From 8f6edf6d30cc22a4231c5dd97a3bd82803d8f08c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 10 Sep 2015 20:45:25 -0300 Subject: pcie_imx: Use 'ms' for milliseconds milliseconds should be written as 'ms' instead of 'mS'. Signed-off-by: Fabio Estevam Tested-by: Marek Vasut --- drivers/pci/pcie_imx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c index ca485ba90c..1568f20c1a 100644 --- a/drivers/pci/pcie_imx.c +++ b/drivers/pci/pcie_imx.c @@ -495,7 +495,7 @@ __weak int imx6_pcie_toggle_reset(void) * * The PCIe #PERST reset line _MUST_ be connected, otherwise your * design does not conform to the specification. You must wait at - * least 20 mS after de-asserting the #PERST so the EP device can + * least 20 ms after de-asserting the #PERST so the EP device can * do self-initialisation. * * In case your #PERST pin is connected to a plain GPIO pin of the @@ -506,7 +506,7 @@ __weak int imx6_pcie_toggle_reset(void) * In case your #PERST toggling logic is more complex, for example * connected via CPLD or somesuch, you can override this function * in your board file and implement reset logic as needed. You must - * not forget to wait at least 20 mS after de-asserting #PERST in + * not forget to wait at least 20 ms after de-asserting #PERST in * this case either though. * * In case your #PERST line of the PCIe EP device is not connected @@ -538,7 +538,7 @@ static int imx6_pcie_deassert_core_reset(void) /* * Wait for the clock to settle a bit, when the clock are sourced - * from the CPU, we need about 30mS to settle. + * from the CPU, we need about 30 ms to settle. */ mdelay(50); -- cgit v1.2.3