diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/net/mediatek-net.txt | 7 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/rtc/s3c-rtc.txt | 7 | ||||
| -rw-r--r-- | Documentation/input/event-codes.txt | 4 |
3 files changed, 13 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index 5ca79290eabf..32eaaca04d9b 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -9,7 +9,8 @@ have dual GMAC each represented by a child node.. Required properties: - compatible: Should be "mediatek,mt7623-eth" - reg: Address and length of the register set for the device -- interrupts: Should contain the frame engines interrupt +- interrupts: Should contain the three frame engines interrupts in numeric + order. These are fe_int0, fe_int1 and fe_int2. - clocks: the clock used by the core - clock-names: the names of the clock listed in the clocks property. These are "ethif", "esw", "gp2", "gp1" @@ -42,7 +43,9 @@ eth: ethernet@1b100000 { <ðsys CLK_ETHSYS_GP2>, <ðsys CLK_ETHSYS_GP1>; clock-names = "ethif", "esw", "gp2", "gp1"; - interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW + GIC_SPI 199 IRQ_TYPE_LEVEL_LOW + GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; resets = <ðsys MT2701_ETHSYS_ETH_RST>; reset-names = "eth"; diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt index 1068ffce9f91..fdde63a5419c 100644 --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt @@ -15,9 +15,10 @@ Required properties: is the rtc tick interrupt. The number of cells representing a interrupt depends on the parent interrupt controller. - clocks: Must contain a list of phandle and clock specifier for the rtc - and source clocks. -- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the - same order as the clocks property. + clock and in the case of a s3c6410 compatible controller, also + a source clock. +- clock-names: Must contain "rtc" and for a s3c6410 compatible controller, + a "rtc_src" sorted in the same order as the clocks property. Example: diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt index 3f0f5ce3338b..36ea940e5bb9 100644 --- a/Documentation/input/event-codes.txt +++ b/Documentation/input/event-codes.txt @@ -173,6 +173,10 @@ A few EV_ABS codes have special meanings: proximity of the device and while the value of the BTN_TOUCH code is 0. If the input device may be used freely in three dimensions, consider ABS_Z instead. + - BTN_TOOL_<name> should be set to 1 when the tool comes into detectable + proximity and set to 0 when the tool leaves detectable proximity. + BTN_TOOL_<name> signals the type of tool that is currently detected by the + hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH. * ABS_MT_<name>: - Used to describe multitouch input events. Please see |