JFFS2 NAND support: To ebable, use the following #define in the board configuration file: #define CONFIG_JFFS2_NAND 1 Configuration of partitions is similar to how this is done in U-Boot for JFFS2 on top NOR flash. If a single partition is used, it can be configured using the following #defines in the configuration file: #define CONFIG_JFFS2_NAND_DEV 0 /* nand device jffs2 lives on */ #define CONFIG_JFFS2_NAND_OFF 0 /* start of jffs2 partition */ #define CONFIG_JFFS2_NAND_SIZE 2*1024*1024 /* size of jffs2 partition */ If more than a single partition is desired, the user can define a CONFIG_SYS_JFFS_CUSTOM_PART macro and implement a struct part_info* jffs2_part_info(int part_num) function in a board-specific module. An example of such function is available in common/cmd_jffs2.c The default configuration for the DAVE board has a single JFFS2 partition of 2 MB size.