/* * ifdtool - Manage Intel Firmware Descriptor information * * Copyright 2014 Google, Inc * * SPDX-License-Identifier: GPL-2.0 * * From Coreboot project, but it got a serious code clean-up * and a few new features */ #include #include #include #include #include #include #include #include #include #include #include "ifdtool.h" #undef DEBUG #ifdef DEBUG #define debug(fmt, args...) printf(fmt, ##args) #else #define debug(fmt, args...) #endif #define FD_SIGNATURE 0x0FF0A55A #define FLREG_BASE(reg) ((reg & 0x00000fff) << 12); #define FLREG_LIMIT(reg) (((reg & 0x0fff0000) >> 4) | 0xfff); enum input_file_type_t { IF_normal, IF_fdt, IF_uboot, }; struct input_file { char *fname; unsigned int addr; enum input_file_type_t type; }; /** * find_fd() - Find the flash description in the ROM image * * @image: Pointer to image * @size: Size of image in bytes * @return pointer to structure, or NULL if not found */ static struct fdbar_t *find_fd(char *image, int size) { uint32_t *ptr, *end; /* Scan for FD signature */ for (ptr = (uint32_t *)image, end = ptr + size / 4; ptr < end; ptr++) { if (*ptr == FD_SIGNATURE) break; } if (ptr == end) { printf("No Flash Descriptor found in this image\n"); return NULL; } debug("Found Flash Descriptor signature at 0x%08lx\n", (char *)ptr - image); return (struct fdbar_t *)ptr; } /** * get_region() - Get information about the selected region * * @frba: Flash region list * @region_type: Type of region (0..MAX_REGIONS-1) * @region: Region information is written here * @return 0 if OK, else -ve */ static int get_region(struct frba_t *frba, int region_type, struct region_t *region) { if (region_type >= MAX_REGIONS) { fprintf(stderr, "Invalid region type.\n"); return -1; } region->base = FLREG_BASE(frba->flreg[region_type]); region->limit = FLREG_LIMIT(frba->flreg[region_type]); region->size = region->limit - region->base + 1; return 0; } static const char *region_name(int region_type) { static const char *const regions[] = { "Flash Descriptor", "BIOS", "Intel ME", "GbE", "Platform Data" }; assert(region_type < MAX_REGIONS); return regions[region_type]; } static const char *region_filename(int region_type) { static const char *const region_filenames[] = { "flashregion_0_flashdescriptor.bin", "flashregion_1_bios.bin", "flashregion_2_intel_me.bin", "flashregion_3_gbe.bin", "flashregion_4_platform_data.bin" }; assert(region_type < MAX_REGIONS); return region_filenames[region_type]; } static int dump_region(int num, struct frba_t *frba) { struct region_t region; int ret; ret = get_region(frba, num, ®ion); if (ret) return ret; printf(" Flash Region %d (%s): %08x - %08x %s\n", num, region_name(num), region.base, region.limit, region.size < 1 ? "(unused)" : ""); return ret; } static void dump_frba(struct frba_t *frba) { int i; printf("Found Region Section\n"); for (i = 0; i < MAX_REGIONS; i++) { printf("FLREG%d: 0x%08x\n", i, frba->flreg[i]); dump_region(i, frba); } } static void decode_spi_frequency(unsigned int freq) { switch (freq) { case SPI_FREQUENCY_20MHZ: printf("20MHz"); break; case SPI_FREQUENCY_33MHZ: printf("33MHz"); break; case SPI_FREQUENCY_50MHZ: printf("50MHz"); break; default: printf("unknown<%x>MHz", freq); } } static void decode_component_density(unsigned int density) { switch (density) { case COMPONENT_DENSITY_512KB: printf("512KiB"); break; case COMPONENT_DENSITY_1MB: printf("1MiB"); break; case COMPONENT_DENSITY_2MB: printf("2MiB"); break; case COMPONENT_DENSITY_4MB: printf("4MiB"); break; case COMPONENT_DENSITY_8MB: printf("8MiB"); break; case COMPONENT_DENSITY_16MB: printf("16MiB"); break; default: printf("unknown<%x>MiB", density); } } static void dump_fcba(struct fcba_t *fcba) { printf("\nFound Component Section\n"); printf("FLCOMP 0x%08x\n", fcba->flcomp); printf(" Dual Output Fast Read Support: %ssupported\n", (fcba->flcomp & (1 << 30)) ? "" : "not "); printf(" Read ID/Read Status Clock Frequency: "); decode_spi_frequency((fcba->flcomp >> 27) & 7); printf("\n Write/Erase Clock Frequency: "); decode_spi_frequency((fcba->flcomp >> 24) & 7); printf("\n Fast Read Clock Frequency: "); decode_spi_frequency((fcba->flcomp >> 21) & 7); printf("\n Fast Read Support: %ssupported", (fcba->flcomp & (1 << 20)) ? "" : "not "); printf("\n Read Clock Frequency: "); decode_spi_frequency((fcba->flcomp >> 17) & 7); printf("\n Component 2 Density: "); decode_component_density((fcba->flcomp >> 3) & 7); printf("\n Component 1 Density: "); decode_component_density(fcba->flcomp & 7); printf("\n"); printf("FLILL 0x%08x\n", fcba->flill); printf(" Invalid Instruction 3: 0x%02x\n", (fcba->flill >> 24) & 0xff); printf(" Invalid Instruction 2: 0x%02x\n", (fcba->flill >> 16) & 0xff); printf(" Invalid Instruction 1: 0x%02x\n", (fcba->flill >> 8) & 0xff); printf(" Invalid Instruction 0: 0x%02x\n", fcba->flill & 0xff); printf("FLPB 0x%08x\n", fcba->flpb); printf(" Flash Partition Boundary Address: 0x%06x\n\n", (fcba->flpb & 0xfff) << 12); } static void dump_fpsba(struct fpsba_t *fpsba) { int i; printf("Found PCH Strap Section\n"); for (i = 0; i < MAX_STRAPS; i++) printf("PCHSTRP%-2d: 0x%08x\n", i, fpsba->pchstrp[i]); } static const char *get_enabled(int flag) { return flag ? "enabled" : "disabled"; } static void decode_flmstr(uint32_t flmstr) { printf(" Platform Data Region Write Access: %s\n", get_enabled(flmstr & (1 << 28))); printf(" GbE Region Write Access: %s\n", get_enabled(flmstr & (1 << 27))); printf(" Intel ME Region Write Access: %s\n", get_enabled(flmstr & (1 << 26))); printf(" Host CPU/BIOS Region Write Access: %s\n", get_enabled(flmstr & (1 << 25))); printf(" Flash Descriptor Write Access: %s\n", get_enabled(flmstr & (1 << 24))); printf(" Platform Data Region Read Access: %s\n", get_enabled(flmstr & (1 << 20))); printf(" GbE Region Read Access: %s\n", get_enabled(flmstr & (1 << 19))); printf(" Intel ME Region Read Access: %s\n", get_enabled(flmstr & (1 << 18))); printf(" Host CPU/BIOS Region Read Access: %s\n", get_enabled(flmstr & (1 << 17))); printf(" Flash Descriptor Read Access: %s\n", get_enabled(flmstr & (1 << 16))); printf(" Requester ID: 0x%04x\n\n", flmstr & 0xffff); } static void dump_fmba(struct fmba_t *fmba) { printf("Found Master Section\n"); printf("FLMSTR1: 0x%08x (Host CPU/BIOS)\n", fmba->flmstr1); decode_flmstr(fmba->flmstr1); printf("FLMSTR2: 0x%08x (Intel ME)\n", fmba->flmstr2); decode_flmstr(fmba->flmstr2); printf("FLMSTR3: 0x%08x (GbE)\n", fmba->flmstr3); decode_flmstr(fmba->flmstr3); } static void dump_fmsba(struct fmsba_t *fmsba) { int i; printf("Found Processor Strap Section\n"); for (i = 0; i < 4; i++) printf("????: 0x%08x\n", fmsba->data[0]); } static void dump_jid(uint32_t jid) { printf(" SPI Component Device ID 1: 0x%02x\n", (jid >> 16) & 0xff); printf(" SPI Component Device ID 0: 0x%02x\n", (jid >> 8) & 0xff); printf(" SPI Component Vendor ID: 0x%02x\n", jid & 0xff); } static void dump_vscc(uint32_t vscc) { printf(" Lower Erase Opcode: 0x%02x\n", vscc >> 24); printf(" Lower Write Enable on Write Status: 0x%02x\n", vscc & (1 << 20) ? 0x06 : 0x50); printf(" Lower Write Status Required: %s\n", vscc & (1 << 19) ? "Yes" : "No"); printf(" Lower Write Granularity: %d bytes\n", vscc & (1 << 18) ? 64 : 1); printf(" Lower Block / Sector Erase Size: "); switch ((vscc >> 16) & 0x3) { case 0: printf("256 Byte\n"); break; case 1: printf("4KB\n"); break; case 2: printf("8KB\n"); break; case 3: printf("64KB\n"); break; } printf(" Upper Erase Opcode: 0x%02x\n", (vscc >> 8) & 0xff); printf(" Upper Write Enable on Write Status: 0x%02x\n", vscc & (1 << 4) ? 0x06 : 0x50); printf(" Upper Write Status Required: %s\n", vscc & (1 << 3) ? "Yes" : "No"); printf(" Upper Write Granularity: %d bytes\n", vscc & (1 << 2) ? 64 : 1); printf(" Upper Block / Sector Erase Size: "); switch (vscc & 0x3) { case 0: printf("256 Byte\n"); break; case 1: printf("4KB\n"); break; case 2: printf("8KB\n"); break; case 3: printf("64KB\n"); break; } } static void dump_vtba(struct vtba_t *vtba, int vtl) { int i; int num = (vtl >> 1) < 8 ? (vtl >> 1) : 8; printf("ME VSCC table:\n"); for (i = 0; i < num; i++) { printf(" JID%d: 0x%08x\n", i, vtba->entry[i].jid); dump_jid(vtba->entry[i].jid); printf(" VSCC%d: 0x%08x\n", i, vtba->entry[i].vscc); dump_vscc(vtba->entry[i].vscc); } printf("\n"); } static void dump_oem(uint8_t *oem) { int i, j; printf("OEM Section:\n"); for (i = 0; i < 4; i++) { printf("%02x:", i << 4); for (j = 0; j < 16; j++) printf(" %02x", oem[(i<<4)+j]); printf("\n"); } printf("\n"); } /** * dump_fd() - Display a dump of the full flash description * * @image: Pointer to image * @size: Size of image in bytes * @return 0 if OK, -1 on error */ static int dump_fd(char *image, int size) { struct fdbar_t *fdb = find_fd(image, size); if (!fdb) return -1; printf("FLMAP0: 0x%08x\n", fdb->flmap0); printf(" NR: %d\n", (fdb->flmap0 >> 24) & 7); printf(" FRBA: 0x%x\n", ((fdb->flmap0 >> 16) & 0xff) << 4); printf(" NC: %d\n", ((fdb->flmap0 >> 8) & 3) + 1); printf(" FCBA: 0x%x\n", ((fdb->flmap0) & 0xff) << 4); printf("FLMAP1: 0x%08x\n", fdb->flmap1); printf(" ISL: 0x%02x\n", (fdb->flmap1 >> 24) & 0xff); printf(" FPSBA: 0x%x\n", ((fdb->flmap1 >> 16) & 0xff) << 4); printf(" NM: %d\n", (fdb->flmap1 >> 8) & 3); printf(" FMBA: 0x%x\n", ((fdb->flmap1) & 0xff) << 4); printf("FLMAP2: 0x%08x\n", fdb->flmap2); printf(" PSL: 0x%04x\n", (fdb->flmap2 >> 8) & 0xffff); printf(" FMSBA: 0x%x\n", ((fdb->flmap2) & 0xff) << 4); printf("FLUMAP1: 0x%08x\n", fdb->flumap1); printf(" Intel ME VSCC Table Length (VTL): %d\n", (fdb->flumap1 >> 8) & 0xff); printf(" Intel ME VSCC Table Base Address (VTBA): 0x%06x\n\n", (fdb->flumap1 & 0xff) << 4); dump_vtba((struct vtba_t *) (image + ((fdb->flumap1 & 0xff) << 4)), (fdb->flumap1 >> 8) & 0xff); dump_oem((uint8_t *)image + 0xf00); dump_frba((struct frba_t *)(image + (((fdb->flmap0 >> 16) & 0xff) << 4))); dump_fcba((struct fcba_t *)(image + (((fdb->flmap0) & 0xff) << 4))); dump_fpsba((struct fpsba_t *) (image + (((fdb->flmap1 >> 16) & 0xff) << 4))); dump_fmba((struct fmba_t *)(image + (((fdb->flmap1) & 0xff) << 4))); dump_fmsba((struct fmsba_t *)(image + (((fdb->flmap2) & 0xff) << 4))); return 0; } /** * write_regions() - Write each region from an image to its own file * * The filename to use in each case is fixed - see region_filename() * * @image: Pointer to image * @size: Size of image in bytes * @return 0 if OK, -ve on error */ static int write_regions(char *image, int size) { struct fdbar_t *fdb; struct frba_t *frba; int ret = 0; int i; fdb = find_fd(image, size); if (!fdb) return -1; frba = (struct frba_t *)(image + (((fdb->flmap0 >> 16) & 0xff) << 4)); for (i = 0; i < MAX_REGIONS; i++) { struct region_t region; int region_fd; ret = get_region(frba, i, ®ion); if (ret) return ret; dump_region(i, frba); if (region.size <= 0) continue; region_fd = open(region_filename(i), O_WRONLY | O_CREAT | O_TRUNC, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); if (write(region_fd, image + region.base, region.size) != region.size) { perror("Error while writing"); ret = -1; } close(region_fd); } return ret; } static int perror_fname(const char *fmt, const char *fname) { char msg[strlen(fmt) + strlen(fname) + 1]; sprintf(msg, fmt, fname); perror(msg); return -1; } /** * write_image() - Write the image to a file * * @filename: Filename to use for the image * @image: Pointer to image * @size: Size of image in bytes * @return 0 if OK, -ve on error */ static int write_image(char *filename, char *image, int size) { int new_fd; debug("Writing new image to %s\n", filename); new_fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); if (new_fd < 0) return perror_fname("Could not open file '%s'", filename); if (write(new_fd, image, size) != size) return perror_fname("Could not write file '%s'", filename); close(new_fd); return 0; } /** * set_spi_frequency() - Set the SPI frequency to use when booting * * Several frequencies are supported, some of which work with fast devices. * For SPI emulators, the slowest (SPI_FREQUENCY_20MHZ) is often used. The * Intel boot system uses this information somehow on boot. * * The image is updated with the supplied value * * @image: Pointer to image * @size: Size of image in bytes * @freq: SPI frequency to use */ static void set_spi_frequency(char *image, int size, enum spi_frequency freq) { struct fdbar_t *fdb = find_fd(image, size); struct fcba_t *fcba; fcba = (struct fcba_t *)(image + (((fdb->flmap0) & 0xff) << 4)); /* clear bits 21-29 */ fcba->flcomp &= ~0x3fe00000; /* Read ID and Read Status Clock Frequency */ fcba->flcomp |= freq << 27; /* Write and Erase Clock Frequency */ fcba->flcomp |= freq << 24; /* Fast Read Clock Frequency */ fcba->flcomp |= freq << 21; } /** * set_em100_mode() - Set a SPI frequency that will work with Dediprog EM100 * * @image: Pointer to image * @size: Size of image in bytes */ static void set_em100_mode(char *image, int size) { struct fdbar_t *fdb = find_fd(image, size); struct fcba_t *fcba; fcba = (struct fcba_t *)(image + (((fdb->flmap0) & 0xff) << 4)); fcba->flcomp &= ~(1 << 30); set_spi_frequency(image, size, SPI_FREQUENCY_20MHZ); } /** * lock_descriptor() - Lock the NE descriptor so it cannot be updated * * @image: Pointer to image * @size: Size of image in bytes */ static void lock_descriptor(char *image, int size) { struct fdbar_t *fdb = find_fd(image, size); struct fmba_t *fmba; /* * TODO: Dynamically take Platform Data Region and GbE Region into * account. */ fmba = (struct fmba_t *)(image + (((fdb->flmap1) & 0xff) << 4)); fmba->flmstr1 = 0x0a0b0000; fmba->flmstr2 = 0x0c0d0000; fmba->flmstr3 = 0x08080118; } /** * unlock_descriptor() - Lock the NE descriptor so it can be updated * * @image: Pointer to image * @size: Size of image in bytes */ static void unlock_descriptor(char *image, int size) { struct fdbar_t *fdb = find_fd(image, size); struct fmba_t *fmba; fmba = (struct fmba_t *)(image + (((fdb->flmap1) & 0xff) << 4)); fmba->flmstr1 = 0xffff0000; fmba->flmstr2 = 0xffff0000; fmba->flmstr3 = 0x08080118; } /** * open_for_read() - Open a file for reading * * @fname: Filename to open * @sizep: Returns file size in bytes * @return 0 if OK, -1 on error */ int open_for_read(const char *fname, int *sizep) { int fd = open(fname, O_RDONLY); struct stat buf; if (fd == -1) return perror_fname("Could not open file '%s'", fname); if (fstat(fd, &buf) == -1) return perror_fname("Could not stat file '%s'", fname); *sizep = buf.st_size; debug("File %s is %d bytes\n", fname, *sizep); return fd; } /** * inject_region() - Add a file to an image region * * This puts a file into a particular region of the flash. Several pre-defined * regions are used. * * @image: Pointer to image * @size: Size of image in bytes * @region_type: Region where the file should be added * @region_fname: Filename to add to the image * @return 0 if OK, -ve on error */ int inject_region(char *image, int size, int region_type, char *region_fname) { struct fdbar_t *fdb = find_fd(image, size); struct region_t region; struct frba_t *frba; int region_size; int offset = 0; int region_fd; int ret; if (!fdb) exit(EXIT_FAILURE); frba = (struct frba_t *)(image + (((fdb->flmap0 >> 16) & 0xff) << 4)); ret = get_region(frba, region_type, ®ion); if (ret) return -1; if (region.size <= 0xfff) { fprintf(stderr, "Region %s is disabled in target. Not injecting.\n", region_name(region_type)); return -1; } region_fd = open_for_read(region_fname, ®ion_size); if (region_fd < 0) return region_fd; if ((region_size > region.size) || ((region_type != 1) && (region_size > region.size))) { fprintf(stderr, "Region %s is %d(0x%x) bytes. File is %d(0x%x) bytes. Not injecting.\n", region_name(region_type), region.size, region.size, region_size, region_size); return -1; } if ((region_type == 1) && (region_size < region.size)) { fprintf(stderr, "Region %s is %d(0x%x) bytes. File is %d(0x%x) bytes. Padding before injecting.\n", region_name(region_type), region.size, region.size, region_size, region_size); offset = region.size - region_size; memset(image + region.base, 0xff, offset); } if (size < region.base + offset + region_size) { fprintf(stderr, "Output file is too small. (%d < %d)\n", size, region.base + offset + region_size); return -1; } if (read(region_fd, image + region.base + offset, region_size) != region_size) { perror("Could not read file"); return -1; } close(region_fd); debug("Adding %s as the %s section\n", region_fname, region_name(region_type)); return 0; } /** * write_data() - Write some raw data into a region * * This puts a file into a particular place in the flash, ignoring the * regions. Be careful not to overwrite something important. * * @image: Pointer to image * @size: Size of image in bytes * @addr: x86 ROM address to put file. The ROM ends at * 0xffffffff so use an address relative to that. For an * 8MB ROM the start address is 0xfff80000. * @write_fname: Filename to add to the image * @offset_uboot_top: Offset of the top of U-Boot * @offset_uboot_start: Offset of the start of U-Boot * @return number of bytes written if OK, -ve on error */ static int write_data(char *image, int size, unsigned int addr, const char *write_fname, int offset_uboot_top, int offset_uboot_start) { int write_fd, write_size; int offset; write_fd = open_for_read(write_fname, &write_size); if (write_fd < 0) return write_fd; offset = (uint32_t)(addr + size); if (offset_uboot_top) { if (offset_uboot_start < offset && offset_uboot_top >= offset) { fprintf(stderr, "U-Boot image overlaps with region '%s'\n", write_fname); fprintf(stderr, "U-Boot finishes at offset %x, file starts at %x\n", offset_uboot_top, offset); return -EXDEV; } if (offset_uboot_start > offset && offset_uboot_start <= offset + write_size) { fprintf(stderr, "U-Boot image overlaps with region '%s'\n", write_fname); fprintf(stderr, "U-Boot starts at offset %x, file finishes at %x\n", offset_uboot_start, offset + write_size); return -EXDEV; } } debug("Writing %s to offset %#x\n", write_fname, offset); if (offset < 0 || offset + write_size > size) { fprintf(stderr, "Output file is too small. (%d < %d)\n", size, offset + write_size); return -1; } if (read(write_fd, image + offset, write_size) != write_size) { perror("Could not read file"); return -1; } close(write_fd); return write_size; } static int scan_ucode(const void *blob, char *ucode_base, int *countp, const char **datap, int *data_sizep) { const char *data = NULL; int node, count; int data_size; char *ucode; for (node = 0, count = 0, ucode = ucode_base; node >= 0; count++) { node = fdt_node_offset_by_compatible(blob, node, "intel,microcode"); if (node < 0) break; data = fdt_getprop(blob, node, "data", &data_size); if (!data) { debug("Missing microcode data in FDT '%s': %s\n", fdt_get_name(blob, node, NULL), fdt_strerror(data_size)); return -ENOENT; } if (ucode_base) memcpy(ucode, data, data_size); ucode += data_size; } if (countp) *countp = count; if (datap) *datap = data; if (data_sizep) *data_sizep = data_size; return ucode - ucode_base; } static int remove_ucode(char *blob) { int node, count; int ret; /* Keep going until we find no more microcode to remove */ do { for (node = 0, count = 0; node >= 0;) { int ret; node = fdt_node_offset_by_compatible(blob, node, "intel,microcode"); if (node < 0) break; ret = fdt_delprop(blob, node, "data"); /* * -FDT_ERR_NOTFOUND means we already removed the * data for this one, so we just continue. * 0 means we did remove it, so offsets may have * changed and we need to restart our scan. * Anything else indicates an error we should report. */ if (ret == -FDT_ERR_NOTFOUND) continue; else if (!ret) node = 0; else return ret; } } while (count); /* Pack down to remove excees space */ ret = fdt_pack(blob); if (ret) return ret; return fdt_totalsize(blob); } static int write_ucode(char *image, int size, struct input_file *fdt, int fdt_size, unsigned int ucode_ptr, int collate_ucode) { const char *data = NULL; char *ucode_buf; const void *blob; char *ucode_base; uint32_t *ptr; int ucode_size; int data_size; int offset; int count; int ret; blob = (void *)image + (uint32_t)(fdt->addr + size); debug("DTB at %lx\n", (char *)blob - image); /* Find out about the micrcode we have */ ucode_size = scan_ucode(blob, NULL, &count, &data, &data_size); if (ucode_size < 0) return ucode_size; if (!count) { debug("No microcode found in FDT\n"); return -ENOENT; } if (count > 1 && !collate_ucode) { fprintf(stderr, "Cannot handle multiple microcode blocks - please use -C flag to collate them\n"); return -EMLINK; } /* * Collect the microcode into a buffer, remove it from the device * tree and place it immediately above the (now smaller) device tree. */ if (collate_ucode && count > 1) { ucode_buf = malloc(ucode_size); if (!ucode_buf) { fprintf(stderr, "Out of memory for microcode (%d bytes)\n", ucode_size); return -ENOMEM; } ret = scan_ucode(blob, ucode_buf, NULL, NULL, NULL); if (ret < 0) return ret; /* Remove the microcode from the device tree */ ret = remove_ucode((char *)blob); if (ret < 0) { debug("Could not remove FDT microcode: %s\n", fdt_strerror(ret)); return -EINVAL; } debug("Collated %d microcode block(s)\n", count); debug("Device tree reduced from %x to %x bytes\n", fdt_size, ret); fdt_size = ret; /* * Place microcode area immediately above the FDT, aligned * to a 16-byte boundary. */ ucode_base = (char *)(((unsigned long)blob + fdt_size + 15) & ~15); data = ucode_base; data_size = ucode_size; memcpy(ucode_base, ucode_buf, ucode_size); free(ucode_buf); } offset = (uint32_t)(ucode_ptr + size); ptr = (void *)image + offset; ptr[0] = (data - image) - size; ptr[1] = data_size; debug("Wrote microcode pointer at %x: addr=%x, size=%x\n", ucode_ptr, ptr[0], ptr[1]); return (collate_ucode ? data + data_size : (char *)blob + fdt_size) - image; } /** * write_uboot() - Write U-Boot, device tree and microcode pointer * * This writes U-Boot into a place in the flash, followed by its device tree. * The microcode pointer is written so that U-Boot can find the microcode in * the device tree very early in boot. * * @image: Pointer to image * @size: Size of image in bytes * @uboot: Input file information for u-boot.bin * @fdt: Input file information for u-boot.dtb * @ucode_ptr: Address in U-Boot where the microcode pointer should be placed * @return 0 if OK, -ve on error */ static int write_uboot(char *image, int size, struct input_file *uboot, struct input_file *fdt, unsigned int ucode_ptr, int collate_ucode, int *offset_uboot_top, int *offset_uboot_start) { int uboot_size, fdt_size; int uboot_top; uboot_size = write_data(image, size, uboot->addr, uboot->fname, 0, 0); if (uboot_size < 0) return uboot_size; fdt->addr = uboot->addr + uboot_size; debug("U-Boot size %#x, FDT at %#x\n", uboot_size, fdt->addr); fdt_size = write_data(image, size, fdt->addr, fdt->fname, 0, 0); if (fdt_size < 0) return fdt_size; uboot_top = (uint32_t)(fdt->addr + size) + fdt_size; if (ucode_ptr) { uboot_top = write_ucode(image, size, fdt, fdt_size, ucode_ptr, collate_ucode); if (uboot_top < 0) return uboot_top; } if (offset_uboot_top && offset_uboot_start) { *offset_uboot_top = uboot_top; *offset_uboot_start = (uint32_t)(uboot->addr + size); } return 0; } static void print_version(void) { printf("ifdtool v%s -- ", IFDTOOL_VERSION); printf("Copyright (C) 2014 Google Inc.\n\n"); printf("SPDX-License-Identifier: GPL-2.0+\n"); } static void print_usage(const char *name) { printf("usage: %s [-vhdix?] []\n", name); printf("\n" " -d | --dump: dump intel firmware descriptor\n" " -x | --extract: extract intel fd modules\n" " -i | --inject : inject file into region \n" " -w | --write : write file to appear at memory address \n" " multiple files can be written simultaneously\n" " -s | --spifreq <20|33|50> set the SPI frequency\n" " -e | --em100 set SPI frequency to 20MHz and disable\n" " Dual Output Fast Read Support\n" " -l | --lock Lock firmware descriptor and ME region\n" " -u | --unlock Unlock firmware descriptor and ME region\n" " -r | --romsize Specify ROM size\n" " -D | --write-descriptor Write descriptor at base\n" " -c | --create Create a new empty image\n" " -v | --version: print the version\n" " -h | --help: print this help\n\n" " is one of Descriptor, BIOS, ME, GbE, Platform\n" "\n"); } /** * get_two_words() - Convert a string into two words separated by : * * The supplied string is split at ':', two substrings are allocated and * returned. * * @str: String to split * @firstp: Returns first string * @secondp: Returns second string * @return 0 if OK, -ve if @str does not have a : */ static int get_two_words(const char *str, char **firstp, char **secondp) { const char *p; p = strchr(str, ':'); if (!p) return -1; *firstp = strdup(str); (*firstp)[p - str] = '\0'; *secondp = strdup(p + 1); return 0; } int main(int argc, char *argv[]) { int opt, option_index = 0; int mode_dump = 0, mode_extract = 0, mode_inject = 0; int mode_spifreq = 0, mode_em100 = 0, mode_locked = 0; int mode_unlocked = 0, mode_write = 0, mode_write_descriptor = 0; int create = 0, collate_ucode = 0; char *region_type_string = NULL, *inject_fname = NULL; char *desc_fname = NULL, *addr_str = NULL; int region_type = -1, inputfreq = 0; enum spi_frequency spifreq = SPI_FREQUENCY_20MHZ; struct input_file input_file[WRITE_MAX], *ifile, *fdt = NULL; unsigned char wr_idx, wr_num = 0; int rom_size = -1; bool write_it; char *filename; char *outfile = NULL; struct stat buf; int size = 0; unsigned int ucode_ptr = 0; bool have_uboot = false; int bios_fd; char *image; int ret; static struct option long_options[] = { {"create", 0, NULL, 'c'}, {"collate-microcode", 0, NULL, 'C'}, {"dump", 0, NULL, 'd'}, {"descriptor", 1, NULL, 'D'}, {"em100", 0, NULL, 'e'}, {"extract", 0, NULL, 'x'}, {"fdt", 1, NULL, 'f'}, {"inject", 1, NULL, 'i'}, {"lock", 0, NULL, 'l'}, {"microcode", 1, NULL, 'm'}, {"romsize", 1, NULL, 'r'}, {"spifreq", 1, NULL, 's'}, {"unlock", 0, NULL, 'u'}, {"uboot", 1, NULL, 'U'}, {"write", 1, NULL, 'w'}, {"version", 0, NULL, 'v'}, {"help", 0, NULL, 'h'}, {0, 0, 0, 0} }; while ((opt = getopt_long(argc, argv, "cCdD:ef:hi:lm:r:s:uU:vw:x?", long_options, &option_index)) != EOF) { switch (opt) { case 'c': create = 1; break; case 'C': collate_ucode = 1; break; case 'd': mode_dump = 1; break; case 'D': mode_write_descriptor = 1; desc_fname = optarg; break; case 'e': mode_em100 = 1; break; case 'i': if (get_two_words(optarg, ®ion_type_string, &inject_fname)) { print_usage(argv[0]); exit(EXIT_FAILURE); } if (!strcasecmp("Descriptor", region_type_string)) region_type = 0; else if (!strcasecmp("BIOS", region_type_string)) region_type = 1; else if (!strcasecmp("ME", region_type_string)) region_type = 2; else if (!strcasecmp("GbE", region_type_string)) region_type = 3; else if (!strcasecmp("Platform", region_type_string)) region_type = 4; if (region_type == -1) { fprintf(stderr, "No such region type: '%s'\n\n", region_type_string); print_usage(argv[0]); exit(EXIT_FAILURE); } mode_inject = 1; break; case 'l': mode_locked = 1; break; case 'm': ucode_ptr = strtoul(optarg, NULL, 0); break; case 'r': rom_size = strtol(optarg, NULL, 0); debug("ROM size %d\n", rom_size); break; case 's': /* Parse the requested SPI frequency */ inputfreq = strtol(optarg, NULL, 0); switch (inputfreq) { case 20: spifreq = SPI_FREQUENCY_20MHZ; break; case 33: spifreq = SPI_FREQUENCY_33MHZ; break; case 50: spifreq = SPI_FREQUENCY_50MHZ; break; default: fprintf(stderr, "Invalid SPI Frequency: %d\n", inputfreq); print_usage(argv[0]); exit(EXIT_FAILURE); } mode_spifreq = 1; break; case 'u': mode_unlocked = 1; break; case 'v': print_version(); exit(EXIT_SUCCESS); break; case 'w': case 'U': case 'f': ifile = &input_file[wr_num]; mode_write = 1; if (wr_num < WRITE_MAX) { if (get_two_words(optarg, &addr_str, &ifile->fname)) { print_usage(argv[0]); exit(EXIT_FAILURE); } ifile->addr = strtoll(optarg, NULL, 0); ifile->type = opt == 'f' ? IF_fdt : opt == 'U' ? IF_uboot : IF_normal; if (ifile->type == IF_fdt) fdt = ifile; else if (ifile->type == IF_uboot) have_uboot = true; wr_num++; } else { fprintf(stderr, "The number of files to write simultaneously exceeds the limitation (%d)\n", WRITE_MAX); } break; case 'x': mode_extract = 1; break; case 'h': case '?': default: print_usage(argv[0]); exit(EXIT_SUCCESS); break; } } if (mode_locked == 1 && mode_unlocked == 1) { fprintf(stderr, "Locking/Unlocking FD and ME are mutually exclusive\n"); exit(EXIT_FAILURE); } if (mode_inject == 1 && mode_write == 1) { fprintf(stderr, "Inject/Write are mutually exclusive\n"); exit(EXIT_FAILURE); } if ((mode_dump + mode_extract + mode_inject + (mode_spifreq | mode_em100 | mode_unlocked | mode_locked)) > 1) { fprintf(stderr, "You may not specify more than one mode.\n\n"); print_usage(argv[0]); exit(EXIT_FAILURE); } if ((mode_dump + mode_extract + mode_inject + mode_spifreq + mode_em100 + mode_locked + mode_unlocked + mode_write + mode_write_descriptor) == 0 && !create) { fprintf(stderr, "You need to specify a mode.\n\n"); print_usage(argv[0]); exit(EXIT_FAILURE); } if (create && rom_size == -1) { fprintf(stderr, "You need to specify a rom size when creating.\n\n"); exit(EXIT_FAILURE); } if (optind + 1 != argc) { fprintf(stderr, "You need to specify a file.\n\n"); print_usage(argv[0]); exit(EXIT_FAILURE); } if (have_uboot && !fdt) { fprintf(stderr, "You must supply a device tree file for U-Boot\n\n"); print_usage(argv[0]); exit(EXIT_FAILURE); } filename = argv[optind]; if (optind + 2 != argc) outfile = argv[optind + 1]; if (create) bios_fd = open(filename, O_WRONLY | O_CREAT, 0666); else bios_fd = open(filename, outfile ? O_RDONLY : O_RDWR); if (bios_fd == -1) { perror("Could not open file"); exit(EXIT_FAILURE); } if (!create) { if (fstat(bios_fd, &buf) == -1) { perror("Could not stat file"); exit(EXIT_FAILURE); } size = buf.st_size; } debug("File %s is %d bytes\n", filename, size); if (rom_size == -1) rom_size = size; image = malloc(rom_size); if (!image) { printf("Out of memory.\n"); exit(EXIT_FAILURE); } memset(image, '\xff', rom_size); if (!create && read(bios_fd, image, size) != size) { perror("Could not read file"); exit(EXIT_FAILURE); } if (size != rom_size) { debug("ROM size changed to %d bytes\n", rom_size); size = rom_size; } write_it = true; ret = 0; if (mode_dump) { ret = dump_fd(image, size); write_it = false; } if (mode_extract) { ret = write_regions(image, size); write_it = false; } if (mode_write_descriptor) ret = write_data(image, size, -size, desc_fname, 0, 0); if (mode_inject) ret = inject_region(image, size, region_type, inject_fname); if (mode_write) { int offset_uboot_top = 0; int offset_uboot_start = 0; for (wr_idx = 0; wr_idx < wr_num; wr_idx++) { ifile = &input_file[wr_idx]; if (ifile->type == IF_fdt) { continue; } else if (ifile->type == IF_uboot) { ret = write_uboot(image, size, ifile, fdt, ucode_ptr, collate_ucode, &offset_uboot_top, &offset_uboot_start); } else { ret = write_data(image, size, ifile->addr, ifile->fname, offset_uboot_top, offset_uboot_start); } if (ret < 0) break; } } if (mode_spifreq) set_spi_frequency(image, size, spifreq); if (mode_em100) set_em100_mode(image, size); if (mode_locked) lock_descriptor(image, size); if (mode_unlocked) unlock_descriptor(image, size); if (write_it) { if (outfile) { ret = write_image(outfile, image, size); } else { if (lseek(bios_fd, 0, SEEK_SET)) { perror("Error while seeking"); ret = -1; } if (write(bios_fd, image, size) != size) { perror("Error while writing"); ret = -1; } } } free(image); close(bios_fd); return ret < 0 ? 1 : 0; }