From 16ac90c7ee6fe973ee86fa9b08f876e5c33751bc Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Tue, 10 Feb 2015 17:10:13 +0100 Subject: KM/IVM: split the IVM reading and parsing in 2 parts This allows to first read the IVM content (earlier in the boot sequence) and define the ethaddr env variable thanks to the ivm_read_eepromi(). Later, the IVM content can be parsed and used to define some hush variables, when the hush subsystem is available thanks to ivm_analyze_eeprom(). To avoid the HW read to happen twice, the buffer passed to ivm_read_eeprom() has to be reused by ivm_analyze_eeprom (and thus allocated before calling ivm_read_eeprom()). Signed-off-by: Valentin Longchamp --- board/keymile/common/common.h | 2 + board/keymile/common/ivm.c | 86 ++++++++++++++++++++++++++++++------------- 2 files changed, 63 insertions(+), 25 deletions(-) (limited to 'board/keymile') diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h index e075f4687b..7e16d2570b 100644 --- a/board/keymile/common/common.h +++ b/board/keymile/common/common.h @@ -127,6 +127,8 @@ struct bfticu_iomap { int ethernet_present(void); int ivm_read_eeprom(void); +int ivm_simple_read_eeprom(unsigned char *buf, int len); +int ivm_analyze_eeprom(unsigned char *buf, int len); int trigger_fpga_config(void); int wait_for_fpga_config(void); diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c index b6b19ccb8e..9abc09abc6 100644 --- a/board/keymile/common/ivm.c +++ b/board/keymile/common/ivm.c @@ -10,6 +10,8 @@ #include #include "common.h" +#define MAC_STR_SZ 20 + static int ivm_calc_crc(unsigned char *buf, int len) { const unsigned short crc_tab[16] = { @@ -185,45 +187,37 @@ static int ivm_check_crc(unsigned char *buf, int block) return 0; } -static int calculate_mac_offset(unsigned char *valbuf, unsigned char *buf, +/* take care of the possible MAC address offset and the IVM content offset */ +static int process_mac(unsigned char *valbuf, unsigned char *buf, int offset) { + unsigned char mac[6]; unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6]; - if (offset == 0) - return 0; + /* use an intermediate buffer, to not change IVM content + * MAC address is at offset 1 + */ + memcpy(mac, buf+1, 6); - val += offset; - buf[4] = (val >> 16) & 0xff; - buf[5] = (val >> 8) & 0xff; - buf[6] = val & 0xff; - sprintf((char *)valbuf, "%pM", buf + 1); + if (offset) { + val += offset; + mac[3] = (val >> 16) & 0xff; + mac[4] = (val >> 8) & 0xff; + mac[5] = val & 0xff; + } + + sprintf((char *)valbuf, "%pM", mac); return 0; } static int ivm_analyze_block2(unsigned char *buf, int len) { - unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN]; + unsigned char valbuf[MAC_STR_SZ]; unsigned long count; /* IVM_MAC Adress begins at offset 1 */ sprintf((char *)valbuf, "%pM", buf + 1); ivm_set_value("IVM_MacAddress", (char *)valbuf); - /* if an offset is defined, add it */ - calculate_mac_offset(buf, valbuf, CONFIG_PIGGY_MAC_ADRESS_OFFSET); -#ifdef MACH_TYPE_KM_KIRKWOOD - setenv((char *)"ethaddr", (char *)valbuf); -#else - if (getenv("ethaddr") == NULL) - setenv((char *)"ethaddr", (char *)valbuf); -#endif -#ifdef CONFIG_KMVECT1 -/* KMVECT1 has two ethernet interfaces */ - if (getenv("eth1addr") == NULL) { - calculate_mac_offset(buf, valbuf, 1); - setenv((char *)"eth1addr", (char *)valbuf); - } -#endif /* IVM_MacCount */ count = (buf[10] << 24) + (buf[11] << 16) + @@ -236,7 +230,7 @@ static int ivm_analyze_block2(unsigned char *buf, int len) return 0; } -static int ivm_analyze_eeprom(unsigned char *buf, int len) +int ivm_analyze_eeprom(unsigned char *buf, int len) { unsigned short val; unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN]; @@ -296,6 +290,48 @@ static int ivm_analyze_eeprom(unsigned char *buf, int len) return 0; } +static int ivm_populate_env(unsigned char *buf, int len) +{ + unsigned char *page2; + unsigned char valbuf[MAC_STR_SZ]; + + /* do we have the page 2 filled ? if not return */ + if (ivm_check_crc(buf, 2)) + return 0; + page2 = &buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN*2]; + + /* if an offset is defined, add it */ + process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET); + if (getenv("ethaddr") == NULL) + setenv((char *)"ethaddr", (char *)valbuf); +#ifdef CONFIG_KMVECT1 +/* KMVECT1 has two ethernet interfaces */ + if (getenv("eth1addr") == NULL) { + process_mac(valbuf, page2, 1); + setenv((char *)"eth1addr", (char *)valbuf); + } +#endif + + return 0; +} + +int ivm_simple_read_eeprom(unsigned char *buf, int len) +{ + int ret; + + i2c_set_bus_num(CONFIG_KM_IVM_BUS); + /* add deblocking here */ + i2c_make_abort(); + + ret = i2c_read(CONFIG_SYS_IVM_EEPROM_ADR, 0, 1, buf, len); + if (ret != 0) { + printf("Error reading EEprom\n"); + return -2; + } + + return ivm_populate_env(buf, len); +} + int ivm_read_eeprom(void) { uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN]; -- cgit v1.2.3