From 11f869a0664871bb65abae86b8a0a2973a8f1b4b Mon Sep 17 00:00:00 2001 From: Nikolay Dimitrov Date: Sat, 8 Sep 2018 03:24:52 +0300 Subject: board: resurrect support for RIoTboard Resurrect support for RIoTboard after 2018.02.x deprecation. Signed-off-by: Nikolay Dimitrov Signed-off-by: Thomas Petazzoni --- board/embest/riotboard/genimage.cfg | 17 ++++++++++ board/embest/riotboard/readme.txt | 38 ++++++++++++++++++++++ .../rootfs_overlay/boot/extlinux/extlinux.conf | 6 ++++ 3 files changed, 61 insertions(+) create mode 100644 board/embest/riotboard/genimage.cfg create mode 100644 board/embest/riotboard/readme.txt create mode 100644 board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf (limited to 'board') diff --git a/board/embest/riotboard/genimage.cfg b/board/embest/riotboard/genimage.cfg new file mode 100644 index 0000000000..1221c83b9a --- /dev/null +++ b/board/embest/riotboard/genimage.cfg @@ -0,0 +1,17 @@ +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.imx" + offset = 1024 + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext2" + offset = 1M + size = 60M + } +} diff --git a/board/embest/riotboard/readme.txt b/board/embest/riotboard/readme.txt new file mode 100644 index 0000000000..4ba836fa5a --- /dev/null +++ b/board/embest/riotboard/readme.txt @@ -0,0 +1,38 @@ +Buildroot for Embest RIoTboard +============================== + +This is a small development board, based on Freescale IMX6 Solo SoC +(single core ARM Cortex-A9). + +More details about the board can be found at: + + http://www.embest-tech.com/riotboard + +1. Compiling buildroot +---------------------- + +$ make riotboard_defconfig +$ make + +2. Installing buildroot +----------------------- + +Prepare an SD-card and plug it into your card reader. Always double +check the block device before writing to it, as writing to the wrong +block device can cause irrecoverable data loss. Now you can write the +image to your SD-card: + +sudo dd if=output/images/sdcard.img of=/dev/ bs=1M + +3. Running buildroot +-------------------- + +Position the board so you can read the label "RIoTboard" on the right +side of SW1 DIP switches. Configure the SW1 swiches like this: + +1 0 1 0 0 1 0 1 +ON OFF ON OFF OFF ON OFF ON + +Now plug your prepared SD-card in slot J6. Connect a serial console +(115200, 8, N, 1) to header J18. Connect a 5V/1A power supply to the +board and enjoy. diff --git a/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf b/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf new file mode 100644 index 0000000000..23e48a0da7 --- /dev/null +++ b/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf @@ -0,0 +1,6 @@ +default buildroot + +label buildroot +kernel /boot/zImage +devicetree /boot/imx6dl-riotboard.dtb +append console=ttymxc1,115200 root=/dev/mmcblk1p1 rw -- cgit v1.2.3