/* * (C) Copyright 2008 * Gary Jennejohn, DENX Software Engineering GmbH * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ U-Boot console multiplexing =========================== HOW CONSOLE MULTIPLEXING WORKS ------------------------------ This functionality is controlled with CONFIG_CONSOLE_MUX in the board configuration file. Two new files, common/iomux.c and include/iomux.h, contain the heart (iomux_doenv()) of the environment setting implementation. iomux_doenv() is called in common/cmd_nvedit.c to handle setenv and in common/console.c in console_init_r() during bootup to initialize stdio_devices[]. A user can use a comma-separated list of devices to set stdin, stdout and stderr. For example: "setenv stdin serial,nc". NOTE: No spaces are allowed around the comma(s)! The length of the list is limited by malloc(), since the array used is allocated and freed dynamically. It should be possible to specify any device which console_assign() finds acceptable, but the code has only been tested with serial and nc. iomux_doenv() prevents multiple use of the same device, e.g. "setenv stdin nc,nc,serial" will discard the second nc. iomux_doenv() is not able to modify the environment, however, so that "pri stdin" still shows "nc,nc,serial". The major change in common/console.c was to modify fgetc() to call the iomux_tstc() routine in a for-loop. iomux_tstc() in turn calls the tstc() routine for every registered device, but exits immediately when one of them returns true. fgetc() then calls iomux_getc(), which calls the corresponding getc() routine. fgetc() hangs in the for-loop until iomux_tstc() returns true and the input can be retrieved. Thus, a user can type into any device registered for stdin. No effort has been made to demulitplex simultaneous input from multiple stdin devices. fputc() and fputs() have been modified to call iomux_putc() and iomux_puts() respectively, which call the corresponding output routines for every registered device. Thus, a user can see the ouput for any device registered for stdout or stderr on all devices registered for stdout or stderr. As an example, if stdin=serial,nc and stdout=serial,nc then all output for serial, e.g. echos of input on serial, will appear on serial and nc. Just as with the old console code, this statement is still true: If not defined in the environment, the first input device is assigned to the 'stdin' file, the first output one to 'stdout' and 'stderr'. If CONFIG_SYS_CONSOLE_IS_IN_ENV is defined then multiple input/output devices can be set at boot time if defined in the environment. CAVEATS ------- Note that common/iomux.c calls console_assign() for every registered device as it is discovered. This means that the environment settings for application consoles will be set to the last device in the list. On a slow machine, such as MPC852T clocked at 66MHz, the overhead associated with calling tstc() and then getc() means that copy&paste will normally not work, even when stdin=stdout=stderr=serial. On a faster machine, such as a sequoia, cut&paste of longer (about 80 characters) lines works fine when serial is the only device used. Using nc as a stdin device results in even more overhead because nc_tstc() is quite slow. Even on a sequoia cut&paste does not work on the serial interface when nc is added to stdin, although there is no character loss using the ethernet interface for input. In this test case stdin=serial,nc and stdout=serial. In addition, the overhead associated with sending to two devices, when one of them is nc, also causes problems. Even on a sequoia cut&paste does not work on the serial interface (stdin=serial) when nc is added to stdout (stdout= serial,nc).