diff options
Diffstat (limited to 'drivers/parisc')
-rw-r--r-- | drivers/parisc/dino.c | 10 | ||||
-rw-r--r-- | drivers/parisc/eisa_eeprom.c | 2 | ||||
-rw-r--r-- | drivers/parisc/lba_pci.c | 33 |
3 files changed, 39 insertions, 6 deletions
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 0b3fb99d9b89..7390fb8ca9d1 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -303,7 +303,7 @@ static void dino_mask_irq(struct irq_data *d) struct dino_device *dino_dev = irq_data_get_irq_chip_data(d); int local_irq = gsc_find_local_irq(d->irq, dino_dev->global_irq, DINO_LOCAL_IRQS); - DBG(KERN_WARNING "%s(0x%p, %d)\n", __func__, dino_dev, d->irq); + DBG(KERN_WARNING "%s(0x%px, %d)\n", __func__, dino_dev, d->irq); /* Clear the matching bit in the IMR register */ dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq)); @@ -316,7 +316,7 @@ static void dino_unmask_irq(struct irq_data *d) int local_irq = gsc_find_local_irq(d->irq, dino_dev->global_irq, DINO_LOCAL_IRQS); u32 tmp; - DBG(KERN_WARNING "%s(0x%p, %d)\n", __func__, dino_dev, d->irq); + DBG(KERN_WARNING "%s(0x%px, %d)\n", __func__, dino_dev, d->irq); /* ** clear pending IRQ bits @@ -396,7 +396,7 @@ ilr_again: if (mask) { if (--ilr_loop > 0) goto ilr_again; - printk(KERN_ERR "Dino 0x%p: stuck interrupt %d\n", + printk(KERN_ERR "Dino 0x%px: stuck interrupt %d\n", dino_dev->hba.base_addr, mask); return IRQ_NONE; } @@ -553,7 +553,7 @@ dino_fixup_bus(struct pci_bus *bus) struct pci_dev *dev; struct dino_device *dino_dev = DINO_DEV(parisc_walk_tree(bus->bridge)); - DBG(KERN_WARNING "%s(0x%p) bus %d platform_data 0x%p\n", + DBG(KERN_WARNING "%s(0x%px) bus %d platform_data 0x%px\n", __func__, bus, bus->busn_res.start, bus->bridge->platform_data); @@ -854,7 +854,7 @@ static int __init dino_common_init(struct parisc_device *dev, res->flags = IORESOURCE_IO; /* do not mark it busy ! */ if (request_resource(&ioport_resource, res) < 0) { printk(KERN_ERR "%s: request I/O Port region failed " - "0x%lx/%lx (hpa 0x%p)\n", + "0x%lx/%lx (hpa 0x%px)\n", name, (unsigned long)res->start, (unsigned long)res->end, dino_dev->hba.base_addr); return 1; diff --git a/drivers/parisc/eisa_eeprom.c b/drivers/parisc/eisa_eeprom.c index 4dd9b1308128..99a80da6fd2e 100644 --- a/drivers/parisc/eisa_eeprom.c +++ b/drivers/parisc/eisa_eeprom.c @@ -106,7 +106,7 @@ static int __init eisa_eeprom_init(void) return retval; } - printk(KERN_INFO "EISA EEPROM at 0x%p\n", eisa_eeprom_addr); + printk(KERN_INFO "EISA EEPROM at 0x%px\n", eisa_eeprom_addr); return 0; } diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index a25fed52f7e9..41b740aed3a3 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1692,3 +1692,36 @@ void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask) iounmap(base_addr); } + +/* + * The design of the Diva management card in rp34x0 machines (rp3410, rp3440) + * seems rushed, so that many built-in components simply don't work. + * The following quirks disable the serial AUX port and the built-in ATI RV100 + * Radeon 7000 graphics card which both don't have any external connectors and + * thus are useless, and even worse, e.g. the AUX port occupies ttyS0 and as + * such makes those machines the only PARISC machines on which we can't use + * ttyS0 as boot console. + */ +static void quirk_diva_ati_card(struct pci_dev *dev) +{ + if (dev->subsystem_vendor != PCI_VENDOR_ID_HP || + dev->subsystem_device != 0x1292) + return; + + dev_info(&dev->dev, "Hiding Diva built-in ATI card"); + dev->device = 0; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QY, + quirk_diva_ati_card); + +static void quirk_diva_aux_disable(struct pci_dev *dev) +{ + if (dev->subsystem_vendor != PCI_VENDOR_ID_HP || + dev->subsystem_device != 0x1291) + return; + + dev_info(&dev->dev, "Hiding Diva built-in AUX serial device"); + dev->device = 0; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, + quirk_diva_aux_disable); |