1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
|
/*
* U-boot - cpu.c CPU specific functions
*
* Copyright (c) 2005-2008 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <command.h>
#include <asm/blackfin.h>
#include <asm/cplb.h>
#include <asm/mach-common/bits/core.h>
#include <asm/mach-common/bits/ebiu.h>
#include <asm/mach-common/bits/trace.h>
#include <asm/serial.h>
#include "cpu.h"
#include "initcode.h"
ulong bfin_poweron_retx;
#if defined(CONFIG_CORE1_RUN) && defined(COREB_L1_CODE_START)
void bfin_core1_start(void)
{
#ifdef BF561_FAMILY
/* Enable core 1 */
bfin_write_SYSCR(bfin_read_SYSCR() & ~0x0020);
#else
/* Enable core 1 */
bfin_write32(RCU0_SVECT1, COREB_L1_CODE_START);
bfin_write32(RCU0_CRCTL, 0);
bfin_write32(RCU0_CRCTL, 0x2);
/* Check if core 1 starts */
while (!(bfin_read32(RCU0_CRSTAT) & 0x2))
continue;
bfin_write32(RCU0_CRCTL, 0);
/* flag to notify cces core 1 application */
bfin_write32(SDU0_MSG_SET, (1 << 19));
#endif
}
#endif
__attribute__ ((__noreturn__))
void cpu_init_f(ulong bootflag, ulong loaded_from_ldr)
{
#ifndef CONFIG_BFIN_BOOTROM_USES_EVT1
/* Build a NOP slide over the LDR jump block. Whee! */
char nops[0xC];
serial_early_puts("NOP Slide\n");
memset(nops, 0x00, sizeof(nops));
memcpy((void *)L1_INST_SRAM, nops, sizeof(nops));
#endif
if (!loaded_from_ldr) {
/* Relocate sections into L1 if the LDR didn't do it -- don't
* check length because the linker script does the size
* checking at build time.
*/
serial_early_puts("L1 Relocate\n");
extern char _stext_l1[], _text_l1_lma[], _text_l1_len[];
memcpy(&_stext_l1, &_text_l1_lma, (unsigned long)_text_l1_len);
extern char _sdata_l1[], _data_l1_lma[], _data_l1_len[];
memcpy(&_sdata_l1, &_data_l1_lma, (unsigned long)_data_l1_len);
}
/*
* Make sure our async settings are committed. Some bootroms
* (like the BF537) will reset some registers on us after it
* has finished loading the LDR. Or if we're booting over
* JTAG, the initcode never got a chance to run. Or if we
* aren't booting from parallel flash, the initcode skipped
* this step completely.
*/
program_async_controller(NULL);
/* Save RETX so we can pass it while booting Linux */
bfin_poweron_retx = bootflag;
#ifdef CONFIG_DEBUG_DUMP
/* Turn on hardware trace buffer */
bfin_write_TBUFCTL(TBUFPWR | TBUFEN);
#endif
#ifndef CONFIG_PANIC_HANG
/* Reset upon a double exception rather than just hanging.
* Do not do bfin_read on SWRST as that will reset status bits.
*/
# ifdef SWRST
bfin_write_SWRST(DOUBLE_FAULT);
# endif
#endif
#if defined(CONFIG_CORE1_RUN) && defined(COREB_L1_CODE_START)
bfin_core1_start();
#endif
serial_early_puts("Board init flash\n");
board_init_f(bootflag);
}
int exception_init(void)
{
bfin_write_EVT3(trap);
return 0;
}
int irq_init(void)
{
#ifdef SIC_IMASK0
bfin_write_SIC_IMASK0(0);
bfin_write_SIC_IMASK1(0);
# ifdef SIC_IMASK2
bfin_write_SIC_IMASK2(0);
# endif
#elif defined(SICA_IMASK0)
bfin_write_SICA_IMASK0(0);
bfin_write_SICA_IMASK1(0);
#elif defined(SIC_IMASK)
bfin_write_SIC_IMASK(0);
#endif
/* Set up a dummy NMI handler if needed. */
if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS || ANOMALY_05000219)
bfin_write_EVT2(evt_nmi); /* NMI */
bfin_write_EVT5(evt_default); /* hardware error */
bfin_write_EVT6(evt_default); /* core timer */
bfin_write_EVT7(evt_default);
bfin_write_EVT8(evt_default);
bfin_write_EVT9(evt_default);
bfin_write_EVT10(evt_default);
bfin_write_EVT11(evt_default);
bfin_write_EVT12(evt_default);
bfin_write_EVT13(evt_default);
bfin_write_EVT14(evt_default);
bfin_write_EVT15(evt_default);
bfin_write_ILAT(0);
CSYNC();
/* enable hardware error irq */
irq_flags = 0x3f;
local_irq_enable();
return 0;
}
|
