diff options
| author | York Sun <york.sun@nxp.com> | 2016-09-26 08:09:25 -0700 |
|---|---|---|
| committer | York Sun <york.sun@nxp.com> | 2016-09-26 08:53:07 -0700 |
| commit | 1fdcc8dfc7612acc765cd483051dcfaac399f4f1 (patch) | |
| tree | 282484829ff5a8c8c79cab37da823e7fde9b7e63 /drivers/ddr | |
| parent | da28e58a7fc169625334b1e40f72067b481b352a (diff) | |
driver: ddr: fsl_mmdc: Pass board parameters through data structure
Instead of using multiple macros, a data structure is used to pass
board-specific parameters to MMDC DDR driver.
Signed-off-by: York Sun <york.sun@nxp.com>
CC: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'drivers/ddr')
| -rw-r--r-- | drivers/ddr/fsl/fsl_mmdc.c | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/drivers/ddr/fsl/fsl_mmdc.c b/drivers/ddr/fsl/fsl_mmdc.c index 1e359674da..52eec0f9e9 100644 --- a/drivers/ddr/fsl/fsl_mmdc.c +++ b/drivers/ddr/fsl/fsl_mmdc.c @@ -26,7 +26,7 @@ static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits) printf("Error: %p wait for clear timeout.\n", ptr); } -void mmdc_init(void) +void mmdc_init(const struct fsl_mmdc_info *priv) { struct mmdc_regs *mmdc = (struct mmdc_regs *)CONFIG_SYS_FSL_DDR_ADDR; unsigned int tmp; @@ -35,26 +35,26 @@ void mmdc_init(void) out_be32(&mmdc->mdscr, MDSCR_ENABLE_CON_REQ); /* 2. configure the desired timing parameters */ - out_be32(&mmdc->mdotc, CONFIG_MMDC_MDOTC); - out_be32(&mmdc->mdcfg0, CONFIG_MMDC_MDCFG0); - out_be32(&mmdc->mdcfg1, CONFIG_MMDC_MDCFG1); - out_be32(&mmdc->mdcfg2, CONFIG_MMDC_MDCFG2); + out_be32(&mmdc->mdotc, priv->mdotc); + out_be32(&mmdc->mdcfg0, priv->mdcfg0); + out_be32(&mmdc->mdcfg1, priv->mdcfg1); + out_be32(&mmdc->mdcfg2, priv->mdcfg2); /* 3. configure DDR type and other miscellaneous parameters */ - out_be32(&mmdc->mdmisc, CONFIG_MMDC_MDMISC); + out_be32(&mmdc->mdmisc, priv->mdmisc); out_be32(&mmdc->mpmur0, MMDC_MPMUR0_FRC_MSR); - out_be32(&mmdc->mdrwd, CONFIG_MMDC_MDRWD); - out_be32(&mmdc->mpodtctrl, CONFIG_MMDC_MPODTCTRL); + out_be32(&mmdc->mdrwd, priv->mdrwd); + out_be32(&mmdc->mpodtctrl, priv->mpodtctrl); /* 4. configure the required delay while leaving reset */ - out_be32(&mmdc->mdor, CONFIG_MMDC_MDOR); + out_be32(&mmdc->mdor, priv->mdor); /* 5. configure DDR physical parameters */ /* set row/column address width, burst length, data bus width */ - tmp = CONFIG_MMDC_MDCTL & ~(MDCTL_SDE0 | MDCTL_SDE1); + tmp = priv->mdctl & ~(MDCTL_SDE0 | MDCTL_SDE1); out_be32(&mmdc->mdctl, tmp); /* configure address space partition */ - out_be32(&mmdc->mdasp, CONFIG_MMDC_MDASP); + out_be32(&mmdc->mdasp, priv->mdasp); /* 6. perform a ZQ calibration - not needed here, doing in #8b */ @@ -84,7 +84,7 @@ void mmdc_init(void) out_be32(&mmdc->mdscr, CMD_ADDR_MSB_MR_OP(0x4) | MDSCR_ENABLE_CON_REQ | CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0); - set_wait_for_bits_clear(&mmdc->mpzqhwctrl, CONFIG_MMDC_MPZQHWCTRL, + set_wait_for_bits_clear(&mmdc->mpzqhwctrl, priv->mpzqhwctrl, MPZQHWCTRL_ZQ_HW_FORCE); /* 9a. calibrations now, wr lvl */ @@ -116,11 +116,11 @@ void mmdc_init(void) out_be32(&mmdc->mppdcmpr2, MPPDCMPR2_MPR_COMPARE_EN); /* set absolute read delay offset */ -#if defined(CONFIG_MMDC_MPRDDLCTL) - out_be32(&mmdc->mprddlctl, CONFIG_MMDC_MPRDDLCTL); -#else - out_be32(&mmdc->mprddlctl, MMDC_MPRDDLCTL_DEFAULT_DELAY); -#endif + if (priv->mprddlctl) + out_be32(&mmdc->mprddlctl, priv->mprddlctl); + else + out_be32(&mmdc->mprddlctl, MMDC_MPRDDLCTL_DEFAULT_DELAY); + set_wait_for_bits_clear(&mmdc->mpdgctrl0, AUTO_RD_DQS_GATING_CALIBRATION_EN, AUTO_RD_DQS_GATING_CALIBRATION_EN); @@ -142,13 +142,13 @@ void mmdc_init(void) CMD_BANK_ADDR_3); /* 10. configure power-down, self-refresh entry, exit parameters */ - out_be32(&mmdc->mdpdc, CONFIG_MMDC_MDPDC); + out_be32(&mmdc->mdpdc, priv->mdpdc); out_be32(&mmdc->mapsr, MMDC_MAPSR_PWR_SAV_CTRL_STAT); /* 11. ZQ config again? do nothing here */ /* 12. refresh scheme */ - set_wait_for_bits_clear(&mmdc->mdref, CONFIG_MMDC_MDREF, + set_wait_for_bits_clear(&mmdc->mdref, priv->mdref, MDREF_START_REFRESH); /* 13. disable CON_REQ */ |