "default"; status = "okay"; }; -&scif1 { - pinctrl-0 = <&scif1_pins>; +&scifa1 { + pinctrl-0 = <&scifa1_pins>; pinctrl-names = "default"; status = "okay"; @@ -419,12 +471,29 @@ pinctrl-names = "default"; }; +&xhci { + status = "okay"; + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; +}; + &pci2 { status = "okay"; pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; }; +&hsusb { + status = "okay"; + pinctrl-0 = <&hsusb_pins>; + pinctrl-names = "default"; + renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>; +}; + +&usbphy { + status = "okay"; +}; + /* composite video input */ &vin1 { pinctrl-0 = <&vin1_pins>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 77b7f767d16c..69b7cd0e7fb3 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -392,11 +392,13 @@ status = "disabled"; }; - mmcif0: mmcif@ee200000 { + mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; + dma-names = "tx", "rx"; reg-io-width = <4>; status = "disabled"; }; @@ -406,6 +408,8 @@ reg = <0 0xee220000 0 0x80>; interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; + dmas = <&dmac0 0xe1>, <&dmac0 0xe2>; + dma-names = "tx", "rx"; reg-io-width = <4>; status = "disabled"; }; @@ -564,6 +568,36 @@ status = "disabled"; }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7790"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7790"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + clock-names = "usbhs"; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7790"; clocks = <&mstp8_clks R8A7790_CLK_VIN0>; @@ -596,6 +630,96 @@ status = "disabled"; }; + vsp1@fe920000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe920000 0 0x8000>; + interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>; + + renesas,has-sru; + renesas,#rpf = <5>; + renesas,#uds = <1>; + renesas,#wpf = <4>; + }; + + vsp1@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; + + renesas,has-lut; + renesas,has-sru; + renesas,#rpf = <5>; + renesas,#uds = <3>; + renesas,#wpf = <4>; + }; + + vsp1@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>; + + renesas,has-lif; + renesas,has-lut; + renesas,#rpf = <4>; + renesas,#uds = <1>; + renesas,#wpf = <4>; + }; + + vsp1@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>; + + renesas,has-lif; + renesas,has-lut; + renesas,#rpf = <4>; + renesas,#uds = <1>; + renesas,#wpf = <4>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7790"; + reg = <0 0xfeb00000 0 0x70000>, + <0 0xfeb90000 0 0x1c>, + <0 0xfeb94000 0 0x1c>; + reg-names = "du", "lvds.0", "lvds.1"; + interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, + <0 268 IRQ_TYPE_LEVEL_HIGH>, + <0 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_DU0>, + <&mstp7_clks R8A7790_CLK_DU1>, + <&mstp7_clks R8A7790_CLK_DU2>, + <&mstp7_clks R8A7790_CLK_LVDS0>, + <&mstp7_clks R8A7790_CLK_LVDS1>; + clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_lvds1: endpoint { + }; + }; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -864,18 +988,25 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, - <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, - <&zs_clk>; + clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&m2_clk>, + <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>, <&zs_clk>, + <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_JPU R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 - R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 - R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S + R8A7790_CLK_VCP1 R8A7790_CLK_VCP0 R8A7790_CLK_VPC1 + R8A7790_CLK_VPC0 R8A7790_CLK_JPU R8A7790_CLK_SSP1 + R8A7790_CLK_TMU1 R8A7790_CLK_3DG R8A7790_CLK_2DDMAC + R8A7790_CLK_FDP1_2 R8A7790_CLK_FDP1_1 R8A7790_CLK_FDP1_0 + R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 + R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0 + R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = - "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", - "vsp1-du0", "vsp1-rt", "vsp1-sy"; + "vcp1", "vcp0", "vpc1", "vpc0", "jpu", "ssp1", + "tmu1", "3dg", "2ddmac", "fdp1-2", "fdp1-1", + "fdp1-0", "tmu3", "tmu2", "cmt0", "tmu0", + "vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1066,6 +1197,16 @@ status = "disabled"; }; + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7790"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; + pci0: pci@ee090000 { compatible = "renesas,pci-r8a7790"; device_type = "pci"; @@ -1084,6 +1225,20 @@ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; }; pci1: pci@ee0b0000 { @@ -1124,6 +1279,20 @@ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; }; pciec: pcie@fe000000 { diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 0868899882e3..740e38678032 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -272,6 +272,17 @@ pinctrl-names = "default"; }; +&hsusb { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; +}; + +&usbphy { + status = "okay"; +}; + &pcie_bus_clk { status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 9497cc2c51f1..191f32bc43ea 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -212,14 +212,24 @@ }; }; +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + ports { + port@1 { + lvds_connector: endpoint { + }; + }; + }; +}; + &extal_clk { clock-frequency = <20000000>; }; &pfc { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - i2c2_pins: i2c2 { renesas,groups = "i2c2"; renesas,function = "i2c2"; @@ -464,6 +474,17 @@ pinctrl-names = "default"; }; +&hsusb { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; +}; + +&usbphy { + status = "okay"; +}; + &pcie_bus_clk { status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 35b8a7505a3b..9a57215f54f7 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for the r8a7791 SoC * - * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013-2014 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded Inc. * @@ -400,6 +400,17 @@ #gpio-range-cells = <3>; }; + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; + dma-names = "tx", "rx"; + reg-io-width = <4>; + status = "disabled"; + }; + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee100000 0 0x200>; @@ -613,6 +624,36 @@ status = "disabled"; }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7791"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7791"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; + clock-names = "usbhs"; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7791"; clocks = <&mstp8_clks R8A7791_CLK_VIN0>; @@ -637,6 +678,75 @@ status = "disabled"; }; + vsp1@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>; + + renesas,has-lut; + renesas,has-sru; + renesas,#rpf = <5>; + renesas,#uds = <3>; + renesas,#wpf = <4>; + }; + + vsp1@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>; + + renesas,has-lif; + renesas,has-lut; + renesas,#rpf = <4>; + renesas,#uds = <1>; + renesas,#wpf = <4>; + }; + + vsp1@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>; + + renesas,has-lif; + renesas,has-lut; + renesas,#rpf = <4>; + renesas,#uds = <1>; + renesas,#wpf = <4>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7791"; + reg = <0 0xfeb00000 0 0x40000>, + <0 0xfeb90000 0 0x1c>; + reg-names = "du", "lvds.0"; + interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, + <0 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_DU0>, + <&mstp7_clks R8A7791_CLK_DU1>, + <&mstp7_clks R8A7791_CLK_LVDS0>; + clock-names = "du.0", "du.1", "lvds.0"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -889,17 +999,23 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, - <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; + clocks = <&zs_clk>, <&zs_clk>, <&m2_clk>, <&zs_clk>, <&p_clk>, + <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, + <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, + <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_JPU R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 - R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 - R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S + R8A7791_CLK_VCP0 R8A7791_CLK_VPC0 R8A7791_CLK_JPU + R8A7791_CLK_SSP1 R8A7791_CLK_TMU1 R8A7791_CLK_3DG + R8A7791_CLK_2DDMAC R8A7791_CLK_FDP1_1 R8A7791_CLK_FDP1_0 + R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 + R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0 + R8A7791_CLK_VSP1_S >; clock-output-names = - "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", - "vsp1-du0", "vsp1-sy"; + "vcp0", "vpc0", "jpu", "ssp1", "tmu1", "3dg", + "2ddmac", "fdp1-1", "fdp1-0", "tmu3", "tmu2", "cmt0", + "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1088,6 +1204,16 @@ status = "disabled"; }; + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7791"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; + pci0: pci@ee090000 { compatible = "renesas,pci-r8a7791"; device_type = "pci"; @@ -1106,6 +1232,20 @@ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; }; pci1: pci@ee0d0000 { @@ -1126,6 +1266,20 @@ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; }; pciec: pcie@fe000000 { diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index d4e8bce1e0b7..088e79c6551c 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -82,6 +82,14 @@ status = "disabled"; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + irqc0: interrupt-controller@e61c0000 { compatible = "renesas,irqc-r8a7794", "renesas,irqc"; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi new file mode 100644 index 000000000000..65cb50f0c29f --- /dev/null +++ b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi @@ -0,0 +1,41 @@ +/* + * Common file for the AA104XD12 panel connected to Renesas R-Car boards + * + * Copyright (C) 2014 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + panel { + compatible = "mitsubishi,aa104xd12", "panel-dpi"; + + width-mm = <210>; + height-mm = <158>; + + panel-timing { + /* 1024x768 @65Hz */ + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hsync-len = <136>; + hfront-porch = <20>; + hback-porch = <160>; + vfront-porch = <3>; + vback-porch = <29>; + vsync-len = <6>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_connector>; + }; + }; + }; +}; + +&lvds_connector { + remote-endpoint = <&panel_in>; +}; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index d5344510c676..baf21ac6ce7f 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -60,6 +60,10 @@ }; }; +&cpu0 { + cpu0-supply = <&vdd_arm>; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index ad9c2db59670..0e99470db772 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -26,11 +26,21 @@ #size-cells = <0>; enable-method = "rockchip,rk3066-smp"; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; + operating-points = < + /* kHz uV */ + 1008000 1075000 + 816000 1025000 + 600000 1025000 + 504000 1000000 + 312000 975000 + >; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu@1 { device_type = "cpu"; @@ -53,6 +63,51 @@ }; }; + i2s0: i2s@10118000 { + compatible = "rockchip,rk3066-i2s"; + reg = <0x10118000 0x2000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + dmas = <&dmac1_s 4>, <&dmac1_s 5>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + status = "disabled"; + }; + + i2s1: i2s@1011a000 { + compatible = "rockchip,rk3066-i2s"; + reg = <0x1011a000 0x2000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + dmas = <&dmac1_s 6>, <&dmac1_s 7>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>; + status = "disabled"; + }; + + i2s2: i2s@1011c000 { + compatible = "rockchip,rk3066-i2s"; + reg = <0x1011c000 0x2000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + dmas = <&dmac1_s 9>, <&dmac1_s 10>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>; + status = "disabled"; + }; + cru: clock-controller@20000000 { compatible = "rockchip,rk3066a-cru"; reg = <0x20000000 0x1000>; @@ -405,6 +460,42 @@ <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>; }; }; + + i2s0 { + i2s0_bus: i2s0-bus { + rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>; + }; + }; + + i2s1 { + i2s1_bus: i2s1-bus { + rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>; + }; + }; + + i2s2 { + i2s2_bus: i2s2-bus { + rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 15910c9ddbc7..0950a0524947 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -118,6 +118,10 @@ }; }; +&cpu0 { + cpu0-supply = <&vdd_arm>; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -159,7 +163,7 @@ vdd_arm: REG3 { regulator-name = "VDD_ARM"; regulator-min-microvolt = <875000>; - regulator-max-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; regulator-always-on; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ddaada788b45..b24e04f6ccc7 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -26,11 +26,24 @@ #size-cells = <0>; enable-method = "rockchip,rk3066-smp"; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; + operating-points = < + /* kHz uV */ + 1608000 1350000 + 1416000 1250000 + 1200000 1150000 + 1008000 1075000 + 816000 975000 + 600000 950000 + 504000 925000 + 312000 875000 + >; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu@1 { device_type = "cpu"; @@ -65,6 +78,21 @@ }; }; + i2s0: i2s@1011a000 { + compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s"; + reg = <0x1011a000 0x2000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + dmas = <&dmac1_s 6>, <&dmac1_s 7>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + status = "disabled"; + }; + cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>; @@ -395,6 +423,17 @@ <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>; }; }; + + i2s0 { + i2s0_bus: i2s0-bus { + rockchip,pins = <RK_GPIO1 16 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 17 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 18 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 19 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 20 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index ff522f8e3df4..d8c775e6d5fe 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -17,6 +17,10 @@ compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; }; +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + &i2c0 { clock-frequency = <400000>; status = "okay"; @@ -44,7 +48,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; regulator-name = "vdd_arm"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 874e66dbb93b..cfc43789cac6 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -47,10 +47,27 @@ #address-cells = <1>; #size-cells = <0>; - cpu@500 { + cpu0: cpu@500 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x500>; + operating-points = < + /* KHz uV */ + 1608000 1350000 + 1512000 1300000 + 1416000 1200000 + 1200000 1100000 + 1008000 1050000 + 816000 1000000 + 696000 950000 + 600000 900000 + 408000 900000 + 312000 900000 + 216000 900000 + 126000 900000 + >; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu@501 { device_type = "cpu"; @@ -177,6 +194,8 @@ compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac_peri 11>, <&dmac_peri 12>; + dma-names = "tx", "rx"; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; @@ -190,6 +209,8 @@ compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac_peri 13>, <&dmac_peri 14>; + dma-names = "tx", "rx"; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; @@ -203,6 +224,8 @@ compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac_peri 15>, <&dmac_peri 16>; + dma-names = "tx", "rx"; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; @@ -455,6 +478,16 @@ rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; + assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru PLL_NPLL>, <&cru ACLK_CPU>, + <&cru HCLK_CPU>, <&cru PCLK_CPU>, + <&cru ACLK_PERI>, <&cru HCLK_PERI>, + <&cru PCLK_PERI>; + assigned-clock-rates = <594000000>, <400000000>, + <500000000>, <300000000>, + <150000000>, <75000000>, + <300000000>, <150000000>, + <75000000>; }; grf: syscon@ff770000 { diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 499468d42ada..9ba92de511ca 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -367,6 +367,8 @@ reg = <0x20070000 0x1000>; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmac2 10>, <&dmac2 11>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -378,6 +380,8 @@ reg = <0x20074000 0x1000>; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmac2 12>, <&dmac2 13>; + dma-names = "tx", "rx"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 57e00f9bce99..a25debb50401 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -198,10 +198,6 @@ status = "okay"; }; -&pwm { - status = "okay"; -}; - &pinctrl0 { gpio_leds: gpio-leds { samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7"; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index ff5bdaac987a..0ccb414cd268 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -172,7 +172,6 @@ clocks = <&clocks PCLK_PWM>; samsung,pwm-outputs = <0>, <1>; #pwm-cells = <3>; - status = "disabled"; }; pinctrl0: pinctrl@7f008000 { diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 45fce2cf6fed..4472fd92685c 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -547,7 +547,7 @@ status = "disabled"; }; - gpio@ff708000 { + gpio0: gpio@ff708000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dw-apb-gpio"; @@ -555,7 +555,7 @@ clocks = <&per_base_clk>; status = "disabled"; - gpio0: gpio-controller@0 { + porta: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; @@ -567,7 +567,7 @@ }; }; - gpio@ff709000 { + gpio1: gpio@ff709000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dw-apb-gpio"; @@ -575,7 +575,7 @@ clocks = <&per_base_clk>; status = "disabled"; - gpio1: gpio-controller@0 { + portb: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; @@ -587,7 +587,7 @@ }; }; - gpio@ff70a000 { + gpio2: gpio@ff70a000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dw-apb-gpio"; @@ -595,7 +595,7 @@ clocks = <&per_base_clk>; status = "disabled"; - gpio2: gpio-controller@0 { + portc: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 03e8268ae219..1907cc600452 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -29,7 +29,7 @@ }; }; - dwmmc0@ff704000 { + mmc0: dwmmc0@ff704000 { num-slots = <1>; broken-cd; bus-width = <4>; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index 27d551c384d0..ccaf41742fc3 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -37,6 +37,13 @@ */ ethernet0 = &gmac1; }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &gmac1 { @@ -68,6 +75,11 @@ }; }; +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index d7296a5f750c..258865da8f6a 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -37,6 +37,13 @@ */ ethernet0 = &gmac1; }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &gmac1 { @@ -53,6 +60,10 @@ rxc-skew-ps = <2000>; }; +&gpio1 { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -69,7 +80,9 @@ }; &mmc0 { - cd-gpios = <&gpio1 18 0>; + cd-gpios = <&portb 18 0>; + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; }; &usb1 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index d26f155f5fd9..16ea6f5f2ab8 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -37,6 +37,13 @@ */ ethernet0 = &gmac1; }; + + regulator_3_3v: vcc3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &gmac1 { @@ -53,6 +60,11 @@ rxc-skew-ps = <2000>; }; +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts new file mode 100644 index 000000000000..a8c00ee7522a --- /dev/null +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -0,0 +1,151 @@ +/* + * Device Tree for the ST-Ericsson Nomadik S8815 board + * Produced by Calao Systems + */ + +/dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "ste-nomadik-stn8815.dtsi" + +/ { + model = "Nomadik STN8815NHK"; + compatible = "st,nomadik-nhk-15"; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; + }; + + aliases { + stmpe-i2c0 = &stmpe0; + stmpe-i2c1 = &stmpe1; + }; + + pinctrl { + stmpe2401_1 { + stmpe2401_1_nhk_mode: stmpe2401_1_nhk { + nhk_cfg1 { + ste,pins = "GPIO76_B20"; // IRQ line + ste,input = <0>; + }; + nhk_cfg2 { + ste,pins = "GPIO77_B8"; // reset line + ste,output = <1>; + }; + }; + }; + stmpe2401_2 { + stmpe2401_2_nhk_mode: stmpe2401_2_nhk { + nhk_cfg1 { + ste,pins = "GPIO78_A8"; // IRQ line + ste,input = <0>; + }; + nhk_cfg2 { + ste,pins = "GPIO79_C9"; // reset line + ste,output = <1>; + }; + }; + }; + }; + + src@101e0000 { + /* These chrystal outputs are not used on this board */ + disable-sxtalo; + disable-mxtalo; + }; + + /* This is where the interrupt is routed on the NHK-15 debug board */ + external-bus@34000000 { + compatible = "simple-bus"; + reg = <0x34000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x34000000 0x1000000>; + ethernet@300 { + compatible = "smsc,lan91c111"; + reg = <0x300 0x0fd00>; + reg-io-width = <2>; + reset-gpios = <&stmpe_gpio44 10 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&stmpe_gpio44>; + interrupts = <11 IRQ_TYPE_EDGE_RISING>; + }; + }; + + i2c0 { + stmpe0: stmpe2401@43 { + compatible = "st,stmpe2401"; + reg = <0x43>; + reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; // GPIO77 + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; // GPIO76 + interrupt-parent = <&gpio2>; + interrupt-controller; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&stmpe2401_1_nhk_mode>; + stmpe_gpio43: stmpe_gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + /* Some pins in alternate functions */ + st,norequest-mask = <0xf0f002>; + }; + stmpe_keypad { + compatible = "st,stmpe-keypad"; + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x00020072 // Vol down + 0x00030073 // Vol up + 0x0100009e // Back + 0x010100e3 // TV out + 0x01020098 // Lock + 0x0103013b // Start + 0x020000a3 // Next + 0x020100a4 // Play + 0x020200a5 // Prev + 0x02030160 // OK + 0x03000069 // Left + 0x0301006a // Right + 0x03020067 // Up + 0x0303006c>; // Down + }; + }; + stmpe1: stmpe2401@44 { + compatible = "st,stmpe2401"; + reg = <0x44>; + reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; // GPIO79 + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; // GPIO78 + interrupt-parent = <&gpio2>; + interrupt-controller; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&stmpe2401_2_nhk_mode>; + stmpe_gpio44: stmpe_gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + + amba { + mmcsd: sdi@101f6000 { + cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>; + }; + }; + + /* Custom board node with GPIO pins to active etc */ + usb-s8815 { + /* This will turn off SATA so that MMC/SD can thrive */ + mmcsd-gpio { + gpios = <&stmpe_gpio44 2 0x1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 90d8b6c7a205..e411ff7769fe 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -4,6 +4,7 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> #include "ste-nomadik-stn8815.dtsi" / { @@ -14,14 +15,6 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; - /* This is where the interrupt is routed on the S8815 board */ - external-bus@34000000 { - ethernet@300 { - interrupt-parent = <&gpio3>; - interrupts = <8 0x1>; - }; - }; - src@101e0000 { /* These chrystal drivers are not used on this board */ disable-sxtalo; @@ -47,6 +40,14 @@ }; }; }; + gpioi2c { + gpioi2c_default_mode: gpioi2c_default { + gpioi2c_default_cfg { + ste,pins = "GPIO73_C21", "GPIO74_C20"; + ste,input = <0>; + }; + }; + }; user-led { user_led_default_mode: user_led_default { user_led_default_cfg { @@ -65,6 +66,45 @@ }; }; + /* Ethernet */ + external-bus@34000000 { + compatible = "simple-bus"; + reg = <0x34000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x34000000 0x1000000>; + ethernet@300 { + compatible = "smsc,lan91c111"; + reg = <0x300 0x0fd00>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + }; + }; + + /* GPIO I2C connected to the USB portions of the STw4811 only */ + gpio-i2c { + compatible = "i2c-gpio"; + gpios = <&gpio2 10 0>, /* sda */ + <&gpio2 9 0>; /* scl */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&gpioi2c_default_mode>; + + stw4811@2d { + compatible = "st,stw4811-usb"; + reg = <0x2d>; + }; + }; + + + /* Configure card detect for the uSD slot */ + amba { + mmcsd: sdi@101f6000 { + cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* This will bias the MMC/SD card detect line */ diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index dbcf521b017f..f435ff20aefe 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -117,7 +117,7 @@ mmcsd_default_mux: mmcsd_mux { mmcsd_default_mux { ste,function = "mmcsd"; - ste,pins = "mmcsd_a_1"; + ste,pins = "mmcsd_a_1", "mmcsd_b_1"; }; }; mmcsd_default_mode: mmcsd_default { @@ -127,9 +127,9 @@ ste,output = <0>; }; mmcsd_default_cfg2 { - /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */ + /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */ ste,pins = "GPIO10_C11", "GPIO15_A12", - "GPIO16_C13"; + "GPIO16_C13", "GPIO23_D15"; ste,output = <1>; }; mmcsd_default_cfg3 { @@ -169,21 +169,11 @@ }; }; }; - i2c2 { - i2c2_default_mode: i2c2_default { - i2c2_default_cfg { - ste,pins = "GPIO73_C21", "GPIO74_C20"; - ste,input = <0>; - }; - }; - }; }; src: src@101e0000 { compatible = "stericsson,nomadik-src"; reg = <0x101e0000 0x1000>; - disable-sxtalo; - disable-mxtalo; /* * MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz @@ -683,18 +673,6 @@ }; }; - external-bus@34000000 { - compatible = "simple-bus"; - reg = <0x34000000 0x1000000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x34000000 0x1000000>; - ethernet@300 { - compatible = "smsc,lan91c111"; - reg = <0x300 0x0fd00>; - }; - }; - /* I2C0 connected to the STw4811 power management chip */ i2c0 { compatible = "st,nomadik-i2c", "arm,primecell"; @@ -749,22 +727,6 @@ }; }; - /* I2C2 connected to the USB portions of the STw4811 only */ - i2c2 { - compatible = "i2c-gpio"; - gpios = <&gpio2 10 0>, /* sda */ - <&gpio2 9 0>; /* scl */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_default_mode>; - - stw4811@2d { - compatible = "st,stw4811-usb"; - reg = <0x2d>; - }; - }; - amba { compatible = "arm,amba-bus"; #address-cells = <1>; @@ -844,7 +806,6 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; - cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index 800f46f009f3..e65744fc12ab 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -5,8 +5,13 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <dt-bindings/clock/stih407-clks.h> / { clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + /* * Fixed 30MHz oscillator inputs to SoC */ @@ -19,10 +24,59 @@ /* * ARM Peripheral clock for timers */ - arm_periph_clk: arm-periph-clk { + arm_periph_clk: clk-m-a9-periphs { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <600000000>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; + }; + + /* + * A9 PLL. + */ + clockgen-a9@92b0000 { + compatible = "st,clkgen-c32"; + reg = <0x92b0000 0xffff>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks. + */ + clk_m_a9: clk-m-a9@92b0000 { + #clock-cells = <0>; + compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0x92b0000 0x10000>; + + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_s_c0_flexgen 13>, + <&clk_m_a9_ext2f_div2>; + }; + + /* + * ARM Peripheral clock for timers + */ + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_s_c0_flexgen 13>; + + clock-output-names = "clk-m-a9-ext2f-div2"; + + clock-div = <2>; + clock-mult = <1>; }; /* @@ -35,5 +89,238 @@ clock-frequency = <200000000>; clock-output-names = "clk-s-icn-reg-0"; }; + + clockgen-a@090ff000 { + compatible = "st,clkgen-c32"; + reg = <0x90ff000 0x1000>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll-ofd-0"; + }; + + clk_s_a0_flexgen: clk-s-a0-flexgen { + compatible = "st,flexgen"; + + #clock-cells = <1>; + + clocks = <&clk_s_a0_pll 0>, + <&clk_sysin>; + + clock-output-names = "clk-ic-lmi0"; + }; + }; + + clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-C", "st,quadfs"; + reg = <0x9103000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-fs0-ch0", + "clk-s-c0-fs0-ch1", + "clk-s-c0-fs0-ch2", + "clk-s-c0-fs0-ch3"; + }; + + clk_s_c0: clockgen-c@09103000 { + compatible = "st,clkgen-c32"; + reg = <0x9103000 0x1000>; + + clk_s_c0_pll0: clk-s-c0-pll0 { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-pll0-odf-0"; + }; + + clk_s_c0_pll1: clk-s-c0-pll1 { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-pll1-odf-0"; + }; + + clk_s_c0_flexgen: clk-s-c0-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_c0_pll0 0>, + <&clk_s_c0_pll1 0>, + <&clk_s_c0_quadfs 0>, + <&clk_s_c0_quadfs 1>, + <&clk_s_c0_quadfs 2>, + <&clk_s_c0_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-icn-gpu", + "clk-fdma", + "clk-nand", + "clk-hva", + "clk-proc-stfe", + "clk-proc-tp", + "clk-rx-icn-dmu", + "clk-rx-icn-hva", + "clk-icn-cpu", + "clk-tx-icn-dmu", + "clk-mmc-0", + "clk-mmc-1", + "clk-jpegdec", + "clk-ext2fa9", + "clk-ic-bdisp-0", + "clk-ic-bdisp-1", + "clk-pp-dmu", + "clk-vid-dmu", + "clk-dss-lpc", + "clk-st231-aud-0", + "clk-st231-gp-1", + "clk-st231-dmu", + "clk-icn-lmi", + "clk-tx-icn-disp-1", + "clk-icn-sbc", + "clk-stfe-frc2", + "clk-eth-phy", + "clk-eth-ref-phyclk", + "clk-flash-promip", + "clk-main-disp", + "clk-aux-disp", + "clk-compo-dvp"; + }; + }; + + clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9104000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d0-fs0-ch0", + "clk-s-d0-fs0-ch1", + "clk-s-d0-fs0-ch2", + "clk-s-d0-fs0-ch3"; + }; + + clockgen-d0@09104000 { + compatible = "st,clkgen-c32"; + reg = <0x9104000 0x1000>; + + clk_s_d0_flexgen: clk-s-d0-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d0_quadfs 0>, + <&clk_s_d0_quadfs 1>, + <&clk_s_d0_quadfs 2>, + <&clk_s_d0_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-pcm-0", + "clk-pcm-1", + "clk-pcm-2", + "clk-spdiff"; + }; + }; + + clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9106000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d2-fs0-ch0", + "clk-s-d2-fs0-ch1", + "clk-s-d2-fs0-ch2", + "clk-s-d2-fs0-ch3"; + }; + + clk_tmdsout_hdmi: clk-tmdsout-hdmi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + clockgen-d2@x9106000 { + compatible = "st,clkgen-c32"; + reg = <0x9106000 0x1000>; + + clk_s_d2_flexgen: clk-s-d2-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>, + <&clk_s_d2_quadfs 2>, + <&clk_s_d2_quadfs 3>, + <&clk_sysin>, + <&clk_sysin>, + <&clk_tmdsout_hdmi>; + + clock-output-names = "clk-pix-main-disp", + "clk-pix-pip", + "clk-pix-gdp1", + "clk-pix-gdp2", + "clk-pix-gdp3", + "clk-pix-gdp4", + "clk-pix-aux-disp", + "clk-denc", + "clk-pix-hddac", + "clk-hddac", + "clk-sddac", + "clk-pix-dvo", + "clk-dvo", + "clk-pix-hdmi", + "clk-tmds-hdmi", + "clk-ref-hdmiphy"; + }; + }; + + clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9107000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d3-fs0-ch0", + "clk-s-d3-fs0-ch1", + "clk-s-d3-fs0-ch2", + "clk-s-d3-fs0-ch3"; + }; + + clockgen-d3@9107000 { + compatible = "st,clkgen-c32"; + reg = <0x9107000 0x1000>; + + clk_s_d3_flexgen: clk-s-d3-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d3_quadfs 0>, + <&clk_s_d3_quadfs 1>, + <&clk_s_d3_quadfs 2>, + <&clk_s_d3_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-stfe-frc1", + "clk-tsout-0", + "clk-tsout-1", + "clk-mchi", + "clk-vsens-compo", + "clk-frc1-remote", + "clk-lpc-0", + "clk-lpc-1"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 4f9024f19866..50637f5168d4 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -8,6 +8,7 @@ */ #include "stih407-clock.dtsi" #include "stih407-pinctrl.dtsi" +#include <dt-bindings/reset-controller/stih407-resets.h> / { #address-cells = <1>; #size-cells = <1>; @@ -63,6 +64,21 @@ ranges; compatible = "simple-bus"; + powerdown: powerdown-controller { + compatible = "st,stih407-powerdown"; + #reset-cells = <1>; + }; + + softreset: softreset-controller { + compatible = "st,stih407-softreset"; + #reset-cells = <1>; + }; + + picophyreset: picophyreset-controller { + compatible = "st,stih407-picophyreset"; + #reset-cells = <1>; + }; + syscfg_sbc: sbc-syscfg@9620000 { compatible = "st,stih407-sbc-syscfg", "syscon"; reg = <0x9620000 0x1000>; @@ -104,7 +120,7 @@ interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial0>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; status = "disabled"; }; @@ -115,7 +131,7 @@ interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial1>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; status = "disabled"; }; @@ -126,7 +142,7 @@ interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; status = "disabled"; }; @@ -158,7 +174,7 @@ compatible = "st,comms-ssc4-i2c"; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; reg = <0x9840000 0x110>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -171,7 +187,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0x9841000 0x110>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -184,7 +200,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0x9842000 0x110>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -197,7 +213,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0x9843000 0x110>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -210,7 +226,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0x9844000 0x110>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -223,7 +239,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0x9845000 0x110>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index 8509a037ae21..3791ad95dbaf 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -11,33 +11,33 @@ / { aliases { - gpio0 = &PIO0; - gpio1 = &PIO1; - gpio2 = &PIO2; - gpio3 = &PIO3; - gpio4 = &PIO4; - gpio5 = &PIO5; - gpio6 = &PIO6; - gpio7 = &PIO7; - gpio8 = &PIO8; - gpio9 = &PIO9; - gpio10 = &PIO10; - gpio11 = &PIO11; - gpio12 = &PIO12; - gpio13 = &PIO13; - gpio14 = &PIO14; - gpio15 = &PIO15; - gpio16 = &PIO16; - gpio17 = &PIO17; - gpio18 = &PIO18; - gpio19 = &PIO100; - gpio20 = &PIO101; - gpio21 = &PIO102; - gpio22 = &PIO103; - gpio23 = &PIO104; - gpio24 = &PIO105; - gpio25 = &PIO106; - gpio26 = &PIO107; + gpio0 = &pio0; + gpio1 = &pio1; + gpio2 = &pio2; + gpio3 = &pio3; + gpio4 = &pio4; + gpio5 = &pio5; + gpio6 = &pio6; + gpio7 = &pio7; + gpio8 = &pio8; + gpio9 = &pio9; + gpio10 = &pio10; + gpio11 = &pio11; + gpio12 = &pio12; + gpio13 = &pio13; + gpio14 = &pio14; + gpio15 = &pio15; + gpio16 = &pio16; + gpio17 = &pio17; + gpio18 = &pio18; + gpio19 = &pio100; + gpio20 = &pio101; + gpio21 = &pio102; + gpio22 = &pio103; + gpio23 = &pio104; + gpio24 = &pio105; + gpio25 = &pio106; + gpio26 = &pio107; }; soc { @@ -52,7 +52,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x5000>; - PIO0: gpio@fe610000 { + pio0: gpio@fe610000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -60,7 +60,7 @@ reg = <0 0x100>; st,bank-name = "PIO0"; }; - PIO1: gpio@fe611000 { + pio1: gpio@fe611000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -68,7 +68,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO1"; }; - PIO2: gpio@fe612000 { + pio2: gpio@fe612000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -76,7 +76,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO2"; }; - PIO3: gpio@fe613000 { + pio3: gpio@fe613000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -84,7 +84,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO3"; }; - PIO4: gpio@fe614000 { + pio4: gpio@fe614000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -96,8 +96,8 @@ sbc_serial1 { pinctrl_sbc_serial1:sbc_serial1 { st,pins { - tx = <&PIO2 6 ALT3 OUT>; - rx = <&PIO2 7 ALT3 IN>; + tx = <&pio2 6 ALT3 OUT>; + rx = <&pio2 7 ALT3 IN>; }; }; }; @@ -105,15 +105,15 @@ keyscan { pinctrl_keyscan: keyscan { st,pins { - keyin0 = <&PIO0 2 ALT2 IN>; - keyin1 = <&PIO0 3 ALT2 IN>; - keyin2 = <&PIO0 4 ALT2 IN>; - keyin3 = <&PIO2 6 ALT2 IN>; - - keyout0 = <&PIO1 6 ALT2 OUT>; - keyout1 = <&PIO1 7 ALT2 OUT>; - keyout2 = <&PIO0 6 ALT2 OUT>; - keyout3 = <&PIO2 7 ALT2 OUT>; + keyin0 = <&pio0 2 ALT2 IN>; + keyin1 = <&pio0 3 ALT2 IN>; + keyin2 = <&pio0 4 ALT2 IN>; + keyin3 = <&pio2 6 ALT2 IN>; + + keyout0 = <&pio1 6 ALT2 OUT>; + keyout1 = <&pio1 7 ALT2 OUT>; + keyout2 = <&pio0 6 ALT2 OUT>; + keyout3 = <&pio2 7 ALT2 OUT>; }; }; }; @@ -121,8 +121,8 @@ sbc_i2c0 { pinctrl_sbc_i2c0_default: sbc_i2c0-default { st,pins { - sda = <&PIO4 6 ALT1 BIDIR>; - scl = <&PIO4 5 ALT1 BIDIR>; + sda = <&pio4 6 ALT1 BIDIR>; + scl = <&pio4 5 ALT1 BIDIR>; }; }; }; @@ -130,8 +130,8 @@ sbc_i2c1 { pinctrl_sbc_i2c1_default: sbc_i2c1-default { st,pins { - sda = <&PIO3 2 ALT2 BIDIR>; - scl = <&PIO3 1 ALT2 BIDIR>; + sda = <&pio3 2 ALT2 BIDIR>; + scl = <&pio3 1 ALT2 BIDIR>; }; }; }; @@ -139,7 +139,7 @@ rc{ pinctrl_ir: ir0 { st,pins { - ir = <&PIO4 0 ALT2 IN>; + ir = <&pio4 0 ALT2 IN>; }; }; }; @@ -147,49 +147,49 @@ gmac1 { pinctrl_mii1: mii1 { st,pins { - txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; - col = <&PIO0 7 ALT1 IN BYPASS 1000>; - mdio = <&PIO1 0 ALT1 OUT BYPASS 0>; - mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; - crs = <&PIO1 2 ALT1 IN BYPASS 1000>; - mdint = <&PIO1 3 ALT1 IN BYPASS 0>; - rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&PIO2 3 ALT1 IN NICLK 1000 CLK_A>; + txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + col = <&pio0 7 ALT1 IN BYPASS 1000>; + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + crs = <&pio1 2 ALT1 IN BYPASS 1000>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT1 IN NICLK 1000 CLK_A>; }; }; pinctrl_rgmii1: rgmii1-0 { st,pins { - txd0 = <&PIO0 0 ALT1 OUT DE_IO 1000 CLK_A>; - txd1 = <&PIO0 1 ALT1 OUT DE_IO 1000 CLK_A>; - txd2 = <&PIO0 2 ALT1 OUT DE_IO 1000 CLK_A>; - txd3 = <&PIO0 3 ALT1 OUT DE_IO 1000 CLK_A>; - txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>; - txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; - mdio = <&PIO1 0 ALT1 OUT BYPASS 0>; - mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; - rxd0 = <&PIO1 4 ALT1 IN DE_IO 0 CLK_A>; - rxd1 = <&PIO1 5 ALT1 IN DE_IO 0 CLK_A>; - rxd2 = <&PIO1 6 ALT1 IN DE_IO 0 CLK_A>; - rxd3 = <&PIO1 7 ALT1 IN DE_IO 0 CLK_A>; - - rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>; - rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>; - - clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>; + txd0 = <&pio0 0 ALT1 OUT DE_IO 1000 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT DE_IO 1000 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT DE_IO 1000 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT DE_IO 1000 CLK_A>; + txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; + + rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>; + + clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>; }; }; }; @@ -206,7 +206,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfee00000 0x8000>; - PIO5: gpio@fee00000 { + pio5: gpio@fee00000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -214,7 +214,7 @@ reg = <0 0x100>; st,bank-name = "PIO5"; }; - PIO6: gpio@fee01000 { + pio6: gpio@fee01000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -222,7 +222,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO6"; }; - PIO7: gpio@fee02000 { + pio7: gpio@fee02000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -230,7 +230,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO7"; }; - PIO8: gpio@fee03000 { + pio8: gpio@fee03000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -238,7 +238,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO8"; }; - PIO9: gpio@fee04000 { + pio9: gpio@fee04000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -246,7 +246,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO9"; }; - PIO10: gpio@fee05000 { + pio10: gpio@fee05000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -254,7 +254,7 @@ reg = <0x5000 0x100>; st,bank-name = "PIO10"; }; - PIO11: gpio@fee06000 { + pio11: gpio@fee06000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -262,7 +262,7 @@ reg = <0x6000 0x100>; st,bank-name = "PIO11"; }; - PIO12: gpio@fee07000 { + pio12: gpio@fee07000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -274,8 +274,8 @@ i2c0 { pinctrl_i2c0_default: i2c0-default { st,pins { - sda = <&PIO9 3 ALT1 BIDIR>; - scl = <&PIO9 2 ALT1 BIDIR>; + sda = <&pio9 3 ALT1 BIDIR>; + scl = <&pio9 2 ALT1 BIDIR>; }; }; }; @@ -283,8 +283,8 @@ i2c1 { pinctrl_i2c1_default: i2c1-default { st,pins { - sda = <&PIO12 1 ALT1 BIDIR>; - scl = <&PIO12 0 ALT1 BIDIR>; + sda = <&pio12 1 ALT1 BIDIR>; + scl = <&pio12 0 ALT1 BIDIR>; }; }; }; @@ -301,7 +301,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfe820000 0x8000>; - PIO13: gpio@fe820000 { + pio13: gpio@fe820000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -309,7 +309,7 @@ reg = <0 0x100>; st,bank-name = "PIO13"; }; - PIO14: gpio@fe821000 { + pio14: gpio@fe821000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -317,7 +317,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO14"; }; - PIO15: gpio@fe822000 { + pio15: gpio@fe822000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -325,7 +325,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO15"; }; - PIO16: gpio@fe823000 { + pio16: gpio@fe823000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -333,7 +333,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO16"; }; - PIO17: gpio@fe824000 { + pio17: gpio@fe824000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -341,7 +341,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO17"; }; - PIO18: gpio@fe825000 { + pio18: gpio@fe825000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -353,8 +353,8 @@ serial2 { pinctrl_serial2: serial2-0 { st,pins { - tx = <&PIO17 4 ALT2 OUT>; - rx = <&PIO17 5 ALT2 IN>; + tx = <&pio17 4 ALT2 OUT>; + rx = <&pio17 5 ALT2 IN>; }; }; }; @@ -362,73 +362,94 @@ gmac0{ pinctrl_mii0: mii0 { st,pins { - mdint = <&PIO13 6 ALT2 IN BYPASS 0>; - txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - - txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - - txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; - txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - crs = <&PIO15 2 ALT2 IN BYPASS 1000>; - col = <&PIO15 3 ALT2 IN BYPASS 1000>; - mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>; - mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; - - rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>; - phyclk = <&PIO13 5 ALT2 OUT NICLK 1000 CLK_A>; + mdint = <&pio13 6 ALT2 IN BYPASS 0>; + txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + + txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; + txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; + + txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; + txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + crs = <&pio15 2 ALT2 IN BYPASS 1000>; + col = <&pio15 3 ALT2 IN BYPASS 1000>; + mdio = <&pio15 4 ALT2 OUT BYPASS 3000>; + mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; + + rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; + phyclk = <&pio13 5 ALT2 OUT NICLK 1000 CLK_A>; }; }; pinctrl_gmii0: gmii0 { st,pins { - mdint = <&PIO13 6 ALT2 IN BYPASS 0>; - mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>; - mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; - txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - - txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd4 = <&PIO14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd5 = <&PIO14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd6 = <&PIO14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd7 = <&PIO14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - - txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; - txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - crs = <&PIO15 2 ALT2 IN BYPASS 1000>; - col = <&PIO15 3 ALT2 IN BYPASS 1000>; - rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - - rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd4 = <&PIO16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd5 = <&PIO16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd6 = <&PIO16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd7 = <&PIO16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - - rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>; - clk125 = <&PIO17 6 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>; + mdint = <&pio13 6 ALT2 IN BYPASS 0>; + mdio = <&pio15 4 ALT2 OUT BYPASS 3000>; + mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; + txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; + + txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; + txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; + txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd4 = <&pio14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd5 = <&pio14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd6 = <&pio14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd7 = <&pio14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + + txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; + txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; + crs = <&pio15 2 ALT2 IN BYPASS 1000>; + col = <&pio15 3 ALT2 IN BYPASS 1000>; + rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + + rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd4 = <&pio16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd5 = <&pio16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd6 = <&pio16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd7 = <&pio16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + + rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; + clk125 = <&pio17 6 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>; }; }; }; + + mmc0 { + pinctrl_mmc0: mmc0 { + st,pins { + mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>; + data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>; + data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>; + data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>; + data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>; + cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>; + wp = <&pio15 3 ALT4 IN>; + data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>; + data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>; + data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>; + data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>; + pwr = <&pio17 1 ALT4 OUT>; + cd = <&pio17 2 ALT4 IN>; + led = <&pio17 3 ALT4 OUT>; + }; + }; + }; }; pin-controller-left { @@ -442,7 +463,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfd6b0000 0x3000>; - PIO100: gpio@fd6b0000 { + pio100: gpio@fd6b0000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -450,7 +471,7 @@ reg = <0 0x100>; st,bank-name = "PIO100"; }; - PIO101: gpio@fd6b1000 { + pio101: gpio@fd6b1000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -458,7 +479,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO101"; }; - PIO102: gpio@fd6b2000 { + pio102: gpio@fd6b2000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -479,7 +500,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfd330000 0x5000>; - PIO103: gpio@fd330000 { + pio103: gpio@fd330000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -487,7 +508,7 @@ reg = <0 0x100>; st,bank-name = "PIO103"; }; - PIO104: gpio@fd331000 { + pio104: gpio@fd331000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -495,7 +516,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO104"; }; - PIO105: gpio@fd332000 { + pio105: gpio@fd332000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -503,7 +524,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO105"; }; - PIO106: gpio@fd333000 { + pio106: gpio@fd333000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -511,7 +532,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO106"; }; - PIO107: gpio@fd334000 { + pio107: gpio@fd334000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index a0f6f75fe3b5..9198c12765ea 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -218,5 +218,17 @@ resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>, <&softreset STIH415_KEYSCAN_SOFTRESET>; }; + + mmc0: sdhci@fe81e000 { + compatible = "st,sdhci"; + status = "disabled"; + reg = <0xfe81e000 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_NONE>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0>; + clock-names = "mmc"; + clocks = <&clk_s_a1_ls 1>; + }; }; }; diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts index 4e2df66b99ea..5d1543babf56 100644 --- a/arch/arm/boot/dts/stih416-b2020.dts +++ b/arch/arm/boot/dts/stih416-b2020.dts @@ -12,4 +12,26 @@ / { model = "STiH416 B2020"; compatible = "st,stih416-b2020", "st,stih416"; + + soc { + mmc1: sdhci@fe81f000 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + miphy365x_phy: miphy365x@fe382000 { + phy_port0: port@fe382000 { + st,sata-gen = <3>; + }; + + phy_port1: port@fe38a000 { + st,pcie-tx-pol-inv; + }; + }; + + sata0: sata@fe380000{ + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts index ba0fa2caaf18..956fab8b8ffe 100644 --- a/arch/arm/boot/dts/stih416-b2020e.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts @@ -19,17 +19,37 @@ red { #gpio-cells = <1>; label = "Front Panel LED"; - gpios = <&PIO4 1>; + gpios = <&pio4 1>; linux,default-trigger = "heartbeat"; }; green { - gpios = <&PIO1 3>; + gpios = <&pio1 3>; default-state = "off"; }; }; ethernet1: dwmac@fef08000 { - snps,reset-gpio = <&PIO0 7>; + snps,reset-gpio = <&pio0 7>; + }; + + mmc1: sdhci@fe81f000 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + miphy365x_phy: miphy365x@fe382000 { + phy_port0: port@fe382000 { + st,sata-gen = <3>; + }; + + phy_port1: port@fe38a000 { + st,pcie-tx-pol-inv; + }; + }; + + sata0: sata@fe380000{ + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index ee6c119e261e..c2025bc37dd5 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -12,36 +12,36 @@ / { aliases { - gpio0 = &PIO0; - gpio1 = &PIO1; - gpio2 = &PIO2; - gpio3 = &PIO3; - gpio4 = &PIO4; - gpio5 = &PIO40; - gpio6 = &PIO5; - gpio7 = &PIO6; - gpio8 = &PIO7; - gpio9 = &PIO8; - gpio10 = &PIO9; - gpio11 = &PIO10; - gpio12 = &PIO11; - gpio13 = &PIO12; - gpio14 = &PIO30; - gpio15 = &PIO31; - gpio16 = &PIO13; - gpio17 = &PIO14; - gpio18 = &PIO15; - gpio19 = &PIO16; - gpio20 = &PIO17; - gpio21 = &PIO18; - gpio22 = &PIO100; - gpio23 = &PIO101; - gpio24 = &PIO102; - gpio25 = &PIO103; - gpio26 = &PIO104; - gpio27 = &PIO105; - gpio28 = &PIO106; - gpio29 = &PIO107; + gpio0 = &pio0; + gpio1 = &pio1; + gpio2 = &pio2; + gpio3 = &pio3; + gpio4 = &pio4; + gpio5 = &pio40; + gpio6 = &pio5; + gpio7 = &pio6; + gpio8 = &pio7; + gpio9 = &pio8; + gpio10 = &pio9; + gpio11 = &pio10; + gpio12 = &pio11; + gpio13 = &pio12; + gpio14 = &pio30; + gpio15 = &pio31; + gpio16 = &pio13; + gpio17 = &pio14; + gpio18 = &pio15; + gpio19 = &pio16; + gpio20 = &pio17; + gpio21 = &pio18; + gpio22 = &pio100; + gpio23 = &pio101; + gpio24 = &pio102; + gpio25 = &pio103; + gpio26 = &pio104; + gpio27 = &pio105; + gpio28 = &pio106; + gpio29 = &pio107; }; soc { @@ -56,7 +56,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x6000>; - PIO0: gpio@fe610000 { + pio0: gpio@fe610000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -64,7 +64,7 @@ reg = <0 0x100>; st,bank-name = "PIO0"; }; - PIO1: gpio@fe611000 { + pio1: gpio@fe611000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -72,7 +72,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO1"; }; - PIO2: gpio@fe612000 { + pio2: gpio@fe612000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -80,7 +80,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO2"; }; - PIO3: gpio@fe613000 { + pio3: gpio@fe613000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -88,7 +88,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO3"; }; - PIO4: gpio@fe614000 { + pio4: gpio@fe614000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -96,7 +96,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO4"; }; - PIO40: gpio@fe615000 { + pio40: gpio@fe615000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -109,15 +109,15 @@ rc{ pinctrl_ir: ir0 { st,pins { - ir = <&PIO4 0 ALT2 IN>; + ir = <&pio4 0 ALT2 IN>; }; }; }; sbc_serial1 { pinctrl_sbc_serial1: sbc_serial1 { st,pins { - tx = <&PIO2 6 ALT3 OUT>; - rx = <&PIO2 7 ALT3 IN>; + tx = <&pio2 6 ALT3 OUT>; + rx = <&pio2 7 ALT3 IN>; }; }; }; @@ -125,15 +125,15 @@ keyscan { pinctrl_keyscan: keyscan { st,pins { - keyin0 = <&PIO0 2 ALT2 IN>; - keyin1 = <&PIO0 3 ALT2 IN>; - keyin2 = <&PIO0 4 ALT2 IN>; - keyin3 = <&PIO2 6 ALT2 IN>; - - keyout0 = <&PIO1 6 ALT2 OUT>; - keyout1 = <&PIO1 7 ALT2 OUT>; - keyout2 = <&PIO0 6 ALT2 OUT>; - keyout3 = <&PIO2 7 ALT2 OUT>; + keyin0 = <&pio0 2 ALT2 IN>; + keyin1 = <&pio0 3 ALT2 IN>; + keyin2 = <&pio0 4 ALT2 IN>; + keyin3 = <&pio2 6 ALT2 IN>; + + keyout0 = <&pio1 6 ALT2 OUT>; + keyout1 = <&pio1 7 ALT2 OUT>; + keyout2 = <&pio0 6 ALT2 OUT>; + keyout3 = <&pio2 7 ALT2 OUT>; }; }; }; @@ -141,8 +141,8 @@ sbc_i2c0 { pinctrl_sbc_i2c0_default: sbc_i2c0-default { st,pins { - sda = <&PIO4 6 ALT1 BIDIR>; - scl = <&PIO4 5 ALT1 BIDIR>; + sda = <&pio4 6 ALT1 BIDIR>; + scl = <&pio4 5 ALT1 BIDIR>; }; }; }; @@ -150,8 +150,8 @@ sbc_i2c1 { pinctrl_sbc_i2c1_default: sbc_i2c1-default { st,pins { - sda = <&PIO3 2 ALT2 BIDIR>; - scl = <&PIO3 1 ALT2 BIDIR>; + sda = <&pio3 2 ALT2 BIDIR>; + scl = <&pio3 1 ALT2 BIDIR>; }; }; }; @@ -159,51 +159,51 @@ gmac1 { pinctrl_mii1: mii1 { st,pins { - txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; - col = <&PIO0 7 ALT1 IN BYPASS 1000>; - - mdio = <&PIO1 0 ALT1 OUT BYPASS 1500>; - mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; - crs = <&PIO1 2 ALT1 IN BYPASS 1000>; - mdint = <&PIO1 3 ALT1 IN BYPASS 0>; - rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; - - rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>; + txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + col = <&pio0 7 ALT1 IN BYPASS 1000>; + + mdio = <&pio1 0 ALT1 OUT BYPASS 1500>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + crs = <&pio1 2 ALT1 IN BYPASS 1000>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + + rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; }; }; pinctrl_rgmii1: rgmii1-0 { st,pins { - txd0 = <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>; - txd1 = <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>; - txd2 = <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>; - txd3 = <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>; - txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>; - txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; - - mdio = <&PIO1 0 ALT1 OUT BYPASS 0>; - mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; - rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>; - rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>; - rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>; - rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>; - - rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>; - rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>; - - clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>; + txd0 = <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>; + txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>; + + rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>; + + clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>; }; }; }; @@ -220,7 +220,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfee00000 0x10000>; - PIO5: gpio@fee00000 { + pio5: gpio@fee00000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -228,7 +228,7 @@ reg = <0 0x100>; st,bank-name = "PIO5"; }; - PIO6: gpio@fee01000 { + pio6: gpio@fee01000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -236,7 +236,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO6"; }; - PIO7: gpio@fee02000 { + pio7: gpio@fee02000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -244,7 +244,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO7"; }; - PIO8: gpio@fee03000 { + pio8: gpio@fee03000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -252,7 +252,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO8"; }; - PIO9: gpio@fee04000 { + pio9: gpio@fee04000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -260,7 +260,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO9"; }; - PIO10: gpio@fee05000 { + pio10: gpio@fee05000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -268,7 +268,7 @@ reg = <0x5000 0x100>; st,bank-name = "PIO10"; }; - PIO11: gpio@fee06000 { + pio11: gpio@fee06000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -276,7 +276,7 @@ reg = <0x6000 0x100>; st,bank-name = "PIO11"; }; - PIO12: gpio@fee07000 { + pio12: gpio@fee07000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -284,7 +284,7 @@ reg = <0x7000 0x100>; st,bank-name = "PIO12"; }; - PIO30: gpio@fee08000 { + pio30: gpio@fee08000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -292,7 +292,7 @@ reg = <0x8000 0x100>; st,bank-name = "PIO30"; }; - PIO31: gpio@fee09000 { + pio31: gpio@fee09000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -304,7 +304,7 @@ serial2-oe { pinctrl_serial2_oe: serial2-1 { st,pins { - output-enable = <&PIO11 3 ALT2 OUT>; + output-enable = <&pio11 3 ALT2 OUT>; }; }; }; @@ -312,8 +312,8 @@ i2c0 { pinctrl_i2c0_default: i2c0-default { st,pins { - sda = <&PIO9 3 ALT1 BIDIR>; - scl = <&PIO9 2 ALT1 BIDIR>; + sda = <&pio9 3 ALT1 BIDIR>; + scl = <&pio9 2 ALT1 BIDIR>; }; }; }; @@ -321,8 +321,8 @@ i2c1 { pinctrl_i2c1_default: i2c1-default { st,pins { - sda = <&PIO12 1 ALT1 BIDIR>; - scl = <&PIO12 0 ALT1 BIDIR>; + sda = <&pio12 1 ALT1 BIDIR>; + scl = <&pio12 0 ALT1 BIDIR>; }; }; }; @@ -330,12 +330,12 @@ fsm { pinctrl_fsm: fsm { st,pins { - spi-fsm-clk = <&PIO12 2 ALT1 OUT>; - spi-fsm-cs = <&PIO12 3 ALT1 OUT>; - spi-fsm-mosi = <&PIO12 4 ALT1 OUT>; - spi-fsm-miso = <&PIO12 5 ALT1 IN>; - spi-fsm-hol = <&PIO12 6 ALT1 OUT>; - spi-fsm-wp = <&PIO12 7 ALT1 OUT>; + spi-fsm-clk = <&pio12 2 ALT1 OUT>; + spi-fsm-cs = <&pio12 3 ALT1 OUT>; + spi-fsm-mosi = <&pio12 4 ALT1 OUT>; + spi-fsm-miso = <&pio12 5 ALT1 IN>; + spi-fsm-hol = <&pio12 6 ALT1 OUT>; + spi-fsm-wp = <&pio12 7 ALT1 OUT>; }; }; }; @@ -352,7 +352,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfe820000 0x6000>; - PIO13: gpio@fe820000 { + pio13: gpio@fe820000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -360,7 +360,7 @@ reg = <0 0x100>; st,bank-name = "PIO13"; }; - PIO14: gpio@fe821000 { + pio14: gpio@fe821000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -368,7 +368,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO14"; }; - PIO15: gpio@fe822000 { + pio15: gpio@fe822000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -376,7 +376,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO15"; }; - PIO16: gpio@fe823000 { + pio16: gpio@fe823000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -384,7 +384,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO16"; }; - PIO17: gpio@fe824000 { + pio17: gpio@fe824000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -392,7 +392,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO17"; }; - PIO18: gpio@fe825000 { + pio18: gpio@fe825000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -405,8 +405,8 @@ serial2 { pinctrl_serial2: serial2-0 { st,pins { - tx = <&PIO17 4 ALT2 OUT>; - rx = <&PIO17 5 ALT2 IN>; + tx = <&pio17 4 ALT2 OUT>; + rx = <&pio17 5 ALT2 IN>; }; }; }; @@ -414,28 +414,28 @@ gmac0 { pinctrl_mii0: mii0 { st,pins { - mdint = <&PIO13 6 ALT2 IN BYPASS 0>; - txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - - txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; - txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - crs = <&PIO15 2 ALT2 IN BYPASS 1000>; - col = <&PIO15 3 ALT2 IN BYPASS 1000>; - mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>; - mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; - - rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>; - phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>; + mdint = <&pio13 6 ALT2 IN BYPASS 0>; + txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; + txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; + + txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; + txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + crs = <&pio15 2 ALT2 IN BYPASS 1000>; + col = <&pio15 3 ALT2 IN BYPASS 1000>; + mdio= <&pio15 4 ALT2 OUT BYPASS 1500>; + mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; + + rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; + phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>; }; }; @@ -445,25 +445,64 @@ }; pinctrl_rgmii0: rgmii0 { st,pins { - phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>; - txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>; - txd0 = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>; - txd1 = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>; - txd2 = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>; - txd3 = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>; - txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; - - mdio = <&PIO15 4 ALT2 OUT BYPASS 0>; - mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; - - rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>; - rxd0 =<&PIO16 0 ALT2 IN DE_IO 500 CLK_A>; - rxd1 =<&PIO16 1 ALT2 IN DE_IO 500 CLK_A>; - rxd2 =<&PIO16 2 ALT2 IN DE_IO 500 CLK_A>; - rxd3 =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>; - rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>; - - clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>; + txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>; + txd0 = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>; + txd1 = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>; + txd2 = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>; + txd3 = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>; + txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; + + mdio = <&pio15 4 ALT2 OUT BYPASS 0>; + mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; + + rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>; + rxd0 =<&pio16 0 ALT2 IN DE_IO 500 CLK_A>; + rxd1 =<&pio16 1 ALT2 IN DE_IO 500 CLK_A>; + rxd2 =<&pio16 2 ALT2 IN DE_IO 500 CLK_A>; + rxd3 =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>; + rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>; + + clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>; + }; + }; + }; + + mmc0 { + pinctrl_mmc0: mmc0 { + st,pins { + mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>; + data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>; + data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>; + data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>; + data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>; + cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>; + wp = <&pio15 3 ALT4 IN>; + data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>; + data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>; + data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>; + data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>; + pwr = <&pio17 1 ALT4 OUT>; + cd = <&pio17 2 ALT4 IN>; + led = <&pio17 3 ALT4 OUT>; + }; + }; + }; + mmc1 { + pinctrl_mmc1: mmc1 { + st,pins { + mmcclk = <&pio15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>; + data0 = <&pio13 7 ALT3 BIDIR_PU BYPASS 0>; + data1 = <&pio14 1 ALT3 BIDIR_PU BYPASS 0>; + data2 = <&pio14 2 ALT3 BIDIR_PU BYPASS 0>; + data3 = <&pio14 3 ALT3 BIDIR_PU BYPASS 0>; + cmd = <&pio15 4 ALT3 BIDIR_PU BYPASS 0>; + data4 = <&pio15 6 ALT3 BIDIR_PU BYPASS 0>; + data5 = <&pio15 7 ALT3 BIDIR_PU BYPASS 0>; + data6 = <&pio16 0 ALT3 BIDIR_PU BYPASS 0>; + data7 = <&pio16 1 ALT3 BIDIR_PU BYPASS 0>; + pwr = <&pio16 2 ALT3 OUT>; + nreset = <&pio13 6 ALT3 OUT>; }; }; }; @@ -480,7 +519,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfd6b0000 0x3000>; - PIO100: gpio@fd6b0000 { + pio100: gpio@fd6b0000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -488,7 +527,7 @@ reg = <0 0x100>; st,bank-name = "PIO100"; }; - PIO101: gpio@fd6b1000 { + pio101: gpio@fd6b1000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -496,7 +535,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO101"; }; - PIO102: gpio@fd6b2000 { + pio102: gpio@fd6b2000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -517,7 +556,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfd330000 0x5000>; - PIO103: gpio@fd330000 { + pio103: gpio@fd330000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -525,7 +564,7 @@ reg = <0 0x100>; st,bank-name = "PIO103"; }; - PIO104: gpio@fd331000 { + pio104: gpio@fd331000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -533,7 +572,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO104"; }; - PIO105: gpio@fd332000 { + pio105: gpio@fd332000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -541,7 +580,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO105"; }; - PIO106: gpio@fd333000 { + pio106: gpio@fd333000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -550,7 +589,7 @@ st,bank-name = "PIO106"; }; - PIO107: gpio@fd334000 { + pio107: gpio@fd334000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 84758d76d064..1137bdfcca1c 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -9,6 +9,8 @@ #include "stih41x.dtsi" #include "stih416-clock.dtsi" #include "stih416-pinctrl.dtsi" + +#include <dt-bindings/phy/phy-miphy365x.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset-controller/stih416-resets.h> / { @@ -236,5 +238,83 @@ resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, <&softreset STIH416_KEYSCAN_SOFTRESET>; }; + + temp0 { + compatible = "st,stih416-sas-thermal"; + clock-names = "thermal"; + clocks = <&clockgen_c_vcc 14>; + + status = "okay"; + }; + + temp1@fdfe8000 { + compatible = "st,stih416-mpe-thermal"; + reg = <0xfdfe8000 0x10>; + clocks = <&clockgen_e 3>; + clock-names = "thermal"; + interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>; + + status = "okay"; + }; + + mmc0: sdhci@fe81e000 { + compatible = "st,sdhci"; + status = "disabled"; + reg = <0xfe81e000 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0>; + clock-names = "mmc"; + clocks = <&clk_s_a1_ls 1>; + }; + + mmc1: sdhci@fe81f000 { + compatible = "st,sdhci"; + status = "disabled"; + reg = <0xfe81f000 0x1000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1>; + clock-names = "mmc"; + clocks = <&clk_s_a1_ls 8>; + }; + + miphy365x_phy: miphy365x@fe382000 { + compatible = "st,miphy365x-phy"; + st,syscfg = <&syscfg_rear>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + phy_port0: port@fe382000 { + #phy-cells = <1>; + reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>; + reg-names = "sata", "pcie", "syscfg"; + }; + + phy_port1: port@fe38a000 { + #phy-cells = <1>; + reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>; + reg-names = "sata", "pcie", "syscfg"; + }; + }; + + sata0: sata@fe380000 { + compatible = "st,sti-ahci"; + reg = <0xfe380000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; + interrupt-names = "hostc"; + phys = <&phy_port0 MIPHY_TYPE_SATA>; + phy-names = "sata-phy"; + resets = <&powerdown STIH416_SATA0_POWERDOWN>, + <&softreset STIH416_SATA0_SOFTRESET>; + reset-names = "pwr-dwn", "sw-rst"; + clock-names = "ahci_clk"; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi index b3dd6ca5c2ae..5f91f455f05b 100644 --- a/arch/arm/boot/dts/stih41x-b2000.dtsi +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi @@ -35,7 +35,7 @@ fp_led { #gpio-cells = <1>; label = "Front Panel LED"; - gpios = <&PIO105 7>; + gpios = <&pio105 7>; linux,default-trigger = "heartbeat"; }; }; @@ -55,7 +55,7 @@ phy-mode = "mii"; pinctrl-0 = <&pinctrl_mii0>; - snps,reset-gpio = <&PIO106 2>; + snps,reset-gpio = <&pio106 2>; snps,reset-active-low; snps,reset-delays-us = <0 10000 10000>; }; @@ -65,7 +65,7 @@ phy-mode = "mii"; st,tx-retime-src = "txclk"; - snps,reset-gpio = <&PIO4 7>; + snps,reset-gpio = <&pio4 7>; snps,reset-active-low; snps,reset-delays-us = <0 10000 10000>; }; diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi index d8a84295c328..487d7d87dbef 100644 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -32,11 +32,11 @@ red { #gpio-cells = <1>; label = "Front Panel LED"; - gpios = <&PIO4 1>; + gpios = <&pio4 1>; linux,default-trigger = "heartbeat"; }; green { - gpios = <&PIO4 7>; + gpios = <&pio4 7>; default-state = "off"; }; }; @@ -68,11 +68,15 @@ phy-mode = "rgmii-id"; max-speed = <1000>; st,tx-retime-src = "clk_125"; - snps,reset-gpio = <&PIO3 0>; + snps,reset-gpio = <&pio3 0>; snps,reset-active-low; snps,reset-delays-us = <0 10000 10000>; pinctrl-0 = <&pinctrl_rgmii1>; }; + + mmc0: sdhci@fe81e000 { + bus-width = <8>; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2020x.dtsi b/arch/arm/boot/dts/stih41x-b2020x.dtsi index df01c1211b32..f797a0607382 100644 --- a/arch/arm/boot/dts/stih41x-b2020x.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020x.dtsi @@ -8,6 +8,10 @@ */ / { soc { + mmc0: sdhci@fe81e000 { + status = "okay"; + }; + spifsm: spifsm@fe902000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 24036c440440..ce2ef5bec4f2 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -30,7 +30,6 @@ /* kHz uV */ 666667 1000000 333334 1000000 - 222223 1000000 >; }; @@ -65,7 +64,7 @@ interrupt-parent = <&intc>; ranges; - adc@f8007100 { + adc: adc@f8007100 { compatible = "xlnx,zynq-xadc-1.00.a"; reg = <0xf8007100 0x20>; interrupts = <0 7 4>; @@ -137,7 +136,7 @@ <0xF8F00100 0x100>; }; - L2: cache-controller { + L2: cache-controller@f8f02000 { compatible = "arm,pl310-cache"; reg = <0xF8F02000 0x1000>; arm,data-latency = <3 2 2>; @@ -146,10 +145,10 @@ cache-level = <2>; }; - memory-controller@f8006000 { + mc: memory-controller@f8006000 { compatible = "xlnx,zynq-ddrc-a05"; reg = <0xf8006000 0x1000>; - } ; + }; uart0: serial@e0000000 { compatible = "xlnx,xuartps", "cdns,uart-r1p8"; @@ -195,7 +194,7 @@ gem0: ethernet@e000b000 { compatible = "cdns,gem"; - reg = <0xe000b000 0x4000>; + reg = <0xe000b000 0x1000>; status = "disabled"; interrupts = <0 22 4>; clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; @@ -206,7 +205,7 @@ gem1: ethernet@e000c000 { compatible = "cdns,gem"; - reg = <0xe000c000 0x4000>; + reg = <0xe000c000 0x1000>; status = "disabled"; interrupts = <0 45 4>; clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; @@ -315,5 +314,16 @@ reg = <0xf8f00600 0x20>; clocks = <&clkc 4>; }; + + watchdog0: watchdog@f8005000 { + clocks = <&clkc 45>; + compatible = "xlnx,zynq-wdt-r1p2"; + device_type = "watchdog"; + interrupt-parent = <&intc>; + interrupts = <0 9 1>; + reg = <0xf8005000 0x1000>; + reset = <0>; + timeout-sec = <10>; + }; }; }; |